Total 62,087 design engineer job vacancies in Singapore

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Provide presales support by solving technical business solutions for the client.
• Responsible for product demonstration, proposal writing, creating compliance table, training and product enablement.
• Develop working proficiency and obtain certifications on assigned products and technologies.
• Conduct hands-on POC independently and present vendor’s solution to partners and end-users.

Requirements:

• Diploma in Computer Studies or equivalent
• At least 2 years of presales experience in IT network and Cybersecurity domain.
• Good knowledge of security and networking infrastructure environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description:

• Carry out installation and commissioning of air compressors and related systems at customer sites.
• Perform scheduled preventative maintenance (PM) on air compressor systems.
• Diagnose and resolve mechanical, electrical, and pneumatic issues in air compressor systems.
• Provide technical advice to clients on the proper use and maintenance of air compressor systems if necessary.
• Produce timely and detailed service reports.
• Maintain an inventory of parts, tools, and equipment required for on-site repairs.

Job Requirement:

• Good interpersonal and communication skill
• Possess valid class 3 license
• Willing to travel on site aif needed
• Must have hands on experience in servicing air compressor

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

• Support component selection, engineering evaluation, and testing of parts and sub-modules for vision inspection equipment.
• Develop electrical parts and sub-modules for vision inspection equipment.
• Update product design documents, drawings, and BOM (Bill of Materials).

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent.
• At least 2 years of relevant working experience
• Proficient in CAD software for electrical and schematic design, as well as PC hardware, Windows OS, and software.
• Knowledge in PCB/PCBA design, fabrication, and testing processes is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Information :

Working Hours : Mon~Fri 8:15am to 5:45pm

*Might required to work onboard the vessel and travel occasionally.*

Responsibilities :

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Requirements :

1. 2 years QA Experience in Marine or Industrial

2. Diploma in Electrical Engineering or ITE with relevant experiences

3. Able to speak Chinese

4. Required to work onboard the vessel and travel occasionally.

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

Job Scope:

• Design and develop mechanical and electrical systems for buildings and infrastructure
• Conduct feasibility studies and cost estimates for M&E projects
• Collaborate with architects, engineers, and contractors to ensure project alignment
• Prepare technical specifications and project documentation
• Supervise installation, testing, and commissioning of M&E systems
• Ensure compliance with relevant codes, standards, and regulations
• Perform site inspections and quality assurance checks
• Troubleshoot and resolve technical issues during the project lifecycle
• Monitor project progress and manage budgets effectively

Requirements:

• Possess Diploma/Degree/ in Electrical/Mechanical or equivalent professional qualification
• Proficient in BIM software and AUTOCAD will be an added advantage
• Good interpersonal and communication skills
• Capable of leading CSD/SEM coordination, design interface, coordination for construction of transit project, chair and lead coordination meeting.
• Minimum 5 years’ experience and at least 1 LTA MRT underground projects after tertiary education in related fields for construction supervision of similar scale and complexity.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Company Profile

M3’s client is an established company with many years of experience in the spray painting and powder coating services in Singapore. They specialize in coating for electrical & electronics consumer products, life science equipment, computer casing and machinery with all possible coating methodology.

Company Location

Woodlands

Working Hours

Mon – Fri: 830am – 530pm

5 day work week

Job Responsibilities

• Develop and optimize sheet metal manufacturing processes such as cutting, bending, stamping, punching, forming, welding, and assembling.
• Select appropriate tools, machinery, and materials for production.
• Create and refine process documentation, including process flowcharts, work instructions, and standard operating procedures (SOPs).

Job Requirements

• Technical Knowledge: Expertise in sheet metal materials, properties, and forming techniques.
• CAD/CAM Proficiency: Familiarity with software like SolidWorks, AutoCAD, or similar for design and simulation.
• Able to interpret engineering 2d Drawings.

Sophia Lu

R1100200

Senior Recruiter

• $2000 to $3000 + OT
• Address: Jalan Bukit Merah
• 5 Days 8.30am to 6pm

Requirements:

• At least ITE or Diploma in Electrical / Electronics
• 1 year working experience in installation in the field of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC literate
• Must have Class 3 license
• Knowledge of electrical & electronics

Responsibilities:

• Report to the Asst. Service Manager
• Responsible for project, implementation, installation, testing & commissioning of the system
• To carry out the maintenance works and services according to the maintenance contract.
• To manage and supervise the work progress of each project site by attending regular site meetings, coordinating with appointed sub-contractors of various services to see to ensure that projects are completed on schedule.
• To ensure proper and accurate records and documentations for the repair & servicing
• To standby and attend service calls

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee (Ashley) Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Senior M&E Engineer | Up to $6k | 5 Days | City Hall

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm
Office at The Adelphi (City Hall)
Salary: $5000 to $6000

Requirements
At least 3 years relevant experience

Job scope
Generate M&E co-ordination shop drawings.
Evaluate and resolve M&E problems with consultants and sub-contractors.
Attend principal meetings with client and consultants.
Prepare M&E progress report or any other reports required by the client or consultants.
Collect operational manuals from suppliers / sub-contractors on completion of project for submission.
Check and ensure compliance with the requirements of ISO 9000, ISO 14001 and OHSAS 18001.
Collaborate with site engineer to resolve problem and co-chair meeting monthly.
Propose risk assessments based on tender drawings and documents.
Develop VCED, including cost-effective solutions for M&E.
Review M&E work schedules and lead times to create suitable project schedules using Microsoft Project (or equivalent) for tender projects.
Assist in tendering work by proposing appropriate architectural and C&S solutions, including necessary plinths, access panels, structural openings, dog houses, make-good areas, and other related elements.
Attend site surveys and ensure proper methods of statement and material shifting are in place.
Review all VOs on-site and evaluate costs based on POs and tender clarifications.
Collaborate with the Planning and QS Departments on related matters.
Prepare Tender presentation slides and present M&E-related items to the client during interviews.
Full M&E functions as designated and not limits to other general assigned duties.

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769

Position title: Sales Engineer
Location: Loyang Way
Working Days: Mon - Fri
Working hours: 830 a.m. to 530p.m.
Salary: $3,000 - $4,500 (depends on experience)

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up to date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel:

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Job Description

• Conduct workshops and lead discussions with customers for business requirements
• Perform feasibility study and fit/gap analysis on the requirements
• Liaise with subject matter experts/technical team for the design of solutions
• Perform system configuration and run the unit testing
• Able to coordinate and organize systems integration testing with external parties
• Coordinate and assist the customers during user acceptance testing.
• Coordinate and assist in the reporting of vulnerability assessment and penetration testing
• Work with technical team to resolve issue/bug fixes
• Conduct user training session
• Support UAT & PRD deployment
• Documentation of material required for deliverable (Functional Specification, Test Plan, Test Scripts, Training Material etc.)
• Assist in project management activities by supporting the Project Manager
• Mentor and guide new or junior colleagues
• Perform Ad hoc tasks not limited to the list of responsibilities mentioned above.

Requirements

• Preferably prior business analyst or consulting working experience
• Degree or Diploma in Computer Science, Information Systems, Information/Infocomm Technology, Computer or Electronics Engineering or related discipline.
• Experience in programming languages such as Java and .NET is preferred.
• 2 Years working experience.
• Excellent communication and collaboration skills to work with customers, internal teams and external vendors
• An ability to articulate and clearly communicate complex problems and solutions in a simple and logical manner
• Strong analytical, problem-solving skills and detail oriented
• Able to work independently and as part of a team

• Basic: $2,400 - $2,800
• Working Hours: 5 Days Mon-Fri (830am to 530pm)
• Location: Jalan Kilang Timor, Redhill (Office) / Current project - Jurong or Woodlands Area

Responsibilities

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Documentation on project progress and damage;
• Any other related duties as assigned.

Requirement

• Diploma in Mechanical Engineering or related field.
• Training provided.
• Willing to work in Engineering/Construction environment.

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5000 + $200 (site allowance)

Responsibilities:

• Lead daily operation as an HSE Production Engineer to ensure Safety in both daily operation and construction projects at site.
• Lead HSE aspect of operation in risk assessment, Hazop study for new modification projects, changes to operating procedures, site construction activities.
• Review and make list of high-risk activities in the process operation based on Hazop study, have regular meeting with production manager and make plan to improve safety level in such areas of operation.
• Coordinate closely with day production & logistics members for HSE aspect of process operation and ensure safe work procedures are followed.
• Study and review all the safety observation feedback and prioritize based on level of risk to follow up through MOC process. Ensure improvement items are followed by keeping records and timeline.
• Work together with project engineers, production members and maintenance coordinator to ensure safety related projects are followed and implemented in a timely manner.
• Review the emergency and disaster prevention procedures to ensure procedures stay relevant to current operation and up to date.
• Lead and enhance any other HSE related improvement projects/activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Working experience in the chemical industry
• Deep knowledge of Safety legislation and regulations in the chemical industry
• Diploma / Degree in Engineering, health, safety, or environmental field of study

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

JD:

• Supervise & Coordinate project's day to day activities including installation and coordination with consultants, main contractors and subcontractors.
• Follow up project schedule by monitoring project progress; coordinating activities; resolving problems on time to ensure the project progress on time.
• Determines project schedule by studying project plans and specifications; calculating time requirements; sequencing project elements.
• Guide, provide inputs and comments, for the drafter to prepare installation plan drawings, detailed drawings for mechanical parts like piping layout, piping isometric drawing, pipe supports, process and mechanical plan drawings.
• Controls project plan by reviewing design, specifications, and plan & schedule changes; recommending actions.
• Check, confirm all safety documents and issue work permits to contractors in collaboration with site safety officers, work permit requirements will be trained.
• Assist project manager or procurement incharge in preparation of tender documentation, procurement specification and Bill of quantity.
• Attend the weekly and monthly project meetings to update the status and activity of the project.
• Prepares weekly or monthly project status reports by collecting, analyzing, and summarizing information and trends, recommending actions.
• Manage and coordinate vendors and suppliers during commissioning and testing of the equipment and systems.
• Maintains site safe condition and clean working environment by enforcing internal procedures, rules and regulations.
• Maintains product and company reputation by complying with state and company policy and regulations.
• Contributes to project team effort by accomplishing related results as needed.
• Assist project manager in the preparation of project Capex, budget estimation and cost allocation.
• Conduct Toolbox meetings with safety officers onsite and maintain records.
• Procurement and sourcing of equipment and materials.
• Able to work with drafters to produce Piping drawings, installation drawings, details design.

Requirements:

• Bachelor's degree in Mechanical or equivalent engineering education.
• More than 5 years experience working on site installation coordination and project supervision.
• Experience working at process/equipment construction site, plate installation, EPC, or equivalent.
• With experience in giving inputs in technical design and technical document preparations.
• With experience in piping installation, equipment installation, pipe routing.
• Ability to read, understand & demonstrate the P&ID and PFD drawings to site work.
• Proficient to read and understand engineering plan drawings like piping and pipe support plan, equipment layout mechanical installation plan.

Job Duties

• Reports to Project Manager.
• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programs.
• Liaise with Consultants on technical issues and coordinate the site activities with subcontractors.
• Lead a group of supervisors and ensure site progress is on schedule.
• Maintain quality standards and carry out site inspections.
• Ensure compliance with EHS requirements, regulations, and best practices throughout the project lifecycle.
• Provide technical guidance during project design and construction phases,resolving technical issues promptly and effectively.
• Support the management of manpower, materials, and equipment to optimize productivity and efficiency.

Requirements

• Recognized Degree in Civil / Structural Engineering or equivalent. PE Board recognized degree is preferred.
• At least 6 years’ experience in building or civil engineering project for senior role.
• Minimum 2 complete cycle (piling to roof) for HDB projects.
• Experience in architectural works will be an advantage.
• Technical competence.
• Knowledge in BIM/VDC is an advantage.
• Positive attitude and good team player.
• Demonstrates a sense of urgency.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

• Perform end user IT Support
• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

Frontend Software Engineer (React.JS)

Location: Central

Working Arrangement: Hybrid

Remuneration Package: Up to $6,500 + AWS + Variable Bonus

About Us:

Join our innovative team as a Frontend Software Engineer and make an impact with your ReactJS expertise. We're looking for a creative and motivated individual to drive the development of engaging user interfaces and cutting-edge applications. In this role, you'll collaborate in a vibrant environment, shaping the future of our web applications while ensuring a seamless and enjoyable user experience.

What You'll Do:

• Transform Designs into Code: Convert design wireframes and visual mockups into high-quality, responsive code using HTML5, CSS3, and WebSocket.
• Develop and Maintain UI Components: Build, test, and maintain dynamic user interface components with a focus on performance and cross-device compatibility.
• Enhance UI/UX: Work closely with our design team to refine and enhance the user experience of our applications.
• Create Reusable Code: Develop modular and reusable front-end components and libraries to streamline future projects.
• API Integration: Connect with RESTful services to ensure smooth and efficient data exchange.
• Collaborate Across Teams: Partner with software engineers, business analysts, and architects to design and implement web-based solutions.
• Support and Maintenance: Deploy applications, provide ongoing support, and resolve any issues that arise during or after hours as needed.
• Optimize Systems: Improve the efficiency of applications, systems, and databases by understanding and enhancing their interdependencies.
• Continuous Improvement: Identify opportunities for process improvements and document your recommendations for team and stakeholder review.
• Ensure Quality: Follow best practices for high-quality development to deliver solutions on time and to specification.

What We're Looking For:

• Educational Background: Degree in Computer Science or a related field.
• Experience: Proven track record in developing web applications and workflows, with a solid grasp of modern JavaScript frameworks, especially ReactJS.
• Technical Skills: Proficiency in HTML5, CSS3, WebSocket, and RESTful APIs. Experience with Git for version control and knowledge of CSS pre-processors (SASS, SCSS, LESS) and bundlers (webpack).
• Collaboration: Ability to work effectively in a team setting, with strong communication and problem-solving skills.

If you're passionate about frontend development and eager to work in a collaborative and forward-thinking environment, we’d love to hear from you!

"By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

Contact you about potential opportunities.

Delete personal data not required at this application stage.

To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Aloysius Tan Sheng Rong - R22110441

ScienTec Consulting Pte Ltd - 11C5781

Production Engineer | HSE | Chemical Industry | Up to $6k | 5 Days | Jurong Island

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $6000
  

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Senior M&E Engineer

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm
Office The Adelphi (City Hall)
Salary: $5000 to $6000

Job Scope

• Generate M&E co-ordination shop drawings.
• Evaluate and resolve M&E problems with consultants and sub-contractors.
• Attend principal meetings with client and consultants.
• Prepare M&E progress report or any other reports required by the client or consultants.
• Collect operational manuals from suppliers / sub-contractors on completion of project for submission.
• Check and ensure compliance with the requirements of ISO 9000, ISO 14001 and OHSAS 18001.
• Collaborate with site engineer to resolve problem and co-chair meeting monthly.
• Propose risk assessments based on tender drawings and documents.
• Develop VCED, including cost-effective solutions for M&E.
• Review M&E work schedules and lead times to create suitable project schedules using Microsoft Project (equivalent) for tender projects.
• Assist in tendering work by proposing appropriate architectural and C&S solutions, including necessary plinths, access panels, structural openings, dog houses, make-good areas, and other related elements.
• Attend site surveys and ensure proper methods of statement and material shifting are in place.
• Review all VOs on-site and evaluate costs based on POs and tender clarifications.
• Collaborate with the Planning and QS Departments on related matters.
• Prepare Tender presentation slides and present M&E-related items to the client during interviews.
• Full M&E functions as designated and not limits to other general assigned duties.

Requirements

• At least 3 years relevant experience

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Salary: up to $6000

Duration: 3 months

Location: Tuas (Islandwide pickup)

Working Hours: Monday - Friday Office Hours

Job Scope:

• Support and execute data gathering and execution of validations, qualifications and stability studies to support the manager;

• Comply with Quality and HSE procedures when carrying out sampling and QC tests and release.

• Identify OOS, deviations and quality problems

• Review/Approve testing documentation and test records

• Maintain integrity, accuracy and completeness of QC data and records

• Report equipment OOS issues

• Ensure smooth operation of daily team activities

• Performs any other duties as assigned by Supervisor according to business needs

Requirement:

- Minimum Degree in engineering or related courses

- Experience of performing equipment qualification in GMP industry.

- Equipment qualification includes installation qualification (IQ), operational qualification (OQ), performance qualification (PQ).

- knowledge and experience of performing computerized system validation and well aware of US FDA’s 21 CFR Part 11 requirements for electronic record requirements.

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Position title : Vision Software Engineer

Location: Admiralty
Working Days: 5 Day A Week
Working hours : 9:00am - 6:00pm
Salary : $5000 - $8000 (depends experience)

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for
designing, developing, and maintaining software applications for vision systems.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.
• At least 3+ years of experience in software development with C#, WPF, Image Processing , Halcon (bonus)

• Undertake construction supervision as RE of underground building works and civil infrastructure, involving site inspection, meetings and review of drawings and method statements in accordance to customer specifications, applicable codes, standards and other generally accepted practices
• Carry out independent design checks for temporary formwork and formwork support system
• Keep quality records of all works, monitor and report on work progress
• Review and comment on contractor's submissions
• To review and supervise safety, environmental and health matters
• Station full-time on site to support Senior Resident Engineers (SRE) and the QP(S) with projects
• Requirements:
• Experience in Underground work/ viaduct work
• Minimum Diploma in Civil and/or Structural Engineering from an established institution and/or qualification accredited by JAC of IES/ACES as QSS
• Minimum 3 years of relevant experience as RE for LTA project (MRT, underground, tunnelling works) or PUB project
• Has good working knowledge of Geotechnical and instrumentation works and compliance to Singapore Building Regulations
• Good analytical ability with strong verbal and written communication skills
• Independent, organized with positive work attitude

Responsibilities:

Cloud Services Support:

• Provide advanced technical support for AWS and Azure environments, including troubleshooting cloud services, virtual machines, storage, networking, and security configurations.
• Analyze and resolve issues related to cloud performance, connectivity, and security.

Operating Systems Support:

• Troubleshoot and resolve issues on Linux and Windows servers, including performance tuning, system updates, and patch management.
• Manage and support system configurations and patching, ensuring compliance with best practices.

Active Directory and Related Services:

• Manage and troubleshoot Active Directory (AD) issues, including user account management, group policies, domain controllers, and authentication services.
• Support related directory services such as DNS, DHCP, and LDAP.

Incident Management:

• Respond to and resolve technical support tickets within defined SLAs.
• Escalate complex issues internally or vendor support as necessary.
• Document troubleshooting steps and solutions in the knowledge base.

Experience:

• Minimum of 2 years of experience in technical support or system administration.
• Proven experience with AWS and/or Azure cloud services.
• Strong knowledge of Linux and Windows operating systems.
• Experience managing and troubleshooting Active Directory and related services.

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.