Total 3,353 Senior Executive field engineer job vacancies in islandwide

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Responsibilities

• Provide highly visible customer support through the performance of on-site installation, as well as overseeing any necessary diagnoses, troubleshooting, service, and repair of complex equipment and systems
• Perform continual improvement programmes, parts' overhaul, preventive maintenance, modifications and repair works on equipment
• Serve as company liaison with customer on administrative and technical matters for assigned projects
• Coordinate logistics arrangements and with customer on equipment related matters.
• Respond to customers’ complaints, provides time to solutions to resolve customers’ issues
• Monitor the performance of the product, provide regular update report and feedback on customer’s service requests
• Report common complaints of customers to management in order to address the situation for future reference

Requirements

• Degree in Electrical/Electronic Engineering or its equivalent
• Preferably 3 years of relevant experience with Dry Etch Equipment knowledge
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Experienced working in cleanroom environment
• Require to work or be on standby during after office hours/weekend/public holiday

We regret that only shortlisted candidates will be notified.

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Represent the company as the technical person to internal & external customers and partners in the assigned geographical region

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

As a Non-Volatile Engineering Group (NVEG) Engineer / Senior Product Engineer in NAND Component Reliability team at Micron Technology, Inc., you will be part of NAND product development team responsible for developing and executing NAND component reliability test strategies for Micron's newest NAND products. You will be working with a group of Engineers to test and characterize Micron's latest NAND product in all Product Reliability aspects, defining reliability gaps and work with cross functional teams to drive for resolution and to achieve product qualification on time.

Additionally, you will be working closely with NAND product, Design, R&D, Fab and Quality teams and your success will be significantly contributing to Micron's strategic objective of maintaining Technology and Product leadership.

Key Responsibilities:

• Work with NAND Reliability Architecture /TD/Media architecture/System integration teams to define and develop reliability stress, test flows and test plans to cover all Product Reliability aspects.
• Responsible for NAND Component Reliability testing execution to meet the aggressive timeline by managing the project schedule and collaborating with Reliability Operation teams for test plan execution.
• Analyze large amounts of reliability data and present it to cross functional teams to assess reliability capacity, defining reliability gaps and drive for resolution and improvements.
• Debug and identify root cause and failures in reliability tests by electric failure analysis(EFA) and Physical Failure Analysis (PFA) and drive for resolution and improvements through cross functional team collaboration.
• Work closely with Global Quality team to define qualification plan, review the qualification execution progress and drive for qualification gating issue resolution.

Requirements:

• Degree in Electrical & Electronics Engineering or related disciplines.
• Good understanding of NAND device operation, Reliability testing and NAND-System integration.
• Good knowledge of semiconductor processing and device physics.
• Good knowledge of statistics and data analysis tools.
• Excellent Problem solving and Analytical skills.
• Effective communication and presentation skills.
• Self-motivated and enthusiastic.

Job Responsibilities :

- To develop and maintain business strategies by achieving sales target and increased market shares.

- Visits customer to drive sales pitch and product presentations

- Responsible for achieving sales revenue and profit target

- Align and link business strategies set by company

- Build strong relationship with existing and new customers

- Provide sales and after-sales support, in coordination with our internal departments and customers

- Prepare sales quotations for customer.

- Follow up with after sales issues.

- Market studies and feedback to sales manager

- Monitors sales quotation status and forecast.

- Performs order screening and preparation for clean order processing

- Ensures proper documentation of all sales quotations in line with the ISO standards and processes.

- Participate in any ad-hoc projects as assigned by management and or sales manager from time to time

Job Requirements :

- Diploma / Degree in Engineering

- 3 years of relevant experience

- Experience in Process Instrumentation / Automation Industry

- Experience with MRO Sales an added advantage

- Independent and Team player

- Excellent communication and interpersonal skills

Familiar with CRM and ERPLN

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Job Responsibilities:

• Planning and scheduling of projects.
• Manage and lead a team of supervisors, technicians and operation of assigned projects.
• Manage projects and to monitor the projects are carried out with respect to the target schedule.
• To handle design for projects and to ensure clients' requirements are met.
• To attend project meeting and to coordinate with clients, consultants, main contractors and sub contractors.
• Preparation of Progress Claim, Materials Submission, Risk Assessment, Progress Report, Shop Drawings & As Built Drawings for projects.
• To forecast and anticipate possible issue for projects and to eliminate potential risks.
• Site supervision and to liaise with supervisors and workers to ensure smooth work flow.
• Planning of manpower and work arrangement with site person in charge.
• To liaise with suppliers on procurement and delivery of materials and equipment.
• Assist in settlement of project final account including variation orders.

Job Responsibilities:

• Planning and scheduling of projects.
• Manage and lead a team of supervisors, technicians and operation of assigned projects.
• Manage projects and to monitor the projects are carried out with respect to the target schedule.
• To handle design for projects and to ensure clients' requirements are met.
• To attend project meeting and to coordinate with clients, consultants, main contractors and sub contractors.
• Preparation of Progress Claim, Materials Submission, Risk Assessment, Progress Report, Shop Drawings & As Built Drawings for projects.
• To forecast and anticipate possible issue for projects and to eliminate potential risks.
• Site supervision and to liaise with supervisors and workers to ensure smooth work flow.
• Planning of manpower and work arrangement with site person in charge.
• To liaise with suppliers on procurement and delivery of materials and equipment.
• Assist in settlement of project final account including variation orders.

Key Responsibilities:

• Schedule periodic Service and Maintenance (S&M) and ensure service reports for periodic S&M are properly documented and stored.
• Identify and troubleshoot any operational problems with any equipment.
• Prepare quotations, organise and carry out necessary repair work.
• Ensure contractual obligations are always met.
• Ensure chiller plant always maintains 'n+1' contingency.
• Monitor chiller plant performance (kW/RT) and work with the Performance unit to optimise and maintain chiller plant performance.
• Prepare and submit Service Reports for insurance claims.
• Schedule technicians' duty roster, and review and approve technicians' timesheets, leave, claims, etc.
• Be the main point of contact with Customers - provide technical/operational support to Customers when needed, attend to Customers' complaints, and prepare and submit incident reports to Customers.

To succeed in this role, you must have:

• Diploma in Engineering/Mechanical/Electrical, or related disciplines.
• Minimum of 5 years of relevant experience working with ACMV systems, preferably in a similar role.
• Well-versed in air-conditioning and chiller plant operation fundamentals.
• Possess good communication skills, able to manage stakeholders and work well in a team.
• Responsible and self-motivated.

Description

• Responsible for taking over the project from tender / sales team for execution
• Prepare PEPL’s Scope of work and create project schedule based on the scope - document submission list, material submission list, material lead time, installation and testing period
• Create Document submission & Material submission list and prepare submissions
• Design & review the drawings and documents for timely submission to customer
• Monitor submissions & follow up with customer for timely approval of the documents & material submissions
• Prepare Purchase Requisitions for purchase of necessary project materials on time and coordinate with purchase team and our subcontractor / supplier
• Plan the construction site manpower requirement together with Superintendent
• Coordinate with Superintendent / Construction Manager / Site supervisor for site work activities installation, testing & commissioning and progress report
• Maintain & update Project schedule regularly and prepare Weekly / Monthly Progress report for internal & customer
• Participate in regular customer meetings & proactively manage customer expectations by preparing necessary submissions / agenda / minutes of meeting etc.
• Manage the project cost within allocated budget
• Maintain Change Order Log and proactively manage change in scope. Prepare RFI / VOR and get VO from customer before executing the scope change.
• Prepare Progress Claims timely and follow up for approval and maintain Progress Claim Summary report
• Escalate challenges / issues to the Project Manager & management to resolve it on time
• Collaborate with Customer, Consultant, Owner, Third Parties, Suppliers & internal team members for successful project execution
• Organize & coordinate for Factory Acceptance Testing (FAT) of necessary equipment
• Perform pre-punch list walk thru with PM and Superintendent
• Clearing of punch list defects in collaboration with site team
• Prepare & provide training to customer for necessary equipment (as applicable)
• Responsible to collect all Handover & completion documents
• Manage & Comply with Workplace Safety & Health for project execution
• Organize necessary safety training for the project & site team members
• Comply with the PQP document for project execution

Requirement

• Diploma/Degree in Electrical Engineering or related studies
• More than 3 years of project management experience in related field
• Experienced in handling multiple projects
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Key Duties & Responsibilities:

• Policy, strategy alignment and coordination of project by collaborating with headquarter or other group company.
• To initiate periodical meeting with head quarter or other group company to solve problems in own division.
• Window person to mother factory/business division to facilitate effective communication/knowledge updating.
• Implement effective production rules.
• Implement world-wide effective horizontal deployment.
• Create feedback system to improve mass production stability.

Ability/Competency required:

• To hold bachelor’s degree or master degree in engineering or science field (or related to certificate that we shared).
• To have deep & specialized quality knowledge in our products and to be able to fully utilize it in actual job for improvement.
• To have logical thinking, analytical skill and good engineering sense.
• To have strong mind-set for change and improvement with cross-functional team.
• Excellent interpersonal communication skills, analytical skills, project management skills, and troubleshooting skills.
• To have networking ability with our product related functions
• Statistical analysis experience by using tools (JMP).

Murata Electronics Singapore is committed to providing a safe and secure environment for all job applicants.

Please note that Murata Electronics Singapore does not charge any fee for job applications or interviews. If you receive any suspicious emails or messages claiming to be from Murata Electronics Singapore, please do not respond and report it to us immediately.

Purpose:
To independently define the concepts, design, prepare and deliver fire protection system deliverables for the assigned project (may include Construction, Commissioning and Offshore assignment) effectively and efficiently according to the specified technical requirements, timelines and budget, and independently deal with and resolve all issues of the project.

Responsibilities

• Understands the project specific specifications and requirements of the assigned project (mayinclude Construction, Commissioning and Offshore assignment) and Industry Standard, Classification Society and Regulatory requirements.
• Develops design philosophies, engineering specifications, PFD and P&ID drawings (for fire water pump system, fire water network, deluge system, foam system and gaseous fire fighting system), Shadow drawings of firewater & foam System, Layout of fire protection system (such as hydrant, monitor, hose reel, deluge system or extinguisher and fire & gas devices), Passive fire protection( Fireproofing ) zone diagram, data sheets of fire fighting equipment, fire water demand calculations, hydraulic calculation and equipment sizing specific to the assigned project and validates them with the Lead Engineer.
• Independently evaluates the fire protection aspect of all the bids received for packages from various suppliers, involves in technical bid evaluation process to ensure that selected vendors meet technical/engineering requirements as stipulated in the project specifications and gives assessment in consultation with Lead Engineer to the Package Engineer.
• Independently prepares the technical reports (fire water demand calculation, fire water hydraulic calculation as per NFPA), line list, set point list and fire & gas system C&E for the assigned project.
• Independently develops solutions to technical/engineering and related problems by analyzing the issues/data, interpreting the analysis and evaluating various options/measures using experience, precedents and professional references.
• Participates in safety meetings, explains the fire protection system to the committee and closes the observations and recommendations in a timely manner.
• Participates in key stakeholder (Client / Supplier / Sub‐contractor / Class) meetings, reviews stakeholders’ documents and addresses interface/implementation/execution issues, and escalates where necessary to ensure that the project proceeds timely and smoothly.
• Provides technical/engineering support and advice to Construction/Commissioning work at site, trouble shoots and follows up to rectify the gaps or problems. Where necessary, provides off‐site support and advice.
• Is responsible for capturing lessons learned in his/her functional area, entering in lessons learned system, and closing out project related lessons learned actions.
• Guide Junior Engineers

Requirements:

• Bachelor or higher degree in chemical engineering or mechanical engineering. Alternatively, Diploma in Engineering with several years of relevant working experience.
• Minimum 7 years of relevant working experience in fire fighting engineering in oil and gas sector for graduates or at least 12 years of relevant working experience for diploma holders.
• For Master degree holder, minimum of 6 years relevant working experience.
• Experience in engineering company or EPC contractor is required
• Must be familiar with the applicable industry standards (NFPA, API) and Classification Society code (ABS, DNV), Company standards, specifications and procedures for his/her functional area.

R1552011

PeakOcean EA License No. 18C9336

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Responsibilities:

· Thinks Strategically – Ability to relate own area of work and align own actions with Seatrium's capabilities and strategic plans

· Drives Innovation - Ability to deal well with ambiguity, does not need a road map to move forward and is able to adapt to changing circumstances

· Leads Courageously - Ability to take initiative in non-hierarchical situations

· Learning Agility - Ability to continuously seek out new information by asking questions and be open to learning from others across different parts of the business

· Focus on Customer - Ability to understand how own services meet business requirements

· Drives Results - Ability to demonstrate enthusiasm in achieving results and consistently reaches outcomes on time, on budget and without errors

· Influences and Collaborates - Ability to understand others’ view and use rational arguments, information and clear communication to influence others

· Develops People - Ability to respond positively to feedback and coaching and have an active development plan

· Cultural Sensitivity - Ability to demonstrate a curious and positive approach to understanding other cultures and environments

· Conducts survey on project site and proposes construction methodology including subcontracting strategy, equipment/ manpower routing and logistical planning to prepare construction execution and expediting plan

· Prepares scheduling documents, procedures and method statement for construction related activities including setting up the construction planning documentation for tender and project execution stage

· Responsible to prepare construction manpower and equipment planning (i.e. direct and indirect manning) including cost and formulates resource estimation for construction management

· Develops and maintains detailed EPC/ EPCm preliminary stage schedules for EPCC projects for tender stage, incorporating several scenarios to finalize various aspects of EPCC sequencing and contracting plans

· Liaises with third-parties(i.e. design consultants, construction management consultants, contractors) to obtain the latest schedules in the appropriate programmed format for each phase (i.e. planning, design, bid/award, construction, start-up)

· Develops creative reporting tools (i.e. Gantt charts, activity network diagrams and etc.) to communicate complex project sequencing and/ or progress assessments

· Conducts constructability study/ workshop for heavy and critical equipment transportation/erection/installation with tender project team members, commercial, procurement and etc. at the appraisal and proposal stage

· Performs project performance analysis including earned value through the analysis of man-hour resources including productivity of third parties, equipment resources and cost loaded to monitor construction expenses/cost against planning

· Leads project meetings with project team members and relevant stakeholders subcontractors to review on the project completion status against an established baseline

· Reviews construction requisition prepared by engineering discipline and troubleshoots bottle neck between construction and engineering project team members in order to achieve target schedule

· Maintains simplified logic schedules, implementing critical float path analysis to determine problem areas and alert the project team to critical scheduling issues

· Coordinates and validates schedules with cross functional team members and third party schedulers to update any changes to the master schedule to provide accurate reporting to the relevant stakeholders

· Provides progress reporting, developing/updating progress curves, documents and briefing materials as required to assess progress and measurement and promptly reports on schedule slippage/ variances

· Works with other project management team members as required to achieve functional objectives and deadlines

· Provides support in various projects as required to promote cross-functional learning and development, balance team workload and enhance overall team productivity

Requirements:

· Candidate must possess at least a Bachelor’s degree in Marine/ Engineering/ Electrical/ Mechanical, or related disciplines

· At least 3 to 5 years of working experience in construction planning in marine/ offshore related industry

· Experience with design-build and construction management at risk delivery methods

· Excellent proficiency in English (written and spoken)

· Advanced user of Microsoft Office products and project management software programs (i.e. Microsoft Office Suite, Primavera Project Planner Version 6.0 or higher and etc)

· Good working knowledge of all phases of construction including work commonly done by the various construction disciplines

· Good knowledge and experience scheduling the design and construction of large-scale, complex projects

· Good knowledge and experience in developing and managing a progress reporting methodology for a complicated design effort

· Ability to understand a demanding, technical and complicated construction program

· Good knowledge of construction trades, work breakdown structure and the logical sequence of activities to optimize project schedule

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

(All Yards)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Workplace: Ang Mo Kio

Job Description:

• Manage the QA and QC activities of assigned projects to ensure systems meets the customer quality requirements
• Plan, conduct and monitor testing and inspection of Projects work products to ensure finished product quality
• Conduct internal Quality Audits
• Collect and compile statistical quality data
• Prepare reports to communicate outcomes of quality activities
• Coordinate and support on-site audits conducted by external providers
• Develop, monitor and recommend preventive actions
• Investigate customer complaints and issues
• Assist in drafting QA policies and procedures
• Interpret and implement quality assurance standards and procedures
• Analyze data to identify areas for improvement

Requirements:

• Quality inspection, auditing and testing experience
• Experience in software/system/product development lifecycle
• Knowledge of tools, concepts and methodologies of Quality Assurance
• Knowledge of relevant regulatory requirements like ISO 9001, ISO 27001 would be advantageous

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

• Conceptualisation and design of facades, preparation of drawings and structural calculations
• Delivery of technical presentations
• Coordination with clients, architects, consultants, façade contractors, suppliers and other project team members
• Supervision of construction, site inspection and training of constructors
• Preparation of technical submissions, proposals and documentation

We are looking for a skilled Software Engineer (Full Stack Developer) to join our dynamic consulting team. In this role, you will play a key part in designing and building scalable, high-performance applications, while working closely with clients to understand their unique needs and deliver tailored solutions. This position requires a solid foundation in both backend and frontend development, with a primary focus on Python and React.js. You will be involved in all phases of the development lifecycle, providing technical leadership, and ensuring successful project delivery through close collaboration with clients.

Key Responsibilities:

· Lead client interactions, including requirement gathering, technical discussions, and workshops to clearly define project goals and scope.

· Design, develop, and maintain full-stack applications development (i.e. Python, React.js etc.)

· Build secure, scalable APIs and integrate third-party services, databases, and systems.

· Develop user-friendly interfaces optimized for performance across various platforms.

· Provide technical guidance throughout the project lifecycle, from initial concept to deployment and documentation.

· Explore and gain hands-on experience with emerging technologies such as Large Language Models (LLM) and Retrieval-Augmented Generation (RAG).

· Collaborate with cross-functional teams to deliver high-quality projects within agreed timelines, ensuring optimal performance and security.

· Stay updated with the latest industry trends and technologies to drive innovation in client projects.

Requirements:

· Passion for Emerging Technologies: A strong interest in staying ahead of the curve with new technologies like Large Language Models (LLM) and Retrieval-Augmented Generation (RAG), with a desire to continuously learn and integrate these into client solutions.

· Leadership and Ownership: Proven experience leading technical projects, guiding the development lifecycle from requirements gathering to deployment, while ensuring quality and client satisfaction.

· Full-Stack Expertise: Minimum of 7 years of full-stack development experience with a strong focus on Python for backend development and React.js for frontend development.

· Infrastructure and Cloud Knowledge: Solid understanding of infrastructure, cloud platforms (Azure, AWS, GCP, Alibaba Cloud), and familiarity with network and security best practices.

· API Development: Expertise in building and integrating RESTful APIs and working with database systems (SQL, NoSQL).

· Consulting Experience: Ability to engage with clients through requirement gathering, leading workshops, and providing technical solutions that align with their business needs.

· Agile and Version Control Skills: Familiarity with agile methodologies and version control systems like Git, ensuring smooth collaboration and project efficiency.

· Problem Solving & Communication: Strong problem-solving skills with the ability to communicate complex technical information effectively to both technical teams and non-technical clients.

· Client-Focused Approach: Ability to understand client needs and translate them into scalable, high-performance applications that deliver value and enhance user experience.

Overall Job Objectives

This role is to support global business processes across sales, factories and business unit organizations.

We are looking for a resourceful candidate with a strong analytical capability, and able to utilize various systems for data evaluation. This position is based at our Regional Singapore office.

Core Responsibilities

• Build up cost models to provide package cost estimates and manufacturing readiness inputs to business unit, engineering and factory
• Support critical meetings with internal cross functional teams on product / package costing
• Develop relationships with factory, sales and business units to ensure alignment with industry and customer trends
• Responsible for production pricing maintenance duties, including approving pricing issues in SAP
• Assist global sales take-or-pay coordination and reconciliation
• Adhoc analysis of various revenue related items

Job Specifications

• BS degree in Engineering.
• Minimum 3 years of relevant experience in semiconductor industry.
• Direct experience and/or strong familiarity with semiconductor Substrate, wirebond or FlipChip opportunities is a plus.
• Demonstrated understanding of manufacturing processes and raw materials.
• Advanced Excel usage and large data set manipulations.
• Strategic thinker with a proven ability to translate technical requirements/issues into the business context or vice versa.
• Able to work independently and to multi-task, excellent communication and presentation skills and working across functional groups as well as cross-culturally.

Interested applicants, please kindly email your update resume to [email protected]. We regret to inform that only shortlisted candidates will be notified.

Job Scope:

• Project planning, coordination, and execution.

• Design and integration of automation systems according to project requirements.

• Graphical design of the electrical network.

• Plan installation schedule with client and installer

• Testing and commissioning of systems.

• Preparation of project documents and drawings.

• Manage a group of Application Engineers in the functional aspect.

Requirement:

The candidate is preferable with at least a Degree in the Engineering field (Electrical or Power & Automation, experienced candidates are welcome.)

• Experience/knowledge in SCADA, PLC & HMI in Power System Control or Environmental Control Systems is an added advantage.

• Knowledge of data communication and automation systems for electrical networks.

• Knowledge and experience in IT networking as well as server/VM setup.

• Knowledge in Power Quality area is a plus

• Knowledge in HVAC system is a plus

• Required skill(s): Microsoft Office, Savvy in various computer skills such as computer networking, setting up new PC/VMs, and knowledge of electrical systems.

• Mature and able to handle tasks independently, result-oriented, and self-driven team player with good communication skills.

• Good personality, responsible, hardworking person.

• Fast learner and good soft skills.

• Ability to work as a team, lead and supervise the contractors.

• minimum 5 years of experience.

• Experience in team management in functional aspects.

• Process excellent team spirit and good leadership.

Additional remark:-

- Candidate with more years of technical and/or team management experience will be considered for Team Lead or Manager position/package.

Responsibilities:

• Oversee distribution management for direct users and distributors.
• Drive revenue growth in the assigned territories.
• Achieve sales targets and develop plans to implement strategic business objectives aligned with the group's vision and mission.
• Proactively create new applications and communicate them to distributors.
• Collaborate with the Regional Team to provide monthly and quarterly updates on sales forecasts, budgets, sales generation, business development, and related reports.
• Utilize Salesforce as a forecasting tool to ensure accurate and well-maintained records of prospects and clients, while building a strong pipeline of opportunities.
• Support, quote, and negotiate prices, credit terms, contract agreements, and other specifications as needed.

Requirements:

• With 3 years of experience in industrial product selling.
• Exceptional customer service and presentation skills.
• Positive, dynamic and results-oriented

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R23117856

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities :

• Support the technical team and construction team for all design matters.
• Review all technical documentation and drawings of the Project works.
• Work closely with consultant on the scope of services, design and project deliverables to enhance site efficiency and constructability.
• Manage design approval process and coordination with the clients, consultants and subcontractors in a timely manner to resolve all technical issues.
• Ensure strict compliance of the design in accordance with contractual requirements.
• Identifies and highlight to management and project team of any potential risks or issues that will impact project performance.
• Support tender team and prepare technical tender documents as per specifications for bidding of civil and structural engineering projects as when assigned.

Requirements :

• PE Board Recognised Degree in Civil Engineering
• Minimum 5 years of design management experience with at least 1 year of design experience in consultant firm.
• Strong coordination and collaboration with other disciplines.
• Good interpersonal and communication skills .
• Good organization and time management skills.

Job Description

● Develop/Support validation activities such as qualification test protocol or documentation

updates.

● Provide Technical expertise with respect to Emerson DeltaV or Rockwell Automation PLC/HMI system and software and in particular configuration in the company.

● Support software/hardware modification pertaining to the site Automation systems.

● Perform any modification/changes in terms of Hardware/Software in accordance with site GMP quality requirement.

● Support field troubleshooting with other internal Stakeholders.

● Interact with other departmental stakeholders like Quality, Engineering, Manufacturing as well as other staff within MSAT department on automation related enquiries.

● Support testing Factory Acceptance Tests (FAT), Commissioning and Qualification in accordance with site GMP quality requirement.

● Support other technical changes and duties such as On Call/Shift duty as required.

● Support Modbus/Devicenet/Profibus/Fieldbus and other types of devices communication protocol/devices in terms of troubleshooting/modification/addition. Support Variable

Frequency (VFD) commissioning/modification and validation.

Requirements:

● Knowledge/Proficient in Emerson DeltaV System and software OR Rockwell HMI System, software and PLC/HMI/VFD/Devicenet is a must.

● Knowledge of site GMP quality requirement will be a plus.

● Knowledge of Computer System Validation will be a plus.

● Pharmaceutical related experience preferred.

● Minimum 3 years’ experience in relevant technical experience or as per project requirement.

● Must be team player, self-starter, curious with strong analytical and organizational skills.

Duration : 2 years. Option to extend/convert subject to performance review.

Responsibilities:

• Assist the Project Manager in the planning, design and day to day running of geotechnical engineering projects
• Preparation of design calculations and technical drawings for the projects
• Determine operation requirements and to assist Project Manager in preparing schedule
• Liaise with sub-contractor and consultants for the execution of works
• Ensure timely delivery of projects in accordance to schedule
• Updating of project records for reporting purposes and submission of reports
• Attend site meetings and resolve technical/operational issues independently\
• Undertake ad-hoc duties assigned by Project Manager relating to project execution

Requirements:

• Candidate must possess at least a Diploma/Bachelor’s Degree in Civil Engineering or its equivalent
• Minimum 2 years of handling bored piling works experience
• Able to work in a fast-paced work environment and have a passion in foundation/geotechnical engineering works

Join our EET team in the Asia Pacific region to design, implement, and maintain remote access platforms, including VMware/Omnissa Horizon Suite, Citrix applications, and secure access services like F5/APM and Omnissa UAG. Collaborate globally to ensure platform sustainability, scalability, and optimal performance.

Job Responsibilities:

• Design, optimize, and maintain VMware/Omnissa Horizon and Citrix platforms.
• Manage secure remote access solutions (F5/APM, Omnissa UAG).
• Collaborate with global teams to resolve issues and drive innovation.
• Document system configurations and ensure compliance with standards.

Job Requirements:

• Bachelor’s degree in computer science or equivalent.
• 5+ years in VMware/Omnissa Horizon Suite (AppVolumes, UAG), Citrix DDC, and Windows 10/11.
• Strong knowledge of remote access technologies and protocols.
• Proficient in troubleshooting and problem-solving.
• Experience with F5/APM, AVI load balancers, iGel Thin Client OS, ChromeOS, and PING/SAML authentication.
• Familiarity with secure remote access architecture.
• Excellent communication and collaboration skills.

Next Step

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package
• Send your resume to [email protected]
• All shortlisted candidates will be contacted

EA Licence Number: 91C2918
Personnel Registration Number: R23114076