Total 8,499 field engineer job vacancies in Singapore

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed at least 1 project (data centre, commercial bldg., industrial)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

Process Engineer (Biologics) - Job Scope

The successful candidate will apply process engineering knowledge to support new product/process introduction and/or commercial protein biologics processes. Scope of work would include:

Data Analysis:

• Compile and analyze process data using tools such as Excel and Minitab.
• Verify data in technical reports and spreadsheets.

Process Optimization:

• Consolidate and compare cell culture and purification process manufacturing practices for the purpose of facility fit and identification of areas for optimization and alignment across manufacturing sites.

Cross-functional Collaboration:

• Participate in teams and collaborate cross-functionally with representatives from other functions and sites to support drug substance manufacturing process alignment.

Meetings and Presentations:

• Organize and conduct meetings, actively creating, generating, and presenting data/conclusions at internal and cross-functional meetings.

Technical Documentation:

• Support authoring of technical protocols and reports.

Lab Support:

• Support small-scale cell culture or purification studies while ensuring safe operation of process development (PD) activities in the laboratory.

Qualifications

• Educational Background:Degree in Chemical Engineering, Bioprocess Engineering, or Biochemistry.
  
• Skills:Possess a basic understanding of biologics and chemical engineering principles.
  Demonstrates independent motivation but also works well in a team environment.
  Exhibits excellent written and verbal communication skills.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Maintain and enhance IT applicationemig new enforcements to the applications, troubleshoot five us to klerdily causes of the problerres and providing workable solution to fix thes

Design and develop IT in according to specificatiores provided.

Perform Berative prototyping te introduce and enhance new features to the cors system.

Perform design, programming Integration, system testing, mint users in Uber Acceptance Test (UAT), documentation

Generate unit tests and end-to-end test scripts to ensure nothing breaks upon deploying new features and maintain current automated scripts in Jenkins.

Troubleshoot, identify, solve issues and develop automated test cases to prevent similar issues

See through all enhancements and fixes to ensure they are property deployed to the testing and live environment within the agreed time. That includes working with the end users, server administrators, database administrators and the system analysts supporting the IT systema.

Experience and skills requirements

Degree in Computer Science, Information Systems, Information/Infocomm Technology.

Computer or Electronics Engineering or related discipline.

Must have minimurn 3 yours of working experience in this role and good experience in the following skills/technologies:

Web Application Client-side Technologies (eg. JavaScript/Typescript ESS/E ReactJS, React Hooks, Redux, jQuery, HTMLSICSS, AJAX/JSON, NPM)

Web Application Server-side Technologies (eg. Asp.NET Core, Asp NET MVC.

Web GIS Technologies (eg. ArcGIS JavaScript API, ArcGIS Server REST API, GeoServer, PostGIS);

Database technologies (eg. Postgresql, MS SQL, Oracle); and

Code version control system (Ga).

Other requirements

Must have good communication skills and the ability to

Understand and communicate in English, in speech and writing.

Work with other members in a dynamic and fast-moving team

Work independently with minimum supervision

Work on own initiative and adhere to deadlines.

Added advantage with the following

Development using Microsoft Azure Cloud and/or AIVS Cloud

Open-source technologies such as NodeJS, Leaflet, GeoServer, PostgresSQL, PostGIS

Knowledge of geospatial and mapping concepts such as spatial analysis and map projections with ESRI technologies.

Experience with geoprocessing using Python scripts and ETL tools such as FIME

Experience in agile development and DevOps processes.

To coordinate between Application and Infrastructure Teams to implement the Infra Requirements for Applications

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• Ensure Operating system, Middleware, Database performance ,Security /Bug fix patches , EOS and security (ISCD) compliance in accordance to the bank standards
• Provides hands on technical expertise (SME) , senior level technical guidance to application team as necessary
• Assist and respond promptly to incident, investigate and provide temporary/permanent resolution to incidents escalated with respect to Middleware/ Operating system/ database performance, capacity, resiliency , stability, replication and other key aspects
• Researching and recommending solution that best meet business needs and enterprise operational requirements
• Provide technical support to application development teams
• Evaluate release of Middleware, Operating system, Database components and its tools to ensure entire environment is complaint with no/minimal impact

Qualifications

• Knowledge in Kubernetes, Docker, Jenkins, DevOps, Other Container platforms
• Knowledge in Linux OS, Wintel OS, MariaDB or Any Other databases
• Knowledge in Networking (F5 GTM/LTM or any other SLB)
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Experience in banking or financial services institutions preferred
• Will need to work in shifts and in weekends
• Team player to work with multiple teams and teammates

Kindly take note of the following details for shift work

Transport is claimable - before 7am (for morning shift 6am to 3pm) , after 11pm (afternoon shift 2pm to 11pm)

Shift Timing

a. Morning shift 6am to 3pm

b. General shift 9am to 6pm.

c. Afternoon shift 2pm to 11pm

d. Night shift 10pm to 7am.

Need to support including night shift, weekends and public holidays

• Assistant the Project Manager in overseeing the project, planning and ensure work is carry out according to master program
• Liaise with the consultant on technical issue and doing coordination on site issues with sub con
• Work with project team and ability to resolve technical issues
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.
• Experience in building projects.

Job description:

• Coordinating with all related stakeholders
• Coordinating & supervising works & site activities based on systems & engineering design
• Making sure Mechanical & Electrical job is done based on micro-schedule and master programme
• Ensuring Mechanical & Electrical job complied to specifications, drawings, & authority codes
• Diploma in mechanical engineering or above
• Mechanical & Electrical Engineer experience in construction industry
• Familiar with AutoCAD & Microsoft office

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Responsibilities

· Creating and maintaining database standards and policies.

· Supporting database design, creation, and testing activities

· Managing the database availability and performance, including incident and problem management.

· Administering database objects to achieve optimum utilization.

· Defining and implementing event triggers that will alert on potential database performance or integrity issues.

· Performing database housekeeping, such as tuning, indexing, etc.

· Monitoring usage, transaction volumes, response times, concurrency levels, etc.

· Implementing security measures and frameworks, while ensuring compliance. Identifying, reporting, and managing database security issues, audit trails, and forensics.

· Designing database backup, archiving, and storage strategy.

· Installing upgrades and patches for Graph (Neo4j) or SngleStore

Requirements
•Experience driving major production incidents and organise incident retrospective meetings
•Experience with Unix System, MariaDB or MySQL or SingleStore or MongoDB or Oracle
•Experience with high availability, high-scale, and performant systems
•Experience with python and Unix scripting

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Description

• Industry/ Organization Type: Manufacture of Electrical Equipment
• Position Title: Project Engineer
• Working Location: Nearest MRT – Woodlands North/Admiralty
• Working Hours: Monday – Friday, 8.30am – 6pm
• Salary Package: Up to $4,000 + VB
• Duration: Permanent

Key Responsibilities

• Attend meetings with clients and conduct site surveys to ensure all specifications and site conditions are accurately understood.
• Compile and update project progress reports, status updates, delivery schedules, and activities weekly, communicating these updates effectively to the Project Director and Project Controller.
• Respond promptly to both internal and external emails to maintain clear and effective communication.
• Maintain rigorous documentation of all project stages and ensure all designs submitted comply with client specifications and requirements.
• Continuously nurture and develop relationships with clients to ensure long-term cooperation and satisfaction.

APPLY NOW!!!

• Diploma in Electrical Engineering or an equivalent qualification with at least 1 year of experience
• Proficiency in AutoCAD and Microsoft Project is desirable
• Inexperienced candidates are welcome to apply as training will be provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70250 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Mandatory Skills Checkpoint Firewall

Preferred Skills Network - Routing and Switching, Firewall Administration and Operation

Brief Job Description

• Provide technical support, propose solutions, and project related queries for all Wired, Wireless network.

• Perform analysis, Plan, Coordinate and Implement all change requests on existing network equipment.

• Maintain records of system details (e.g. configuration, changes, problems, disaster recovery document) for network equipment.

• Manage firewalls like Checkpoint, Cisco FTD, Palo Alto and NEXUS switches; F5 Load balancer

- Gather business and/or application requirements on the infrastructure to plan, design, install, test & implement systems in accordance with the specifications & service level.

- Aligned or enhanced ITSM/ITIL methodologies in daily operations e.g. Change, Incident, problem, release management & CMDB.

- Monitor & measure the performance & availability of systems proactively; implement corrective actions identified to improve performance & service level availability.

- Respond promptly to incident, root cause analysis & provide temporary and/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.

- Implement service continuity measures, i.e., backup/restore procedures & disaster recovery plan, to ensure continuous operation of the business.

- Create and maintain comprehensive documentation for all implemented networks.

- Assist in preparation of proposals and solution presentations.

We are the makers of possible
BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.
Why Join Us?
A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.
To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.
Become a maker of possible with us!

Job Summary

The Injection Molding Process Engineer is a "hands-on" position that plans, directs, and coordinates manufacturing equipment and processes to produce high quality injection molded product. The Process Engineer is responsible for coordinating the molding efforts on new program launches, setting up and/or revising manufacturing processes and assisting the manufacturing operations in problem solving and continuous process improvements. While monitoring the effectiveness of processes this individual quantifies results, documents and presents findings to management and prepares reports.
This position also mentors and provides training to other injection molding personnel.

Job Description

1. Oversee molding production operations to meet requirements of Safety, Quality, Delivery, Cost and People (SQDCP).
2. Develop a robust Molding process by applying Scientific / Decoupled Molding techniques along with Design of Experiments (DOEs).
3. Implement and evaluate changes to existing processes designed to improve product quality, productivity and overall equipment efficiency (OEE).
4. Develop and maintain process documentation ensuring that processes and procedures are clearly stated and understandable for all employees. use Lean Manufacturing, Six Sigma, and other techniques to analyze process data to determine capabilities as well as improvement on OEE
5. Implement technical solutions including statistical methodology in continuous improvement to meet customer cost, quality, and delivery expectations.
6. Demonstrated ability to start-up, operate and shut down process related equipment. Must be able to work independently on new process development as well as troubleshooting current production issues and program robots and peripheral equipment
7. Work with equipment and material vendors to resolve machine and material issues.
8. Monitor and report issues with injection molds, make recommendations for refurbishment based on production factors such as cycles, process capability and tooling history.
9. Interact with customers to resolve issues and provide new project updates.
10. Facilitate and support facility and manufacturing safety, environmental, and ergonomics efforts.
11. Provide technical leadership and mentorship to process technicians, operators and other molding personnel.
12. Perform any other tasks as assigned.

Click on apply if this sounds like you!

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

To learn more about BD visit: https://bd.com/careers

Primary Work Location

SGP Tuas - Tuas Plant

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• BMS (Building Management System) // ACMV // Control Valve
• Mechanical Engineering - Training Provided

Job Responsibilities:

Liaison with Subcontractors:

• Coordinate with subcontractors for project updates and service execution, ensuring alignment with technical specifications.
• Monitor subcontractor performance to uphold quality and safety standards.

Client Interaction:

• Serve as the primary contact for clients regarding service inquiries and project progress.
• Attend client meetings to discuss project requirements, timelines, and address any concerns.

Project Management:

• Track and manage service projects, ensuring timely delivery and adherence to client specifications.
• Assist in preparing and submitting project documentation, including service reports and compliance materials.

Coordination of Meetings:

• Organize and participate in internal and external meetings to discuss project status and resolve issues.
• Prepare agendas and meeting notes, ensuring effective communication among stakeholders.

Documentation and Reporting:

• Maintain accurate records of project activities, subcontractor communications, and client interactions.
• Generate regular progress reports for management and stakeholders.

Continuous Improvement:

• Identify opportunities for process improvements in service delivery and communication.
• Collaborate with team members to implement best practices, enhancing operational efficiency and customer satisfaction.

Requirements:

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• Training will be provided for candidate without or with lesser experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

This role is within Package and Development Engineering (PDE) group of Micron. This is a global department with teams located in USA, Singapore, Malaysia, Taiwan, and India. As a PDPE (Package Device Product Engineer) in PDE, you will be responsible to prepare for new DRAM, NAND or MNAND products and coordinate resources, testing, and analysis over the lifecycle of the product. You will run data analysis and modelling, create, and maintain root cause analysis documentation, analyze parametric, probe level (Front End) and electrical test (Back End) data and respond to failures. In this role, you will work with various Technology Development (TD) & New Product Introduction (NPI) Engineering (Electrical Failure Analysis (EFA), Physical Failure Analysis (PFA), Assembly) and Manufacturing groups to find the root causes of the failed units.

Responsibilities and Tasks

• Enable new test signals in BE which would capture assembly related failures.
• Work with Test Solution Engineering (TSE) & Product Engineering (PE) to ensure standardize test coverages & chars. Define Char limits, and approval of any test related changes.
• Development of new out-of-control-action-plan (OCAP) and its sustenance
• Provide Lot disposition based on parametric data observation in case of out-of-control (OOC) trigger.
• Ensure that Silicon & assembly process meets Product expectations by extracting and analyzing Probe and BE test data.
• Participate in Phase Gate review meetings, presenting the data analysis and deciding on Phase Gate exits related to electrical Test data.
• Analyze test failures, coordinating EFA & PFA to identify the root cause. Implement fixes for fails (Fab process or Design or Assembly Process)
• Finding out the correlation of test failures to assembly process and updating the database with the signatures observed
• Support Global and Local material review board (MRB) in case of excursions and RMA related to package intrinsic design. This includes analyzing electrical test data for root cause analysis (RCA) and assessing the health of the contained material.

Requirements

• Bachelors/ Masters in Electronics, Device Physics, Applied Physics, Electrical
• Sound knowledge of device physics
• Knowledge in Engineering Statistics
• Experience in data (electrical) analysis and modelling (JMP, Spotfire is a plus)
• Experience in programming (Python or Perl)
• Effective communication skills in written and spoken English
• Good multitasking and organizational skills, able to make decisions in complex situations
• Excellent problem solving and analytical skills
• Experience in NAND / DRAM memory or related field
• Knowledge in semiconductor packaging assembly processes
• Experience in fabrication processes, electrical characterization techniques, metrology techniques

Job Objectives

• Within the framework of the Customer Services policy, the jobholder represents Airbus on site at the airline facility or in a HUB. He/She provides remotely or on-site technical assistance, having contact with Engineering, Maintenance, Flight Operations, Training and Spares, ensuring communication between the airline and Airbus, in order to satisfy the Airbus Customer Services obligations towards the airline and support future sales.
• If the job holder is the only representative in the airline or station, then he will manage the station.
• Activities can be performed in either a permanent station environment, within an EIS team or a multi AIB station. In certain circumstances the SFSR may be nominated as a CSC (Customer Support Contact) in case of no CSD being allocated and as agreed with SCY FSD.

Job Responsibilities

• If the jobholder is not alone in Station, he/she will support the FSM in daily activities, ensure proper reporting to Airbus via FSM. If the jobholder is alone in the station, on top of daily activities, he/she is to ensure proper direct reporting to Airbus.
• Provide technical advice and transfer know-how to Line Maintenance department at Entry In to Service of a new A/C type within a customer. This may involve matching working hours to Flight schedule for a limited period of time (weeks or months according to the A/C maturity).
• Interface and communicate with all departments at Airbus and the airline taking into account the changing organizations.
• Solve aircraft technical problems whilst under high pressure from the airline during aircraft on ground (AOG) situations to mitigate airline involves financial exposure.
• Demonstrate reactivity in front of Customer queries including timely facilitation of tech request.
• Influence airlines to embody OEB (in particular RED OEB) in order to enhance fleet safety.
• Be able to provide assistance on a wide variety of issues, not limited to technical.
• Provide swift and pragmatic solutions to technical related matters on the aircraft in order to limit issues becoming emotionally charged
• Be proactive in supporting the airline technical operation, including Flight Operations, Training and Spares.
• Act as communication and cultural facilitator within the Airbus FS team
• Maintain a business relationship with the airline and the home base.
• Adapt to specific airlines, cultural and climatic environments

Secondary Responsibilities

• In conjunction with the SSD for Chargeable Support (Customer Service Agreements and Purchase Agreements), coordination of sold services follow-up via Upgrade Programme Managers, FHS Customer Programme Directors, Training Key Account Managers, NavBlue Product Managers, Digital Product Managers and Satair Sales Support Directors etc.
• Provide first line issue resolution and de-escalation
• Manage Support and Service Escalations & Claims
• Consolidate and Coordinate an Airline Visit Schedule
• Coordinate and Administer ERM (SMM) / FRM (TRM) Events
• Support regional SEE technical forums

Job Requirements

• Hold professional qualifications in aerospace engineering
• Have at least eight-years’ experience in the aviation industry
• Have at least-five year’s hands-on experience in working in an MRO/OEM/Airline
• Possess knowledge and awareness of contracting principles
• Have a strong level of aviation safety awareness
• Having a class 3 driving license will be an advantage
• Will need to have B1/B2 on A350, A380, A330Neo
• Have demonstrated high-level written and oral communication skills
• Possess strong negotiation skills
• Be able to develop a business strategy supported by a robust business plan or other strategic imperatives
• Have demonstrated ability to work in multi-functional teams
• Be able to work autonomously and take initiative
• Possess an excellent track record of customer interfacing experience

Your Role
We are looking for an experienced Sales Engineer (Laboratory/ Electronic Testing) / Sales Executive (Cleaning Equipemts) to develop & identify business opportunities including sales visits, preparation of proposals, products & proposals presentation, contracts negotiation and closing of sales.

What Will You Do

• To develop and identify business opportunities
• To do sales visits, preparation of proposals & closing of sales
• To develop sales strategies for the growth of existing and new accounts
• To market wide range of products and provide customers with solutions
• To meet sales quota set and participate in yearly and periodic budget exercises.

What Do We Want

• At least Diploma/ Degree in Electronic/ Telecommunication / Engineering in relevant fields
• Min 1-2 years of relevant work experience in electronic testing / laboratory fields
• And have electrical control circuits, hydraulic system, electrical diagram working experinces
• Possess own transport will be advantage.
• Willing to travel.

What Will You Get In Return
You will be given exposure to a hold a key position in a growing organization with attractive rewards and a wide range of benefits. You will entitle a Gross salary up to S$3500 + attractive perks.

What You Need to do Now
Click "Apply" and please include the following information in your resume:

• Personal Particulars with recent photograph
• Education background
• Work experiences in point forms
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

Note:
Only shortlisted candidate will be notified via email for an interview invitation

Mechanical Engineer

Salary: $4500 - $5500

Working Hours: Mon to Fri (8 am to 4.30pm)

Working Location: Jurong Island (Company transport provided near Jurong East MRT)

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of:
• (a) daily maintenance [preventive, corrective, & breakdown maintenance],
• (b) transition maintenance,
• (c) turnaround maintenance and
• (d) upgrading and improvement related to maintenance
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Salary: Up to $8000

Duration: 6 months (start immediately)

Location: Kranji

Working Hours: Mondays to Fridays, office hours

Responsibilities:

• Ensures that the system in its totality (hardware, controls, sequence of operation) are fit-for-purpose and aligned with the business needs

• Support/Lead for the timing and strategy of process improvements and change controls

• Lead Quality Event (Deviation) process for Process Engineering and ensure timely creation, analysis and closure of events.

• Lead Change Control for Process Engineering and ensure timely creation, implementation and closure

• Responsible for Functional Specification Management.

• Provide support for weekly Plant Change Management meeting.

• Participate as Process Engineering representative on cross functional support team meetings.

• Primary liaison for engineering for RCAs and investigations (pulls in Process System & automation engineering as appropriate)

• Responsible for process safety assessments and hazard identification.

• Primary liaison for engineering for process FMEAs. Defines equipment operating ranges and ensures is aligned with process / product need

• Liaise with global engineering function to provide feedback on proposed and existing engineering standards and implement these as appropriate within the facility

• Target Delivery of results right first time

• Trouble shoots and resolves technical equipment problems and takes corrective action

• Timely closure of EHS and Quality event investigation and corrective & preventive action tasks.

• Lead CAPEX Project for Process Engineering and ensure timely implementation and closure

• Provide support for project teams for any new projects, makes recommendations based on experience

• Provide support for the evaluation and assist in the implementation of new technology for process execution and/or analysis

• Completes all required documentation for proper traceability complying with Takeda requirements

• Provide training to the end user on relevant technical aspects of installed plant assets

• Responsibility to adhere to any applicable EHS requirements.

• Commitment to a fair and respectful relationship to others and behavior in accordance with Company’s Code of Conduct.

• Any other duties as assigned by supervisor.

Requirements:

• Minimum Degree in Chemical/Bio/Process/Mechanical engineering discipline

• Minimum 4 years of process engineering experience in Biologics, Pharmaceuticals and/or similar manufacturing industries

• Experience in bio-processing engineering in a manufacturing environment is highly desirable

• Knowledge of unit operations associated with cell culture and downstream processing including: media and buffer preparation, bioreactors, depth filtration, sterile filtration, single-use technologies and chromatography skids & columns

• Experience in the design and operation of biopharmaceutical manufacturing equipment and facilities.

• Detailed knowledge of ASME Bioprocessing Equipment (BPE) guidelines

• Experience in a GMP environment is preferred

• Management experience within a multi-disciplinary team is an added advantage

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

• Well Established Company
• Basic $5500 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 3 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Summary:

• Basic up to 6k +
• Yearly performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in Solidworks
• Familiar with CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in Solidworks & CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job description:

Customer support:

• To arrange service visiting, install, repair, troubleshooting, and relocation on site.

• To set up and dismantle equipment for demonstrations.

• To conduct equipment familiarization training for users.

• To answer service enquiries.

• To attend user’s meetings.

• To install and commission new equipment at customer’s sites.

Service administration

• To prepare service quotations, contracts, report, and invoice.

• To arrange spare parts from suppliers.

• To send / deliver repair item and spare parts.

• To collect equipment for in-house repairs.

• To deliver new equipment to customers.

• To attack and pursue outstanding debts.

• To send faulty parts to vendors for checking and testing.

• To furnish technical information and quality report to Principal.

Job requirements:

• Min. Diploma in Engineering

• Min. 1 to 2 years of experience in going clients’ sites to perform servicing

• Experience in medical device servicing is advantageous

Apply now by sending your resume to [email protected]

We regret to inform that only shortlisted candidates will be notified

Alex Goh Hock Leong | CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Sciences) | 99C4599

Mandai Estate - North Region

$1,500 - $4,000

. Collabrative works environment

. Opportunity to work on diverse and challenging projects

. Competitive compensation package

Seek skilled Building Construction project, lead projects in all scope, AutoCAD, design & drafting, join our dynamic team,,, apply now

Our client is Germany-based company specializes in medical and laboratory technology, supplying hospitals and healthcare providers.

• Collaborate with development and product teams to understand requirements and functional specifications for effective test coverage.
• Analyze requirements and specifications to identify testing needs.
• Develop comprehensive test plans and create both manual and automated test cases.

Requirements:

• Degree in Computer Science/Software Engineering or equivalent.
• At least 2 years of Software Quality Assurance (QA) experience in test automation tools (such as Katalon, Cucumber, Selenium) and continuous integration/continuous deployment (CI/CD) pipelines (e.g., Jenkins).
• Proficient in database management and executing queries with MSSQL, along with experience in version control using GitHub.
• Knowledge in Agile/Scrum practices and capable of excelling in a collaborative, fast-paced work environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996