Total 823 Senior Executive mechanical engineer job vacancies in 7 Tuas Loop, Singapore

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical / Environmental Sustainability to join our Building Services team in Singapore.

You will be joining our Centre of Excellence (CenEx) team, led by one of our Technical Director who was recently conferred the SGBC-BCA Professional Leadership in Sustainability Award.

Senior Engineer – Mechanical (ESD)

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Leading mechanical services design and environmental sustainability design for building projects.
• Assume responsibility and undertake engineering tasks of increasing scope and complexity.
• Carry out site condition assessment, feasibility studies, energy audits and technical due diligence.
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing.
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants.
• In charge of jobs control, planning, monitoring, progress and job cost reporting.
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job.
• Assist in assessment and review of designs prepared by others on behalf of the clients.
• Liaise with authorities on plans submission and compliance.

Pre-Requisites

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore.
• Minimum 5-7 years relevant working experience in the design & supervision of building service projects and Fire Protection.
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage.
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures.
• Understanding of energy efficient mechanical systems and equipment with Green Building design experience and knowledge of Green Mark/ LEED is an added advantage.
• Competent user of relevant engineering software and simulation tools.
• Excellent written & spoken communication skills in English.
• Able to work independently & exercise initiative.
• Excellent delegation and communication skills, which sees you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS & Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

● Education background

● Work experiences

● Reason(s)for leaving

● Current and Expected salary

● Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

· Technically sound and consistently designed and delivered to client’s project requirements

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned.

· Assist Professional Engineer in management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Diploma in Mechanical Engineering from a recognized Polytechnic with more than 5 years of working experience in engineering design consulting practice on Building Services projects

· Degree in Mechanical Engineering from a recognized University and eligible for registration with the Professional Engineers Board with more than 3 years of working experience in engineering design consulting practice on Building Services projects.

· Being a Professional Engineer is an advantage.

· Strong project technical knowledge and design softwares

· Good supervision and project management skills

· Excellent with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Lead team of staff for successful delivery of projects

· Strong analytical skills would be preferred

· Excellent interpersonal, good written and verbal communication skills

· Strong time management and resources management skill

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

Are you interested in joining a team that is revolutionizing the resource exploration and navigation industry? Atomionics is developing quantum sensors using cold atom interferometry, where atoms are cooled to nearly absolute zero using lasers. At such extreme temperatures, these atoms behave like waves, enabling precise measurement of forces acting on them.

This technology has vast potential applications, including advancing the zero-carbon energy transition, enhancing the performance of inertial navigation systems, and revolutionizing the global positioning system. At Atomionics, you will have the opportunity to design, prototype, test, refine and manufacture Quantum Gravity Sensors. You will develop solutions to improve the performance of our sensor, while also making it compact and robust for field deployment on projects around the world.

Atomionics is backed by some outstanding investors across private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other notable angels.

Responsibilities

• Design and fabrication of jigs, mounts, and fixtures for optics, electronics, and vacuum assembly.
• Create CAD models and engineering drawings, and select appropriate manufacturing processes forprecision manufacturing and fabrication of optomechanical components.
• Structural, vibrational, and heat transfer analysis (FEA) to ensure robustness in harsh environment
• Design temperature and vibration control systems for different subsystems.
• Liaise with our international supply chain partners located in China, France, Germany, India, Italy,USA, etc. and work within a multicultural team.

About you

• An absolutely driven individual with creative problem-solving skills, analytical mind, and persistence, ideally, demonstrated
• Highly skilled with CAD software: Autodesk Inventor / Solidworks etc
• Deeply knowledgeable in manufacturing techniques, surface finishing and assembly
• Skilled in GD&T for engineering drawings including tolerance stacks
• Skilled with hands-on fabrication including machining lathe, CNC, laser cutter, 3D printers

Even better if you have

• Experience in thermal design, including heat sinks, heat pipes, liquid heat exchangers, peltiers and FEA for thermal simulations
• Experience in designing simple PCBs & cable harnesses
• Been through a full product development cycle for a device with a complex system architecture
• Worked on personal hobby projects (and can brag about them!)

What we can offer you

• A chance to learn about the intricacies of deep-tech research, product development, and strategy in a high-growth startup while working with some of the best engineers and physicists
• Work on the cutting edge of quantum technology
• Develop robust applications for translational research
• Board games and curry night

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are a growing engineering consulting company based in Singapore, seeking for a high performing professional to join us as an Executive Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Under the supervision of Senior Engineers, to perform initial engineering task on the mechanical services detailed design for building projects
• To prepare submission to authorities for approval of design
• To attend to project meeting with Client, PM and Consultants from other disciplines
• To attend site project meeting and site inspection and respond to technical queries
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• Handle client liaison and reporting
• Liaise with authorities on plans submission and compliance

Key Requirements

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore will be an advantage
• Minimum 3 years’ experience in the design & supervision of building service projects (Those with 5 years’ experience and/or Certified Professional Engineers will be considered for a senior position).
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Why Patients Need You

Whether you are involved in the design and development of manufacturing processes for products or supporting maintenance and reliability, engineering is vital to making sure customers and patients have the medicines they need, when they need them. Working with our innovative engineering team, you'll help bring medicines to the world even faster by imagining what’s possible and taking action.

What You Will Achieve

Working with Pfizer’s dynamic engineering team, you will play a critical part in managing the maintenance and reliability engineering activities involving the redesign, maintenance, and repair of utilities systems, buildings, and production/non-production equipment.

Your prior work experience and ability to apply your breadth of knowledge will help you adapt the standard methods and procedures. You will help us identify required delivery and process improvements that drive increased efficiency, throughput and quality. You will arrive at decisions on which methods and procedures are the best fit for different work situations.

It is your hard work and dedication that will make Pfizer ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

• Knowledge of mechanical equipment operations and maintenance skill and knowledge with experience in working in a team
• Hands on experience in pump overhaul (Centrifugal, Diaphragm etc.).
• Performance matrix environment.
• Knowledge of Computer Maintenance Management System (CMMS), current Good Manufacturing Practice (cGMP) and Right First Time technique.
• Able to demonstrates clear and concise written and verbal communication.
• Knowledge in Mechanical Equipment Troubleshooting and Analysis Skills.
• Knowledge and able to create Job Safety Analysis (JSA) / Risk Assessment (RA) in document system.

Qualifications

Must-Have

• Minimum 5 years of relevant experiences in pharmaceutical, chemical, or petrochemical industries for Senior position and Minimum 2 years for Junior position.
• High School Diploma or GED
• Willing to work in 12 Hours rotating shift.

Work Location Assignment: On Premise

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

We are looking for a Plant & Machinery (Mechanical / Electrical) Engineer for:

Metal shredder & non – ferrous separation / Vezanni Shear

Waste Wood To Energy Plant

Responsibilities:

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared and scheduled with the required level of equipment integrity and reliability.
• Ensure liaison with production team and other stakeholders to stay updated on the on-going maintenance activities.
• Ensure equipment documentation and Preventive Maintenance (PM) procedure are constantly updated.
• Ensure technical, environmental and safety aspects in all matters is assessed in compliance with Health and Safety regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): Mandarin, English (in order to liaise with the Mandarin speaking associates)
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC system, Conveyor belts
• Preferably Senior Executive specialized in Engineering - Mechanical/Automotive or equivalent.

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Responsibilities:

• Develop energy efficiency solutions for ACMV and control systems in data centers, commercial and industrial buildings (70% engineering, 30% sales).
• Present energy solution proposal to customer, including turnkey project and maintenance.
• Attend tender site show rounds, assess site conditions, create proposals, and react to RFQs/tenders.
• Effectively respond to client queries and expectations.
• Submitting quotations / proposals to customers in a timely professional manner and continuously follow-up closely.
• Grow the aftermarket service business.
• Contribute to team effort and be accountable for sales growth objectives
• Provide technical training to customers and internal workers.

Qualifications and Skills:

• Degree/Diploma in any Engineering background
• Minimum 2 years relevant sales experience in the ACMV, controls and energy solutions.
• Preferably Singaporean or PR.
• On the job skill coaching/in-house or external training provided
• Possess strong ACMV, controls and energy solution technical skills. Certifications such as SCEM, Energy Auditor and Energy Efficiency Opportunity Assessor would be a plus.
• Proven ability to make impactful business case to win multi-million ACMV, controls and energy solutions contracts.
• Have good existing network with facilities owners and M&E consultants in Singapore.
• Meticulous in execution of work duties, must possess a positive attitude and is hardworking.
• Strong interest in tackling climate change by helping the building owners improve energy efficiency
• Good interpersonal and communication skills

Salary will be commensurate based on qualification and experience

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

Roles & Responsibilities

• Reports to Construction Manager.
• To assist in site supervision works.
• Coordinate internally with inter-department and externally with clients & consultants.
• Coordinating for the project planning, documentation and execution of works on site.
• Coordination,supervision & monitoring the progress of the project works on site,manpower mobilization, materials planning & ordering.
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required.
• Assist in the preparation of the project schedule and coordinate for all submission.
• Responsible for the quality inspection of the bridge structure.
• Produce weekly site progress report and necessary submission.
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• Ensure all legal requirements under Singapore laws are compiled and ensure all standard operating procedures comply with specifications quality standards statutory and regulatory requirements.

Job Requirements:

• Degree in Civil Engineering/relevant studied recognized by PE Board, BCA or IES registered Resident Engineer (RE).
• Minimum 5 years’ working experiences in marine sector.
• Familiar with costing, contract, regulations and building operations.
• Oversee all site projects operations, functions, and requirements.
• Able to handle AutoCAD or relevant drawings submission.
• Required skill(s): MS Office, M.S. Project, AutoCAD.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries.

Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.

Support production line issues with appropriate and permanent corrective solution, as and when necessary.

In plant expansion phase, work closely with process/equipment/technology and contribute to establish good product quality and specification.

Establish investment proposals and projects in order to utilize best available practice and competence.

Support managements' directives and projects as and when needed.

Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.

Candidate working in Cell PD is responsible for development new cell processes or optimize existing processes in Solar cell Manufacturing.

Candidate will need to work with external suppliers to bring in new materials or integrate new processes into the current cell processing line. Candidate will also work on continuous improvement projects to improve the cell efficiency and cost of a solar cell.

Candidate with semiconductor or solar cell background would have an added advantage.

Able to mentor junior cell PD engineers and be a role model for them.

Depending on the competencies developed, process development will be required to be rotated to different departments as required by management.

• Degree in engineering disciplines (electrical, mechanical, mechatronics, material science or related discipline)
• 5 years or more working experience
• Knowledge in product design environment.
• Knowledge of interpreting design intent for DFM and DFA
• Strong knowledge of semiconductor or PV.
• Knowledge in Prototype PV Module design functionalities that ensure good quality and manufacturability would be an advantage
• Knowledge of product functionality of PV modules/panels would be an advantage
• Good presentation and communication skills
• Must be able to work independently and knowledgeable in project management
• Supportive in other job functions assign by superior

Responsibilities:

• Provide technical support and assist Manager in project planning and coordination of all site activities.
• Prepare and revise engineering documents, drawings, risk assessments, method statements, safe work procedures, operations, and maintenance manuals for all necessary works.
• To issue final specification/bill of materials for purchase order and negotiate with vendors and subcontractors to ensure budget and terms and conditions of purchases are met.
• Liaise with vendors and subcontractors to ensure timely delivery of goods, equipment, and fabricated items.
• Coordinate and supervise construction teams and subcontractors for the erection, testing and commissioning of installation of equipment to the required specification and quality.
• Liaise with consultants, owners, and relevant authorities on their engineering request.
• Plan and schedule work activities at sites in accordance to master program and ensure work is conducted in a timely and safe manner.
• Monitor project budget margin as set forth by the management.
• To ensure timely submission of project progress claim.
• Ad-hoc duties assigned by the Management from time to time.

Requirements:

• Candidate must possess at least Bachelor's Degree in Mechanical Engineering or any related field.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Possess keen knowledge of water and wastewater treatment technologies and the industry in general.
• Able to work independently and a multitasker/ able to cope in a fast-paced environment.

Please indicate your current and expected salary in your resume.

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Executive Engineer (Civil & Structural) to join the Singapore Office in a growing engineering consulting business.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• To work with the Qualified Person (QP) to develop structural scheme for structures and buildings.
• To carry out engineering analysis to assess the stability and load to be sustained by the structures.
• To carry out engineering design in according with Eurocodes or relevant international design codes.
• To prepare submission to authorities for approval of design.
• Provide technical advice to team members/colleagues in supporting or leading role and embrace a culture that values teamwork
• To attend project meetings with Client, Project Manager and Consultants from other disciplines.
• To attend site progress meetings and reply to technical queries.
• To lead junior engineer in delivering design and seek clearance for all relevant parties and authorities
• To conduct supervision & contract administration when required

Key Requirements

• Degree in Civil/Structural Engineering recognised by Professional Engineers Board, Singapore.
• Minimum 5 years of experience with design of multi-storey/high-rise building from a local engineering consulting environment will be an advantage.
• Those registered as Professional Engineer with PEB and/or have more relevant working experience will be considered for senior role.
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures.
• Competent user of relevant engineering software.
• Excellent written & spoken communication skills in English.
• Able to interact and work with colleagues and member of other consultants at various levels.
• A team, client and delivery focused working style.

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Key Responsibilities:

• Install GT Power & Distribution Transformers, HT & LV Switchgear, and substation equipment.
• Oversee material planning, cable tray/support installation, and project coordination.
• Lead testing & commissioning of electrical systems.
• Perform quantity surveying and ensure quality assurance/control.
• Manage electrical project timelines and budgets.
• Coordinate with other service providers to ensure smooth site installations

Requirements:

• Minimum 7 years experience in electrical engineering, ideally in the semiconductor industry.
• Proven expertise in electrical system installation and project management.
• Strong skills in material planning, quantity surveying, and quality control.
• Bachelor's degree in Electrical Engineering or related field.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Identify, propose and evaluate new business opportunities for business growth, with respect to the sale/purchase of refining products including procurement of intermediate components for value-added feedstock/blending entities, and third-party service collaboration.
• Coordinate with internal and external stakeholders to establish operating, commercial and accounting procedures for managing third-party contracts and agreements.
• Oversee day-to-day refinery performance and ensure stakeholders adherence to contractual quantity and obligations. Liaise and collaborate with stakeholders to resolve issues and concerns.
• Work closely with internal stakeholders to support the needs of refinery feedstock demand and supply of products, to achieve optimal refinery operation.

• Degree in Chemical Engineering

• At least 2 years' relevant experience in oil refinery/petrochemical.
• Experience in process/development engineering or commercial work knowledge will be advantageous