Total 26,553 Full-time quality assurance engineer job vacancies in Singapore

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:
- Maintains the Company Integrated Management System, ensuring all business processes are documented, have a designated owner and a plan for their maintenance, aligned to Survitec strategy and associated accreditation and/or regulatory frameworks.

- Perform internal audit procedure and schedule as per Department audit plans, to include the audit Scope, Objective and Criteria. Deliver the audit report including findings; agree on corrective actions with auditees and refer findings to the Manager.

- Investigate non-conformances using current and appropriate methods, systems, and procedures, taking action to solve immediate compliance issues.

- Identifies shortcomings in quality processes or outputs, identifies root cause and works with internal stakeholder to adjust processes or working practices to remove or mitigate any production quality issues; uses established change management programs to address issues and deliver sustained improvements.

- Attend aviation related training and create/refresh and update on internal company aviation training notes.
Conduct internal company training as per aviation requirements.

- Implements systems to ensure compliance with QHSE policies, group and Customer requirements; ensures audit, inspection and risk management are adhered to and embedded throughout the system.

- Document control system management, revision and updating.

- Defines and communicates the processes and schedule for audit, working with colleagues from the Quality function to ensure all supplier, operational, technical, health, safety and environmental audit activity is carried out as planned.

- Leads and participates in quality, non-conformance and customer complaint investigations.

- Provides written reports on audit and investigation findings, implements and monitors CAPA and improvement actions. Ensures findings are reported and escalated appropriately.

- Works with Survitec QHSE colleagues to develop tools and dashboards for the statistical analyses on which recommendations for improvement are based. Ensures outputs from QHSE reporting tools and dashboards are communicated to and understood by the business.

- Inform manager of audit findings and compliance issues, including capability gaps, workflow issues or matters requiring quality development or improvement.

- Any others tasks/projects as assigned by line manager from time to time.


Job Requirements:
- Degree/Diploma in Engineering (preferably Quality Engineering).

- At least 2 years of Quality Assurance experience in Aviation industry.

- Knowledge of ISO 9001, ISO 14001, and TS 16949.

- Proficiency in statistical tools and Microsoft Office.

- Strong analytical, problem-solving, and communication skills
Certified Internal/Lead Auditor (preferred).

- Train the trainer qualification will have added advantage.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

The Application Engineer reports to Sales Director in Singapore. He/ She will support pre-sales and post-sales activities in SEA and India region. These could include joint visits with salespersons; preparing proposals according to customer’s requirements; liaising with vendors & sub-contractors, and project execution till commission. Other responsibilities include on-site survey; and product and application support.

The responsibilities of this role are:

• Understand customer requirements and provide technical advice to sales and customers.
• Presales technical service for internal and external customers.
• Review project specifications, clarify doubts on technical specifications, and provide technical engineering and sales support for customer projects
• Provide primary technical proposal according to the requirements of customers' enquiry and carry out necessary technical clarification with customers.
• Release drawings for BOM creation, costing and production
• Responsible for Project execution after PO was received.
• Assist in reviewing technical documentation in the system.
• Provide expertise advice to solve customer technical questions by phone or email.
• Business trip to provide onsite support to key projects.
• Support after sales.Onsite troubleshooting and provide technical advice to customers.
  Quality complains. Facilitate RMA such as simple investigation, coordinate in-depth analysis with factory, 3rd parties to finalise closure.
• Provide product and technology training for internal and external customers.
• Support the new product certification and existing product certification renewal.
• Support marketing activities including technical exhibitions and seminars, catalog / brochure proofreading and marketing roadshow preparation.

The ideal candidate will need to have the following qualities and experience:

• Bachelor’s degree in engineering sciences, eg: Flow Control, Instrumentation or comparable qualification.
• Project Management Training (PMI certificate preferred).
• Strong analytical/problem-solving skills, time management and awareness of business and finance implications.
• Strong at innovation, initiative, professionalism, organizational and interpersonal skills, teamwork, integrity, accountability and a sense of urgency.
• Minimum 5 years’ experience in project management and/or Process Automation
• Knowledge of Instrumentation Controls will be an added advantage
• Basic knowledge of CAD and related designing software.
• Able/Willing to travel frequently to customer sites.

Responsibilities:

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:

• Design and build advanced applications for ubuntu platform.
• Collaborate with cross-functional teams to define, design and implement new features.
• Unit-test code for robustness, including edge cases, usability, and reliability.
• Work on bug fixing and improving application performance.
• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the standard adopted by the Authority.
• Liaise with stakeholders on the requirement, design and testing issues.

Qualifications & Requirements:

• Tertiary qualification in Electrical/ Electronics/ Mechanical Engineering/ Computer Science or a relevant discipline
• At least 3 years in software development and system integration
• Experiences in C++ application development
• Knowledge or work experiences in the following areas is an added advantage
• Java application development
• Web application using HTML/HTML5, JavaScript and JavaScript Framework (i.e. AngularJS, ExtJS, JQuery, Bootstrap)
• Interfacing with database (i.e. MS SQL, Oracle, MySQL) using ODBC/JDBC and SQL
• Multi-tier software architecture design and implementation
• Object-oriented software design and UML modelling
• Virtualization using Containerisation (e.g. docker)
• Applications development and deployment into Commercial Cloud (e.g. AWS)
• Application development for Desktops / Workstations
• Web services in Commercial Cloud (e.g. AWS)
• AWS Lambda Functions using Python or JavaScript
• Single Sign-on solutions (e.g. OAuth, OpenID Connect, SAML)
• Secure communication (e.g. MQ, MQTT, SFTP, FTP-S)

Job Description

• To ensure that the contractor co-ordinates the works of various contractors.
• To agree to detailed programmes of work-time chart and representation of site plans.
• To check that all necessary drawings and instruction have been given to contractors and authorization obtained, in accordance with the agreed programme
• To check that materials are ordered in good time and permits obtained.
• To check that all construction works are carried out in a safe manner, and that the site is kept secure.
• To watch for faulty workmanship and materials incorporated in the works and to issue instructions for rectification.
• To check and line and level of layout of structure during erection and that intentions of "contract" drawings are adhered to.
• To check structural slab, beam and column sizes and reinforcements placed and that intent of designs are followed.

Requirements:-

• Recognised Degree in Civil/Structural Engineering with valid RE Accreditation Certificate from IES.
• Must have at least 5 yrs of post graduate experience respectively in supervising building projects. Applicants with both design and supervision experience as R.E. will be favourably considered.
• Fully conversant with Building Contract Act and Regulations. Able to administer contracts professionally, maintain site records and contract documents systematically, to meet reporting requirements under Building Control Act.
• Extensive experience in the supervision of bored pile systems, precast concrete, and structural steel construction.
• Experience with canal/ drainage construction will be favourably considered.
• Completed one HDB project as resident engineer.

Contract duration: 45 months

Location: Kembangan

Project: HDB BTO

Able to start work by Feb 2025

Hi our Client is looking for a dynamic Chip Design Engineer to be part of their team.

Job Description

1. Design and implement high-speed memory interfaces and circuits.

2. Deliver AMS circuits in SerDes and evaluate circuit topologies.

3. Develop and optimize high-speed interface modules (e.g., bandgap, bias circuits,LDOs, ADCs, DACs, oscillators, filters, Tx/Rx equalizers, and serializers/deserializers).

4. Collaborate with the verification team to debug in the lab.

5. Work with software teams and customers to troubleshoot and enhance system performance.

Job Requirements:

1. Bachelor's in Communications, Electronic, or Computer Engineering;

2. Min 4 yrs working experience in ASIC design, with knowledge of the ASIC development process.

3. Proficiency in AMS circuit design and Electronis Design Automation tools.

4. Experience with high-speed interfaces (e.g., DDR, SerDes, PCIe) is a plus.

Interested candidate please email your resume to [email protected]

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

We are seeking a skilled and proactive Network Maintenance Engineer to provide comprehensive support for multiple customer network environments. This role involves maintaining and troubleshooting a wide range of network devices, including routers, switches, access points (APs), Wireless LAN Controllers (WLCs), Cisco Identity Services Engine (ISE), as well as supporting Windows servers and laptops. The ideal candidate will have a strong background in helpdesk support, network and system maintenance, with a customer-focused and solution-oriented mindset.

Key Responsibilities:

• Helpdesk and Troubleshooting:
  • Act as the primary point of contact for support requests across multiple customer environments.
  • Investigate and resolve network and system-related issues, such as connectivity problems, faulty devices, or server issues.
  • Provide laptop and Windows server support, addressing common problems like login failures, configuration errors, and hardware issues.
  • Simulate customer environments to replicate and diagnose complex issues.
  • Document resolutions and create knowledge-based articles for future use.
  • Stay updated on changes across all supported customer environments.
• Maintenance and Change Request:
  • Replace or repair faulty network and system equipment, such as access points, switches, and laptops.
  • Implement minor network and system configuration changes, including enabling switch ports, changing VLANs, onboarding new devices to Cisco ISE, or updating Windows server configurations.
  • Firmware and OS patching for network and system equipment.
  • Ensure all network and system devices are operating optimally and securely.
• 24x7 Standby and Incident Response:
  • Participate in a 24x7 standby rotation with a duty phone for handling urgent incidents.
  • Respond promptly to calls and emails, diagnosing and resolving issues to restore normal operations.
  • Manage multiple incidents simultaneously, ensuring effective communication and resolution for all customers.
• Testing and Collaboration:
  • Test product updates, patches, and integrations to ensure compatibility and stability.
  • Collaborate with internal teams and external vendors to resolve complex issues.
• Documentation:
  • Maintain detailed and accurate documentation of network configurations, system setups, incident responses, and maintenance procedures.
  • Ensure all team members have access to up-to-date customer system information.

Required Qualifications:

• Education: Bachelor's degree in Computer Science, Information Technology, or a related field.
• Experience: Minimum of 1 year of experience as a maintenance engineer, with a focus on maintenance of enterprise environments, preferably in customer-facing roles.

Technical Skills:

• Proficiency in working with various network products, including Cisco, Juniper, Alcatel, and Aruba.
• Strong expertise in maintaining and troubleshooting network components such as routers, switches, APs, WLCs, and Cisco ISE.
• Experience in supporting Windows servers and laptops, including hardware and software troubleshooting.
• Familiarity with common system administration tasks like user account management, group policies, and server configuration.
• Ability to simulate customer environments for diagnostic purposes.
• Excellent communication and problem-solving skills with a customer-centric approach.
• Detail-oriented with the ability to manage multiple tasks simultaneously

Preferred Qualifications:

• Certifications in networking related technologies.
• Experience in a maintenance-focused role serving multiple external customers.

Soft Skills:

• Strong problem-solving and analytical skills.
• Excellent communication and customer service abilities.
• Ability to work under pressure and manage critical incidents effectively.
• Detail-oriented with a commitment to maintaining high standards of network and system reliability.

We are seeking a skilled AWS Data Engineer to join our team and support our data initiatives within the Singapore Public Sector. The ideal candidate will have extensive experience in ETL processes, data loading, and data management using AWS services.

Responsibilities

• Perform end-to-end data loading using AWS Glue and Lake Formation.
• Develop and manage ETL workflows using AWS Lambda, Step Functions, PySpark, and Python scripts.
• Load data into AWS RDS and manage data storage in S3 Buckets.
• Provide data for BI reporting using Tableau, leveraging data from S3 Buckets and RDS.
• Implement and manage AIML workflows in AWS using SageMaker, including model building and deployment.
• Utilize AWS Bedrock for advanced data processing and analytics (knowledge and experience with AWS Bedrock is a plus).
• Install and configure native AWS services as required.

Requirements

• Proven experience with AWS Glue, Lake Formation, Lambda, Step Functions, PySpark, and Python.
• Strong understanding of AWS RDS, S3 Buckets, and data management best practices.
• Experience with BI reporting tools, particularly Tableau.
• Familiarity with AIML workflows and model building using AWS SageMaker.
• Knowledge of AWS Bedrock is a plus.
• Experience with the installation and configuration of AWS native services is a plus.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.

Preferred Experience

• Previous experience working within the public sector.
• AWS certifications related to data engineering and machine learning.

About Cognizant

Cognizant (NASDAQ-100: CTSH) is one of the world's leading professional services companies, transforming clients' business, operating and technology models for the digital era. Our unique industry-based, consultative approach helps clients envision, build and run more innovative and efficient businesses. Headquartered in the U.S., Cognizant is ranked 195 on the Fortune 500 and is consistently listed among the most admired companies in the world. Learn how Cognizant helps clients lead with digital at www.cognizant.com or follow us @Cognizant.

• Position: Offshore Vessel Superintendent
• Singapore Maritime Industry
• Monday - Friday (1 Day WFH): 9am - 6pm
• Basic Salary: $7,000 - $10,000 + Bonuses + Medical Benefits
• Office at Pandan Road - Transport Pick Up from Clementi MRT

Company provides AWS & Performance Bonus + Transport Pick Up + Lunch Provided + Medical Benefits / Insurance such as Dental, Specialist Claims, Health Screening

Summary

• Responsible for the technical management / aspect of the assigned vessel.

Job Description

• Operate and maintain the ship's marine equipment safely, economically, and efficiently in accordance with customer contracts / Charter Party, within approved budgets, to the satisfaction of both owners and their clients.
• Serve as the onshore contact point for the Vessels in day-to-day operations related to technical management and mobilization activities.
• Maintain contact with the owner in daily operations, as defined and agreed with the Marine Manager.
• Ensure that Statutory and Classification surveys for all plant and equipment on the vessels are carried out.
• Perform preventive and corrective maintenance to prevent technical/operational non-conformities that may lead to downtime.
• Contribute to the continuous improvement of the PMS maintenance system by providing proactive feedback to the Fleet Manager and Marine Manager.
• Monitor and follow up on the vessel’s technical performance and defined KPIs.
• Take immediate actions to adjust and improve performance in case of non-conformities or when deviations are observed/reported.
• Follow up and ensure corrective actions are implemented in case of technical-related incidents and non-conformities.
• Analyze breakdowns and technical incidents and suggest experience transfers to the fleet.
• Report the vessel's technical status on a weekly basis to the Marine Manager.
• Plan, coordinate, and supervise ship repairs and dry-docking of vessels in cooperation with other stakeholders.
• In case of major breakdowns, arrange repairs, provide spares and service engineers, and supervise the repair work to ensure safety, quality, and cost-effectiveness.
• If insurance is involved, contact, inform, and follow up until settlement in coordination with the Fleet Manager and Marine Manager.
• Lead Vessel Condition Assessments.
• Participate in appraisals and selection of key personnel onboard the vessel.
• Comply with the requirements and report non-conformities.
• Actively cooperate with other disciplines within the fleet to optimize overall vessel and fleet performance.
• Be proactive and seek effective solutions for both the company and clients.
• Show a high degree of flexibility in ad hoc situations.
• Contribute actively to improving routines and solutions.
• Perform other duties as assigned.

Job Requirement

• Minimum 3 years of relevant experience.
• Sea time as Chief Engineer on an offshore vessel preferred.
• Experience in operations / technical scope for OSVs.
• Proven experience in budgeting and cost control.
• Sound knowledge in:

- General vessel machinery, equipment, and systems.

- Classification and statutory requirements.

- Engine types, including Caterpillar, Cummins, Wartsila, and Niigata.

- FPP, CPP, Z-Pellers, and Azimuth drives.

- DP systems and maintenance.

- Diesel-electric drives and hybrid engine configurations.

- Computer-based PMS and ancillary software.

• Preferably possess ship management skills.
• Able to travel at short notice.

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

Job Description

As part of our system Engineering team, you play a key role in the design and development of our Inspection and Metrology machines. In your role you will work hands-on on the mechanical integration, process optimization and automation of the machine. Your work will involve integration of the mechatronic, optical and software building blocks and will hence work closely together with Mechanical design, Hardware, Optics and software teams.

It is your job to analyze customer requirements, build up a deep understanding of the problem and translate these into automated solutions that you detail clearly in measurable design requirements. To verify the solutions, you will build and test high-speed mechatronic setups for spec validation and critical parameter analysis. Once these are confirmed, you will coordinate the design and implementation in the different teams to eventually integrate tested modules and building blocks in the machine and assess the impact of the integration on the overall machine performance.

You get the chance to confirm high speed Pick and Place handling capabilities at key customers on site and broaden your customer and application know how along the way.

Furthermore you seek the challenge of understanding, analyzing, (re-)defining, and implementing sophisticated material handling flows until the level of detailed micro-sequences.

You will often write PLC level test sequences for mockup validation and data collection. Once the system is validated, translate these sequences into SW requirements.

As a senior system Engineer, you are considered as project/product owner. That means, besides technical work, you will also lead a multi-disciplinary team on project/product basis. You need to consider both technical but also commercial (e.g. budget, timeline, resource) aspects while managing your project/product.

Minimum Qualifications

• MS degree or BS degree with outstanding skill in electro-mechanical, electronics, software or mechanical engineering; with sound knowledge on basic software logics
• 5+ years relevant experience in an automation oriented engineering role in a high-end equipment company, covering most of following technical domains: machine conceptual and mechanical design, setting up specifications, PLC controller hardware and software design, user interface, SW (describing, testing of flows), conversion, test protocols, debugging, characterization, lead improvement projects
• Strong analytical capabilities
• Programming skills are a plus (PLC controllers, C, C++ Python, VBA, …)
• Independent thinking, challenging existing ideas and approaches
• Hands-on, self-organized, taking initiative and ownership
• Occasional travel within Asia & Europe
• Proficient in English

Job Description: We are seeking a skilled and motivated Network & Security Engineer to join our dynamic team. As a Network & Security Engineer, you will play a critical role in designing, implementing, and maintaining robust network & security infrastructures for our diverse range of clients. You will work collaboratively with other IT professionals to integrate various technologies, ensuring the stability, integrity, and efficient operation of our clients' network & security infrastructure.

Key Responsibilities:

• Design and deploy functional networks (LAN, WAN, WLAN, VLAN) & security (FW, NAC) solutions tailored to client needs
• Configure and install routers, switches, wireless controllers, firewalls and other network devices
• Monitor network performance and integrity, ensuring high availability and reliability
• Troubleshoot and resolve network issues escalated by support teams
• Communicate with clients to understand their requirements and provide technical support
• Maintain comprehensive technical documentation
• Propose and implement improvements to network performance, security, capacity, and scalability
• Participate in project deployments, ensuring seamless integration and implementation of network & security solutions

Requirements:

• 3 to 5 years of experience in the networking field, preferably with a systems integrator
• Hands-on experience with wired and wireless networking deployment
• Aruba Wired or Wireless certification is a must
• Well-versed with the different types of network routing and switching technology.
• Knowledge of wireless technology and products.
• Proven experience as a Network Engineer or in a similar role
• In-depth knowledge of best practices in network management, control, security, and monitoring
• Good experience with firewalls, VPNs, remote implementations, and troubleshooting
• The ability to set up and configure server hardware will be an added advantage
• Excellent organizational, prioritization, and multitasking skills

Contract Type: 12 Months (Renewal)
Salary: SGD4,000 to SGD5,000
Location: MacPherson
Working Hours: Mon – Fri 9 am to 6 pm (onsite)
Commencement: Immediate

Job Description

• Plan, deploy and implement Data Loss Prevention on security projects and initiatives.
• Responsible for management, advanced configuration, monitoring and finetuning of Data Loss Prevention solution.
• Configure, develop and maintain DLP tools & platform.
• He/she will be reporting to the DLP Team Lead will be working on projects and operational work.
• Responsible for processing requests, investigate operational issues and facilitate security investigation by providing the necessary information in accordance with approved policy and procedures as well as process improvement.

Requirements

• Diploma/Degree in Computer Science, Engineering or equivalent.
• At least 5 years of working experience in IT Incident Management, DLP Operations.
• Experience in multiple channels of DLP implementation and operations.
• Good team player as well as strong communications skills.
• Strong analytical skills and ability to work independently.

Morgan McKinley Pte Ltd

Syairah Banu

EA Licence No: 11C5502

EA Registration No. R21100522

Key Responsibilities:

• Assist the HOD and manager in achieving service goals, KPIs, and departmental targets.
• Ensure safety and effectiveness of medical equipment by implementing programs that minimize disruptions.
• Manage vendor maintenance agreements for medical equipment.
• Prepare specifications for tenders, evaluate submissions, and provide technical recommendations.
• Act as a technical consultant to hospital staff, guiding them on equipment needs.
• Train hospital staff on proper equipment handling for optimal use.
• Lead and coordinate the medical equipment management team (commissioning, maintenance, inventory, decommissioning).
• Assist in preparing monthly reports and annual budgets.
• Ensure compliance with industry standards (ISO, JCI, OHSAS, etc.).

Requirements:

• Min Degree in Biomedical Engineering, Electronic or Electro-mechanical Engineering, or equivalent.
• Min.3 years of relevant healthcare industry experience.

If interested, please email your resume to [email protected] or telegram @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

• Oversee contract execution and monitor installation progress, ensuring timely delivery through coordination with clients, consultants, and subcontractors.
• Prepare and review method statements, shop drawings, technical submissions, and work progress reports for M&E-related tasks.
• Liaise with stakeholders to resolve technical and site issues, and coordinate with authorities for inspections, testing, and commissioning.
• Assist in procurement of materials, equipment, and labour within budget while supporting project negotiations.
• Apply expertise in Data Centers, DfMA, and specialized systems such as VAV/VRV, chillers, chilled water pipes, and lighting control systems.

Requirements:

• Diploma in Mechanical/Electrical Engineering or equivalent.
• At least 2 years of experience handling and monitoring the progress of projects in Construction industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cloud Infrastructure Engineer (Migration Engineer) to join us!

• Work with Agency IT on the IT onboarding and enablement of Agencies’ endpoint to the central architecture in a phased approach, ensuring a smooth transition for each agency.
• Work closely with Agency IT to whitelist network access for applications, including network configuration changes, connectivity testing, troubleshooting, and integration with SSO, to ensure seamless integration to the central architecture.
• Work with Agency IT on the device provisioning process using Windows Autopilot and coordinate the central provisioning of laptops, if applicable.
• Work with Agency IT to troubleshoot app packaging issues and ensure the compatibility and functionality of the applications on the new endpoint solution.

• Comfortable with a 1-year direct contract
• At least 5 years of experience in the above domain areas
• Proven track record of large-scale ICT migration projects, particularly in the deployment of endpoint, end user services, or security solutions.
• Good understanding of endpoint management, endpoint security, and network solutions including Windows Autopilot, Microsoft Endpoint Manager, M365 services, Entra ID, SSE technologies, DNS, and network architecture.
• Experience in network troubleshooting for endpoints and applications.
• Candidate who can start work within short notice is preferred.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience. Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Job Description:

1. Contribute to defining product specifications, microarchitecture, and implementation for high-speed memory interfaces.

2. Perform RTL coding, LINT checks, and initial testing of designs.

3. Collaborate with the verification team for debugging in the lab.

4. Work closely with the software team and/or customers to troubleshoot, debug, and optimize system performance.

Job Requirements:

1. Bachelor’s degree in Communications, Electronic, or Computer Engineering;

2. 6 of experience in ASIC design, with a strong understanding of the ASIC development process.

3. Proficiency in Verilog HDL coding and EDA tools for synthesis and timing analysis.

4. Experience with high-speed interfaces (e.g., DDR, SerDes, PCIe) is a plus.

5. Strong problem-solving skills and the ability to deliver results within deadlines.

6. Excellent organizational and communication skills.

Interested candidate please send your resume to [email protected]

Description

• Design and optimization of mechanical components for HVAC systems
• Analysis of mechanical systems, including structural, fatigue, thermal and vibration
• Develop manufacturing drawings in accordance with applicable standards
• Construct and build developed systems
• Collaborate and interact with external vendors for component selection, manufacturing and system assembly
• Read, interpret and review technical drawings, schematics, and computer-generated reports
• Generate operating procedures and provide technical information
• Collaborate and analyze customer design proposals, specifications and requirement, and to evaluate and propose solutions

Requirements

• Bachelor’s degree in mechanical engineering or equivalent engineering degrees
• Diploma with good experience in mechanical design and system assembly will also be considered
• Good mechanical aptitude and knowledge
• Proficient in SolidWorks and modeling
• Excellent problem solving and project management skills
• Background in HVAC engineering is a plus
• Experience in product development especially in HVAC product development is a plus
• Technically sound coupled with experience in sourcing, negotiation and cost control
• Possess initiatives, logical thinking and good analytical abilities, and able to resolve issues from multiple perspectives.
• Passion for the job and a challenging spirit preferred.
• Strong communications and interpersonal skills

Service Engineer (Semiconductor)

5 days, 9am- 6pm, may need to support short term night work

Salary: $2700- $3800

Address: Woodlands

Job scope:

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing
• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works
• Serves as company contact point with customer on technical matters
• Attends to customers complaints and provides timely solutions
• Other ad hoc duties

Requirements:

• Diploma/ Degree in Mechanical/ Mechatronic Engineering or related discipline
• Experience in semiconductor industry is required
• Prior experience in cleanroom fabrication is a must

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Job Description:

• Perform global structural analysis with all major connection detail ULS/ALS.
• Perform global fatigue analysis with all major connection detail FLS.
• Perform complete structural analysis reports for all main structure foundation, support, lifting, sea fastening, load out, dry & wet tow up to classification society approval level.
• Able to perform steel beam design such as ULS bending, shear, bucking verification and SLS deflection verification using the beam section properties.
• Perform mesh load transfer for structural analysis.
• Perform structural design specification.
• Perform main scantling and steel weight calculation.
• Perform structural construction standard in detail engineering.
• Perform Collision analysis.
• Design and perform all kind of major structural connection detail and analysis.
• Coordinate with classification societies for design and analysis approvals.
• Design and drafting of all structural drawings such as hull lines plan, structural category plan, deck loading plan, full penetration welding plan, scantling drawings, major connection scantlings etc. (Optional)

Requirements:

• Academic qualification in Marine/Ocean Engineering or Civil Engineering
• Minimum 8 years of relevant working experience in the whole process of concept/basic design/detail engineering of semi-submersible substructure/floater design in Floating Offshore Wind Turbine (FOWT) or offshore rig industry.
• Proficient in software packages in SESAM Genie, SACS, Python and AutoCAD
• Good knowledge of all regulations such as DNV, ABS, BV, IEC etc.

Responsibilities:

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:

• Design and build advanced applications for ubuntu platform.
• Collaborate with cross-functional teams to define, design and implement new features.
• Unit-test code for robustness, including edge cases, usability, and reliability.
• Work on bug fixing and improving application performance.
• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the standard adopted by the Authority.
• Liaise with stakeholders on the requirement, design and testing issues.

Qualifications & Requirements:

• Tertiary qualification in Electrical/ Electronics/ Mechanical Engineering/ Computer Science or a relevant discipline
• At least 3 years in software development and system integration
• Experiences in C++ application development
• Knowledge or work experiences in the following areas is an added advantage
• Java application development
• Web application using HTML/HTML5, JavaScript and JavaScript Framework (i.e. AngularJS, ExtJS, JQuery, Bootstrap)
• Interfacing with database (i.e. MS SQL, Oracle, MySQL) using ODBC/JDBC and SQL
• Multi-tier software architecture design and implementation
• Object-oriented software design and UML modelling
• Virtualization using Containerisation (e.g. docker)
• Applications development and deployment into Commercial Cloud (e.g. AWS)
• Application development for Desktops / Workstations
• Web services in Commercial Cloud (e.g. AWS)
• AWS Lambda Functions using Python or JavaScript
• Single Sign-on solutions (e.g. OAuth, OpenID Connect, SAML)
• Secure communication (e.g. MQ, MQTT, SFTP, FTP-S)

We are looking for a detail-oriented and organized individual to coordinate the delivery of network and hosting infrastructure equipment to data centers and other facilities. This role involves working closely with vendors, logistics teams, and internal stakeholders to ensure timely and accurate deliveries, supporting server infrastructure deployments.

Key Responsibilities:

• Oversee equipment or services deliveries to data centers, warehouses, and other sites.
• Coordinate ordering and procurement with internal teams, ensuring timely deliveries.
• Manage vendor and supplier relations, track orders, and resolve any delivery issues.
• Request and manage access passes to ensure that deliveries of services / equipments to data centers is provisioned, ensuring compliance with protocols.
• Verify deliveries against orders, document discrepancies or damages, and perform quality checks.
• Maintain organized records of logistics activities and report on delivery performance
• Communicate with stakeholders, providing delivery updates and resolving issues.

Qualifications:

• Bachelor's degree in Business, Logistics, IT, or related field.
• 1+ year of logistics coordination or vendor management experience.
• Strong organizational, communication, and time-management skills.
• Attention to detail and accuracy in handling deliveries and documentation.
• Proficiency in Microsoft Office Suite.
• Familiarity with data center operations and network infrastructure (preferred).

Preferred Qualifications:

• Experience in data center/server environments and logistics practices.
• Knowledge of vendor management and procurement.
• Experience working in high-security environments.

Working Conditions:

• Occasional evening or weekend work to coordinate deliveries or handle urgent requests

Service Engineer (Semiconductor)

• 5 days, 9am- 6pm, may need to support short term night work
• Salary: $2700- $3800
• Address: Woodlands

Interested applicants can send your resume to ✉ [email protected] or WhatsApp: +65 94283063 and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Job scope:

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing
• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works
• Serves as company contact point with customer on technical matters
• Attends to customers complaints and provides timely solutions
• Other ad hoc duties

Requirements:

• Diploma/ Degree in Mechanical/ Mechatronic Engineering or related discipline
• Experience in semiconductor industry is required
• Prior experience in cleanroom fabrication is a must

Leo Shin Guan Reg No: R22108030

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Review and thoroughly understand ISO requirements, technical drawings, project scope, contractual obligations, and subcontract agreements. Collaborate with consultants to address technical issues before construction begins.
• Prepare short- and medium-term project plans, seek feedback and approval from superiors, and execute tasks in line with the detailed schedule.
• Ensure all work is conducted in compliance with approved drawings, quality standards, and Environmental, Health, and Safety (EHS) regulations, with a strong focus on maintaining excellent housekeeping practices.
• Manage quality processes by implementing recording systems, analyzing results, and developing action plans for continuous improvement.
• Maintain accurate records to ensure compliance with EHS, quality, client, and regulatory authority requirements.
• Oversee cost management, ensuring materials for temporary and permanent works are handled carefully to avoid damage and minimize wastage within acceptable limits. Avoid rework or abortive work that could significantly impact time and costs.
• Handle ad-hoc tasks assigned by the Project Manager as necessary for successful project execution.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270