Total 8,095 Senior Executive quality control engineer job vacancies in Singapore

The Engineer is responsible for handling engineering design review and analysis assignments normally involving a major project or several smaller or less complex projects. These projects by nature of their complexity and difficulty, require the fully competent application of conventional knowledge in a particular field of engineering or science. Through broader and more technically challenging work assignments, will develop a thorough understanding of policies, methods and procedures.

Job Duties/Roles

• Provide risk and reliability engineering activities for marine and offshore projects utilizing both qualitative and quantitative reliability analysis methods such as HAZID, HAZOP, Fault tree analysis, Quantitative Risk Assessment, fire/explosion/dispersion consequence simulations, etc.
• Review engineering technical specifications and drawings in the area of process and control engineering.
• Prepare technical reports to identify units posing an excessive risk to Safety, Assets, and the Environment.
• Advise and confer with engineers in design review meetings and technical workshops to give risk and reliability findings and recommendations.
• Active in assisting the team with business development opportunities and technical proposal drafting.
• Perform any duties assigned by the supervisor.

Knowledge, Skills and Abilities Required (KSAR)

• Knowledge of related technical disciplines is preferred.
• Related experience in their field and demonstrated capabilities preferred.
• Independent, minimal supervision required due to specialized nature of the position.
• Manage multiple projects simultaneously.
• Knowledge of company business policies and procedures.
• Human relation skills are necessary to maintain positive client contacts and peers.
• Ability to identify, analyze, and propose creative, unique solutions to problems.
• Ability to undertake short- and long-term planning to provide for efficient and effective scheduling of work assignments.
• Ability to effectively communicate orally and in writing.
• Ability to work well with others.
• Ability to make effective oral presentations to clients.

Minimum years of Experience

More than 5 years related experience preferred.

Required/Preferred Education Requirements

A bachelor’s degree or higher degree in chemical engineering and/or Bachelor’s/master's in health, Safety and Environment related courses

Required/Preferred Professional Requirements

Consequence software experience preferred – E.g. PHAST, FLACS, KFX, InFlux, Fluent

Experience with offshore Formal Safety Assessments preferred.

Senior / Sales Engineer (SEM/COM Dept)

• Salary: $3,000 - $4,000 including allowance [ Can be adjusted depends on experience ]
• Location: Kallang Ave, Aperia Tower
• Working days: Monday to Friday
• Working hours: 830am-530pm (1 hour lunch)

Job Scope [ Products: Semiconductor Devices, Electronic Components ]

• Hunting Sales (new client) & Farming Sales (existing client)
• Demand creation for semiconductor and electric component to customers
• Marketing
• Delivery supporting, FCST management and stock management
• Build up relationship with customers and suppliers
• Reporting (to suppliers)

Requirement

• At least 2 years of B2B sales experience in semiconductor background is preferred

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

ClearSK Healthcare Pte Ltd An international aesthetics clinic chain headquartered in Singapore, with presence in Shanghai, Hangzhou and now Kuala Lumper, is looking for suitable candidates for the above positions. In your role you will have opportunities to work alongside doctors, para-medical and finance professionals. For the motivated candidates, this is opportunity to earn high income but also a chance to learn and grow in your career.

To fit in with our culture of excellence, we look for only the F.I.T.: Fast, Innovative and Trainable as well as commitment, integrity and professional skills

Job Responsibilities:

· Report to Financial Controller who is a qualified CPA / Chartered Accountant

· Execute the company’s inventory policy

· Manage the company’s inventory system including stock profiles and locations

· Churning of necessary daily and weekly Inventory/Purchasing reports

· Ensure incoming goods are receipted and managed appropriately in Finance aspect

· Review historical data to build timely forecasts for assigned markets

· Responsible for planning periodic stock checks via audit work and stock takes

· Perform reconciliation or audit after physical counts and liaise with business units to rectify variance

· Monitor inventory stock -cards and systems to maintain safety stock level to avoid ‘’out-of-stock’’ situations

· Audit check on stock flow accuracy

· Timely update stock movement in physical stock-card and inventory system

· Check on supplier invoices

· Assist in other financial matters

Qualifications and Requirements:

• Minimum Bachelor's degree in Business, Analytics, Accounting, Finance, or a related field
• Good in planning and organizing work flow, with strong in numeracy, analytical and good interpersonal and communication skills
• Enjoy working in fast-paced and dynamic environment independently
• Diligent in checking work to ensure no errors before submitting to superiors for review
• A multi-tasker and learner with self-motivation and sensitive with figures
• Comfortable with computerized data processing and able to comprehend tables and spreadsheet templates
• Diligent in checking work to ensure no errors before submitting to superiors for review
• Familiarity with accounts payable processes and administration
• Exceptional attention to detail and commitment to accuracy

Application process:

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application on MyCareersFuture:

https://forms.gle/hRJVt819mXFCyWXp8

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.

Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

Hands on Experience in Cloud is must

Good knowledge and Work Experience in Networking & Security is must.
Managing of Security devices like Checkpoint and Palo Alto Firewalls.
Knowledge on data center network including Cisco Nexus switches.
Knowledge on load balancer like F5 BIG IP (LTM and GTM).
Managing of Servers; AAA, SNMP, Syslog, NTP, DHCP, FTP, DNS, AAA, DNS and DHCP
Managing of Cisco Routers ISR/ASR Series and Switches Catalyst 6500,4500,3750,2960 & 3560 Series
Significant exposure to 802.1x, TACACS+ and Radius.
Experience in managing Wireless Environment with WLAN Controller.
Responsible for day to day Operations and administration on data center network & security infrastructure.
Perform Installation, configuration and maintenance of network equipment and network operating System
Responsible for security, particularly trouble shooting and/or debugging network related problems.
Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities to  first- and second-level teams.
Perform maintenance of the network authorization infrastructure as well as network backup system.
Maintains inventory of equipment and parts as well as documentation of vendor activates.
Develop and documents systems standards for computer and network device.
Recommend and schedule repairs to the LAN/WAN and ensure timely user notification of maintenance requirements and effects on system availability.
Strong networking background and experience, with the ability to do troubleshooting of both access control and network related problems.
Troubleshoot networks, system, and applications to identify and correct malfunction; other operational difficulties and provide telephone and internal users.
Preferably with one of the given Certification - CCNA/CCNP or a Firewall Certifications.
Ready to work in shifts

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses. We will recommend that you watch this short video with input from our employees around the world.

Logicalis - A Great Place to Work

Job Summary:

We are currently looking for a Senior Security Project Engineer to join our Professional Services Team delivering Security Projects encompassing predominantly NAC, Firewall, PS and MFA solutions. Qualified candidate is expected to have hands-on experience in delivering such solutions. This role presents itself with considerable learning opportunities on the state-of-the art security technologies.

Accountabilities:

· Develop low level design document for the project delivery detailing the scope with the sensible technology write up.

· Participate in Internal/Customer meetings to develop the LLD document.

· In-depth technical knowledge and good working experience in implementing and supporting Cisco ISE and HPE Aruba ClearPass NAC solutions.

· Prepare UAT document and perform UAT as per document.

· Understanding of Windows Active Directory and Integration with NAC Solutions

· Proficient with hands-on experience delivering Firewall migrations and fine-tuning Firewall/IPS policies.

· Ability to deliver MFA Solutions for specific use case requirements.

· Assist in reviewing Technical Design Specifications (TDS) document for security projects

· Proactively participate in maintaining internal knowledgebase sharing technical findings within the Team.

The Individual and their Experience:

· Network Access Control (dot1x) experience of Cisco ISE and HPE Aruba ClearPass (Mandatory).

· Firewall Migration expertise across multi-vendor platforms- Cisco ASA/FTD, Palo Alto, Fortigate, Checkpoint.

· Hands on experience Cisco FirePower NGIPS.

· Basic understanding of Networking – Routing and Switching Protocols.

· Ability to manage medium to large size project and ensure completion within the projected timeline.

· Build customer relationship to manage the projects in a congenial way.

· Team Player highly spirited, sharing project experience with peers.

· Able to learn and adopt new skills when projects warrant based on the relevant training provided.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Job Summary:

· Salary: Basic $4,000 - $7,000 + AWS (Split-into 12 months once joined) + Flexi Benefits $1000 (Prorated)

· Working hours: Monday - Friday (Flexi Hours: 8am - 5pm/ 8.30am - 5.30pm/ 9.00am - 6.00pm/ 9.30am - 6.30pm/ 10.00am - 7.00pm)

· Working location: Woodlands

Job Responsibilities:

· Software sustaining and continuous improvement of current machine’s software.

· Responsible for software feature development and enhancement based on customer requirements.

· Provide supporting and troubleshooting to on-site software issues.

· Review and update the user requirement documents and operation procedures.

· Collaborate with mechanical, electrical, application team to implement new hardware feature or software feature to equipment.

· Develop and enhance software utilities to improve equipment setup and easy operating abilities

Requirements:

· Require BS or MS in Electrical/ Electronic/ Computer Engineering or equivalent.

· Proficient in C, C++ programming with Windows OS.

· Experience in PC-based control programming.

· Able to work independently with good interpersonal, verbal and written communication skills.

· Requires minimum of 3 years relevant experience in software development.

· Strong background in image processing, pattern recognition or machine vision etc.

· Have some machine learning experience with deep learning framework like Pytorch, Tensorflow, Darknet etc.

· Hands-on experience with OpenCV or Cognex CVL will be an added advantage

· Have good teamwork, outstanding communication skills, and willingness to learn.

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret that only shortlisted candidates will be notified.

David Tang
Registration Number: R23115252
EA Licence No: 16C8004 (Elitez Pte Ltd)

Responsibilities:

• Conduct planning, design, load, and fault calculations.
• Perform tender preparation, evaluation, & quality assurance.
• Assists the Manager/Director in testing and commissioning.
• Collaborate with clients, project managers, contractors, and lead projects.
• Generating designs and tender documentation.
• Undertake ad hoc tasks as assigned.

Requirements:

• Bachelor’s Degree in Electrical Engineering
• With 5 years of relevant experience in an M&E Design & Consultancy Industry.
• Knowledgeable with Data Centre.
• Capable of working independently and as part of a team, with strong interpersonal skills.
• Willingness to travel as necessary.

Interested candidates who wish to apply for the advertised position, please click on the APPLY

button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that

we may collect, use or disclose your personal information for purpose in connection with the

services provided by us.

• Lead the Extra-Low Voltage systems design on assigned large scale projects during the tender, design, procurement, construction, commissioning until finale client acceptance phase;
• Design of control systems, instrumentation, cabling and cable support systems for Process equipment, Industrial Facilities and Commercial Buildings, with the support of of Lead Engineer, if necessary;
• Design of Life Safety System comprising of Public Address Systems, Access control, Closed Circuit, Gas Detection and Fire Alarm systems with the support of a Lead Engineer if necessary;
• Design of Information Technology cabling System with the support of a Lead Engineer if necessary;
• Develop P&IDs, Instruments and IO list, Sequence of Operations, Logic Diagrams, Cause and effect matrices with the support of Lead Engineer if necessary;
• Develop / Execute / Expedite ELV packages during design, procurement, construction phase of a project and taking responsibility for the assigned packages;
• Co-ordination and scheduling activities for the ELV supervisors on a project to ensure timely delivery at project milestone dates;
• Interfacing with other trades during design phase and incorporate their requirements into the ELV systems design;
• Technical Evaluation of vendor submission including approval of shop drawings;
• Preparing the procedure for testing and commissioning of individual system and manage subcontractor during commissioning of the Extra Low Voltage systems;
• Guiding ELV engineers / Designer / Draftsman for preparing cable routing plan, hookup drawings, wiring drawings, cable schedule, Junction Box schedule, Instrument Air manifold schedule, Block diagrams, P&IDs, Control System Schematic.

Qualification:

• Degree in Instrumentation and Controls Engineering
• With atleast 6 - 8 years of relevant experience in design, installation, programming, commissioning of Process and Building control systems
• Experience in design, selection, installation, commissioning of Instrumentation for Process and Building control systems
• Experience in Extra Low Voltage Systems such as Fire Alarm, Security systems, IT data network
• Experience in Advanced Technology Facilities, Life Science & Chemicals, Energy & Environment Technologies, High Tech Infrastructure, Process Automation, Products and Services.

Job Responsibilities:

• Participate in designing solutions that meet functional requirements
• Implement end-to-end specifications for solution components
• Generate relevant documents and reports
• Perform testing and implementation of solutions
• Participate in UX activities such as creating wireframes/storyboards, conducting user research/interviews and developing user stories, storyboards
• Contribute to the SDLC in the areas of coding tools, languages, and software designs

Job Requirements:

• Min Diploma/Degree in Computer Science or any IT-related field
• Familiarity in any of the programming languages: C, C++, C#, Java, JavaScript, Python
• Proficient in Web Technologies like HTML, CSS
• Excellent working attitude and a strong team player

(EA Reg No: 20C0312)

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

Responsible for the execution of geotechnical designs involving the preparation of calculations and reviewing of geotechnical design drawings in accordance to customers' specifications, applicable codes and standards.

Job description:

• Ensure quality and accuracy of designs
• Produce sketch drawings
• Carry out design calculations
• Ensure compliance with project Design Criteria/Client Brief/ Approved Concept
• Check documentation complies with design
• Attend design, clients, architects and site meetings
• Ensure compliance with ISO Quality Procedure Manual
• Ensure design output sustains continuity of drafting program.

Job requirements:

• Preferably 2 years experience in geotechnical design in a consultancy company
• Candidate must possess a Bachelor's or Master's Degree in Geotechnical or Civil Engineering

We are seeking consultant engineers who are experienced in the design commercial buildings, major infrastructure transportation projects and mixed-use developments specifically focusing on the fields of mechanical engineering and building services.

Responsibilities

Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations to as part of the engineering project team
- QA/QC documentation review of engineering deliverables- Liaison with clients, project managers, architects, contractors, cross disciplinary engineers as required to carry out the works

- Resolve any technical problems faced during project design and/or construction stages

- Other ad-hoc duties that are required

Minimum Qualifications/ Experience- Tertiary qualification in a relevant engineering field with minimum 5+ years of related working experience in consulting engineering role

- Engineering design of commercial buildings, major infrastructure transportation projects and mixed-use developments

- Candidates must have design experience and good understanding in the following technical systems and procedures:- Potable and non-potable- Water supply and distribution systems including plumbing, domestic hot and cold water, flushing water,- irrigation, water and rainwater, and sewer/wastewater- Drainage including sewer and roof drainage- Rainwater harvesting systems- Solar heating systems- Water and drainage Infrastructure design- All associated load and sizing calculations and equipment selections such as pumps, filters, tanks, pipes etc.Develop, design through establishing, design briefs, design reports, calculations, schematics, schedules, specifications
Developing Concept, Preliminary, Detailed and Construction Engineering Designs
Productions of drawings and developing models
Appreciation of the requirements for maintainability of systems
Appreciation of the requirements for commissioning of systems
Appreciation of the requirements for Automatic Control of systems
Experience of Value Management and Value Engineering
Design Issues Management
Design Risk Management
Evidence of continuing professional development
Skills- Good interpersonal and communication skills- Strong technical and engineering skills with the ability to develop engineering approaches and technical standards/policies- Good Design Management including prioritization of work- Decision making skills- Proactive issue resolution- Producing high quality work to agreed timescales- Enthusiasm for innovation and initiating change- Personal commitment to maintaining a high level of ESH performances at the workplace and in the project environment- Ability to build and improve effective internal/external working relationships

Knowledge- Safety in design principles and approaches- Knowledge of Engineering Design Codes and standards to include ASME, BSI, ISO, IEE, ASHRAE, ASRE, LEED, ASTM, ANSI, IBC, IMC, CIPSE- Following standards and regulations would be an advantage ACI, IATA, ICAO, GCAA- Understanding of Environmentally Sustainable Design principles- Understanding of the principles of low energy design- Knowledge of project management and scheduling would be advantageous- A broad understanding of building/construction/facility issues and the associated safety and environmental implications- General awareness of legal requirements for safety & health and of national standard for quality (e.g. ISO9001) Understanding of BIM LODs and digital delivery- Highly IT competent with experience of using Microsoft 365 packages, AutoCAD, Revit, NavisWorks, BIM 360 etc.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 4 years of work experience in the digital backend design field.

1. Hands-on project experience is required.

2. Tapeout experience at advanced technology is prefered.

3. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

We invite you to write in to Kevin at [email protected] , with your updated CV (in MSWord format). We regret to inform only selected candidates will be notified. However, if you are not selected, we will keep your CV and contact you for suitable role(s) that comes along.

Kevin Chong

WA: +65-62957159

EA Reg No. R1109670

EA License No. 22S1412

Job Role

HD Admin Support

Contract Period: (June 2024 to Nov 2024)

Work Location - 81 Kim keat Road (NKF HQ)

Main Responsibilities

• Process HD Admission documents
• Data entry for HD applications
• Scheduling of clinic and orientation appointments
• Ensure patients’ database is updated in a timely manner
• Assisting in the operations of Admission Clinic and Patient Orientation
• Generating and validating of basic reports
• Prepare letters via system or MS words for mailing
• Scanning and printing of office documents
• Ensure files are kept in order
• Contribute and ensure that the department meet its KPIs
• Ad-hoc administrative duties

Qualification (Related Field)

• At least a Diploma and/or with relevant working experience

Experience

• Preferably experience in healthcare industry

Soft Skills

• Team player
• IT savvy
• Able to work independently.
• Fluent in Mandarin or Malay as the role involves direct communication with our patients.
• Comfortable to work with patients.

Senior Deskside Support Engineer (VIP Support)

We are looking for experienced full-time senior deskside engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Providing level 2 End User Computing support for VIP users both onsite and remote
• Well verse in Windows OS and MS office applications.
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for MAC, IOS, and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• With more than 6 years of IT deskside support and solid experiences in providing VIP support both onsite and remote
• A good team player.
• Confidence with excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written English communication skills and ability to interact with other teams.

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Responsibilities:

• Conduct planning, design, load, and fault calculations.
• Perform tender preparation, evaluation, & quality assurance.
• Assists the Manager/Director in testing and commissioning.
• Collaborate with clients, project managers, contractors, and lead projects.
• Generating designs and tender documentation.
• Undertake ad hoc tasks as assigned.

Requirements:

• Bachelor’s Degree in Electrical Engineering
• With 5 years of relevant experience in an M&E Design & Consultancy Industry.
• Knowledgeable with Data Centre.
• Capable of working independently and as part of a team, with strong interpersonal skills.
• Willingness to travel as necessary.

Interested candidates who wish to apply for the advertised position, please click on the APPLY

button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that

we may collect, use or disclose your personal information for purpose in connection with the

services provided by us.

· Perform work assigned by Office Leader on both local and international projects.

· Communicate on daily basis with Electrical Team Lead for technical discussion in design development.

· Familiar with the following services: ELECTRICAL/LIGHTNING PROTECTION/ELV

· Prepare design drawings including Schematics (AutoCAD) and layouts to the required company standard.

· Coordination of the design and interface with other disciplines taking advantages of 3D tools

· Perform engineering software calculation

· Perform Quality Assurance check on assigned task

.REQUIREMENT

· Degree in Electrical Engineering or equivalent

· Minimum 2-5 years of experience .

· Ability to communicate well in English, and effective Team Player

· Ability to operate CAD· Basic skill in Revit will be an added advantage

· Familiar with local codes.. Experience working in Design and Drafting in Consulting Engineering firms.

Duties:

• To support in developing project deliverables as per project & client requirement.

• Prepare responses to client queries.

• Prepare & Review of company development work methodology / procedures.

• Develop Supplier call out plan in consultation with commissioning leads and work closely with Supplier callout Coordinator to manage the supplier callout process during execution phase.

• Develop mobilization plan for discipline technicians following project execution plan.

• Develop required specification and Coordinate for set up of contract for commissioning support services i.e., Integrity Leak test / Oil flushing services, Technician Manpower supply, temporaries (Load Bank, Temp Generators, steam blow etc).

• Coordinating with Commissioning leads to preparing a list of temporary materials and testing equipment’s, tools, consumables and process procurement of such items.

• Coordinate with planner to create commissioning WBS codes/activities/duration within project schedule using system / sub-system definition.

• Input system interdependency (logic link) with in Project Schedule

• Input commissioning man hrs with in Project Schedule

• Integrate construction milestones, commissioning sequence, and project completion targets and provide master project schedule for use by site execution team.

Qualifications

• Bachelor's Degree in Engineering with 8 to 14 years' work experience (or) Master's Degree in Engineering with 6 to 12 years' work experience with minimum of 5 years' work experience in onshore/offshore Oil & Gas area or FPSO line(s). Also Diploma in Engineering with 11 to 17 years work experience (making the equivalent to degree) can also be considered

• Ability to define concepts of completion process.

• Experience in developing required technical specification and Coordinate for set up of contract for various support services required during commissioning i.e., Integrity Leak test / Oil flushing services, Technician Manpower supply, temporaries (Load Bank, Temp Generators, Steam blow etc).

• Has work experience in setting up an effective, objective oriented, and user-friendly commissioning execution plan / schedule for the successful Commissioning of any FPSO project

• Work experience within strict regulatory environments and aligning commissioning independence with engineering compliance and contractual requirements.

• Familiar in use of Software, Database systems related to System Completion, Project Management (MS Project / P6) and General computer literacy (MS office).

The incumbent will specifically be responsible for:

• Set design criteria, check design calculation and drawings;
• Assist in preparing fee proposals;
• Project invoicing;
• Carry out feasibilitiy work;
• Advise and report to the Team Leader and Division Manager, on the adequacy of the services;
• Formalize standards for specifications, drawings etc. in conjuction with Team Leaders and the Division Manager;
• Resolve any technical problems faced during the project design and/or construction stages;
• Investigate and recommend on engineering system selection;
• Handle all corespondences including reports, technical specifications, and other documents relating to the projects;
• Prepare and monitoring cost and quantity estimates;
• Attend design / site meetings;
• Assist Team Leader in internal staff management;
• Assist in business development activities;
• Senior engineers must be able to lead projects an team of engineers / technicians under their charge;
• Senior engineers must become fully familiar with coded and local Authority requirement;
• Other duties and responsibilities as reasonably required by the Team Leader / Division Manager.

The role holder must have extensive design knowledge and experience for building projects in an engineering consultancy firm.

An ideal candidate should possess the following qualifications:

• Recognised Bachelor degree or equivalent in Electrical Engineering;
• Must have design experience in electrical services in residential, commercial or mixed development projects;
• Registered PE in Singapore will be favourably considered;
• Experience with project management would be an advantage

Our client is a Global Manufacturing MNC. Due to their current expansion plan, they are looking for a Senior Automation Engineer (PLC) to join their team, in hopes of developing the current high performing team. They are located in the North.

Job Responsibilities:

• Develop, cost, and implement mechanical, electronic, and digital processes to enhance efficiency and increase yield of the organisation, from idea to pilot phase.
• Provide guidance on Smart Automation and Industry 4.0 initiatives.
• Establish process monitoring plans for consistent operations.
• Provide timely support to Operations and Quality Assurance teams, from pilot to production phase.
• Collaborate with partners to improve overall organisation’s capabilities.
• Any other duties as assigned.

Requirements:

• Minimum Bachelor or Master in Engineering relevant equivalent field of study.
• Minimum 5 years relevant experience.
• Knowledgeable/experience in CAD/CAM would be advantageous.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Senior / Procurement Engineer (Electrical/Electronics)

Responsibilities

• Accountable for supplier selection and strategies alliance
• Develop and manage relationship with all key suppliers
• Conduct regular review on supplier’s quality and cost reduction target
• Develop and implement vendor managed inventory program
• Liaise with suppliers on all quality issues
• Lead procurement activities in product transfer and new product introduction
• Liaise with suppliers on quality improvement program
• Drive continuous process improvement by measuring and analysing suppliers and process efficiency
• Develop and implement cost reduction activities
• Liaise with the necessary internal and external parties on the disposal of non-conforming materials

Requirements

• Min Diploma in Electronics Engineering
• Minimum 3 Years’ work experience in Electronics industry (High mix, low volume manufacturing environment)
• Excellent negotiation and supplier management skills
• Have experience in leading new product introduction
• SAP R/3 or HANA

Interested applicants please submit your resume to [email protected]

Job Description & Requirements

Duties & Responsibilities

• Assist the Team Leader and Job Captain in the performance of their duties
• Supervise the other design drafting team
• Ensure quality and accuracy of designs
• Ensure compliance with project Design Criteria/Client Brief/Approved Concept
• Ensure compliance with relevant design standards and office standards
• Attend and participate in design meetings
• Ensure compliance with ISO Quality Procedure Manual

Requirements

• A bachelor’s degree in mechanical engineering recognised by Professional Engineers Board.
• Entry level with some consultancy internship experience are welcome to apply
• 1-2 years of design experience in consultancy firm would be advantageous
• Must have prior hands-on design experience in the design of ACMV, Fire and Hydraulic services for large scale building projects
• Experience in Rail and infrastructure projects and data centre an advantage

Additional Requirements:

• Good interpersonal and communication skills
• Must be fully familiar with local and international codes
• Hands-on experience with relevant engineering software and BIM
• Must be able to work independently
• Must have a good understanding of unit costs of the MEP services in various types of projects

Responsible for the execution of geotechnical designs involving the preparation of calculations and reviewing of geotechnical design drawings in accordance to customers' specifications, applicable codes and standards.

Job description:

• Ensure quality and accuracy of designs
• Produce sketch drawings
• Carry out design calculations
• Ensure compliance with project Design Criteria/Client Brief/ Approved Concept
• Check documentation complies with design
• Attend design, clients, architects and site meetings
• Ensure compliance with ISO Quality Procedure Manual
• Ensure design output sustains continuity of drafting program.

Job requirements:

• Preferably 4 years experience in geotechnical design in a consultancy company
• Candidate must possess a Bachelor's or Master's Degree in Geotechnical or Civil Engineering

Requirements

• Recognised Bachelor's or Masters degree in Mechanical Engineering
• At least 5 years of design experience in an engineering consultancy firm
• Must have design experience in Air-Conditioning and Mechanical Ventilation system in hospital, residential, commercial or mixed development projects
• Registered PE will be favourably considered

Responsibilities

• Produce sketch drawings, set design criteria, check design calculation and drawings
• Ensure documentation complies with Design Criteria / Client Brief / Approved Concept / Standards
• Has Client facing experience to attend design, clients, architects and site meetings
• Resolve technical problems during the project design and construction stages
• Lead projects and have the ability to take on Job Captain role

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

GET INVOLVED IN THE FIGHT TO ADAPT TO CLIMATE CHANGE.

We monitor the marine environment and run climate change simulations.

We're looking for fullstack software engineers with devops and Linux expertise to help develop applications that maintain, process and visualise data and numerical models.

Duties and Responsibilities

Develop fullstack applications (50%);

Perform devops and sysadmin functions for Windows and Linux/Unix (50%)

Qualifications

• Bachelor's degree or equivalent in any discipline.
• Experienced in devops and developing fullstack software applications using software like: QGIS, Django, Flask, Spring Boot, Node.js, AngularJS, Express, LeafletJS, ReactJS, VueJS, GeoServer, ArcGIS Server, Ansible, postgresql/postgis.
• Experienced in today's web application technologies, web infrastructure (software and hardware) and the devops process.
• Strong in the following: Linux, Windows, Javascript, Java, C++, Python, SQL, bash scripts.
• Experienced in backend software like Apache, NGINX, MySQL, PostGreSQL, MSSQL, Oracle, etc.
• Experienced in git and CI/CD (e.g. Jenkins, Gitlab, etc).
• Able to administer Linux and Windows.
• Good oral and written English communication skills.
• Promising candidates will enjoy renewed contracts.