Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

- To provide Desktop Windows upgrade from 10 to 11 (migration) and test of GPO Policy on Windows 11.

- Work with Desktop Team

-Atleast with 1 year experience is required in Migration and Upgradation

-Office hours

- To provide Desktop Windows upgrade from 10 to 11 (migration) and test of GPO Policy on Windows 11.

- Work with Desktop Team

-Atleast with 1 year experience is required in Migration and Upgradation

-Office hours

1. JOB DESCRIPTION

Job Title

Assistant Production Engineer

Job Description & Requirements

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Cconstruction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

Responsibilities

• To report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.
• To assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
• To prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• To supervise the execution of the construction works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract documents.
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• To liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist Contract department (QS) in verifying progress payments and claims from Contractors.
• To attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule.
• To establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.
• Any other duties that may be assigned from time to time.

Requirements

• Degree in Civil Engineering or equivalent with 3 to 5 years of working experience in the construction industry.
• Good Time management and organization skills;
• Good interpersonal and communication skill;
• Able to multitask;
• Able to work under fast paced environment;
• Located at Changi Airport site office.

Responsibilities:

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades eg M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural/Civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements:

• Diploma or Degree in Civil/Structural Engineering / Building
• minimum 5 years structural coordinator experience
• Good knowledge of Structural specifications & requirements

System Engineer (West Area)

Occupation

SENIOR INFORMATION SYSTEM ENGINEER

Job Description & Requirements

Job brief

System Network Engineer who is able to maintain, upgrade and manage server system hardware and networks and in-house development environment software applications.

Resourcefulness is a necessary skill in this role. The candidate should be able to diagnose and resolve problems quickly. He/she should also have the patience to communicate with a variety of interdisciplinary teams and users.

Candidate must be able to perform routine rotation standby technical support to customer call and travel to customer site during silent hour (after working hours) to resolve operation issue.

Responsibilities

· Install and configure software and hardware

· Manage network devices and technology tools

· Ability to understand overall system network architecture

· Monitor performance and maintain systems according to requirements

· Troubleshoot issues and outages

· Ensure security through access controls, backups and firewalls

· Upgrade systems with new releases and models

· Generate and maintain technical documentation, manuals and IT policies

Requirements

· Proven experience as a System Engineer/Administrator, Network Administrator or similar role

· Experience and knowledge in VMware and SAN

· Experience with databases, networks (LAN, WAN) and patch management

· Knowledge of system security (e.g. intrusion detection systems), OS hardening and data backup/recovery

· Familiarity with various operating systems and platforms (MS Windows and Red Hat preferred)

· Resourcefulness and problem-solving aptitude

· Diploma in Information Technology, Computer Science or a related discipline; professional certification (e.g. Microsoft Certified Systems Administrator (MCSA)) is a plus

Diploma holder with minimum 5-year of relevant experience preferred

5 day week @ West Area

Maestro HR

damien lee tian hong

R1106726

16C8462

Why Join Us?

• Attractive Newcomer Bonus
• Saturday work allowance
• Career Progression & Development Opportunities
• Opportunity to Work Alongside an Innovative Team
• Comprehensive Leave Packages (e.g: additional leave, birthday leave, eldercare leave, marriage leave & gift, etc...)
• Annual Executive Health Screening

Job Responsibilities:

• Develop, maintain and manage working relationships with clients and all related parties.
• Manage and implement overall project.
• Coordinate with Project Manager on project matters
• Supervise and provide advice to junior Project Engineer(s)
• Check working drawing, identify discrepancies for resolution
• Keeping track on variation and claims of contract
• Perform project cost review on a regular basis and on identified areas.
• Plan and manage project schedule to ensure timely delivery.
• Perform incoming inspection on project materials delivered on site by suppliers or vendors.
• Site coordination with subcontractors, supervisors and clients.
• Ad-hoc duties as assigned by superior(s).

Job Requirements:

• Degree in Civil & Structural Engineering (Certificates must be recognized by PE Board).
• Minimum 3-5 years of experience in infrastructure projects, e.g. roads and rail projects
• Possess skills, knowledge and ability to supervise and manage project effectively
• Independent, resulted-oriented and self-driven team player with good communication skills
• Class 3 driving license will be added advantage
• Salary package commensurate with experience

Our client, an established EPC contractor in the Oil & Gas/Petrochemical Industry, is seeking for a Senior Civil & Structural Engineer to join their team.

Job Responsibilities:

• To lead the Engineer team to carry out civil and structural engineering jobs in front end engineering design, detail engineering design.
• To assist discipline Manager in project civil portion manpower.
• To generate project specifications, design philosophy, calculation template to comply with clients’ requirement and local authority’s requirements.
• Civil project team manhour control, schedule control.
• To prepare foundation, structural or hydraulic calculation sheets, from simple to more complicated items, in accordance to project specifications, criteria and information. Ensuring correct and accurate calculations of loads and member sizes of structures. On average, a Civil Engineer II produces three simple foundation calculation designs a day, or 1 structural calculation report a week.
• To prepare three-dimensional (3D) models and design drawings for structures and foundations as well as shop fabrication drawings.
• To supply design drawing information and instructions to Designers ensuring technical completeness and clearness of data for effective workflow.
• Usually prepares anchor bolt list and set bolt list for client’s procurement purposes ensuring at least (+)/ (-) 10% safety factor and meeting client requirements.
• Checks own design outputs and reviews design drawings to ensure accuracy and completeness to design requirements and concepts.
• May act as Assistant Key Person for small projects or NIDC projects.
• Coordinates with other Engineers and Designers to facilitate production of civil design and drawing outputs.
• Performs other functions that may be assigned by the Department Manager.

Job Requirements:

• Bachelor’s degree in civil engineering.
• Minimum of ten (10) years in the field of years plant engineering design and construction experience in Oil & Gas, Refinery, Petrochemical, Chemical, Pharmaceutical and industrial plants and consistent career experience in the engineering department
• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Basic knowledge on STAAD, AutoCAD and Micro station.
• Possess good communication and technical skills
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyze, and interpret common technical information, contract reports and instructions.

Interested applicants, please click "APPLY NOW" or send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Kalaivani D/O S. Arumugam | EA Reg No: R2196515

Responsibilities:

• Architect and implement scalable control and navigation solutions for AMRs utilizing your expertise in ROS, C++, and Python. Your focus will be on robustness, efficiency, and adaptability in real-world environments.
• Evaluate and integrate third-party systems (HW/SW) to enhance KABAM robots' capabilities.
• Conduct rigorous field tests to validate the reliability and performance of navigation systems in diverse outdoor conditions. Leverage insights gained to iteratively improve and optimize navigation algorithms, incorporating SLAM, motion planning, and perception techniques.
• Maintain comprehensive documentation of design, development, and deployment processes. Foster a culture of knowledge sharing within the team by presenting insights and lessons learned in regular sessions.
• Provide expert support for remote robot deployments at customer sites worldwide. Your troubleshooting skills and hands-on assistance will ensure seamless integration and operation of our solutions.
• Stay abreast of the latest advancements in robotics technology. Engage in continuous R&D efforts to explore new methodologies and technologies that can elevate the capabilities and performance of our AMRs. Implement findings to enhance existing systems and processes, keeping KABAM at the forefront of technological innovation.

Requirements:

• Education – Bachelors or Masters in Computer Science/Electrical Engineering/Mechanical Engineering with a focus in robotics, mechatronics, or related fields
• Experience – Bachelors (with at least 3 years relevant experience) or Masters (with at least 1 years relevant work experience)
• Industry – Previous experience in a robotics company preferred
• Supervisory – Personnel management is nice to have. Project management/technical lead experience is preferred
• Language – English (required), Mandarin (desirable)
• Technology – C++/Python, Linux, git, ROS; SLAM, motion planning, or perception techniques
• Coordinating the Work and Activities of Others — Yes
• Guiding, Directing, and Motivating — Yes
• Making Decisions and Solving Problems — Yes

Job Responsibilities

1. Responsible for the development and maintenance of the company website.

2. Responsible for the development and maintenance of hybrid pages for the company’s app.

3. Responsible for the development of operational activities.

4. Development and maintenance of the component library.

5. Optimization of system performance.

Job Requirements

1. Bachelor's degree or higher in Computer Science or related fields, with over 2 years of front-end development experience.

2. Proficient in CSS, JS, HTML, etc., with the ability to independently complete page development.

3. At least proficient in one mainstream front-end framework, such as React or Vue; familiarity with React is preferred.

4. Familiar with Web application system development, with some understanding of the HTTP protocol and web servers.

5. Proficient in front-end engineering build tools, with experience in at least one large-scale project.

6. Strong interest and in-depth insights into the latest front-end technologies and implementations in the industry.

Responsibilities:

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades such M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural/Civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements:

• Min Diploma in Civil/Structural Engineering / Building
• Min 5 years structural coordinator experience
• Good knowledge of structural specifications & requirements

Job Description

• Lead and manage the electrical engineering design works.
• Prepare and review the design of the electrical works, e.g. equipment sizing, cable sizing and voltage drop calculation, power system study, electrical layout single line diagram, schematic drawings, etc.
• Handle equipment packages and procurement including technical specifications, technical clarification, technical bid analysis, etc.
• Develop cost estimates for electrical equipment and electrical works.
• Develop work schedule and coordination of the project works.
• Review the sub-consultants, sub-contractors and vendors' design and submission, ensuring all project specifications and design standard are met.
• Prepare all relevant checklists for installation, testing and commission works.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages, sub-contractors, and vendors.
• Attending to client's comments and ensuring client's approval and acceptance of all electrical works related design, installation, testing and commissioning works.
• Handle and resolve all site technical related matters.

Requirements

• Bachelor Degree in Electrical Engineering
• 5 to 8 years of relevant experience in construction industry. Working experience in water or wastewater industry will be an advantage.
• Experience in design, installation, testing and commissioning of electrical works, e.g. high voltage system, low voltage system, transformers, motor starters, cabling works, earthing and lightning protection system, etc.
• Experience in project execution, project coordination, supervision and coordination
  with clients, consultants, and all other sub-tier under the Contractor.
• Good technical knowledge in electrical system.
• Well verse in power system analysis software e.g. ETAP and BIM software e.g. Bentley, Revit and Navisworks.
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• Will be required to work full time at project site.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Construction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

Job Scope of Engineering / Technical Sales Engineer

1. Working together with sales team to maintain or excel (but not constrainted to) a minimum monthly sales target of S$100,000. (As a good guide for fluctuating monthly sales, the figure may be calculated base on a three month average).
2. To help in the servicing of customers in terms of conceptualizing of machine processes, writing up of proposals and quotations.
3. Help PM (Project Manager) in the planning of capacity to ensure timeline is being met. This is done with the help of a Master Project Schedule.
4. Coordinate with internal and external designers on the customer requirements to ensure customer needs are met.
5. Project monitoring to ensure timely delivery of goods.
6. To be involved in the process of new business development in new areas of industries.
7. Involved in public relations taking care of overseas partners and customers.

Requirements

1. With at least 3 years experience in Manufacturing Automation Machines. Knowledge in CAD software and common Miscrosoft software is required.
2. Educational qualifications: Diploma (or higher) in any discipline. Those with related experience may apply.
3. Self-motivated, objective driven. Multi-skill and multi-tasking required. Independent, self-initiative and creative.
4. Good interpersonal communication skills required (English and Mandarin).
5. Able to work well with others in terms of commitment, interests and adopting positive attitude.
6. Frequent traveling may be required.
7. Class 3 driving license added advantage
8. Willingness and flexibility are added good pre-requisites
9. Preferably to possess own vehicle (car allowances provided)

Job Responsibilities

As part of our efforts to change and unify the way Castlery collaborates as an organisation, we are currently looking for a Senior System Engineer to join us in helping to develop our Netsuite ERP system which will serve multiple departments (Finance, Logistics, Supply Chain, etc.). Your job responsibilities as our System Engineer are as per below.

• Work with technology teams to develop well-integrated and high-performance solutions.
• Bring latest product features to the systems and advise the most appropriate uses of them.
• Work with our development teams to create new features in NetSuite and integrating with our other ERP software.
• Constantly improve processes and systems to drive efficient workflows.
• Troubleshoot issues and provide hands-on support to system users.
• Create and maintain documentations for both business and technical details.
• Be the ‘Go-To’ expert and drive workplace productivity in Castlery.

Requirements

• Bachelor’s Degree in Computer Science, Information Technology, Computer Engineering or its equivalent.
• At least 3~5 Years' of experience with NetSuite Developer tools and/or working experience as a System Engineer, Software Engineer, Product Engineer or its equivalent.
• Strong command of JavaScript & SQL.
• Good knowledge of REST services and API design.
• Passion and curiosity for solving challenging problems by leveraging on the right technology.
• Ability to work collaboratively in a multi-cultural team environment and lead changes.
• Ability to work effectively with people at all levels in an organization.
• Ability to deliver sophisticated ideas effectively, both verbally and in writing, in English.

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel extensively (approximately 10 months per year) to China and Vietnam. Travel includes four round-trip tickets to Singapore annually, with separate living arrangements provided.

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

About the Company:

Dbiz is a high-performing product and engineering company that partners with organizations to build out digital solutions using the right technology at the right time. We pride ourselves on our innovative use of technology in various ways.

Role Summary:

We are seeking a talented and experienced Senior Outsystems Developer to join our dynamic team. The ideal candidate will have a strong background in developing and implementing solutions using the Outsystems platform, with proficiency in .NET, SQL, and JavaScript. This role involves designing, developing, and optimizing applications to meet business needs effectively.

Key Responsibilities:

• Design, develop, and maintain applications using the Outsystems platform.
• Utilize .NET, SQL, and JavaScript to create robust and scalable solutions.
• Collaborate with business stakeholders to understand requirements and translate them into technical solutions.
• Implement best practices in coding and application development.
• Troubleshoot and resolve application issues, ensuring optimal performance and user experience.
• Perform code reviews and provide mentorship to junior developers.
• Stay current with Outsystems updates and emerging technologies to continuously enhance skills and knowledge.
• Ensure adherence to project timelines and deliver high-quality solutions within deadlines.

Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 2+ years of professional experience in software development with a focus on Outsystems, .NET, SQL, and JavaScript.
• Proven experience in developing and deploying applications using the Outsystems platform.
• Strong proficiency in the .NET framework and associated technologies.
• Extensive experience with SQL databases and writing complex queries.
• Advanced knowledge of JavaScript and its frameworks/libraries.
• Excellent problem-solving skills and attention to detail.
• Strong communication skills and ability to work collaboratively in a team environment.
• Experience in agile development methodologies is a plus.

Preferred Skills:

• Certifications in Outsystems or related technologies.
• Experience with the integration of Outsystems with other systems and APIs.
• Knowledge of cloud platforms and DevOps practices.

Life at Dbiz:

• Competitive salary and attractive benefits
• Dynamic and innovative work environment
• Opportunities for personal growth and development
• Engaging and collaborative company culture

Role Responsibilities

• Perform on-prem and cloud system management in Microsoft, Virtual (VMWare or Hyper-V), Azure and Microsoft 365 cloud infrastructure such as Exchange Online,SharePoint, Teams, etc
• Participate in design, system set-up and configuration, implementation and deployment of new server and Azure/AWS Cloud Technologies
• Maintains hardware, software and network firewalls and encryption protocols.
• Administers cybersecurity policies to control physical and virtual access to systems.
• Performs network security audits and testing and evaluates system security configurations to ensure efficacy and compliance with policies and procedures.
• Maintaining and supporting ISO/IEC27001 activities
• Responds to cybersecurity breaches, identifies intrusions and isolates, blocks and removes unauthorized access.

Requirements / Qualification

• Possess a Degree/Diploma in IT or equivalent
• Experience in leveraging industry standards and frameworks such as ISO/IEC 27001
• Hands-on experience on administrating Microsoft 365 cloud technologies such as Exchange Online, SharePoint Online, Microsoft Defender and Microsoft Intune
• Hand-on experience with implementing and configuring Azure/AWS cloud technologies such as virtual machines, application services, load balancer, SQL Managed Instance, site to site VPN, storage solutions, network, security, logging and monitoring
• Working knowledge in one or more security and privacy domains such as: security governance policies and procedures, risk management, compliance, access control, network

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering recognised by PEB
• At least 8 years of civil engineering experience, of which 5 years must be of Geotechnical such as tunnels,deep excavation and foundation, including works such as installation of monitoring instruments and collation of monitoring data
• Possessed a valid RE Cert

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub). The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. She/He will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. She/He may also be called upon to advise other developers on integration standards.

Responsibilities:

• You’ll be involved in the development, design, build, testing, and go live phases of multiple integration projects.
• This includes scripting to conform / transform to another systems specifications.
• You will also work with internal teams to continuously improve processes and procedures around deployment of interoperability products that communicate in HIT standards-based formats such as HL7, IHE Profiles, Direct, or SMART on FHIR.
• The Integration Engineer oversees the development of new interfaces and maintain the sandbox environment up to date for application testing.

Requirements:

• Bachelor’s degree in information systems, Computer Science, Engineering, Computer Information Systems, Management Information Systems, or equivalent experience
• 5+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)
• Experience with SQL and relational databases, and communication using secure protocols.
• Ability to work in a team environment alongside developers and deployment teams.
• Utilise engines like Mirth Connect or Rhapsody to have a standard way of integration using both HL7 and DICOM
• Knowledge in developing and configuring Context Launch requirements according to AES 256 standards.
• Assess and customise integrations (HL7 / FHIR / DICOM) based on the project to specific workflow.
• Experience with cloud deployments and/or pipelines, especially Pivotal Cloud Foundry
• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system.
• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)
• Experience integrating with Singapore public hospital technical stack and working with Synapxe are a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Roles & Responsibilities:

• Develop detailed construction schedules to ensure timely project completion.
• Prepare method of statements and risk assessments for construction activities.
• Coordinate effectively with clients and subcontractors, ensuring smooth working and inspection procedures.
• Participate in stakeholder meetings to provide updates on project progress.
• Generate, oversee, and manage project reports, meetings, and essential documentation.
• Address technical and engineering challenges to facilitate smooth project execution.
• Ensure adherence to quality, environmental, health, and safety standards.
• Be willing to work extra hours, including weekends during peak periods, to meet construction schedules.

Qualifications and Experience:

• Degree in Civil Engineering or an equivalent qualification.
• Minimum of 2 years of relevant experience as a Civil/Site Engineer.
• Preferably have some exposure to LTA infrastructure projects.
• Demonstrated expertise in foundation, structural, ERSS, and viaduct projects.
• Proficient in Microsoft Office and AutoCAD for project documentation.
• Preferably possess certifications such as CSCPM, BCSS, Confined Space, or WAH.

Job Summary:

As an Electrical and Electronic Engineer, you will be responsible for designing, developing, testing, and maintaining electrical systems and electronic equipment. This includes working on components such as circuits, microprocessors, sensors, power generation and distribution systems, and control systems, applying your technical expertise to meet the needs of clients, manufacturers, or specific industries.

Key Responsibilities:

• Designing electrical circuits and systems.
• Creating schematics and layouts.
• Selecting appropriate components and materials.
• Conducting electrical tests and simulations.
• Ensuring designs comply with regulatory standards.
• Collaborating with other engineers to integrate electrical and electronics systems into products.
• Troubleshooting and resolving design issues.
• Preparing technical documentation and reports.
• Managing and maintaining design files and databases.
• Staying current with advancements in electrical and electronics engineering and technology.
• Performing any other tasks assigned.
  

Key Skills & Qualifications:

Education: Bachelor's degree in Electrical Engineering, Electronic Engineering, Mechatronics, or a related field. A Master's degree or higher is often preferred for senior roles.

Technical Skills:

• Proficiency with electrical engineering software (e.g., AutoCAD, MATLAB, LabVIEW, PSpice, etc.).
• Solid understanding of circuit design, PCB layout, and embedded systems.
• Experience with power electronics, automation, and control systems.
• Familiarity with microprocessors, sensors, IoT devices, and communication protocols (e.g., Bluetooth, Wi-Fi, SPI, I2C).
• Understanding of signal processing, analog and digital electronics.
• Problem-Solving & Analytical Skills:Strong troubleshooting and analytical skills to identify and resolve complex electrical and electronic issues.
• Soft Skills:Excellent communication skills for documentation and reporting, as well as client interaction.
• Ability to work collaboratively in team environments, especially in cross-disciplinary teams.
• Strong time management and organizational skills

• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,