Total 62,230 Others/Any technical engineer job vacancies in Singapore

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.
• We are looking for people who
• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Research & Development (R&D), Post Market Surveillance, and Global Regulatory Affairs (RA) Teams

Reports to: Senior Manager QA R&D

Function: Global QA & Compliance Organization

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible to ensure that products meet quality goals and regulatory requirements, including but not limited to FDA Regulations, ISO 13485, EU MDR requirements, and Risk Management per ISO 14971 and maintain compliance of the Quality Management System (QMS).

Duties and Responsibilities

• Partner with R&D teams in the USA, Japan, and Singapore to ensure that design control is completed in accordance with procedures, WI, regulatory requirements, and assure that required outputs have been completed
• Execute risk management for devices, processes, and provide the assessment results from product development through to the launch
• Maintain and update risk management files with Global R&D/Manufacturing Engineering (ME) teams to support product development (Risk Management Plans, Risk Control Log, Benefit Risk Assessment Risk Management Report, xFMEA, etc.), and act as the Risk Management expert
• Assist in the review and approval of design development plans, verification and validation protocols, reports, master V&V plans and reports, and design transfer
• Review and approve design verification test protocols, reports and data from a logical point of view (Compliance, rationale, objectiveness and statistics)
• Partner within Quality and R&D to ensure design control documentation (Risk Management, Traceability/Linkages) & design change control requirements are met
• Review and approve biocompatibility protocols and reports
• Ensure compliance of IQ, OQ, tests method validation, Standard Operating procedures and work instructions regarding product development
• Maintain compliance to QMS procedures of the R&D Singapore site, and support the Singapore R&D Site - QA
• Support External audits by competent authorities and notified bodies
• Support internal audits at the local site, and other sites as required
• Review and approve other quality documents (e.g., IQ, OQ, PQ, WI, etc) within areas of responsibility
• Propose and execute quality/process improvements. Write/review policies/ processes/ procedures and related documents
• Manage and monitor the progress of the calibration and maintenance of testing equipment. Ensure calibration or maintenance records satisfy regulatory and QMS requirements (act as Equipment Control Administrator in Singapore)
• Participate in development projects and change control request meetings to support the resolution of engineering issues
• Collaborate with the post-market surveillance team and complaints investigation teams to maintain risk management process throughout a product’s lifecycle
• Provide support for other quality activities and improvement initiatives, quality data collection and trending, CAPAs, change controls, training, etc.
• Support initiatives as identified by management to support QMS and other regulatory requirements in Singapore

Requirements

Experience

• At least 4+ years of Industry experience working as QE Engineer in Medical Device/ Pharmaceutical product or optical engineering business field
• Experience in test method validation
• Experience in Design control, Design Transfer, Design and Development Process
• Demonstrated knowledge of Risk Management (ISO14971), Design control, Design and Development Process and Quality System (any one of ISO13485).
• Understanding and Knowledge of biocompatibility studies
• Experience in coordination and planning of complex activities and ability to identify and resolve complex problems through effective use of technical and interpersonal skills
• Product development experience (e.g. approaches for definition of requirements and specification setting for verification and validation). Practical experience in design control and risk management
• Effective use of oral and written communication skills to clearly communicate the quality position, and the actions necessary to resolve issues
• Interpersonal, team, leadership, and negotiation skills to handle conflicting priorities
• Strong oral and written communication skills, excellent interpersonal and cross-cultural skills required
• Capable of clearly presenting and justifying quality requirements to management
• Accreditation by a professional body is highly desirable. Examples include American Society for Quality (ASQ) Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)

Skills/Accreditations

• Smooth communication ability
• Business software skills (e.g. Word, Excel and Power point)
• Experience with statistical software such as Minitab
• Voluntary working attitude with a creative idea
• Passionate working attitude to pursue a goal with patience.
• Flexibility for changes

Academic Qualifications

• A bachelor’s degree or higher in Chemical, Bioengineering, Mechanical, Optical Engineering or related fields.

Travel requirements

• 2-3 international travel annually mainly Thailand.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

We are looking for a Staff Analog Layout Engineer to contribute to the development of High-Speed Connectivity, Broadband Analog and Computing/Storage-Memory Data-Transport products (including functional blocks such as high-speed digital, multi-GHz ADC/DAC, PLL/DLL serial and parallel I/O, and clock generation/distribution for custom ICs). The candidate must have a proven record of laying out high-performance analog circuits in state-of-the-art CMOS process technologies, successfully performed top-level integrations, and placed products into volume production multiple times.

Requirements

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and at least 5+ years of related professional experience.
• Master’s degree in Computer Science, Electrical Engineering or related fields with 3+ professional experience.
• Deep understanding of layout methodology from initial chip planning to tape-out.
• Deep understanding parasitic optimizing in layout
• Experiences in advanced process technology and Fin-FET is preferable.
• Have a high level of proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc. reports.
• Have a high-level proficiency/knowledge of Synopsys or CADENCE layout entry tools.
• Programming skills in any of the following are a plus: Skill or Ample or Perl, etc.
• Strong technical and analytical background, problem solving skills, etc.
• Fluent in English

• Singapore Based (Bukit Merah)
• 5 Days 8.30am to 5.30pm
• Salary - $2500 to $3500 (Depends on experience)
• Nitec or Diploma in Electrical Engineering or Equivalent; At least 1 year experience in sales/customer service.
• Career Progression Opportunities

Requirements

• Nitec or Diploma in Electrical Engineering or Equivalent
• At least on year experience in sales/customer service
• Electrical Knowledge

Job scope

• Your job and responsibilities include support sales personnel for pre-sales activities, proposing solution that suits customer needs & resolve related solution for site preparation, installation, start-up, commissioning, repair and maintenance of Electrical Power System, Structural cabling, Fire suppression system, UPS, Security Access and CCTV Monitoring System etc.
• To supervise and oversee the work progress of project sites. This includes attending to site meeting, coordinating with appointed sub-contractors of various services to see to a smooth completion of projects.
• You will be assisting the Electrical Service Department in providing technical support to our staff, customers, and dealers.
• Prepare and maintain all project management documentation in accordance with company’s best practices.
• Planning and monitoring the project to ensure successful completion within planned timeline as well as status of progress-in-work and report all matters related to project and services.
• You are required to perform a complete in-house testing of Power equipment’s.
• Answer and attend to service calls, fault-finding, repair and troubleshooting of Electrical System and Power equipment malfunction.
• Establish and maintain excellent relationships with the customer project team, supplier, sub-contractors, and clients.
• Coordinate and liaise with PEs and/or site supervisors on detail drawings, layout planning and understanding of site requirements.
• Prepare, submit, and follow up with applications to the relevant authorities or building management where required.
• Preparation of electrical products data & engineering drawing in AutoCAD (2D, 3D).
• You may be assigned with other job duties and functions as may be instructed from time to time by your superior or the management.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Responsibilities:

• Carry out supervision and coordination of mechanical and electrical works of the project and exercise all reasonable skill, care and diligence in the discharge of the duties.
• To supervise execution of the construction works and ensure that the works are carried out by the contractors in accordance with contract specifications and drawings.
• To monitor contractor’s site progress and performance as well as maintain proper site records on progress of work and documentation.
• To conduct progress inspections to ensure work carried out complies with quality standards, requirements and specifications.
• To highlight any critical/major issues, discrepancies, feedback site progress and irregularities to Clients/Consultants.
• To liaise with contractors in the coordination of site works and resolving site installation issues.
• To ensure the contractors maintain work site safety, cleanliness and tidiness of the site.
• Undertake any other duties related to the project assigned.

Requirements:

• Diploma / ITC (Higher NITEC/NTC-2 NITEC) in Mechanical/Electrical Engineering from a recognized institution.
• National Certificate in Construction Supervision from BCA or equivalent preferred.
• Preferably registered as Resident Technical Officer accredited by IES/ACES.
• Minimum 5 years of relevant experience in building services in the supervision of commercial/ institutional development with strong knowledge of mechanical and electrical services and local construction practices.
• Proficient in MS Word and Excel for project update and reports.
• Familiar with local codes & regulations.
• Good communication and interpersonal skills.

[ 本地公民 / PR / 家屬准證LTVP ]

新加坡 日本販賣機公司

Singapore Vending Machine Company

• 跟車員

負責協助司機運送販賣機，早送完早下班

• 本地銷售協調員 Technical sales coordinator

接洽客戶做公司的產品介紹、推薦和報價，需配合其他組員做販賣機的維修、保養和故障處理，對電子零件設備有相關經驗

以上職位

綜合月薪Gross Salary : S$2400-$2800

老闆很照顧員工，加薪快

地點：公司LoYang，項目全島

有興趣發簡歷到 whatsapp +65 86537112

Job Choices Solution Pte. Ltd

EA No. 24C2254

Ang Hock Ann R24122146

Posted Job Advert

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

The Senior QA Specialist will support day-to-day Quality Assurance activities in accordance with approved SOPs / Policies for a multi-product, cGMP contract manufacturing facility.

Key Responsibilities:

• Oversee daily Quality Assurance (QA) operations in line with approved SOPs and policies within a multi-product, cGxP contract manufacturing environment.
• Demonstrate strong motivation and exceptional expertise across all relevant job functions.
• Competently review and approve SOPs, protocols, reports, and records.
• Participate as an active member of cross-functional site teams handling various projects and issues.
• Coordinate multiple activities across departments, ensuring seamless communication and workflow.
• Exhibit excellent troubleshooting abilities, identifying process pathways and developing strategic improvements.
• Possess advanced knowledge of cGMP topics.
• Contribute to regulatory inspections or customer audits as needed.
• Lead or support improvement initiatives and strategic process developments.
• Quickly adapt to leadership roles in various process areas as required.
• Assume supervisory responsibilities in the absence of the direct supervisor.
• Comprehend and communicate the company’s business strategy while maintaining a wide-ranging perspective on operational trends and changes.
• Provide QA oversight to QC/DS lab services, Engineering, and Validation activities, reviewing documents and Trackwise records outside routine operations. Documents may include, but are not limited to, PQR, BLA content, new product introductions, qualification/validation strategies, gap assessments, and customer suspension/decommissioning processes.
• Actively participate in or lead complex investigations into deviations, change controls, CAPA proposals, and discrepancy reports using Root Cause Analysis tools to ensure timely and effective resolution.
• Oversee the proper implementation and timely closure of CAPA related to deviations.
• Support regulatory inspections or customer audits, confidently representing the company as a subject matter expert in QA oversight.
• Offer QA oversight for site-wide improvement projects, collaborating across departments to ensure clear communication and updates.
• Lead or assist in resolving complex process and project issues.
• Mentor and coach junior team members, fostering their development.
• Formulate and present solutions to internal and external teams and management.
• Represent QA Validation/Technical Compliance in decision-making processes during internal and external cross-functional meetings.
• Complete any additional tasks as assigned by the supervisor.

Key Requirements:

• Bachelor's degree or higher in Life Sciences or Pharmaceuticals, with significant experience in Validation and Quality roles within the Biopharmaceutical industry.
• A team player with 5+ years of relevant experience in a similar industry or role.
• Thorough understanding of regulatory requirements and local codes and standards (e.g., FDA, EMEA, ICHQ7).
• Practical and theoretical experience in quality management systems within GM facilities.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

We are seeking a highly motivated and experienced Team Lead to oversee the Bank’s Asset and Liability management (ALM) reporting application. In this role, candidate will be responsible for leading a team of skilled SAS professionals in developing and implementing technology solutions to facilitate the Daily/ Weekly and Monthly Regulatory reporting for Balance Sheet Risk Management Business Users.
Candidate is required to work very closely with Cross-functional teams who provide us the balance sheet data to facilitate the regulatory reports

Key Responsibilities:

• Lead and mentor a team of technology SAS professionals focused on ALM initiatives.
• Collaborate with stakeholders to define project and BAU goals, objectives, and deliverables as per the ALM roadmap.
• Oversee the design, development, and implementation of ALM projects and BAU quarterly change requests.
• Conduct regular assessments of the application and recommend improvements.
• Ensure the team adheres to best practices in software development and project management methodologies.
• Manage team performance through effective goal setting, coaching and performance reviews.
• Facilitate communication between GETO and Business stakeholders to ensure alignment and clarity on project scope and cascade it back to technical delivery team
• Stay current with emerging technologies to identify opportunities to improve the application.
• Prepare and present reports on project status and present to senior management.
• Oversee the BAU Quarterly CR release and shoulder the lead role for L3-Production Service recovery.

Qualifications:

• Bachelor’s or Masters degree in Computer Science, Information Technology.
• 11 to 15+ years of experience in Technology development, with at least 6 years in a leadership role
• Strong understanding of risk management principles and practices, as well as relevant regulatory requirements.
• Proven experience in project management methodologies (Agile, Waterfall, etc..)
• Excellent technical skills, including proficiency in SAS 9.4/ VIYA framework.
• Experience with data analytics, machine learning or AI applications and familiarity with cloud technologies will be an added advantage
• Strong analytical and problem-solving skills with a focus on delivery results.
• Exceptional communication and interpersonal skills, with the ability to work effectively with diverse teams and stakeholders
• Experience in developing and maintaining relationships with external partners and vendors.

Business Knowledge:

• Banking Background, specifically in Risk Management and/or Treasury.
• Understanding of Treasury and Retail products.
• Understanding of the business areas of Interest Rate Risk Management and Liquidity Risk Management (Balance sheet Risk management).

Technical Skills:

• Candidate must be able to apply good working knowledge of project procedures, work flows, and milestones in order to complete projects assigned.
• Base SAS and Advanced SAS certification + knowledge and working experience with SAS VIYA (this would be an added advantage)

• Singapore Based (Tuas) (Company Transport / Transport Allowance $120 if candidate possess own transport)
• 5 Days Monday to Friday: 8am to 5pm
• Basic Salary: S$3,200 – S$3,600
• Joining Bonus (T&C applies)
• Prior sales experience, preferably in direct sales, retail, or the fitness industry
• Career Progression Opportunities

Requirements

• Degree in Engineering or Chemistry
• At least 2 years relevant experience

Job scope

• To supervise and support the functions of incoming waste segregation including bulk waste and loose waste as well as weighbridge.
• To constantly monitor improve the department performance.
• To conduct periodic review of existing workflows and procedures, and make recommendations for improvements and executing the improvement plans.
• To supervise and ensure the effectiveness and smoothness of waste unloading, segregation and distribution.
• Daily and regular inspection of the plant processes and monitor the working area 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
• Ensure incoming waste streams being checked properly for suitable treatment processes and current safe work procedures are suitable for handling by operation staff.
• As the core coordinator, lead and monitor the communication flow among internal departments on incoming waste discrepancy and revise related SOPs accordingly.
• To evaluate and develop new treatment methods and handling procedures for new and unknown wastes, and review of operation costs and regular update to management.
• To implement and supervise correct EHS practices within the department.
• To work with resale for arrangement of recovered products to minimize the storage.
• To prepare and analyse daily and monthly operation records/reports (e.g., cost, productivity, quality, nonconformance, etc) on plant processing and maintenance.
• And follow up necessary corrective actions and monitor consistently to relevant department staffs to follow up closely.
• Regular briefing / training to be conducted to department staffs for safety handling of high flammable solvent, MSDS, PPE requirement and risk assessment before operations.
• To activate emergency response team of operation and maintenance staffs and response to any in house spill and fire incident if in case of emergency.
• To liaise with EHS department to ensure fellow dept staff are upkeep with method of handling and emergency equipment usages in terms of spills and fire incident and to conduct regular practice and drill exercises with different scenarios to workers so that they are well familiar in emergency to response in time.
• To ensure all fellow staffs are well trained according to OJT program and ensure they can follow up SOPs and work safely.

Secondary responsibilities

• To undertake any other tasks assigned by the Management from time to time.
• As an ISO committee member, to develop and implement documents for operation procedures, such as SOP, RA and MOC, SWP and participate in auditing the various departments as an Internal Auditor

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

MAIN RESPONSIBILITIES

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.

• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents, and site instructions.

• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans for discrepancies and report to the Superintending Officer / Consultant / Qualified Person as stated below:

• Check shop drawings submitted by contractor.

• Check as-built drawings and Operation & Maintenance Manual submitted by contractor.

• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.

• To check mock-ups done on site, where necessary.

• To ensure that the required construction tests in connection with the construction works are carried out where necessary.

Requirements:

• Diploma in Mechanical or Electrical Engineering from a recognized tertiary institution or relevant qualifications.

* Minimum ten(10) years of relevant experience as a mechanical and electrical engineer, of which at least three (5) years shall be in supervision of works similar in nature to major construction works in chemical, process, water/used water. Industrial projects of similar scale and complexity.

*Experience in PUB project is advantageous.

Contract Period: 5 years

Responsibilities:

• Define, prioritize, and execute the product roadmap, ensuring alignment with business goals for front-office Equities technology.
• Act as Scrum Master champion, facilitating agile ceremonies including daily stand-ups, sprint planning, reviews, and retrospectives.
• Engage with front-office traders, portfolio managers, and stakeholders to gather requirements, provide updates, and align on deliverables.
• Translate business requirements into technical specifications and manage the product backlog to ensure development readiness.
• Collaborate with cross-functional teams, including Development, QA, and DevOps, to ensure high-quality, timely delivery.
• Drive continuous improvement, promoting transparency, accountability, and efficiency within agile teams.
• Ensure compliance with regulatory standards and manage risks related to equities application development.

Requirements:

• Bachelor's degree in Computer Science, Engineering, Finance, or a related field.
• At least 10 years total work experience with minimum 5+ years as a Scrum Master or Product Manager, with specific experience in Equities applications within an investment banking front-office environment.
• Certified Scrum Master (CSM) or equivalent agile certification preferred.
• Strong knowledge of equities trading workflows and front-office technology systems.
• Proficiency in Agile methodologies and tools (e.g., Jira, Confluence).
• Familiarity with Equities applications, trading platforms, and regulatory requirements.
• Knowledge of Unix/Linux, FIX protocol, messaging systems (e.g., Solace), and data analytics platforms.
• Strong organizational skills with the ability to manage multiple priorities in a fast-paced environment.
• Excellent analytical and problem-solving skills with attention to detail.
• Effective communication and interpersonal skills, capable of engaging and influencing stakeholders at all levels.

Roles & Responbilities

• To study and familiarise with the whole development’s organisation, Site conditions, Conditions of Contract, Conditions of Sub-contract, M&E Specification/Drawings, Architectural, Interior, Structural and Specialist drawings, Coordination of M&E, Architectural, Interior, Structural and Specialist elements
• To carry out site supervision and inspection cords of all works done, including records of test inspections, status of work of the works including any off-site manufacturing as instructed by the consultant team so as to ensure that the installation works are constructed in compliance with the design intent, specification, working/approved drawings and quality of works required under the terms of the contract.
• To ensure timely submissions and check all drawings (including authority submission drawings and shop drawings)
• To monitor project progress of the works on site and at any off-site manufacturing facilities and report delays immediately.
• To provide standing supervision as and when directed by the consultant team.
• To maintain proper site records and updated daily res, safety, site diary, materials and equipment onsite, labour, dayworks, provisional quantities, etc.
• To check that the contractor executes preliminaries items.
• To check services routes and contractor’s setting out and report any deviations to the consultant team.
• To verify reports and monitor the progress of work on site, verify the contractors’ progress report and present the report to the DM (Development Manager) in such format that the progress payment claim by the contractor can be easily evaluated.
• To monitor all variations works as instructed or approved by consultant team.
• To attend site progress meetings/technical meetings/consultants’ meetings.
• To attend to contractor’s queries and co-ordinate works of main contractor and direct contractors.
• To inspect completed works and ensure works are carried out in accordance to statutory requirements
• To undertake any other duties related to the project including supervision of M&E works as and when instructed by the consultant team.
• To compile relevant equipment, material, inspection and test certificates submitted by the contractors and pass them to the DM as required for the project records and the clients’ hand-over package.
• To compile Punch List or Defect List with the contractors and ensure that the contractors carry out rectification work diligently to clear all defects during the Maintenance Period.
• To witness all the inspection, testing and commissioning sessions performed by the subcontractors to ensure compliance with designs and specifications.

Job Requirements

• Possess at least a recognised Diploma/Nitec in Electrical and/or Mechanical Engineering/ Building
• Preferably Registered resident technical officer with IES / ACES
• Minimum 5 years of experience as RTO on local project, preferably with experience in school projects
• A good team player and experience in assisting the consultant team / Resident Engineer in supervision

We are seeking a highly motivated and experienced Team Lead to oversee the Bank’s Asset and Liability management (ALM) reporting application. In this role, candidate will be responsible for leading a team of skilled SAS professionals in developing and implementing technology solutions to facilitate the Daily/ Weekly and Monthly Regulatory reporting for Balance Sheet Risk Management Business Users.
Candidate is required to work very closely with Cross-functional teams who provide us the balance sheet data to facilitate the regulatory reports

Key Responsibilities:

• Lead and mentor a team of technology SAS professionals focused on ALM initiatives.
• Collaborate with stakeholders to define project and BAU goals, objectives, and deliverables as per the ALM roadmap.
• Oversee the design, development, and implementation of ALM projects and BAU quarterly change requests.
• Conduct regular assessments of the application and recommend improvements.
• Ensure the team adheres to best practices in software development and project management methodologies.
• Manage team performance through effective goal setting, coaching and performance reviews.
• Facilitate communication between GETO and Business stakeholders to ensure alignment and clarity on project scope and cascade it back to technical delivery team
• Stay current with emerging technologies to identify opportunities to improve the application.
• Prepare and present reports on project status and present to senior management.
• Oversee the BAU Quarterly CR release and shoulder the lead role for L3-Production Service recovery.

Qualifications:

• Bachelor’s or Masters degree in Computer Science, Information Technology.
• 15+ years of experience in Technology development, with at least 6 years in a leadership role
• Strong understanding of risk management principles and practices, as well as relevant regulatory requirements.
• Proven experience in project management methodologies (Agile, Waterfall, etc..)
• Excellent technical skills, including proficiency in SAS 9.4/ VIYA framework.
• Experience with data analytics, machine learning or AI applications and familiarity with cloud technologies will be an added advantage
• Strong analytical and problem-solving skills with a focus on delivery results.
• Exceptional communication and interpersonal skills, with the ability to work effectively with diverse teams and stakeholders
• Experience in developing and maintaining relationships with external partners and vendors.

Business Knowledge:

• Banking Background, specifically in Risk Management and/or Treasury.
• Understanding of Treasury and Retail products.
• Understanding of the business areas of Interest Rate Risk Management and Liquidity Risk Management (Balance sheet Risk management).

Technical Skills:

• Candidate must be able to apply good working knowledge of project procedures, work flows, and milestones in order to complete projects assigned.
• Base SAS and Advanced SAS certification + knowledge and working experience with SAS VIYA (this would be an added advantage)

• M&E Technical Manager (Electrical/ Mechanical)
• Working Day: 5Day | Mon – Fri 8.30am – 6pm
• Location: Ang Mo Kio, Singapore
• Salary: $6,000 - $9,000 + Bonus
• Singapore M&E Service Providers

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical & Electrical services.
• Good knowledge in M&E works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for M&E services is preferred

Job scope

1. Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.
2. Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.
3. Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
4. Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
5. Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
6. Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
7. Plan and execute with tender team to achieve KPI.
8. Suggest Value Engineering solution for MEP works, if required, in the tender.
9. Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
10. Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
11. Provide technical expertise and guidance to support the decision-making process during tender evaluations.
12. Evaluating quotations from sub-cons/suppliers according to tender requirement.

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

Mechanical Engineer requirements

Salary Range $3,500 - $5,000

Key Responsibilities

• Involved in full cycle mechanical design from conceptualization, designing, research and development.

· Evaluate final product’s overall performance, testing, reliability, safety and commissioning.

• Define design approach for new product and platforms and generate design specifications
• Execute new product designs personally, and oversee outsourced resources where appropriate
• Execute quick turn prototyping, 3D samples, debugging, verification testing, and performance characterization of new designs
• Support current platforms with enhancements and improvements where needed
• Support manufacturing engineering as necessary and provide appropriate tools and techniques to the service organization
• Execute/manage compliance testing and documentation
• Adhere to best practices for documentation and version control

Minimum Requirements and Qualifications

• Bachelor's degree in Mechanical / Mechatronics Engineering
• 5+ years hands-on design and development of Analog and Digital circuitry and/or embedded systems.
• Knowledge & Skills in SolidWorks, 2D and 3D software or more.
• Proficient with laboratory instrumentation, tooling fabrication, die-casting, extrusion, plastic injection moulding and metal stamping process.
• Utilize various tools of specialization (CREO/ DFM/ DFMEA/ Tolerance Analysis/ Simulation etc.) to design, validate and improve existing designs
• Proficient with MS Word, MS Excel, PowerPoint

Additional Qualifications

• Experience in LED, Automation , Thermal and optical design

Job Description

• Industry/ Organization Type: Electrical Equipment Manufacturer/ Production
• Position Title: Technical Support Engineer
• Working Location: Ubi
• Working Hours: Monday to Friday, 8.30 am – 5.30 pm; Saturday 8.30 am – 12.30 pm
• Salary Package: Up to $5,000 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Provide technical support to customers for UPS, DC Systems, and Battery installations, commissions, repairs, and maintenance.
• Coordinate with end-users on-site to ensure smooth installation, commissioning, and maintenance activities.
• Collaborate with customers and engineers to ensure safe execution of site work.
• Deliver training to customers on the startup and operation of UPS and DC Systems.
• Monitor and follow up on maintenance contracts to ensure work is completed promptly.

APPLY NOW!!!

• Minimum Diploma in Electrical/ Electronics Engineering or its equivalent.
• At least 3 years of relevant experience in the UPS and DC power industry.
• Willing to travel across Asia on short notice.
• Immediate availability and own transport required.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69101 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing (O&G)
• Position Title: Technical Sales Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Develop and grow key accounts in the Oil & Gas or Petrochemical sector.
• Establish and maintain business relationships with target customers to secure sales.
• Cultivate a comprehensive understanding of the customer’s operations and objectives.
• Develop and adhere to optimum profit margins and pricing points.
• Monitor assigned accounts - including progress, customer requests, competitor activity, and execution updates.
• Collate forecasts and reports for each key product/service offering assigned.
• Plan and negotiate long-term contracts with key account customers.
• Present and close sales opportunities to executives at major oil companies.
• Continually push company’s product/services to existing customers.
• Coordinate site work and discuss technical requirements on-site with customers.
• Review customer requests and provide technical solutions.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent.
• Has 3 years of working experience in downstream oil and gas/petrochemical industry preferred.
• Prior experience in flange management is advantageous.
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works. 
• Performance at this level requires developmental experience in a professional position.

Working Location: Ang Mo Kio

Working Hours: 8.30am-6.15am (Mon-Fri)

Responsibilities:

• Machine servicing, installation and training
• Lapping and polishing machine operation.

Requirements:

• Exp in Precision Engineering machine operation or machinery servicing
• Knowledge of Mitsubishi or Siemens PLC is added advantages

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to [email protected]

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion!

R22103985 | EA License 16C7883

• Company located at Woodlands

• Working hour: 8:30am – 5:30pm (Monday – Friday)

• Variable Bonus + Excellent Welfare

• Well Established Industrial Automation Company (MNC)

Job Scope

• Analyze project requirements for industrial robotic equipment/machines.
• Design, and test electrical control systems for industrial automation.
• Create detailed electrical schematic drawings using E3 (or ePLAN as a second option).
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Provide on-site technical support during the installation and commissioning of robotic equipment/machines.
• Troubleshoot and resolve electrical and control system issues.
• Maintain detailed documentation throughout the project lifecycle.

Requirement

• Degree in Electrical Engineering / Control Systems Engineering or related disciplines
• 2 to 4 years of relevant experiences and roles in Industrial Automation
• Experience in programming motion controllers, robots, or touch panels is an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:

• Ensure chiller systems operate at optimal performance and efficiency.
• Provide exceptional service by addressing client inquiries and concerns about chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues, implementing effective solutions.
• Educate clients on proper operation and maintenance practices to enhance the lifespan of their chiller systems.
• Prepare detailed reports outlining service activities, findings, and recommendations for improvements.
• Execute commissioning processes for new chiller installations, ensuring proper setup and functionality.
• Work with MHI agents, customers, and contractors to verify system performance and compliance with specifications.
• Foster collaborative relationships with contractors to encourage teamwork and shared problem-solving.
• Adhere to safety protocols and regulations, conducting safety briefings to ensure understanding of responsibilities.
• Perform field-based tasks in various environmental conditions, including outdoor settings.
• Be available for chiller breakdown calls during assigned standby shifts.

Job Requirement:

• Diploma and Degree
• 3-5 years of proven experience in chiller maintenance, commissioning, or related HVAC roles.
• Strong technical knowledge of chiller systems, HVAC principles, and electrical controls.
• Excellent problem-solving skills with a keen attention to detail.
• Strong communication and interpersonal skills for effective interaction with clients and team members.
  Ability to work independently and manage time efficiently.
• Completion of Building Construction Supervisors Safety Courses or equivalent certifications

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Ding Xin Er

EA Personnel Reg No: R22106669

Position title : Business Central M365 Technical Consultant
Location: Commonwealth Ln, One Commonwealth
Working Days: 5 days
Working hours : 9am-6pm
Salary : $5,000 - $8,000

Roles & Responsibilities

• Collaborate with functional consultants to develop add-on solutions for customers.
• Develop programs in Dynamics NAV and Dynamics 365 Business Central (on-premise or online).
• Participate in business requirement study.
• Develop Power BI Report and Dashboard.
• Develop Apps for Business Central using Power App.
• Manage & review team of outsource employees’ projects

Requirements:

• Skill in NAV C/AL, Business Central AL, JSON, .Net programming.
• Business Central Reports design.
• Webservices & API programming.
• Possess minimum a Diploma / Degree in IT.
• Minimum 5 years of relevant working experience.

Interested Personal kindly contact WhatsApp :+65 8833 7969(Lydia)

OR

Email to : [email protected]

The Supreme HR Advisory Pte Ltd

Reg No: R1988890

EA No: 14C7279

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday - Friday: 8.30am to 6.00pm
• $ 4,000 - $6,000

Key Responsibilities

• Electrical Design: Collaborate on system requirements, develop schematics, select components, and design control logic for marine vessel propulsion/control systems.
• Commissioning and Integration: Oversee installation, testing, and validation of electrical systems.
• System Optimization: Analyze performance, identify optimization opportunities, and implement innovative solutions.
• Documentation and Reporting: Create technical documentation and commissioning reports.
• Regulatory Compliance and Safety: Ensure compliance with maritime regulations, industry standards, and safety guidelines.

Requirements

• Diploma/Bachelor's in Electrical Engineering or related field
• Relevant experience in electrical design/commissioning (marine propulsion/control systems preferred)
• Proficiency in electrical design software (AutoCAD Electrical, EPLAN) and simulation tools
• Knowledge of marine electrical systems, industry standards (ABS, DNV, IMO), and regulations
• Requires to travel overseas for commissioning activities (shipyards/vessels)

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

We are seeking a Lead Application Support Engineer to to manage and oversee the smooth operation of critical applications, ensuring seamless user experience and system functionality.

• Competitive remuneration package (up to $6,300 + AWS + VB).
• Hybrid working arrangement.
• Leadership Role: Take charge of support operations and lead a dedicated team.

Responsibilities:

• Oversee and manage a 24/7/365 level 1 application support team, ensuring continuous support for both applications and systems.
• Participate in the recruitment and management of staff, including planning and organizing shift rotations.
• Train team members on the application's functionality, interface, and features, ensuring they are equipped to handle support tasks.
• Ensure team members provide adequate support to end-users, while also delegating tasks and responsibilities effectively.
• Take full ownership of all issues raised, ensuring they are resolved, regardless of which development team or vendor is responsible.
• Act as the primary point of contact for both technology teams and end-user clients on a day-to-day basis.
• Maintain and update a knowledge base of known issues, defects, and troubleshooting techniques, and ensure problem tickets are properly managed.
• Handle escalations effectively and manage client expectations to ensure smooth operations.
• Debug and improve application code when necessary to resolve issues or enhance functionality.

Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Minimum of 3 years experience in relevant roles.
• Prior experience in supporting Web-based applications.
• Experience with some programming languages and willingness/ability to learn.
• Familiarity with IT industry practices and methodologies (ITIL foundation certification will be an added advantage).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Responsibilities

• Conduct regular inspections to co-locate areas/systems with refresh requirements and propose refresh plans for identified areas/systems.
• Conduct periodic engagement with building users to collate user request and feedback relating to office and facility refreshes.
• Manage and supervise on work status, quality, and quantity of all improvement and replacement works and maintenance works.
• Monitor and report to the Management on status and performance carried out by the respective personnel/team, strategy, adjustments, progress, budget utilisation, etc.
• Liaison and coordinate with all vendors/contractors/multidisciplinary team/suppliers engaged by the Authority for refresh work.
• Liaise and coordinate with local Authorities on periodic audits required under prevailing local regulations, including all necessary consultation sessions with various Authorities and Statutory boards. Assist the Authority with periodic audit checks and preparation of audit reports.

Requirements

• Recognised Higher NITEC/Diploma or any Professional Certification in Project Management, FM, Building Services, or related discipline (individuals with sufficient working experience will also be considered).
• Recognised and valid accreditation in Project Management.
• Min 3 years of relevant working experience
• Possess good communication, interpersonal, and supervisory skills.
• Proficient in MS Office tools and data analytical skills