Total 2,298 job vacancies in woodlands tuas north west

Adjunct Assistant Professor in Physics

The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

The Division of Physics and Applied Physics (PAP) at NTU invites applications for positions at the rank of Adjunct Associate Professor in Physics. We are looking for candidates holding a Ph.D. degree in physics.

The Adjunct Associate Professor will collaborate with PAP colleagues to work in the area of plasma physics for fusion clean energy, in particular plasma turbulence measurements making use of microwave diagnostics. He/she will get involved with collaborated research with PAP colleagues in the fusion science programme, as well as explore collaborations with colleagues from other Schools within NTU, and international collaborations in fusion science and technology.

The candidate should have 3 to 5 years of experience in modelling microwave diagnostics to measure fluctuations in fusion plasmas. In particular, he should be able to model radio frequency wave propagation in turbulent media to measure spectral properties of plasma fluctuations. He/she should also be involved in the international experimental programme in that field. Proven experience in modelling/measurement comparison will be appreciated. Moreover, he/she should have demonstrated an ability to publish in top-tier journals in plasma physics.

Enquiries about the position can be addressed to Professor Xavier Garbet, at [email protected].

Applications will be accepted until the positions are filled. All applications and materials submitted will be held in strict confidence. Only shortlisted candidates will be notified

• Familiar with evaluation of tenders, preparation of tender and quotation.

• Responsible for taking off measurement and monthly progress claim.

• Ability to source for supplies and sub-contractors for quotation for tendering.

• Project administration and documentation include preparation of interim.

• Review and advise the Project Manager on the cost impact for variation of project specification.

• Minimum Diploma in Quantity Surveying or a related field.

• A minimum of 2 years work experience in structural steel works is necessary for this position.

•full-time position available.

•All applications to be strictly via emails.

Diploma/Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering,science

Minimum 10-15years

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

The International Trade Administration Team (ITA) is responsible for operational implementation of, and ensuring adherence to, various international trade compliance programs that support Seagate’s import/export activity. This group is sited in Seagate Woodlands that oversee Trade compliance ensuring that the company complies with Trade facilitations globally and meeting the overall goal of operational excellence. This is made possible with the collaboration with across ITA organization.

We are looking for a highly motivated and energetic individual with excellent organizational skills to join our team as a Senior Analyst. This role involves managing resources and analyzing various data sets, including financial data and reports, to identify strengths and weaknesses for both the business and its clients. The incumbent will maintain up-to-date knowledge of the industry, including potential threats and challenges.

This is an individual contributor role reporting to the Manager of International Trade Administration. Key responsibilities include:

• Possessing a strong understanding of SAP products to support key qualifications and improvements for achieving deliverables.
• Gathering, interpreting, and utilizing complex data to develop actionable steps that enhance processes and optimize results.
• Managing operational data related to import/export activities and ensuring compliance with regulatory requirements.
• Overseeing key qualifications to achieve Best-In-Class status, ensuring schedules are met and implementations are timely.
• Building and maintaining strong partnerships with internal and external organizations to stay informed about impending changes and potential issues.
• Identifying and exploring projects aimed at achieving product cost goals.
• Participating in customs certification and audit processes.
• Performing other tasks as assigned by the manager.

Job Requirements

• Degree in Business Administration or relevant disciplines.
• Demonstrate independence, resourcefulness, and a collaborative attitude as a team player.
• Exhibit strong interpersonal and effective communication skills.
• Possess project management expertise.
• Have in-depth knowledge of Singapore’s import and export laws and regulations.

About You

• Possess strong knowledge of Asia Pacific trade compliance.
• Experience working in a manufacturing environment.
• Collaborate with government and regulatory agencies on import/export customs matters.
• Handle negotiations and resolve emergencies related to customs clearance.

Responsibilities

· Treat safety and environmental compliance as a top priority.

· Manage and implement the Company’s QHSSE policies to identify, assess and control occupational safety, process safety, site security and quality control.

· Implement risk management, conduct risk assessment to identify and communicate hazards in security, quality and safety behaviour

· Manage all third-party certifications (ISO & bizSAFE), audits, management systems including Standards Operating Procedures and Work Instructions implementation on policies and procedures

· Lead and guide Integrated Management System (IMS) and ensure change management is in compliance with regards to overall IMS.

· Identify and conduct training for staff on QHSSE matters to increase awareness and improve the safety & health culture through promotion of such programs.

· Direct and participate actively in all near misses / incidents / accident / customer complaints investigations with root cause analysis and recommended preventive / corrective measures.

· Help develop an ecosystem that identifies and evaluates hazards and eliminates them before accidents occur.

· Audit, track, record and report compliance with the Integrated Management System, and by doing so, ensure all employees comply with all safety & health, security and environment practices established within the Group and those prescribed by National certification and legislation bodies.

· Lead monthly QHSSE meetings with management to discuss customer complaints, occupational incidents, near misses, regulatory changes, training needs, and action plans.

· Act as the primary contact for regulatory agencies and industry associations regarding HSE matters.

· Daily management, supervision and management reporting of all outsourced third-party contractors deployed to site including but not limited to general renovation, pest control, landscaping, and other assets.

· Inventory, procurement, budget management and reporting for all supplies necessary to support the efficient functioning of the services within the facility.

Requirements

· Minimum 5 years of experience in similar role.

· WSH Level C or equivalent

· Preferably a certified ISO lead auditor.

· Good working knowledge of ISO 9001, ISO 14001 & ISO 45001,

· Well versed in Workplace Safety & Health Act & regulations, Environmental applicable Acts & Regulations

· Ability to influence and engage stakeholders at all levels.

· Able to train, lead and motivate team & colleagues.

· Strong interpersonal skills.

· Strong project Management skills.

· Analytical and problem-solving skills.

· Meticulous and able to multitask

We are representing our client in the Food Services industry to hire for a (Senior) Sales Manager.

Role Overview:
Drive sales growth, develop strategies, and lead a high-performing team to achieve revenue targets. Build strong client relationships, expand market presence, and contribute to business success.

Key Responsibilities:

• Develop and execute sales strategies to meet growth objectives.
• Lead, coach, and inspire the sales team to achieve targets.
• Manage key client accounts, negotiate contracts, and ensure satisfaction.
• Identify new business opportunities and drive market expansion.
• Collaborate with marketing and operations for seamless execution.
• Analyze performance metrics and adjust strategies as needed.

Qualifications:

• Strong sales background in Food Service.
• Proven leadership and business development skills.
• Results-driven, strategic, and excellent relationship management abilities.

Interested candidates, please apply here. Thank you.

EA Personnel (Koh Pei Wen)

EA Reg: R23115205

APBA TG Human Resources Pte Ltd

EA License: 14C7275

The position holder is responsible for checking the engineering datasheets of designers when required, assisting the production team, and E & I contractor(s) in technical clarifications and solutions to solve site problems, and assisting the commissioning team to solve E & I engineering problems

Key tasks:

• Carry out testing of all aspects of industrial generators, control panels, synchronizing panels, and fuel pump panels to ensure the product works to its specification.
• Setting up test bench and equipment includes load bank test on generators
• Able to read and understand electrical and mechanical drawings/layout
• Require to generate factory and site test report
• Troubleshoot and diagnose problems and minor repairs during testing and commissioning
• Aliasing with project engineers/managers to schedule and coordinate works to tight deadline
• Supervising and leading junior staff
• Ensure a safe work environment at all times
• Any other related activities or responsibilities as assigned by superior

Job Requirements:

• Min Nitec / Higher Nitec / Diploma in Electrical or Mechanical
• Min 1-year experience in a related field
• Knowledge of genset controllers/PLCs is an added advantage
• Good Knowledge and experience of generators will be considered engineer role
• Possess a valid Singapore class 3 driving license

Personal Competencies:

• Good interpersonal and communication skills
• Able to work as a team as well as individual under limited supervision

Job Highlights:

• Positive working environment
• 5 Days Work Week
• Attractive job package
• Flexible Work Arrangement (FWA)
• Age-Friendly Workplace Practices

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:-

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Job Description & Requirements

・Based on the presented DFM, we design injection moulds in 3D CAD to meet the customer's requirements.

・Because our customers include automotive, medical, sensors, stationery, industrial equipment, cameras, printers and many more, flexible mold design is required according to the customer's field

・It is required that employees share information about their work.

・Learning how to operate the CAD systems we use.

・Learning about the specifications of our injection moulds.Create a DFM to the specifications required by the customer.

・The initial target is for one designer to design about two injection moulds per month, in addition to the work assigned by the company.

・Create and modify 3D data required by the company from 2D drawings.

・Visiting to a supplier in Singapore to instruct and check the assembly of molds.

・Preparation of general office paperwork and inputting information into the system

・Cross-checking of drawing data by employees.

・Order mold components from suppliers in Singapore based on the requirements of the group companies.

・Checking, packing, and shipping of parts completed by the supplier.

・Going to Batam factory of group company to witness molding test and suggest improvement.

・Self-manage design time considering the presented schedule for product completion.

・Perform flow analysis, prepare and submit documentation as requested by the company.

・Proposals are required to improve the quality of work and make it faster.

・Devise and implement an appropriate correction method for the error of the molded product.

・Helping to create long-term value for the company by introducing new technologies and businesses.

・From 2024, we will introduce 3D printers and start producing new prototype samples and jigs.

• 5 days, Jurong, transport provided
• $3000 - $3600, AWS, performance bonus
• Career advancement

Responsibilities

• Ensure matching procedure is in place for payments processing purposes
• Resolve all invoices discrepancies and respond to enquiries on payment status
• Monitor and prioritize invoices for urgent payments
• Ensure proper and timely settlement of all invoices from vendors.
• Ensure all fully paid invoices/documents are clearly marked as paid and filed in an orderly manner within the accounting system.
• In charge of month end posting for all payment entries
• Perform bank reconciliation after passing adjustment journal entry in system cash book
• Assist in preparation of audit schedules
• Compile all the Import clearance permits for GST filing purposes
• Filling and keeping proper records of the payment documents
• Process staff claim
• Confirm and record all intercompany transactions and balances with the subsidiaries in the group accurately
• Train new staff in the AP process and operation flow
• Carrying out of ad-hoc tasks assigned
• Assist the Finance Manager and team in any ad hoc requirements or projects
• Assist in yearly stock take

Job Requirements

• Minimum a Higher Nitec/Diploma in Accounting or equivalent
• 2-3 year of experience in Accounts payable
• Able to read, write and communicate in English
• Good in Microsoft Office

Interested applicants, please send your resume to [email protected]

Duties & Responsibilities:

• Study drawings for the projects and understanding requirements
• Determine operation requirements and preparing schedule
• Liaise with internal/external parties for the execution of works
• Ensure timely delivery of projects according to schedule
• Updating of project records for reporting purposes and submission of reports
• Attend site meetings and resolve technical/operational issues independently
• Undertake ad-hoc duties related to project execution
• Any other ad-hoc duties assigned

Requirements:

• Diploma/ Degree in Civil Engineering or any equivalent
• Min. 2 years of experience
• Able to work independently and as a team
• Good communication and interpersonal skills

• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Sale Supervisor Job Duties

A sales supervisor typically has a wide range of responsibilities, which can include:

• Ensuring that employees have the tools and training they need to succeed in their jobs

• Building relationships with key clients and establishing long-term business partnerships with them

• Reviewing reports from managers to identify areas of improvement or new opportunities for growth in the company’s market share

• Establishing and enforcing company policies regarding customer relations, sales techniques, and ethics

• Developing and implementing training programs for new employees or existing staff members who are being promoted to new positions within the company

• Monitoring employee performance to ensure that they are meeting goals and adhering to company policies

• Managing a team of employees and ensuring that they are trained to perform their jobs effectively

• Reviewing customer orders and inventory to ensure that all customer needs are being met

• Conducting market research to identify new opportunities for growth in the industry

Job Description

We are seeking a meticulous and proactive Geotechnical Lab Assistant / Lab Data Processor to join our Geotechnical Laboratory team. The ideal candidate will support our Geotechnical Lab testing team by ensuring smooth processing and accuracy of lab data. This role requires strong organizational skills, effective communication, and proficiency in Excel.

• Provide essential support to the Geotechnical Lab testing team in conducting and organizing testing activities.
• Accurately process and analyze lab testing data, ensuring compliance with standard procedures.
• Assist engineers in compiling and preparing detailed lab reports based on testing outcomes.
• Maintain clear and professional communication with lab team members, both verbally and in written English, to ensure accurate data handling and reporting.

Requirements

• Proficiency in Microsoft Excel, including data entry and analysis functions.
• Strong attention to detail, with the ability to work independently and as part of a team.
• Excellent communication skills in English, both verbal and written.
• Prior experience in a Geotechnical laboratory setting or data processing is a plus.
• If you're detail-oriented, skilled in data processing, and enjoy working in a lab environment, we encourage you to apply and join our dedicated team.

Come join an exciting, fast growing Singaporean F&B brand!

Responsibilities

· Develop and implement marketing and branding strategies to promote the Har Har Chicken brand and products.

· Establish positioning, identify target audiences, and develop marketing plans with specific objectives across different channels and segments.

· Manage and develop marketing campaigns, website content, social media to reach target audiences.

· Create compelling and engaging content for marketing collaterals, such as social media posts and promotional material.

· Analyze customer insights, consumer trends, market analysis, and marketing best practices to build successful strategies.

· Develop and manage advertising campaigns to build brand awareness and positioning while identifying potential customers.

· Drive the success of the Har Har Chicken brand including building top of mind recall, improving customer experience and increasing revenue

· Stay abreast of industry trends, emerging technologies, and best practices to constantly innovate and improve marketing strategies and tactics.



Requirements

· Degree in Marketing, Mass Communication, Business or related discipline.

· Minimum 3 years’ relevant brand management and marketing experience.

· Experience in the F&B industry will be an added advantage.

Key Responsibilities:

• Develop and formulate beverage prototype based on projects, industrial standards and country-specific requirements.
• Handle and lead beverage application projects such coffee, tea, dairy, plant-based, carbonated soft drinks, fruit juices, energy drinks, flavored water and alcoholic beverages.
• Handle lab process equipment including UHT, aseptic filler, homogenizer, carbonator, hot water bath, autoclave and high shear mixer.
• Good understanding of product heat treatment for different beverage categories to ensure product safety.
• Select and evaluate the right flavor solution in compliance with applications requirements.
• Strong sensory skills to evaluate and select appropriate flavors.
• Understand the commercial needs for the category/market and be the technical contact/support for the key category customers/markets.
• Design, prepare and conduct shelf life testing for beverages.
• Manage raw materials, laboratory supplies and housekeeping.
• Work closely with cross-functional teams to achieve project goals.
• Maintain effective communication with team members and clients.

Qualifications:

• Basic sensory skills
• Basic Chemistry
• Basic laboratory procedures and methodology
• Knowledge of flavour-related products
• Good communication and presentation skills
• Good Interpersonal skills
• At least 5 year of relevant experience in sweet application

•Working with Process Engineer & Engineering team on QC requirement.

•Documenting inspection criteria and quality plan.

•Work with QA, Process and Product team on corrective action with quality issue.

•Work with Process team on in-process audit and FQC audit.

•Control of Supplier Quality Assurance (SQA).

•Quality control of in-coming, in-process and out-going products.

•Assist in Project team/Construction team.

•Quality check on finishing work accordance to method of statement

•Prepare and compile report after inspection.

•Plan on construction site visit and liaise with Project Manager or Engineer

•Liaise with Authority for Certification

•Provide Training to workers accordance to method of statement.

We're seeking an organized and detail-oriented Admin Executive to join our vibrant team! In this role, you'll be responsible for managing administrative tasks, overseeing data tracking, and maintaining dashboards to support efficient operations. You’ll play a crucial role in ensuring smooth day-to-day activities while also contributing to the growth and success of our preschool.

Key Responsibilities:

- Manage administrative tasks such as handling inquiries, scheduling, and documentation.

- Maintain and update data systems, ensuring accurate records of student enrollment, attendance, and financials.

- Develop and monitor dashboards to track key performance metrics and report on operational performance.

- Support in preparing reports, presentations, and other administrative needs for management.

Requirements:

- Detail oriented

- Proactive and show initiatives in daily tasks

- Have a strong willingness to learn

Salary: $3000 basic

Working Days & Hours : Monday to Friday, 9 AM - 6 PM

Working Location: Blk 134 Jurong Gateway Road #03-309, Singapore 600134

Job scope:

• Ensures that safety and quality standards are being met and maintained at all times within the company's safety and QA programs and work with assigned staff to ensure work schedules are maintained and balanced
• Responsible for the location safety performance and awareness; spearheads and manages initiatives that drive a culture of safety first and advise team on technical issues with regard to the successful and timely completion of daily work
• Under the direction of the General Manager, is responsible for directing, coordinating, facilitating and monitoring the daily activities of the lab operations
• Provides and sets direction within the lab to ensure that production goals and customer expectations are consistently met in a safe, timely and cost-effective manner and demonstrates deep knowledge of the Company's capabilities, processes and expertise to be able to clearly explain the benefits of The Company's testing services to all audiences -- internal and external
• Provides technical and engineering leadership, and supports the development of new technologies within a local laboratory and potentially across the Company's enterprise and provides counsel to coworkers and customers requiring critical analysis of data
• Is able to exchange technical information and knowledge with peers, senior colleagues and specialists across the element enterprise and actively seeks ways to disseminate critical testing knowledge, acumen and protocols throughout the company
• Provides input and support on business development opportunities with new or existing customers
• Confident making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders

Requirement:

• Possess Bachelor Degree in Civil Engineering or Materials Science discipline with a minimum of 5 years of experience in a management role ideally with operations management experience
• Working knowledge of laboratory safety with extensive knowledge of the current suite of testing capabilities and proven ability to support and train staff members for the department in order to meet customers’ expectations on testing and possess strong technical leadership is vital to the production and operation of assigned tests with advanced working knowledge to operate various testing equipment
• Ability to communicate (written and oral) effectively with clients and colleagues with great attention to detail and timing of results and possess proven track record of success with regard to technical competency both inside and outside of the lab
• Proven ability to multi task and work under strict time lines and strong organizational, problem-solving and conflict resolution skills to effectively establish and maintain twoway communications to understand the needs and concerns of all departmentsUnderstanding of continuous improvement disciplines such as Six Sigma, Kaizen, Lean Manufacturing, 5S, etc and posses strong project management, analytical and problem solving skills provide go-to insight in the daily efficient operation of the lab

Others Job Requirement:

Civil Engineering, Materials Science, Materials Engineering.

Must be very familiar with ISO17025. Good to have candidates with

Signatories of ISO17025

Familiar with coating, paint, tiling, waterproofing and other cementitious materials.

More job details:

Life Insurance, Medical, Dental and Hospitalization Insurance, AWS, Local Bonus Plan, Food is Provided.

Company Bus from Yew Tee MRT and Marsiling MRT

Working hours: 8.30am to 6.00pm Mondays to Fridays

Jessie Hoe Huey Miin

CEI R1103861

EA: 99C4599

•Knowledge of Revit/ Cad drawing.

•Past Working Experience in Main contractor and coordination MEP contractor able to produce CSD.

•Understand DfMA modular manufacturing and installation of MEP components.

•Review and fabricate models and drawings.

•Produce constructible 3D drawings and be able to translate them into 2D shop drawings.

•Understand the building Structural and Architectural and Mep services formation and installation.

•To assist the Project Managers / Factory Manager and project team with other tasks

•Prepare shop-drawings and follow-up subsequent comments returned by consultant and arrange for re-submission.

•Generate clash detection report and other relevant reports from 3D models.

•Model development, construction, documentation and production techniques.

•Examine and check drawings to ensure compliance with project requirements and specifications.

•Co-ordinate with engineers on drawings and documents for issue and filing

•Maintain Electronic File Naming Conventions and the overall drawing register in controlled documents.

•Liaise with engineers and architects on the preparation and coordination of documentation.

•Communicate relevant project information to the project leaders/project team.

•Implement and monitor Quality Assurance items.

•Effectively manage time to ensure work is completed within established periods.

1. Perform daily machine startup and shutdown procedures on CNC cutting equipment. 2. Stage raw materials at each work-center for the day’s production. 3. Load and unload machines. 4. Maintain daily dust collector service and associated logbook in assigned area and report equipment deficiencies. 5. Ensure production schedule follow through as allocated by the scheduling department. 6. Assist in loading and unloading team members’ machines when production requires additional manpower to maintain throughput. 7. Perform minor maintenance and cleaning of cutting equipment and work area in accordance with company standards and manufactures machine recommendations. 8. Perform some machine alignment procedures and optic cleaning to keep equipment at peak operating performance. 9. Facilitate work-order paper flow in accordance with TS/ISO quality standards. 10. Check parts on other cutting centers per TS/ISO standards if required. 11. Monitoring assist and resonator gas levels and recommend supply requirements for daily production. 12. Other duties assigned by Lead/Supervisor or Management. 13. Adherence to attendance policy (regular attendance)

Responsibilities:

• Assist Senior Contracts Manager in tender/contract review and finalizing the tender sum.
• Help with contract administration, progress claims, and liaise with the Client's representative on claims and variation costs.
• Compile subcontractor quotes for review and approval.
• Keep Contract Manager updated on all contractual and site matters.
• Review and verify subcontractor/supplier claims and prepare payment certificates for approval.
• Prepare final accounts and variation submissions.
• Maintain quality systems in the Contracts Department.

Requirements:

• Minimum Diploma in Quantity Surveying or equivalents.
• At least 5 years of working experience related field.
• Preferably experienced in pipe jacking works and tunnelling projects.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628