Job Description:

• Perform engineering design work, simulation and testing.
• Liaise with contractors, vendors, purchasers on fabrication and component purchase.
• Perform assembly and testing of prototypes
• Support trial testing conducted locally and overseas.
• Prepare technical paper and test report.
• Perform failure investigation and analysis.

Job Requirements:

• Degree in Electrical, Electronics or Mechatronic Engineering
• Possess passion in design
• Innovation, problem solver
• Good team player, positive attitude and committed
• Knowledge in electronics theory
• Experience in C/C++ coding
• Experience in image processing
• Experience in Network Communication
• Able to travel overseas
• Prefer candidate who have a class 3 driving license

Responsibilities

· Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)

· Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation

· Verify Logic at ISP level and Digital System level

· Optimize Design for less gate count and low power consumption

· Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

· Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience

· Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)

· Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.

· Strong debugging and problem-solving skills

· Good communication and interpersonal skills

· Result oriented and embrace change behaviours

Description

Electrical design engineers are responsible for the drawing creation and modification. The job is to come up with innovative ways to build new or improve existing panel and junction box (JB). Electrical design engineers must have an extensive knowledge of electrical engineering principles in order to do their job effectively. They need to be familiar with electrical components for panel and junction boxes.

Responsibilities

Safety

1. Ensure Workplace in Safe and Healthy Environment.

2. Ensure No Slips, Trips and Falls environment.

3. Maintaining a tidy workspace.

4. To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

5. To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Responsibilities

1. To have and maintain good daily attendance and punctuality.

2. To update team members at least 2 working days in advance before going for leave in order to minimize downtime.

3. Lead Ex Proof Team

Daily Task

1. Daily Update of Project Progress to immediate superior.

2. Weekly report progress

Main Task

1. Ensuring accurate adherence to the client's quotation specifications in the drawing.

2. Daily Update of Project Progress to immediate superior.

3. Weekly report progress.

4. Design and Update Electrical & Instrument system layouts, single line diagrams, control schematics.

5. Equipment/material schedules and data sheets, control wiring diagram for control systems etc.

6. Drafts engineering documents for client’s submission or for construction.

7. Performs electrical calculations on cable sizing, lighting illumination level, cable ladder/tray sizing etc.

8. Preparation of Project Design basis and specification.

9. Preparation of Single Line Diagram.

10. Preparation of Cable and Power Layout, Earthing Layout and Hazardous Area Layout.

11. Basic Technical and feasibility studies based on the process scope of work.

12. Resource Planning for design works.

13. Performs drafting on all engineering and construction drawings as per instructions given.

14. Produces revised or as-built drawings based on mark-ups and instructions given.

15. Other Ad-hoc duties assigned from time to time.

Special Task

1. Lead the Ex-Proof team.

2. Lead to Coordinate and cooperates with other disciplines for documentations to get approval by the Client.

3. Preparation of Template for Internal Components Drawings

Requirements

· Preferably Degree in Electrical Engineering or equivalent and above

· Preferably minimum 3 to 10 years of design experience in Schematics & Layout design (including library design), Cable Assembly Design, and Design documentation.

· Preferably Proficient with MS Office Program, AutoCAD

· Preferably Knowledge on designing in 3D layout will be an advantage.

· Proficiency in English (written and oral skills) is a must.

· A responsible, self-motivated, meticulous and resourceful team player with good organizational and communication skills.

· Ability to multi-task and work independently in a fast-paced environment.

· Excellent problem solving and time management skills.

· Familiar with Code of Practices, electrical design, electrical calculations

We are looking for a Design Manager for our Engineering department.

Responsibilities

• Lead the works in accordance with site specific HSEQ Construction Methodologies, Risk Assessments, Site Rules and Keller Policies and Procedures.
• Understand and manage clients' requirements and their obligations in the development of a building design.
• Liaising positively & actively with clients, consultants & authorities using his/her technical expertise to adopt / accept / approve the technical proposal for the projects.
• Ensure the design process recognises current legislation, standards and codes of practice.
• Ensure the design information is of the right quality and keeps pace with project timescales.
• Strive to eliminate health and safety risks in the design and financial risks during construction.
• Preparing detailed investigation report for any incidents related to technical issue.
• Review with the Business Development team on project closing reports and develop future improvement plans / strategies to reduce risk(s).
• Be involved in society work, including writing papers to seminars.
• Design D&B solutions, including solutions for ground improvement where relevant.
• Lead, develop and provide training to the team of Engineers.
• Provide technical marketing of solutions to clients and consultants.
• Conduct regular site visits to train and create buy-in from site personnel to promote quality and good practices.

This role may require travel to overseas offices to participate in global expertise groups occasionally.

Requirements

• PEB-recognised bachelor's degree in Civil Engineering or higher.
• At least 10 years experience in a geotechnical design role in the construction industry.
• Experience with PLAXIS will be advantageous.

What We Offer

• Annual Leave, Medical Insurance, Medical Leave, Variable Bonus, Learning & Development Opportunities, Referral Rewards & Employee Assistance Programme
• Global & Regional networking opportunities
• Friendly team and enjoyable working environment

We encourage applications from the right candidates regardless of age, gender identity, sexual orientation, religion, belief or race. Learn more about Keller's Inclusion Commitment at https://www.keller.com/how-we-work/diversity-equity-and-inclusion

Find out more here:

https://www.kellerasean.com/

The School of Mechanical and Aerospace Engineering (MAE) is one of the top 7 mechanical and aerospace engineering schools in the world. With well-established industry partnerships, MAE provides an active and vibrant research environment with excellent R&D infrastructure and numerous opportunities for research funding. The school has an enrolment of over 2500 undergraduate students with over 90 faculty members and 140 full-time research staff working in well-equipped state-of-the-art laboratories. A growing research student population of over 400 is also actively engaged in strategic research and development work. We invite highly qualified candidates in the following expertise areas to join its dynamic team of faculty.

• Smart Engineering Design and Innovation

Candidate Profile:

• Possess relevant Bachelor and PhD degrees from reputable universities.
• A good research track record, and postdoctoral experience would be advantageous.
• Relevant industry experience with a passion for education
• Expertise in the following areas, design informatics, smart product design, artificial intelligence in design, virtual product development, intelligent design ontology, design for the flexible adoption of new technologies, design automation for digital manufacturing and digital twins, will be advantageous.
• An excellent teaching record at either undergraduate or graduate levels
• Track record of translational research work with industry relevance would be preferred.

Successful candidates are expected to teach at both undergraduate and graduate levels, supervise graduate students and undergraduate projects. Candidates on tenure-track would also be expected to acquire research funding and conduct research.

We Provide:

• An active and vibrant research environment
• Excellent R&D infrastructure and opportunities for research funding
• Well-equipped state-of-the-art laboratories
• Attractive research start-up grants and PhD student scholarships
• A competitive remuneration package and attractive benefits

To Apply:

• Applicants are invited to submit their applications (cover letter and CV) through the NTU career portal, https://ntu.wd3.myworkdayjobs.com/en-US/Careers/job/Assistant-Professor-in-Smart-Engineering-Design-and-Innovation_R00011873-1

We are looking for a Senior Geotechnical Design Engineer with at least 4 years’ experience in geotechnical design, analysis and writing technical proposals. The Senior Geotechnical Design Engineer should also be proficient in the use of Plaxis 2D and 3D, as well as in their knowledge of soil mechanics.

Reporting to the Design Manager, you will have the opportunity to collaborate with the Business Development Team to provide design support for tenders. You will be expected to review tender specifications, requirements and draft the technical proposals. Likewise, you will be working closely with the Operations team to perform design-related coordination work, analysing geotechnical issues at project sites, and preparing detailed drawings for the site team. Finally, you will be expected to guide and train junior engineers.

To be successful as a Senior Geotechnical Design Engineer, you should be independent, demonstrate strong analytical thinking and be able to have prompt, open and direct communications with internal and external stakeholders to achieve project expectations. Outstanding candidates should be meticulous, detail oriented, demonstrate willingness to learn and display a positive attitude with a drive for results.

Think you’ve got what it takes?

A day in the life of Senior Geotechnical Design Engineer

Design support for tenders:

• Review and summarize soil condition reports, tender specifications and requirements.
• Identify and summarise geotechnical problems and technical risk.
• Analyse geotechnical problems and draft technical proposal.

Design-related coordination work for ongoing projects:

• Perform analysis and design in accordance with current legislation, standards and codes of practice
• Guide and train junior engineers
• Prepare detailed construction drawings with the assistance of draughtsperson.
• Conduct regular site visits to integrate design concept and actual ground conditions.
• Quality Control (QC) review and verification between design assumptions and actual site conditions.
• Carry out geotechnical analysis and design using tools such as Slope/W and Plaxis as well as Keller’s in-house software.
• Conduct back analysis and research for future improvement based on actual performance and as-built data.
• Prepare technical proposal for remedial work during construction when required.
• Liaise with clients/consultants/ sub-contractors on technical related issues.

Note: This role requires candidates to perform regular site walks at outdoor construction sites

You will need:

• A professional degree in Civil or Geotechnical Engineering
• At least 4 years of relevant working experience in Geotechnical Engineering
• Proficiency in Microsoft Office (Excel, Word, Powerpoint), AutoCAD, Plaxis 2D and Plaxis 3D
• A valid Supervise Construction Work for WSH certificate (preferable)

What We Offer:

• Annual Leave, Medical Insurance, Medical Leave, Variable Bonus, Learning & Development Opportunities, Referral Rewards & Employee Assistance Programme
• Global & Regional networking opportunities
• Friendly team and enjoyable working environment

We encourage applications from the right candidates regardless of age, gender identity, sexual orientation, religion, belief or race. Learn more about Keller's Inclusion Commitment at https://www.keller.com/how-we-work/diversity-equity-and-inclusion

Find out more here:

https://www.kellerasean.com/

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Daily duties involves (but not limited to)

Design the new product as per the client requirement (SS / MS / Aluminium)

Ensure the laser machine schedule is followed as per the client / company requirement

Mantain the laser machine, bending machine, other machineries to its standard

Knowledge in laser machine is a MUST qualification to apply this job

- Bachelor degree in Civil Engineering

- 5+ years in design of pump system solutions, sanitary and plumbing solutions

- Soft skills - MS word, email, Acad

- Client handling and progress claims

- Liaision with sub-contractors

- Handling work crew

- Preparation of proposals and submission to client

- Sincere and dedicated candidate

Responsibilities & Requirements

· Engineering or Diploma with minimum 5 years’ experience in Mechanical Engineering

· Minimum 3 years’ experience in handling engineering drawing

· Software Skill: 2D knowledge in AutoCAD, and 3D knowledge in Solidworks

· 2-3 years’ experience in sheet metal development and fabrication knowledge

· Knowledge in various process for component making

· Understanding bill of material as stated in assembly drawing

· Knowledge in various material and its manufacturing ability

· Project follow up with production team

· Work with different department to follow up process to end product

· Strong organizational skills

· Excellent attention to detail

· An abundance of patience to see a complicated project to end

· Ability to think in a three-dimensional manner

· Comfortable with sitting for long periods of time

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Responsibilities:

• Structural design and checking; submission of structural drawings and liaise with government authorities; co-ordinate with site project teams; attend site meetings with clients and contractors.

• Assist Director or Senior Engineer on reviewing and provide solutions to technical problems as well as plan, monitor and report work progress of the construction/project.

Requirements:

• We need Junior and Mid-level Engineer to fill up the positions.

• Minimum 3 to 5 years of relevant working experience in consultants office.

• With Knowledge in Euro Code

• Min. Degree in Civil Engineering recognized by P.E.Board

• Effectively bilingual

• Be familiar in Prokon, Orion, TSD, Etabs, ZWCad softwares will be an advantage.

• Be independent, analytical, highly motivated with excellent team spirit and interpersonal skills.

Interested candidates, please send your resumes online with the following details:

• Availability & related work experiences

• Current/last drawn salaries

• Expected salary

• Position applied for

We regret that only short listed candidates will be notified

Job Title: Design Architect (Design & Architecture)

Location: Jurong East, Singapore

Overview: Chariots Capital is a dynamic start-up company revolutionising the Design & Architecture industry in Singapore. Committed to creativity, excellence, and client satisfaction. we are seeking a seasoned Design Architect to lead our Design & Architecture projects across commercial spaces, landed properties, and residential projects. This is an exciting opportunity to join a fast-paced start-up environment and play a key role in shaping the future of Design & Architecture industry in Singapore.

Position Overview: We are seeking a talented and creative Design Architect to join our team. The ideal candidate will have a passion for design, a keen eye for detail, and the ability to transform conceptual ideas into stunning architectural realities. As a Design Architect, you will play a key role in all phases of the design process, from initial concept development to construction documentation. You will collaborate closely with clients, project managers, and fellow team members to deliver innovative and inspiring architectural solutions that align with our clients' vision and exceed their expectations.

Key Responsibilities:

· Involve in business development meetings and networking sessions.

· Lead the design process from concept development through to construction documentation.

· Create innovative and aesthetically pleasing architectural designs that reflect the unique vision along with the ability to align with clients’ requirements.

· Develop detailed architectural drawings, renderings, and presentations using industry-standard software.

· Collaborate closely with clients, project managers, and consultants to ensure every design objectives are met, completion within project timelines and budget.

· Conduct site visits and inspections to ensure construction progress meets design intent and quality standards.

· Stay abreast of emerging trends, technologies, and best practices in architecture and design.

· Mentor junior staff members and provide guidance and support as needed.

Qualifications

· Bachelor's or Master's degree in Architecture from an accredited institution, registered with the Board of Architects, Singapore

· Minimum of 5 years of experience working in an architectural firm, with a focus on high-end residential, commercial, or hospitality projects.

· Proficiency in AutoCAD, Revit, V-ray SketchUp, Adobe Creative Suite, and other design software will be advantageous

· Strong design sensibility and ability to develop innovative and compelling design concepts.

· Excellent communication, presentation, and interpersonal skills.

· Ability to work effectively in a collaborative team environment.

· Knowledge of sustainable design principles and LEED accreditation is a plus.

· Professional licensure or eligibility to become licensed is preferred.

· Working rights required for this role.

· Preferably able to start work immediately.

Benefits:

• Attractive and competitive salary commensurate with experience and qualifications with sales-based incentives.
• Collaborative and inclusive work environment.
• Collaborative and entrepreneurial work culture.
• Opportunity to make a significant impact and drive growth within a growing Design & Architecture SME.

If you are a dynamic and experienced Design Architect with a passion in the Design & Architecture industry with a proven track record of success, we invite you to apply for this exciting opportunity.

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills

Responsibilities:

• To be lead engineer or assistant lead engineer in new shipbuilding or ship repair/retrofit projects
• Provide specialist technical advice and information to internal and external parties
• Prepare detailed design drawing using 3D modelling tools, such detailed design drawing could include ducting design and necessary design document to enable production of prototype for product development
• Review and approve detailed design drawings and documents e.g., piping isometrics, piping layout, ducting arrangement, equipment foundation, equipment installation, machinery room layout, bill of materials and various mechanical outfitting drawings, and ensure that the deliverables meet contractual technical specification and Classification Society’s requirements
• Ensure the detailed design drawings and documents have met the standards set by the department and provide further input for improvement
• Update 3D software database on a regular basis to ensure correctness and consistency of component’s engineering attribute.
• Manage external consultants in engineering integration and deliverables
• Coordinate and lead a team of engineers to ensure timely and accurate engineering deliverables
• Participate in tests and sea trials, where required
• Liaise with ship owners and Classification Societies to obtain approval on engineering deliverables.
• Resolve technical issues raised by ship owners and Classification Societies
  

Requirements:

• Bachelor’s Degree with Honours in Mechanical/Marine/Offshore/Naval Architecture
• At least 5-8 years experience in engineering design on HVAC (Heating Ventilation and Air Conditioning) system
• Good working experience with HVAC turnkey contractor, HVAC equipment supplier, Shipyard HVAC related department
• Well-articulated in presentations to both clients and senior management, with good command of English, both spoken and written
• Strong leadership with project management and interpersonal skills

Knowledge and Skills:

• Strong knowledge of HVAC marine international design codes, Classification/Statutory Rules and Regulations.
• Engineering and design project management skills.
• Software (preferred): AVEVA Marine, AutoCAD or similar functions
• Software (need basis): VA One, Star CCM+, Aveva PID, Pipeflow Expert

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Job Description

• Responsible for planning, scheduling, conducting and coordinating the technical issues related to projects.
• Check the materials and work in progress to ensure compliance with specified requirements and safety regulations.
• Supervise and manage projects
• Lead and coordinate with the clients, sub-contractors, site engineers, site supervisors, project manager and workers to ensure smooth progress of site works.
• Reporting site progress to HQ Quantity Surveyor.
• Prepare, plan and submit project documents such as RA, MOS, SWP & etc.
• Ensure job safety analysis and site safety compliance.
• Any other ad-hoc tasks assigned.

Job Requirements

• At least 5 Years of working experience in a related field is required for this position.
• Highly proactive attitude
• Self-motivated
• Strong team player
• Excellent problem-solving skills
• Effective communication skills

Job Description

Role and Responsibilities:

• To be part of a team of ESD architects/engineers to work on Environmental Sustainable Design (ESD)/ Green Mark /Green Building Index (GBI)/ LEED/ WELL projects
• To manage projects related to overall sustainability, decarbonization and carbon advisory
• To provide high level energy analysis and benchmarking energy consumption against best practices guideline and net zero roadmap for master planning in Singapore and overseas
• To provide cost-effective solution to project teams for improving building performance, decarbonization and sustainability
• To research on, review, recommend and implement industry best practices in sustainable building design and system

Qualifications

• Bachelor’s or Master’s degree in M&E, Architecture, building serves, building sustainability or a related field
• Minimum of 3 years of professional ESD experience in ESD
• Process a strong knowledge on common energy analysis/benchmarking, Excel-based energy calculation and energy modeling software, with a specific focus on IESVE or EnergyPlus
• Good understanding of building system, particularly in ACMV system and other M&E disciplines
• GMAP, LEED AP, WELL AP or credentials in related areas will be considered an advantage, as will the ASHRAE BEMP certificate (building energy modeling professional)
• Experience with modeling support software such as Open Studio and Rhino is desirable
• Project management skills with ability to actively manage and balance task, cost and time
• Team player with the ability to work as a team, willing to learn, contribute ideas and assist team member with tasks/duties, when required
• Highly self-driven and pro-active with a keen interest for exploring innovative solutions
• Broad based experience of computer systems and MS Office applications

Responsible to generate detailed, scaled casing connector drawings, prepare engineering work instruction and procedural specifications, provide technical support to sales function, supervise junior product engineers for day to day work order preparation and perform other assigned duties as and when required. Work scope covers all locations across the region.

Responsibilities:

Tender

- Evaluate tender requirements and translate them into technical specifications
- Evaluate propulsion system and piping systems that best meet tender requirements
- Formulate scope of work for contract
- Do material estimate for conversion tendering
- Do technical evaluation of equipment supplier proposals

Contract Drafting and Negotiation
- Participate in contract negotiations
- Negotiate scope of supply and services with suppliers
- Formulate equipment technical specifications for contract with suppliers

Design
- Technical discussion with equipment suppliers on system specifications
- Evaluate completeness and correctness of technical information from supplier
- Design engineering layout drawings based on customer's requirements
- Design engineering equipment layout drawings based on contractual requirement and inputs from other trades
- Design propulsion system, ship pining systems & HVAC based on contractual requirement, classification rules and inputs from other trades.
- Tabulate material and equipment list based on propulsion system drawings and piping, HVAC system drawings.
- Plan, manage, produce, and issue drawings to production and other trades to meet project schedule.
- Evaluate technical information of designing systems.
- Plan, organise and discuss engineering systems design with customer.
- Involve in technical discussion with other trades to resolve technical issues.

Test and acceptance
- Review acceptance test protocols
- Manage and do acceptance of system’s equipment during Factory Acceptance Test (FAT) to ensure it meets technical specification.
- Attend and support Harbour and Sea Acceptance Test (HAT & SAT) to ensure systems meet technical specifications

Documentation control
- Manage documents control for the department according to standard and practice.

Requirements:

• Degree in Marine, Mechanical Engineering or related discipline.
• Have knowledge of Marine Engineering systems design, preferably 3-5 years of direct experience.
• Possess knowledge of AutoCAD / 3D solidworks software.
• Good organisational skills, teamwork and interpersonal skills.
• Good time management and is able to meet tight deadlines
• Willing to do overtime when required

Other Information:

• Location: Tuas Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Job Requirements

· Lead Process Design Engineer for the Process Design of Storage Terminals, Process Units in Refineries and Chemical Plants which involves the Basic and Detail Design including the preparation of PFDs, P&IDs, System Description, Process Control Philosophy, Hydraulic Calculation, Heat Transfer Calculation, Heat & Material Balance, Relief System Calculations, Utility Consumption, Equipment data sheets & Instrument data sheets.

· Prepare Technical Proposals including preparation of PFDs, P&IDs, hydraulic calculations and system description.

· Design Calculations for Pumps, heating coils, Thermal Relief valves and Tank venting calculations.

· Analyze pressure relief design scenario and calculate the relief load and validate the results

· Prepare Process Data Sheets for Instruments, Equipments & Tanks.

· Review other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc.

· Participate in HAZOP and SIL study, Review HAZOP Report and prepare HAZOP & SIL Close-out reports.

· Participate in P&ID Design Review and Process Control Philosophy Review, and prepare review Close-out reports.

· Design of Fire Protection System as per NFPA for the Storage Terminal, which includes Tank Farms, Pump Stations, Jetties, Truck Loading Bays

· Design of wastewater collection and disposal system for the Storage Terminal which includes Tank Farms, Pump Stations, Jetties, Truck Loading Bays

· Prepare Surge Analysis report using Pipenet Transient Module.

· Development of automated excel spreadsheets for process calculations.

· Performing Simulation using Aspen HYSYS & Unisim

· Preparation of simulation report & HMB.

· Equipment Sizing and Preparation of Equipment Data sheets.

· Preparation of technical specification in line with the project requirements

· Performing Hydraulic calculation and preparation of Data sheets for control valves.

· Performing Relief load calculation and preparation of Data sheets for safety valves.

· Design of Flare system using Flarenet.

· Utility sizing and Preparation of Utility Consumption report.

· Preparation of Process Control Philosophy & Cause and Effect diagram.

· To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

· To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Chemical)

Experience

Preferably 10 years’ experiences

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word

3) Smart Plant P&ID

Code Knowledge

1) API 2000, API 520, API 521, API 526, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Introduction

The Renaissance Engineering Programme is NTU’s flagship engineering programme that aims to nurture engineering leaders with an entrepreneurial spirit to serve society. The programme covers a broad spectrum of multidisciplinary subjects bridging engineering, business and humanities.

The incumbent will work closely with faculty members to manage efforts in the use of learning technology in both online and offline learning environments and to support the team-based learning pedagogy for REP courses.

Responsibilities

Manage Team-based Learning (TBL) for REP courses

• Facilitate TBL sessions using software and providing in-class support
• Work with curriculum experts and faculty to ensure that the TBL materials that are developed are aligned to the learning outcomes of the relevant modules
• Provide curriculum support to faculty in the area of using different technology mode for the lesson plan
• Engage faculty to explore possibilities of TBL development for their courses and recommend approaches and solutions for the courses

Communication and outreach

• Work closely with student/alumni ambassadors and relevant departments on external university-wide outreach events and activities
• Assist with the various communication and publicity materials e.g, e-newsletters, e-brochures, videos

General safety and facilities management

• Act as the safety representative for the department and be in charge of safety communications
• Provide facilities support, including maintenance, for teaching facilities to ensure compliance with safety standards

Requirements

• Possess Bachelor Degree in related disciplines (such as Learning or Education Technology, Business Administration etc)
• Good knowledge of online course production for educational environment
• Has minimally 3 years of relevant experience in educational technology and instructional design, preferably in an academic administrative role in a tertiary institution
• Has experience with the use of instructional technology within a variety of curriculum and subject areas and familiar with the use of online learning technologies
• A self-starter who is resourceful, committed and has strong interpersonal skills
• Strong verbal and written communication skills
• Good project management experience and able to multi-task in a fast-paced environment

Nanyang Technological University (NTU) invites applications for a position of Assistant Professor/Associate Professor (Tenure-track) in “High-frequency III-Nitride Growth, Device design and Fabrication”.

We are seeking a candidate who will develop, lead and sustain research of an international standard in “High-frequency III-Nitride Growth, Device design and Fabrication”. The candidate should possess strong experimental and theoretical expertise in III-Nitride growth and/or device design and fabrication for devices (e.g. HEMTs, MISHEMTs, FinFETs etc.) for high-frequency applications.

This position will be held at the School of Electrical and Electronic Engineering. Areas and priorities that we wish to develop and support through this appointment include:

• III-Nitride epitaxial growth on various substrates (Si, SiC, Sapphire etc.) using MOCVD.
• III-Nitride epitaxial wafer characterisation techniques (e.g. Hall, XRD, PL etc).
• Design of advanced III-Nitride device structures particularly for high-frequency (microwave and millimeter-wave) applications.
• Semiconductor wafer fabrication processes including III-V compound semiconductor and/or CMOS-compatible wafer fabrication techniques.
• Electrical characterisation of devices including DC and RF techniques (e.g.semiconductor parameter analyser, pulsed I-V, small signal and large signal RF measurements, etc.)

Responsibilities

• Develop and lead an innovative research programme of international quality.
• Publish high impact papers in reputable peer-reviewed journals.
• Secure competitive research grants.
• Give talks at international conferences and supervise research personnel.
• Contribute to teaching and course development at the undergraduate and postgraduate levels.
• Supervise undergraduate and postgraduate students undertaking research projects.
• Undertake administrative and/or leadership roles.
• Contribute to other service-related activities assigned by School and University.

Requirements

Knowledge and Qualifications

Essential:

• PhD in III-Nitrides or a related discipline
• Extensive knowledge of current research within the fields of III-Nitrides epitaxial growth, device design, fabrication and characterisation.
• Evidence of developing international reputation in this field of research, for example fellowships, awards, invited presentations at international conferences, journal editorships or otherwise.
• Established track record of academic publications of international quality.
• Proven track record of securing funding as Co-I or lead investigator.

Desirable:

• Membership of relevant discipline or professional body/learned society.

Skills

Essential:

• Ability and drive to develop project activities in one or more of the fields detailed above.
• Excellent communication and presentation skills, both oral and written.
• Excellent interpersonal skills, including the ability to enthuse students.
• Time/project/budget management skills.
• Self-motivation and ability to work independently and as part of a team.
• Ability to secure research grant funding and initiate new projects; lead a research team and develop an international research profile.
• Ability to work in collaboration with colleagues.

Desirable

• Ability to take on a leadership role and motivate students.
• Ability to accept collegiate responsibilities and act accordingly.
• Significant research leadership and facilitation skills.
• Demonstrable ability to provide strategic contribution at Subject or School level.

Experience

Essential:

• Strong track record of relevant research and broader academic experience.
• Experience in successful teaching, tutoring and mentoring of research students and undergraduate students.
• Experience as PI or key contributor of external research grants.
• Strong and growing reputation for research leadership in an area which will broaden and strengthen the School’s research activities.
• Experience in leading successful research grant applications, collaborations and in managing projects.
• A strong track record of gaining research funding.
• Significant broad teaching experience at undergraduate and postgraduate level.

Desirable:

• Experience in curriculum development, marking and assessment.
• Experience of supervision of higher degrees (PhD).
• Experience in cross-disciplinary research initiatives, and international/industrial collaborations.

Application

Applicants are invited to submit their applications (cover letter, CV, research and teaching statements, and citation report, where applicable) through the NTU career portal.

Review of applications and shortlisting of applicants will be carried out on an on-going basis until the position is filled. Only shortlisted candidates will be notified.

Are you a budding digital marketing enthusiast eager to dive into the world of interior design? Do you have a passion for online engagement and a hunger to learn and grow on the job? If you're ready to embark on an exciting learning journey, we invite you to join us as a Digital Marketing Executive in the Interior Design industry.

Company Overview:

At Dailyceed Design Studio, we believe that every space has a story to tell. As a well-established interior design firm, we specialize in creating narratives through design that resonate with our clients. We're on the lookout for a Digital Marketing Executive to not only assist in our online efforts but also to immerse themselves in the art of design while honing their digital marketing skills.

Position Overview:

As a Digital Marketing Executive, you'll have the unique opportunity to learn and contribute simultaneously. You'll work closely with our experienced marketing team and collaborate across departments to help shape our online presence. This role is designed for someone who's excited to roll up their sleeves, absorb industry insights, and make a real impact on our brand's journey.

Responsibilities:

• Support the creation and execution of digital marketing campaigns that tell our design stories and attract potential clients.
• Assist in managing our social media platforms by curating content and engaging with our audience.
• Learn to craft and deploy email marketing campaigns that nurture leads and maintain client relationships.
• Contribute ideas and assist in generating visual and written content for our online channels.
• Monitor and gather insights on the performance of digital marketing initiatives, and contribute to strategy adjustments.
• Stay curious and keep up-to-date with industry trends and digital marketing advancements.

Qualifications:

• A passion for digital marketing and a keen interest in interior design.
• A degree in Marketing, Communications, Digital Media, or related field is a plus, but not necessary
• While experience is beneficial, we value eagerness to learn and grow over previous roles.
• Basic understanding of social media platforms, content creation, and online engagement.
• Excellent written and verbal communication skills.
• Enthusiastic and collaborative attitude within a team-driven environment.
• Strong analytical mindset and willingness to adapt strategies based on data