Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 5 years of ASIC design experience preferred.
• Familiar with ASIC design flow
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting
• A team player with good communication skills
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 8 years of ASIC design experience preferred.
• Familiar with ASIC design flow
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting
• A team player with good communication skills
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

We are looking for a candidate for high-speed analog and mixed-signal integrated circuit design. This candidate will contribute to the development of high-speed silicon photonics transceiver for next generation wireline communication system. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications.
• Design and tapeout ICs which include state-of-the-art circuit blocks e.g. analog-to-digital converter, equalizers (CTLE, DFE) as part of the high-speed data link system.
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electrical Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog and mixed-signal IC design methodologies and successful tapeout experience
• Familiar with analog and mixed-signal IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

We are looking for a candidate for high-speed analog and mixed-signal integrated circuit design. This candidate will contribute to the development of high-speed silicon photonics transceiver for next generation wireline communication system. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications.
• Design and tapeout ICs which include state-of-the-art circuit blocks e.g. analog-to-digital converter, equalizers (CTLE, DFE) as part of the high-speed data link system.
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electrical Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog and mixed-signal IC design methodologies and successful tapeout experience
• Familiar with analog and mixed-signal IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

We are looking for a self-motivated candidate with expertise in high performance digital design, DSP and mixed signal modeling join our cryogenic CMOS-based quantum control project. This candidate will work closely with our digital and analog design team as well as with the local physics and material designers to develop low-power, high fidelity and highly scalable control and read-out SoC for superconducting qubit-based quantum computing applications.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to co-optimization between on-chip memory and DSP design and analog front-end (i.e. DAC, BPF, Mixer, LNA and ADC) to ensure high quantum control/readout as well as to optimize power consumption per channel

o Emphasize system-level perspective in the design process, considering overall system architecture and functionality

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments

o RTL implementation for custom circuit design using Verilog/SystemVerilog with focus on DDS, Filter and Error Correction Code

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of mixed signal designs to validate quantum control fidelity and digital-analog interface throughput

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure

• Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II
• Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture
• Prepare detailed design documentation, including specifications, test plans, and reports
• Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues
• Bring creative and innovative solutions to design challenges. Stay abreast of industry trends and emerging technologies
• Test and verify fabricated chip using FPGA and other lab equipment such as logic analyzer and oscilloscope

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 3 years of ASIC design.
• experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

We are looking for a candidate for high-speed analog integrated circuit design. This candidate will contribute to the development of high linearity silicon photonics modulators for 6G and beyond communication systems. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications
• Design and tapeout ICs which include state-of-the-art circuit blocks, e.g. wideband linear low-noise amplifier and transimpedance amplifier with a focus on circuits interfacing with silicon photonics elements
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electronic Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

Responsibilities:

• Collaborate closely with the Project Director and multidisciplinary teams to develop innovative design solutions, from concept through to construction.
• Manage project and design processes, ensuring timely delivery and adherence to deadlines, budgets, and regulatory requirements.
• Supervise and review drawings to ensure design constructability, contributing to firm-wide design excellence and problem-solving.
• Demonstrate creative thinking abilities and contributes to firm-wide design excellence and problem solving.
• Provide influencing ideas to enhance team productivity.
• Collaborate with project managers to execute design visions within project constraints, including timelines, budgets, and regulatory requirements.
• Ensure project filing is accordance to officewide standard system.
• Incorporates integrated sustainable design solutions into projects.
• Participates in managing client relationships and representing Company Brand when meeting with clients and other consultants.
• Attend presentations and meetings with client, consultants, and key stakeholders.
• Understands company agreements, contracts, and deliverables, and assures that company standards for project management are met.
• Contribute to the firm's promotion by participating in professional organizations and events, including international travel for project meetings, site visits, and business development as necessary.

Requirements:

• Bachelor's or Master's degree in Landscape Architecture, Architecture, or related field from an accredited institution.
• 7 to 10 years of professional experience in landscape architecture or related design field, demonstrating creative excellence.
• Proficient in AutoCAD, Revit, Adobe Creative Suite, SketchUp, Rhino; familiarity with BIM (Building Information Modeling) is a significant asset.
• Exceptional verbal and written communication skills, able to present concepts clearly and persuasively.
• Strong teamwork and interpersonal abilities, with experience in multidisciplinary collaboration.
• Professional licensure preferred but not required.

Job purpose:

Assist in the maintenance of accounting principles, practices, and procedures to ensure accurate and timely financial statements

Job description:

• Handle full set of Account (AP/AR/GL) using Odoo.
• Prepare monthly financial Statements, management reports and other reports for fixed Asset, Stocks, Bank, Schedules etc.
• Handle day-to-day accounts activities.
• Handle any ad-assignments assigned by Director and Accountant

Requirement:

• Minimum Diploma in Accountancy
• 2 years’ relevant working experience in preparing full sets of accounts preferred

Muzart Beauty World Centre is looking for a Part Time art Teacher. The candidate should have a portfolio (personal/school) as well as enjoy engaging and connecting with children aged 4-10 years old. She should have a cheerful personality and must be able to speak and update parents well after class.

Curriculum and training will be provided.

Classes are 1.5h each and we will try to provide back-to-back classes to make your time worthwhile.

Requirements

- Weekend availability a must

- Some Weekday afternoons (optional)

- Art Students/Graduates from Art schools welcome

- Passionate art lovers without formal art education may also apply if portfolio meets requirements

Salary: $12/h

WhatsApp 96855952 with CV & portfolio.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

• The candidate is responsible for the design of highspeed wireline transmitter >100Gbps.
• The candidate needs to work on the system architecture, schematic design, and mask layout.
• He/she also needs to perform pre and post-layout simulation to ensure the functionality and performance.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

• The candidate is responsible for the design of highspeed wireline receiver >100Gbps.
• The candidate needs to work on the system architecture, schematic design, and mask layout.
• He/she also needs to perform pre and post-layout simulation to ensure the functionality and performance.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.

We are hiring Junior/Senior Interior Designers !

Drop us an email with your resume today!

Email: [email protected]

Responsibilities:

• understand homeowner requirement and propose space planning with layout and material
• draw in 2D AutoCAD & 3D Sketch Up
• responsible to work out quotation
• responsible to supervise work progress and meet the timeline
• responsible to liaise with suppliers and subcontractors in order to have good quality works

Requirements:

• O level(Min), Diploma, Degree/Bachelor
• Min 1 years’ experience in interior design or construction project management or related experience
• Strong problem solving and analytical skills
• Able to converse in English and Mandarin(in order to handle queries and concerns from English and Chinese speaking counterparts in regards with the interior design related matters.)
• Creative, independent, self-discipline, willing to learn, love to talk to customer and meticulous
• Good communication and like to do presentation, able to meet client at weekend and public holidays

Why join us?

• SIDA Best Design Award Winner
• Qanvast Top 3 Interior Design Firm
• SuperTrust Award Winner Interior Design Firm
• Well-Known Boutique Interior Design Firm
• New 3500sf Design Show Room
• Plenty of opportunities to grow as a pioneer in our company
• Salary based or Profit sharing based

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 8 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterpart

1. Perform piping design and pipe support design.

2. Interpret and develop PFD & P&ID.

3. Apply international standard and practices such as ASME, ANSI code. Familiar with pipe / tank specifications, nozzle specifications and orientation of nozzles.

4. Perform Material Take Off (MTO) from piping drawings.

5. Perform pipe stress analysis and surge analysis.

6. Responsible for reviewing of piping/mechanical documents and specification from clients and consultants.

7. Responsible for review and check of all piping/mechanical documents and drawings from vendors and suppliers.

8. Prepare technical datasheet and specification.

9. Co-ordinate with engineers of either disciplines within the department.

10. Liaise with clients, consultants, sub-contractors to resolve technical issue at site or in office.

11. Lead and interface within inter-disciplines for all technical matters.

12. Pre-procurement preparation including evaluation of technical and commercial bid from vendor and supplier.

13. To provide engineering support in tendering of new project such as preliminary design, material and cost estimates etc.

14. Provide technical support to project team for on-going projects and resolve any technical issue on site.ue on site.

• To carry out electrIcal related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out electrical calculation for the design
• Responsible for reviewing of electrical documents and specification from clients and consultants
• To check and review all electrical related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 5 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

• To carry out instrumentation related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out instrumentation calculation for the design
• Responsible for reviewing of instrumentation documents and specification from clients and consultants
• To check and review all instrumentation related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim.

Job Highlights

• High Commission Base
• Sales Incentives
• Performance bonus and Company Trips
• Sales training provided
• Leads provided
• Start ASAP

Job Description

ROCKSTAR IS HIRING & WE WANT YOU TO SUCCEED! ROCK IT ON!!!

• Fully Commission Based
• High Commission & Sale Incentives
• Positive learning attitude and takes pride in your work
• Able to work efficiently and calmly under pressure
• Willing to learn more about Interior Designing
• Highly Motivated & Sales Target Driven
• Highly Customer-oriented with excellent communication skills
• Highly Responsible & Reliable
• Independent with sales-target driven mindset
• Training can be provided
• Dealing with residential and commercial or others

Requirements -

• Individuals with good communication skills
• Creative and have passion in Interior Design
• Self-motivated and sales target driven
• Responsible, proactive & good work attitude
• Able to work in a team and individually
• Able to visualize concepts and explains the interest in changing trends in design
• Bilingual in English & Mandarin in order to liaise with Mandarin-speaking customers.

Interested candidates are invited to apply online by clicking ‘APPLY NOW’ button below with an updated resume.

Only shortlisted candidates will be notified.

Thank you for applying.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Job Highlights

• High Commission Base
• Sales Incentives
• Performance bonus and Company Trips
• Salea training provided
• Leads provided
• Start ASAP

Job Description

ROCKSTAR IS HIRING & WE WANT YOU TO SUCCEED! ROCK IT ON!!!

• Fully Commission Based
• High Commission & Sale Incentives
• Positive learning attitude and takes pride in your work
• Able to work efficiently and calmly under pressure
• Willing to learn more about Interior Designing
• Highly Motivated & Sales Target Driven
• Highly Customer-oriented with excellent communication skills
• Highly Responsible & Reliable
• Independent with sales-target driven mindset
• Training can be provided
• Dealing with residential and commercial or others

Requirements -

• Individuals with good communication skills
• Creative and have passion in Interior Design
• Self-motivated and sales target driven
• Responsible, proactive & good work attitude
• Able to work in a team and individually
• Able to visualize concepts and explains the interest in changing trends in design
• Bilingual in English & Mandarin in order to liaise with Mandarin-speaking customers.

Interested candidates are invited to apply online by clicking ‘APPLY NOW’ button below with an updated resume.

Only shortlisted candidates will be notified.

Thank you for applying.

• Support the Technical section in the Power and Renewables team for the development of Renewable Generation Projects
• Perform site assessments and evaluate engineering designs for ground mounted solar projects throughout the project lifecycle
• Follow up on the detail engineering phase with selected partners, ensuring compliance with Technical Specifications and relevant legal requirements of the Renewable Generation Projects
• Support the execution of Renewable Generation Projects with strict compliance of HSE, Environmental, Quality and Keppel relevant policies
• Supervise and oversee the on-site construction and commissioning processes to ensure the projects meet the design specifications
• Provide technical input for Operation & Maintenance activities (such as O&M manual, solar monitoring setup, etc.)
• Stay abreast of industry trends, new technologies, and best practices to improve project delivery continuously
• Ensure proper coordination between the Renewable Generation Projects and the rest of the Keppel stakeholders involved in the development of the Power Generation and Transmission Projects
• To undertake additional duties and responsibilities as deemed necessary

Requirement

• A Diploma in Electrical or Energy Engineering
• Strong technical knowledge of electrical engineering principles, including AC and DC systems
• Proficiency in industry-standard design tools, such as PVsyst, Helioscope, SolarGIS, and Homer Pro
• Proficiency in AutoCad
• Detailed knowledge and experience of modern Health, Safety and Environmental practices
• Good understanding, technical knowledge and experience in the Design and/or Construction of large-scale ground mounted Solar PV Power Project

Period of work: March - May 2024

Responsibilities:

1. Create communication materials such as flyers, posters, menus, brochures advertisements for various events, activities and promotions
2. Work closely with other departments to conceptualise, develop and produce suitable marketing and publicity material
3. Provide photography assistance for F&B promotions and other purposes
4. Liaise with vendors for production of print materials
5. Manage and update the website and Plasma TV as needed
6. Provide logistical support for the Annual General Meeting

Any other duties as assigned from time to time.

Requirements:

1. Min Diploma in Graphic Design/ Multimedia or equivalent
2. Proficient in various graphics, multimedia and digital design tools eg. Photoshop, Freehand, PageMaker, FrontPage, Illustrator, Flash etc
3. A teamplayer with excellent artistic and creative design skills
4. Able to work independently with initiative and a good eye for details, highly meticulous and observe all deadlines.