. JOB DESCRIPTION

Job Title

Carpentry production manager

Occupation

Supervisor and General Foreman (Furniture and Related Products Manufacturing)

Job Description & Requirements

Roles & Responsibilities

Must have at least 5 years experience

Must follow instruction and hard working and cooperative

Liaising with clients, suppliers and other construction professionals

Reading blueprints and designs to work to specifications prepared by other construction professionals, architects and building code recommendations

Starting from cutting and paste to build and install the finished carpentry work at the project site.

Good knowledge with the materials.

Good understanding of the drawings.

Good time management and teamwork spirits.

We are an equal-opportunity employer and value diversity among our teachers, staff and students.

At One World International School (OWIS), we are looking for passionate, adaptable educators who enjoy teaching students from diverse cultures. OWIS provides an individualised approach to learning that nurtures every aspect of child development. In addition to versatile learning spaces and a variety of extracurricular activities, we offer rigorous curricula that prepare students to be future innovators and leaders.

We are an IB Primary Years Programme (PYP) World School, a Cambridge International School and an IBDP School. All teaching positions require a high proficiency in spoken and written English, a degree, teaching qualifications and ICT literacy.

Newly-qualified Teachers are welcome to apply!

One World International School is committed to safeguarding and promoting the welfare of the children. We are committed to recruiting candidates who share this commitment to safeguarding. Before an offer is given, candidates will undergo child protection screening and will be required to provide a Police Verification Check from their country of residence.

If you are looking to work with enthusiastic students from around the world and become part of our dynamic school community, we invite you to submit your application for the following position.

Overall Responsibilities:

• Support the main classroom teacher in the implementation of daily programs to facilitate learning.
• Work with groups of students under the teacher’s direct supervision.
• Supervise the playing of educational games.
• Work with students who have varying degrees of learning support needs.
• Ensure that students adhere to the school’s behaviour policy.
• Prepare work and activities in accordance with the objectives set by the teacher.
• Assist the teacher in helping with the student’s physical needs, whilst also encouraging independence.
• Responsible for the upkeep of teaching resources, prepare art and craft materials, arrangement, appearance, decorations, and learning environment of the classroom
• Use positive discipline techniques at all times.
• Maintain and build relationships with children and parents.
• Being part of the team, you will participate in parents and community engagement activities.
• Give feedback to teachers on students’ progress.
• Any other related duties as requested by the Head of School.

Requirements:

• Be a passionate educator with the ability to deliver inquiry based learning.
• Creative and inspiring with loving energyDiploma/Certificate in Early Childhood.
• Care and Education preferred
• Prior experience in a classroom environment preferred.

Work Location: Punggol Campus

Benefits:

· Ability to garner overseas exposure in EU, USA and Asia due to global business model

· Opportunity to grow exponentially with the company

· Degree of freedom and responsibility to explore innovative ways to bring improvements to the organization

· Attractive bonuses and increments based on individual and company performance

Responsibilities:

· Taking a lead role in creative workshops, generating and visualising your own ideas and those of the team around you

· Production of detailed drawings and manufacturing specifications

· Transfer of designs to manufacture through liaison with external suppliers

· Spending time at design partners and manufacturing sites, acting as the liaison between the company, the design team and the manufacturer to ensure realisation of products

· Troubleshooting manufacturing problems

· Helping develop manufacturing cost models, and iterating this throughout the design process

· Advising design teams on the most suitable manufacturing processes

· Applying your knowledge of manufacturing in a packaging environment to ensure the correct processes are being followed

Qualifications & Requirements:

· Bachelor degree or Diploma in engineering, industrial design, or mechanics tertiary program

· Minimum 5 years relevant working experience in product Design and Development

· Strong in computer aided design, or CAD. Should be comfortable with taking ideas from a conceptual level through detail design

· Able to multi-task well and manage Automation systems project

· Able to demonstrate innovative past projects through a portfolio or simple case studies

· Comfortable in structural analysis, or FEA

· Familiar with design for manufacture, or DFM

· Ideally has experience working with industrial applications of plastic and plastic part design and or test qualification

Personal characteristics:

· Positive and hands-on attitude required for a promising start-up environment.

· Being self-motivated and responsible for the tasks assigned.

· Continuously strive for improvements both for personal and company.

. JOB DESCRIPTION

Job Title

Carpentry production manager

Occupation

Supervisor and General Foreman (Furniture and Related Products Manufacturing)

Job Description & Requirements

Roles & Responsibilities

Must have at least 5 years experience

Must follow instruction and hard working and cooperative

Liaising with clients, suppliers and other construction professionals

Reading blueprints and designs to work to specifications prepared by other construction professionals, architects and building code recommendations

Starting from cutting and paste to build and install the finished carpentry work at the project site.

Good knowledge with the materials.

Good understanding of the drawings.

Good time management and teamwork spirits.

Job duties & responsibilities:

• Provide technical guidance in developing new PCB designs and updating existing designs.
• Develop PCB layouts, perform component placements and determine wire routings.
• Verify existing designs and recommend improvements.
• Recommend new design concepts and validate the concept feasibility using circuit simulations.
• Prepare design documentations, requirements specifications and PCB models.
• Perform PCB design testing and analyze test results.
• Monitor and report project status to Manager on regular basis.
• Attend project meetings to discuss about project progress and issues.
• Ensure that project deliverables meet customer expectations.
• Propose process improvements to ensure PCB functionality, quality and reliability.

Job requirements:

• Diploma / degree in Electrical & Electronics Engineering /Computer Engineering.
• Preferably 1 year of experience in PCB schematic design & PCB artwork design.
• Entry-level candidates with keen interest in PCB design are welcome to apply. Training will be provided.
• Knowledge in Althium, Protel or any other electronics design software would be an added advantage.
• Self-motivated.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 3 years of ASIC design.
• experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 8 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterpart

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 2 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 5 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 5 years of ASIC design experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 5 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 8 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Sales Executives

Art N Craft Printing Pte Ltd

Responsibilities

· Generate sales through various methods (outbound cold calling, door-to-door, presentations, etc.)

· To develop and manage existing client account relationships to increase revenue spend and /or by targeting relevant leads in order to bring in new business

· Achieve Monthly sales target

· Build good relationship with client

Requirements

• Relevant Experience in Local Printing, Design, Media, Advertising Industry
• Established Client base / Portfolio
• Passion and enthusiasm
• Sales & Result Oriented
• Pleasant personality with good communication and interpersonal skills
• Computer Literate
• Liaise with English and Mandarin speaking customers
• Training Provided

Job Benefits

• 5 day work week

• Basic + Commission

Interested applicants, please send resume including availability, recently Photo and expected BASIC salary to: [email protected]

Art N Craft Printing Pte Ltd

Blk 65A Jalan Tenteram #01-06/07 St Michael Industrial Estate Singapore 328958. Tel 62551996

ARTICARES We are leaders in innovative medical technologies including human like decision-making robotics and artificially intelligent solutions that facilitate personalized rehabilitation after injuries such as stroke, dementia, and accidents – a common occurrence in aging population. Our solutions are the outcome of strong collaborations between experts in medical and engineering fields, validated by clinical studies, and made available to you by people who care about making every step of patients’ rehabilitation journey a bit easier. Today, we are one of the fastest-growing companies in this field and our solutions are deployed in major healthcare institutions in Singapore, APAC & EU.

We combine our innovations with out-of-the-box business offerings for providing comprehensive support throughout the hospital to home journey of patients. We are looking for a business development specialist who has the energy and skills to directly and in collaboration with our partners to ensure successful entry of our solutions in international and local markets.

Position/job title

Mechanical Design & Manufacturing Engineer

We are seeking for a profile with demonstrable technical background in mechanical design and manufacturing, particularly of robotic medical devices, to play role in transforming ideas into our products and solutions. In addition to growing together with us in rapidly expanding medical rehabilitation sector, playing this instrumental role would make you contribute to society by driving the realizations of innovative robotics as well as artificial intelligence for better future of rehabilitation.

Official Duty Station

Singapore

Roles & Responsibilities

· Assess requirements then transform into preliminary designs, prototypes, FAs, and final product (production-ready)

· Define and execute the qualifying criteria of every development stage.

· Coordinate production for delivery to customers, both internally and with manufacturing partners.

· Perform stringent risk and root cause analyses to ensure high-quality.

· Optimize development’s and production’s processes as well as costs.

Requirements

· Solid ownership, user-centred, and quality oriented.

· Solid experience in designing robotic device/mechatronic system.

· Proficient in DFMA for machining and soft moulding.

· Proficient in kinematic/motion analysis.

· Proficient in SOLIDWORKS.

· Bachelor’s degree in mechanical engineering, manufacturing, or related fields.

· Any of the followings would be plus:

o Experience in designing and manufacturing consumer products.

o Proficient in converting non-parametric model to parametric model.

o Experience in selection of DC motors

o Hands-on experience in complying with ISO 13485 QMS.

o Hands-on experience in complying with IEC 60601-1.

Job Responsibilities

· In-house design for company’s collaterals such as E-book (portfolio), graphics, etc.

· Maintain company’s objective by generating inbound leads via Facebook Ads, Google Ads (Paid and Organic)

· Content creation for social media platforms such as Facebook, Instagram, YouTube.

· Manage company’s website ( WordPress CMS ) for updates and tracking/processing write-in leads.

· Regular updating of new projects on the company’s website, interior portals and liaise with them for portfolio postings with project details.

· Liaison with the vendor for SEO performance and tracking of page ranking.

· Analyse Facebook Ads and Google Ads for tracking performance and metrics with social media tools such as Google Analytics/AdWords.

· Manage customers’ feedback/complaints and keep a record of reviews/testimonials.

· Brand and marketing development related activities

· Any other ad-hoc design/administrative duties as assigned

Job Requirements

· Minimum Diploma in Marketing, Mass Communications, Advertising/Media or equivalent.

· At least 1 year experience in the related field

· Experience in Digital Marketing, Content Marketing, SEO and SEM

· Effective communication and writing skills

· Experience in content creation and social media

· Knowledge of SEO, Google AdWords / Analytics, and content management system

· Able to work independently

· Dynamic personality

· Liaison of company clients and vendors

Job Description:

• To formulate space planning, interior design conceptualisation and concept development
• To generate 3D Computerised perspective drawings and all construction detail drawings
• To prepare Construction Specification / Design Documentations / Material Selection
• To prepare presentation such as design intent, colour scheme and material board
• To communicate and liaise with clients, contractors, consultants and project managers on all project matters

Requirements:

• Possess minimum Diploma / Degree in related discipline
• Preferably minimum 1 year working experience in Architecture / Interior Design for Commercial and Industrial Projects
• Competent in Autocad, 3D Studio Max, V-ray, Adobe Illustrator, Adobe Photoshop and Microsoft Office
• Able to independently design and prepare full sets of drawings from design intent to construction detailings
• Possess creative flair and good portfolio
• Possess a good knowledge of construction materials and various technical and building codes
• Able to multi-task and meet project schedule
• Able to travel for overseas projects
• Possess good interpersonal and communication skills
• Entry Level candidates are welcome

Job Description:

• Plan and create content for online channels do not limit to social media, microsite, etc
• Develop pages, posts, and applications to appeal to the target audience
• Conduct in-depth social media research to develop various social media content like graphics, videos, and other forms of content to understand the Management needs
• Obtain input from Management Team to ensure that designs meet organizational standards and brand expectations, express ideas accurately, and represent the company or client appropriately
• Work independently as well as cooperatively with creative team to meet deadlines, stay within budget, and schedule project implementation based on workload, which may include five or more simultaneous projects
• Create a wide range of graphics and layouts for product illustrations, company logos, and websites with software such as photoshop
• Develop concepts by hand or with software, and execute original content by determining the ideal usage of color, text, font style, imagery, and layout
• Examine existing processes, identify flaws, and create solutions that improve design capabilities
• Review final layouts and suggesting improvements when necessary
• Stay up-to-date with new design techniques and software
• Any ad-hoc duties as directed

Job Requirements:

• Candidate must possess at least Diploma in Art / Design / Creative Multimedia / Computer Graphics or equivalent
• Minimum 1 years of relevant working experience, preferably with social media design experience
• Solid knowledge of image editing and digital sketching software, ike Photoshop, Indesign and Adobe Illustrator
• Meticulous, ability to multi-task and work within tight timeline
• Possess positive disposition, independent, resourceful and a team player

Main Duties & Job Scope

Daily Main

Monthly rolling Marketing Plan

Shopping Mall Tied-up

Maintenance of website store

Content Creation

Responsible for ensuring e-commerce platform is generating response and sales target

Monitoring of posts and engagement - boost ad

Liaise with partnered platforms to (new/promotional) products and sell through

Drive customer acquisition, retention and growth through digital marketing

seamless customer experience online

Day to day management of e- commerce clients and members

stay up to date with market, consumers and competitors

collect and connect working knowledge on the e-retailers

supports merchandising team on promotional activities and campaigns (Instore/Online)

Shop window plan and concepts

handle artwork and design of in-house marketing collaterals

liaise with printer and suppliers on project delivery

Submission of artworks for approval - even for marketing materials

Design artworks for social Media support & Simple POP

Need to handle graphic design for product development

Assist to response customers enquiries on FB and IG and online

Liaise with influencers

IG and FB Post

IG and FB shops

Improve display of PM Bisque

Monthly Promotion

-Full-time

-Passion in teaching children/adults on art principles and technique

-Conduct and facilitate teaching and guidance in individual or group settings

-Leading and teaching studio classes, school programmes with outdoor workshops and events

-Oversees our art teacher to ensure effective performance

-Management of Marketing for the studio

-Customer relationship management

-Sales growth of our Art Programmes, to help our business expansion

Job Requirement

- English and Mandarins spoken.

Bilingual abilities are a plus. (To communicate with Mandarin-speaking parents)

- Able to work on weekends with off days on weekday.

-Bachelor's Degree/Master's Degree

-Min 5 years in teaching experience

#Skills - Video Editing, Photoshop, Graphic Design, Printed Collateral

#Good in written and oral communication

skillsSkills -• Adobe Photoshop• Adobe Premiere Pro• Adobe After Effects• Photoshop , IIIustrator Model painting.
Thematic painting
Key Responsibilities:

• At least a Diploma in Graphic Design, Visual Communications, or equivalent.
  At least 3 years of experience in print or digital design OR if lack thereof, an impressive online portfolio.
  Expert user of the latest Adobe Creative Suite, in particular InDesign, Illustrator, and Photoshop.
  Model painting. Thematic painting
  Has a strong sense of visual design and the ability to produce clean, sleek work.
  Able to think creatively and independently, create stunning designs with minimal hand-holding or guidance.
  Management Information Systems or equivalent Information Technology experience (2years)
  Good in written and oral communication skills
• EventsSupport team in development & implementation or photography for eventDesign, coordinate event communications collaterals, creating videos
• Trainings / Collaborate SitesKey administrative support for the daily training related issues and enquiries, monitoring of user training , tracking and all types of site training coordination

Send your Resume to [email protected]

Brighton College (Singapore) is an exciting place to work, and it is our employees who make our community a vibrant and stimulating environment. The academic success of the Brighton College Family of Schools is due to excellent, innovative and well-planned teaching.

The school is looking to appoint a motivated, creative and energetic Teacher of Art & Music for August 2024.

ABOUT THE ROLE

• To teach according to the timetable for the current year, ensuring that lessons are planned, ordered and effective.
• To be aware of the need to differentiate work and challenges according to the ability of the pupils, whilst maintaining high expectations of all and taking full account of any linguistic or other special needs.
• To work as part of a team, in harmony with and for the furtherance of the College’s ethos and declared educational aims and priorities
• To be supportive of the department’s aims, agreed teaching styles, methods of assessment and other policies.
• To set written assignments or other creative pieces of work that involve a finished product (prep) regularly and mark them promptly and in accordance with College and Departmental policies, ensuring that formative comments are always helpful and make helpful suggestions for further appropriate improvement in learning.
• To provide parents with written reports on their children’s work and progress according to current College policy and to attend parent meetings.
• To take a share of boarding duties, invigilation and cover for absent colleagues
• To be responsible for the supervision, control and proper use of teaching rooms, materials and resources, and to have regard to health and safety issues and regulations.
• To attend InSET, Staff meetings, Key Stage briefings and other meetings that may be called from time to time, as required by the College's Academic Leadership.
• To report in a timely manner any concerns regarding Child Protection or bullying to the appropriate colleague. Be responsible for the pastoral care of the children in the class and ensuring good personal relationships are fostered between the children themselves and with the teacher.
• To take responsibility for one’s continuing professional development and, to this end, to participate in Development and Review procedures as directed by the College's Academic Leadership.
• To contribute to the College’s broad and active co-curricular activities programme.
• Undertake all duties and procedures as specified in staff handbook.
• To be a good role model in respect of speech, dress, behaviour and care of equipment.
• Meet with parents as required and foster good professional relationships and communication with parents, this includes but not limited to attending parents' evenings, school functions, Parent Association events and other evening/weekend events.
• Ensure that the parent portal is kept up-to-date and provides useful links for parents.
• To actively contribute to the Dance, Drama, Art and Music CCA programme.
• To work within an enthusiastic team and help drive the Art and Music teaching in the College to inspire and instill a love of these subject areas in the pupils.
• Attend department meetings and moderation meetings.
• Contribute to the Department’s devising and writing of new subject materials when required.
• This is not an exhaustive list of responsibilities, reasonable request may also be included.

PERSON SPECIFICATION

• Possess 2 to 6 years of teaching experience with a university degree and teaching qualification.
• Experience of teaching Art and Music lessons to the whole primary age range and EYFS.
• Have knowledge of National Curriculum requirements for Art and Music at the relevant Key Stages, and of writing lesson plans, developing resources and assessing students' work.
• Proven record of teaching experience, prior experience in independent Prep School will be an added advantage.

SAFEGUARDING AND EQUAL OPPORTUNITIES

Brighton College is committed to safeguarding and promoting the welfare of children and young people and expects all staff and volunteers to share this commitment. Any offer of employment will be subject to an enhanced DBS disclosure, / international Police checks, the receipt of satisfactory references, the College’s pre-employment medical question, relevant original ID documentation and examination certificates. The College understands that a robust, fair and transparent recruitment and selection policy plays a central role in achieving this aim.

The College is committed to ensuring that the recruitment and selection of staff is conducted in a manner that is systematic, efficient and effective and promotes equality of opportunity.

The College reserves the right to appoint a candidate to the role in advance of any deadline date, in the event that a suitable candidate can be appointed.

© Brighton College (Singapore) Pte Ltd

CPE Registration Number: 201904884D