Requirements :

1) A Degree in Civil or Structural Engineering from a recognized university or its equivalent recognized by the Professional Engineer Board, Singapore. A diploma holder with design experience will also be considered.

2) Minimum 2 years of design experience in Building projects and/or Earth Retaining Structures.

3) Conversant with local codes and authority submission procedures.

4) Competent in common engineering design software, analytical tools and BIM software.

5) Familiar with precast concrete, post-tensioned concrete and steelwork design, knowledge of MET design will be an advantage.

6) Proactive, responsible and keen to work in a team.

7) Excellent interpersonal, good verbal and written communication skills.

Job Description :

1) Perform Civil/Structural engineering design and analysis.

2) Participate in the BIM process. Involvement in the collaboration with peers and fellow Consultants from other disciplines.

3) Coordinate, monitor and track authority submissions for Projects.

4) Conduct feasibility studies, and inspections and prepare technical reports.

5) Attend meetings and design workshops, when necessary.

6) Liaise with Engineers and/or Consultant teams during the implementation of projects.

The Inclusive Art Teacher plans and conducts art lessons for neuro divergent students aged 9 - 20+years.

Responsibilities are adaptation of curriculum, individualised learning, promoting sensory integration, talent development etc to facilitate learning and transition to independent learning.

• Degree / Diploma in Art teaching,
• Experience and training special needs and art therapy will be complementary to the role
• 2 - 3 years of experience in a similar role
• Willingness to learn and work collaboratively with SLT/ OT/ Teachers
• 8 am to 5 pm with 7+ weeks of paid school holidays
• Salary $3000 - $3800 based on training and experience.

Responsibilities:

• Full responsible for Netlist-to-GDS physical design implementation of 12nm/6nm/4nm and below advanced process chips.
• Block owner, take block of 2~3 Million instances, working on Synthesis/APR(auto place and route)/Signoff
• Block coordinator role for more than 5~10 blocks, solving the critical issue and give the solution to block owners.
• TOP role for the complicated hierarchical chip (more than 20 Million instances plus 500+ macros), doing floorplan and partition, responsible for full chip tapeout

Requirements:

• Bachelor/Master Degree in Electrical/Computer Engineer.
• Experience in physical design with tape-outs.
• Knowledge of complete Netlist-to-GDS flow, Synopsys/Cadence tools like ICC2 or Innovus.
• Good in script programming with Perl, TCL/TK or other languages.

We are looking for a Chef who has rich experience in preparing North Indian Delicacies.

Job Requirements:

· At least 10 years of working experience as North Indian Chef.

· Knowledge about recipes of various Authentic North Indian dishes.

· Rich experience in preparing Indian Soups, Appetizers, Curries and Indian Chinese.

· Experience as Tandoor Chef is added advantage.

· Experience in preparing Indian sweets & desserts.

· Knowledge and Experience to introduce new dishes as “specials of the week".

· Ability to revisit and revise existing menu to better suit the customer needs.

· To cook tasty food using natural spices & healthy ingredients to bring the authentic flavour to dishes.

· To keep track of the stock of groceries, vegetables and meat and order appropriately.

· To avoid food wastage with proper planning.

· To speak English and Hindi fluently.

· To work with great team spirit with other chefs and service staff.

· To maintain kitchen neat and tidy always as per SFA & NEA regulations.

Responsibilities:

You will be responsible for the sales and management of sales business activities. You will be in charge of the market development for the Systems Integration business, prepare long term and short term business plans for revenue generation, develop budget and implement sales and marketing strategies to attain business growth and profitability.

• Gathering of market intelligence on industry trends, competitive development and constant evaluation of potential new customers lines. Develop new market segments and introduce innovative products to continuously grow market share.
• Gain and maintain market information and knowledge to obtain and maintain the targeted market shares in all assigned product categories.
• Manage the business in ASIA in order to achieve and maximize targets for sales, volumes and revenues and to ensure the right organization and structure is in place for delivering the objectives.
• Develop and drive credibility and long term relationship with the customers in ASIA, to fulfil long term sales objectives.
• Responsible for creating and implementing the sales plan, including forecast, monitoring the sales effort and performance against budget and to take corrective actions, in order to contribute to overall business plan.
• Adhere to all company policies, procedures and business ethics codes and ensure that they are communicated and implemented.

Requirements:

• Degree in Electrical / Electronics engineering.
• Min. 3-5 years in Sales or Business Development experience.
• Good sales/business development knowledge in Oil & Gas, Petrochemical, Marines, Power Plant or other harsh and hazardous industries, covering the following system:

- Public Alarm & General Alarm/ Closed Circuit TV System

- Telephone PABX/ Microwave Radio/ Satellite Communication

- Marine Radio System

• Possess excellent written and verbal communication, negotiation and presentation skills, resourceful and creative.
• Good analytical/problem solving skills/abilities.
• Possess good leadership skills with a high level of personal responsibility and self-motivation, ‘can do’ attitude is a must.
• A self-starter with proven managerial skills and sound business acumen, with ability to multi-task and handle work pressure.

Roles & Responsibilities

Job Description

• Carry out Civil and Structural related detailed design, drawings, analysis and calculation required.
• Responsible for the structural analysis, design and authority submission to liaise with client or contractor.
• Provide technical support and monitoring the construction progress, discuss with immediate Supervisor and give out solution on site issues.
• Prepare calculation and drawings for temporary or permanent structures in obtaining approval from authority.
• Check and review all Civil and Structural related drawings and documentation received from Contractor or Client.
• Can do drafting as assigned by immediate supervisor, inspection and other work assigned from time to time.
• Has knowledge in any related authority submission of projects

Job Requirements

• Diploma/Degree holder with Structural related discipline
• Preferred graduate from local University or from overseas University with Excellent Academic results.
• Fresh graduate may apply
• Ability to work independently.
• Familiar with EuroCode Design
• Excellent in written and verbal communication
• Experienced and proficient in using AutoCad 2007 and Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Technical expertise and knowledge of concrete material & structure design
• A team player with the ability to multi-task, prioritize and organize tasks
• Possess a "can do" attitude

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

As a member of the Advanced Development team, you will lead the charge for new technology and design solutions for BISSELL products. You will be part of a collaborative innovation and advance development team to drive excellence in investigating and delivering new technology and design solutions for features, functions, and performance of components and sub-systems for products developed by BISSELL.

Responsibilities:

• Drive investigations, development and integration of technology and design solutions into BISSELL products
• Coordinate and converge internal and external organization activities to conclude on the technical and financial feasibility of technology and design solution proposals with the stakeholders in the company.
• Contribute to advance technology design knowledge and capabilities in the organization
• Complete analysis, design, and validation of new technology and design solutions ideas to mature readiness for product integration.
• Document and present investigations with clear data driven conclusions and recommendations that include solution value, limits, trade-offs, costs, risks, and effort.
• Engage with Global Product Marketing and Engineering Teams to review and conclude the feasibility of technology and design solutions proposed.
• Support product engineering teams in the integration and implementation of accepted technology and design solutions.

Qualification:

• Ph.D./Master's degree in Mechanical/ Mechatronics Engineering
• Industry experience is preferred but not required in the case of relevant experience gained through research and academic engagements.

Experience:

• Structural design and fabrication of mechanical components and assemblies.
• Design and fabrication of aerodynamic parts in turbomachinery, i.e. fans, rotors and impellers.
• Experience on single stage or multi-stage turbine design is an added advantage.
• Expertise to work with different materials, eg plastic, metal, etc. Technical acumen to explore new materials is desirable.
• Design with CAD Modelling and Design Tools (Experience in Creo will be an added advantage). Ability to read, understand and generate engineering drawings using CAD tools is a must.
• Able to carry out Aerodynamic CFD simulation. Experience with CFD design and meshing of complex assemblies with Ansys Mechanical and Fluent.
• Working knowledge of mechanical test standards and test execution activities related to area of work.
• Working knowledge for mechanical tolerancing and stack analysis.
• Able to work with Product Lifecycle Management tools (Experience in PTC Windchill will be an added advantage)
• Working knowledge on measurement/analysis of thermal profile of high-speed electromechanical devices is an added advantage.
• Working knowledge on design and fabrication of high speed electromechanical and electromagnetic components cooling solutions is an added advantage.
• Business acumen to analyze and gauge the commercial viability and IP feasibility is desirable.

Competencies:

• You must have passion, energy and a natural curiosity for research, technology and design. You associate yourself with the following characteristics.
• Proactive in learning and capability growth.
• Possess an innovation mindset.
• Able to do analytical and conceptual thinking.
• Structured, creative and self-driven in problem solving.
• Effective communication skills, both written and verbal.
• Good planning and stakeholder management skills.
• Approachable and engaging in collaboration work.
• A good team player and able to work well in a cross functional and international team environment.
• Effective at presenting results and recommendations to stakeholders and senior levels.
• Able to independently plan, manage and drive results and commitments.

Be part of a team in creating state-of-the-art Secure Low Power SoC ARM-based SoC/MCU for the Low-End , Mid and High-End performance MCU product line in a IC Design Environment.

Responsible:

• Engage design team and architects to strategies DFT Test plan for SoC top level
• Create DFT test modes, scan architecture, clocking and reset architecture.
• Plan Pin-Muxing and Pad and Boundary scan (BSDL) generation
• Execute JTAG TAP network generation and verification.
• Quality check with Spyglass analysis for scan using spyglass tool
• Execute Scan insertion using DC / Tessent tools
• Deploy Scan constraints development for Atspeed, shift and slow capture mode.
• Generate ATPG pattern generation using synopsys Tetramax tools
• Analyze and report on test coverage metrics to ensure comprehensive testing of designs.
• Implement improvements to enhance test coverage and efficiency.
• Verify No-timing and SDF simulation of ATPG patterns using VCS and NCSim tools
• Implement MBIST MBIST repair and verification using Mentor Graphic Tessent tools.
• Boundary scan verification
• Generate STIL test patterns for tester
• Silicon bring-up and failure debug

Requirements:

• Requires BSc/MSc or PhD in electrical and electronic or Computer engineering
• Requires > 5 years or more of experience in DFT at IP and SoC top level. Proficient at using DC ,tetramax and MG tessent DFT tools
• Tape-out at least 5 chips and tested to pass on tester.
• Requires strong understanding of state of the DFT methodology , flat and hierarchical implement of DFT from IP to SoC top.
• Capable of understanding UPF to enable multiple power domain verification
• Capable of leading, review and guiding younger DFT engineers in their daily tasks
• Able to work in a team with a strong drive to excel
• Able to work independently on a given assignment and work hard to finish on time
• Good written and communication skills

All high skills as a hair dresser. (Cut, color, perm, highlight, Balayages, shampoo and blow, Rebonding, customer service, etc..)

We are looking for someone who can create the best hair salon environment together with the relationship of trust with our customers. And Hairdressers who want to learn Japanese beauty techniques are welcome

Founded in 2006, IGG is a leading global mobile games developer and publisher committed to making amazing innovative games for players all over the world. Our games are available in 23 different languages, and are enjoyed by 38 million monthly active users from over 200 countries and regions.

At IGG, we are innovators at work, gamers at heart.

We are currently on the lookout for a Game Design Intern to join us!

Responsibilities:

Collaborate with the game design team to create game concepts, mechanics, and systems

Assist in designing and balancing game levels, and challenges

Conduct playtesting and provide feedback on game mechanics and user experience

Assist in creating and maintaining game design documentation and spreadsheets

Requirements:

Has education background in game design or game development

Proficiency in Unity is a bonus.

Excellent communication and teamwork skills.

Ability to work independently and take initiative.

What’s in it for you!

Excellent projects and team members conducive to personal growth

Vibrant work environment

Well stocked pantry

We are an interior design firm specializing in high end residential design.

We are looking for a resourceful, numerate, multitasker to be the right hand to our CEO.

The candidate should be equally comfortable liaising with our high-end client base as well as coordinating/ directing our contractors. Ours is a fast paced, dynamic environment. We are a closeknit friendly team and we are looking for someone who can support our existing operations and help us develop further.

Job Description & Requirements:

This is not a design role and the candidate does not require any design experience but an interest in design and the home is essential to be able to support the design team.

Responsibilities include but not limited to:

· Liaise with vendors, suppliers, contractors

· Project purchasing

· Logistics and Inventory management

· Sales Admin & Office Admin

· HR Coordination

· Liaise with/ support the finance team

· Liaise with outsourced IT

· Business Development

· Events organization

Skills and experience required:

· Possess at least a Degree/Diploma

· Minimum of 5 years’ relevant experience

· Strong Experience in project purchasing, sales admin support, general office management functions are required

· Well versed with MS Words, Excel, PowerPoint and Outlook is a must. Familiarity with HR and accountancy softwares and Canva is an advantage.

· Meticulous, have an eye for detail and an inquiring mind

· Self-motivated, Pro-active and with a good work ethic

· Good communication skills

· Relates to people of all levels and enjoys working in an innovative and fast pace environment

· Enjoys working independently as well as in a team

· Singaporeans & PRs only

Interested candidates, please email your resume to [email protected] and [email protected].

Job Highlights

• High Commission Base
• Sales Incentives
• Performance bonus and Company Trips
• Sales training provided
• Leads provided
• Start ASAP

Job Description

ROCKSTAR IS HIRING & WE WANT YOU TO SUCCEED! ROCK IT ON!!!

• Fully Commission Based
• High Commission & Sale Incentives
• Positive learning attitude and takes pride in your work
• Able to work efficiently and calmly under pressure
• Willing to learn more about Interior Designing
• Highly Motivated & Sales Target Driven
• Highly Customer-oriented with excellent communication skills
• Highly Responsible & Reliable
• Independent with sales-target driven mindset
• Training can be provided
• Dealing with residential and commercial or others

Requirements -

• Individuals with good communication skills
• Creative and have passion in Interior Design
• Self-motivated and sales target driven
• Responsible, proactive & good work attitude
• Able to work in a team and individually
• Able to visualize concepts and explains the interest in changing trends in design
• Bilingual in English & Mandarin in order to liaise with Mandarin-speaking customers.

Interested candidates are invited to apply online by clicking ‘APPLY NOW’ button below with an updated resume.

Only shortlisted candidates will be notified.

Thank you for applying.

Job Highlights

• High Commission Base
• Sales Incentives
• Performance bonus and Company Trips
• Salea training provided
• Leads provided
• Start ASAP

Job Description

ROCKSTAR IS HIRING & WE WANT YOU TO SUCCEED! ROCK IT ON!!!

• Fully Commission Based
• High Commission & Sale Incentives
• Positive learning attitude and takes pride in your work
• Able to work efficiently and calmly under pressure
• Willing to learn more about Interior Designing
• Highly Motivated & Sales Target Driven
• Highly Customer-oriented with excellent communication skills
• Highly Responsible & Reliable
• Independent with sales-target driven mindset
• Training can be provided
• Dealing with residential and commercial or others

Requirements -

• Individuals with good communication skills
• Creative and have passion in Interior Design
• Self-motivated and sales target driven
• Responsible, proactive & good work attitude
• Able to work in a team and individually
• Able to visualize concepts and explains the interest in changing trends in design
• Bilingual in English & Mandarin in order to liaise with Mandarin-speaking customers.

Interested candidates are invited to apply online by clicking ‘APPLY NOW’ button below with an updated resume.

Only shortlisted candidates will be notified.

Thank you for applying.

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME’s advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME’s heterogeneous integration platform.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.

o <!-Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments.

o Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.

o RTL implementation for custom circuit design using Verilog/SystemVerilog

o Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architecture such as in-memory computing, deep learning and neuromorphic computing.

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of digital designs to validate functionality and performance.

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure.

o Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

· Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture.

· Prepare detailed design documentation, including specifications, test plans, and reports.

· Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

· Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME’s advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME’s heterogeneous integration platform.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.

o <!-Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments.

o Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.

o RTL implementation for custom circuit design using Verilog/SystemVerilog

o Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architecture such as in-memory computing, deep learning and neuromorphic computing.

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of digital designs to validate functionality and performance.

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure.

o Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

· Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture.

· Prepare detailed design documentation, including specifications, test plans, and reports.

· Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

· Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

Burnt Ends has established itself as one of Asia’s most exciting places to dine. It is a modern Australian-style barbecue restaurant which believes that magic that comes from cooking with wood. The main restaurant and office is located at Dempsey and there is one Meatsmith restaurant in Telok Ayer.

JOB SCOPE AND RESPONSIBILITIES:

• Design and develop attractive visual content for emailer campaigns and ads for all brands
• Develop & manage attractive campaigns & manage promotional collaterals to boost sales, as well as drive traffic to website and social media platforms
• Assist with menu changes and design updates
  developing a compelling and engaging social media content calendar for the Group’s social media platforms, as well as exploring other potential platforms for greater online engagement and visibility.
• Monitor and collate data of all digital marketing platforms (social media and websites Google Analytics) i.e. number of impressions, unique visits, number of followers, link clicks, weekly sales, etc.
• Identify digital marketing trends and market activities
• Support the maintenance & updates of all marketing design collateral, in-house website platforms & eCommerce platforms e.g. Website, Chope, Oddle, etc
• Update website copy and promotional design collateral
• Organize and participate in Quarterly Promotions meetings and action plan post-meeting
• Other related tasks as and when assigned
  

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Prepare meeting materials for production planning such as line-ups, rundowns and location surveys which includes schedule paperwork and camera scripts for Producers.
• Requistion of props and costumes.
• Ensure that all props and costumes are ready for actual filming.
• Manage talents and crew both in Studio and location filming and see to crowd control.
• Prepare production reports.
• Ensure there is continuity of costumes and props during production.
• Follow up on editing such as transfer and logging, dialogue dubbing and transcribing.

• Diploma and Degree graduates or candidates with 2 years of related experience in media are welcome to apply.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Conduct material and field research and verify facts before scripting for production.
• Provide advice to producers based on the facts/data gathered.
• Build script draft and sequence for content flow and eventually write good quality Chinese scripts for programme.
• Brainstorm interesting programme concepts and do presentation at pitch sessions.
• Source for talent and assess suitability of role based on requirement of programme.
• Source for location and assess for suitability and cost.

• Minimum a degree in education with 2 years of working experience.
• Passionate about the entertainment industry.
• A strong communicator and has a flair for writing.
• Possess good research skills.
• Good command of Chinese language - both written and spoken as you will be attached to the Chinese Entertainment production.
• Effectively bilingual in Mandarin and English to communicate with various departments and organisations.

Full Time Position Only.

Responsibilities

1. Demonstrate proficiency in various art techniques, mediums, and styles, and effectively teach students how to use them to express their ideas and emotions.
2. Provide guidance and support to students in developing their artistic skills, including drawing, painting, sculpting, and other art forms.
3. Create a positive and inspiring classroom environment that encourages experimentation, self-expression, and collaboration among students.
4. Evaluate and provide constructive feedback on students' artwork, helping them identify areas of improvement and celebrating their achievements.
5. Ensure a safe and orderly art classroom environment, following appropriate safety guidelines and procedures for handling art materials and equipment.

Requirements

1. Demonstrate proficiency in various art techniques, mediums, and styles.
2. Previous experience teaching art to students of various age groups and skill levels.
3. Passion for art education and a commitment to fostering creativity and artistic growth in students.
4. Enthusiastic individual that has initiative, high adaptability
5. Strong communication and interpersonal skills, with the ability to connect with students, parents, and colleagues effectively.
6. Maintain tidiness and cleanliness of studio.
7. Knowledge of safety protocols and procedures for handling art materials and equipment.
8. Able to converse in English and/or Mandarin (as will need to liaise with student and/or parents who speaks in mandarin)

Job description:

As a member of the filter design team, the successful candidate will play a key design role as a product owner of resonator/filter in development and commercialization of acoustic filters with both BAW and SAW technologies from beginning, concept meeting to end, mass production including characterization.

Experience with either SAW or BAW filter design -layout, simulation, fabrication, and characterization- is required for senior position and principal position is available for candidates with proven track record in ramping up commercialization of acoustics filters in mass production environment.

Responsibilities:

- Co-work with international team across China, Singapore, South Korea, and Europe on a cross-disciplinary team basis

- Use commercial circuit analysis and physical modelling tools as well as custom software packages to design and analyse acoustic filters

- Assist RF measurement analysis by generating test plans and analysing results

- Produce RF engineering reports to support team members

- Communicate with R&D team for co-design and device improvement

Qualifications/Desired skills:

- Track record in design and mass-production of SAW/BAW filters for mobile applications is highly desirable

- Strong skills and working knowledge of design simulation tools, e.g. ADS, AWR, HFSS, COMSOL, etc

- Understanding of RF test parameters and test equipment

- Understanding of filter application and mobile communication system and architecture

- Experience with drawing programs, schematic capture and PCB layout tools

- Experience in RFIC design, RF module and front-end system design is preferred

- Knowledge of MEMS fabrication

- Strong written and verbal English skills to support complex analysis

- Organized team player and a good learner who is open to discussions

UWCSEA Dover has a vacancy for an Art Technician from May 2024. Reporting to the Heads of Art, the successful incumbent will support the Art department and teachers with inventory and the creation and delivery of curriculum needs and materials.

Main Responsibilities

• Preparation of materials and provide classroom support for Teachers (delivery of iPad trolley, inventory and restocking of classroom supplies etc.).
• Assist in classroom routines and curriculum such as mounting/framing and hanging of artwork in the College, including annual Art exhibitions, GCSE exams, College displays etc.
• Conduct and maintain storeroom supply inventory.
• Assist students with technical constructions (i.e. general wood cutting).
• Work with a variety of common workshop tools and maintain the inventory, operation and proper storage of art tools (i.e. ceramics kiln, 3d printer, laser cutter etc. *Training for these tools can be provided.).
• Attend to any other duties as assigned.

Person Specifications

• Minimum Diploma in any related discipline with 2 years of experience.
• Relevant experience as a school art technician is desirable but will consider someone who has a good work history.
• Good initiative, self-management and communication skills.
• Ability to use basic woodcutting tools (i.e. cutting plywood down to standardised sizes)
• Knowledge of laser cutter, 3D printer, ceramics kiln is highly desirable, but some training can be provided.
• Ability to stretch canvas on frames.
• Ability to work independently and as part of a team.
• Approachable, friendly, and willing to assist in problem-solving.
• Able to manage time efficiently and prioritise tasks in the department.
• Physically fit to carry and handle artworks and materials (i.e. 10kg bags of clay).

Application

Apply via our portal by Tuesday, 2 April 2024 at 11:59pm Singapore Time.

The UWC Mission is to make education a force to unite people, nations and culture for peace and a sustainable future. We are committed to creating a community in which all members feel safe and secure, and know that their authentic selves and individual differences are accepted with respect and care. At UWCSEA, we acknowledge that diversity, equity, inclusion and justice (DEIJ) is an ongoing and evolving process and strive to create and sustain a sense of belonging for all members of our community, past, present and future. All qualified applicants, including those who identify as a part of marginalized group(s) and individuals with (dis)abilities are all encouraged to apply. Our school is committed to safeguarding and promoting the welfare of all the students in our care and expects all applicants to share this commitment. We follow safe recruitment practices and all appointments are subject to interview, satisfactory references, identity and criminal record checks.

Accounts

• Maintain full set of accounts
• Perform daily bookkeeping activities such as sales, purchases, receivables, payables
• Ensure proper accounting records are maintained and procedures are adhered to
• Prepare and submit quarterly GST filing and other tax compliances
• Prepare month-end, financial year-end closing, monthly balance sheet, P&L, bank reconciliations
• Prepare and submit monthly CPF submissions
• Manage timely closing process and reconciliations
• Manage fixed assets; balance sheet accounts reconciliations
• Manage the implementation and monitoring of the Fee Protection Scheme in the school
• Support and collaborate with relevant stakeholders to ensure compliance with financial policies and procedures
• Liaise with the corporate secretary on work such as resolution preparation, submission to ACRA, maintenance of various registers, etc
• Liaise with external auditors, tax agents and external parties to ensure relevant statutory compliance.

Admin/HR

• Support admin function for purchasing, report typing and invoicing
• Administer payroll, CPF & staff benefits

Others

• Other ad-hoc tasks as and when assigned by the HOD

Job Requirements:

• Diploma in Accountancy or any other relevant qualification
• At least 3 years of relevant working experience
• Independent, meticulous, and able to communicate effectively
• Proficient in MYOB, ABSS or other similar accounting software
• Prior experience in EduTrust PEIs and/or SSG Registered Training Providers will be a bonus

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026