Responsibilities:

• Monitor Soil Investigation to get correct geotechnical design inputs for design.
• Foundation recommendation report preparation including backup calculation (In all types of soils & rock)
• Pile capacity calculations in various soils/rocks. Test pile location plan/ Pile reinforcement calculations & drawing preparation. Validation of pile capacity by Pile load test (Vertical / Lateral / Pull out).
• Piled Raft design using the latest design tools and theories.
• Design using PLAXIS 2D Software (Sheet pile with structure waler /Diaphragm wall-structure/contiguous pile with soil/rock anchor)
• Design of all components like Anchor capacity, water & structure design, modeling top-down method of construction.
• Dewatering system design. (Wellpoint, Drawdown calculations, Open dewatering).
• Seepage control techniques like Jet -Grouting, slurry wall & flow net calculations.
• Soil improvement using stone column
• Design of stone columns, settlement calculations & Liquefaction calculations.
• Swelling soil management techniques.
• Back Fill material specifications & various compaction techniques used for different backfill materials.
• Slope stability calculations and analysis

Requirements:

• Bachelor’s Degree/Diploma in Civil Engineering
• Min 5 years of relevant design experience in Geotechnical design
• Hands-on experience using analysis & design tools like PLAXIS 2D/3D, SLOPE/W, A-PILE & L-PILE is required.
• Knowledge of STAAD Pro, SAFE, ETABS will be an added advantage.
• Ability to work independently as well as in a team.
• Ability to manage tasks as per priorities.
• Good verbal and written communication skills

For a confidential discussion please send your cv to [email protected]

To view more roles within the Construction & Engineering | Project Management Sector please visit our LinkedIn page @ Artemis Executive Solutions or https://www.careers-page.com/artemisexecutivesolutions We thank you for taking the time to apply but due to the high volume of applicants, we regret to inform you that only shortlisted applicants will be contacted.

EA Lic. No. 23C1598 | R1330228

Our client is one of the leader in the semi-con industry, they are hiring a SOC PHysical design engineer to join the team and it will be a 12 month contract.

Job Responsibilities:

• Responsible for physical design, development for variety of SoC(System On Chip) and tapeout.
• Execute state-of-art methodologies include, floor-planning, place and route, RC extraction, timing and power optimization, physical verification.
• Doing benchmarking on Performance/Power/Area to validate the robustness of APR flow.
• Enhance project efficiency by using scripting language like Perl, TCL, Python etc.
• Provide feedback to flow development team for company flow enhancement.

Requirement:

• Bachelor of Science and above degree with microelectronics background.
• Open to fresh graduates and/or at least 2 years of physical design related experience.
• Willingness and ability to travel as needed.
• Be able to demonstrate you have the ability to prioritise, organise work, meet deadlines, multitask.
• Good communication and teamwork, able to work under pressure.

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E EA License No. 01C4394 • EA Registration No. R21103542 (Ling Kai Jin)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Responsibilities:

• Lead and manage the mechanical and electrical (M&E) design and engineering activities.
• Oversee the planning, design, and implementation of M&E systems for construction projects.
• Collaborate with architects, consultants, and contractors to ensure integration and coordination of M&E systems with overall project design.
• Review and analyze project specifications, drawings, and technical documents.
• Prepare and present technical proposals and reports to clients and stakeholders.
• Ensure compliance with regulatory requirements and industry standards in the design and construction of M&E systems.
• Manage and monitor project progress, budget, and quality of deliverables.

Requirements:

• Bachelor's degree in Mechanical or Electrical Engineering or related field.
• Minimum 4-6 years of experience in M&E design and engineering, preferably in the construction or design industry.
• Experience in managing and leading a team of engineers.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

Responsibilities:

• Prepare and submit tender proposals, including cost estimates, bill of quantities, and pricing schedules.
• Review and analyze project specifications and drawings to accurately determine project requirements.
• Collaborate with project teams to develop accurate and competitive tender submissions.
• Liaise with clients, consultants, and subcontractors to gather necessary information for tender preparation.
• Compile and submit quotations for projects, including all necessary materials and services.
• Review and negotiate subcontractor and supplier contracts.
• Ensure compliance with industry standards, regulations, and company policies.
• Accurately certify and validate progress claims submitted by contractors.
• Take responsibility for managing the final account.

Requirements:

• Degree or Diploma in Quantity Surveying, Construction Management, or related field.
• Minimum 5 years of experience in tendering and quantity surveying in the interior design/construction industry.
• Strong analytical and problem-solving skills.
• Excellent communication and negotiation skills.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

Mechanical Design Engineer

• Working Hours: Monday-Friday [8.30am - 5.45pm]
• Location: Kaki Bukit
• Salary: $3,000-$4,500

Requirements:

• Degree/Diploma in Mechanical Engineering
• Degree with min 3 years design experience and Diploma with min 4 years design experience
• Good design experience in Machine Automation, Robotic Systems, Material Handling Systems and good to have experience in Fixtures & Tooling.
• Good knowledge on Solid Works / Pro E / AutoCAD
• Must able to travel in short notice & Good in Customer Engineering

Jobs Scope:

• To plan organize, co-ordinate and implement projects in timely manner
• Ensure schedule and requirements are met to customer criteria
• Participation in feasibility studies, quotation, design, product development to presentation.
• Follow up with hand on troubleshooting and training.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Looking for an energetic Art Consultant highly skilled in Customer Service. Duties to include the following:

· Conducting sales of artwork, whilst collaborating closely with the sales team.

· Creating and maintaining relationships with industry specialists, such as Artists and Collectors, in order to develop a client base.

· Display a clear understanding of client’s needs and interests, looking at not only style, but also practicality. Having extensive knowledge of each artist’s individual techniques and their significance within the industry.

· Attending Art Fairs and events, whilst also meeting with clients in order to sell, source and invest in new pieces.

· Planning and hosting events, such as art exhibitions, in order to meet with prospective buyers.

· Maintain a clear understanding of art world trends as they change.

· Confidently liaise with artists, press and relevant organisers of art fairs.

Illuminating Asia SG would like to extend an exciting, fulfilling engineering career to graduates/ graduating students that cuts across M&E engineering, design, architecture, arts, creative media, electronics engineering, Technology, Smart IoT, big data analytics, and more.

Under company’s ultra-modern, innovative and creative environment, students can get to work on novel and challenging topics/ projects with a team. Training, mentorship, and personal development programs will be incorporated into daily tasks and on the job.

Illuminating Asia SG covers the lighting, semiconductor, nanotechnology, light fidelity sector, and wireless technology current trends that are the attention of many local and international technological enterprises. Students can have a rewarding career in interactive and immersive lighting setups, lighting hardware, and associated technologies that support lighting and visual displays with the prospects available to work with local and international organizations.

Individuals will be exposed to multidisciplinary skills in engineering, marketing, site work, project management and high-level data gathering. On a side note, Illuminating Asia is on the lookout for people with the ability to increase operational effectiveness and quality control in the environment of a high-adrenaline culture.

Since the company is developing new lighting + IoT solutions, the graduates are expected to perform research studies and represent in lighting-related competition. As a strong growing startup, they offer precious opportunities for inspiring young individuals to grow company’s business, delivering an investor pitch, and liaising with wide range of stakeholders.

Illuminating Asia SG welcomes passionate students with a training in business, architecture, electrical, space design and energy management industry to join us on this innovative lighting application journey.

Capable individuals will gradually be promoted to managerial positions in an accelerated recognition program if deem competent.

There will be weekend duties in our showroom gallery too. Internship duration will need to be at least 20 weeks. IA Internship program is all 5.5 work days.

Kindly email your CV, cover letter to [email protected]. describing how you may value add to the firm with your strengths. We regret that only shortlisted candidates will be notified.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 3 to 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Looking for experienced Plumber Contractor to assist with mostly residential services.

Responsible and hard working attitude towards career.

Training will be provided to adapt.

Main Duties and Responsibilities

• Oversee projects which include landscape and horticultural construction, horticultural, and landscape maintenance.
• Attend site inspection, tender show round, and meetings.
• Responsible for bidding, estimating, and contract negotiations.
• Maintain communication with customers throughout the project timeline.
• Prepare work schedules, various reports, and records on work done on-site.
• Ensure accurate documentation of project costs.
• Close projects and submit timely and accurate billing paperwork for invoicing.
• Analyse project budget and actual costs and relate them to future estimates.
• Pre-empt and troubleshoot on-site problems.
• Ensure safety regulations are implemented and complied with.

Requirements:

• Minimum Diploma in Horticulture or related fields.
• At least 2 years of local relevant experience.
• Must have a valid Class 3 Manual license.
• Proficient in Microsoft Office.
• Candidates who are Certified Arborists have an added advantage.

Working Hours: Monday - Friday (8am - 5pm) Saturday 8am - 12pm (2 alternate Sat off)

Interested applicants, please submit your full resume and expected salary to: [email protected]

We regret to inform only shortlisted candidates will be notified.

· Conducting sales of artwork, whilst collaborating closely with the sales team.

· Creating and maintaining relationships with Artists and Collectors.

· Display a clear understanding of client’s needs and interests, looking at not only style, but also practicality.

· Attending Art Fairs and events.

· Assist with events, such as art exhibitions.

Role & Responsibilities:

• Responsible for Artwork creation and packaging design.

• Maintain and update drawing revision and Ensure drawing is maintained in their respective project folders.

• Issue Mechanical Change Notice (MCN) for the drawings updated.

• Support Engineer on BOM List creation of the assigned project.

• Generate mechanical-technical reports based on mechanical testing and findings. Results based on data information.

• Support the First article inspection report (FAIR) & assist with measurements on all dimensions as per drawing.

• Support and issue technical change notice (TCN) & engineering change notice (ECN) under the instruction of the Engineer/ Manager.

Requirements:

• Bachelor's Degree in Mechanical Engineering with a minimum 1 year of experience in mechanical design of consumer electronics

• Proficiency in 3D CAD design tools (Pro/Engineer Wildfire)

• Knowledge of material properties and processes for plastic, sheet metal, rubber, die cast, and packaging materials will be an added advantage.

• Able to work independently with minimal supervision when executing mechanical designs.

Kindly forward your resume in Word format to apply(at)tekvillage.com

EA Licence No: 18C9120

EA Personnel: R1764354

Note: Only shortlisted candidates will be notified.

Our client is a leading channel partner for games and entertainment software in Asia. Due to business needs, they are now recruiting a Finance Executive to be part of their Finance team for ongoing transformation projects. They are located in the East Area - easily accessible.

Roles and Responsibilities:

• Oversee a portion of accounts, encompassing intercompany charges, bank reconciliation, balance sheet schedules, and general ledger maintenance.
• Swiftly address and resolve accounting backlogs to ensure smooth financial operations.
• Collaborate with Finance teams to reconcile outstanding entries and resolve discrepancies efficiently.
• Maintain accurate and current financial records in compliance with company standards.
• Support the Finance team by furnishing required documentation and assistance during financial audits.
• Aid in the preparation of schedules and reports for external auditors.
• Foster effective communication with internal teams, facilitating information gathering and resolution of financial issues.
• Provide clear and concise updates on the status of backlogs and audit-related tasks.
• Organize and maintain documents with meticulous filing.
• Undertake additional responsibilities as directed by the Supervisor as needed.

Requirements:

• Diploma in Accountancy or equivalent.
• Relevant working experience.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Responsibilities:

• Collaborate with consultants to align design drawings with regulatory requirements.
• Create technical submissions for materials, construction methods, and structural shop drawings
• Address construction issues on drawings and maintain close communication with Architectural, M&E teams, and regulatory authorities.
• Evaluate and propose solutions for technical challenges, while planning, monitoring, and reporting the progress of shop drawing production
• Oversee a team of BIM Modelers responsible for generating coordinated shop drawings and Concrete Body Plans.

Requirements:

• Min Degree in Civil Engineering or it's equivalent
• At least one year related working experience
• Professional Engineer registered with the Professional Engineers Board, Singapore is an added advantage
• Have familiarity with British and Singapore Design Standards.

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our Client is an established company in Singapore, who is seeking to recruit a Senior Director, Design and Engineering (Data Centre).

Senior Director, Design and Engineering (Data Centre)

Our client is looking for a senior director to manage their data centre design / engineering for regional expansion. You will be leading the inhouse engineering design team.

Responsibilities:

· To ensure we deliver to our customers on time and on budget.

· Lead the internal & external design teams as our project technical lead.

· Develop innovative Building & associated MEP solutions for our data centres.

· Collaborate with both internal and external construction and commissioning teams.

· Drive continuous engineering solutions across the business by leading the design of customer-centric solutions.

· Lead a project design team from inception to delivery of multi-MW hyperscale solutions.

· Develop high-level schematics of Building & associated MEP solutions.

· Develop Basis of Design documents to communicate design intent externally and internally.

· Perform concept equipment layouts.

· Collaborate with our top cloud and enterprise customers and communicate presentations on all aspects of design.

· Develop high level master planning, space planning and engineering solutions for potential new developments (conceptual and feasibility stage)

· Produce consultant briefs to develop designs from feasibility stage through concept, scheme and detailed design stages, ensuring continuity of design philosophy and approach.

· Coordinate technical aspects of direct procured equipment and facilitate alignment with the design team.

· Understand commercial implications of engineering decisions and build cost models for customers.

Requirements:

· Minimum 20+ years' experience in design and project delivery across multiple industries

· 10+ years’ experience working for a data centre design experience in the Asia Pacific market as a consultant will be an advantage.

· Strong leadership and foresight to lead multi-disciplinary teams across multiple geographies.

· Exceptionally flexible and forward-thinking as you must be ready for continuous change in direction.

· Willing to make decisions and be accountable for them.

· Excel at communication and can deliver effective presentations on data centre operations to customers, peers, and management.

· Willing to travel to other APAC regions on a regular basis.

JJ Consulting Services

EA Licence No.: 12C6207

Applicants are invited to send in a MS Word resume to [email protected] stating position applying for/present/expected salaries and earliest available date.

We thank all applicants in advance and regret that only short listed candidates will be notified.

Responsibilities:

• Lead and manage construction projects from inception to completion.
• Coordinate and oversee all aspects of the project, including design, planning, budgeting, scheduling, and procurement.
• Collaborate with architects, engineers, and contractors to ensure smooth project execution.
• Manage and resolve project issues and risks in a timely manner.
• Ensure compliance with building codes, regulations, and safety standards.
• Manage project budgets, cost control, and financial reporting.
• Prepare and present project reports and updates to clients and stakeholders.
• Supervise and mentor project team members.
• Ensure quality assurance and delivery of projects within budget and schedule.

Requirements:

• Bachelor's degree in Civil Engineering, Architecture, or related field.
• Minimum3-6 years of experience in project management, preferably in the construction or design industry.
• Strong leadership and communication skills.
• Excellent problem-solving and decision-making abilities.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Design Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Responsible for the creation of innovative product designs and improvement/development to existing product designs.
• Regularly engages with third parties (e.g. customers, suppliers, vendors, etc), contributing to the technical specifications development.
• Responsible for various aspects of projects and collaborates with support teams to develop operational procedures.
• Management of engineering design modifications, involving the review as well as approval of engineering’s drawings.
• Proficient in appointed meetings to ensure the compatibility, interfaces, and functionality of relevant components within associated systems.
• Attends project meetings, where technical details are presented.
• All other ad-hoc duties as assigned.

Requirements:

• Minimum Degree in Engineering or equivalent
• Minimum 6 years’ relevant working experience
• Understanding of various industry standards and offshore operations

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Responsibilities:

• Create detailed design drawings using AutoCAD Software and Revit.
• Collaborate with architects and other engineering disciplines to develop and modify design concepts.
• Review and analyze design specifications and requirements.
• Prepare accurate and comprehensive design documentation.
• Coordinate with project teams to ensure timely completion of design deliverables.
• Conduct quality checks on design drawings to ensure compliance with standards and codes.
• Stay updated with the latest software tools, techniques, and trends related to AutoCAD and Revit.
• Assist in the development and implementation of design standards and procedures.
• Support in coordinating design activities and resolving technical issues.

Requirements:

• Degree or Diploma in Engineering or related field.
• Proficient in AutoCAD Software and Revit.
• Excellent attention to detail and accuracy.
• Effective communication and interpersonal skills.
• Ability to work independently as well as with a team environment.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

Job Description

• Industry/ Organization Type: Advertising Agency
• Position Title: Digital Project Director / Art Director (Digital)
• Working Location: Central
• Working Hours: 5 days, Monday – Friday (9:30 AM – 6:30 PM)
• Salary Package: Basic + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Oversee multiple digital content projects, ensuring timely execution and delivery to clients.
• Collaboratively work with the Creative team to manage and meet project deadlines.
• Maintain open and ongoing communication with clients for project briefings, feedback collection, and idea presentation.
• Promptly address and escalate any project inconsistencies or challenges.
• Directly engage with clients, presenting creative directions and managing any arising issues.
• Apply your expertise in UX/UI design principles to evaluate and guide creative web design efforts.

APPLY NOW!!!

• A Bachelor’s degree in Business, Digital Design, Marketing, or a related field.
• A minimum of 3 to 5 years of related work experience, with a preference for candidates with an agency background.
• A strong portfolio showcasing multiple digital project deployments.
• Proficiency in MS Office and familiarity with various digital platforms.
• Mandatory UX/UI design experience, with an exceptional ability to assess creative design elements.
• Excellent communication skills, both written and verbal, and capable of presenting ideas and findings confidently.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66196 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Responsibilities:

• Lead and manage the mechanical and electrical (M&E) design and engineering activities.
• Oversee the planning, design, and implementation of M&E systems for construction projects.
• Collaborate with architects, consultants, and contractors to ensure integration and coordination of M&E systems with overall project design.
• Review and analyze project specifications, drawings, and technical documents.
• Prepare and present technical proposals and reports to clients and stakeholders.
• Ensure compliance with regulatory requirements and industry standards in the design and construction of M&E systems.
• Manage and monitor project progress, budget, and quality of deliverables.

Requirements:

• Bachelor's degree in Mechanical or Electrical Engineering or related field.
• Minimum 4-6 years of experience in M&E design and engineering, preferably in the construction or design industry.
• Experience in managing and leading a team of engineers.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

Job Description

• Industry/ Organization Type: Engineering/Manufacturing
• Position Title: Mechanical Design Engineer/Hydraulic Systems Engineer
• Working Location: Tuas
• Working Hours: 5.5 days’ work (Mon – Fri: 8 am to 5 pm, every alternate Saturday 8 am to 5 pm)
• Salary Package: Up to $3500 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Develop designs for a variety of mechanical structures and hydraulic systems.
• Analyze and interpret mechanical and hydraulic design schematics.
• Ensure individual tasks are completed efficiently and on schedule.
• Collaborate effectively with Sales, Projects, and Operations teams.
• Follow ISO 9001 standards for design and processes, constantly seeking quality improvement.
• Undertake additional tasks as directed by management.

APPLY NOW!!!

• Degree/Diploma in Mechanical Engineering / Pipe Engineering.
• Minimum of 3 years of experience in a relevant field.
• Proficiency in hydraulic systems and AutoCAD 2D & 3D design software.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66202 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing / Advertising
• Position Title: Art Director (Print)
• Working Location: Central
• Working Hours: 5 days, Monday – Friday (9:30 AM – 6:30 PM)
• Salary Package: Basic up to $7000 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Lead the print team and oversee the development of work for consumer and corporate client campaigns and projects.
• Conceptualize and propose innovative print ideas for above-the-line (ATL), below-the-line (BTL), and through-the-line (TTL) advertising campaigns.
• Provide art direction guidance to the design team, ensuring the creative vision is executed effectively.
• Work on multiple projects simultaneously, managing priorities and timelines effectively.
• Collaborate with clients, account managers, and creative teams to understand project objectives and deliver creative solutions that meet client expectations.
• Stay updated with industry trends, emerging design techniques, and new technologies in print and graphic design.

APPLY NOW!!!

• Bachelor of Arts in Graphic Design, Fine Arts, or equivalent from an accredited art/design school or university.
• Excellent interpersonal and presentation skills, with the ability to effectively communicate and collaborate with team members and clients.
• Minimum of 3 years of professional experience as an Art Director in print, web, and creative design.
• Outstanding portfolio demonstrating successful projects with regional and Singapore clients.
• Proficient in design software such as Photoshop, Illustrator, InDesign, Freehand, and Flash.
• Sound knowledge of production processes related to print design.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65175 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Merchandising Assistant | Fashion Design | Bendemeer

Working Days: 5 Day A week (Mon - Fri)
Working hours: 8:30am-5:30pm (Lunch: 12noon-1pm)
Working Location: Bendemeer
Salary: $2000-$2200, subject to experiences

Responsibilities

• Attend to customers and take their body measurements
• Visit customers’ premises when required
• Coordinate fitting/measurement exercises and prepare data entry
• Checking of orders from customer and placing orders to suppliers
• Arrange/prepare labels/chips/fabrics for supplier
• Arrange and coordinate production, conduct QC to ensure accuracy of products
• Purchase fabric/trims/accessories if needed
• Prepare documents and samples to submit for new tender
• Sourcing for new suppliers/factories/customers
• Negotiate pricing with suppliers, prepare BOM and propose the price for the product
• Monitor inventory of fabrics and stock
• Update customer on delivery status and stock level monthly
• Perform other duties as assigned

Requirement:

• Computer literate
• Possess relevant working experiences will be an advantage.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

RESPONSIBILITIES

• Oversee the design timeline and make sure the work is completed in compliance with the contract and laws.
• Examine, evaluate, look into, and create the design. Create technical documentation and guidelines in accordance with the specified budget,
• As new designs and products are being developed, prepare engineering documents (technical specifications, calculations, drawings, etc.).
• Create new drawings, revisions to existing drawings, parts lists, and change orders.
• Analyze the effects of the arrangement and illustrations.
• In collaboration with the Ship Design Authority, plan and coordinate any necessary design modifications.
• Using specified test protocols from the technical database, test and validate the technical interfaces for the work completed.
• Communicate with the Ship Design Authority and ship owners to get their approval for the engineering deliverables.

REQUIREMENTS

• Minimum Degree in Electrical Engineering
• 1-2 years experience in Electrical Design Engineering or Naval Engineering Officer
• Stay up to date on military, industrial, and naval classification rules that are pertinent to design work.
• Project Management Skills in Engineering Design is highly advantageous

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Senior Design Engineer
• Working Location: Kallang
• Working Hours: Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $7,000 + VB
• Duration: Permanent

Key Responsibilities

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

APPLY NOW!!!

• Degree in Mechanical or Mechatronics Engineering with more than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas:

1.Design of automation or semiconductor equipment

2.High precision machine design

3.Design of High-Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle.
• Ability to work independently with high level of motivation and communicate with all levels.
• Equipment troubleshooting skills.
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65782 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114