Job Responsibilities:

Be responsible for creating CAD drawings and bill of materials – shipping containers and lifting apparatus.

Able to conduct finite element analysis, and sizing calculations for anti-vibration devices and protective foams.

Able to tabulate the required bill of materials.

Able to assist Procurement Team with Supplier’s enquiry.

Able to work with Production Team or Contractor for the manufacturing.

Able to work alongside Professional Engineer for equipment certification.

Able to write work instruction.

Job Requirements:

Min 3 to 5 years relevant experiences

Proficient in MS Office, Shared Point, & Solidworks.

Proficient in Written and Verbal Communication skills.

Experience with Structural Calculations and Analysis.

Able to write in a clear, concise manner, and generate comprehensive design reports.

Ability to adapt and multi-task.

Relevant work experience in logistics, semi-conductor or electronic industry is an advantage.

Experience in the creation and implementation of continuous improvement program is an advantage.

Able to speak Mandarin as this position needs to communicate with Mandarin speaking counterpart.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Technical Team Lead, Digital Learning Capability Centre (DLCC)

Roles and Key Responsibilities:

SUTD Academy Digital Learning Capability Centre (DLCC) is set up to power up CET Training & learning by developing new cyber-physical digital capabilities for the Continuing Education and Training (CET) sector. We are looking for a technical team lead to join our team that involves the development and testing of new cyber-physical solutions that will be closely integrated with CET activities, courses and programmes under SUTD Academy.

Job Scope:

• Lead the reimagination and productization that integrates video streaming and voice-chat functionalities, ensuring product fit and scalability
• Drive the strategic development of software that supports the automated, concurrent, operation of multiple devices, ensuring seamless integration with learning platforms and modern telecommunication tools
• Refine user experience based on feedback from user studies, ensuring the product aligns with the evolving needs of the learners
• Oversee, guide cross-functional teams, and provide technical expertise including hardware design, software development, and production, to iterate on the product’s hardware and software for large-scale deployment, ensuring that appropriate security and risk factors are considered
• Lead efforts to enhance product adaptability for diverse learning environments, incorporating user feedback from pilot projects
• Assist in conducting user studies, gathering data on product efficacy in real-world applications, and use this data to inform product iterations and improvements
• Provide technical leadership in documenting product development processes, including hardware improvements, software updates, and user experience enhancements for a future-ready product roadmap
• Coordinate with external commercial partners and internal engineering teams to optimize production processes and operation efficiencies
• Assist to conduct cost analysis and create timelines for commercial scaling, ensuring a balance between cost efficiency and quality

Job Requirements:

• Relevant Engineering Degree with at least 5 years relevant experience / Diploma with at least 8 years relevant experience or equivalent
• Extensive experience in leading product development preferably in the tech and education sectors.
• Proven ability to drive full-stack and API development (Javascript, Python, Django, REST APIs) with a focus on building scalable and maintainable systems.
• Expertise in hardware prototyping and integration, including working with microcontroller platforms (Arduino, RaspberryPi, etc.) and electronic systems, ensuring a seamless bridge between hardware and software.
• Experience with manufacturing processes and working with production teams to bring hardware products to market at scale, including CAD tool proficiency (Autodesk Fusion, Rhino, etc.).
• Strong project management skills to coordinate cross-functional teams, manage timelines, and ensure on-time delivery of high-quality products in a fast-paced, dynamic environment.
• Ability to think strategically and creatively, reimagining product functionalities and features to cater to the CET sector's evolving needs, ensuring both technical excellence and market fit.
• Excellent communication and collaboration skills for working with internal stakeholders and external partners, including engineers, designers, educators, and manufacturers.
• Proven track record of problem-solving and innovation, with a strong drive to apply cutting-edge solutions to technical and educational challenges in the CET space.

42SG IT and Pedagogy Assistant (Associate)

As an IT and Pedagogy Assistant at 42 Singapore, you will play a crucial role in maintaining our technical infrastructure and supporting our innovative pedagogical approach. You will work closely with the IT Lead to develop new applications and ensure our local IT infrastructure, comprising 150 computers, adheres to the 42 Network's standards. Additionally, you will be the primary point of contact for students regarding IT and pedagogical matters.

In this role, you will provide technical support to operationalise all aspects of Ecole 42 programme, including but not limited to;

• Install and configure software and hardware
• Manage network servers and technology tools
• Set up accounts and workstations
• Monitor performance and maintain systems according to requirements
• Troubleshoot issues
• Ensure security through access controls, backups and firewalls
• Keep systems updated.
• Develop expertise to train staff on new technologies
• Any other matters as necessary for the smooth operations of 42 programme

Requirements:

Interested applicants should possess the following:

• Experience in the development and usage of APIs.
• Experience in the development for Linux.
• Proficient in programming one or more programming languages such as C, Python, JavaScript, C++.
• Adaptable, resourceful and self-motivated.
• Have a knack for bonding people together and love to work with people
• Should possess a flexible and entrepreneurial nature to work successfully on new programs, contributing experience, intuition, and teamwork to evaluate problems and implement solutions.

Preferred Qualifications:

• Educational Background: Relevant degree in Information Systems or Information Technology or an equivalent field.
• Networking Knowledge: Knowledge of networking, including routing, firewalls (pfSense), and switch configuration (Cisco).
• Monitoring Tools: Familiarity with monitoring tools such as Prometheus and Grafana.
• Virtualization: Experience with virtualization technologies (ESXi / VCenter).
• Deployment Tools: Knowledge of deployment tools (Ansible, Munki).
• Backup Solutions: Experience with backup solutions (Veeam).
• Experience as a System Administrator, Network administrator or similar role

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Responsible for product design and user experience optimization for the AI accounting assistant, defining core functionalities and user workflows to ensure ease of use.
• Design basic UI prototypes and participate in user testing and feedback collection, driving continuous product improvement.
• Work closely with AI and backend engineers to coordinate project development progress, ensuring timely product launch.

Requirements:

• Bachelor’s degree or higher, with a preference for majors in computer science, design, product management, or related fields.
• At least 2 years of experience in product management or UI/UX design; experience in mobile product development is preferred.
• Familiar with writing product requirement documents (PRDs) and basic prototyping skills (such as Figma, Sketch).
• Strong user needs insight, able to quickly identify user needs and translate them into product features.
• Excellent communication and coordination skills; experience in financial or AI products is a plus.

Responsibilities:

• Work closely with customer and internal team during new product introduction to deliver design project
• Coordinate with factory to ensure timely delivery of prototypes during sample builds
• Facilitate DFM activities during development to ensure product is manufacturable
• BOM creation and Maintenance in SAP system (Part addition, BOM Upload, BOM Change)
• Handover of project to factory for mass production

Requirements:

• At least 3 years of working experience in electronics manufacturing environment
• At least a Bachelor’s degree in Engineering
• Good understanding of electronics manufacturing process
• Experience in project / product management
• Fluent in verbal and written communication

Interested candidates are to submit a detailed resume to speed up the application process.

Only shortlisted candidates will be notified. Thank you for applying.

• Proficient in using electrical and manual equipment and measurement tools
• Translate drawings over to workable and buildable projects
• Cut, shape timber according to measurements/requirements
• Installation of wooden fixtures such as cabinets or shelving unit
• Maintenance of differing wooden fixtures or repairs

Responsibilities:

• Review and maintain Safety Management System, Safe Work Procedures, and Risk Assessments.
• Identify improvement areas and monitor implementation of recommended measures through site inspections and team engagement.
• Collaborate with teams to plan, implement, and maintain effective WSHE work plans.
• Investigate WSH infringements and industrial accidents, recommending preventive actions.
• Handle incident reporting, investigations, and propose corrective measures.
• Conduct internal audits to ensure compliance with ISO 9001, ISO 14001, ISO 45001 standards, GGB, ConSASS, and Bizsafe.
• Liaise with relevant authorities on WSH issues.

Requirements:

• Registered WSHO & ECO Officer
• At least 5 working experience in construction industry (design & build/industrial warehouse)
• Working experience with A1 or A2 construction company.

___________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• 5 day work week

• Responsible for assembling and building prototypes

• Medical & Dental insurance & Quarterly Bonus.

 JOB DESCRIPTION

SIGMADESIGN is a fun, fast-paced engineering consulting company currently experiencing explosive growth. We are looking for an Assembly Technician. Curiosity, competency and confidence are a must.

Primary Function :

Responsible for assembling and building prototypes and products utilizing various tools in support of SIGMADESIGN’s engineering production and manufacturing activities. Occasionally provides support in the form of documentation and troubleshooting until units/parts are completed to acceptable test procedures and routing operations.

Essential Job Functions – Responsibilities :

• Performs processes to complete mechanical and electrical assemblies, subassemblies, electrical wiring, and wire harness assembly using common hand tools and electronic lab tooling.
• Tests functional performance of assembly and observes and records results.
• Assembles products according to routings and blueprints; measures parts to specified tolerances.
• Uses hand tools, chemicals and adhesives as needed.
• Maintains and monitors test equipment as necessary to ensure continued accuracy.
• Keeps production supervisors advised of work status, workload, problems and progress as related to work assignments.
• Demonstrate Technical Capacity, Learning Orientation, Time Management, and Thoroughness Skills.
• Maintain a clean and safe work environment including tools and assembly production areas.

Education and Experience: (Knowledge, Skills, & Abilities)

• Minimum NITEC in any Engineering discipline
• Minimum one year of recent direct or related experience required.
• Basic computer literacy skills, basic file structure understanding, and web navigation; working knowledge of Microsoft Office productivity tools including Outlook, Excel, and Word.
• Experience and ability reading and creating simple schematics; able to strictly follow engineering directions or procedures as required.
• Ability to multitask (make progress on multiple unrelated projects) and prioritize workload.
• Detail oriented with a focus on quality, execution and follow through.
• Hands-on skills and mechanical aptitude skills required.
• Excellent written and verbal communications skills.
• Strong basic math skills.
• Experience or familiarity with multimeters, oscilloscopes, and other typical electronic lab equipment a plus.

Work Environment:

Standard lab/production environment. Air-conditioned facility. Occasionally may be required to work in environmental conditions that emulate typical user environments in order to facilitate design testing and validation.

Compensation/Benefits:

• Salary will commensurate according to experience
• Profit Sharing
• Medical & Dental Insurance
• Paid Annual Leave

Click Apply Now for an interview!

Responsibilities:

• Review and maintain Safety Management System, Safe Work Procedures, and Risk Assessments.
• Identify improvement areas and monitor implementation of recommended measures through site inspections and team engagement.
• Collaborate with teams to plan, implement, and maintain effective WSHE work plans.
• Investigate WSH infringements and industrial accidents, recommending preventive actions.
• Handle incident reporting, investigations, and propose corrective measures.
• Conduct internal audits to ensure compliance with ISO 9001, ISO 14001, ISO 45001 standards, GGB, ConSASS, and Bizsafe.
• Liaise with relevant authorities on WSH issues.

Requirements:

• Registered WSHO & ECO Officer
• At least 5 working experience in construction industry (design & build/industrial warehouse)
• Working experience with A1 or A2 construction company.

___________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The Lee Kuan Yew Centre for Innovative Cities at the Singapore University of Technology and Design is seeking a full-time Research Fellow or Research Associate, to join a growing research team dedicated to understanding human behavior in cities.

Successful applicants will contribute to a research program that explores the intersection of human behavior, urban design, technology, and livability. The program tackles critical questions about how cities shape people’s behaviors and, in turn, how cities should be designed to better serve their inhabitants.

Candidates should possess a strong interest in applying a human lens to transdisciplinary and collaborative research. Expertise in quantitative research methods and a background in social and/or behavioral science will be a plus.

This position is ideal for individuals interested in pursuing an academically grounded, applied research career.

The candidate will be expected to:

• Conduct and write literature reviews
• Participate in fieldwork and data collection
• Conduct quantitative and/or qualitative data analyses
• Contribute towards research conceptualization and methodology
• Assist in the preparation of manuscripts and reports for publications
• Collaborate and communicate research updates with both internal and external stakeholders

Skills and qualifications required:

• Obtained or expected Masters degree (for Research Associate) or PhD degree (for Research Fellow) related to the social sciences or behavioural sciences (e.g., Psychology, Behavioral Economics, Urban Studies, or related disciplines)
• Demonstrable skills in quantitative and/or qualitative data collection and analysis
• Excellent written and verbal communication skills
• Strong organizational and data management skills
• Proficiency with statistical software (e.g., R, STATA, SPSS, MPlus) is a plus
• Familiarity with Augmented Reality, Virtual Reality and/or neuroscience (e.g., fNIRS) research is a plus

How to apply:

Interested applicants are encouraged to send their application with the subject heading – Research Fellow/Associate (Urban Psychology Lab) to [email protected] with the following:

• Cover letter explaining your interest in the position and addressing the qualifications and skills requirements (1-2 pages)
• Curriculum vitae
• Two writing samples of publication or research work
• Three referees who may be contacted for a reference

Enquiries about the position can be addressed to either Samuel Chng ([email protected] ) or Sarah Chan ([email protected])

Appointment(s) will be initially made on contract basis for up to two years, renewable subject to good performance and mutual agreement.

We regret that only shortlisted candidates will be notified. Review of applications will commence from October 2024 on a rolling basis. Applications will be considered until the posts are filled.

Carbon Capture Composite Materials

Recruitment for Research Assistant / Research Engineer / Senior Research Assistant

A research assistant position is available at the Singapore University of Technology and Design. The successful candidate will work on the design and synthesis of composite materials for carbon capture applications. The research assistant should have experience in composite material synthesis and fabrication using solution chemistry methods. Desired skills include demonstrated experience with solution-based chemical synthesis, surface functionalization of materials (e.g., ligand exchange, polymer grafting), or polymeric composite fabrication methods. Additionally, the research engineer will also be working closely with the engineering team to implement an innovative gas separation system. The research engineer will also be involved in the development of customized lab-based and field tests to evaluate the performance of the material.

Job Requirements:

• Possesses a Bachelor or Master’s degree in Chemistry/Materials Science/Chemical Engineering or relevant field
• Excellent written and oral communication in English
• Able to work and learn independently and in teams in a multidisciplinary setting
• Possess a high level of personal initiative and motivation

Specific Responsibilities

• Fabrication and characterization of materials
• Lab-based and field tests of composite systems
• Assist with research lab maintenance and safety, as well as managing of lab equipment
• Drafting of professional reports and presenting results to the research team on a regular basis

How to Apply

Applicants should send the following documents:

1. curriculum vitae,
2. two references and
3. a writing sample or examples of any published works including final year projects or thesis to Prof. Mei-Chee Tan, [email protected]

We have several available postdoctoral and research assistant positions at the Singapore University of Technology and Design (SUTD) to work in the area of Robotics. This position focus on supporting the design of algorithm for various robotics applications.

Qualification:
- Relevant Degree in Electrical Engineering, , Mechanical Engineering, Robotics, or related areas
- Strong hands on experience Preference will be given to those with prior robotics project experience such as:
1) SLAM;
2) ROS;
3) Sensor fusion;
4) Machine Learning;
5) Mobile platforms (eg: wheeled robots, legged robots); and
6) Manipulators

Applications, assembled as a single PDF file, should contain a complete resume, full list of publications, as well as the names and contact information of up to three references.

Interested applicants may send his/her CV to Assoc/Prof U-Xuan Tan via email ( [email protected] ). Review of applications will continue until the position is filled. Only shortlisted candidates will be notified.

We are seeking a skilled Mechanical Engineer to join our team in developing the chassis and mechanical components for a state-of-the-art portable MRI system. This role involves the design and integration of high-precision mechanical components, electronic housings, and thermal management systems, focusing on optimizing manufacturability and durability for portability.

The ideal candidate will have expertise in CAD, additive manufacturing (AM) processes, and a strong background in mechanical design for high-tech medical devices or electronics enclosures.

• Design and develop the MRI chassis and mechanical housing for electronic components, ensuring that all designs meet specifications for strength, weight, thermal stability, and compliance. Ensure designs are optimized for manufacturability and assembly, using knowledge of advanced manufacturing techniques.
• Develop detailed CAD models, assemblies, and technical drawings of chassis, mounts, and enclosures using CAD software SolidWorks. Conduct finite element analysis (FEA) and other simulations to assess structural integrity, thermal performance, and material suitability.
• Lead efforts in prototyping, working with AM processes (SLS, SLA, MJF, DMLS, etc.), CNC,or traditional methods to create high-fidelity prototypes.
• Troubleshoot and solve design issues identified during testing, iterating quickly to improve reliability and performance.

Required/Desired Skills

• CAD Proficiency: Advanced skills in 3D CAD software (SolidWorks, Creo, or equivalent) with experience in generating fully constrained assemblies.
• Manufacturing Knowledge: Strong understanding of AM techniques, post-processing methods, and experience working with CNC, sheet metal, and injection moulding.
• Problem-Solving: Demonstrated experience in root cause analysis, DFMEA, and quick iteration on designs to address complex engineering challenges.
• Testing & Analysis: Hands-on experience with FEA tools, prototyping, and validation testing.
• Soft Skills: Strong communication skills, detail-oriented, and ability to work in a cross-functional team environment.

Required/Desired Qualifitaion & Experience

• Bachelor’s or master’s degree in mechanical engineering, Mechatronics, or a related field.
• 3+ years of experience in mechanical design, preferably with medical devices, high-tech enclosures, or electronics housings.

Job Responsibilities

• Collaborate with architects on SoC (System on Chip) architecture discussions and optimizations, focusing on integration and system block development, including areas such as power management, clock/reset, system registers, test control, and PinMux.
• Work with architects and APR (Automated Place and Route) teams on SoC floorplanning, power checks, and timing constraint reviews.
• Provide support for SoC DFT (Design for Testability) and participate in SoC verification planning and verification support.

Job Requirements:

• Bachelor’s or Master’s degree in Electronic Engineering with experience in ASIC design.
• Proficiency in ASIC design flow, including RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure, and verification.
• Solid understanding of DFT principles and practices.
• Experience in a UNIX/Linux environment with scripting skills.

Interested candidates kindly click the APPLY NOW button.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Xie Jiani (R1548854)

EnviroDynamics Solutions Pte Ltd

EA License No.: 12C6285

Job Responsibilities

i. Design and Development

• Design material handling systems and components for wafer probers, including wafer loading, unloading, transport, and alignment mechanisms.
• Develop detailed engineering drawings,specifications, and 3D models using CAD software.
• Conduct feasibility studies and simulations to validate design concepts and performance.

ii. Prototyping and Testing

• Build and test prototypes to evaluate the performance and reliability of designs.
• Conduct experiments and tests to ensure that material handling systems meet performance criteria and industry standards.
• Analyze test results and make necessary design adjustments to improve functionality and efficiency.

iii. Collaboration and Communication

• Work closely with cross-functional teams, including mechanical, electrical, and software engineers, to integrate material handling systems with wafer probers.
• Communicate design concepts, progress, and issues to stakeholders and team members.
• Collaborate with manufacturing teams to ensure designs are feasible and optimized for production.

iv. Innovation and Improvement

• Stay updated with the latest advancements in material handling technology and semiconductor industry trends.
• Identify opportunities for innovation and continuous improvement in material handling solutions.
• Implement feedback from field tests and customer use to refine and enhance designs.

v. Project Management

• Manage design projects from concept to completion, ensuring timelines and quality standards are met.
• Prepare and maintain project documentation, including design reports, test plans, and technical manuals.
• Coordinate with project managers and other engineers to align with project goals and deadlines.

vi. Compliance and Safety

• Ensure all designs comply with industry standards, safety regulations, and company policies.
• Conduct risk assessments and implement safety measures in design and testing processes.
• Document and address any potential hazards associated with material handling systems.

Required Skills and Qualifications

i. Technical Skills

• Proficiency in CAD software (e.g., SolidWorks, AutoCAD) for designing mechanical components.
• Strong understanding of material handling principles and technologies.
• Knowledge of mechanical systems, robotics, and automation in the semiconductor industry.

ii. Analytical and Problem-Solving Skills

• Strong analytical skills to assess system performance and identify areas for improvement.
• Ability to troubleshoot and resolve complex design issues.
• Excellent problem-solving skills and attention to detail.

iii. Education and Experience

• Bachelor’s or Master’s degree in Mechanical Engineering, Mechatronics, or a related field.
• Relevant experience in designing material handling systems, preferably in the semiconductor industry.
• Experience with wafer probers or semiconductor testing equipment is advantageous.

iv. Soft Skills

• Excellent communication and teamwork skills.
• Ability to work independently and manage multiple projects simultaneously.
• Strong organizational skills and a commitment to producing high-quality work.

Additional Responsibilities

· Supplier and Vendor Management

• Work with suppliers and vendors to source high-quality components for material handling systems.
• Evaluate and select suppliers based on quality, cost, and reliability.
• Manage relationships with suppliers to ensure timely delivery of components and materials.

· Training and Support

• Provide technical support and training to manufacturing and maintenance teams on material handling systems.
• Develop and maintain training materials and technical documentation for end-users.
• Assist in the resolution of customer issues related to material handling systems.

· Sustainability and Efficiency

• Promote sustainable practices and environmental responsibility in design activities.
• Identify and implement measures to improve efficiency and reduce waste in material handling processes.
• Conduct regular reviews and audits to ensure compliance with sustainability goals.

- Makes any necessary changes to existing models or drawings

- design drawings using CAD

- Provide technical support to various personnel as needed

- Work closely with engineers to ensure drawings and models meet design requirements and specifications

- Ability to operate computer-aided design (CAD) software and manual drafting workstation

- Ability to multitask and manage several projects at a time

Job Responsibilities

1. System Design and Development

• Design motion control systems, including hardware and software components.
• Develop and test control algorithms for precision motion systems.
• Create detailed design specifications and documentation.

2. Component Selection and Integration

• Select appropriate sensors, actuators, motors, and controllers for the motion control system.
• Integrate components to ensure seamless operation and optimal performance.
• Work with suppliers and vendors to source high-quality components.

3. Simulation and Testing

• Conduct simulations to predict system behavior and validate design choices.
• Develop and implement testing protocols to evaluate system performance.
• Troubleshoot and resolve issues identified during testing.

4. Collaboration and Communication

• Work closely with cross-functional teams, including mechanical, electrical, and software engineers.
• Communicate design concepts and progress to stakeholders.
• Collaborate with manufacturing teams to ensure designs are feasible and cost-effective.

5. Optimization and Improvement

• Continuously improve motion control systems for better efficiency, accuracy, and reliability.
• Stay updated with the latest advancements in motion control technology.
• Implement feedback from field tests and customer use to refine system designs.

6. Project Management

• Manage project timelines, budgets, and resources.
• Ensure projects meet deadlines and quality standards.
• Coordinate with project managers and other engineers to align with project goals.

Required Skills and Qualifications

1. Technical Skills

• Proficiency in motion control technologies and principles.
• Experience with CAD software for designing mechanical and electrical components.
• Knowledge of programming languages (e.g., C/C++, MATLAB, Python) for developing control algorithms.
• Familiarity with PLCs (Programmable Logic Controllers) and HMI (Human-Machine Interface) systems.

2. Analytical and Problem-Solving Skills

• Strong analytical skills to assess system performance and identify areas for improvement.
• Ability to troubleshoot complex motion control issues.

3. Education and Experience

• Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Robotics, or a related field.
• Relevant experience in designing and implementing motion control systems.

4. Soft Skills

• Excellent communication and teamwork skills.
• Strong organizational and project management abilities.
• Attention to detail and a commitment to producing high-quality work.

Additional Responsibilities

• Compliance and Safety

• Ensure all designs comply with industry standards and safety regulations.
• Conduct risk assessments and implement safety measures in system designs.

• Innovation and Research

• Engage in research and development to explore new motion control technologies.
• Innovate and propose new solutions to enhance system performance and capabilities.

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

Job Descriptions:

• Handle interior design & renovation inquiries.
• Discuss and propose professional advice on interior design, space planning, design conceptualization, and material selection to prospective clients.
• Prepare proposal and quotation based on client requirements and design.
• Manage and coordinate project progress from inception to completion.
• Site supervision and project coordination.
• Work closely with subcontractors and suppliers to ensure the project works smoothly.
• Schedule workflow to meet customer move-in date.

Requirements:

• At least one (1) year of working experience in Interior Design or Sales.
• Graduates in interior design or related fields are welcome.
• Have a passion for design and creativity in Interior Design.
• Independent with sales and target-driven mindset.
• Positive attitude and takes pride in your work.
• Responsible & Reliable.
• Customer-oriented with excellent communication skills.

Job Highlights:

• Training Provided.
• Option for Full Commission-based or Basic + Commission for the first 6 months only.
• Income with no ceiling cap.
• Incentive Rewards for a high performer.
• Quality sales lead provided.
• Strong In-House Team to support, including Marketing, Drafter, Accounts, HR, and admin.
• Company incentive trips.
• Friendly and supportive working environment.

Working Location:

• West Showroom (Tradehub 21)
• Central Showroom (Balestier)
• East Showroom (AZ@Paya Lebar)

If you do not possess the above but think you want to give Interior Design a shot, do hit us up.

We would love to have a chat!

Tasks & Responsibilities

• Prepare electrical calculations, cost estimates, and technical curves for tender submissions.
• Analyze design requirements and ensure compliance with relevant standards.
• Collaborate with clients to gather requirements and provide technical support and specifications throughout the tender lifecycle.
• Work with suppliers and contractors to obtain quotes for special accessories and equipment.
• Prepares electrical design and winding Bill of Materials (BOM) for transformers manufacturing, including schematics and layout drawings.
• Conduct feasibility studies and simulations to optimize design performance.
• Support ac-hoc work such as site surveys, technical meetings and approval drawing preparation etc.

----------------------------------

Qualifications & Experience

• Bachelor’s degree in Electrical and Electronic Engineering or an equivalent qualification, preferably with a major in electrical power engineering.
• Proficiency in programming languages such as C, C++, etc., is a plus.
• Knowledge of computer-aided design (CAD) software, including AutoCAD 2D/3D.
• Familiarity with transformer industry standards, such as IEC and IEEE.
• Excellent team player with an open mindset and a collaborative spirit.
• Demonstrates flexibility and adaptability to meet project timelines.
• Ability to work independently with minimal supervision.

Job Title: Design /Senior Engineer (Mechanical / Electrical / Stress)

Department: Engineering

Reports To: Engineering Manager, Project Lead

SUMMARY:

We are seeking a motivated and detail-oriented Design Engineer to join our Engineering team. In this role, you will support the engineering team in the research, design, and validation of mechanical, electrical, payload, systems, and structural designs. You will contribute to the development of engineering packages for aircraft production, retrofits, and product innovation, using established processes and design standards.

KEY RESPONSIBILITIES:

- Assist in executing design tasks, including aircraft design, mechanical/electrical/structural systems installations, assemblies, and system specifications under the supervision of senior engineers.

- Modify and maintain basic mechanical/electrical/structural systems following defined project requirements and design standards.

- Collaborate with project teams to support the development and documentation of design solutions.

- Interpret and analyze OEM installation drawings and troubleshoot basic technical issues.

- Ensure compliance with internal design standards and external regulatory requirements.

- Actively contribute to team goals and support departmental initiatives.

- Liaise with cross-functional teams to ensure project alignment.

- Domestic and international travel may be required occasionally.

QUALIFICATIONS:

To be successful in this role, you will need to meet the following criteria:

Education and Experience:

- Bachelor’s degree in Mechanical/Electrical Engineering, Aerospace Engineering, or a related field.

- Min 3 years of experience in an engineering or aviation-related role.

Core Knowledge:

- Engineering Principles: Practical understanding of engineering concepts, techniques, and technology as applied to design and production.

- Design Proficiency: Competency in Computer-Aided Design (CAD), with the ability to read and interpret technical drawings and specifications.

- Team Collaboration: Ability to work effectively within a team, accepting roles, responsibilities, and accountability.

SKILLS:

- Problem Solving: Identify and resolve complex problems, analyzing relevant information and exploring options.

- Critical Thinking: Apply logical reasoning and scientific methods to develop solutions.

- Mathematics: Strong grasp of mathematical concepts, including trigonometry, percentages, ratios, and the use of spreadsheet formulas.

- Customer Orientation: Prioritize customer needs, responding promptly and meeting high standards for both internal and external stakeholders.

- Communication: Strong verbal and written communication skills, with an ability to clearly convey technical information.

- Attention to Detail: Carefully review and analyze drawings, specifications, and project data to ensure accuracy.

- Judgment and Decision-Making: Evaluate potential courses of action and choose the most effective solution.

- Time Management: Manage time efficiently, balancing multiple tasks and priorities.

- Positive Attitude: Maintain professionalism and demonstrate a commitment to continuous skill improvement.

ADDITIONAL REQUIREMENTS:

- High attention to detail and a commitment to accuracy.

- Ability to work effectively within a team and meet assigned responsibilities.

- Proficient in using Windows-based computer systems.

- Must accurately report time worked in the company's tracking system daily.

- Willingness to pursue ongoing professional development and skill enhancement.

This is an excellent opportunity to grow in the aerospace and engineering fields, contributing to high-impact projects while developing your technical expertise.