a) Minimum Degree in Civil Engineering recognised by PEB

b) Registered Resident Engineer by IES preferred

c) Min. 3 years experience in LTA project or equivelant

1. To act as a Site Supervisor appointed by the Qualified Person (QP) in accordance with the Building Control Act.

2. To assist the QP(Supervision) in carrying out supervision works on site

3. To prepare inspection and test plans which are relevant for the supervision of the projects.

4. To conduct quality control of all civil and structural, as well as, mechanical, electrical, and landscaping works.

5. To inspect and advise for compliance on temporary works, including instrumentation reports by Contractor.

6. To support in public relations works.

7. To supervise and keep independent records of day works including overall and part works programme.

8. To issue site memo to Contractor for recording of observed safety and quality non-compliance with Contract or Authorities, Services Agencies requirements.

9. To attend project meetings and draft meeting minutes.

10. To carry out site supervision and inspection of works including any off-site manufacturing/testing as instructed by the QP(Supervision) and/or S.O. so as to ensure that works are constructed to the required quality, accuracy and standards.

11. To monitor progress of the works on site including material supply to the site and at any off-site manufacturing/testing facilities and report delays immediately.

12. To provide standing supervision in compliance with the relevant Building Control Regulations.

13. To maintain proper and updated daily records of all works done, including independent record of test, inspections, status of work, safety, site diary, material and equipment on site, labour, dayworks, provisional quantities etc.

14. To check that the Contractor executes preliminary items.

15. To check service routes and Contractor’s setting out and report any deviations to the QP(Supervision)/S.O.

16. To verify reports and claims submitted by Contractors.

17. To record all variations as instructed or approved by the S.O.

18. To undertake any other duties related to the project as and when instructed by the S.O./Client/QP(Supervision).

19. To check drawings including as-built and documents and report discrepancies.

20. Report on site safety, security and housekeeping.

21. Verification of the Client’s Permit To Works (CPTW) checklist completed by the Contractor including:

i. Review the CPTW and keep records of relevant documents such as Authorities/Agencies

approvals, services detection plan and etc. on site.

ii. Make yourself aware of the contractor daily site works and remind them to provide the CPTW

for your verification prior to commencing works on site.

iii. Inform the Contractor in-writing of any non-compliance identified by the CPTW and ensure that

the Contractor rectify the non-compliance prior to permitting works to commence.

iv. Inform the S.O./ QP(Supervision) immediately if the Contractor proceeded works on site without a valid CPTW.

22. Any others duties specified under Building Control Acts and relevant scope

23. Any other work incidental to the above and/or reasonably to be inferred from the nature of work to be carried out by the Service Provider Field staff; and,

24. Such other work as may be agreed from time to time.

25. In addition to the principal duties detailed above, the Field Staff is expected to be vigilant and monitor the Contractor performance in progress, site safety, services protection, security and hygiene.

• Salary range: $5000 - $7000
• Work location: Jalan Kayu [Sengkang]
• Working Days: 5.5 Days [Alternate Saturday]
• Working Hours: 9am - 6pm // 9am - 1pm

Responsibilities:

• Study tender specifications and highlight what needs to be captured in costing
• Check tender drawings, go through with QS on what are the items to take off, supplier quotations to request (especially for special systems like foam, linear heat, video smoke imaging)
• Check tender clarifications / addendums for any design changes and advise cost impact
• Highlight design deficiencies in tender drawings
• Work out design and quantities for D&B tenders
• Provide technical guidance & training for QS
• Coordinate with Project / Zenith / A&A team for design queries when handing over jobs

Requirement:

• Relevant experiences

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Responsibilities:

• Prepare and submit tender proposals, including cost estimates, bill of quantities, and pricing schedules.
• Review and analyze project specifications and drawings to accurately determine project requirements.
• Collaborate with project teams to develop accurate and competitive tender submissions.
• Liaise with clients, consultants, and subcontractors to gather necessary information for tender preparation.
• Compile and submit quotations for projects, including all necessary materials and services.
• Review and negotiate subcontractor and supplier contracts.
• Ensure compliance with industry standards, regulations, and company policies.
• Accurately certify and validate progress claims submitted by contractors.
• Take responsibility for managing the final account.

Requirements:

• Degree or Diploma in Quantity Surveying, Construction Management, or related field.
• Minimum 5 years of experience in tendering and quantity surveying in the interior design/construction industry.
• Strong analytical and problem-solving skills.
• Excellent communication and negotiation skills.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

Responsibilities

· Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)

· Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation

· Verify Logic at ISP level and Digital System level

· Optimize Design for less gate count and low power consumption

· Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

· Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience

· Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)

· Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.

· Strong debugging and problem-solving skills

· Good communication and interpersonal skills

· Result oriented and embrace change behaviours

Job Title: 3D Drafter (Interior Design)

Location: Jurong East, West Region, Singapore

Company Overview: Francyn Atelier by Chariots Capital, a dynamic start-up company revolutionising the interior design industry in Singapore, is proud to announce our new venture with an office spanning 1,700 square feet. We are a dynamic start-up company revolutionising in interior design services for commercial spaces, landed properties, and residential projects. Committed to creativity and innovation, we are seeking a talented 3D Drafter to join our team and contribute to the realisation of our clients' visions. This is an exciting opportunity to join a fast-paced start-up environment and play a key role in shaping the future of interior design in Singapore.

Position Overview: As a 3D Drafter (Interior Design), you will play a crucial role in translating conceptual designs into visually stunning 3D renderings. With your expertise in interior design and proficiency in 3D modelling software, you will bring our clients' projects, to life and ensure that every detail is meticulously crafted to perfection.

Key Responsibilities:

1. Conceptualisation and Visualisation: Work closely with our design team to conceptualise and develop interior design concepts for commercial spaces, landed properties, and residential projects. Translate these concepts into detailed 3D renderings that accurately convey the intended aesthetic and spatial layout.
2. 3D Modelling and Rendering: Utilise your proficiency in 3D modelling software (e.g., AutoCAD, V-Ray, 3ds Max) to create realistic 3D models of interiorspaces, furniture, fixtures, and architectural elements. Apply textures, lighting, and rendering techniques to produce high-quality visualizations that showcase design concepts effectively.
3. Portfolio Development: Maintain and update your portfolio with samples of your previous work, highlighting your expertise in designing commercial spaces, landed properties, and residential projects. Present your portfolio during client meetings and project presentations to demonstrate your capabilities and inspire confidence in our design solutions.
4. Collaboration and Communication: Collaborate closely with the design team, project managers, and clients to understand project requirements, incorporate feedback, and ensure alignment with project timelines and objectives. Communicate effectively to convey design concepts and address any concerns or questions that may arise during the design process.
5. Quality Assurance: Conduct thorough quality checks on 3D renderings to ensure accuracy, consistency, and adherence to design standards. Make revisions as necessary to meet client expectations and project specifications, ensuring that the final deliverables exceed client satisfaction.

Qualifications

• Bachelor's degree in Interior Design, Architecture, or related field.
• Minimum of 2 years of experience as a 3D Designer in the interior design industry, with a focus on commercial spaces, landed properties, and residential projects.
• Proficiency in 3D modelling software such as AutoCAD, V-Ray and 3ds Max.
• Strong portfolio showcasing your 3D design skills and experience in commercial, landed, and residential projects.
• Excellent communication and presentation skills.
• Ability to work collaboratively in a team environment and adapt to changing project requirements.
• Attention to detail and a passion for delivering high-quality design solutions.
• Working rights required for this role.
• Preferably able to start work immediately.

Benefits:

• Competitive salary with performance-based incentives.
• Collaborative and inclusive work environment.
• Opportunities for professional development and career advancement within a dynamic SME environment.
• Exciting projects and the opportunity to contribute to the success of diverse interior design projects.
• Opportunity to make a significant impact and drive growth within a growing interior design SME.

If you are a creative and talented 3D Drafter with a passion for interior design and a portfolio that showcases your expertise in commercial spaces, landed properties, and residential projects, we invite you to apply for this rewarding opportunity.

Responsibilities

• Maintaining and updating of data records, filing of documents, inventories etc.
• Preparation of resources for the teaching of Art, English, and other Departments (where applicable) and the General Office.
• Assist in any administrative and operations dutiesas assigned by the Admin Manager and School Leaders.

Requirements

• At least 3 GCE ‘O’ level passes including English.
• Good communication and inter-personal skills
• Good team player
• Proficient in Microsoft Office Application
• At least have 2 years of experience working in a school environment.

For quick response please mail your resume to [email protected]

Design Manager

• Working Days: Monday to Friday
• Working Hours: 8.30am to 6pm
• Office Location: Eunos (409459)
• Salary: $4000 - $6000

Job Description:

As a Design Manager, you will play a pivotal role in guiding and supervising junior designers, ensuring the highest standards of creativity and quality are maintained. You will collaborate closely with the top management, interior designers, other related teams to provide creative direction, solutions, and support throughout the project lifecycle. Your role will encompass both project management and design leadership.

Key Responsibilities:

Design Direction and Presentation:

• Provide design guidance, creative direction, and innovative proposal to meet client requirements.
• Present and effectively communicate design intent during client pitches and project discussions.

Client Management:

• Efficiently handle multiple projects concurrently, overseeing them from start to finish, including sales, design, and execution phases.
• Ensure that projects are completed on time and meet client expectations.

Design Implementation

• Conceptual design for pitching projects, including mood board, rendering.
• Translate design concepts into detailed plans, ensuring that aesthetic intent aligns with technical feasibility.
• Collaborate with design principal, and clients, qualified Persons and vendors to refine and finalize design details.
• Collaborate with MEP engineers to ensure the seamless integration of mechanical, electrical, and plumbing systems within the interior design.
• Produce comprehensive construction drawings, including floor plans, elevations, sections, and details, with a focus on precision and clarity.

Building Management Submissions:Prepare and submit drawing package required for approvals

• from building management.
• Coordinate with QP for submission to relevant authorities.
• Manage the submission process, tracking progress, and ensuring timely approvals.

Project Design Coordination:

• Coordinate with project teams to integrate architectural, structural, MEP, and interior design elements seamlessly.
• Coordinate with procurement team to select feasible materials for design implementation.
• Collaborate with Project Leaders from project initiation to completion, offering design expertise and insights.
• Attend adhoc meetings related to design and project matters, including client meetings, project meetings, and site visits.
• Monitor the implementation of design intent on-site and provide guidance or recommend design changes as necessary.

As-Built Submissions:

• Ensure that all design changes and solutions are seamlessly integrated into project documentation.
• Oversee the creation of accurate as-built drawings, reflecting the final state of the project post-construction.
• Ensure that as-built submissions are complete and comply with relevant industry standards.

Requirements:

• A recognized Degree/Diploma in Interior Design or an equivalent qualification.
• Proficiency in a range of design-related software, including Hand Sketch, Sketchup, AutoCAD, and similar tools.
• A minimum of 5 years of relevant experience in commercial design, showcasing strong technical knowledge in areas such as shop drawings, site surveys, and detail drawings.
• Experience in managing projects from start to finish, encompassing sales, design, and execution.
• Willing to travel overseas

If Interest please kindly click on the Apply button

Ong Choon Kiat (James) | Reg No: R22104989

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Our client is a leading channel partner for games and entertainment software in Asia. Due to business needs, they are now recruiting a Senior HR Manager to be part of their HR team for ongoing transformation projects. They are located in the East Area - easily accessible.

Roles and Responsibilities:

• Lead the full spectrum of HR, administrative, and facility functions.
• Develop and implement HR policies, ensuring alignment with organizational objectives and legal requirements.
• Effectively communicate and enforce HR policies across the organization.
• Manage complex employee relations issues, including dispute resolution and disciplinary actions.
• Cultivate a positive work environment, fostering employee engagement.
• Drive the recruitment process, collaborating with hiring managers for successful staffing.
• Contribute to the design and implementation of training and development programs.
• Identify opportunities for career growth and succession planning.
• Administer compensation and benefits programs, ensuring competitiveness and compliance.
• Conduct periodic compensation and benefits surveys for market competitiveness.
• Support the performance management process, including setting objectives and conducting appraisals.
• Provide guidance on performance-related matters to managers and employees.
• Generate HR reports, analyze data, and provide insights for decision-making.
• Ensure compliance with data privacy regulations and maintain employee records.
• Stay updated on labor laws and employment regulations for HR practice compliance.
• Assist in investigations and audits related to HR matters.
• Develop and implement employee engagement initiatives.

Requirements:

• Degree in Human Resources or related
• Relevant experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

We are an interior design company located at AZ@Paya Lebar

Duties

• Data Entry, maintaining and entering information into database

• Performing general office admin duties and errands

• Assisting organize and maintain office common area

• Good knowledge of MS Office (e.g Microsoft excel)

• Answer and direct phone calls

• Perform other ad-hoc duties as assigned from time to time

Job Description

• Industry/ Organization Type: Engineering/Manufacturing
• Position Title: Mechanical Design Engineer/Hydraulic Systems Engineer
• Working Location: Tuas
• Working Hours: 5.5 days’ work (Mon – Fri: 8 am to 5 pm, every alternate Saturday 8 am to 5 pm)
• Salary Package: Up to $3500 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Develop designs for a variety of mechanical structures and hydraulic systems.
• Analyze and interpret mechanical and hydraulic design schematics.
• Ensure individual tasks are completed efficiently and on schedule.
• Collaborate effectively with Sales, Projects, and Operations teams.
• Follow ISO 9001 standards for design and processes, constantly seeking quality improvement.
• Undertake additional tasks as directed by management.

APPLY NOW!!!

• Degree/Diploma in Mechanical Engineering / Pipe Engineering.
• Minimum of 3 years of experience in a relevant field.
• Proficiency in hydraulic systems and AutoCAD 2D & 3D design software.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66202 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Responsibilities:

- Prepare material requisition lists for job requirements.

- Plan and design electrical switchboards, consoles and control panels according to customer's requirements and company standards.

- Prepare approval drawings, shop drawings, final drawings / documents, short circuit calculations, instruction manuals as required for submission to clients and shop floor production.

- Co-ordinate with clients and consultants on the technical requirements. Attend technical discussions with clients and consultants when required.

- Feed back to Sales & Marketing Department on the changes of technical requirements by clients for claims of additional costs and time.

- Check and follow-up on design and shop drawings with production departments.

- Develop and improve on design of electrical switchboards, consoles and control panels. While taking note of quality, standard, cost effective designs are to be considered.

- Assist and advise Sales & Marketing Department on technical matters, provide technical backup for securing of contracts.

- Carry out other responsibilities as and when assigned by the superiors.

- Follow the procedures of design control, documentation and data control, and quality system of the total Quality Management System

Job Requirements:

- Diploma in Electrical or equivalent

- 1 – 2 years of relevant experience

- No experience are welcome to apply

- Relevant experience with Switchboard Design

- Able to start work immediate

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

The job comes under NPI Operations and supports Product & Test Engineers in test development, product qualification & manufacturing release. Additionally, the job supports production & planning teams to make use of spare capacity for revenue attainment purpose. The scope covers managing Marvell testers, handlers, probers & hardware with focus towards operational readiness and continuous improvement.

What You Can Expect

In this (hybrid/remote/in-office) role in LOCATION, you’ll build transistor level circuits from scratch or be given existing blocks to improve or port. Using a variety of CAD tools, but primarily Cadence, you will build or improve your circuit, simulate different performance metrics and measure other parameters. You’ll do circuit analysis and if your circuit looks good, you’ll send it to layout for physical design. Once it’s created, you get it back, run simulations and tests, and continue iterating until the circuit performs precisely as you need it to. You’ll attend

weekly meetings with your team to discuss your projects at a high level. If any issues arise, the team may take a more focused look at the problem to work out a solution. You’ll also attend meetings with senior designers and managers to review your work at a detailed level. On this team, you’ll have the opportunity to see your designs go from an idea all the way through production and into use by other groups at Marvell.

What We're Looking For

To be successful in this role you must:

- Have completed a Bachelor’s Degree in Electrical Engineering and have 1-3 years of related professional

experience OR a Master’s Degree and/or PhD in Electrical Engineering.

- Your education must show further specialization into Analog Design.

- You must be willing to learn additional aspects of Analog Design from your peers and be willing to share your

knowledge with others as well.

This team collaborates a great deal.

- You must understand the fundamental theory behind circuit design.

- You must have some experience with CAD tools from school. If your school allowed you to use Cadence also,

that’s helpful but not required. You can learn that on the job.

Additional Compensation and Benefit Elements

With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

For interested applicant, click 'apply'

EA Reg no: R1328476

EA License No: 16C8443

EA Personnel Name: Melody
EA Personnel No: R2095899

Design Manager (Commercial Renovation)

• Working Days: Monday to Friday
• Working Hours: 8.30am to 6pm
• Office Location: Eunos

• Salary: S$4,000 - S$6,000

Job Description:

As a Design Manager, you will play a pivotal role in guiding and supervising junior designers, ensuring the highest standards of creativity and quality are maintained. You will collaborate closely with the top management, interior designers, other related teams to provide creative direction, solutions, and support throughout the project lifecycle. Your role will encompass both project management and design leadership.

Key Responsibilities:

1. Design Direction and Presentation:Provide design guidance, creative direction, and innovative proposal to meet client requirements.
   Present and effectively communicate design intent during client pitches and project discussions.
   
2. Client Management:Efficiently handle multiple projects concurrently, overseeing them from start to finish, including sales, design, and execution phases.
   Ensure that projects are completed on time and meet client expectations.
   
3. Design Implementation:Conceptual design for pitching projects, including mood board, rendering.
   Translate design concepts into detailed plans, ensuring that aesthetic intent aligns with technical feasibility.
   Collaborate with design principal, and clients, qualified Persons and vendors to refine and finalize design details.
   Collaborate with MEP engineers to ensure the seamless integration of mechanical, electrical, and plumbing systems within the interior design.
   Produce comprehensive construction drawings, including floor plans, elevations, sections, and details, with a focus on precision and clarity.
   
4. Building Management Submissions:Prepare and submit drawing package required for approvals from building management.
   Coordinate with QP for submission to relevant authorities.
   Manage the submission process, tracking progress, and ensuring timely approvals.
   
5. Project Design Coordination:Coordinate with project teams to integrate architectural, structural, MEP, and interior design elements seamlessly.
   Coordinate with procurement team to select feasible materials for design implementation.
   Collaborate with Project Leaders from project initiation to completion, offering design expertise and insights.
   Attend adhoc meetings related to design and project matters, including client meetings, project meetings, and site visits.
   Monitor the implementation of design intent on-site and provide guidance or recommend design changes as necessary.
   
6. As-Built Submissions:Ensure that all design changes and solutions are seamlessly integrated into project documentation.
   Oversee the creation of accurate as-built drawings, reflecting the final state of the project post-construction.
   Ensure that as-built submissions are complete and comply with relevant industry standards.
   

Requirements:

• Min Diploma in Interior Design or an equivalent qualification.
• Proficiency in a range of design-related software, including Hand Sketch, Sketchup, AutoCAD, and similar tools.
• Relevant experience in Commercial Design, Showcasing strong technical knowledge in areas such as Shop Drawings, Site Surveys, and Detail Drawings.
• Experience in managing projects from start to finish, encompassing sales, design, and execution.
• Willing to Travel Overseas

WhatsApp or Email me your latest resume for Immediate Interview Arrangement.

Whatsapp: +65 80231200

✉ [email protected]

Daniel Wong Reg No: R2095781

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

- Manage a team of 3 to 5 designers

- Manage design projects and timeline

- Guide designers on design concepts

- Scheduling of designer’s work load

- Write and respond to new briefs and brief designer

- Check in on designer’s WIP

- Check Designers’ work and review

- Send to Project Managers in powerpoint slide format / PDF for proposals

Skills and Experience

- Graduated from design based courses

- Have at least 3 – 5 years of relevant experience in related industry (Design/Events/Print)

- Intermediate knowledge and skills in Adobe Suites (AI, Indesign, Photoshop)

- Strong knowledge of design principles, typography and branding

- Strong print production knowledge is an added advantage

- Knowledge and skills in video production will be a bonus

- This is hybrid position

- Daily morning huddle

- Weekly Summary of projects on hand in excel

Personal Attributes

- Creative and ability to think of unique and appealing concepts

- Excellent People Management skills

- Pleasant disposition and positive attitude

- Attention to detail

- Must have sense of urgency and be responsive

- Responsibility and accountability to work

- Comfortable working in a fast-paced environment and Self motivated

Job Description:

• Plan and control the delivery of project design to ensure the achievement of quality, completion and project objectives.
• Select and engage, then monitor the performance of external design partners within the discipline including their deliverables, cost and timeframes.
• Manage the design approval process in accordance with project requirements and program
• Prepare budgets and schedules of design delivery for management approval then manage and report the cost of design delivery in the project life cycle.
• Manage design to ensure the cost of the works meets project requirements.
• Manage and review milestone deliverables from the Design Consultants to ensure the compliance and adherence to project schedule, scope and Design Brief, Stakeholders’ requirements and comments, statutory codes and regulations, and company guidelines.
• Obtain, review and consolidate Stakeholders’ feedbacks on stage deliverables, and relay such feedbacks as directives to Consultants.
• Manage client and stakeholder expectations and communicate effectively with the project team.
• Supervise the work of subordinate design and drafting staff to ensure project requirements are met.
• Select and develop design management staff within the project by providing leadership and mentoring to ensure their design management competencies.
• Understand design compliance and reporting procedures and processes and leadership in the communication of requirements.
• Foster the interaction between design and construction teams to maximise innovation and project success.

Job Requirement:

• Recognised Degree in Civil Engineering
• Minimum 15 years of engineering experience in the construction industry with 8 years of experience in the design of civil and structures of building related projects
• Experience in LTA and SMRT project will be advantage.
• Good interpersonal, communication, and organisational skills
• Resourceful, self-driven, proactive, and able to foster collaboration
• Able to work well independently and as a team

We are currently seeking a passionate and dedicated Art and Craft Teacher to join our team and inspire the next generation of creative minds. The ideal candidate will have a strong background in arts and crafts, a love for teaching, and the ability to foster a positive and engaging learning environment for our students.

Responsibilities:

• Plan and deliver innovative and engaging art and craft lessons tailored to students' age and skill level
• Nurture students' creativity, self-expression, and artistic development
• Provide a safe and inclusive learning environment that encourages exploration and experimentation
• Offer constructive feedback and guidance to help students refine their skills and techniques
• Communicate with parents regarding student progress and upcoming projects
• Collaborate with fellow teachers and staff to create a supportive and dynamic teaching community
• Manage basic administrative duties such as attendance tracking, materials inventory, and lesson documentation

Requirements:

• Prior experience in teaching art and craft or a related field
• A strong portfolio showcasing a variety of artistic techniques and mediums
• Excellent communication and interpersonal skills
• A genuine passion for working with children and fostering their creative development
• Strong organizational and time management skills
• Flexibility to work at various locations as needed

If you are an experienced artist with a love for teaching and a desire to inspire young minds, we would be thrilled to have you on our team. Apply now and make a lasting impact on the lives of our students!

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects.

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.

· To prepare final design configurations, layouts, solid models and production/engineering data.

· To assist in preparation of machine documentation, specifications, manual.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, resourceful and organized.

Job Requirements:

· Degree or relevant in Mechanical Engineering.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable.

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

· Able do the night shift and 24 hour emergency call.

• To achieve and grow assigned categories sales in line with the company objective.
• Follow up on payment collection and resolve dispute (if any)
• Work closely with operations and merchandisers to ensure timely execution based on activities planned for key customers.
• To maintain strong relationships with existing/new customers to explore opportunities to expand distribution.
• To identify opportunities for portfolio expansion with existing or new customers
• Track and provide market intelligence info on competitors activities and New Product Developments.
• Support New Product Developments launches.
• Kueh and Pastry sales and distribution strategies via various channels (such as retail, F&B and e-commerce etc)

Requirements:

• Minimum education qualification - ITE education
• Service and people-oriented individual
• Strong sense of responsibility and able to work under pressure
• Committed and passionate in building business.
• Computer literate – Microsoft Office
• Preferably 1 years of sales experience in the retail / F&B industry

Job Highlights

5 Days week

Location: Tai Seng MRT

Equipment Engineer (Design/ RCFA/ Oil&Gas)

12-Month Contract

Location: Jurong Island

Salary Up to $7000 depending on experience

Industry : Oil & Gas

Our client is one of the world's largest publicly traded international oil and gas companies. They are actively looking for Machinery Engineer to join their operations.

Job Summary:

• Evaluate and comment on discipline engineering work performed both internally and by Contractors and sub-contractors to ensure that work is being executed in accordance with Company specifications, company standards, and regulatory requirements.
• Facilitates effective execution of discipline engineering and design routines that align with the team's goals, objectives, and procedures.

Responsibilities:

• Ensure compliance to company's site safety and controls protocols.
• Taking care of day to day issue, drive RCFA and bad actor program. Provide timely inputs to long range items including AMP, Turnaround, technology improvements, etc.
• Facilitate and coordinate discipline engineering technical work products
• Coordination and communication of various issues among the company's and contractor's engineering team that affect the discipline engineering design, safety, and regulatory compliance of the work
• Evaluate / comment work performed by the Contractor and sub-contractors to ensure that the work is being executed in accordance with Company specifications, standards, and regulatory requirements. Includes review of discipline design drawings and documents
• Identify and assess deviations to Contract Technical Specifications and regulatory requirements; ensure that such deviations will be processed according to Company procedures; maintains Deviation Control Log.
• Steward discipline engineering queries from the Contractor and sub-contractors as well as technical information requests
• Keep Lead Engineer or Engineering Manager informed of discipline engineering progress, deviations, and execution concerns
• Participate in discipline engineering reviews at Contractor's and subcontractor's locations
• Drives and promotes capital efficiency in engineering design
• Support internal engineering general interest or Global Practice initiatives as requested by Supervisor

Requirements:

• Bachelor’s degree in Mechanical Engineering or related engineering specialty, or equivalent professional experience
• Broad knowledge of discipline design standards, specifications, codes, and appropriate safety criteria
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs

Lim Pey Chyi (Apple) - [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

Part-Time opportunity for 11 months Contract with a Statutory Board

Working Arrangement: 3 days / week

Salary: $19 to $27 / hour

Job Responsibilities:

You will be part of the Architecture and Urban Design Group, and your duties include:

1. Research, artwork and layouts for Urban Design Guidebook series
2. Planning and coordination for Urban Design Festival
3. Public engagement support for Identity Corridors (developing drawings, engagement documentation, etc)
4. Support for public space projects in 2024-2025, e.g. stakeholder engagement, coordination, etc
5. Any other duties assigned by supervisor.

Looking for:

• Singaporeans only
• Min. Degree in Architecture / Planning or equivalent field of study
• Interest to work with stakeholders and be part of public engagement
• Proficiency with 3D modelling, using rhino, sketchup
• Proficiency with graphic design software, e.g. Adobe Photoshop, Indesign, Illustrator

Interested candidate may apply via email to [email protected]. All job applications will be processed with strict confidence and only shortlisted candidate will be contacted.

Chloe Chew (R1768631)

ScienTec Consulting (ScienTec Personnel) - 11C5781

Requirements:

- Support the marketing team in strategic, tactical creative plans to drive sales for our business and ensure brand growth through various marketing activities.

- End to end execution and management of marketing campaigns - from content generation to copywriting to compaigns tracking and reporting .

- Strategize, plan, create and deliver quality, engaging social media and digital content for company blog site

- Handle artwork and design

- Contribute ideas, design new artwork and have the expertise to work with a wide range of digital graphi tools to produce high-quality visual communications.

**Salary range by per class**

**Job Responsibility**

- Guide children's learning through hands-on activities

- Facilitate class as per curriculum and lesson plan provided

- Some preparation of materials before class needed

**Requirements**

- Singaporean / Singapore PR

- Passionate and self-motivated to nurture young minds

- Able to communicate and relate with preschool/ young children

- At least attained Diploma in any discipline

- At least 1-year of experience in teaching preschools or young children will be a plus

- Willing to travel island wide as lessons will be conducted in preschools/ locations assigned

- Applicants must be able to commit at least 3 afternoons (Monday – Friday) for 6 months or more.

Good if you could work on some mornings and evenings.

- Necessary training will be provided once selected.

- Must commit at least 6-8 months and above

Key Responsibilities:

1. Design Direction and Presentation:

a. Provide design guidance, creative direction, and innovative proposal to meet client requirements.

b. Present and effectively communicate design intent during client pitches and project discussions.

2. Client Management:

a. Efficiently handle multiple projects concurrently, overseeing them from start to finish, including sales, design, and execution phases.

b. Ensure that projects are completed on time and meet client expectations.

3. Design Implementation:

a. Conceptual design for pitching projects, including mood board, rendering.

b. Translate design concepts into detailed plans, ensuring that aesthetic intent aligns with technical feasibility.

c. Collaborate with design principal, and clients, qualified Persons and vendors to refine and finalize design details.

d. Collaborate with MEP engineers to ensure the seamless integration of mechanical, electrical, and plumbing systems within the interior design.

e. Produce comprehensive construction drawings, including floor plans, elevations, sections, and details, with a focus on precision and clarity.

4. Building Management Submissions:

a. Prepare and submit drawing package required for approvals from building management.

b. Coordinate with QP for submission to relevant authorities.

c. Manage the submission process, tracking progress, and ensuring timely approvals.

5. Project Design Coordination:

a. Coordinate with project teams to integrate architectural, structural, MEP, and interior design elements seamlessly.

b. Coordinate with procurement team to select feasible materials for design implementation.

c. Collaborate with Project Leaders from project initiation to completion, offering design expertise and insights.

d. Attend adhoc meetings related to design and project matters, including client meetings, project meetings, and site visits.

e. Monitor the implementation of design intent on-site and provide guidance or recommend design changes as necessary.

6. As-Built Submissions:

a. Ensure that all design changes and solutions are seamlessly integrated into project documentation.

b. Oversee the creation of accurate as-built drawings, reflecting the final state of the project post-construction.

c. Ensure that as-built submissions are complete and comply with relevant industry standards.

Requirements:

1. A recognized Degree/Diploma in Interior Design or an equivalent qualification.

2. Proficiency in a range of design-related software, including Hand Sketch, Sketchup, AutoCAD, and similar tools.

3. A minimum of 5 years of relevant experience in commercial design, showcasing strong technical knowledge in areas such as shop drawings, site surveys, and detail drawings.

4. Proven experience in managing projects from start to finish, encompassing sales, design, and execution.

5. Exceptional flair for creative design and a meticulous eye for design details.

6. Highly proactive with outstanding coordination and execution skills.

7. A collaborative team player with excellent communication abilities.

8. Demonstrated ability to meet and exceed expectations while adhering to tight deadlines.

9. Willing to travel overseas

Responsibilities:

• Create and propose designs concepts, space layouts planning, and sales quotations
• Communicate effectively with client in order to understand the client’s objectives and needs
• Coordinate and work closely with suppliers and subcontractors to ensure quality work is produced
• Prepare presentations (2D, 3D) for clients
• Propose quotation for clients based on proposed design and layout
• Responsible for the supervision of work progress to ensure project is followed and completed within the timeline

Requirements:

• Preferred Diploma cetificate holder
• Min 3 years and above of relevant working experience
• Knowledge on Autocad & Sketchup & Vray & 3D Max
• Experience in drawing 2D and 3D in residential, commercial and office projects is an advantage
• Basic arithmetic, exceptional communication and interpersonal relationship skills
• Able to work independently

Shortlisted candidates will be notified.

Thank you for your application.