Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Design in Singapore. The position will be based in our Univac Site in Woodlands.

As an Engineer, Design, you will:

Responsible for product analyzing, design for manufacturing (DFM), tool design 3D and 2D drafting, tool review and debugging.

The key responsibilities are as below:

• Construct mold design layout and conduct mold design review meeting.
• Design precision plastic injection molds in accordance with the requirements.
• Mold management and liaise closely with internal and external customers on matters relating to mold design.
• Preparation of detail bill of material and maintain thorough documentation of hardcopy and softcopy.
• Participate in the First-Off Tool review and assess the suitability of the tool for production.
• Performs other duties as assigned.

What skills and experiences are we looking for?

• Possesses at least a Diploma in Mechanical, Manufacturing, Precision Engineering, and/or any equivalent engineering discipline.
• 2 years of working experience in tool design, and/or any relevant experience.
• Experience in making LSR mold design, as well as packaging mold design is an advantage.
• Proficient in AutoCAD, Unigraphics and Microsoft Office Applications.
• Familiar with engineering drawings and GD&T.
• Ability to develop complex designs to the point of manufacture and release to production.
• Knowledge of plastics & elastomers.
• Team player with a good verbal and written skills.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Manage assigned projects to ensure quality and on-time execution to the project’s specifications and client’s expectations.
• Manage sub-contractors and suppliers to ensure quality and on-time delivery within project costs.
• Prepare project schedule/timeline and manage deadlines for the delivery of projects on time.
• Conduct project meetings as and when required, eg. for issues resolution and updates.
• Facilitate change requests to ensure that all parties are informed and manage any impact on schedule and budget.
• Managing client’s expectations during the project transition period.
• Oversee onsite setup work to check on quality delivery, safe work procedures and on-time completion, when required.
• Apply Permit To Work with supporting WSH documentation (Risk Assessment, Methods Statement, Safe Work Procedures) and any project-related admin work when required.
• Source for sub-contractors, suppliers and production material, when required.

Job Requirements:

• With 2 - 4 of working experience in managing interior fit out project in commercial office design & build
• Excellent communication skills
• Dynamic and comfortable working in a fast-paced environment.
• Comfortable in running a few projects in parallel (depending on the size of projects).

Job Description:

• Responsible for product design and user experience optimization for the AI accounting assistant, defining core functionalities and user workflows to ensure ease of use.
• Design basic UI prototypes and participate in user testing and feedback collection, driving continuous product improvement.
• Work closely with AI and backend engineers to coordinate project development progress, ensuring timely product launch.

Requirements:

• Bachelor’s degree or higher, with a preference for majors in computer science, design, product management, or related fields.
• At least 2 years of experience in product management or UI/UX design; experience in mobile product development is preferred.
• Familiar with writing product requirement documents (PRDs) and basic prototyping skills (such as Figma, Sketch).
• Strong user needs insight, able to quickly identify user needs and translate them into product features.
• Excellent communication and coordination skills; experience in financial or AI products is a plus.

Responsibilities:

• Work closely with customer and internal team during new product introduction to deliver design project
• Coordinate with factory to ensure timely delivery of prototypes during sample builds
• Facilitate DFM activities during development to ensure product is manufacturable
• BOM creation and Maintenance in SAP system (Part addition, BOM Upload, BOM Change)
• Handover of project to factory for mass production

Requirements:

• At least 3 years of working experience in electronics manufacturing environment
• At least a Bachelor’s degree in Engineering
• Good understanding of electronics manufacturing process
• Experience in project / product management
• Fluent in verbal and written communication

Interested candidates are to submit a detailed resume to speed up the application process.

Only shortlisted candidates will be notified. Thank you for applying.

• Proficient in using electrical and manual equipment and measurement tools
• Translate drawings over to workable and buildable projects
• Cut, shape timber according to measurements/requirements
• Installation of wooden fixtures such as cabinets or shelving unit
• Maintenance of differing wooden fixtures or repairs

Responsibilities:

• Review and maintain Safety Management System, Safe Work Procedures, and Risk Assessments.
• Identify improvement areas and monitor implementation of recommended measures through site inspections and team engagement.
• Collaborate with teams to plan, implement, and maintain effective WSHE work plans.
• Investigate WSH infringements and industrial accidents, recommending preventive actions.
• Handle incident reporting, investigations, and propose corrective measures.
• Conduct internal audits to ensure compliance with ISO 9001, ISO 14001, ISO 45001 standards, GGB, ConSASS, and Bizsafe.
• Liaise with relevant authorities on WSH issues.

Requirements:

• Registered WSHO & ECO Officer
• At least 5 working experience in construction industry (design & build/industrial warehouse)
• Working experience with A1 or A2 construction company.

___________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• 5 day work week

• Responsible for assembling and building prototypes

• Medical & Dental insurance & Quarterly Bonus.

 JOB DESCRIPTION

SIGMADESIGN is a fun, fast-paced engineering consulting company currently experiencing explosive growth. We are looking for an Assembly Technician. Curiosity, competency and confidence are a must.

Primary Function :

Responsible for assembling and building prototypes and products utilizing various tools in support of SIGMADESIGN’s engineering production and manufacturing activities. Occasionally provides support in the form of documentation and troubleshooting until units/parts are completed to acceptable test procedures and routing operations.

Essential Job Functions – Responsibilities :

• Performs processes to complete mechanical and electrical assemblies, subassemblies, electrical wiring, and wire harness assembly using common hand tools and electronic lab tooling.
• Tests functional performance of assembly and observes and records results.
• Assembles products according to routings and blueprints; measures parts to specified tolerances.
• Uses hand tools, chemicals and adhesives as needed.
• Maintains and monitors test equipment as necessary to ensure continued accuracy.
• Keeps production supervisors advised of work status, workload, problems and progress as related to work assignments.
• Demonstrate Technical Capacity, Learning Orientation, Time Management, and Thoroughness Skills.
• Maintain a clean and safe work environment including tools and assembly production areas.

Education and Experience: (Knowledge, Skills, & Abilities)

• Minimum NITEC in any Engineering discipline
• Minimum one year of recent direct or related experience required.
• Basic computer literacy skills, basic file structure understanding, and web navigation; working knowledge of Microsoft Office productivity tools including Outlook, Excel, and Word.
• Experience and ability reading and creating simple schematics; able to strictly follow engineering directions or procedures as required.
• Ability to multitask (make progress on multiple unrelated projects) and prioritize workload.
• Detail oriented with a focus on quality, execution and follow through.
• Hands-on skills and mechanical aptitude skills required.
• Excellent written and verbal communications skills.
• Strong basic math skills.
• Experience or familiarity with multimeters, oscilloscopes, and other typical electronic lab equipment a plus.

Work Environment:

Standard lab/production environment. Air-conditioned facility. Occasionally may be required to work in environmental conditions that emulate typical user environments in order to facilitate design testing and validation.

Compensation/Benefits:

• Salary will commensurate according to experience
• Profit Sharing
• Medical & Dental Insurance
• Paid Annual Leave

Click Apply Now for an interview!

Responsibilities:

• Review and maintain Safety Management System, Safe Work Procedures, and Risk Assessments.
• Identify improvement areas and monitor implementation of recommended measures through site inspections and team engagement.
• Collaborate with teams to plan, implement, and maintain effective WSHE work plans.
• Investigate WSH infringements and industrial accidents, recommending preventive actions.
• Handle incident reporting, investigations, and propose corrective measures.
• Conduct internal audits to ensure compliance with ISO 9001, ISO 14001, ISO 45001 standards, GGB, ConSASS, and Bizsafe.
• Liaise with relevant authorities on WSH issues.

Requirements:

• Registered WSHO & ECO Officer
• At least 5 working experience in construction industry (design & build/industrial warehouse)
• Working experience with A1 or A2 construction company.

___________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Position Responsibilities

Elementary School Educator Responsibilities

• Foster a sense of student belonging by cultivating joy and purpose throughout the Elementary School.
• Cultivate a caring and culturally responsive learning community in the classroom, taking into account the physical, emotional, and intellectual well-being of students.
• Utilize the principles of Responsive Classroom to build a community where students feel valued, respected, and motivated to succeed.
• Identify essential learning and use a planning framework with standards, learning targets, real-world issues, and a culturally responsive curriculum.
• Design and implement engaging learning experiences that are collaborative, culturally responsive, and differentiated.
• Employ high-impact instructional practices based on current pedagogical approaches to teach the curriculum.
• Design and deliver engaging, differentiated lessons that align with curriculum standards and meet the academic and social-emotional needs of all students.
• Regularly assess student progress through formative assessments and other data-driven tools.
• Accurately and regularly assess student progress through formative and summative standards-based approaches.
• Continuously monitor student learning and make appropriate modifications of goals and strategies to meet students’ needs.
• Group students flexibly based on their individual needs, abilities, and assets, using data to inform grouping decisions.
• Design quality formative, summative, and self-guided assessments that provide students with frequent feedback and communicate their growth and achievement.
• Integrate technology in innovative ways in daily instruction to enhance learning.
• Respond to learners’ diverse needs using responsive, measurable, and research-informed interventions and extensions.
• Demonstrate experience with current best pedagogical practices, teaching materials, and instructional strategies.
• Engage with students in meaningful activities beyond the classroom that extend student learning experiences (coaching, organizing field trips, sponsorship of clubs, events, overseas travel and/or community service projects, etc.).
• Work closely with team members, PLC teams, and school administration to develop cohesive curriculum materials and establish common instructional goals and assessments.
• Engage in team planning, curriculum review, budgeting, and other school-required activities as needed.
• Collaborate as a member of a Professional Learning Communities (PLCs) that creates a supportive community, plans curriculum, gives and receives feedback with one another, and engages in professional learning and reflection.
• Actively engage in professional learning and growth through regular observation and feedback cycles with Professional Learning Community Coaches and Principals.
• Experience with or interest in co-teaching in a flexible learning environment.
• Engage in co-teaching practices with other members of the PLC and utilize learning community spaces with intention and flexibility.
• Demonstrate an understanding of interdisciplinary teaching and learning.
• Strive for continuous self-improvement as a lifelong learner.
• Model the Core Values in your interactions with all members of the school community.
• Cooperate with and participate in the planning and evaluation of the school program as needed.
• Engage with students in meaningful activities beyond the classroom that extend student learning experiences (coaching, organizing field trips, sponsorship of clubs, events, overseas travel and/or community service projects, etc.).
• Connect with and be available to parents and students during and outside of school hours (in person and via email communication)

Position Requirements & Qualifications

• Bachelor’s Degree in relevant field
• Master’s Degree in relevant field preferred
• Understanding of child development and experience addressing social-emotional needs.
• Experience working with diverse learners, including learners of English as an Additional Language (EAL).
• Knowledge of child development and social-emotional learning strategies.
• Excellent verbal and written English language skills

Role Specific Requirements:

• Experience teaching art to all grade levels (K-5): Develop age-appropriate art lessons that stimulate creativity and imagination in students from various age groups.
• Knowledge and understanding of National Core Art Standards (NCAS), effective instructional strategies, and assessment driven instruction related to elementary art teaching and learning.
• Expertise in multiple mediums: Teach using a variety of materials, including painting, sketching, sculpting, digital media, and more, encouraging students to explore different forms of artistic expression.
• Practicing artist: Actively engaged in own art practice; sharing this with students to inspire and demonstrate the value of artistic exploration and lifelong creativity.
• Collaborate with educators: Work closely with colleagues to integrate art into broader curriculum goals and support students’ overall learning experiences.

Working Requirements

• Sponsoring and/or coaching after school activities are part of the responsibility of the professional educator. Therefore, faculty shall be available to coach and/or sponsor an athletic team or other extra curricular activity. Each faculty member is expected to do a minimum of one category 1 activity or sport per year.
• Mandatory attendance of school orientation, chaperone and participate in a minimum of four evening and/or weekend school activities each year, as assigned (including "Back-to-School Night").
• Attend Responsive Classroom professional learning (virtual), specified by the school, in the months prior to the official start of employment.

Job Responsibilities

• Collaborate with architects on SoC (System on Chip) architecture discussions and optimizations, focusing on integration and system block development, including areas such as power management, clock/reset, system registers, test control, and PinMux.
• Work with architects and APR (Automated Place and Route) teams on SoC floorplanning, power checks, and timing constraint reviews.
• Provide support for SoC DFT (Design for Testability) and participate in SoC verification planning and verification support.

Job Requirements:

• Bachelor’s or Master’s degree in Electronic Engineering with experience in ASIC design.
• Proficiency in ASIC design flow, including RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure, and verification.
• Solid understanding of DFT principles and practices.
• Experience in a UNIX/Linux environment with scripting skills.

Interested candidates kindly click the APPLY NOW button.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Xie Jiani (R1548854)

EnviroDynamics Solutions Pte Ltd

EA License No.: 12C6285

Job responsibilities:

• Strategise with business line leaders for key client opportunities and revenue opportunities for the Singapore business
• Drive strategic and business development meetings
• To hit sales target and secure new projects
• To work closely with Interior Designers and Architects.
• Work closely with dealers to close the orders.
• Develop new business, new market development of an assigned business division in Singapore
• Attend preliminary sales and site meetings-to obtain drawings and design brief from the client

Requirements:

• Min 3 years of sales experience in interior fit-out/retail fit-out.
• Have good contacts with Interior Designers, Architects, and Main Contractors, Direct client & etc.
• Prefer relevant experience in commercial Projects
• Strong Personality Trait, fast proactive, ambitious, strong initiatives.

• Join project kick-off meeting with the client
• Attend the tender meeting if required
• Study & understand design received from the client
• Work with the project team to get site measurements
• Prepare technical drawings of brand fixtures and overall store
• Prepare elevations and 3Ds
• Work closely with brands to finalize all drawings
• Design education background
• Able to draw on Autocad or Sketchup or AI
• Ability to use 3D software
• Ability to multi-task and manage numerous projects simultaneously

Requirements

• Minimum of Diploma in Interior Design
• 2 years experience in the interior design field
• Local preferred

Manage assigned projects to ensure quality and on-time execution to the project’s specifications and client’s expectations.

• Coordinate the production workflow between the Sales, Design, Production departments including any external sub-contractors and suppliers.

• Manage sub-contractors and suppliers to ensure quality and on-time delivery within project costs.

• Utilise company’s project management software to coordinate and communicate with project team members during the production process.

• Initiate Production Schedule and manage deadlines for the delivery of projects on time.

• Conduct project meetings as and when required, eg. for issues resolution and updates.

• Facilitate change requests to ensure that all parties are informed and manage any impact on schedule and budget.

• Managing client’s expectations during the project transition period.

• Prepare an Onsite Schedule for the coordination of load-in, setup and dismantling works and share it with relevant parties.

• Oversee onsite setup work to check on quality delivery, safe work procedures and on-time completion, when required

• Apply Permit To Work with supporting WSH documentation (Risk Assessment, Methods Statement, Safe Work Procedures) and any project-related admin work when required.

• Source for sub-contractors, suppliers and production material, when required

Job scope:

-Propose ideas on interior designs and space planning

-Produce interior design drawings, 3D drawings & quotations

-Work closely with client, contractors & suppliers to ensure quality project completion & timeline set are met

-Involve in site measurement, layout plan & selection of materials

-Other tasks as assigned by company's director

Requirements:

-Specialised in interior design or equivalent

-Able to communicate & write in both English & Mandarin in order to communicate with our mandarin speaking contractors & clients

-Knowledge in Autocad, sketchup, 3D max, Vray, photoshop, excel

-Responsible, committed and have a good working attitude

-Able to work independently and be a team player at the same time

-Able to start work at short notice

-Individuals with or without experience are welcome to apply, training will be provided

Job Responsibilities

i. Design and Development

• Design material handling systems and components for wafer probers, including wafer loading, unloading, transport, and alignment mechanisms.
• Develop detailed engineering drawings,specifications, and 3D models using CAD software.
• Conduct feasibility studies and simulations to validate design concepts and performance.

ii. Prototyping and Testing

• Build and test prototypes to evaluate the performance and reliability of designs.
• Conduct experiments and tests to ensure that material handling systems meet performance criteria and industry standards.
• Analyze test results and make necessary design adjustments to improve functionality and efficiency.

iii. Collaboration and Communication

• Work closely with cross-functional teams, including mechanical, electrical, and software engineers, to integrate material handling systems with wafer probers.
• Communicate design concepts, progress, and issues to stakeholders and team members.
• Collaborate with manufacturing teams to ensure designs are feasible and optimized for production.

iv. Innovation and Improvement

• Stay updated with the latest advancements in material handling technology and semiconductor industry trends.
• Identify opportunities for innovation and continuous improvement in material handling solutions.
• Implement feedback from field tests and customer use to refine and enhance designs.

v. Project Management

• Manage design projects from concept to completion, ensuring timelines and quality standards are met.
• Prepare and maintain project documentation, including design reports, test plans, and technical manuals.
• Coordinate with project managers and other engineers to align with project goals and deadlines.

vi. Compliance and Safety

• Ensure all designs comply with industry standards, safety regulations, and company policies.
• Conduct risk assessments and implement safety measures in design and testing processes.
• Document and address any potential hazards associated with material handling systems.

Required Skills and Qualifications

i. Technical Skills

• Proficiency in CAD software (e.g., SolidWorks, AutoCAD) for designing mechanical components.
• Strong understanding of material handling principles and technologies.
• Knowledge of mechanical systems, robotics, and automation in the semiconductor industry.

ii. Analytical and Problem-Solving Skills

• Strong analytical skills to assess system performance and identify areas for improvement.
• Ability to troubleshoot and resolve complex design issues.
• Excellent problem-solving skills and attention to detail.

iii. Education and Experience

• Bachelor’s or Master’s degree in Mechanical Engineering, Mechatronics, or a related field.
• Relevant experience in designing material handling systems, preferably in the semiconductor industry.
• Experience with wafer probers or semiconductor testing equipment is advantageous.

iv. Soft Skills

• Excellent communication and teamwork skills.
• Ability to work independently and manage multiple projects simultaneously.
• Strong organizational skills and a commitment to producing high-quality work.

Additional Responsibilities

· Supplier and Vendor Management

• Work with suppliers and vendors to source high-quality components for material handling systems.
• Evaluate and select suppliers based on quality, cost, and reliability.
• Manage relationships with suppliers to ensure timely delivery of components and materials.

· Training and Support

• Provide technical support and training to manufacturing and maintenance teams on material handling systems.
• Develop and maintain training materials and technical documentation for end-users.
• Assist in the resolution of customer issues related to material handling systems.

· Sustainability and Efficiency

• Promote sustainable practices and environmental responsibility in design activities.
• Identify and implement measures to improve efficiency and reduce waste in material handling processes.
• Conduct regular reviews and audits to ensure compliance with sustainability goals.

- Makes any necessary changes to existing models or drawings

- design drawings using CAD

- Provide technical support to various personnel as needed

- Work closely with engineers to ensure drawings and models meet design requirements and specifications

- Ability to operate computer-aided design (CAD) software and manual drafting workstation

- Ability to multitask and manage several projects at a time

Job Responsibilities

1. System Design and Development

• Design motion control systems, including hardware and software components.
• Develop and test control algorithms for precision motion systems.
• Create detailed design specifications and documentation.

2. Component Selection and Integration

• Select appropriate sensors, actuators, motors, and controllers for the motion control system.
• Integrate components to ensure seamless operation and optimal performance.
• Work with suppliers and vendors to source high-quality components.

3. Simulation and Testing

• Conduct simulations to predict system behavior and validate design choices.
• Develop and implement testing protocols to evaluate system performance.
• Troubleshoot and resolve issues identified during testing.

4. Collaboration and Communication

• Work closely with cross-functional teams, including mechanical, electrical, and software engineers.
• Communicate design concepts and progress to stakeholders.
• Collaborate with manufacturing teams to ensure designs are feasible and cost-effective.

5. Optimization and Improvement

• Continuously improve motion control systems for better efficiency, accuracy, and reliability.
• Stay updated with the latest advancements in motion control technology.
• Implement feedback from field tests and customer use to refine system designs.

6. Project Management

• Manage project timelines, budgets, and resources.
• Ensure projects meet deadlines and quality standards.
• Coordinate with project managers and other engineers to align with project goals.

Required Skills and Qualifications

1. Technical Skills

• Proficiency in motion control technologies and principles.
• Experience with CAD software for designing mechanical and electrical components.
• Knowledge of programming languages (e.g., C/C++, MATLAB, Python) for developing control algorithms.
• Familiarity with PLCs (Programmable Logic Controllers) and HMI (Human-Machine Interface) systems.

2. Analytical and Problem-Solving Skills

• Strong analytical skills to assess system performance and identify areas for improvement.
• Ability to troubleshoot complex motion control issues.

3. Education and Experience

• Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Robotics, or a related field.
• Relevant experience in designing and implementing motion control systems.

4. Soft Skills

• Excellent communication and teamwork skills.
• Strong organizational and project management abilities.
• Attention to detail and a commitment to producing high-quality work.

Additional Responsibilities

• Compliance and Safety

• Ensure all designs comply with industry standards and safety regulations.
• Conduct risk assessments and implement safety measures in system designs.

• Innovation and Research

• Engage in research and development to explore new motion control technologies.
• Innovate and propose new solutions to enhance system performance and capabilities.

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

Job Descriptions:

• Handle interior design & renovation inquiries.
• Discuss and propose professional advice on interior design, space planning, design conceptualization, and material selection to prospective clients.
• Prepare proposal and quotation based on client requirements and design.
• Manage and coordinate project progress from inception to completion.
• Site supervision and project coordination.
• Work closely with subcontractors and suppliers to ensure the project works smoothly.
• Schedule workflow to meet customer move-in date.

Requirements:

• At least one (1) year of working experience in Interior Design or Sales.
• Graduates in interior design or related fields are welcome.
• Have a passion for design and creativity in Interior Design.
• Independent with sales and target-driven mindset.
• Positive attitude and takes pride in your work.
• Responsible & Reliable.
• Customer-oriented with excellent communication skills.

Job Highlights:

• Training Provided.
• Option for Full Commission-based or Basic + Commission for the first 6 months only.
• Income with no ceiling cap.
• Incentive Rewards for a high performer.
• Quality sales lead provided.
• Strong In-House Team to support, including Marketing, Drafter, Accounts, HR, and admin.
• Company incentive trips.
• Friendly and supportive working environment.

Working Location:

• West Showroom (Tradehub 21)
• Central Showroom (Balestier)
• East Showroom (AZ@Paya Lebar)

If you do not possess the above but think you want to give Interior Design a shot, do hit us up.

We would love to have a chat!

Tasks & Responsibilities

• Prepare electrical calculations, cost estimates, and technical curves for tender submissions.
• Analyze design requirements and ensure compliance with relevant standards.
• Collaborate with clients to gather requirements and provide technical support and specifications throughout the tender lifecycle.
• Work with suppliers and contractors to obtain quotes for special accessories and equipment.
• Prepares electrical design and winding Bill of Materials (BOM) for transformers manufacturing, including schematics and layout drawings.
• Conduct feasibility studies and simulations to optimize design performance.
• Support ac-hoc work such as site surveys, technical meetings and approval drawing preparation etc.

----------------------------------

Qualifications & Experience

• Bachelor’s degree in Electrical and Electronic Engineering or an equivalent qualification, preferably with a major in electrical power engineering.
• Proficiency in programming languages such as C, C++, etc., is a plus.
• Knowledge of computer-aided design (CAD) software, including AutoCAD 2D/3D.
• Familiarity with transformer industry standards, such as IEC and IEEE.
• Excellent team player with an open mindset and a collaborative spirit.
• Demonstrates flexibility and adaptability to meet project timelines.
• Ability to work independently with minimal supervision.

Fresher is a leading lifestyle food group that specializes in bringing boutique style services to the masses.

Established in 2019, the Fresher group has amassed strong traction within each of its brand's market and high client stickiness across our 3 brands: Fresher Performance Meals, Fresher Dinners, Fresher Catering & Events.

We are expanding our team and are looking for ambitious, bold individuals with an eye for detail to join us. As our resident Social Media and Design Executive, you’ll be partaking in the launch of our 3rd brand and seeing it from concept to launch. In addition, you’ll be thoroughly involved in this year’s Christmas catering - a highly anticipated, but thrilling and rewarding season.

- Option to extend beyond 3-month contract

Job Description

• Generate content across socials in line with brand goals
• Manage the company’s socials (tiktok and instagram)
• Conduct and edit videos and photography based on the content calendar
• Design and edit marketing materials (social media posts, images, mailers etc.)
• Update the website with edited images and menu accordingly

Requirements

• A good eye for design
• Video editing software (Capcut / DaVinci etc.)
• Photo editing software (Adobe Creative Suite, Photoshop / Illustrator / Canva)
• Knowledge of food is good to have
• An attitude of learning new things, and ability to multitask and time manage
• A creative eye for the social world
• Openness to work during weekends for shoot, during the high key season prior to launch day

Benefits:

• Food provided

Schedule:

• Monday to Friday

Work Location: In person

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628