The Senior Design Engineer is responsible for assisting the Senior/Technical Manager on structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis.
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications, and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers, and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required.
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the workplace.

Skills & Requirements

• Education: Minimum Degree in Civil Engineering from accredited Universities
• Experience: Prior 6 to 8 years of experience in design and construction
• At least 5 years of civil MRT station experience (have completed at least 1 MRT station project)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.
• Well versed in Autocad and BIM software is preferred.
• Technical Competencies: Technical expertise and knowledge in Foundation, Structural and Civil works (MRT Stations).

Responsibilities:

• Collaborating with clients, architects, engineers, government agencies and stakeholders to create functional and aesthetic design results as per conceptual design.
• Incorporating technical specifications and safety standards into design plans and details.
• Review, coordinate and liaise with Consultants and Subcontractors to define the Architectural construction details and interface to Structure and M&E services.
• Reviewing and modifying designs based on feedback from clients, AE, government agencies and stakeholders.
• Work out schedule for shop drawing preparation/approval and material approval/procurement based on master programme and monitor the status.
• Supervise BIM modelers to produce shop drawings.
• Liaise with BIM team on drawings production to identify clashes with other trades
• • Ensure compliance to construction drawings, project specifications, client's needs and authorities' code and standards.
• Verify site installation according to approved shop drawings and finalize as built drawings.
• Review project specifications, technical clarification and construction drawings, identify technical issues and seek technical clarification.

Requirements:

• Diploma or a Bachelor’s Degree in Building or Architecture
• Minimum 5 years of relevant experience in building projects
• Knowledgeable in Singapore Building Codes and Regulations for Code on Accessibility in the Built Environment, Approved document/Acceptable solution and Green mark issued by BCA

SOG design is a leading architectural and interior design firm dedicated to designing cutting-edge structures that inspire and transform spaces. We are seeking talented and passionate Senior Interior Designer to join our innovative team in Singapore.

An opportunity to work on high-profile large-scale interior and architecture projects.

We welcome all experienced interior designers to apply.

Job Description

• Conceptualize and developed high quality design that aligns with client’s objectives.
• Demonstrates a strong understanding of the design process and project brief, coordinating the preparation of the project deliverables and other activities related to the project development.
• Excellent time management, communication, collaboration, and the ability to manage multiple projects and deadlines.
• Able to attend client meetings independently.
• Able to delegate and mentor junior members of the team as appropriate.
• Support senior colleagues with client presentation, making a positive contribution towards project meetings and client engagements.
• Participate in internal and external consultant meetings, conduct site visits and assessments to evaluate existing conditions and ensure that design concepts are implemented according to specifications and quality standards.

Job Requirements

• Bachelor/Master’s degree from a accredited interior design or architecture school.
• Fluent in spoken and written English
• 5 years of interior design experience in various sectors - exposure in mid to large scale interior and architecture projects will be highly desirable.
• Proficient in Sketchup, AUTOCAD is preferred. Adobe Indesign, Enscape, Rhino & Revit will be highly advantageous.
• Versatile and independent in all phases of the design process, such as concept design, space planning and technical documentation, from concept development to project completion.
• Staying abreast of market and industry trends

Responsibilities:

· Performs space planning and visualizes in 3D perspective;

· Sources for materials and gathers cost estimates from suppliers for budgeting;

· Prepares design proposal with materials, concept images and colour selections;

· Assists in conveying design concept to clients in formal presentations;

· Produces tender drawings, working drawings and interior finishes specifications;

· Liaises and discuss design/construction issues with clients and specialists;

· Involvement in tender exercise process, evaluate tender submission and report on recommendation;

· Review and approval of shop drawings and material submitted by contractor;

· Gather updates on progress on-site and resolves issues with contractors and specialists.

Requirements:

· Degree in Interior Design or equivalent;

· 0 - 3 years of experience in interior projects or similar industries;

· Strong in design detailing and good knowledge of materials and technical requirements;

· Good computer literacy and well-versed in necessary design related software.

The Singapore University of Technology and Design (SUTD) is offering position for research assistant who will work closely with Dr. Meixia Lin working on various projects about Numerical Optimization, Convex and Non-Convex Optimization, Optimal Transport, Machine Learning, and others.

Priority will be given to those who have some computational experience.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Job Requirements

Professional Qualifications:

• Bachelor's degree from an accredited institution or equivalent qualifications and experience.
• At least 5 years of post-semiconductor process or design experience.

Specialized Knowledge & Skills:

• Knowledge of semiconductors and customer needs.
• Experience with CAD/CAM systems, including creating specifications and drawings.
• Familiarity with measurement, analysis, and reliability assessment tools.
• Basic understanding of the substrate manufacturing process (desirable).
• Ability to solve problems ranging from difficult to moderately complex.

Competencies:

• Demonstrated ability to work with meticulous care and precision.
• aptitude for understanding and interpreting customer needs.
• Proven project management skills for effective planning and execution.
• Capacity to influence and guide others on company policies, practices, and processes.

Trial production and design

Manage customer data by sending, receiving, editing, and organizing it effectively.
Implement Design Rule Checks (DRC) and handle system registration.
Apply Design for Manufacturing (DFM) principles and respond to customer feedback.
Create and optimize product drawings, and secure customer approval.
Develop, update, and oversee design and manufacturing data.
Generate and manage tool data.
Produce data for process checks.
Establish product specifications, set up process flows, and register systems.
Summarize the settings for manufacturing conditions.
Review prototype development results in collaboration with relevant divisions.
Summarize the outcomes of quality confirmations.
Manage the transition of prototype production.

Collaborate cross-functionally with other teams.

Standardization, OperationDevelop, standardize, and validate input and design guidelines.
Establish and standardize operational flow rules.
Formulate and standardize correction rules and policies.
Oversee the training and development of design engineers.

Roadmap

Research customer and industry technology trends.
Develop a technology roadmap.
Summarize and manage development initiatives through research and innovation.

Customer Response

Serve as the primary point of contact for technical inquiries from customers.
Conduct regular meetings with customers to discuss and address their needs.

Best Regards

Navneet Goel

[email protected]

EA License No. : 02C3423 | Reg No. R1982194

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team, ISP Design leaders in other sites, and Digital System Design Team
• Leading, supervising and mentoring a team of RTL design engineers

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 7+ years of Digital Design and verification related experience
• 3+ years project management / people management experience / skill
• Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Ability to lead teams and collaborate effectively with people in different functions
• Strong time management skills to ensure timely completion of deliverables
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

Job Responsibility

-Full-time and passion in teaching children/adults on art principles and technique

-Conduct and facilitate teaching and guidance in individual or group settings

-Leading and teaching studio classes, school programmes with outdoor workshops and events

-Create positive and cheerful classroom environment that is conducive for learning

-Effectively guide the student and tracking progress and providing timely feedback.

Job Requirement

- English and Mandarins spoken. Bilingual abilities are a plus. (To communicate with Mandarin-speaking parents)

- Able to work on weekends with off days on weekday.

-Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in Art professional

-Min 1-2 years in teaching experience

-Good at writing Chinese calligraphy is a plus

Job Highlights
-Competitive Salary & Allowance Benefit
-Promotion Opportunities & Career Development
-5 days work per week

We are seeking experienced Java Developers to join our client team in developing robust, scalable applications. Your primary focus will be backend development, working with Java Core, RESTful services, and relational databases.

• Working Hours: Mon-Fri
• Working Location: Central (currently hybrid working arrangement)
• Salary Package: Up to $7,200 (basic) + AWS + attractive bonus (commensurate with experiences)

Responsibilities:

• Develop and maintain Java-based applications and services.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Write clean, efficient, and testable code.
• Troubleshoot, debug, and upgrade existing software.
• Participate in code reviews and optimize performance.
• Ensure high levels of security, performance, and scalability.

Requirements:

• Proven experience as a Java Developer (3+ years).
• Strong knowledge of Java, Spring Framework, and Hibernate.
• Experience with RESTful services and microservices architecture.
• Familiarity with relational databases (e.g., MySQL, PostgreSQL).
• Proficiency with Git, Maven, and build tools.
• Strong problem-solving skills and attention to detail.

Preferred Skills:

• Experience with cloud platforms (AWS, Azure).
• Familiarity with CI/CD pipelines.

Why Join Us?

• Competitive salary and benefits package.
• Opportunities for professional growth and development.
• Collaborative and innovative work environment.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Elane Yap Theng Yu- R1989397
ScienTec Consulting Pte Ltd - 11C5781

Job Responsibilities

• Perform sales support role and respond to customer inquiries via email/phone
• Obtain specifications from clients/designers and calculate or measure quantities from floorplan drawing
• Prepare samples and quotations
• Follow up with clients on quotation orders
• Manage invoicing

Job Requirements

• Minimum 1 years experience in interior design
• Experience in wall furnishing (wallpaper, acoustic panels, etc.) is advantageous
• Familiar in construction floorplan drawing
• Location: Ubi

Tan Cheu Hoon, Fenny

EA License No.: 02C3423

Personnel Registration No.: R22105896

[Order ID: 478461]

Responsibilities:

• Design and develop software for automated semi-conductor process equipment.
• Improve equipment performance through CIPs and other development initiatives.
• Support field work to upgrade and resolve customer issues.
• Any other ad-hoc duties assigned.

Requirements:

• 5 years’ experience in a managerial capacity overseeing software development and automation control in Semiconductor industry.
• Experienced in programming on Windows (XP and above) environment.
• Highly versatile in VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.

Please include the following for us to conduct an effective job matching for you:

• Earliest availability date/ notice period
• Expected & Last drawn salary

To Apply, please kindly email your updated resume to [email protected]

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Victoria Loh Jie Li
EA Personnel Reg. No.: R1330197
EA Licence No.: 07C5771

Industry: Heavy Industry/Equipment/Machinery

Location: Tuas

Position: Project Manager (Job ID: 19317)

Working hour: Monday - Friday, 8:00 - 17:00

Our client, the process and construction arm of a major Japanese logistics company.

Job Description:

➤Key responsibilities for this role include being involved in various project stages which include basic engineering design and detailed design, site and technology assessment, technical consultation.
➤Is also tasked to manage the budget, schedules and quality. To oversee the delivery and use of materials, tools, and equipment, and the quality of construction, staff productivity, and safety.
➤The candidate will lead and collaborate with the design and engineering team to deliver on key responsibilities in an assignment under tight deadlines.
➤Engineering projects management through structured planning, ensuring set timelines, budgets and resource allocation for successful execution.
➤Cultivate and maintain strong client relationships, ensuring satisfaction with project deliverables.
➤Act as the primary point of contact with clients in addressing and resolving issues and managing expectations.
➤To lead engineering team and engineers assigned, adhering to quality standards, codes and project requirements.
➤Coordination and engagements with vendors and OEMs to specify technical specifications and data sheets.
➤To ensure that works are carried out according to specifications, drawings without compromising on quality and safety.
➤Provide technical expertise in designs, ensuring adherence to industry standards, codes and regulations.
➤Review and approve design documents, drawings, and specifications.
➤Collaborate with multi-disciplinary design teams to optimize solutions and address technical challenges.
➤Preparation of Technical specifications and Package P&IDs for all the mechanical equipment.
➤Prepare and review/check of the design Interfaces with other disciplines and Packages.
➤Develop and maintain engineering standards, specifications, and best practices for the designs.
➤Review of vendor offers, preparation of technical evaluation report, technical portion of the purchase order.
➤Review and Input drawing/document list for package, design review and validation records, Bill of quantities, Vendor drawing review.
➤Provide technical support and guidance to engineering and project team.
➤Proactive in continuous improvement for engineering processes.

Job Requirements:

➤ Bachelor’s degree in Mechanical Engineering or related field
➤ At least 5 years of experience in the field of plant engineering design and construction experience in petrochemical, chemical and industrial plants. Consistent career experience in the engineering department.
➤ Experience in the design of engineering systems and equipment including boilers, turbines, compressors, pumps, and heat exchangers.
➤ Track record of successfully delivering chemical & industrial projects on time and within budget.
➤ Proficiency in MS Office and engineering software tools such as Smartplant 3D, Caesar II or similar plant engineering tool and AutoCAD.
➤ Strong knowledge of industrial plant design principles, process and operation philosophy
➤ Well-verse with industry standards and best practices for design, maintenance, and reliability.
➤ Excellent problem-solving skills and ability to work effectively in cross-functional teams.
➤ Effective communication and interpersonal skills, with the ability to work collaboratively in a multidisciplinary team environment and with the Clients and Stakeholders.

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Thank you for your understanding and co-operation

Lee Xin Hui

EA Registration No: R22108046

Pasona Singapore Pte Ltd

1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246

EA License No:90C4069

Job Description:

• Utilize Adobe Photoshop to edit and enhance photos, ensuring they meet quality standards for use in our product catalogues and marketing materials.
• Capture high-quality images of products for marketing use, ensuring photos align with brand guidelines and aesthetic standards.
• Conduct preliminary market research focused on industry trends and consumer behaviors. Gather data that will inform design choices and marketing strategies.
• Regularly update and maintain the sample inventory at the local office. Ensure that the inventory is organized and accurately reflects available materials.
• Document, track, and organize sample products efficiently, facilitating easy access for stakeholders.
• Any other related adhoc tasks

Requirement:

• Currently pursuing a diploma/ degree in Business, Marketing, or a related field.
• Strong attention to detail and a meticulous approach to handling data and conducting research.
• Proficient in the use of Adobe Photoshop or a willingness to learn; previous experience is a strong plus.
• An ability to work both independently and as part of a dynamic team.
• Excellent communication and organizational skills.
• A proactive mindset and an eagerness to learn and take on new challenges.

The Design team for Kitchen Spaces is responsible for supporting the creation of food spaces in our Client’s offices that promote collaboration and engage & energize employees throughout each day.

With hundreds of restaurants globally, the team works with a variety of vendors to provide great service, delicious food and innovative food experiences.

As Design Manager - Kitchen Spaces - you’ll work as part of a global design team and support the development process that creates the spaces where employees interact with food. Their back of house (BOH) areas need to support the healthiest & happiest workforce and you will help ensure everything gets done by the right people at the right time to bring these venues to life.

Responsibilities:

• Support the Regional Design Manager - Food Spaces on the design management of kitchen spaces; ensure all team members are engaged in each appropriate project phase; maintain and distribute necessary documentation to keep project phasing on track.
• Liaise with internal and external stakeholders on all things kitchen design, food service equipment, back of house layout & flow, equipment technology, MEP requirements, goods-in strategy, waste strategy, etc; ensure close alignment between the Client’s requirements and the Food Service Consultant’s design strategy and drawing package.
• Assist and/or own global & regional sourcing agreement conversations with equipment suppliers and keep all relevant documents up to date.
• Run drawing review sessions from concept to technical stage, being able to clearly indicate design misses, drawing mistakes and/or misalignments with the Client’s requirements and standards. Be able to ensure quality control of all documentation regarding kitchen space design and food service equipment specification .
• Assist and/or own the management of all required documents, including reporting and data management tools, design templates etc.
• Track all details of the kitchen design projects, including schedule and budget and be able to communicate potential pain points to the broader food space design team and wider project teams.
• Understand and identify the unique complexities of each project early on in the process in order to objectively identify the most capable resources, specifically but not limited to food service equipment consultants.
• Support the client on Technical Due diligence and Project Briefs, as required, and in alignment with the Food Space Design Management team.
• Establish and nurture relationships with third-party food operators to not only receive insight on local practices & existing facilities but also to run early-stage workshops for specific local input as well as to ensure full alignment on everything related to kitchen and food service equipment.
• Participate in food/kitchen design workshops with architects, food service consultants and other stakeholders, as needed.
• Be an advocate for the Client’s guidelines and requirements on all things kitchen and food service equipment, ensuring global consistency with regional relevance.
• Overall support on equipment selection, suppliers, manufacturers, etc.
• Support project teams, as required, with concept/detailed/technical drawings & specifications to ensure the Client meets standards and specific requirements for each project.
• Attend site visits prior to construction delivery, as required / applicable, and support the creation and management of punch lists in order to address snags.
• Some travel within the region is expected.

Qualifications:

• About 7 years of professional design / design management work with a focus on kitchen spaces and food service equipment.
• Experience within food service or retail operations and flow either through direct experience or professional design work.
• Skilled in the visual, written and verbal communication of design issues with capability to think outside the box and bring creative, non-standard, and innovative solutions to the table.
• Ability to work in a collaborative and fast-paced environment with a great degree of self motivation and initiative.
• Proven vision, leadership and strategic skills to prioritize evolving initiatives in a fast-paced environment; able to turn ideas and capabilities into effective initiatives that engage users.

Job Responsibilities

• Execute procurement duties such as raising Purchase Requisition (PR) and Purchase Order (PO) associated to equipment, goods and services.
• Liaise with suppliers on a daily basis to ensure orders are delivered on same day/next day as required. Keep records for all orders processed and obtain confirmation from vendors.
• Responsible to source for new or alternative supply on products and services.
• Manage purchasing activities and services based on company's needs.
• Negotiate optimal prices for goods and services while maintaining quality standards.
• Receiving products, store them into inventory, or deploy them to the kitchen team for immediate use.
• Inspecting and examining products that have been delivered to determine conformance to the purchase specifications.
• Co-ordinate with Finance department to resolve invoices discrepancies.
• Perform quality checks on stored inventory and perform stock take and flag any discrepancies based on the company’s standards.
• Practicing and enforcing the company's procurement policies and procedures.
• Any other ad-hoc tasks assigned from time to time.

Requirements

• Preferably with Diploma in Procurement/Purchasing and Supply Chain Management or related discipline.
• At least 2 years of Procurement/Purchasing experience in F&B industry.
• Ability to multi-task and prioritize daily workload.
• Good working knowledge of purchasing strategies.
• Excellent communication, interpersonal and negotiation skills.
• Strong analytical thinking and problem-solving skills.

Work Location: MacTaggart Road (nearest mrt- Tai Seng)

Working hours: 9.00 am to 7.00 pm (Monday to Friday)

Interested applicants, please apply with your updated resume, stating your current and expected salary.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

The intern of 6 months is largely expected to work in an office environment from 8.30 am to 6.00 pm on weekdays and may also be required to travel out of the office for meetings. On occasions, the jobholder may need to work outside official hours on weekends to support the running of events.

We are seeking an individual who is either currently pursuing or has completed an IT-related diploma such as Diploma in Applied AI & Analytics or Diploma in Information Technology or Design for User Experience (DDUX) from Singapore Polytechnic or Republic polytechnic. The intern will play a crucial role in the planning and implementation of our Learning Management System and the integration of AI technologies into our systems.

Project Specification Including Learning Points for a Polytechnic Intern Involved in the LMS Tender Preparation at Mendaki

Project Overview

The objective of this project is to prepare a tender document for a new Learning Management System (LMS) that will significantly enhance the delivery of educational programs at Mendaki. This will be achieved by conducting thorough needs solicitation and analysis, which will also provide a practical learning opportunity for a polytechnic intern involved in the project.

Objectives

- To gather and analyse detailed functional and technical requirements for the new LMS.

- To enable the polytechnic intern to gain hands-on experience in project management, stakeholder engagement, and technical documentation.

- To ensure the LMS aligns with Mendaki’s strategic educational and technological goals.

Scope

- The project encompasses the solicitation of needs, comprehensive requirement analysis, and the drafting of a detailed tender document for procuring the LMS.

- Incorporation of specific learning objectives for the intern to ensure a meaningful internship experience.

- Engagement with various stakeholders to refine the requirements and expectations for the LMS.

- Learn new tools to create educational content and support some administrative duties at work

Phases of the Project with Intern Learning Points

Phase 1: Needs Solicitation

(A) Objectives:

- Collect comprehensive user requirements from diverse stakeholders.

- Provide the intern with experience in designing and conducting surveys and focus groups.

- Identify limitations of the current system and desired improvements.

(B) Activities

- Assist in preparing and distributing surveys, conducting interviews under supervision.

- Participate in and document focus group discussions.

- Analyse feedback to help identify critical system requirements.

(C) Learning Points

- Gain insights into effective data collection methods.

- Understand the importance of stakeholder input in project specifications.

- Develop communication and analytical skills.

Phase 2: Requirement Analysis

(A) Objectives

- Translate collected data into actionable system requirements.

- Categorize requirements to prioritize system functionalities.

- Train the intern in requirement analysis and documentation.

(B) Activities

- Collaborate with IT specialists to assess and document technical and functional requirements.

- Help in prioritizing requirements based on impact and feasibility.

- Draft sections of the requirements document.

(C) Learning Points

- Learn how to perform qualitative and quantitative data analysis.

- Develop skills in technical writing and specification documentation.

- Understand system design and architecture principles.

Phase 3: Drafting the Tender Document

(A)Objectives

- Develop a comprehensive tender document that includes all technical specifications and evaluation criteria.

- Educate the intern on the legal and compliance aspects of tender preparation.

- Ensure the document meets all regulatory and organizational requirements.

(B)Activities

- Draft sections of the tender document focusing on technical and functional requirements.

- Define and document vendor qualifications and submission guidelines.

- Revise the draft based on internal feedback.

(C) Learning Points

- Experience in drafting formal procurement documents.

- Understanding of compliance and procurement processes.

- Skills in revising and finalising professional documents based on feedback.

Timeline

Scheduled to begin on Start Date and complete by [End Date], structured to facilitate the intern’s learning process throughout the project duration.

Success Criteria

- Accurate documentation of user needs and system requirements leading to a robust tender document.

- Positive stakeholder feedback on the tender document and project execution.

- Effective learning outcomes for the intern as evaluated through regular reviews and feedback sessions.

- Learn new tools for educational content development and support some administrative tasks

This project specification ensures a structured approach to soliciting needs and preparing a tender document for an LMS at Mendaki while providing a rich learning environment for a polytechnic intern, integrating professional development with meaningful project contributions.

Other Tasks

1.Administrative Support: On the administrative side, the intern could manage schedules, arrange meetings, take meeting notes, and prepare materials for presentations related to project management. This helps in keeping the project timeline on track and ensuring effective communication among team members.

2.Educational Content Development: As part of CDLT, the intern could also assist in developing training materials or guides based on the new system functionalities introduced, facilitating smoother adoption by end-users across the organisationJob Summary:

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• The Research Fellow will work closely with the Principal Investigator, Dr. LIN Yiliang, on the research project of bio-interface design between living systems and materials for healthcare and sustainable applications.
• The Research Fellow will help to develop living materials system integrating functional hydrogels with microorganisms, perform material characterization, and investigate the real-world applications.

Job Requirements

• A PhD degree in a relevant area, e.g., Chemical Engineering, Material Science and Engineering, Chemistry, Biomedical Engineering;
• Good publication record;
• Experienced bio-interface design, construction of living materials, materials characterization, and cell culture.
• Any experience with 1) animal experiments, 2) advanced characterization techniques, and 3) soft matter mechanics and physics, is a plus
• This position is available from Jan 2025

DUTIES & RESPONSIBILITIES

• Repair and maintain, equipment and machines of cold room and ice maker
• Installation of chiller room,freezer room and troubleshooting chiller unit,freezer unit and ice maker
• Troubleshoot systems to determine causes and rectify.
• Service and repair kitchen equipment at work shop such as chiller, freezer ,ice maker ,bracing pan, water boiler, combi oven, dough mixer, spiral mixer and etc
• Prepare quotation and evaluate costing and propose to client.
• Ability to run a team and be responsible for installing and maintaining Cold-room projects.
• Dismantle and replace worn or defective equipment.
• Perform mechanical overhauls and refrigerant reclaiming.
• Install expansion and control valves, compressor, condenser and other components
• Top up gas to the systems
• Keep record of repairs and job schedules.
• Maintain tools and spare parts in good order.
• Practise safe and healthy working behaviour and report hazards and unsafe act.

Candidate Requirements

• Bachelor’s degree in Mechanical Engineering, HVAC Engineering, or a related field.
• Proficiency in CAD and AUTOCAD software.
• Strong knowledge of refrigeration, insulation, and energy-efficient design principles.
• Class 3 driving license is an advantage, but not necessary.
• Able to speak and write English.
• Knowledge of electrical wiring and mechanical works.
• Job requires heavy lifting, climbing and handling of materials
• Able to perform overtime and stand by for emergency
• Manage a team with proper guidance and team framework

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability to [email protected]

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

A global energy efficiency firm is looking for a Senior Electrical Engineer (Control Systems Design) in Singapore. The incumbent will be responsible for supporting and executing research projects related to electrical, power and controls systems (inverter controller, PLC etc.).

Responsibilities:

• Conduct research works pertaining to electrical engineering and control system (PLC)
• Continuous development of energy management system
• Guide and lead junior engineers in research and commercial works
• Engage with clients/partners on research topics and testing purposes
• Stay relevant to industry and innovate new solutions
• Lead junior engineers in research projects
• Provide on-site technical support on electrical and control systems capabilities and limitations

Requirements:

• Bachelor's or Master's Degree in Electrical Engineering or any relevant disciplines
• 5+ years of working experience in research or development for electrical or control systems
• Familiarity in low carbon energy, smart grid, battery (BESS), utilities system would be a plus
• Candidates from engineering consulting background would be preferred
• Programming skills to support research works
• Led a team of junior engineers before
• Experience in control theory and mathematical optimization is a plus

If you are interested, please apply with your latest CV. Only shortlisted candidates will be contacted.

SOG Design is a leading and innovative architectural firm dedicated to designing cutting-edge structures that inspire and transform spaces. We are not just an architectural firm, we are a close and connected group that is passionate about crafting inspiring spaces that push boundaries. With 10 wonderful years in the industry, our journey has been a tapestry of innovation and excellence. From cozy homes to iconic commercial landmarks, our portfolio showcases the vibrant spectrum of our expertise.

Within our team, you will not find only architects, designers and engineers; you will discover a collective of creative minds collaborating like family to bring architectural dreams to life.

Roles & Responsibilities:

· Delivers high quality design and/or technical work, engaging others with their creative and innovative thinking.

· Demonstrates a detailed understanding of the design process and project brief, coordinating the preparation of the project deliverables and other activities related to the project development.

· Takes responsibility for quality control and supervision of project deliverables.

· Coordinates and integrates the work of external contractors, suppliers and professionals.

· Role models and contributes towards a collaborative environment in which innovation is encouraged and best practice shared.

· Builds a network across the business and seeks leadership opportunities by directing and supporting junior team members.

· Develops effective relationships with clients and consultants.

· Support senior colleagues with client presentation, making a positive contribution towards project meetings and client engagements.

· Takes responsibility for aspects of the project budge, and liases with stakeholders to ensure delivery.

· Seeks to develop a working understanding of cost control, fee charging and project finance, and considers how project fees are maximized without threat to client relationship and repeat work.

Job Requirements

· Bachelor/ Master’s degree qualified in related design field or hold equivalent certification; professional registration is preferred.

· At least 10 years’ experience in similar role with responsibilities that apply in-depth knowledge of architectural principles and design.

· Fluent in spoken and written English.

· Enthusiasm for architecture and design, commitment, reliability and team spirit

· Proficient in computer applications commonly used within your discipline - Revit is essential.

· A talented designer, with a portfolio that showcases great creativity and innovative thinking.

· Experience of successfully delivering large scale projects through all work stages, within APAC regions.

· Strong organisational and supervisory skills, you have a proven ability to manage projects and people to deliver great results.

· Ability to work in a fast paced and high-pressure environment, to meet often tight deadlines, and to work pro-actively as part of a committed team.

· Ability to lead, develop and maintain respectful and trusting relationship.

· Ability to relate and work well with people at all levels within the team and within the wider office, as well as externally with clients

· A strong passion for architecture, interior architecture and interior design.

· Proactive, but tactful, in ensuring others within the team meet deadlines (etc)

· Able to travel as required.

Join our team of talented professionals and contribute to exciting and innovative architectural designs. If you are driven by creativity and possess the technical skills to bring your designs to life, we want to hear from you. Apply now and take the next step in your architectural career!

Job Description

We are currently seeking talented individuals with:

• Educational research interest in interdisciplinary studies, including but not limited to STEM education, engineering education
• Able to do literature review and summarize the main findings from the literature
• Able to do qualitative and quantitative data collection and analysis including but not limited to field observation, interview, systematic literature review, video analysis, statistical modeling, SEM, HLM
• Monitor project progress, draft the reports, and manage (e.g., data tools, curriculum exploration)
• Organize PD sessions for teachers in the local and international settings
• Disseminate the outcomes of the research including in peer-reviewed academic publications of international standing
• Assisting with educational research (e.g., STEM education) proposals preparations, as well as seeking and pursuing appropriate external funding in these areas
• Perform other tasks as required by the Principal Investigator and Co-Investigator(s)

Job Requirements

To apply for this position, applicants should be:

• Proficiency or understanding of at least one of the following education-related fields: (1) STEM education, (2) engineering education, (3) psychology, and/or (4) science education
• Knowledgeable in one of the following concepts: (1) curriculum theory & co-constructed lesson designs, (2) evidence-based research, (3) educational theories (e.g., social cognitive theory, pedagogical content knowledge), (4) assessment, and/or (5) teaching and learning methods (e.g., problem-based learning)
• Proficient communication and writing skills in English
• Preferably knowledgeable and familiar with secondary education setting in Singapore
• Possess excellent problem solving abilities as well as strong attention to detail.
• Someone who can work independently while still collaborating effectively within a team environment when needed.