• Experienced in the design of water treatment plants (desalination, potable water, recycle water), wastewater treatment plants (municipal and industrial) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S, Piping & Systems/Skids Engineering and Drafting) on development of engineering deliverable on a timely basis.

• Reviewing and providing input to project schedule and ensure all planned dates and progress are realistic. Provide updates on engineering deliverables per schedules and implement catch-up actions where applicable.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

• Assist the Engineering Manager on the development of FAT, SAT, Pre-Commissioning, Start-up, Commissioning protocol and support the implementation.

• Development of Operational & Maintenance Manual.

• Assist the Engineering Manager to support project management team in project implementation related engineering, troubleshooting and maintenance requirement.

Job Description

• Conceptualisation and design of facades, preparation of drawings and structural calculations
• Delivery of technical presentations
• Coordination with clients, architects, consultants, façade contractors, suppliers and other project team members
• Supervision of construction, site inspection and training of constructors
• Preparation of technical submissions, proposals and documentation

Job Specifications

• Singaporean or PR preferred
• Degree in Civil, Structural or Mechanical Engineering or related disciplines.
• 3 – 5 years of experience in façade design, engineering and construction and project management
• Proficient in CAD software to create designs and solve technical issues.
• Strong and diverse technical background with effective presentation skills
• Well-versed in construction trends, international design standards and building regulations.
• Possess a wide network of building professionals and property developers.
• Ability to multitask and work well in a team.

Knowledge, Skills and Abilities

• Proficient in CAD and 3D Modelling software - Revit, Rhino, Sketchup software
• Possesses deep understanding about various façade materials.
• Well informed in construction trends, international design standards and building regulations.
• Demonstrate organisation and communication skills
• Possesses relationship building and networking skills.
• Skilled in interacting with people of diverse cultural backgrounds at various levels.
• Possesses strong project management skills.
• Willing and able to travel as needed (1 – 2 times/month)

Examine internal IT controls, evaluate the design and operational effectiveness, determine exposure to risk, and develop remediation strategies.

Troubleshoot security and network problems.

Respond to all system and/or network security breaches.

Plan, implement, monitor, and upgrade security measures for the protection of the organization’s data, systems, and networks.

Participate in the change management process.

Test and identify network and system vulnerabilities, and create counteractive strategies to protect the network.

Conduct efficient and effective IT audit procedures.

Communicate complex technical issues in simplified terms to the relevant staff.

Perform regular audit testing and provide recommendations.

Review, evaluate, and test application controls.

Provide recommendations and guidance on identified security and control risks.

Develop a strong understanding of business and system processes.

Requirements:

A degree in information technology/computer information systems or related. (essential).

Certified Information Systems Auditor (CISA) (essential).

7 years of work experience as an IT Auditor.

Experience with firewalls (functionality and maintenance), Office 365 Security, VSX, and Endpoint Security.

Financial and IT application experience

Expert in Firewalls, VPN, Data Loss Prevention, IDS/IPS, Web-Proxy, and Security Audits.

Clear understanding of IT audit methodologies.

Ability to work under pressure in a fast-paced environment.

Strong attention to detail with an analytical mind and outstanding problem-solving skills.

Great awareness of cybersecurity trends and hacking techniques

Job Description

• Industry/ Organization Type: Engineering/Manufacturing
• Position Title: Automation Designer/ Automation Systems Designer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8 am to 6 pm)
• Salary Package: Up to $3800 + AWS
• Duration: Permanent Role

Key Responsibilities

• Working on automation solutions
• Designing and implementing solutions for factory automation
• Conceptualize designs and ensure the functionality of the solutions.

APPLY NOW!!!

• Diploma in Mechanical, Electrical, or Mechatronics Engineering
• Knowledge of Inventor/Solid works and 3D software required
• Experience with microcontroller programming, control systems, and sensor fusion is a plus
• Experience in design and development of mechanical or electrical systems
• Min 1-year working experience with automation factory

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66188 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

We are seeking a skilled and detail-oriented Electrical Project Engineer with a minimum of 3 years of experience in electrical engineering, including at least 1 year of experience in data center projects. The successful candidate will manage and supervise the installation of electrical systems in data centers, ensuring all work meets project specifications, industry standards, and safety regulations.

Key Responsibilities:

• Project Management: Oversee and coordinate the installation of electrical systems in data centers, ensuring compliance with project plans, timelines, and budgets.
• Technical Supervision: Supervise subcontractors during the installation of electrical systems, including power distribution, UPS, and generators.
• Quality Assurance: Ensure all electrical installations meet quality and safety standards, as well as project-specific requirements.
• Problem Solving: Address any issues that arise during installation, troubleshooting electrical systems as needed.
• Collaboration: Work closely with the project team, contractors, and stakeholders to ensure smooth project delivery.
• Testing and Commissioning: Support the testing, commissioning, and handover of electrical systems to ensure proper operation.
• Documentation: Maintain accurate project records, including technical reports, installation documentation, and as-built drawings.
• Regulatory Compliance: Ensure compliance with local electrical codes and standards, as well as the company’s internal safety policies.

Requirements:

• Experience:Minimum of 3 years of experience in electrical engineering.
  At least 1 year of direct experience working on data center/oil&gas projects
• Technical Knowledge: Strong understanding of electrical systems, including power distribution, UPS, and generators.
• Project Skills: Proven experience in managing subcontractors and project timelines, with a focus on quality and safety.
• Communication Skills: Excellent communication and interpersonal skills, with the ability to work effectively with contractors and stakeholders.
• Travel: Willingness to travel to project sites as needed.

Process Engineer (Dry Etch)

Yishun, Singapore

Who We Are:

Lumileds is a global leader in OEM and aftermarket automotive lighting and accessories, camera flash for mobile devices, MicroLED, and light sources for general illumination, horticulture, and human-centric lighting. Our approximately 5,500 employees operate in over 30 countries and partner with our customers to deliver never before possible solutions for lighting, safety, and well-being.

The Lumileds environment is fast-paced, cutting-edge, intelligent and fun! We are looking for exceptional talent to join our team! To learn more about our company and solution portfolios, please visit https://lumileds.com

What You Will Do:

· Championing engineering experiments for process characterization to drive for quality, yield and cost down improvement.

· Establishing good process margins and inline controls for dry etch and measurement process.

· Troubleshoot out-of-control situations and process issues and put corrective actions in place.

· Drive productivity improvement through process optimization.

· Creating and updating of process specification and documentation of working procedure.

· Setup, monitor and maintain SPC charts.

· Sustain and/or improve Process Capability, CpK

· Establish Out-of-control Action System, specifications for procedures to be followed.

· Lead trouble-shooting of defect and yield issues and process excursions.

· Any other duties assigned by the manager.

What You Will Bring (Required Qualifications):

· Min 1-3 years working experience in semiconductor industry. Candidate with metrology background will be added advantage.

· Self-driven and strong team player with keen technical ability, hands on, systematic approach, and positive attitude.

· Ability to work independently, be hands-on and expected to dive into technical details as required.

Education (Minimum Level)

· Bachelor's

Field of Study

· Degree in Engineering (Electrical/Electronics, Material Sciences, Mechanical, Chemistry or equivalent)

Years of Experience (Minimum)

· 1 - 3 years

Lumileds is an Equal Employment Opportunity Employer

Responsibilities

• Diagnose and troubleshoot issues with marine engines, auxiliary systems, and other vessel components.
• Perform repairs on inboard/outboard engines, including fuel, cooling, and exhaust systems.
• Conduct routine maintenance to ensure shipboard systems are in good working order.
• Maintain cleanliness in ship and engine rooms when onboard.
• Provide detailed reports on repairs and explain services performed to customers.
• Adhere to safety protocols and ensure compliance with environmental regulations.
• Maintain accurate service records, including parts used and time spent.
• Collaborate with other technicians and assist in mentoring junior staff.

Requirements:

• Diploma or technical certification in marine mechanics or a related field.
• Minimum 2 years of experience in marine service and repair.
• Strong mechanical skills, with knowledge of marine engines and cargo pumps.
• Proficient with diagnostic tools and service equipment.
• Ability to interpret technical manuals and handle physically demanding tasks.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: L3V5938V

Contract duration: 1 year contract (renewable subject to work performance)

Location: Changi Business Park / Marina Bay Financial Centre
Salary: Up to S$7,200

Key Responsibilities:

• Implement and enhance DevOps practices (design, approvals, development).
• Improve CI/CD frameworks and processes.
• Use Infrastructure as Code (IaC) to create new environments.
• Troubleshoot and resolve build/release issues.
• Propose and implement branching strategies.
• Onboard applications to the DevOps pipeline.
• Manage UAT environments, including health checks and troubleshooting.
• Automate production deployments.
• Share DevOps best practices across the organization.

Requirements:

• Bachelor's Degree in Computer Science, Information Technology, or a related field.
• Minimum of 3-5 years of relevant experience in DevOps practices, CI/CD pipelines, and related technologies.
• Proficient in IaC, build/release troubleshooting, and automation tools.
• Strong organizational and communication skills.
• Experience with Jenkins, OpenShift, Kubernetes, Java, Node.js, and Gitflow.
• Passion for learning and continuous improvement.

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Sales Engineer
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9am – 5.30pm (One Saturday per month, 9am – 12pm)
• Salary Package: Up to $4,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Identify and develop new business opportunities by expanding the customer base.
• Prepare detailed sales reports, monitor project progress
• Act as the primary point of contact between various suppliers and customers to meet project and sales objectives.
• Contribute to achieving the company’s overall sales and marketing goals by aligning with the strategic plans.
• Manage any additional tasks assigned.

APPLY NOW!!!

• Degree in Mechanical, Electrical, or related Engineering fields.
• Willingness to travel across various Asian countries for sales promotions and client meetings.
• Proficiency in Microsoft Word, Excel, and PowerPoint.
• Inexperienced candidates are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70294 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Summary
• This role is responsible for driving a team of machine learning engineers and data scientists, guiding the development of machine learning software. The role collaborates with business stakeholders to understand goals and define machine learning product requirements. The role develops product roadmaps, allocates resources, and sets clear milestones for the team.

Responsibilities
• Architects, develops and programs integrated software solutions, especially in support of the development, deployment and life cycle of machine learning models.
• Designs machine learning systems, runs machine learning tests and experiments, and retrains systems when necessary.
• Delivers results according to product strategy schedules and quality while maintaining SLAs on velocity, productivity, and quality.
• Trains, tests and deploys machine learning models for multiple products.
• Participates in design reviews with peers and stakeholders to decide among available technologies.
• Collaborates with data science and engineering teams to integrate machine learning solutions.
• Engages in state-of-the-art research in AI and ML, ensuring the team remains at the forefront of the industry.
• Leverages deep algorithmic knowledge to design and implement robust machine learning solutions.
• Maintains a high-performing team.

Education & Experience Recommended
• Four-year or Graduate Degree in Computer Science, Statistics, Mathematics, Data Science, or any other related discipline or commensurate work experience or demonstrated competence.
• Typically has 10+ years of work experience, preferably in computer programming languages, machine learning, algorithms, statistical methods, or a related field.

Knowledge & Skills
• Agile Methodology
• Algorithms
• Amazon Web Services
• Apache Spark
• Artificial Intelligence
• Automation
• Big Data
• C++ (Programming Language)
• Computer Science
• Data Science
• Deep Learning
• Java (Programming Language)
• Machine Learning
• Microsoft Azure
• Natural Language Processing
• Python (Programming Language)
• PyTorch (Machine Learning Library)
• Scikit-learn (Machine Learning Library)
• Software Engineering
• TensorFlow

Cross-Org Skills
• Effective Communication
• Results Orientation
• Learning Agility
• Digital Fluency
• Customer Centricity

Impact & Scope
• Impacts large functions and leads large, cross-division functional teams or projects.

Complexity
• Provides highly innovative solutions to complex problems within established policy.

Disclaimer
• This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

#LI-POST

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

General Job Description

We are looking for a highly skilled and experienced full stack programmer + Mobile application to join our team. In this role, you will be responsible for designing, developing, and maintaining a range of front-back-end and mobile applications.

To succeed in this role, you should have extensive experience in full stack programming, with strong skills in front-end and back-end development. In addition, you should have experience working with Ionic to develop mobile applications, as well as knowledge of algorithms and machine learning.

Software Development & Support Engineers serve primarily to Develop, test, diagnose, trace and address technical issues relating to software development, implementation, function and upgrades. They resolve also customer complaints or problems and create problem reports and troubleshooting documents for each issue to be handled by the developers. They review error logs, oversee source code repositories and software configurations, and work with third-party software vendors as needed.

Software Development & Support Engineers also work closely with the core development teams to identify and resolve any technical problems that might arise during the development of software.

Educational Requirements

Software Development & support engineers are typically required to have at least a bachelor's degree in engineering, computer science, or a related technological field.

Key Responsibilities

• Design, develop, and maintain front-back-end and mobile applications using a range of technologies and frameworks
• Collaborate with other team members to ensure that the applications are well-designed, efficient, and effective
• Write clean, well-structured, and well-documented code
• Test and debug applications to ensure that they are free of errors and perform well
• Support the team and the customers on issue that might need to be addresse
• Continuously learn and stay up-to-date with the latest technologies and best practices in the field

Job Skills

Software Development & support engineers must have excellent communication and interpersonal skills. They will need to communicate with a variety of people, who don't all have the same technical knowledge. Patience and attentiveness will help support engineers explain problems and fixes in an easily understood way and address the user's specific concerns. Development & Support engineers often deal with people who are very frustrated and short on time, so experience in customer service is an advantage.

Development & troubleshooting are the main functions of this job, and problem-solving skills are essential to success as a software Development & support engineer.

Software Development & support engineers needs many technical skills. Some of these skills needed are:

Languages, Tools/IDEs and Framework:

• Scripting, design, programming, and coding
• PC/Mac systems and other mobile operating systems
• C, C++, JavaScript, PHP, Python, or similar scripting languages
• SQL, Unix shell
• Linux/Unix/Ubuntu
• MySQL, SQLite
• Laravel, Angular2+
• Ionic (> 5)
• 5+ years of experience in full stack programming + mobile app

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus: Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators.
• Collaborative Coordination Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving:Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements

• Experience: Min10 years of QAQC experience with at least 3 years in a leadership/supervisory.
• Skills: Proven track record with strong coordination skills.Excellent planning and organizing skills.Excellent communicator Excellent collaborator with cross-functional teams In-depth knowledge of quality management system (ISO 9002, API Q1/Q2)

Responsibilities

• Provide day-to-day support of IT computing devices and troubleshooting via emails, phone calls, and walk-ins
• Perform first level support to troubleshoot and solve technical issues
• Perform L2 and L3 escalations if necessary and required
• Ensure and follow help desk procedures for all call and ticketing tracking from start to end (initial support to resolution)
• For outstanding issues pending user response, report and alert the IT Manager / POC for internal escalation procedure
• Interface with other maintenance vendors (vendor management) for problem reporting and resolution
• Perform IT project rollout as planned by the Customer, including new PC purchase. receiving, move and change (IMAC Services)
• To be responsible for accurate record keeping, tracking and processing of all documents related to IT
• Any other ad-hoc duties assigned by supervisor

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Service Engineer

Salary: $3,000 - $4,000 + OT + AWS + Performance bonus

Working Days: Monday - Friday (8:30am – 4.30pm)

Working Location: Tuas (Company pick up available - West & North)

Our client is one of the world's largest manufacturers of hydraulic mobile cranes, and it has a wide product range.

Job Description:

• Product delivery training to distributors and customer
• Provide diagnosis guidance and analysing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.
• Willingness to work beyond office hours if required and any other ad-hoc duties assigned from time to time.

Requirements:

• Diploma and/or certificates in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram
• Possess valid Class 3 Driving License

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Responsibilities

· Develop and implement supplier quality monitoring systems to ensure materials and components meet quality standards. Identify and address any non-conformance issues with suppliers.

· Collaborate with suppliers to optimize their processes, enhancing yield and ensuring consistent quality of materials and parts.

· Lead efforts to address and resolve abnormal quality issues with suppliers, implementing corrective and preventive actions.

· Conduct supplier audits to assess quality systems, process capabilities, and compliance with industry standards. Drive improvement initiatives based on audit findings.

· Work with suppliers to develop their quality processes, ensuring alignment with company standards and customer expectations.

· Coordinate with design, production, and procurement teams to ensure seamless communication and alignment on quality expectations from suppliers.

· Promote a culture of continuous improvement by working closely with suppliers to enhance their quality management systems and manufacturing processes.

Requirements

· Bachelor’s degree or above.

· Proven experience in supplier quality engineering, particularly in a manufacturing or electronics environment.

· Strong knowledge of supplier quality management systems and standards. Excellent analytical, problem-solving, and negotiation skills.

· Familiarity with supplier audits, corrective actions, and continuous improvement processes.

· Certification in Six Sigma or similar is a plus.

· Willingness to travel extensively and work abroad in China or Vietnam at least 10 months per year.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

Position: Mechanical Project Engineer
Location: Singapore
Employment Type: Full-Time

Job Overview:

We are seeking a highly motivated and experienced Mechanical Project Engineer to join our team for exciting data centre projects. The ideal candidate will have a strong background in mechanical engineering and hands-on experience working on data centres. This role will focus on ensuring the successful planning, coordination, and execution of mechanical systems within data centre environments.

Key Responsibilities:

• Project Coordination: Assist in planning and managing the mechanical systems for data centre projects, ensuring compliance with design specifications and project timelines.
• System Design and Implementation: Oversee the installation of HVAC, cooling systems, and other critical mechanical infrastructure.
• Vendor and Contractor Management: Coordinate with contractors and suppliers to ensure proper installation and integration of mechanical systems.
• Mechanical Systems Testing: Conduct tests and inspections on HVAC and cooling systems to ensure optimal performance.
• Troubleshooting and Problem Resolution: Identify issues in mechanical systems during construction or post-installation and provide solutions in a timely manner.
• Documentation: Prepare and maintain accurate project documentation, including technical reports, drawings, and schedules.
• Collaboration: Work closely with the project manager, electrical engineers, and other stakeholders to ensure mechanical systems align with the overall project goals.
• Health and Safety Compliance: Ensure all mechanical engineering activities comply with local regulations, codes, and safety standards.

Job Requirements:

• Experience:At least 3 years of experience in mechanical engineering, with a minimum of 1 year working on data centre/oil and gas projects.
• Strong understanding of HVAC, cooling systems, and mechanical infrastructure in data centres.
• Problem-Solving Skills: Ability to troubleshoot mechanical issues efficiently and recommend solutions.
• Communication: Excellent communication skills for interacting with contractors, vendors, and project teams.

• 14th-month AWS & Performance Bonus
• 5-days work week
• Job Stability, Career Growth, Comprehensive Group Insurance

Job Description:

• Provide the latest information on product specifications and applications in the market as a reference for customers when designing products
• Discuss and understand customers detailed technical requirements, assess specific questions, and adapt the necessary training delivery approach
• Understand the customer industry, industry competition and market conditions by interacting with customers
• Actively understand customer needs and respond quickly
• Performs duties well, supports team decision, and achieves common goals
• Attend lessons and test conducted by suppliers

Job Requirements

• Graduated with a Degree or Diploma in Engineering, Electronics, Physics, Chemistry or related is mandatory.
• At least 1 year's experience in technical customer support or technical training.
• Driven by helping others, customer focused and a problem solver.
• Candidate must be able to converse in Chinese (Mandarin), in order to communicate with our HQ Taiwan Chinese-speaking colleagues
• Intermediate knowledge of popular OS like Windows 7/10/11, Linux (Ubuntu)
• Knowledge of C#, SQL or Python is a plus

If you keen to explore further, please send your latest CV with your reason for leaving, expected salary by clicking the "Apply Now" to our HR dept. We regret only shortlisted candidates will be notified.

up to 4.2K

• Support start-up, contract maintenance and other service activities with emphasis on safety and protection.

• Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.

• Participate in service and repair of gas detectors, safety activities, emergency response, breakdown calls and ad hoc projects.

• Manage all orders efficiently until fulfilment stage, by working closely with Service team. • Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.

• Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency.

• To provide support to other service activities that may be assigned in the course of work • Effective communication of technical information to employees, customers and external parties in an accurate and concise manner in both a written and verbal media.

• To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

If you are interested and meet the requirements, please apply with your resume to [email protected] or contact via Telegram @jocelynchan.

Jocelyn Chan | Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience)
Company EA Licence Number: 99C4599
Personnel EA License: R1331820

Main Role and Responsibilities

• The candidate will be responsible for automating deployments of various infrastructure deployment elements using VMware vRealize Automation and Orchestration
• I need to understand infrastructure elements and deployment architecture.
• A strong programming background and the ability to consistently deliver successful outcomes on infrastructure automation solutions are essential for this role.
• The candidate should have a good understanding of interfacing applications with vRA / vRO APIs
• A strong programming background and the ability to consistently deliver successful outcomes on infrastructure automation solutions are essential for this role.

Skills:

• Hands-on project execution experience using Ansible, PowerShell and customization of workflows using Orchestration in VMware vRealize Suite environment.
• A good understanding of infrastructure elements, virtualization and sizing like CPU, RAM and Hard Disk usage.
• Candidate should be prepared to work extended hours specifically for giving hyper support after production release.

Position title : Vision Software Engineer

• Location: Admirax St (Sembawang)
• Working Days: 5 Day A Week
• Working hours : 9:00am - 6:00pm
• Salary : $5000 - $8000 (depends experience)

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for designing, developing, and maintaining software applications for vision systems.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.

We are innovative, focused and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state of the art solutions as part of Team Rapsodo.

This role requires a highly versatile skill set and you will have opportunities to contribute to all relevant domains. Your responsibilities will include development and enhancing of new and existing products.

Responsibilities:

• Hardware Design, document and develop optimized hardware- PCB Layout and Schematic Capture
• Testing, bug fixing, improving hardware performance
• Create schematic and PCB Library and Bill of Materials
• Preparing plans and documentation to support product through certification/approval
• Assisting on product issues both during production and in-service

Requirements:

• Bachelor's Degree in Electrical or Electronics Engineering preferred
• Minimum 5 years of experience in Hardware Design, Validation, & Optimization
• Proven Experience in High Speed Digital board design with experience in interfacing bus standards like DDR3/4/ LVDS/MIPI/PCIe etc.
• Analog Circuit Design & Simulation
• Experience in developing complex CPU and microcontroller-based system
• Experience in dealing with regulatory requirements such as FCC/CE
• Experience in Design Tools (Altium Designer, Pads logic and layout, Allegro or OrCAD, Microsoft Office package, JIRA, VHDL, Linux)
• Ability to work in a dynamic environment with good communication and interpersonal skills

• Different positions available

RESPONSIBILITIES:

• Develop and monitor project schedules as per completion dates simulated in contract.
• Prepare and update baseline programme, 6 months look ahead programme, 3months and 4 weeks rolling programme.
• Prepare monthly progress report with Progress S-curve.
• Coordinate with internal QS and engineers for site progress update and claims.
• Coordinate with client’s planner on programme and progress matters.
• Proficient in Primavera P6 and Microsoft Excel.
• Basic technical expertise and knowledge on Air Conditioning and Mechanical Ventilation works.

REQUIREMENTS:

• Degree in Engineering/Construction related disciplines or equivalent field from a recognized institution
• Knowledge of planning processes, tools etc.
• At least 3 Years of relevant experience in the construction and building industry. Preferably specializing in Engineering - Civil/Construction/Structural or equivalent.

OTHER INFORMATION:

• Salary: From $4,000-$5,000 / Negotiable (Salary will commensurate according to experience & qualifications).

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Your Role

As a Lead ML Engineer, you will play a leading role in operationalizing ML Models developed by CLIENT’s data scientists. You will serve as the focal point for ML model refactoring, optimization, containerization, deployment, and quality monitoring. Your main responsibilities will include:

• Conduct reviews for compliance of the ML models in accordance with overall platform governance principles such as versioning, data / model lineage, code best practices and provide feedback to data scientists for potential improvements
• Develop pipelines for continuous operation, feedback and monitoring of ML models leveraging best practices from the CI/CD vertical within the MLOps domain. This can include monitoring for data drift, triggering model retraining and setting up rollbacks.
• Optimize AI development environments (development, testing, production) for usability, reliability and performance.
• Have a strong relationship with the infrastructure and application development team in order to understand the best method of integrating the ML model into enterprise applications (e.g., transforming resulting models into APIs).
• Work with data engineers to ensure data storage (data warehouses or data lakes) and data pipelines feeding these repositories and the ML feature or data stores are working as intended.
• Evaluate open-source and AI/ML platforms and tools for feasibility of usage and integration from an infrastructure perspective. This also involves staying updated about the newest developments, patches and upgrades to the ML platforms in use by the data science teams.

Technical Skills

• At least 10 years of experience as a ML Engineer, working with Python, ML libraries, and large-scale data processing framework.
• Advance proficiency in Python used both for ML and automation tasks.
• Experience in working with ML libraries such as Panda, NumPy, H2O, or TensorFlow.
• Experience in working with large-scale data processing framework, such as Hadoop, Spark, or Dask.
• Knowledge of OpenShift / Kubernetes is a must-have.
• Good knowledge of Bash and Unix/Linux command-line toolkit is a must-have.
• Hands on experience building CI/CD pipelines orchestration by Jenkins, GitLab CI, GitHub Actions or similar tools is a must-have.
• Knowledge in the operationalization of Data Science projects (MLOps) using at least one of the popular frameworks or platforms (e.g., Kubeflow, AWS Sagemaker, Google AI Platform, Azure Machine Learning, DataRobot, Dataiku, H2O, or DKube).
• Knowledge of Workflow Orchestrator, such as Airflow or Ctrl-M.
• Knowledge of Logging and Monitoring tools, such as Splunk and Geneos.
• Experience in defining the processes, standards, frameworks, prototypes and toolsets in support of AI and ML development, monitoring, testing and operationalization.
• Experience in ML operationalization and orchestration (MLOps) tools, techniques and platforms. This includes scaling delivery of models, managing and governing ML Models, and managing and scaling AI platforms.
• Knowledge of cloud platforms (e.g. AWS, GCP) would be an advantage.

Soft Skills

• Good knowledge of Devops process and principles
• Strong in Software Engineering fundamentals
• Excellent communication skills
• Attention to detail
• Analytical mind and problem-solving aptitude
• Strong Organizational skills
• Visual Thinking

• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303