*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Execute the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE requirements

Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase / Commercial proposal development

▪ Bill of material

▪ Plot plan layout proposal

▪ Support lead to define man hour and cost estimate D - Project Execution

▪ Ensure the Piping and Layout engineering support to different projects

▪ Ensure the achievement of assigned goals and the fulfilment of project quality requirements and contractual obligations

▪ Analyse technical documents (e.g. specifications, calculation notes, drawings) to assess the scope of the studies required and the potential risks

▪ Seek solutions which can bring overall savings to the project

▪ Estimate quantities or validate estimation done by other specialist of the team

▪ Check all produced documents (internal or subcontracted) like design reports, technical specifications, drawings under responsibility

▪ Write the Piping and Layout methodologies / Design Premises comprehensive of all necessary data, general and specific design guidelines

▪ Ensure the achievement of assigned goals and the fulfilment of project quality requirements and contractual obligations

▪ Analyse project technical documents to validate consistency between the budget, resources and means allocated for the work completion and the targets to be met

▪ Organize the work of the team under responsibility

▪ Define and follow-up the planning of resources mobilization

▪ Monitor and report actual progress including 3D / check for Discipline activities, includ ing control of men-hours and delivered documents

▪ Control the input data for team activities and check/review all documents issued by the team

▪ Attend to internal review activities and inter-discipline check meetings

▪ Provide technical support to Project group

▪ Provide technical support to Procurement, Subcontracting and Construction activities included in the scope of work

▪ Supervise the writing of specifications and requisitions as well as technical bid evaluations

▪ Inform on a permanent basis the Project Piping and Layout leader of any foreseen technical or financial or delay risk

▪ Feed the Piping and Layout Department improvement system by reverting the lessons learned during the project E - Construction and start up

▪ Participate to test circuit verification

▪ Field engineering during construction activities

▪ Assist, when necessary, engineering adjustment on site

▪ Material management at site

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Perform tasks within the assigned area of responsibility while ensuring compliance with QA/QC and HSE requirements.Tasks Include:

- Continuously verify that input information used for assigned work aligns with project developments and report any anomalies to the Project Piping and Layout Designers or Project Specialist Lead.
- Conduct 3D modeling using PDMS, PDS, or SmartPlant 3D software.
Create construction or design drawings for piping networks using 2D software or by extracting details from 3D models (e.g., overall plot plans, equipment layouts, piping general arrangements, piping isometrics, and piping supports).
- Generate bills of materials (BOMs) or material take-offs (MTOs) for requisitions.
- Maintain document quality through thorough and consistent self-checks.
- Approve and sign off on produced documents.
- Communicate any modifications resulting from issued documents to relevant stakeholders.
- Verify documents produced by other draftsmen on the team, as needed.
- Update documents following feedback or comments from inter-discipline checks or external project stakeholders (e.g., Client, Yards, or Third-party reviews).
- Apply relevant provisions of the Piping and Layout Department

- Quality Control Procedure during all assigned tasks.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements.

Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase / Commercial proposal development

▪ Estimate quantity and cost for critical support

D - Project Execution

▪ Be responsible for the quality, respect of budget and respect of project schedule for piping flexibility analysi s tasks

▪ Review the Client technical documentation and requirements

▪ Be responsible for the design of all piping supports components

▪ Issue project piping flexibility (Stress analysis) specification and critical lines list

▪ Perform calculations of critical piping networks

▪ Issue loads to allow the design of pipe-rack and foundations

▪ Issue technical part of requisitions for all piping supports components required by flexibility analysis

▪ Issue technical bid evaluation for all piping supports components offers

▪ Issue technical part of requisitions for all piping supports components purchase orders

▪ Review and approve vendors documents

▪ Maintain project technical files and update Company standards

▪ Perform the inter-disciplines checking for the part of documents in accordance with the scope of piping flexibility section

▪ Check sub-contracted discipline engineering documents in accordance with the scope of piping flexibility section

▪ Check documents issued by piping flexibility engineers

▪ Check the isometrics for construction of critical lines

▪ Assist P and ID section preparation for flexibility inputs of line list

▪ Inform on a permanent basis the Project Piping and Layout leader of any foreseen tech nical or cost impact or delay risk

▪ Capitalize piping flexibility activities performed during the project E - Construction and start up

▪ Provide technical support

▪ Assist, when necessary, engineering adjustmenton site

F - Home ofice activities (Master)

▪ Projects coordination: provide input to Flexibility Engineer to harmonize design and methodologies

▪ Provide support to projects and procurements to solve non standards problems

▪ Define the modification of department work flow and dep technical standards

▪ Participate to the modification of company work flow and technical standardisation

▪ Collect project feed backs for continuous improvement implementation (Lesson Learned)

▪ Participate to vendor and outsourcing qualification

▪ Participate to project/company procurement strategy (Purchasing team)

▪ Develop and scout tools for simplified design activities

▪ Plan, control and manage outsourcing engineering center

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Key Responsibilities:

A. Development of Technology Expertise and Commercial Support

B. Feasibility

• Provide technical support to other project roles for specialist matters.

C. Bidding Phase / Commercial Proposals

• Analyze and interpret tender documentation.
• Define discipline-specific activities and deliverables, coordinating them in line with the project schedule.
• Identify and submit technical queries, deviations, and alternatives.
• Implement bidding methodologies, design criteria, and guidelines.
• Develop and issue requests for quotations for items not estimated in-house.
• Coordinate material quantity and weight estimation.
• Prepare engineering man-hour and material cost estimates.
• Assist the Proposal Manager during technical clarification meetings with the client.

D. Project Execution

• Ensure assigned goals are met while adhering to project quality and contractual standards. Take corrective action as needed within the team and escalate significant issues to the TM.
• Define activities and deliverables, establish timelines, and coordinate efforts per contractual obligations.
• Monitor and manage project progress and man-hour consumption.
• Prepare technical annexes for subcontracted engineering activities.
• Oversee subcontractor coordination and report discipline budget costs to the PM.
• Ensure discipline workflows, interfaces, quality checks, and the approval of all discipline project documents, including vendor submissions.
• Track and report scope of work changes to TM, updating man-hour and cost estimates as needed.
• Provide technical support to procurement and construction teams.
• Assist PM with client technical interactions, as directed by TM.
• Define and issue purchase requisitions.
• Perform technical bid evaluations and follow up with vendors.
• Support the creation of discipline construction inspection plans and manage vendor inspection test plans.

E. Construction and Start-Up

• Assist the construction team in implementing engineering solutions on-site.

F. Home Office Activities (Master)

• Verify man-hour and cost estimates.
• Review and validate key project documents in accordance with internal procedures.
• Assist project teams in resolving non-standard technical challenges.
• Update discipline workflows and technical standards.
• Contribute to the definition of execution plans.
• Track and analyze discipline project KPIs.
• Participate in vendor technical qualifications and procurement strategy development.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading global engineering and project management consultancy embarking on large-scale infrastructure and environmental projects.

*Please note that this role will be hired on a long-term contract to support our client's project.

*Work Location: West

*Salary Range: $4,500 - $6,000

About the role:

Pre-contract and post contract administration including the following: -

· Cost estimating and cost planning.

· Preparation of tender documents (including measurements and Bills of Quantities).

· Tender management including evaluation of tender submission.

· Assist Contracts Manager, Project Manager in Contract management and cost monitoring, management of interim/progress payment, including variation assessment and finalisation of account.

· Possess comprehensive knowledge of construction, logistics, material management and the ability to provide cost and financial advice.

· Relevant duties as and when assigned by reporting manager.

About you:

· Preferably Diploma in Quantity Surveying/ Construction Management/ Building Services or higher qualification recognized by Singapore Institute of Surveyors and Valuers (SISV).

· Minimum 5 years of relevant working experience in supporting Project Managers/Contract Managers in the delivery of projects in engineering and construction industry.

· Meticulous, independent, highly motivated, results-oriented and good team player.

· Able to manage stakeholders (Contractors, Client and Consultants).

· Good written and oral communication skills.

· Able to meet tight deadlines.

· Experienced in Public Sector Standard Conditions of Contract (PSSCOC) preferred.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

A. Development of Technology Knowledge & Commercial Support
Provide technical assistance in their area of expertise.
B. Feasibility
Offer technical support for project feasibility studies.
C. Bidding Phase/Commercial Proposal Development
- Review technical documents related to tenders.
- Define activity and deliverable lists, and coordinate tasks according to the project schedule.
- Identify and address technical queries, deviations, and alternatives for submission.
- Apply bidding methodologies, design criteria, and guidelines.
- Assist the proposal team with RFQs for commercial purposes.
- Estimate material quantities and weights (MTOs).
- Prepare manhour, item, bulk, and material cost estimates.
- Engage with clients and attend clarification meetings.
D. Project Execution (Job Progress and Completion)
- Achieve assigned goals and meet project quality and contractual requirements.
- Collaborate with the Discipline Leader to define activity and deliverable lists, set schedules, and coordinate activities per contractual requirements.
- Develop design specifications for civil works, including concrete works, plant roads, underground networks, and piling.
- Prepare detailed BOQs for civil works and buildings and MTOs for steel structures.
- Create technical documentation for subcontracted engineering activities.
- Design systems for drainage, sewage, plumbing, and building interiors.
-Conduct studies for foundations and concrete structures.
- Perform quality checks on all discipline-related project documents, including vendor submissions.
- Track and report scope changes to the Discipline Leader, updating manhour and cost estimates.
- Provide technical support to procurement, construction, and other project functions.
- Assist the Discipline Leader/TM in interfacing with clients on technical matters.
- Develop technical documentation for civil material requisitions and support procurement with technical evaluations.
- Collaborate with the Discipline Leader on Technical Bid Evaluations.
Review and address Client's technical documentation and requirements.
- Maintain project technical files.
- Execute assigned engineering activities, including detailed design, verification, and studies.
- Supervise and approve engineering designs and construction drawings for civil items like foundations, structures, and buildings.
- Monitor and report trends in civil quantities compared to bid-phase estimates.
- Design functional layouts, architectural aspects (3D modeling), and interior finishes, including furniture.

E. Construction & Start-Up
Provide field engineering support on-site.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Bidding Phase:

• Assist Project Management in selecting CAD software, evaluating client requirements, and exploring alternative solutions.
• Support Project Management in assessing cost and schedule impacts associated with 3D model tool selection.

Project Execution:

• Ensure the review and application of contractual requirements within the area of responsibility.
• Prepare project specifications for 3D software setup and user guidelines.
• Set up 3D modeling and review tools, providing support to 3D model specialists.
• Collaborate with the ICT team to manage activities related to 3D modeling software systems.
• Develop and maintain component libraries by gathering required component dimensions and data.
• Identify critical issues in 3D model development within the scope of responsibility and propose recovery measures.
• Establish tools for issuing 2D drawings and extracting data, including piping isometric drawings and MTOs.
• Configure the 3D model for data import and export processes.
• Ensure standardization of 2D drawing formats and 3D model elements.
• Contribute to constructability analyses through dedicated review sessions.

Construction Phase:

• Assist the construction team in setting up spooling tools.
• Provide support for as-built 3D modeling activities.

Staff Activities:

• Advocate for the optimization of engineering workflows and technical standards to enhance efficiency.
• Gather project feedback to drive continuous improvement of workflows (Lessons Learned).
• Research and evaluate new CAD tools in the market.
• Identify skill gaps and coordinate CAD software training for personnel.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading international chemical manufacturing company.

Work Location: Jurong Island (company transport provided)

About the role:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of:

(a) daily maintenance [preventive, corrective, & breakdown maintenance],

(b) transition maintenance,

(c) turnaround maintenance and

(d) upgrading and improvement related to maintenance

• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s
• HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability
• objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

About you:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.
• An aptitude for and interest in chemical process
• Analytical skills
• Ability to work well under pressure
• Good communication skill and able to collaborate with different functions
• Problem-solving skills

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is in the Waste management industry.

About the role:

• Products / Systems Manage product life cycles including new products and accessory configuration updates.
• Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements.
• Focus on Product and system Application Development for Southeast Asia and China, including technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design (Team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

• To attend technical review with sales team
• To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

• To attend coordination meetings with architects, m&e and structural consultants
• To coordinate and determine the level of pipe sleeve crossing under major roads
• To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc
• To determine the position and depth of launching pits that will aid the installation under major roads
• To study and highlight authority requirements during the meeting.
• To reply to HDB review form
• To reply to NEA BP, DC, WD Advise
• To produce preliminary drawings to aid the tender process for main contractor
• To prepare drawings for PWCS QP endorsement
• To prepare drawings for Acoustic Consultant’s specifications
• To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

• To attend technical meetings with main contractors
• To coordinate pipe clashes with m&e and structural services

Design Support

• To generate fabrication drawings for non-standard equipment
• To monitor project design submission schedule
• To allocate work assignments to other designers
• To check designs, shop drawings done by other designers
• To hold trainings to designers

About you:

• Bachelor’s or master’s degree in automation, mechanical engineering or relevant fields.
• More than 8 years product and application experience in Construction/Engineering industry.
• Good business negotiation and presentation skills.
• Excellent communication skills with local and western customers and colleagues.
• Good leadership to lead technical team to enable faster business growth.
• Proper flexibility and agility.
• Goal and results oriented.
• Able to work independently with professional judgments, proactivity and team player spirit.
• Willing to take up challenging assignments with such track records.
• Revit & AutoCAD

Other information:

• Work location: Central
• Working days: Mon-Fri, 9am to 6pm

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Carry out activities within the assigned area of responsibility, ensuring compliance with QA/QC and HSE standards.Tasks Include:

A - Development of Technology Knowledge and Commercial Support

B - Feasibility

C - Bidding Phase/Commercial Proposal DevelopmentD - Project Execution
- Design, execute, or review piping and layout studies, including:3D modeling.
- Review of 3D models with other disciplines and issuing clash check reports.
- Preparation of construction or design drawings (2D or extracted from 3D) for piping networks, including overall plot plans, equipment layouts, piping general arrangements, piping isometrics, and piping supports.
- Development of bills of materials or material take-offs (MTOs).
- Extraction of bills of materials and related information from 3D CAD models.
- Organize the team’s workflow and oversee resource mobilization planning.
- Coordinate the team’s work with piping and layout engineers involved in the project.
- Verify input data and review all documents and outputs generated by the team.
- Continuously monitor project assumptions underlying team activities and notify the Piping and Layout Lead of any anomalies.
- Supervise document updates following feedback from inter-discipline checks or external reviews (e.g., client, yards, third parties).
- Contribute to department improvements by sharing lessons learned during the project.
E - Construction and Start-Up

-Oversee material management on-site.
-Provide engineering support during the construction phase.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Draftsman executes the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A-Development Technology know how and Commercial support

B-Feasibility

C-Bidding phase/Commercial proposal development

D-Project Execution (Job progress and completion)

▪ Perform 2D drawings developed for electrical system design (single line diagrams, schemes and wiring diagrams)

▪ Perform 2D drawings developed for electrical system plant design (cable routings, grounding, lighting and tracing) and

substations arrangements

▪ Extract 2D drawings from the 3D model (cable routings and sections, grounding layouts, lighting layouts, etc.)

▪ Extract material quantities from the 3D model

▪ Implement electrical system installation details in 3D plant model (cable routings, supports, equipment)

▪ Participate to 3D modelling plant review

▪ Implement electrical load list and cables schedule in software tools

▪ Implement electrical materials take off (MTOs) in software tools

▪ Implement bill of quantities (BOQ) for electrical system installation in software tools

E-Construction and start up

▪ Review as built the technical documentation

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Designer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A - Development Technology know-how and Commercial support

B - Feasibility

C - Bidding phase/Commercial proposal development

▪ Prepare Instrumentation bulk material quantities (BOQs and MTOs) for cost and erection works estimates

▪ Support Discipline Lead to define man hours and cost estimates

D - Project Execution

▪ Review Client technical documentation and requirements

▪ Follow-up subcontracted engineering activities and control subcontracted engineering documents

▪ Apply engineering design basis and guidelines

▪ Prepare the technical documentation for Instrumentation bulk material requisitions and prepare, according to internal

procedures, the technical evaluations

▪ Provide technical support to Project Team

▪ Optimise Instrumentation bulk material design ensuring minimal cost and complexity in compliance with the contractual and

safety requirements

▪ Prepare Instrumentation bulk material technical specifications

▪ Prepare Instrumentation installation drawings

▪ Prepare Instrumentation BOQs and MTOs

▪ Perform Instrumentation 3D modelling design activities and participate to 3D Modelling reviews

E - Construction and start up

▪ Provide technical and engineering support to construction Team

▪ Perform site engineering activities during construction and commissioning phases.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

The Planning Manager responsibilities :

- To develop and maintain the company's overall Construction schedule.

- To develop, maintain and track the company's overall Material procurement, fabrication and delivery schedule.

- To develop, maintain and track the company's overall project and combined cash flow projections

About our client: Our client is a leading chemical manufacturing company that is expanding their exsiting operations in Singapore.

About the role: The Chemist is part of the pioneer team in the startup of the new production line, the Chemist is responsible for setup of QC Laboratory at new site, including management and training of Laboratory analyst, Laboratory system establishment and management to achieve safe and stable commissioning and startup of the new plant.

Work Location: Jurong Island (company transport is provided to and from Jurong East MRT station)

Responsibilities:

• Interpret laboratory results that are outside of the technical ability of the Lab Analysts.

• Review all process and final product test results to check for validity and possible quality-related issues.

• Assist quality lab manager in classification for final product and compounding lots.

• Assist quality lab manager to develop and implement QC specifications and standards.

• Assist quality lab manager to establish lab system according to HSEQ requirements.

• Conduct method development and validation, review and upkeep SOP of test procedures, calibration procedures and analytical instruments.

• Analyse, review and troubleshoot reliability issues of laboratory equipment and analysis problem and develop practical solutions.

• Liaise with vendors to troubleshoot and maintain laboratory equipment.

• Develop, implement, and follow calibration plan for equipment to ensure lab data is always accurate, consistent, and repeatable.

• Manage lab external agency audits and management systems certification compliance.

• Support Manufacturing, Quality, Sales, and Product Management functions.

• Assist lab manager, production, or other departments with special projects, as needed.

• Lead Special lab Projects and new grade trials.

• Implement and participate in safety and quality improvement activities.

• Evaluates reported results for consistency with plant process conditions.

• Trains laboratory personnel on new instruments and procedures as needed.

• Conduct internal audits on the proper execution of test methods.

• Liaise with Supplier, execute procurement process and receipt.

• Monitor and follow up on daily lab analysis result for accuracy and troubleshooting.

• Task as assigned by QC Manager.

About you:

• A bachelor's degree in chemistry or related field.

• Minimum 5 years’ experience in analytical lab with manufacturing facility

• Ability to work well under pressure in a fast-paced environment.

• Experience required in new Laboratory set up, system establishment.

• Experience required with GC, ICP, GC-MS, Antek, KF, IR, UV, Extruder, DSC etc.

• Experience required in statistical process control and statistical quality control.

• Experience preferred in polymer testing and analytical techniques.

• Extended knowledge of computers and software applications (i.e. Microsoft Office, spreadsheets, databases, NWA, etc.)

• SAP & LIMS experience preferred.

• Very strong oral and written communication skills

• Self-motivated and detail oriented

• Ability to multitask and prioritize work.

• Strong problem-solving, critical thinking and analytical skills.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About the role: Our client is a leading chemical manufacturing company that is expanding their existing operations in Singapore.

Work Location: Jurong Island (Company transport is provided to and from Jurong East MRT station)

About the role: The Day Technician is responsible for overseeing Heat Treatment daily operations, supporting the shift team with grade change maintenance activities, and ensuring smooth day shift operations.

Responsibilities:

• Manage the daily operations of the Heat Treatment unit, ensuring that quality, safety, and production capacity meet the production plan.
• Lead and support GCM transition activities for the HT facility, ensuring that cleaning tasks are completed efficiently and meet company standards before being handed over to maintenance.
• Communicate operational issues to the maintenance team and collaborate closely with maintenance contractors and coordinators to address them.
• Assist the shift team in various operational tasks, including off-spec PVA blending, chemical loading/unloading, chemical preparation, and GCM cleaning.
• Report to both the shift supervisor and day supervisor to ensure that daily operations are carried out safely and in compliance with requirements.
• Perform any other duties as assigned.

About you:

• NITEC or Diploma in Chemical Process Technology

• At least 3 years’ working experience as Process Technician in a chemical industry

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is in the Construction industry.

About the role:

• To interpret drawings and perform taking off duties
• To source sub-contractors and suppliers
• To prepare tender submission
• To liaise with sub-contractors and suppliers for quotation and procurement
• To coordinate with consultant and sub-contractor for progress claims, variation works and finalisation of accounts
• All other tasks as assigned by management

About you:

• Diploma in Quantity Surveying, Building, Construction Management related.
• Minimum 1-3 years relevant working experience in Quantity Surveying for renovation and A&A Works.
• Possess knowledge of local form of contracts (eg. PSSCOC, SIA etc)
• Proficient in MS Office applications.

Other information:

Work location: Woodlands

Working days: Monday to Friday (8.30am – 5.30pm)

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

About our client: Our client is a leading chemical manufacturing company that is expanding their existing operations in Singapore.

Work Location: Jurong Island (Company transport is provided to and from Jurong East MRT station)

About the role:

• To Coordinate maintenance activities between the Production and Technical departments and assist with GCM/SDM MA & MO activities.
• Support work permit and authorization processes.
• Attend daily operation and maintenance meetings to provide updates on progress and maintain alignment with planned activities.
• Oversee all maintenance tasks, including safe permit issuance, lockout-tagout preparation, GSAP approval, and assisting relevant teams to ensure successful completion of maintenance work.
• Prepare equipment for the transition from maintenance to commissioning, ensuring that all tasks are completed effectively.
• Support Capital Projects/MOC activities, ensuring that blanking, isolation, LOTO, and flushing procedures are followed for safe handling.
• Collaborate with Maintenance Engineers during the planning and commissioning stages of transition and turnaround activities.
• Prepare markup PIDs for all GCM activities during the transition period to ensure safe and timely start-up.
• Work with shift team supervisors to ensure maintenance tasks, such as cleaning, washing, and follow-up jobs by technical or in-house contractors, are completed before handing over to production.
• Assist with work permitting and work authorization activities.
• Perform other duties and assignments as directed by supervisors.

About you:

• Relevant experience in the chemical industry.
• Diploma or degree in a relevant field.
• A minimum of 2-3 years' experience in maintenance planning and coordination.
• Strong communication and teamwork skills.
• Ability to work independently and collaborate effectively with all levels of the organization.
• Proficient in MS Office applications (Word, PowerPoint, Excel).
• Strong time management skills with the ability to prioritize tasks effectively.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading chemical manufacturing company that is expanding their existing operations in Singapore.

About the role:

The Senior Lab Analyst is a key member of the pioneer team for the startup of the new production line, assisting the Chemist in setting up the QC Laboratory at the new site. This includes training Laboratory Analysts, establishing laboratory systems, and managing operations to ensure the safe and smooth commissioning and startup of the new plant.

Key Responsibilities:

• Conduct quality analysis on raw materials, intermediates, and final products.
• Accurately interpret and report test results in a timely manner, following specified test methods.
• Assist in troubleshooting technical issues related to equipment and analysis processes.
• Support the establishment and maintenance of lab systems, including equipment validation and calibration.
• Maintain quality documentation and develop quality procedures.
• Provide training to Laboratory Analysts and Process Technicians on analysis instrumentation procedures.
• Manage and maintain chemicals, reagents, and consumables.
• Assist in the procurement process and ensure inventory is up to date.
• Implement and optimize analytical processes and equipment workflows.
• Participate in safety and quality improvement initiatives.
• Perform other tasks as assigned by superiors.

About you:

• Diploma in Chemical Process Technology or Science related field.

• Min 5years experience in analytical laboratory environment.

• Hands-on experience with GC, ICP, Titration and polymer testing equipment.

• Hands-on experience with equipment calibration and reagent preparation.

• Ability to multi-task in a fast-paced environment.

• Strong analytical and problem-solving skills, detail oriented.

• Strong commitment to safety and quality.

• Ability to work without direct supervision.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is in the Construction industry.

About the role:

• Support the Tender Team by Interpreting Contract Drawings, Measurement of Quantities, preparing Bill of Quantities, Interpretation of Specifications and to Request for Information and Clarification.
• Source for Sub-Contractors/Suppliers, request for quotations, build-up tender base cost and to prepare tender proposal for Management review.
• Attend site briefing to compile all the documents required for tender submission.
• All other tasks as assigned by the Management.

About you:

• Diploma in Quantity Surveying, Building, Construction Management related.
• Minimum 1-3 years relevant working experience in Quantity Surveying for renovation and A&A Works.
• Possess knowledge of local form of contracts (eg. PSSCOC, SIA etc)
• Proficient in MS Office applications.

Other information:

Work location: Woodlands

Working days: Monday to Friday (8.30am – 5.30pm)

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

About our client: Our client is the in the oil&Gas industry.

About the role:

• Conduct and perform general equipment testing, maintenance, and repair work
• Execute tasks/activities, standard maintenance, and repair work such as Preventive, Corrective maintenance project executions at the site effectively & efficiently
• Ensure all site executions are performed in accordance with all maintenance work procedures / OEM manuals/company standards to ensure site quality, asset integrity and operability
• Ensure all site executions are performed in accordance with all Local Statutory and Company Safety processes to achieve good safety records/results
• Report any problems or issues with site facilities
• Process Permit-to-Work, Job Safety Analysis (JSA), Lock-out, Tag-out (LOTO) or execute the Defeat of Safety Critical Equipment (DOSCE) during associate maintenance activities
• Participate and contribute to maintenance documentation reviews such as Safe Work Procedures (SWP), Job Safety Analysis (JSA), and What-If Analysis
• Maintain work progress status and report to Supervisors on a daily or ad-hoc basis
• Perform Work Executor in the Computerized Maintenance Management System (CMMS) workflow to receive, update and close up assigned Work Orders and checklist
• Supervise contractors in work order execution and mentor, and guide technicians/junior technicians
• Support the Maintenance Supervisor in ensuring that contractors or third-party vendors execute maintenance tasks/activities at the site effectively and efficiently
• Ensure that contractors carry out tasks/activities that adhered to safety, health, and environmental regulations and company standards
• Assist Maintenance Supervisor/Engineer with Capex project execution
• Help out in the supervision of Capex project execution
• Perform equipment or system testing/commissioning / Inspections / Pre-Startup Safety Review (PSSR) to properly handover to the Operations team after maintenance/project completion
• Participate in routine safety drills, work orders, troubleshooting, and failure analysis
• Standby as duty technician for emergency activation to perform corrective maintenance after working hours
• Suggest and execute ideas for continuous improvement in maintenance procedures and processes to improve or optimize maintenance costs, work processes, and safety standards
• Assist to lead equipment training to the Operations dept or new trainees
• Maintain inventory and housekeeping
• Practice good housekeeping
• Assist to maintain spare parts inventory levels, support delivery checks by suppliers, and maintain good preservation/housekeeping in the store

About you:

• ITE or Diploma equivalent in maintenance
• 3 years of relevant maintenance experience in a similar industry
• Familiar with and experience in Maintenance and inspection work
• Familiar with and experience in terminal equipment and assets
• Technically sound
• Familiar with terminal equipment and assets
• Familiar with terminal fire-fighting and emergency procedures
• Knowledge of safety, health and environment regulatory and practices
• Compliance with regulatory requirements

Other:

• Work location: Jurong Island (transport provided at Jurong East)
• Work hours: Monday to Friday (8.30am to 5.30pm)

*Please note that only shortlisted candidates will be contacted.

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

About the role: Our client is a leading chemical manufacturing company that is expanding their existing operations in Singapore.

Work Location: Jurong Island (Company transport is provided to and from Jurong East MRT station).

About the role:

The Production Engineer (HSE) is responsible for overseeing daily operations and project safety, ensuring compliance with all safety regulations, and driving continuous safety improvements. This role involves managing risk assessments and ensuring occupational safety standards are met.

Responsibilities:

• Lead daily operations as an HSE Production Engineer, ensuring safety across both daily operations and construction projects at the site.
• Manage the HSE aspects of operations, including risk assessments, Hazop studies for new modifications, changes to operating procedures, and site construction activities.
• Review and identify high-risk activities in the process operations based on Hazop studies, and hold regular meetings with the production manager to develop plans for improving safety in these high-risk areas.
• Work closely with production and logistics teams to ensure safe work procedures are followed in the process operations.
• Review and prioritize safety observation feedback based on risk levels, following up through the MOC process. Ensure improvement actions are tracked with records and timelines.
• Collaborate with project engineers, production teams, and maintenance coordinators to ensure safety-related projects are executed and completed on time.
• Review emergency and disaster prevention procedures, ensuring they are up to date and aligned with current operations.
• Lead and drive any additional HSE improvement projects or activities.
• Perform any other tasks or duties as assigned by superiors.

About you:

• Experience working in the chemical industry
• In-depth understanding of safety legislation and regulations within the chemical sector
• Diploma or degree in Engineering, Health, Safety, or Environmental studies
• Proficient in Microsoft Office applications
• Strong written and verbal communication skills
• Excellent organizational abilities
• Strong analytical skills with the capacity for critical thinking

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Main responsibilities:

• Meet potential clients with Business Development Managers to enquire and understand clients’ needs
• Work closely with project and operation teams and sub-contractors to ensure timely delivery of the project and excellent quality of work done
• Be the point of contact between the company and clients, obtain client’s feedback and resolve project related issues such as payments, etc.
• Arrange submission of plans to relevant authorities for approval and arrange inspections of building work
• Co-ordinate layout plan, M&E plan and visuals, prepare project schedule and quotations to clients and submit tenders for the project to clients
• Provide technical advice to ensure M&E installation comply with construction drawing and relevant authorities’ requirement and check on cost estimation.
• Assist to monitor on M&E installation services such as ACMV, AVS system, Electrical, Plumbing and installation progress.
• Attend M&E coordination meeting for safety & finishing work

Requirements

• Min 2-5 years’ experience in corporate office interior design & build project management. M&E knowledge and experience are a must. Applicants with PMP Certification have an added advantage.
• Recognized qualification in Interior Design, Architecture, Mechanical/Electrical Engineering or equivalent
• Able to interpret architectural plans and familiar with building and safety regulations
• Experience in leading and managing multiple projects within tight timelines
• Excellent project, presentation, leadership and people management skills
• Highly self-motivated, positive working attitude with a high level of professionalism and integrity
• Good communication and interpersonal skills

Job Descriptions:

To work with customer to identify and verify the scope of work

To work with customer or customer’s site project manager to develop project schedule

To work with project installation team to develop project installation schedule

To plan weekly work schedule with scheduler for the installation team

To work with project installation team to complete the weekly project monitoring report

To ensure timely progressive monthly project billing

To ensure that work site safety regulations are being enforced

To provide and monitor scope of work on project variation work for salesperson

Ability to work under pressure and resolve problem independently

Job Requirements:

Candidate must possess at least Professional Certificate/Nitec, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical/Electronic), Engineering (Mechanical), Computer Science/Information Technology or equivalent.

At least 2 Year(s) of working experience in the related field is required for this position.

Preferably Junior Executive specialized in Engineering - Electronics/Communication or equivale

Job Description

Self-motivated with a results-driven approach

Responsibilities

Successful candidate shall assist Sales Manager in

• Prospect for new client and develop new accounts
• Prepare and deliver appropriate presentations on products and services
• Prepare quotations and analysis report
• Will require to meet clients at their office or sites if needed
• Negotiating deals and maintaining customer satisfaction.
• Excellent communication skills
• Self-motivated with a results-driven approach
• Attractive commission scheme

Requirements

• ITE / Diploma / Degree from a reputable institute
• Proven experience as a Sales Executive or relevant role
• Fast learner and passion for sales
• Proficiency in English

Incentivities

• Innovative Commission Scheme
• Overseas Incentive Trips

-Cold calling and generate appointments. (B2B)

- Confidently present to decision makers.

- Develop, build, and manage a client base of corporate accounts.

- Target new and existing corporate accounts.

- Prepare and deliver presentations demonstrating Company products and services.

- Successful on-boarding of new clients.

- Achieve monthly sales target and maintain good relationship with clients.

- Process order transactions including quotation, customers’ records updates and correspondence.

- Provide minor administrative support to the sales team and other relevant departments.

Requirements:

- Working experience in related field, preferably 4 years of B2B sales experience.

- Ambitious, performance-oriented and sales-driven individual that fancies being remunerated generously through sheer hard-work and effort.

- Independent, hardworking and highly responsible individual with a great sense of responsibility.

- Passionate and driven with strong ability to self-motivate.

High Commissions, fulfill KPI may have min allowance $600-$800

Freelancers are welcome too