School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research.

With over 3,000 undergraduates students and 1,000 graduate students it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.

For more details, please view: https://www.ntu.edu.sg/eee

We are seeking a motivated and skilled Project Officer to contribute to the design and simulation of high-efficiency DC-DC converters and RF power amplifiers.

This role involves working on innovative solutions in the field of analog/RF/power management IC.

Key Responsibilities:

• Development of teaching materials for IC design
• Design, implementation and testing of DC DC converters and other related analog/mixed signal ICs. Development cycle including circuit design, simulation, modeling, layout, verification and measurements.
• Design state of the art DC DC converters that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, switching power stage, etc
• Design of high power-efficiency RF power amplifiers
• Prepare research papers/reports/technology disclosures, etc

Job Requirements:

• Bachelor’s degree in IC design or related field.
• At least 2 years of relevant experiences in IC design/Electronics.
• Familiarity with Analog/Power Management/RF IC design and Cadence software.
• Good written and oral communication skills.
• Proficiency in Cadence, Python or Matlab.
• Ability to work independently and deliver solutions within strict timelines.
• Attention to detail, with excellent organizational and time management skills.
• Entry level candidates are welcome to apply.

We regret to inform that only shortlisted candidates will be notified.

Project Design & Engineering Calculations and Proposal drawings to Client.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as Equipment sample or Site measurement studies

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Schedule the project in logical steps and budget time required to meet deadlines.

Site & office project management and daily operations including Engineering Design, Drawing and Fabrication, inspections, site measurements and handover to client’s.

Attend Site meeting, Equipment rectification in assembly and dismantling when required.

Overall project planning, scheduling, monitoring, and updating to meet project completion targets.

Liaison and meeting with client's representatives, relevant authorities, and consultants.

Site co-ordination, monitoring and report work progress.

Flair in design; able to sketch fast and produce good design concept

Coordinate all new and current on-going projects and able to communicate well with all levels

Review M&E Design Drawings and ensure compliance with design specifications and guidelines. Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Review incoming engineering, ISO piping drawings and assess impact of extra work or changes on schedule.

Ensure all regulatory and statutory requirements regarding testing and record keeping are met.

Supervise and coordinate M&E and Mechanical piping/equipment installation in accordance with approved drawings and materials. Coordinate M&E details with Clients, Consultants, Sub-contractors and other site staffs.

Monitor performance of multi-skilled craft workers in the installation, removal, or adjustment of equipment or components in accordance with established project procedures, requirements and specifications.

Monitor construction schedules, methods, manning charts, materials and equipment requirements.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Supervise electrical and instrumentation construction work as per IFC drawings.

Monitor construction schedules, methods, manning charts, material and equipment requirements.

Monitor the activities of contractors and subcontractors performing craftwork, ensuring compliance with project quality, safety, and security requirements.

Min 5-7 years’ of experience in Engineering related activities in Mfg, Recycle, Oil & Gas and Chemical plant industry.

Responsible for safety of supervised personnel; ensures that craft personnel comply with established safety policies and procedures, and that they practice safe work habits.

Applicable only for Singaporeans / PR's

Job Responsibilities:

• Work closely with project sponsors, stakeholders, and team members to ensure that all project requirements, deadlines, and schedules are on track.
• Documentation management and ability to use project management tools.
• Taking meeting minutes.
• Assist in co-ordination of all project activities and submission as required.
• Keep proper records and maintain all administrative correspondences and documents relating to projects in good order.
• Preparing material submission, system technical data submission as per project requirements.
• To assist to generate to monitor project progress and schedules.
• Manage changes to the project scope, project schedule using appropriate verification techniques.
• Project planning and mangement.
• To advise best practice information management practices and documentation processes.

Job Requirements:

• Qualification: O level, A Level, ITE or equivalent
• Years of experience: At least 3 years of Project Management or equivalent experience in related field (Construction)
• Skills: Capable to converse in English, Mandarin or local dialect. Proficient in MS Office, MS Project and documentation. Good communication and interpersonal skills. Capable of maintaining strong relationships. Attention to details under pressure and time management skills with the ability to meet deadlines.

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.

1. Duty & Responsibilities

• Implement and provide directions in project planning, coordinate works, liaise with sub con/supplier, ensures overall progresses based on schedules.
• Effectively communicate project expectations to team members and stakeholders.
• Coordinate with the drafting department with regards to the preparation/ submission/ approval of shop and as-built drawings.
• Liaise with client's representatives with regards to all site matters, attend site meeting if required.
• Update Project Status, prepare monthly progress claim for the project.
• Develop best practices and tools for project execution and management.
• Performed Ad-hoc duties assigned.

2. Requirement

• Min. 5 years and above for Electrical & Network Telecommunication Project Management experience required.
• Bachelor/ Master Degree in Electrical/ Electrical Communication Engineering or relevant field.
• Proven experience in leading build projects from initiation to project closure
• PMP certification from PMI or equivalent is an advantage.

Goldwind Services Pte Ltd

Construction Project Manager

· Responsible for facilitating project development and progress from initiation to completion.

· Experienced in project design and planning, collaboration and coordination with designated teams, and delivery of results within deadlines and budget constraints.

· Responsible for oversight of team members, setting deadlines, designating assignments, and monitoring every stage of project progress.

· Skilled in tracking progress, summarizing results, and communicating with management, clients, and other stakeholders.

· Coordinate and lead planning sessions for project development and execution

· Manage staffing and other resource needs to maximize potential for successful execution of projects

· Define project objectives and scope, identifying involvement of internal and external stakeholders

· Conduct risk analysis to reduce unforeseen obstacles and costs

· Create detailed schedule, project parameters, and budget expectations

· Conduct periodic scope, schedule, and cost reviews using industry best practices, to identify needed adjustments

· Measure project performance and progress throughout campaign execution

· Manage client and other stakeholder expectations to maintain productive and engaged relationships

· Document project activities, obstacles, costs, and results

· Delegate project activities and duties in accordance with team members' strengths and experience

· Provide summarized project plan documentation to departmental managers, clients, and other stakeholders as needed

· Engage in continual learning to remain abreast of industry best practices, new technologies, and emerging standards

· Collaborate with and lead teams to deliver results on schedule and within budget limits

· Execute other role duties as assigned

The School of Materials Science and Engineering (MSE) provides a vibrant and nurturing environment for staff and students to carry out inter-disciplinary research in key areas such as Computational Materials Science, Characterisation Materials Science, Defence Composite Materials, Functional Composite Materials, Energy, Nanomaterials, Low Dimensional Materials, Biomaterials Materials, Biological Materials, Bioinspired Materials and Sustainable Materials.

For more details, please view https://www.ntu.edu.sg/mse/research.

We are seeking a highly motivated Project Officer to join our dynamic team at the School of Materials and Science Engineering at Nanyang Technological University, Singapore. We are looking to hire a scientist with expertise in encapsulation including the use of spray-dryers and other techniques. Some experience in materials science and engineering would be ideal. The successful candidate will contribute to cutting-edge research at the intersection of materials science, advanced manufacturing, robotics, and sensing.

Key Responsibilities:

• To identify soluble components in Traditional Chinese Medicine (TCM) for characterization.
• To develop and formulate encapsulation systems for the delivery of TCM to gastric and intestinal regions of humans / animals.

Job Requirements:

• Bachelors qualification with relevant research experience.
• This is an industry-sponsored project.
• Job position is available only for six months.

We regret that only shortlisted candidates will be notified.

1. Duty & Responsibilities

• Implement and provide directions in project planning, coordinate works, liaise with sub con/supplier, ensures overall progresses based on schedules.
• Effectively communicate project expectations to team members and stakeholders.
• Coordinate with the drafting department with regards to the preparation/ submission/ approval of shop and as-built drawings.
• Liaise with client's representatives with regards to all site matters, attend site meeting if required.
• Update Project Status, prepare monthly progress claim for the project.
• Develop best practices and tools for project execution and management.
• Performed Ad-hoc duties assigned.

2. Requirement

• Min. 8 years and above for Electrical & Network Telecommunication Project Management experience required.
• Bachelor/ Master Degree in Electrical/ Electrical Communication Engineering or relevant field.
• Proven experience in leading build projects from initiation to project closure
• PMP certification from PMI or equivalent is an advantage.

Responsibilities:

• To provide engineering support to the Project team from validation phase to project implementation

• To identify type of material and equipment requirement during validation phase.

• To involve in preparation and submission of engineering submittals.

• Programming of devices & creating and programming graphics in accordance with the project requirement.

• To assist in Test and Commissioning of system equipment.

• To assist in preparation and submission of operation and Maintenance Manuals.

• To provide Bill of Quantity for the projects.

• Any other duties as assigned by superior

• Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements:

• Diploma/ Degree in Engineering or Building Control in relevant field

• Min 1-2 years of relevant work experience

• Experience in PLC programming is added advantage

• Experience in handling energy management systems/ HVAC systems/ Chiller Plant systems/ Building Management Systems will be a plus

• Knowledge of IT networking and database programming, Function Block programming, Structured Language Programming or HTML5 programming will be of added advantage

• Knowledge of industrial system protocols like BACnet, Modbus, LONTalk

• Strong customer management and problem solving skills

• Able to work with the team and self-motivated

Major Duties & Responsibilities:

• Coordinate building maintenance project works.
• Plan and discuss with sub-contractors on project execution including implementation.
• Manage and supervise project works as well as oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• Execute project works based on the drawing / specification.
• Resolve any Clients and / or residents’ complaints / feedbacks.
• Liaise and co-ordinate with Clients, Consultants and Vendors on all project matters.
• Attend site meetings.
• Track work progress and submit progress report so as to ensure that the projects are executed on time and within budget.
• Coordinate the project work to ensure successful completion as well as hand over to the Clients.
• Maintain all the documentation for the projects.
• Coordinate and work with other departments as well as to supervise the project works.
• Follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Building / Certificate in Civil & Structural Engineering or related field.
• Job holder without the above qualification but with relevant experience would be considered.

(B) Knowledge & Skills :

• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office (MS Word, MS Excel and MS Project)
• Positive and good working attitude, self-motivated and able to work independently.
• A good team player and willing to be stationed at the site office.
• Possess a Singapore Class 3 driving license.

(C) Experience :

• Preferably 4 years working experience in Building Construction Industry.

As a Project Manager, you will manage and oversee all aspects of a project to ensure it is completed on-time and within budget. You are responsible for managing scope, cost, schedule, internal staffing and outside vendors. You will prepare reports for upper management regarding status of project as well as contribute to moderately complex aspects of a project. Your work is generally independent and collaborative in nature.

Responsibilities:

• Directs and manages large and complex project development from beginning to end
• Defines project scope, goals and deliverables to support business goals in collaboration with senior management and stakeholders
• Develops full-scale project plans and associated communications documents
• Communicates project expectations to team members and stakeholders
• Liaise with project stakeholders on an on-going basis
• Estimates resources and participants needed to achieve project goals
• Develops employees to be self-sufficient in continuous improvement tools
• Functions as leader for continuous improvement events
• Aligns activities with corporate goals around safety, quality, delivery and cost
• Performs root cause analysis on gaps, identifies waste, and works with leadership to drive sustainable corrective action
• Drafts and submits budget proposals, and recommends subsequent budget changes
• Negotiates with other department managers for acquisition of required personnel
• Determines and assesses need for additional staff or consultants and makes appropriate staffing adjustments during project cycle
• Sets and manages project expectations with team members and other stakeholders
• Delegates tasks and responsibilities to personnel
• Identifies and resolves issues and conflicts within project team
• Identifies and manages project dependencies and critical path
• Plans and schedules project timelines and milestones using appropriate tools
• Tracks project milestones and deliverables
• Develops and delivers progress reports, proposals, requirements documentation, and presentations
• Manages changes in project scope, identifies potential concerns, and devises contingency plans

Qualifications:

• Associate’s degree required; Bachelor’s degree preferred
• 5 years required, 7 years experience preferred of directing work in a large-scale project management capacity, including all aspects of process development and execution
• Business and management principles, including strategic planning, resource allocation, and production methods
• Prior experience with managing people and processes to achieve objectives
• Ability to build effective business relationships with other functional areas to best support mutual objectives
• Excellent problem-solving skills and ability to analyze workflow and processes to provide productive service to internal and external customers
• Interpersonal, conflict management, and negotiation skills required, including strong human relations skills to supervise and develop assigned employees effectively
• Adept at conducting research into project-related issues and products
• Ability to learn, understand, and apply new technologies
• Ability to effectively prioritize and execute tasks
• Effective written and verbal communication skills
• Excellent computer skills

Responsibilities:

*Access power and instrument control signals for production equipment.

*work on the line from the substation to the process equipment,

*installation and commissioning of transformers and switchgear, the construction of cable lines, and the power supply and commissioning of equipment;

*work on the bus path from the instrument central control room (CCR) to the equipment including the installation and commissioning of control cabinets,

* installation of cable paths, the power supply of process equipment, and process interlocking commissioning

*· Manage construction activities and progress independently.

Requirements

*· Able to complete above responsibilities indepandently.

*· Degree in Electrical engineering or diploma holder with minimum 5 years of relevant experience.

*· Technically competent across the full range of electrical systems

*· Good interpersonal and communication skills to interact with all level of staff.

Addcel are looking for Senior Project Engineer who has experience in Project Implementation for Mechanical works especially Piping, Structural Steel and Tankage works. Follow through the whole project lifecycle from estimation, tendering, detail engineering to project management and implementation.

Responsibilities:

• Estimation and MTO
• Tendering & Proposal
• Value and Detailed Engineering
• Drafting using AutoCAD
• Project Planning, Documentation and Support
• Capture project progress and additional/ change orders
• Others as and when required by the management.

Requirement:

• Min. 2 - 5 years of relevant working experiences
• Min. Degree in engineering or equivalent
• Excellent skill in MS Office

Responsibilities:

• Lead full spectrum of Project Management including Overall Procurement, Construction, Manpower Planning, Testing and Commissioning.
• Involve work force arrangement for Plumbing, Sanitary , Gas and Precast yard services.
• Budget and Cost Control.
• Preparation of Progress Claims.
• Coordination and liaison with Clients, Consultants, Architect, Authorities, Project teams, Sub-contractors and Suppliers.
• Daily Operations for all the projects and maintenance.
• Prepare Agenda, Follow up agenda.
• Whole In Charge of Procurement, HR and Safety Department
• Able to prepare full set of Accounts and liaise with the Auditor.

Requirements

• Degree / Diploma.
• Min 5 years of relevant work experience in similar capacity in Plumbing & Sanitary Services.
• Highly motivated and possess strong leadership qualities and the ability to work independently in a challenging environment.
• Able to communicate effectively at all levels.
• Able to liaise with mandarin speaking sub contractors.
• 6 Days work

• Assist Project Manager in the coordination work and any other work in relation to the project.
• Prepare CAD drawing (cutting list, as-built drawing), Work Orders.
• Knowledge on rendering, 3D drawing will be advantageous.
• Cross check the material quality prior to production team's fabrication.
• Work with production team to ensure the production output are in line with the project schedule.
• Team player as well as able to work independently
• Able to work in a fast paced environment
• Meticulous and resourceful.

The Foundations of Thermodynamics Group is a newly formed group in the School of Humanities at the Nanyang Technological University Singapore led by Nanyang Assistant Professor of Philosophy Eugene Y. S. Chua. It provides a space for research on all aspects of the conceptual foundations of thermodynamics, with particular focus on understanding the conceptual foundations of thermodynamics beyond the classical domain, e.g., in the quantum and relativistic domains, or how thermodynamics relates to other non-fundamental domains such as fluid dynamics and neuroscience.

The group is seeking a skilled and detail-oriented Project Officer to oversee the management and administration of the group’s day-to-day activities. The successful candidate will be responsible for ensuring the smooth coordination of project activities, managing budgets and project finances, monitoring progress, and ensuring compliance with grant requirements. This role requires excellent organizational and communication skills, as well as the ability to work collaboratively with researchers, stakeholders, and funding bodies.

Key Responsibilities:

• Managing the day-to-day operations of the group’s grant
• Developing and maintaining project documentation, including work plans, progress reports, and budgets.
• Monitoring project expenditures to ensure compliance with grant guidelines
• Processing claims and expenditures in accordance with university guidelines
• Liaising with funding bodies, researchers, and collaborators on group matters
• Tracking project milestones and deliverables, ensuring timely completion and reporting
• Organizing meetings, workshops, and events related to the project.
• Assisting in preparing funding reports, renewal applications, and project evaluations.

Job Requirements:

• Bachelor degree in philosophy or equivalent professional experience in project management.
• Experience managing grant-funded projects or research initiatives.
• Strong organizational and problem-solving skills, with an ability to manage multiple priorities.
• Proficiency in project management tools and software.
• Excellent written and verbal communication skills.
• Familiarity with financial reporting and budget management.
• Attention to detail and ability to work independently.
• Knowledge of philosophy and physics is a plus.

We regret to inform that only shortlisted candidates will be notified.

The responsibilities shall include, but are not limited to, those contained in the following statements:

1. direct liaison with stakeholders in charge of project services (procurement/ draughting/ assets/ human resources);

2. specify scope of work and budgets for engineering activities, assets and 3rd party activities;

3. to be conversant with all items and conditions of the project both technically and commercially and to have a full understanding of the scope of work;

4. implementation, control and monitoring of overall safety and quality assurance in all project related activities as laid down in the company’s management system;

5. preparation and maintenance of budgets for the project assisted by the cost controller

6. preparation of the monthly reporting internal & external;

7. ensuring variations between actual costs and budget are monitored and controlled;

8. identifying and initiating any variations towards the client or approve/ reject variations from third parties on the basis of the contract T&C’s;

9. liaise with the client and ensure that project meetings are held with relevant personnel;

10. establishing all the resources from company’s departments needed to carry out the project.

11. encourage any technical developments or suggestions that will enhance the overall project engineering or operational efficiency;

12. ensure that all aspects of project administration, engineering and operations fulfil the contract requirements and are conducted in a safe, efficient and profitable manner;

13. conduct all activities within the management system, procedures and work instructions;

14. advise and assist commercial department with tenders for potential work;

15. ad-hoc duties as deemed required to complete the workscope.

Roles and Responsibilities

· Determines project schedule by studying project plan and specifications, time requirements; sequencing project elements.

· Project costs management by expenditures; contracts terms and conditions

· Progress payment submitted by the contractors/ suppliers

· Check and analyse project/ building cost versus budget

· Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommends actions.

· Group finance system implementation

· Any other duties assigned from time to time.

Job Requirements

· Bachelor's Degree/ Diploma in Finance with 3 - 5 years related work experience in construction/ building/ project work sector

· Meticulous, well organised, able to work independently and problem-solving skills.

· Team oriented, deadline driven and with a sense of responsibility

· Project management, Microsoft Office (eg. Excel and WORD)

· Good communication and interpersonal skills

· Self-initiative individual who is able to multi-task and work in a fast-pace environment

· Identify, troubleshoot, and resolve day-to-day and moderately complex issues.

The School of Materials Science and Engineering (MSE) at Nanyang Technological Universityis (NTU) looking for a highly motivated candidate to join us as Project Officer to facilitate the research led by Nanyang Assistant Professor Yi-Sheng (Eason) Chen.

Key Responsibilities:

• Support the delivery of project goals
• Conduct high-quality research and disseminate outcomes in peer-reviewed journals and academic conferences
• Participate in supervising undergraduate and postgraduate researchers
• Collaborate with local/overseas research groups
• Establish one or more independent research programmes under the guidance of PI and other senior mentors
• Develop competitive funding proposals in collaboration with PI and other senior colleagues
• Engage in teaching undergraduate and graduate courses and contribute to curriculum development and pedagogical innovation
• Contribute to the development of international and local research communities
• Support the operation of PI's research group, including recuitment and external engagement
• Engage in developing and mainting a safe and inclusive work environment

Job Requirements:

• Bachelors in Materials Science or related fields
• Excellent proven track records in the development of advanced alloys and their applications in energy conversion
• Excellent communication skills and the ability to transmit research results into published research outcomes.
• Ability to work independently and to communicate effectively with team members
• Ability to work effectively under pressure to meet research deadlines
• Ability to work collaboratively with academic and industry partners
• Sound working knowledge and acute awareness of safety regulations and operating procedures within the laboratory environment.

We regret that only shortlisted candidates will be notified.

Key Responsibilities

Lead-to-Quote Process Governance:

• Govern the Lead-to-Quote process and ensure that it is standardized / implemented within the Group across all users of MS Dynamics.

Regional champions and market rollout:

• Act as an advocate for Microsoft Dynamics CRM, promoting its benefits and ensuring users understand how it can improve their productivity and workflow.
• Plan, coordinate, and execute CRM rollouts across multiple countries / legal entities, managing timelines, milestones, and stakeholders.
• Act as regional / legal entity champions, managing relationships with local teams to increase adoption of CRM system, foster alignment to global Standards while facilitating platform support requests.

Training and change management:

• Orchestrate training, support and implement feedback from end-users to maximize the user adoption and efficacy of the CRM system.
• Regularly communicate new features, updates, and tips for using the CRM system to maximize its value
• Build and nurture a community of CRM users in the responsible regions / LEs, encouraging the exchange of best practices and tips for efficient system usage.
• Collect and share user feedback to improve the CRM system and the user experience.

CRM Development and Continuous Improvement:

• Collaborate closely with platform operations team to deliver system enhancements and bug fixes to optimize the CRM platform for end users. Actively participate in gathering requirements, designing solutions and final testing and technical acceptance

Key Requirements

• Bachelor’s degree in Business Administration, Sales or a related field. Relevant certifications (e.g., Microsoft Certified: Dynamics 365) are a plus.
• 3–5 years of experience in Technical Project management or Sales operations related role.
• Experience working with Microsoft Dynamics 365 CRM or a similar CRM system is advantageous.
• Experience with lead-to-quote process governance and CRM systems implementation is advantageous.
• Strong project management skills with the ability to prioritize and multitask in a global setting.
• Excellent communication, facilitation, and interpersonal skills to engage stakeholders and lead training sessions.
• Strong problem-solving and troubleshooting skills for CRM-related issues

Business Development Manager Job brief

We are looking for an ambitious and energetic Business Development Manager to help us expand our clientele. You will be the front of the company and will have the dedication to create and apply an effective sales strategy.

The goal is to drive sustainable financial growth through boosting sales and forging strong relationships with clients.

Business Development Manager Responsibilities

• Develop a growth strategy focused both on financial gain and customer satisfaction
• Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines
• Keep records of sales, revenue, invoices etc.
• Provide trustworthy feedback and after-sales support
• Build long-term relationships with new and existing customers
• Develop entry level staff into valuable salespeople

· Developing goals for the development team and business growth and ensuring they are met.

· Training personnel and helping team members develop their skills.

• Finding and developing new markets and improving sales.
• Perform any other duties assigned by the director.

Business Development Manager Requirements and skills

• Proven working experience as a business development manager, sales executive or a relevant role
• Proven sales track record
• Experience in customer support is a plus
• Proficiency in MS Office and CRM software (e.g. Salesforce)
• Proficiency in English
• Market knowledge
• Communication and negotiation skills
• Ability to build rapport
• Time management and planning skills
• BSc/BA in business administration, sales or relevant field
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Job Responsibilities:

1. Maintain good relationships with customers and handle their request and expectation effectively.
2. Work with internal team (Project Management Team,Customer Service Team, Engineering Team) for customers’ RFQs.
3. Compile and update internal sales progress to Manager.
4. Ensure customer order demand is achieved.
5. Meet the target given for assigned/new customer account.
6. Seek for new customers for business growth in Medical & Automotive Industry.

Job Requirements:

1. 3-5yrs relevant experiences.
2. Mechanical/Tooling/Injection molding/Manufacturing knowledge.
3. Good communication (written and oral) and interpersonal skill. Able to communicate with all levels.
4. Multi-tasking and good time management skill.

Summary

The Business Support Executive is responsible to provide high-quality customer support through processing orders to shipment and delivery of orders. The Executive is also responsible for managing external customers and factories, coordinating with internal colleagues. This role also involves answering calls or emails from customers, participating in meetings with the factories and Sales.

Responsibilities

• Attend to pre-sales enquiries on product availability, lead time and price.
• Initiate and follow up on new item creation/customer creation in the system.
• Customer PO and contract review, including but not limited to the price and cost analysis, contract clause, and credit.
• Ensure price and credit have been approved before entering the ERP system.
• PO operation based on the sales order demand, track with vendors not only the inter-company vendor but the 3rd party about the schedule to meet customer’s demand.
• Daily order tracking & updating to ensure project schedule is under control.
• The shipment arrangement includes getting items from vendor and schedule pickup from customer.
• Follow-up on payment and forwarder details with customers and the factory.
• Review LC draft, prepare and collate documents from various factories for LC presentation.
• Coordinate with related parties on product quality issues.
• Communicate and provide timely responses between customer, sales, operation and factory.
• Generate and update sales order backlog reports to the sales & customer for update.
• Weekly & monthly sales & order forecast collection and summary.
• Support request from management e on reports from management’s request.
• Support manager to monitor the execution process of commercial contracts to conform to the company compliance & policy.
• Any other tasks assigned by manager.

Requirements

• Minimum Diploma or equivalent with experience in Customer Service support for at least 3 years.
• Work experience in import/export business, order fulfilment and management or purchasing function is desired.
• Responsible and reliable with integrity, highly adaptable and a great sense of teamwork.
• Willingness to learn new skills and open to development, willing to work extra hours if required.
• Proficient in Microsoft Office & ERP systems, analytical and sensitive to numbers.
• Good interpersonal and communication skills.
• Strong sense of urgency and self-motivation.
• Customer-focused, clear thinker and team player.

Responsibilities:

Project Planning & Coordination

• Collaborate with project managers to define project scope, goals, and deliverables.
• Develop detailed project plans, including timelines, budgets, and resource allocation.
• Coordinate with internal teams and external stakeholders to align on project requirements.

Technical Oversight

• Review and interpret technical drawings, specifications and contracts.
• Provide engineering solutions to technical challenges and ensure compliance with industry standards.
• Oversee procurement and ensure materials meet project specifications.

Take-Off and Budget Management

• Prepare accurate Bills of Quantities (BQ) and cost estimates for projects.
• Conduct quantity take-offs from technical drawings and specifications.
• Monitor project costs, manage budgets and implement cost control measures to minimize overruns.

Tendering Assistance

• Support the tendering process by preparing bid documents, reviewing contractor bids, and evaluating technical and financial submissions.
• Assist in drafting and reviewing contracts and agreements.
• Work closely with procurement teams to ensure alignment with project goals and timelines.

Project Execution

• Monitor project progress, ensuring adherence to quality standards, timelines, and budgets.
• Manage changes to the project scope, schedule, and costs through appropriate processes.
• Conduct site visits to oversee construction, installations, or implementations as required.

Communication & Reporting

• Act as the point of contact between clients, contractors, and other stakeholders.
• Prepare and present regular progress reports, technical updates, and cost analyses.
• Address and resolve project-related issues and conflicts.

Risk Management

• Identify potential project risks and develop mitigation plans.
• Ensure safety protocols and compliance with environmental regulations.

Requirements:

• Bachelor’s degree in Engineering (Civil, Mechanical, Electrical, or related field).
• Preferable 3 years experience in project management or engineering roles in oil and gas industry.
• Strong knowledge of engineering principles, budget control, and tendering processes.
• Excellent communication, problem-solving and leadership skills.
• Proficiency in project management software (e.g., MS Project, Primavera), Excel Worksheet, Word Document, Power Point Presentation, AutoCAD, cost estimation tools and BQ preparation software.
• Experience in tender evaluation and contract management.
• Strong organizational and multitasking abilities.
• Wiling to work at project sites and may require extended hours to meet deadlines.
• This role is well-suited for a detail-oriented professional with expertise in project costing, budget management, and tendering who is passionate about engineering project delivery.

Job Description

• Oversee Projects Department daily operations. Collaborates with stakeholders to document project scope, deliverables, goals, risks, blockers, success measures, and estimated resources needed.
• Responsible for successful completion of all projects. Ensure that projects remain in-scope and meet budgetary, scheduling, and quality requirements.
• Coordinate with Sales, Structural Design and Procurement Department in all project matters.
• Ensure timely delivery of project with satisfactory quality.
• Assist management in contractual and commercial matters in Projects.
• Assist management in cost minimization & profit maximization.
• Promotes a culture of teamwork, collaboration and success.
• Ensure preparation of Project Execution Plan, Project Scope of Work, Project Setup, Project Closeout and Variation Orders.
• Ensure clear and open communication with project team members and between project team and functional groups, the changes in scope of work and schedule are captured in the Variation Orders and the implementation of lessons learned.
• Manages the project team, internal and external customer relationships, and staffing of project team with competent persons from the functional groups. Communicates routinely to management, customers, project team members, actively soliciting and addressing customer and project team feedback.
• Manages the cost, schedule, safety, quality, and contractual requirements of the project through effective planning in accordance with company procedures.
• Applies basic understanding of company's business to improve project cost effectiveness, apply change management principles and improve project margin.
• Provide status updates regularly to management.
• Assist in business development efforts to create project proposal, estimates and schedules etc.
• Responsible for training, managing, and motivating the project team, as well as resolving team conflicts.
• Resolves technical and operational issues as required.
• Plan, schedule, monitor, and report on activities related to the project, including subcontractor monitoring.

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 5 years of working experience in similar industry, including tracking and planning projects
• Good written and spoken English (written, verbal and presentation) and interpersonal skills
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Strong leadership, diplomatic and motivational skills, with the ability to adapt change and competing demands
• Able to plan and manage project assigned independently
• A problem solver and a team player
• Experience in leading, motivating and managing various project and team sizes
• Intermediate level of proficiency with MS Project, Excel, PowerPoint and SharePoint