*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer executes the activities within the area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A-Development Technology know-how and Commercial support

▪ Provide technical support

B-Feasibility

▪ Provide technical support

C-Bidding phase/Commercial proposal development

▪ Analyse and understand Tender documentation

▪ Take part in electrical system design review

▪ Identify technical queries, deviations an d alternatives to be submitted

▪ Implement bidding methodologies, design criteria and guidelines

▪ Define and issue request for quotation for items not estimated in house

▪ Coordinate material quantities and weights (MTOs) estimation

▪ Prepare bill of quantities for erection works cost estimation

▪ Support Electrical Lead to define manhours estimation

D-Project Execution (Job progress and completion)

▪ Review Client technical documentation and requirements

▪ Take part in definition of electrical engineering requirements

▪ Prepare Project design criteria for electrical system

▪ Define the configuration of the electrical system and the single line diagram

▪ Perform electrical system calculation and studies (e.g. power demand, load flow, short circuit, transient stability, motor starting) to define the equipment rating

▪ Prepare relay and metering schemes, protective relays coordination study and setting tables

▪ Define the functional philosophies for the electrical system control (power management, synchronization, load shedding, reacceleration and restarting) and control system architecture

▪ Prepare technical documentation (e.g. specifications, data sheets) for electrical equipment and materials

▪ Check and review technical documentation according to Project and client procedures

▪ Prepare Purchase Requisitions and bids technical evaluation

▪ Perform check and review of Vendor technical documentation

▪ Provide technical support to Procurement in purchasing and to Post order in expediting and testing

▪ Develop electrical system plant design (e.g. cable routings, grounding) and substations arrangements

▪ Perform power cables sizing

▪ Define typical installation details, bulk materials selection and take off (MTOs)

▪ Define bill of quantities and prepare technical documentation for electrical system installation

▪ Define technical procedure for electrical system testing and energization E-Construction and start up

▪ Support Construction for electrical system installation works and bulk materials management

▪ Assist, when necessary, engineering adjustment and define modifications

▪ Revise as built the technical documentation

▪ Support Commissioning for electrical system testing and energization

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

A. Development of Technology Knowledge and Commercial Support

B. Feasibility
Provide technical support to other project roles for specialist aspects.
C. Bidding Phase/Commercial Proposal
- Analyze and understand tender documentation.

- Define the discipline's activity and deliverable lists and coordinate activities per the project schedule.
- Identify technical queries, deviations, and proposed alternatives.
- Implement bidding methodologies, design criteria, and guidelines.
- Define and issue RFQs for externally sourced items.
- Coordinate material quantities and weight estimation.
- Prepare engineering manhour and material cost estimates.
- Support the Proposal Manager during client technical clarification meetings.

D. Project Execution
- Ensure assigned goals and project quality/contractual requirements are met, taking corrective actions as needed and escalating significant issues to the TM.
- Define activity and deliverable lists, establish schedules, and align activities with contractual obligations.
- Monitor discipline project progress and manhour usage.
- Develop technical annexes for subcontracted engineering activities.
- Coordinate subcontractors and report discipline budget costs to the PM.
- Oversee workflows, interfaces, quality checks, and approvals for all discipline project documents, including vendor-related ones.
- Track and update scope of work changes and associated manhour/cost estimates.
- Provide technical support to procurement, construction, and other project functions.
- Assist the PM in technical client interactions (as delegated by the TM).
- Define and issue purchase requisitions.
- Ensure technical bid evaluations and vendor follow-ups.
Support construction inspection plans and vendor inspection test plans.
E. Construction and Startup
- Assist the construction team in implementing engineering solutions on-site.
F. Home Office Activities
- Validate manhour and cost estimates.
- Review key project documents in line with internal procedures.
- Assist project teams in resolving non-standard technical challenges.
- Update discipline workflows and technical standards.
- Support the creation of execution plans.
- Monitor discipline project KPIs.
- Participate in vendor technical qualifications and procurement strategy development.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer is responsible for executing tasks within their area of responsibility while ensuring compliance with QA/QC and HSE requirements. Key responsibilities include:

A. Development of Technology Knowledge and Commercial Support
B. Feasibility
C. Bidding Phase / Commercial Proposal Development
- Select critical materials.
- Estimate project costs.

D. Project Execution
- Ensure the quality, adherence to budget, and timely delivery of piping material tasks.
- Review and analyze the client’s technical documentation and requirements.
- Design all piping components.
- Develop project piping material specifications and piping component data sheets.
- Perform pipe wall thickness calculations.
- Prepare technical specifications for the requisition of piping components.
- Conduct technical bid evaluations for piping component offers.
- Review and approve vendor documents.
- Maintain project technical files and update company standards.
- Perform inter-disciplinary checks on documents within the piping materials scope.
- Verify documents prepared by piping material engineers.
- Validate the issued MTO with the Lead Engineer.
- Establish and manage the Piping Material Management System (PMMS) database.
- Support the inspection department as needed.
- Draft mechanical valve specifications for motorized valve bodies.
- Notify the Project Piping and Layout Leader of potential technical, financial, or scheduling risks.
- Contribute to the REX (Return on Experience) report for piping materials after contract completion.
- Evaluate piping material costs.
E. Construction and Start-Up
- Provide technical support.
- Assist with engineering adjustments on-site, if required.
F. Home Office Activities (Master)
- Validate cost estimates.
- Coordinate projects by providing guidance to discipline leads and material engineers to harmonize designs and methodologies.
- Support projects and procurement by addressing both standard and non-standard issues.
- Propose modifications to departmental workflows and technical standards.
- Contribute to updates in company workflows and technical standardization processes.
- Collect project feedback for continuous improvement through lessons learned.
- Participate in vendor and outsourcing qualification processes.
- Contribute to procurement strategy development with the purchasing team.
- Identify and develop tools to streamline design activities.
-Plan, oversee, and manage outsourced engineering centers.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Designer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A-Development Technology know how and Commercial support

B-Feasibility

C-Bidding phase/Commercial proposal development

▪ Analyse and understand Tender technical requirements for electrical systems

▪ Take part in electrical system design review

▪ Identify technical queries, deviations and alternatives to be submitted

▪ Implement bidding methodologies, design criteria and guidelines

▪ Define and issue Request for quotation for electrical materials not estimated in house

▪ Prepare material quantities and weights (MTOs) for estimation

▪ Prepare bill of quantities (BOQ) for erection works cost estimation

D-Project Execution (Job progress and completion)

▪ Review Client technical documentation and requirements

▪ Take part in definition of electrical system plant design requirements

▪ Prepare technical documentation (specifications, data sheets, inspection data sheets) for electrical bulk materials

▪ Check and review technical documentation according to Project and client procedures

▪ Prepare Purchase Requisitions and bids technical evaluation for electrical bulk materials

▪ Perform check and review of Vendor technical documentation for electrical bulk materials

▪ Develop electrical system plant design (cable routings, grounding, lighting and tracing layouts) and substations

arrangements in 2D or 3D

▪ Perform power cables sizing

▪ Take part in definition of typical installation details and bulk materials selection

▪ Prepare electrical materials take off (MTOs)

▪ Prepare bill of quantities for electrical system installation

▪ Participate to 3D Modelling plant review

E-Construction and start up

▪ Support Construction for electrical system installation works and bulk materials management

▪ Assist, when necessary, engineering adjustment and define modification

▪ Review as built the technical documentation.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer executes the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase/Commercial proposal development

▪ Prepare Telecommunication Systems quantities for cost and erection works estimates

▪ Support Discipline Lead to define man hours and cost estimates

D - Project Execution

▪ Review Client technical documentation and requirements

▪ Coordinate subcontracted engineering activities and control subcontracted engineering documents

▪ Define engineering design basis and guidelines

▪ Prepare the technical documentation for Telecommunication material and services requisitions and prepare, according to

internal procedures, the technical evaluations

▪ Provide technical support to Project Team

▪ Optimise Telecommunication Systems design ensuring minimal cost and complexity in compliance with the contractual and

safety requirements

▪ Prepare Telecommunication systems functional specifications

▪ Prepare Telecommunication equipment data sheets

▪ Validate Vendor Telecommunication BOQs

▪ Coordinate detail engineering activities and ensure proper installation drawings definition

▪ Participates to F.A.T. activities and Vendor workshop

E - Construction and start up

▪ Participate to Site Acceptance Test and functional checks

▪ Provide technical and engineering support to construction Team

▪ Perform site engineering activities during construction and commissioning phases.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Ensures the execution of the engineering activities within his area of responsibility, works following the TM

guidelines, cooperates with the other Project positions and ensures the compliance with the QA/QC and HSE requirements.Tasks include:

A-Development of Technology know-how and Commercial support

B-Feasibility

▪ Provide technical support to other Project positions for specialist aspects

C-Bidding phase/Commercial proposal

▪ Analyse and understand Tender documentation

▪ Define Discipline list of activities and deliverables and coordinate activities in accordance with Project schedule

▪ Identify technical queries, deviations and alternatives to be submitted

▪ Implement bidding methodologies, design criterias and guidelines

▪ Define and issue Request for quotation for not estimated in-house items

▪ Coordinate material quantities and weight estimation

▪ Prepare engineering manhour and material cost estimations

▪ Support the Proposal Manager during technical clarification meetings with the Client

D-Project Execution

▪ Ensure the achievement of the assigned goal and the fulfillment of the Project quality and contractual requirements. Take the necessary corrective actions within the Discipline Project Team to meet the assigned goal. Report to the TM for more

extensive problems

▪ Define list of activities and deliverables, setup time schedule, coordinate activities in accordance with contractual requirements

▪ Ensure Discipline Project progress, monitor and control manhour consumption

▪ Prepare technical annexes for engineering activities to be subcontracted

▪ Ensure subcontractor coordination and monitoring/reporting to PM of the Discipline budget costs

▪ Ensure proper Discipline workflow, interfaces, quality checks and ap proval of all Discipline Project documents, including Vendor ones

▪ Track and report to TM Discipline scope of work changes updating manhour and cost estimates

▪ Provide technical support to Project functions including Procurement and Construction

▪ Support PM in technical interfacing with the Client (according to TM)

▪ Define and issue Purchase Requisitions

▪ Ensure Technical Bid Evaluations

▪ Ensure Vendor follow-up activities

▪ Provide technical support for the definition of the Discipline construction inspection plan

▪ Manage Vendor inspection test plan approval and support post order activities -Construction and start up

▪ Support the construction team in implementing the engineering solutions at site F-Home office activities (master)

▪ Verifiy manhour and cost estimates

▪ Check key Project documents according to internal procedures

▪ Support Project teams to solve non standard technical issues

▪ Update Discipline workflows and technical standards

▪ Support execution plan definition

▪ Monitor Discipline Project KPIs

▪ Participate to Vendor technical qualification and to procurement strategy definition.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

A. Development of Technology Knowledge and Commercial Support

• Provide technical support as needed.

B. Feasibility

• Offer technical assistance for project feasibility evaluations.

C. Bidding Phase/Commercial Proposal Development

• Prepare lists of deliverables and develop sketches for studies.
• Estimate material quantities (BOQs) and weights (MTOs).

D. Project Execution (Progress and Completion)

• Execute assigned tasks related to the production of drawings and quantity assessments in line with project requirements and milestones.
• Develop sketches for studies and pre-designs of civil and structural works, focusing on cost efficiency, simplicity in fabrication, and safety.
• Create detailed BOQs for civil works and MTOs for steel structures.
• Conduct quality checks on all discipline project deliverables, including those produced by subcontractors.
• Coordinate drafting activities performed internally and externally.
• Maintain and update project documentation lists.

E. Construction and Start-Up

• Provide field engineering support on-site.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Draftsman is responsible for performing tasks within their area of responsibility, ensuring adherence to QA/QC and HSE requirements. Key responsibilities include:

A. Development of Technology Knowledge and Commercial Support
Provide technical support as required.
B. Feasibility
Offer technical assistance during feasibility studies.
C. Bidding Phase/Commercial Proposal Development
- Create sketches for studies.
- Estimate material quantities (BOQs) and weights (MTOs).
D. Project Execution (Progress and Completion)
- Execute assigned tasks related to drawing production and quantity assessments.
- Develop sketches for studies and preliminary designs of civil and structural works.
- Prepare detailed BOQs for civil works and MTOs for steel structures.
- Conduct quality checks on all project deliverables, including those from internal and external subcontractors.
- Coordinate drafting activities within the company and with external partners.
- Maintain and update project documentation lists.
E. Construction and Start-Up
- Provide drafting-related support for field engineering activities on-site.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Execute the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE requirements

Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase / Commercial proposal development

▪ Bill of material

▪ Plot plan layout proposal

▪ Support lead to define man hour and cost estimate D - Project Execution

▪ Ensure the Piping and Layout engineering support to different projects

▪ Ensure the achievement of assigned goals and the fulfilment of project quality requirements and contractual obligations

▪ Analyse technical documents (e.g. specifications, calculation notes, drawings) to assess the scope of the studies required and the potential risks

▪ Seek solutions which can bring overall savings to the project

▪ Estimate quantities or validate estimation done by other specialist of the team

▪ Check all produced documents (internal or subcontracted) like design reports, technical specifications, drawings under responsibility

▪ Write the Piping and Layout methodologies / Design Premises comprehensive of all necessary data, general and specific design guidelines

▪ Ensure the achievement of assigned goals and the fulfilment of project quality requirements and contractual obligations

▪ Analyse project technical documents to validate consistency between the budget, resources and means allocated for the work completion and the targets to be met

▪ Organize the work of the team under responsibility

▪ Define and follow-up the planning of resources mobilization

▪ Monitor and report actual progress including 3D / check for Discipline activities, includ ing control of men-hours and delivered documents

▪ Control the input data for team activities and check/review all documents issued by the team

▪ Attend to internal review activities and inter-discipline check meetings

▪ Provide technical support to Project group

▪ Provide technical support to Procurement, Subcontracting and Construction activities included in the scope of work

▪ Supervise the writing of specifications and requisitions as well as technical bid evaluations

▪ Inform on a permanent basis the Project Piping and Layout leader of any foreseen technical or financial or delay risk

▪ Feed the Piping and Layout Department improvement system by reverting the lessons learned during the project E - Construction and start up

▪ Participate to test circuit verification

▪ Field engineering during construction activities

▪ Assist, when necessary, engineering adjustment on site

▪ Material management at site

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Perform tasks within the assigned area of responsibility while ensuring compliance with QA/QC and HSE requirements.Tasks Include:

- Continuously verify that input information used for assigned work aligns with project developments and report any anomalies to the Project Piping and Layout Designers or Project Specialist Lead.
- Conduct 3D modeling using PDMS, PDS, or SmartPlant 3D software.
Create construction or design drawings for piping networks using 2D software or by extracting details from 3D models (e.g., overall plot plans, equipment layouts, piping general arrangements, piping isometrics, and piping supports).
- Generate bills of materials (BOMs) or material take-offs (MTOs) for requisitions.
- Maintain document quality through thorough and consistent self-checks.
- Approve and sign off on produced documents.
- Communicate any modifications resulting from issued documents to relevant stakeholders.
- Verify documents produced by other draftsmen on the team, as needed.
- Update documents following feedback or comments from inter-discipline checks or external project stakeholders (e.g., Client, Yards, or Third-party reviews).
- Apply relevant provisions of the Piping and Layout Department

- Quality Control Procedure during all assigned tasks.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements.

Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase / Commercial proposal development

▪ Estimate quantity and cost for critical support

D - Project Execution

▪ Be responsible for the quality, respect of budget and respect of project schedule for piping flexibility analysi s tasks

▪ Review the Client technical documentation and requirements

▪ Be responsible for the design of all piping supports components

▪ Issue project piping flexibility (Stress analysis) specification and critical lines list

▪ Perform calculations of critical piping networks

▪ Issue loads to allow the design of pipe-rack and foundations

▪ Issue technical part of requisitions for all piping supports components required by flexibility analysis

▪ Issue technical bid evaluation for all piping supports components offers

▪ Issue technical part of requisitions for all piping supports components purchase orders

▪ Review and approve vendors documents

▪ Maintain project technical files and update Company standards

▪ Perform the inter-disciplines checking for the part of documents in accordance with the scope of piping flexibility section

▪ Check sub-contracted discipline engineering documents in accordance with the scope of piping flexibility section

▪ Check documents issued by piping flexibility engineers

▪ Check the isometrics for construction of critical lines

▪ Assist P and ID section preparation for flexibility inputs of line list

▪ Inform on a permanent basis the Project Piping and Layout leader of any foreseen tech nical or cost impact or delay risk

▪ Capitalize piping flexibility activities performed during the project E - Construction and start up

▪ Provide technical support

▪ Assist, when necessary, engineering adjustmenton site

F - Home ofice activities (Master)

▪ Projects coordination: provide input to Flexibility Engineer to harmonize design and methodologies

▪ Provide support to projects and procurements to solve non standards problems

▪ Define the modification of department work flow and dep technical standards

▪ Participate to the modification of company work flow and technical standardisation

▪ Collect project feed backs for continuous improvement implementation (Lesson Learned)

▪ Participate to vendor and outsourcing qualification

▪ Participate to project/company procurement strategy (Purchasing team)

▪ Develop and scout tools for simplified design activities

▪ Plan, control and manage outsourcing engineering center

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Key Responsibilities:

A. Development of Technology Expertise and Commercial Support

B. Feasibility

• Provide technical support to other project roles for specialist matters.

C. Bidding Phase / Commercial Proposals

• Analyze and interpret tender documentation.
• Define discipline-specific activities and deliverables, coordinating them in line with the project schedule.
• Identify and submit technical queries, deviations, and alternatives.
• Implement bidding methodologies, design criteria, and guidelines.
• Develop and issue requests for quotations for items not estimated in-house.
• Coordinate material quantity and weight estimation.
• Prepare engineering man-hour and material cost estimates.
• Assist the Proposal Manager during technical clarification meetings with the client.

D. Project Execution

• Ensure assigned goals are met while adhering to project quality and contractual standards. Take corrective action as needed within the team and escalate significant issues to the TM.
• Define activities and deliverables, establish timelines, and coordinate efforts per contractual obligations.
• Monitor and manage project progress and man-hour consumption.
• Prepare technical annexes for subcontracted engineering activities.
• Oversee subcontractor coordination and report discipline budget costs to the PM.
• Ensure discipline workflows, interfaces, quality checks, and the approval of all discipline project documents, including vendor submissions.
• Track and report scope of work changes to TM, updating man-hour and cost estimates as needed.
• Provide technical support to procurement and construction teams.
• Assist PM with client technical interactions, as directed by TM.
• Define and issue purchase requisitions.
• Perform technical bid evaluations and follow up with vendors.
• Support the creation of discipline construction inspection plans and manage vendor inspection test plans.

E. Construction and Start-Up

• Assist the construction team in implementing engineering solutions on-site.

F. Home Office Activities (Master)

• Verify man-hour and cost estimates.
• Review and validate key project documents in accordance with internal procedures.
• Assist project teams in resolving non-standard technical challenges.
• Update discipline workflows and technical standards.
• Contribute to the definition of execution plans.
• Track and analyze discipline project KPIs.
• Participate in vendor technical qualifications and procurement strategy development.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Carry out activities within the assigned area of responsibility, ensuring compliance with QA/QC and HSE standards.Tasks Include:

A - Development of Technology Knowledge and Commercial Support

B - Feasibility

C - Bidding Phase/Commercial Proposal DevelopmentD - Project Execution
- Design, execute, or review piping and layout studies, including:3D modeling.
- Review of 3D models with other disciplines and issuing clash check reports.
- Preparation of construction or design drawings (2D or extracted from 3D) for piping networks, including overall plot plans, equipment layouts, piping general arrangements, piping isometrics, and piping supports.
- Development of bills of materials or material take-offs (MTOs).
- Extraction of bills of materials and related information from 3D CAD models.
- Organize the team’s workflow and oversee resource mobilization planning.
- Coordinate the team’s work with piping and layout engineers involved in the project.
- Verify input data and review all documents and outputs generated by the team.
- Continuously monitor project assumptions underlying team activities and notify the Piping and Layout Lead of any anomalies.
- Supervise document updates following feedback from inter-discipline checks or external reviews (e.g., client, yards, third parties).
- Contribute to department improvements by sharing lessons learned during the project.
E - Construction and Start-Up

-Oversee material management on-site.
-Provide engineering support during the construction phase.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Draftsman executes the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A-Development Technology know how and Commercial support

B-Feasibility

C-Bidding phase/Commercial proposal development

D-Project Execution (Job progress and completion)

▪ Perform 2D drawings developed for electrical system design (single line diagrams, schemes and wiring diagrams)

▪ Perform 2D drawings developed for electrical system plant design (cable routings, grounding, lighting and tracing) and

substations arrangements

▪ Extract 2D drawings from the 3D model (cable routings and sections, grounding layouts, lighting layouts, etc.)

▪ Extract material quantities from the 3D model

▪ Implement electrical system installation details in 3D plant model (cable routings, supports, equipment)

▪ Participate to 3D modelling plant review

▪ Implement electrical load list and cables schedule in software tools

▪ Implement electrical materials take off (MTOs) in software tools

▪ Implement bill of quantities (BOQ) for electrical system installation in software tools

E-Construction and start up

▪ Review as built the technical documentation

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Designer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A - Development Technology know-how and Commercial support

B - Feasibility

C - Bidding phase/Commercial proposal development

▪ Prepare Instrumentation bulk material quantities (BOQs and MTOs) for cost and erection works estimates

▪ Support Discipline Lead to define man hours and cost estimates

D - Project Execution

▪ Review Client technical documentation and requirements

▪ Follow-up subcontracted engineering activities and control subcontracted engineering documents

▪ Apply engineering design basis and guidelines

▪ Prepare the technical documentation for Instrumentation bulk material requisitions and prepare, according to internal

procedures, the technical evaluations

▪ Provide technical support to Project Team

▪ Optimise Instrumentation bulk material design ensuring minimal cost and complexity in compliance with the contractual and

safety requirements

▪ Prepare Instrumentation bulk material technical specifications

▪ Prepare Instrumentation installation drawings

▪ Prepare Instrumentation BOQs and MTOs

▪ Perform Instrumentation 3D modelling design activities and participate to 3D Modelling reviews

E - Construction and start up

▪ Provide technical and engineering support to construction Team

▪ Perform site engineering activities during construction and commissioning phases.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is in the Waste management industry.

About the role:

• Products / Systems Manage product life cycles including new products and accessory configuration updates.
• Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements.
• Focus on Product and system Application Development for Southeast Asia and China, including technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design (Team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

• To attend technical review with sales team
• To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

• To attend coordination meetings with architects, m&e and structural consultants
• To coordinate and determine the level of pipe sleeve crossing under major roads
• To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc
• To determine the position and depth of launching pits that will aid the installation under major roads
• To study and highlight authority requirements during the meeting.
• To reply to HDB review form
• To reply to NEA BP, DC, WD Advise
• To produce preliminary drawings to aid the tender process for main contractor
• To prepare drawings for PWCS QP endorsement
• To prepare drawings for Acoustic Consultant’s specifications
• To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

• To attend technical meetings with main contractors
• To coordinate pipe clashes with m&e and structural services

Design Support

• To generate fabrication drawings for non-standard equipment
• To monitor project design submission schedule
• To allocate work assignments to other designers
• To check designs, shop drawings done by other designers
• To hold trainings to designers

About you:

• Bachelor’s or master’s degree in automation, mechanical engineering or relevant fields.
• More than 8 years product and application experience in Construction/Engineering industry.
• Good business negotiation and presentation skills.
• Excellent communication skills with local and western customers and colleagues.
• Good leadership to lead technical team to enable faster business growth.
• Proper flexibility and agility.
• Goal and results oriented.
• Able to work independently with professional judgments, proactivity and team player spirit.
• Willing to take up challenging assignments with such track records.
• Revit & AutoCAD

Other information:

• Work location: Central
• Working days: Mon-Fri, 9am to 6pm

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

A. Development of Technology Knowledge & Commercial Support
Provide technical assistance in their area of expertise.
B. Feasibility
Offer technical support for project feasibility studies.
C. Bidding Phase/Commercial Proposal Development
- Review technical documents related to tenders.
- Define activity and deliverable lists, and coordinate tasks according to the project schedule.
- Identify and address technical queries, deviations, and alternatives for submission.
- Apply bidding methodologies, design criteria, and guidelines.
- Assist the proposal team with RFQs for commercial purposes.
- Estimate material quantities and weights (MTOs).
- Prepare manhour, item, bulk, and material cost estimates.
- Engage with clients and attend clarification meetings.
D. Project Execution (Job Progress and Completion)
- Achieve assigned goals and meet project quality and contractual requirements.
- Collaborate with the Discipline Leader to define activity and deliverable lists, set schedules, and coordinate activities per contractual requirements.
- Develop design specifications for civil works, including concrete works, plant roads, underground networks, and piling.
- Prepare detailed BOQs for civil works and buildings and MTOs for steel structures.
- Create technical documentation for subcontracted engineering activities.
- Design systems for drainage, sewage, plumbing, and building interiors.
-Conduct studies for foundations and concrete structures.
- Perform quality checks on all discipline-related project documents, including vendor submissions.
- Track and report scope changes to the Discipline Leader, updating manhour and cost estimates.
- Provide technical support to procurement, construction, and other project functions.
- Assist the Discipline Leader/TM in interfacing with clients on technical matters.
- Develop technical documentation for civil material requisitions and support procurement with technical evaluations.
- Collaborate with the Discipline Leader on Technical Bid Evaluations.
Review and address Client's technical documentation and requirements.
- Maintain project technical files.
- Execute assigned engineering activities, including detailed design, verification, and studies.
- Supervise and approve engineering designs and construction drawings for civil items like foundations, structures, and buildings.
- Monitor and report trends in civil quantities compared to bid-phase estimates.
- Design functional layouts, architectural aspects (3D modeling), and interior finishes, including furniture.

E. Construction & Start-Up
Provide field engineering support on-site.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Bidding Phase:

• Assist Project Management in selecting CAD software, evaluating client requirements, and exploring alternative solutions.
• Support Project Management in assessing cost and schedule impacts associated with 3D model tool selection.

Project Execution:

• Ensure the review and application of contractual requirements within the area of responsibility.
• Prepare project specifications for 3D software setup and user guidelines.
• Set up 3D modeling and review tools, providing support to 3D model specialists.
• Collaborate with the ICT team to manage activities related to 3D modeling software systems.
• Develop and maintain component libraries by gathering required component dimensions and data.
• Identify critical issues in 3D model development within the scope of responsibility and propose recovery measures.
• Establish tools for issuing 2D drawings and extracting data, including piping isometric drawings and MTOs.
• Configure the 3D model for data import and export processes.
• Ensure standardization of 2D drawing formats and 3D model elements.
• Contribute to constructability analyses through dedicated review sessions.

Construction Phase:

• Assist the construction team in setting up spooling tools.
• Provide support for as-built 3D modeling activities.

Staff Activities:

• Advocate for the optimization of engineering workflows and technical standards to enhance efficiency.
• Gather project feedback to drive continuous improvement of workflows (Lessons Learned).
• Research and evaluate new CAD tools in the market.
• Identify skill gaps and coordinate CAD software training for personnel.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading global pharmaceutical manufacturing company.

*This role will be hired on a 1 year contract to support our client's project, with possible extension / renewal*

About the role:

• Demonstrate the ability to lead technical projects from concept through implementation in collaboration with the Process Engineering team.
• Perform activities such as incoming goods inspection (IGI), FAT/SAT, and installation verification for new equipment and modifications to existing equipment.
• Assist with the execution of qualification protocols for IQ and OQ.
• Support all phases of engineering project implementation to ensure alignment with scope, schedule, budget, quality, and safety requirements.
• Be capable of reading and understanding PCS7 Functional Specifications, ensuring they are fit-for-purpose and aligned with business needs.
• Coordinate with the Automation team, as well as with manufacturing and MSAT teams, for improvements or implementing changes related to software FAT.
• Collaborate with engineering consultant firms and process engineers to support and complete tasks within the schedule for new and modified equipment, including:
  o Reviewing P&IDs, standard detail drawings, URS, etc.
  o Involving in Factory Acceptance Testing (FAT) of all process equipment, when applicable.
  o Coordinating inspection site installation of new equipment upon delivery.
  o Reviewing Vendor Turnover Packages and Construction Trade Turnover Packages.
  o Reviewing functional specifications.
  o Participating in Software FAT using PCS7, if applicable.
  o Assisting in commissioning and qualification of new or modified equipment in Cell Culture or Downstream (Purification) areas, including reviewing and executing C&Q documents.
• Target delivery of results on the first attempt.
• Adhere to applicable Environmental, Health, and Safety (EHS) requirements.
• Commit to maintaining fair and respectful relationships with others and behaving according to the company's code of conduct.
• Perform other duties as assigned by process engineering team members or management.

About you:
• 3 to 5+ years of experience in Upstream/Downstream bioprocess operations and demonstrated experience in equipment design within the pharmaceutical/biopharmaceutical industry.
• Experience in an engineering role supporting cGMP operations in a pharmaceutical/biopharmaceutical manufacturing plant is highly desirable.
• Experience in the design and operation of biopharmaceutical manufacturing equipment and facilities.
• Experience in the management and coordination of engineering and construction management consultants, equipment vendors, and contractors.

Key Skills and Competencies:
• Process and equipment knowledge of biological drug substance manufacturing processes; expertise in downstream unit operations is highly preferable.
• Knowledge/experience in change control management and deviation investigation & closure.
• Understanding of equipment commissioning, various stages of qualification, and process activities.
• Thorough knowledge of current Good Manufacturing Practices (cGMP) and Good Engineering Practices (GEP).
• A solid understanding of design principles and standards within biopharmaceutical facilities.
• Strong knowledge of sanitary design aspects of biopharmaceutical manufacturing equipment.
• Ability to communicate effectively, both in writing and orally, at all levels.

*Please note that only shortlisted candidates will be contacted.*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading global engineering and project management consultancy embarking on large-scale infrastructure and environmental projects.

*Please note that this role will be hired on a long-term contract to support our client's project.

*Work Location: West

*Salary range: $6,000 - $7,200

About the role:

· Lead the site supervision team on all the Civil and Structural and Building Construction works.

· Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.

· Address and respond to all Contractor’s RFI’s and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.

· Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

About you:

· Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.

· Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.

· Registered with IES as Resident Engineer (Civil).

· A person with good communication and leadership skills.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading international chemical manufacturing company.

About the role: The Production Engineer is responsible for improving the production technology of the upcoming plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures, and operation condition sheets in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, troubleshooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utility consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grades, new processes and equipment with the Production Technology Engineer.
• With a feasibility study, optimize plant operating efficiency, yield optimization, and energy conservation. Then, conduct the necessary field tests to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measures for customer complaints in a technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ findings and recommend modification, improvement, and potential investment projects such as debottlenecking, and environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with the technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked-up P&IDs and the required technical information for cost estimation purposes.
• Coordinate with the Technical department all plant improvement and modification activities working closely with the Technical Process engineer to prepare detailed
• engineering design, preparing specifications and requisitions for major equipment purchases, reviewing vendors’ documents, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with the Technical department for regular updates of P&ID’s, and instrument list, and equipment list.
• Communicate with the global process improvement team to build synergy for further technical updates of new plant.

About you:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.
• Demonstrated skill to in leadership, developing others, and working in a team-based environment.
• Outstanding verbal and written communication, presentation, interpersonal, creative thinking, consulting, and analytical skills.
• Excellent communication skills
• Ability to prioritize work to manage multiple projects to meet deadlines.
• Excellent problem-solving/decision-making skills.
• Ability to multi-task

Preferred qualifications:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction processes, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programing and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

*Please note that only shortlisted candidates will be contacted

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading international chemical manufacturing company.

Work Location: Jurong Island (company transport provided)

About the role:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of:

(a) daily maintenance [preventive, corrective, & breakdown maintenance],

(b) transition maintenance,

(c) turnaround maintenance and

(d) upgrading and improvement related to maintenance

• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s
• HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability
• objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

About you:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.
• An aptitude for and interest in chemical process
• Analytical skills
• Ability to work well under pressure
• Good communication skill and able to collaborate with different functions
• Problem-solving skills

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Job Summary:

We are seeking an experienced Creative Director to drive design excellence across the company's digital platforms and marketing initiatives. This leadership role combines oversight of the UI/UX design team responsible for web and mobile app design, with the management of the graphic design team responsible for a wide range of visual assets, including event key visuals, logos, banners, posters, and more. Additionally, the role involves planning and executing exclusive client events aimed at high-net-worth individuals, as well as overseeing both internal and external company activities.

Key Responsibilities:

1. UI/UX Design Leadership:

• Lead and manage the UI design team, overseeing the design of web and mobile applications, ensuring that the company’s digital experiences are both user-friendly and aesthetically engaging.
• Contribute directly to product design by creating wireframes, prototypes, and high-fidelity UI designs that reflect the needs of users and align with business goals.
• Conduct user research, usability testing, and gather feedback to continuously refine and optimize user interfaces.
• Collaborate with product managers, developers, and other cross-functional teams to ensure designs are seamlessly integrated into products.
• Maintain consistency and quality across all digital products, ensuring a cohesive design language and visual identity.

2. Graphic Design Leadership:

• Lead the graphic design team, taking full responsibility for the company’s visual design initiatives, including but not limited to event key visuals (KVs), logos, banners, posters, brochures, and promotional materials.
• Ensure all graphic design work aligns with the company’s branding and overall creative direction.
• Collaborate with marketing and product teams to develop compelling visuals for online and offline campaigns, ensuring brand consistency across all touchpoints.
• Create and manage the company’s graphic design assets library, ensuring that all materials are easily accessible and up-to-date.

3. Event Planning & Execution (High-Net-Worth Client Activities):

• Lead the planning, design, an exclusive series of activities and events targeted at high-net-worth clients, designed to build and maintain strong relationships with key stakeholders.
• Coordinate internal and external events, ensuring that they are designed and executed flawlessly in line with the company’s objectives.
• Collaborate with the marketing and PR teams to ensure all events have strong visual elements, including event branding, invitations, and promotional materials.
• Manage logistics and oversee creative processes for all event materials, from digital invitations to venue design and event collateral.

4. Cross-Functional Collaboration & Leadership:

• Provide leadership, guidance, and mentorship to both the UI/UX and graphic design teams, fostering a collaborative, creative, and results-driven environment.
• Work closely with cross-functional teams (product, marketing, sales, etc.) to ensure design solutions meet business objectives and contribute to company success.
• Oversee project timelines, resource allocation, and design workflows, ensuring that deadlines and objectives are met efficiently.
• Stay up-to-date with the latest design trends, tools, and technologies, ensuring the team maintains a cutting-edge design approach.

Requirements:

• Bachelor’s degree in Graphic Design, Interaction Design, Visual Communication Design, or a related field.
• 10+ years of experience in both UI/UX and graphic design, with at least 4 years in a leadership or team management role.
• Proven experience in designing for web and mobile applications, with a portfolio showcasing high-quality UI/UX and graphic design work.
• Expertise in design tools such as Adobe Creative Suite (Illustrator, Photoshop, XD), Sketch, Figma, and other industry-standard design tools.
• Strong understanding of user-centered design principles, usability, and accessibility standards.
• Experience in leading and mentoring design teams, with the ability to foster creativity and achieve business objectives.
• Exceptional attention to detail, with the ability to balance creativity with practicality.
• Strong project management skills, with the ability to manage multiple projects and teams simultaneously while meeting deadlines.

Preferred Qualifications:

• Experience designing and executing visual materials for high-net-worth client events or luxury brand initiatives.
• Knowledge of HTML/CSS or front-end development is a plus.
• Experience working in Agile development environments is an advantage.
• Strong communication skills with the ability to present and articulate design decisions to stakeholders at all levels.

We are looking for a passionate BD & Growth professional to drive market growth and business expansion for the company. This role will involve market planning and strategy, social media operations and growth, community management and growth, as well as project-based business development. We seek someone who can develop innovative growth strategies, identify new business opportunities, and help the company achieve sustainable growth in a competitive market.

Key Responsibilities:

1. Market Planning & Marketing:Develop and implement comprehensive market planning and marketing strategies to increase brand awareness and market share;
   Analyze market trends, monitor competition, and execute effective product positioning and promotional campaigns;
   Collaborate with teams to continuously optimize marketing activities for higher ROI and performance.
   
2. Social Media Operations & Growth:Manage and operate the company’s social media platforms, ensuring increased follower count and engagement;
   Formulate social media growth strategies to improve brand visibility and user retention;
   Monitor social media trends, analyze performance metrics, and generate reports to optimize content and campaign effectiveness.
   
3. Community Operations & Growth:Oversee the management and growth of both online and offline communities, fostering user engagement and community vitality;
   Develop and implement community growth strategies to expand community size and enhance user loyalty and interaction;
   Organize online events, discussions, and interactions to increase community activity and enhance brand value.
   
4. Project Business Development (BD):Identify and pursue potential clients, partners, and business opportunities to drive strategic collaborations;
   Establish and maintain long-term partnerships, fostering mutual benefits and resource sharing;
   Participate in business negotiations, contract signing, and ensure smooth execution of collaborative projects.
   Requirements:

• Bachelor's degree or higher, preferably in Computer Science, Marketing, Business Management, or a related field;
• At least 4 years of relevant experience in market planning, social media operations, community management, or business development;
• Strong communication and cross-functional collaboration skills, with the ability to drive teams to achieve goals;
• In-depth understanding of digital marketing and social media platforms, with hands-on growth hacking experience;
• Self-motivated with a creative mindset and problem-solving abilities, able to adapt to a fast-changing market environment;
• Project management experience, capable of efficiently handling multiple projects and delivering them on time.

Preferred Qualifications:

• Experience in international market expansion;
• Proficiency in data analysis tools to optimize marketing and growth strategies based on insights;
• Practical experience in community management, user growth, and brand building.

Benefits:

• Basic Salary up to $3,000 with yearly increment based on performance.
• Rostered Schedule by Management, 5 days per week

Job Description:

This is a full time role for a Front Desk Officer located in Alexandra Rd. Our client is in the automotive industry. You will be responsible for handling phone calls and answering general inquiries. You will greet, check in, and announce customers upon their arrival. Additionally, you will manage the Sales Executive turn system and ensure the showroom is tidy and orderly. Part of your responsibilities includes ensuring that display cars are in good condition, both inside and out. You will also provide refreshments to customers and perform general administrative duties as needed.

Qualifications:

• Experienced as a Receptionist or customer service ground job.
• Have basic MS Office and data entry skills.
• Willing to work in out of office locations when requested.