• Collaborate closely with the Planning and Project Controls Manager to perform planning and scheduling, risk management, cost control, and reporting activities throughout the detailed design and construction phases of the project.
• Act as the main contact for planning, scheduling, and cost analysis, developing accurate cost forecasts and actionable reports to support effective project management.
• Prepare and deliver clear status reports, issue network-based schedules, update Primavera P6 with project progress, and monitor earned value systems to guide team performance and understanding.
• Strong knowledge of planning and scheduling to identify scheduling issues and recommend corrective actions and implement relevant control services.

Requirements:

• Degree in Project Management or equivalent
• At least 5 years EPC/full-service project delivery processes and apply project controls methodologies and practices specifically related to cost control development.
• Strong verbal and written communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• With min. 8 years relevant experience
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

The Contracts Engineering team plays a pivotal role in managing the financial & contractual provisions which is crucial to the successful delivery of building projects.

Responsibilities:

• Manage the financial & contractual provisions of all projects from pre-tender to post contract phases including quantities, variations, cost estimates, monthly claims, final accounts etc
• Work closely with Project Manager in preparing monthly updated project costing
• Develop suitable subcontract conditions for specific project requirements
• Prepare project budgeting and costing reports
• Responsible in cost estimating, quantity take off, claims preparation, variations and final accounts.
• Review of contracts, prepare tender & contract documentations, tender analysis & reporting, measurement etc
• Review sub-contractors claims and materials on site
• Standardize all agreements (e.g. subcontracts and joint ventures) with alignment to contract policy

Requirements:

• Degree in Building/ Construction Management/ Quantity Surveying or its equivalent.
• Minimum 3 years of relevant experience in construction industry.
• Strong in negotiation skills.
• Good understanding & knowledge of contracts law and its application.
• Preferably well versed in various form of contracts such as PSSCOC, SIA and FIDIC as well as other international form of contracts.
• Preferably conversant in using CostX and/or Glodon Cubicost measurement software.
• Strong communication and presentation skills.
• Only Singaporean

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses, and functions.

Accountability – Hold team and self-accountable to deliver on our commitments.

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gxuq4dY5

• Permanent role with an established company
• Exposure to wide range of technologies including cloud

About the company

Our Client is an established company within their industry. They have a well-established presence of more than 20 years with a global footprint of more than 5 countries. With rapid expansion plan, they are now looking for a .net Software Engineer to join their team.


About the job

Reporting directly to the Head of Software Development, your responsibility includes:

• Develop and maintain web/mobile applications and microservices.
• Collaborate closely with vendors, business users and project team for
• applications requirement gathering and development.
• Provide user support for key applications.
• Manage IT projects.
• Evaluate and propose suitable alternatives for software architecture, designs and implementations.

Skills and experience required

As a successful applicant, you will have at least 3 years of experience in C# / .net core. Experience to .net core is required for this role.

Candidates with exposure to cloud, devops, Angular, Vue or React will be of added advantage

Whats on offer
This is an excellent opportunity to join an established end user environment with exposure to latest technology.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gxuq4dY5 (EA: 94C3609/ R1219669)

Responsibilities:

• Provide support to customers' engineers on the development of Dry Etch process.
• Develop new or modified process formulations, define processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering.
• At least 2 years of relevant experience.
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

EA Personnel Name: Jackie Ng
EA Personnel No: R22109024
EA License No: 95C5411

About the Company

We are focusing on AI/ML, Vidoe Analytic, Cloud, and Cyber Security to provide bespoke solutions using emerging technologies through applied research and development. Due to our expansion plan, we are looking to hire a NLP Engineer to join the team.

About the Job

You will be applying NLP knowledge to develop GenAI solutions leveraging ML frameworks. Proven ability in statistical analysis, deep learning methods, understanding of generative AI methods and text representation techniques. The use cases for the NLP solutions include document search, data comparison, and chatbot-based applications.

Requirements

You will need a minimum of a bachelor’s degree in Computer Science, Computer Engineering, a related field, or equivalent professional experience.

• You will need min 2 years of hands-on experience in GenAI solution development, specifically in NLP applications (RAG, NER, JER, prompt engineering, etc.).
• Good proficiency in Python is required.
• Expertise in selecting and understanding relevant GenAI frameworks (LangChain, LlamaIndex, LlamaFactory, etc.) is required.
• Experience with ML Frameworks (Tensorflow, Pytorch, HuggingFace) is required.

R1332781

We are looking for an AI Development Engineer to be a part of our #blazeclan Singapore team!

This is an exciting opportunity for a qualified professional with an overall 4+ years of experience to join and add value to one of the Fastest Growing BIC (Born in the Cloud) company.

We would like to hire enthusiastic people who thrive on taking on challenging roles in order to give them an opportunity to hone new skills and try novel approaches.

As we are growing, we embrace diversity in thought, contribution and are committed to providing an equitable work environment.

JOB DESCRIPTION:

We are looking for a highly skilled AI Development Engineer with expertise in Python development and AWS cloud environments. In this role, you will focus on integrating and embedding AI capabilities into our products, as well as developing native AI applications leveraging mature AI technologies. While deep AI expertise is not mandatory, a solid understanding of AI concepts will be advantageous.

The ideal candidate will thrive in a collaborative environment, working with cross-functional teams to solve complex problems, deliver innovative solutions, and enhance both employee and customer experiences. Strong communication skills in English, both technical and non-technical, are essential.

Key Responsibilities

Develop and maintain scalable applications and solutions in AWS native environments.
Build, deploy, and integrate microservices architectures for AI-enabled products.
Collaborate closely with product, engineering, and business teams to identify AI opportunities and embed AI features in our offerings.
Utilize Python to build robust, efficient, and maintainable code.
Apply existing, mature AI models and services to enhance product functionality and improve business outcomes.
Participate in code reviews and adhere to development best practices.
Ensure seamless communication between various cloud-based components and services within AWS.
Support the design, testing, and troubleshooting of cloud-native AI applications.
Foster a collaborative team environment by contributing ideas and openly engaging with peers.

Requirements

Proficient in Python development with extensive hands-on experience.
Strong expertise in AWS services (e.g., Lambda, S3, EC2, SageMaker, DynamoDB).
Familiarity with microservices architecture and cloud-native development.
Experience in deploying and managing AI-powered applications within cloud ecosystems.
Ability to work with existing AI models and integrate them into products.
Excellent communication skills with the ability to convey complex technical concepts clearly.
Strong team player and collaborator, able to work effectively across multidisciplinary teams.
Preferred Qualifications

Background or knowledge in AI/ML concepts and frameworks.
Experience with DevOps and continuous integration/continuous deployment (CI/CD) pipelines.
Familiarity with containerization technologies (e.g., Docker, Kubernetes).
Prior experience with AWS tools like SageMaker, Rekognition, or Comprehend.


---------------------------------

We are Great Place to Work certified; looking for technically forward, cloud-savvy professionals.

Join us and commit to work in an ambiance that is free of prejudices.

If you think you could be the perfect fit for us, then take the leap and apply today!

Let us know at: [email protected]

We would love to hear from you!

Mission

• Plan and implement the Project Quality Management System (PQMS) activities within the project and organization.
• Plan and ensure the project Quality Control (QC) activities implementation
• Report Quality information and data about Project in line with Corporate Guidelines
• Act as focal point for quality related matters within the project and in liaison with external entities.
• Act as Auditor Lead for ISO matters.

Major Duty and Tasks

• Ensure the definition and implementation of the PQMS and the identification, preparation and distribution of needed Project Quality Plans and procedures in accordance with the Company and External Parties Quality Management System (QMS)
• Ensure that the integrity of the Company QMS is maintained when changes are made to the system for the project
• Ensure that the correct implementation of the Project QMS is checked and monitored through the planning of quality audits
• Ensure that the correct implementation of planned quality audits, taking in account all project processes, including the issue of relevant audit reports
• Ensure, within the project organization, the planning of activities aimed at promoting the applicable Contractual Quality Requirements
• Conduct external audit to Vendors and Subcontractors QMS and ISO requirements
• Ensure, within the project organization, the planning of activities aimed at promoting the applicable Contractual Quality Requirements
• Plan and allocate Quality resources to the various area of the project, managing them in liaison with involved Quality functions
• Support the Project Manager in relations with the Client and with the Authorities responsible for quality matters
• Participates to Project Management meetings, to ensure coordination between Quality activities and Project Management activities
• Ensure the preparation and issue of QC specifications for the works, coordinating and agreeing the checks by the Technical Departments and Client
• Ensure the issue of quality requirements to be incorporated, in the contractual documents, with Vendors and Subcontractors and organizations in charge of works
• Ensure the Site QC activities implementation, including the monitoring of QC management tool updating
• Ensure management of nonconformities
• Promote appropriate actions in order to prevent or eliminate potential non-conformities and their causes
• Ensure the management of Cost of Non Quality process
• Ensure knowledge and awareness of Quality requirements within the Project Team, also performing Quality Training activities
• Collect and analyse project quality data also to organize and lead the Project Quality Management Review
• Ensure the management of lessons learned process
• Ensure Customer satisfaction process implementation
• Report Project information and data to Company's Quality Manager by means of Corporate methodologies and tools and keep the Project Quality Reporting tools updated.
• Providing leadership, mentorship, and direction of all QA/QC personal.

Additional Requirements

• Ability to read PID’s and Isometric drawings.
• Understand NDT techniques.
• Experience with Ferrite and PMI techniques
• Knowledge of WPS/PQR activities
• Knowledge of Painting
• Familiar with AWS/ASME/ANSI codes and standards
• Experience with general Oilfield fabrication products
• Maintain the required test records and update accordingly.
• Conduct incoming and outgoing inspection activities such as inspecting the final output, comparing it to the requirements, and approving or rejecting the final products.
• Monitor the welding, NDT and etc activities.

Requirements:

• Diploma/Degree in relevant/related fields
• Min 10 years of QC inspection experience for Water, Oil and Gas fabrication
• Inspection Qualifications eg: CSWIP or equivalent
• Able to communicate with various level of people
• Good in verbal and written English
• General computer knowledge is essential (MS word, excel, powerpoint, MS outlook)
• Willing and able to travel overseas

Job requirment

• Provide Level 2 support for IBM AIX operating systems and related technologies.
• Perform system administration tasks such as installation, configuration, and maintenance of AIX servers.
• Proficient in virtualization technologies such as SR-IOV,SEA, PowerVM Virtual I/O Server (VIOS), HACMP,Spectrum Scale(GPFS)
• Identify and implement security measures to protect AIX systems from potential threats.

Ability to work independently and as part of a team.

Responsibilities

· Design, testing and qualify PCBA/ module in accordance with design specification

· Work closely with peers, such as software, firmware, and mechanical engineering, to design a medical robot.

· Develop and maintain design documentation, including requirements, design documents, and test plans.

· Ensure compliance with relevant industry standards and regulations, such as FDA and ISO standards.

· Collaborate with other functional teams (mechanical design, process, software, manufacturing, and purchasing, etc.) to achieve project goals.

· Produce engineering outputs (BOM, CAD, WI etc.) for manufacturing of products.

· Navigate regulatory testing for Electrical Safety, Functional Safety, Radiated/ Conductor Emission & Immunity.

· Collaborate with product management and stakeholders to identify and prioritize new features and functionality for the robot.

Competency Requirements

· Master’s/ bachelor’s degree in electrical/ Electronic Engineering or other relevant discipline

· >5 years’ experience in product design and development, fresh graduates with keen interest in electrical design are welcome to apply.

· Strong working knowledge with microcontrollers, digital and analog circuitry design

· Strong working knowledge of firmware development

· Strong working experience in CAD software and PCB layout are preferred.

· Strong hands-on skills in debugging/ troubleshooting/ design verification are required.

· Able to work with other discipline to

· Able to provide guidance to junior engineers on development of product.

· Able to work independently, self-motivated and collaborate with peers in design team to design a product in accordance with specification.

· Experience in regulatory test is welcome.

The Snr Systems Engineer manages the systems administration function and leads the organisation's system projects and environments. He/She focuses on setting goals and priorities and on mentoring and coordination as well as providing technical leadership. He/She plans and oversees systems upgrades and migrations and ensures systems are up-to-date with the latest patches and are coherent across the organisation. He/She directs the development and maintenance of technical documentation.

He/She possesses strong leadership and communication abilities, and is able to set realistic goals and implement appropriate plans to guide the team toward achieving those goals. He/She is able to address multi-faceted issues effectively and in a collaborative manner including across departments. Set system administration processes

Role and Responsibilities:

Set system administration processes

• Establish goals and priorities, design, planning, day-to-day operation, maintenance, and advanced troubleshooting of systems

• Align system administration with overall strategic IT service direction and business needs

• Assist with the development of business case justifications and cost/benefit analyses for spending and initiatives

• Anticipate internal and/or external business challenges and/or regulatory issues

• Develop policies, procedures, and controls to ensure system security

Develop New Systems

• Partner with stakeholders to recommend innovative and automated approaches for system administration

• Define systems requirements for new technology implementations

• Prepare for system expansion by studying plans and requirements

• Oversee the design, maintenance and implementation of the systems

• Prioritise tasks to ensure projects are implemented in accordance with project plans and budgets

Optimise Systems Performance

• Recommend process, product or service improvements, resource optimisation and cost savings

• Oversee hardware and software upgrades

• Recommend new technologies, methodologies, systems or opportunities for cost savings, security and service quality improvement

Manage Teams

• Oversee team management including budgets, forecasting, work allocations and staffing

• Develop staff through ongoing coaching, mentoring and career discussions

• Define common goals, direction and accountability among staff

• Drive effective performance management practices within department in accordance with company policies and procedures

Requirements / Qualifications

• Degree in Information Technology or related

• Candidates must have at least 6 years of hands-on experience in Linux with ability to work with the project team in implementation projects as well as perform system administration activities for Linux systems. Knowledge in SAP will be advantageous but not required.

• At least 6 - 8 years’ experience in developing, implementing and maintaining IT systems

Located at Chai Chee

Precision industry (Clean room)

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to become Leader

Requirements

• Diploma in Precision Engineering
• No experience required

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

COMPANY DESCRIPTION

About the Company

JERA Global Markets (JERAGM) is a leading utility-backed seaborne energy trader specialising in LNG, coal and freight. A joint venture between majority shareholder JERA Co., Inc. and EDF Trading, JERAGM's shareholders are among the world's major utilities.

JERAGM operates one of the largest energy portfolios in the world which gives it an in-depth understanding of the way local, regional and international energy markets behave. Its in-depth knowledge and market insights enable us to capture trading opportunities, optimise portfolios, create value and enhance security of supply for our customers.

Headquartered in Singapore, JERAGM has a global talent pool of close to 300 people across offices located in four strategic locations: Singapore, Japan (Tokyo), the UK (London) and the US (Houston).

JERAGM is strongly capitalised with over US$500 million in paid up capital and a total equity of US$4 billion. JERAGM has retained its A+ Stable rating from R&I, attributable to a robust business model and solid financial base.

RESPONSIBILITIES

JERA GM is implementing a series of new IT systems to reduce its reliance on its shareholders for IT services and to enable the rapid growth into a global leader in the trading of fossil fuels.

At the core of the system landscape is a set of vendor systems that support critical business activities such as trading, risk management, pricing, and logistics. JERA GM have and will continue to make significant investments building on top of these systems to tailor them to the specific needs of its business. Up until now, this work has been performed by teams of consultants. JERA GM would like to develop an in-house capability, so they can be self-sufficient in the ongoing development on this platform.

This in-house capability needs to be able to extend, customise, configure and integrate these systems to meet the ongoing needs of the business. They will also support the development of new bespoke systems, such as for business intelligence and decision support, to meet needs not provided by the vendor systems.

The Core Platform Software Engineer will:

• Work to obtain excellent business knowledge of the full transaction cycle within a multi-commodity energy trading environment such that they can converse directly with users and other stakeholders with minimal hand-holding from Business Analysts.

• Develop new features on the company's credit system (Cubelogic) and ETRM (Energy Trading and Risk Management) system to support the company's growth (new products, new processes), in a Python/Azure (Databricks & ADF)/C# / SqlServer environment.

• Demonstrate a broad set of technical skills including expert database development and administration, Python/.NET/C# development and Powershell Automation/Devops skills.

• Build new features on the various applications that revolve around the Cubelogic/ETRM (APIs, loaders, reports, BI). It is most important that they have the ability and desire to rapidly pick up a diverse range of technical skills to support challenges as they arise. They will be actively required to work with challenges using technologies such as Azure IaaS/PaaS, Python, Databricks, Power BI.

• Apply their strong software engineering skills to:
  • Improve the ability to integrate vendor systems together.
  • Improve the ability to unit test customisations of vendor systems.
  • Improve the structure the source of such customisations.

• Work with JERA GM IT to evaluate the quality of the existing vendor system customisations and build out a prioritised backlog of improvements. Work to then safely improve the code estate to improve its flexibility and maintainability.

• Support efforts to improve end-to-end test automation and continuous integration across the application estate.

• Have a strong engineering focus and eye for high quality delivery. They will be expected to deliver high quality software and adhere to modern software engineering practices. They must also be driven to automate everything as this is ingrained in the culture of the team.

• Work within a hybrid internal/consultant/vendor team to deliver a backlog of new features, enhancements, bug fixes and integrations to support the ongoing needs of the LNG and Coal trading businesses. Demonstrate a strong ability to self-organise when required.

• Work collaboratively with the rest of the JERA GM technical team, whilst also demonstrating end-to-end ownership of entire problems where required.

• Show a highly proactive attitude in learning and immersing themselves in the vendor platforms with the aim of gaining an expert knowledge of how to develop and support extensions and integrations.

• Be comfortable with agile delivery modes such as Scrum or Kanban but also be flexible to work with whichever delivery approach works best for the problem at hand.

• Provide 3rd line production support.

Skills and Experience required

• 5-10 years of overall experience with advanced level of coding experience in either Python or C# with good knowledge of other.
• Strong experience in SQL, & PowerShell
• Modern cloud-based system architectures and technologies such as Data Lakehouse using Databricks, Azure functions and ADF
• Experience with C# .NET
  • Good understanding of the core language and framework
  • Service oriented development (WCF, Rest API, GraphQL)
  • Data access development (ADO.NET, EF or equivalent such as NHibernate)
• Extensive SQL Server database design and development skills (excellent SQL skills assumed). A good working knowledge of database performance optimisation is also required.
• Familiar with knowledge of Azure services including VNET, Key-Vaults, Azure Data Factory, ADLS Gen2, Virtual Machines, App Services, Storage Accounts and Azure Active Directory
• Orchestrating data pipelines using Azure Data factory
• Strong conceptual understanding of Big Data, Map-Reduce, Spark, file formats such as Parquet, Avro, ORC etc.
• Reporting tools such as Power BI
• Knowledge of JavaScript/UI framework like Angular/React.
• Cloud experience in Azure or AWS
• Experience with Windows Server infrastructure
• Experience working with agile delivery methodologies such as SCRUM or Kanban.
• Experience with Microsoft-based BI stack, including SSIS, SSRS and Power BI is desirable.
• Experience with Azure PaaS and IaaS and corresponding automation toolkits is desirable.
• Experience in Allegro ETRMs is desirable.
• Experience in Cubelogic is desirable.
• Proven work experience in the energy trading, commodities trading or corporate banking sector

• Highly motivated to continually develop skills and techniques to ensure the best tools are used for the job. Support, resources and technical mentoring will be provided by JERA GM as required.

• Highly motivated to deliver results and ‘go the extra mile' to meet deadlines.

• Able to multi-task with minimal supervision and highly structured and organised in the way tasks are approached.

• Excellent communication skills.

• Strong academic background, educated to degree level and/or equivalent professional qualification or relevant business experience.

AI based maintenace & Reliability Optimization Engineer:

Develop engineering solutions to overcome repetitive failures and other problems that adversely affect plant operations.

Manage and supervise a team of Calibration/E&I Technicians to perform instrument calibration and instrument maintenance activities

• Support maintenance operations and shutdown activities by working with Supervisor and Engineer on developing the annual PM plan, setting work priorities; scheduling PM activities, coordinating and resources planning to meet the schedule in cost-effective way.

Drive Sustainability: Lead initiatives for waste reduction, carbon emissions, and water conservation; assess and adopt renewable energy solutions for the manufacturing plants in semi conductor and petrochemical sectors

Continuous Improvement: Apply data-driven approaches to improve asset reliability and sustainability, integrating best practices across the manufacturing plant.

AI-driven predictive maintenance improves operational efficiency by optimizing maintenance schedules and resource allocation. Analyzing real-time data and predictive analytics allows AI algorithms to prioritize tasks and allocate resources more effectively.

Requirements

• Bachelor’s in reliablity engineering or related field

• ⁠Ability to garner technical insights from large engineering data sets using analytical tools and concepts; making competitive

• Minimum 3 years in reliability engineering, energy management, or sustainability within manufacturing

Provide 1 st and 2nd level support  Technical assistance and support for incoming IT Helpdesk and End User desktop queries and problems.  Laptop/desktop/peripherals hardware and software technical support.  Windows 7/10, Windows server, file/print/scan services, Outlook/Office 2016, Office365 suite, 2FA, LAN\WAN/Wireless network connectivity, VPN, mobile devices, meeting room audio/video conferencing systems, PABX and basic application troubleshooting.  Perform PC/Laptop Refresh, Onboarding and off boarding of users and ensure asset inventory tracking is updated.  Escalate issues to OEM/vendors and follow-up until the resolution of the problem.  Out-Of-Office-Hours On-Call support. 2. Systems administration and maintenance  Provide Wintel server, Active Directory, GPO, WSUS, Software deployment and system administration.  Liaise with external vendors for any related hardware/software maintenance and services.  Perform Installation/Configuration/Monitoring/Patching/Upgrades of desktops, servers, operating systems, antivirus, databases and other system related software.  Participate in disaster recovery testing. 3. IT governance & documentation  Involve in regular review and update of infrastructure policies, procedures and system documentation to ensure compliance.  Plan and conduct end-users training as needed.  Conduct quarterly IT asset counts.

At least 2 years of working experience in IT helpdesk providing 1st level and 2nd level end user desktop support. 2. Strong experience in End user hardware and software technical support, Windows 7/10, Office 365 administration and Active Directory. 3. Good to have networking, storage and some database administration experience. 4. Able to work on a rotating 2nd level Out-Of-Office-Hours support On-Call basis. 5. Knowledge of ITIL operation. 6. Strong analytical skills, ability to work independently and in a team environment. 7. Possesses good attitude, good interpersonal and communication skills. EDUCATION 1. Degree/Diploma in Electronic/Computer Engineering or Computer Studies or equivalent. 2. Good to have ITIL foundation certification. 3. Good to have Microsoft 365 or MCSA certification

Responsibilities

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

Competency Requirements

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

JOB DESCRIPTION

Duties:

• The project will be using AI Technology.
• Project Engineer cum Inspector need to drive Van when carry out inspections of all roads and road-related facilities.
• Must have driving license.
• Report defects picked up during inspections.
• Report immediately to the Supervisor and the Project Manager any incidents or defects posing immediate concern, safety, or inconvenience to the public.
• Submit daily reports on the condition of the roads, footpaths & walkways, service roads & footways, and road-related facilities to the Authority.
• Project duration about 3 years

Qualifications:

• Minimum 1-2 years’ experience in civil/ structural engineering works or other engineering equivalent.
• Able to recognize and identify defects on the roads, footpaths & walkways, service roads & footways, and road-related facilities.
• Good knowledge of repair methods for defects identified on roads and road related facilities.
• Minimum qualification --- Degree in Civil

Interested candidates, please forward directly the detailed resume in to [email protected]

Please include following information in the resume

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary in Singapore Dollar

3) Expected salary in Singapore Dollar

4) Personal References

Your new company
Our client is a global leader in the design, engineering, and construction of high-tech facilities, including life sciences and data centre projects. They always strive to deliver innovative solutions, ensuring safe, sustainable, and functional environments. They are going through growth mode in recent years and are now looking to expand their headcount with a principal architect.

Your new role
A few of your responsibilities would be ;

· Collaborate with multidisciplinary teams to develop mechanical systems designs meeting project objectives.

· Lead design development, implementation, and handover.

· Review and ensure technical compliance with client requirements.

· Coordinate with internal teams like Civil, Archi, Electrical, Process, and Piping.

· Manage project costs, budgeting, and tender documentation.

· Chair sub-contractor progress meetings and client weekly meetings.

· Mentor and train junior engineers.

· Ensure compliance with quality assurance and safety standards.

What you'll need to succeed

· Bachelor's/Master's Degree in Mechanical Engineering or related field.

· 6-8 years of relevant experience in design and construction, preferably in industrial buildings, life sciences, and pharmaceutical sectors.

· Strong technical expertise and leadership skills.

· Excellent communication, coordination, and problem-solving abilities.

· Ability to work independently and as part of a team.

· Familiarity with industry standards, regulations, and best practices.

What you'll get in return
You'll be offered career development opportunities, succession planning and on the job training will definitely be given to you. You’d also have an amazing team supporting you throughout your career.

What you need to do now
If you feel like you meet the above requirements or know someone who does, then click on the link to apply, or you may send your application/referral directly to me at [email protected].

If this job isn't quite right for you but you are looking for a new position, please contact me for a confidential discussion on your career.

EA Reg Number: R24121320 | EA License Number: 07C3924 |Company Registration No: 200609504D

Job Description:

• Review the basic process design from the proposal/sales team;
• Develop detailed design and P&IDs based on project specification;
• Prepare engineering calculations and equipment sizing;
• Review and understand project specifications to ensure company design complies with customer specifications;
• Prepare equipment datasheets (valve list, equipment list, piping schedule, instrument list, etc);
• Supervise and review complex equipment skid 3D model to ensure compliance with project specification;
• Supervise the preparation of general arrangement drawings, piping detail drawings; skid structure arrangement drawings;
• Interface with EIA (Electrical, Instrumentation & Automation) engineer in preparation of project documents;
• Send inquiries to vendors to obtain price quotations;
• Review of vendors, fabricators and sub-contractors quotations to ensure compliance with project specifications;
• Review of vendors, fabricators and sub-contractors engineering deliverables to ensure compliance with project specifications
• Participate in internal and external design reviews;
• Prepare O&M manuals;
• Support testing and commissioning

Requirements:

• Candidate must possess at least a degree in Environmental/Mechanical/Chemical Engineering;
• At least 5 to 8 years of relevant experience in industrial water/wastewater treatment;
• Experience in the O&G industry is a plus;
• Experience in the design of complex skid-based industrial water treatment systems;
• Experience working on multiple projects simultaneously;
• Knowledge of industry standards and specifications;
• Able to work in multi-cultural teams;
• Proficient in MS Office applications;
• Willing to travel

As a Senior Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties and Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project as directed by Piping Design Supervisor.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to Piping Key Person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer.
• To carry out engineering support work during the construction phase of the project.

Requirements:

Education:

• Bachelor degree of any four years BS Engineering course preferably Mechanical Engineering or at least ten (10) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of eight (8) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, three (3) years of which in a supervisory capacity.

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good Knowledge of AutoCAD.
• Good knowledge of SP3D.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

What You’ll Be Doing

• Design and implement innovative solutions for our full range of products.
• Build out industry-leading finanical platforms.
• Performance optimization for overall backend architecture aiming for low latency, high availability and scalability
• Build high availability high performance distributed service.
• Improve technology best practices and code reviews for peers.
• Work closely with Product, Design and Marketing teams to drive rapid innovation in cross-functional teams.

What We Look For In You

• Solid STEM (Science/Technology/Engineering/Mathematics) education background.
• Minimum 8 years of relevant experience in backend development, with data structures/algorithms.
• Strong logical thinking and problem-solving skills.
• Fluent with high performance Java and async programming patterns.
• 5 years of experience with distributed systems and micro service architecture.
• Experience leading project teams and defining technical strategies.
• Proven track record of collaborating with teams across different offices and time zones, and managing cross-functional projects.

Nice to Have

• Willing to learn all aspects of trading products in financial and crypto markets, including spot, future, swap, options, and structured products.
• Proficiency in speaking, reading and writing in both English and Mandarin to collaborate effectively with global and cross-functional team members.