Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 3+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 5 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Job Description & Requirements

Job Description:

To work with customer to identify and verify the scope of work

To work with customer or customer’s site project manager to develop project schedule

To work with project installation team to develop project installation schedule

To plan weekly work schedule with scheduler for the installation team

To work with project installation team to complete the weekly project monitoring report

To ensure timely progressive monthly project billing

To ensure that work site safety regulations are being enforced

To provide and monitor scope of work on project variation work for salesperson

Ability to work under pressure and resolve problem independently

Job Requirements:

Candidate must possess at least Professional Certificate/Nitec, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical/Electronic), Engineering (Mechanical), Computer Science/Information Technology or equivalent.

At least 2 Year(s) of working experience in the related field is required for this position.

Preferably Junior Executive specialized in Engineering - Electronics/Communication or equivale

Responsibilities:

• Report to the Chief Resident Engineer (CRE) and assist with coordination and interfacing matters with the Contractors of the IWMF and also TWRP.

• With a focus on inter-disciplinary construction management, assist the CRE to coordinate the existing team of discipline Lead Resident Engineers as required, including liaison with our in-house Engineering Design Manager (EDM) on any outstanding design issues that may affect immediate construction activities.

• Lead and coordinate the construction work interface between IWMF contractors and TWRP contractors works and tie-ins etc and in particular with counterpart Interface Manager from TWRP.

• Lead and set up interface meetings between the various Contractors to drive the Contractors to resolve their coordination and tie-in point issues.

• Coordinate with BIM Manager and set up interface BIM walk through sessions as required with the Contractors.

• Project delivery planning updates for the interfacing/tie-in points from the IWMF/TWRP Contractors with a specific focus on MEICA issues given the stage of the project.

• Coordinate and expedite internally on urgent RFA/RFI submissions with regards to interfacing matters, in particular between EPC1 and EPC2 but also with IWMF and TWRP.

• Attend other site meetings as required by CRE and coordinate internally to resolve technical issues with the Contractors with regards to interfacing matters with a specific focus on MEICA issues given the stage of the project.

• Attend and follow-up on interface/coordination matters arising from Weekly Progress Meetings, MEICA Erection Meetings, Contractors Interface Meetings, BIM Review Meetings, interface meetings with TWRP, etc and as required for the coordinated completion of the Works under each contract as they lead into the Testing and Commissioning phase of the project.

Requirements:

• A relevant Mechanical Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).

• At least 10 years of relevant experience in design coordination, MEICA interface management, and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will also be considered as relevant for a multidisciplinary experienced candidate.

* Office hours, Monday - Friday

* Location: MacPherson

* Basic + Allowances + OT + Bonus

* Permanent

Our client is a company who providing data recovery, storage solution in Singapore.

Responsibilities:

• Delivery and implementation of IT Project.
• Follow process workflow on implementation procedure.
• Update project manager and reported manager / lead on the project status and progress.
• Work with product principle to resolution deployment issue.
• Will be expected to handle multiple projects at any time.
• Willing to learn attitude on assigned task.
• Can work independently and responsibility on task assigned.
  

Requirements:

• Skillset on Virtualization, Windows and Linux Implementation.
• Knowledge of storage, server and backup software will be an advantage.
• Possess a Degree / Diploma in IT / Computer Studies or equivalent.
• 1 to 3 years of working experience in Server Operating System implementation.
  

HOW TO APPLY:
Interested applicants, please click on “Apply Now” or email to submit your resume.
We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd
EA Licence No.: 04C4294
EA Personnel: Jason Bong Wee Kiat
EA Personnel Reg. No.: R23116067

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Electrical) for the next phase of their business. They are located in West.

Duties:

• Lead Electrical discipline for CAPEX projects, supervising consultants, contractors, and vendors.
• Develop and issue Electrical design bases, specifications, and scopes of work.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Approve Electrical deliverables and develop necessary project documents.
• Support regulatory approval processes.
• Collaborate with project management and engineering teams.
• Witness factory acceptance tests (FAT).
• Ensure accuracy of engineering databases (e.g., SmartPlant tools).
• Review and document as-built deliverables.
• Follow Quality Management System and QA plans.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 15 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

The Snr EUC Engineer manages the IT support function. He provides management to a group of IT professional and support staff and focuses on setting goals and priorities. He/She plans and directs the information processing activities of the organisation and coordinates the effective design, implementation and operation of management information systems and applications. He oversees the maintenance and upgrading of support systems and conducts on-site training to promote efficient operations.

Implement IT Support Service Plans

• Lead the implementation of support services across the organisation

• Define best practices and Service Level Agreements for the support function

• Establish performance and reporting measures to provide an effective and efficient level of service

Manage IT support Activities

• Identify actions to maintain or improve levels of service

• Advise the business on IT support metrics and capabilities

Oversee System Maintenance

• Prioritise activities to ensure continuity of service and prompt issue resolution

• Oversee the compiling of data for reporting purposes

• Review trends and patterns

• Plan installation of hardware equipment, software and maintenance agreements

• Recommend acquisition of new technology and software

Provide Incident Resolution Guidance

• Analyse enquiries to identify recurring user problems, recommend solutions, and to identify areas where service can be improved

• Respond to more complex, escalated enquiries from team members

• Evaluate results of investigation reviews

• Develop problem solving guidelines, checklists, or other materials to assist staff to respond to user problems that are recurring or routine

• Oversee disaster recovery planning and testing

Requirements:

• Have prior technical knowledge on End User Computing technologies, not limited to Desktop Endpoint Management, Win10 / 11 Security Patch Management, Asset Management, GPO policy management, Active Directory Administration, Win 7 / 10 / 11 migration (plus point), M365 administration (plus point), SCCM & Bitlocker (MBAM) administration (plus point), Software deployment management (plus point)

• Have vendor management experience or have experience managing subcontractors will be an advantage

• Required to be on standby with on-call availability with varied shifts including nights, weekends and holidays

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 8+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Our client is one of the leader in the semicon industry, they are hiring a NPU Implementation Engineer for a 12 months contract

Job Description:

• Responsible for physical design and development activities of Client’s NPU Design
• Involve in activities encompass physical design and analysis of complex and PPA critical NPU
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization
• Implementation flow development
• Work closely with Client’s colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

Job Requirements:

• Bachelor’s/Master’s Degree in Electrical/Computer Engineering
• Knowledge in Neural Processor Unit Familiarity, Silicon Debug and/or Functional/Direct Test Verification
• Familiar with assertion-based verification (SVA) & System Verilog language
• Knowledge in Processor verification, FPGA verification and/or Formal verification
• Familiar with Synopsys ICC2/FC (preferred) or Cadence or Magma tools from netlists to GDS is a plus
• Knowledge in high speed implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification) is a plus
• Knowledge of high-speed/low power IP and custom circuit design is a plus
• Familiar with power noise and reliability tools such as Redhawk and Voltus
• Good communication and scripting skills

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E EA License No. 01C4394 • EA Registration No. R21103542 (Ling Kai Jin)

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

Highlights

• AWS + VB + 5 days
• Mechanical/ Electrical
• Bedok/ East
• Escalator/ Elevator/ Lift

Job Responsibilities:

• Lead in-house Testers for lift testing and commissioning of the new installation projects at private commercial, HOB and town council and need for assistance at lift modernization if required
• Manage and ensure that the lift adjustment, testing and commissioning is safe during activities
• Manage on-site and monitor the testing process according to instruction and schedule
• Report Testing progress to Department Head/ Manager
• Manage and ensure safe, high quality, and timely testing of the equipment throughout the testing process
• Prepare lift adjustment training material and provide testing training for the in-house testers skill improvement
• Provide supervision to testers and support technical to troubleshoot testing problem if it is necessary
• Responsible for all the arrangement with 3rd parties such as SPE inspection, TMS inspection and participate RI, Client inspection related with lift testing
• Responsible for the annual calibration test of testing tools and equipments
• Responsible for the internal/ external audit inspection such as ISO 9001, ISO 14001 and ISO 45001 and Jsox etc and also updating the Documents if required
• Assist in project management if required
• Perform any other duties as assigned by Department Head/ Manager

Requirements:

• Minimum Diploma in Engineering
• Must have lift / escalator background or industry
• Able to lead technician

HOW TO APPLY:

Interested applicants, please email to “[email protected]”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Pierre Chung Yih Shern

EA Personnel Reg No: R22111092

Min 2 yrs. of SD agent working experience

Good Laptop/Desktop troubleshooting skillsets

Excellence customer handling skills

Excellence communication skills

Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level

Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.

Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.

Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

Technical Sales Engineer/ Product Sales Engineer

Location: Bukit Batok

Working Days: 5 Days

Working hours : 9am - 6pm

Salary : SGD2,200-3,500 (not inclusive of transport allowance, bonus/commission)

Job Responsibilities:

• Develop a thorough understanding of our complete range of product
• Responsible for preparing quotations, proposal according to customers' requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analyzing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products.
• Industry: Electrical & Electronics

Requirement:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/
• Passion for automation, with creative and adaptive approaches

Skills

• PLC programmable logic controller programming, touch panel, Control And Automation

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

We are seeking a electrical technician to join ourteam in Singapore.

The ideal candidate should

Job responsibilities

- installation of all types of CCTV/ door access ,etc.

- perform service & repair all types of CCTV/door access system.

- perform checking maintenance andtroubleshooting of CCTV/door access.

- Any other duties as assigned by Managerduring project, from time to time.

- perform handover with customer after jobcompleted.

Job requirement

- At least 4 Year(s) of working experience inelectrical work /installation /

- Have ITC/Diploma in Electrical may bepreferred.

- Be mild-tempered

- Be able to work overtime when required.

- Applicant with CSOC/BCSS cert may bepreferred.

- Required language (s): English (written andspoken)

SOLAR PANEL INSTALLATION WORK

Responsibility to take care of the project and lead workers.

High floor sun site work.

Assessing locations to ensure they are suitable for solar panels Measuring up areas for installation Making adjustments to building surfaces so panels fit and are adequately supported Installing and maintaining solar panels on homes, business premises or open land,Solar panel installers are responsible for installing solar panels on roofs, in fields, or other surfaces. They work with a variety of different equipment and materials to ensure that the panels they install are properly connected and functioning correctly. Solar panel installers must have strong technical skills and knowledge of their craft.

Responsibilities:

• Conduct daily preventive & corrective maintenance at remote work site
• Attend emergency site issues and response to site within service level of agreement
• Keep track and prepare service report for preventive & corrective maintenance
• Submit service report on daily basis
• To perform rotating standby duty
• To prepare spare part list and perform stock take of maintenance spares with client
• To liaise with other co-workers / departments and Customer
• Preparation of project submissions, ensure up-to-date documents and final submission of project documentation
• To responsibilities include project planning, co-ordinate, implement and manage security & communications related systems projects

Requirement:

• Diploma/Degree in Electrical & Electronics or IT discipline.
• At least 1 years hands-on experience in maintenance work in CCTV, Card Access Control, Intrusion Detection, ELV System,
• Good knowledge of Electrical / electronic control system
• Good knowledge on communication protocol will be advantage
• Strong execution and troubleshooting skills at remote site work
• Able to work independently with minimum supervision and under pressure
• Willing to work in outdoor environment
• Willing to be on standby on call duty

Responsibilities:

· Design, develop, and maintain .NET-based containerized applications.

· Write clean, scalable code using C# programming language and .NET frameworks (e.g., ASP.NET Core, MVC).

· Collaborate with cross-functional teams to define, design, and ship new features.

· Troubleshoot, debug, and resolve issues in existing software applications.

· Participate in code reviews, ensuring code quality and adherence to coding standards.

Requirements:

· Experience with web development frameworks such as ASP.NET Core or MVC.

· Knowledge of front-end technologies like HTML5, CSS3, JavaScript, and front-end frameworks (e.g., React, Angular, Vue.js).

· Familiarity with databases (SQL Server, MySQL) and ORM frameworks (Entity Framework).

· Understanding of Agile methodologies and software development lifecycle (SDLC).

· Excellent problem-solving skills and strong communication skills.

Qualifications:

· Bachelor’s degree in Computer Science, Engineering, or a related field.

· Proven experience as a .NET Developer or similar role

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for Deep Hole Drilling
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

• 5 days, Alexandra (South-West), walking distance from MRT
• $3100 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• No experience can apply
• On-the-job training is provided

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• No experience can apply. On-the-job training is provided
• Minimum 1 year of relevant experience
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

Location: Tuas West

Working hours: 8am - 5.15pm (Mon - Fri)

• Devising and implementing methods and procedures for inspecting and evaluating the precision and accuracy of products
• Designing and analysing inspection and testing processes, mechanisms, and equipment
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks
• Undertaking root cause analysis of incidents requiring corrective action
• Other ad hoc duties assigned

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

.Net Test Engineer) (6-9 Months Contract)

Working Days & Hours: 5 Day | Mon-Fri: 8.30am-6.15pm
Working Location: AMK@Link (Yio Chu Kang MRT)
Salary Range: $4000-$6000 + AWS + VB

Job Responsibilities:

• Develop and implement test strategies, test plans, test cases, and test scripts for .NET applications.
• Design and execute automated tests using frameworks such as MSTest, NUnit, xUnit.net, or SpecFlow.
• Perform manual testing as necessary, including functional, integration, regression, and performance testing.
• Collaborate with developers and stakeholders to understand requirements and ensure comprehensive test coverage.
• Identify, record, document, and track bugs to resolution using tools like Azure DevOps, JIRA, or similar.
• Establish and maintain CI/CD pipelines for automated testing and deployment.
• Participate in code reviews and provide feedback on code quality from a testing perspective.

Job Requirement:

• Degree in Computer Science, Engineering or it equivalent
• Relevant Experience

Tan Jia Jun | REG No: R23112681

The Supreme HR Advisory Pte Ltd| EA No: 14C7279

• Develop and optimize high-performance trading applications in Java and Rust, focusing on ultra-low latency and efficiency.
• Write, maintain, and enhance complex SQL queries, ETL pipelines, and data extraction tools to support data flows.
• Implement and manage scalable systems and APIs using GraphQL, integrating data across diverse platforms.
• Script and automate workflows in Linux using Shell scripting to streamline processes and improve data processing speeds.
• Collaborate with other engineers and stakeholders to design A/B testing frameworks and benchmarking tools for continuous system improvement.
• Contribute to backend services with Python, Ruby, and JavaScript, ensuring robust, reliable, and scalable code.
• Utilize performance monitoring tools to identify latency bottlenecks and optimize system throughput.
• Manage and deploy code on various environments, ensuring smooth operation and minimal downtime.

Requirements:

• Bachelor's or Master's degree in Computer Science, Software Engineering, or a related field.
• 5+ years of experience in a similar role, ideally within a trading firm or latency-sensitive environment.
• Proficiency in Java, Rust, Python, Linux Shell, SQL, and GraphQL.
• Solid experience in high-performance computing and low-latency optimizations.
• Strong knowledge of data structures, algorithms, and memory management.
• Experience with performance profiling and tuning tools for latency measurement.
• Familiarity with A/B testing frameworks and methodologies.
• Excellent communication skills, including the ability to work collaboratively across teams and functions.
• Experience in distributed computing and data storage solutions.
• Familiarity with Docker, Kubernetes, and DevOps for CI/CD pipelines.
• Knowledge of financial trading and market data.
• Ability to speak business-level Mandarin is a plus, especially for coordinating with stakeholders in China, Taiwan, and Hong Kong

Savita Rai

EA REG NO: R1873418

EA License No:23C2060

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

Role:

Assistant Service Engineer (Electrical Engineering / Up to $3000)

Interested applicants can send your resume to [email protected] and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

• Address: Jalan Bukit Merah
• 5 Days 8.30am to 5.30pm
• $2300 to $3000

Requirements

Nitec or Diploma in Electrical Engineering or Equivalent

At least on year experience in sales/customer service

Electrical Knowledge

Job scope

Your job and responsibilities include support sales personnel for pre-sales activities, proposing solution that suits customer needs & resolve related solution for site preparation, installation, start-up, commissioning, repair and maintenance of Electrical Power System, Structural cabling, Fire suppression system, UPS, Security Access and CCTV Monitoring System etc.

To supervise and oversee the work progress of project sites. This includes attending to site meeting, coordinating with appointed sub-contractors of various services to see to a smooth completion of projects.

You will be assisting the Electrical Service Department in providing technical support to our staff, customers, and dealers.

Prepare and maintain all project management documentation in accordance with company’s best practices.

Planning and monitoring the project to ensure successful completion within planned timeline as well as status of progress-in-work and report all matters related to project and services.

You are required to perform a complete in-house testing of Power equipment’s.

Answer and attend to service calls, fault-finding, repair and troubleshooting of Electrical System and Power equipment malfunction.

Establish and maintain excellent relationships with the customer project team, supplier, sub-contractors, and clients.

Coordinate and liaise with PEs and/or site supervisors on detail drawings, layout planning and understanding of site requirements.

Prepare, submit, and follow up with applications to the relevant authorities or building management where required.

Preparation of electrical products data & engineering drawing in AutoCAD (2D, 3D).

You may be assigned with other job duties and functions as may be instructed from time to time by your superior or the management.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279