About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

As an Analog IC Design Principal Engineer with Marvell, you will be part of a key team designing highly sophisticated CMOS transceiver/SERDES products. Responsibilities would include implementation and verification of circuits such as PLL, DLL, ADC, regulators, amplifiers, TX, RX, CDRs etc. to meet key performance targets and performing design verification using industry standard tools such as Spectre, MATLAB etc.

What You Can Expect

• The ideal candidate should have a deep understanding of analog mixed-signal design with experience in high-speed transceivers.
• Solid understanding and experience of designing analog mixed-signal circuit blocks including PLL, phase interpolator, low jitter clock distribution, Bandgap, biasing circuits, LDO regulators, amplifiers, comparators, high-speed DACs and ADCs, Filters
• In-depth knowledge of analog mixed-signal concepts like mismatch mitigation, linearity, stability, low-power and low-noise techniques
• Experience with Tx/Rx equalization techniques and circuits like de-emphasis, CTLE, DFE
• Experience with high-speed digital circuits (e.g., serializer, deserializer, counters, dividers, etc.)
• Familiarity with CDR architectures and implementations
• Design experience in advanced CMOS technologies, design with FinFet technology
• Hands-on experience with AMS IC development from definition to high-volume production including layout supervision, bench evaluation, correlation, and characterization
• Experience in lab testing of high-speed transceivers

What We're Looking For

• Bachelor Degree with 10 years of experience or Master’s degree and/or PhD in Electrical Engineering and 5+ years of experience.

Job Overview:

Responsible for managing the overall direction, coordination, implementation, execution, control and completion of structured cabling projects. Additionally, ensure projects achieve time, scope, budget, quality, safety and customer satisfaction requirements. Oversee projects from start to finish.

Responsibilities:

• Monitor the day-to-day activities in the field, managing the flow of information, and reporting and tracking issues arising from progress, quality and safety
• Assist in completing the handover plan, ensuring documentation is completed and expectations are met on time and with quality
• Identify issues proactively and work with the team to resolve effectively
• Maintain and develop strong relationship with customers with direct interaction with focus on improving customers’ perception of service, quality, on time delivery, responsiveness, and problem solving.
• Travel to various job sites required.
• Ability to work overtime and weekends when required.
• Effectively manage multiple projects.

Job Requirement:

• Understand technical and construction documents.
• Experience in the construction or technology industries is required

· Proficient with Microsoft Office (Word, Excel, Outlook), Microsoft Project and Adobe Acrobat.

• Excellent communicator verbally and in writing
• Demonstrated management and leadership experience.
• Must be able to perform multiple tasks within deadlines.
• Understanding of general contractor procedures.

☑ Well established Construction company / Main Con / LTA Projects
☑ Salary: $6500 - $9000
☑ Office location: East / island-wide jobsite travel
☑ Working Hours: Mon - Sat, 9am – 6pm

Responsibilities:

• Oversee all phases of diaphragm wall construction projects.
• Develop construction plans and specifications.
• Coordinate with consultants, subcontractors, and suppliers.
• Ensure adherence to safety, health, environmental, and legal regulations.
• Monitor project progress, manage risks, and control costs.

Requirements:

• Bachelor’s degree in Civil Engineering, Construction Management, or related field.
• Min 5 years’ experience in project management, specifically in diaphragm wall construction.
• Strong knowledge of local building regulations, safety standards, and diaphragm wall construction techniques.

Only shortlisted candidate will be notified.

Yang Hui Shan (Sherri)

EA Reg No.: R22106683

☑ Well established Construction company
☑ Salary: $5000 - $5500
☑ Working Location: East region, near MRT
☑ Working Hours: Mon - Fri, 9am – 6pm

Responsibilities:

• Develops and implements HR strategies aligned with business objectives.
• Manages the entire recruitment process, from sourcing to onboarding.
• Fosters positive employee relations, addresses concerns, and handles disciplinary actions.
• Oversees performance reviews, sets goals, and drives employee development.
• Manages payroll, benefits, and work pass administration.
• Designs and delivers training programs to enhance employee skills.
• Oversees office operations, ensuring a safe and efficient workplace.

Requirements:

• Bachelor's degree in Human Resources, Business Administration, or a related field.
• 5-7 years of HR experience, including 2+ years in a leadership role.
• Professional HR certification (e.g., SHRM, CIPD) is a plus.
• Experience in construction industry is preferred.
• Strong knowledge of labor laws and HR best practices.
• Proficiency in managing work pass applications and foreign worker regulations.
• Experience in office administration.

Only shortlisted candidate will be notified.

Yang Hui Shan (Sherri)

EA Reg No.: R22106683

• Assistant the Project Manager in overseeing the project, planning and ensure work is carry out according to master program
• Liaise with the consultant on technical issue and doing coordination on site issues with sub con
• Work with project team and ability to resolve technical issues
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.
• Experience in building projects.

Supervision of works at site in accordance with the design

• Preparation and maintenance of daily report / record

• Check and conduct inspections on works performed by subcontractors / gangs

• Check all construction drawings / sketches received on site and to report any discrepancy to the Project Manager

• Handle all problems arising from the project

• Preparation of progress report for the Client / Consultants

• Work in conjunction with the Project Manager and Safety Supervisor to keep the site safe and tidy

• Co-ordinate the handing over of completed works to the Client / Consultants and completion of the necessary rectification works

• Submission of as-built drawings at the end of the project

• 5-8 mins walk away from Taiseng MRT
• Medical & Dental Benefits
• Career Growth
• Friendly Working Environment

Primary Responsibilities:

• Handle Accounts Payable (AP) and Accounts Receivable (AR) operations.
• Perform bank reconciliations and account reconciliations.
• Manage vendor relationships, including responding to inquiries and resolving discrepancies.
• Conduct banking operations including GIRO, FAST, and TT payments.
• Ensure accurate and timely computation of GST and CPF.
• Prepare and maintain the Fixed Asset Register for all projects.
• Maintain organized documentation and perform ad-hoc accounting tasks.
• Utilize ERP systems such as Hash Micro for daily accounting tasks.

Accounts Payable Task

• Review purchase invoices, ensuring proper documentation and approval before payment.
• Reconcile supplier statements if there are any disputes and to correct the discrepancies.
• Maintain accurate files and documentation in line with company policy and accounting standards, updating payment and vendor files with appropriate file numbers.
• Ensure all accounting records and payments are accurately update in Synergix/Hash micro software.
• Prepare monthly bank reconciliations and maintaining the general ledger in Synergix /Hash micro software on a daily basis.
• Handle and prepare all petty cash claims after obtaining approval from the Finance Manager/ Accounts Manager.

Accounts Receivable Tasks

• Ensure all sales invoices are timely and accurately updated on a daily basis on Synergix/Hash micro software.
• Accurately record customer payments in Synergix/Hash Micro and prepare the debtors' ageing report.
• Assist the Finance Manager in establishing, reviewing and enhancing the internal control processes that govern the finance department
• Participate in the full spectrum of closing activities including processing of accruals and period-end journalisation on a monthly basis

Qualifications:

• Minimum have diploma, advanced/higher/graduate diploma, bachelor’ degree in related field
• With at min. 5 years relevant experiences as Account Executive (experience in construction industry is preferable)
• Knowledge of ERP systems such as Synergix or Hash Micro is preferable
• Strong attention to detail, organizational skills, and ability to manage multiple tasks

Digital Marketing Executive is responsible for developing and executing online marketing strategies to promote a brand, product, or service. Here are some key duties associated with the role:

1. *Campaign Management*: Plan, execute, and manage digital marketing campaigns across various channels, including social media, email, and paid advertising.

2. *Content Creation*: Develop engaging content for websites, blogs, social media, and other online platforms to attract and retain customers.

3. *SEO and SEM*: Optimize website content for search engines (SEO) and manage paid search campaigns (SEM) to increase online visibility.

4. *Social Media Management*: Oversee social media accounts, create posts, engage with followers, and analyze the performance of social media campaigns.

5. *Data Analysis*: Utilize tools like Google Analytics to track and analyze website traffic, campaign performance, and user engagement, making data-driven decisions to improve strategies.

6. *Email Marketing*: Design and implement email marketing campaigns, manage mailing lists, and monitor campaign performance.

7. *Market Research*: Conduct research to understand market trends, customer preferences, and competitors to inform marketing strategies.

8. *Collaboration*: Work with other departments, such as sales, product development, and customer service, to ensure cohesive messaging and branding.

9. *Budget Management*: Monitor and manage the marketing budget to maximize return on investment (ROI).

10. *Staying Up-to-date*: Keep up with the latest digital marketing trends, tools, and best practices to implement innovative strategies.

Responsibilities:

 1. Involved in SDLC processes like requirement

analysis, designing, coding , testing ,releasing, and providing

maintenance

 2. Fixed point auto code generation for production purposes of the system-level testing

 3. Experienced in writing and analyzing systems requirement

documents and usee test cases , preparing test logs and summary

reports

 4. Checking daily WIP calculations and updating the monthly machine status

 5. Identified and addressed technical issues in a timely and efficient manner

 6. Perform wire bond sub-module assembly, set-up, and calibration to meet the

in-house specifications

 7. Conduct testing strength of bonded connections, using testing equipment reports

 8. Designed, implemented, and tested modular components for printer

firmware

 9. Discovered, investigated, and found solutions for problems in OS and

compiler

10. Development on Linux Platform with Embedded C user side of RTOS

11. Assisted QA in developing meaningful testcases.

Excellent numeracy and analytical skills

12.In-depth scientific knowledge

13.Good problem-solving skills

14.Good communication and interpersonal skills

15.Good technical skills

16.Able to work and be stationed overseas

17.Flexible working hours.

Qualifications:

• Master’s degree in a related field
• Proficient in C++ and other object-oriented programming languages
• Analytical and logical thinking
• Strong problem-solving skills
• Ability to work without supervision

Technical skills:

•  Advanced Microcontrollers
•  Analog Circuits
•  Embedded Systems(Embedded C,Keil IDE,Proteus)

Be involved in the planning of civil engineering works.

· To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients.

· Any ad-hoc duties as assigned by the Manager.

· The Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

Job Summary:

· The Civil Engineer assists the Construction Manager in performing engineering duties in planning, designing, and overseeing the construction and maintenance of current upcoming Civil projects.

· The Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

. Flexible working hours

• Minimum 12 years experience in Project management and Certified Project Management Professional with BMI certificate.
• Day-to-day site Inspections with Contractors like P&S, Wet/Dry riser, Hose reel, and Fire Hydrant.
•  To reduce the defect, work was done during the site visit and inspections with the team.
•  Inspected before Shutdown for Water pipes standby Pipes / Pipe Fittings with approved brands and mentioned in the catalog, follow up with Client/ Consultant direction for the Shutdown and Turn ON.
•  Raise RFI to Main Contractor for the non-confirming of Drawing and Schedule Discrepancies
• on-site
•  Ensure to use the approved brands in the approved Catalogue.
•  Before M&E RI and Archi RI, the site will be checked with the contractor and make sure no lapse
• with works. If any delay in work highlight it to the consultant and Client.
•  Monitor the RI documentation like COC, DOC, Buildability Certificate, Fire hydrant, and Hose reel Dry riser reports.
•  Liaise with PUB for the FORM C via Email and on-site Inspection.
•  Monitor and Submit the TOP Documentation like FORM C, submission.
•  Ensure the OMM submission according to the consultant-approved format.
•  Ensure the defect list is sent by main contractors and complete and witness prior
• handover to the client.
•  Manage and coordinate activities of supervisors/ workers engaged in assembly, installation,
• and repair of pipes, fittings, and fixtures of heating, water supply, and waste disposal
• systems for buildings.’
•  Training new supervisors/ workers.
•  Inspects work in progress and completed work to determine conformance to specifications.
•  Inspecting the site for measuring the existing water pipes, valves & pumps to replace.
•  Freehand Sketching / Auto CAD Drawing and coordinating with the draftsman for proper
• drawing submission.
•  Manage BIM Team and coordinate modeler for BIM Model Submission
•  Interpreting the drawings of water pipes, valves, and pumps.
•  Attending meetings and Liaising with the Project Managers, M & E coordinators, Consultants
• & authorities regarding the Project.
•  Prepare and submit progress claim /vo

• Minimum 10 years experience in Project Managment and Certified Project Management Professional from PMI.
• Accountable for the full project lifecycle: develop scopes of work and associated project plans and own the day-to-day operations to ensure that projects remain on track and within budget.
• Lead internal and external status meetings: clearly capture notes, assign action items to team members, and own all necessary follow-up.
• Relay clear and specific expectations, timelines, priorities, challenges, and new developments in detail to key internal and external team members/parties.
• Own daily project plan components, including task estimation, resource allocations,and new work requests.
• Coordinate internal reviews and implementation-related quality assurance efforts.
• Come from a place of perpetual learning, always seeking to improve and optimize processes, develop new ones, and participate in the overall growth of the department and agency.
• Partner with key stakeholders to identify and execute cross-functional goals.
• Work with clarity PPM , or other project management tools.
• Eliminate scope creep by ensuring that projects remain within parameters identified in the scope of work.
• Communicate issues, bug reports, and change orders to leadership.
• Define timelines, budgets, KPIs, deliverables, and milestones; allocate resources
• Draft and present project proposals .
• Negotiate pricing, timelines, services, and terms with vendors.
• Create progress reports and monitor program data to assess efficiency.
• Build strong, lasting relationships and strategic partnerships through exceptional client service; serve as primary point of contact for client communications.

• Minimum 10 years experience in Project Managment and Certified Project Management Professional from PMI.
• Accountable for the full project lifecycle: develop scopes of work and associated project plans and own the day-to-day operations to ensure that projects remain on track and within budget.
• Lead internal and external status meetings: clearly capture notes, assign action items to team members, and own all necessary follow-up.
• Relay clear and specific expectations, timelines, priorities, challenges, and new developments in detail to key internal and external team members/parties.
• Own daily project plan components, including task estimation, resource allocations,and new work requests.
• Coordinate internal reviews and implementation-related quality assurance efforts.
• Come from a place of perpetual learning, always seeking to improve and optimize processes, develop new ones, and participate in the overall growth of the department and agency.
• Partner with key stakeholders to identify and execute cross-functional goals.
• Work with clarity PPM , or other project management tools.
• Eliminate scope creep by ensuring that projects remain within parameters identified in the scope of work.
• Communicate issues, bug reports, and change orders to leadership.
• Define timelines, budgets, KPIs, deliverables, and milestones; allocate resources
• Draft and present project proposals .
• Negotiate pricing, timelines, services, and terms with vendors.
• Create progress reports and monitor program data to assess efficiency.
• Build strong, lasting relationships and strategic partnerships through exceptional client service; serve as primary point of contact for client communications.

• Minimum 12 years experience in Project management and Certified Project Management Professional with BMI certificate.
• Day-to-day site Inspections with Contractors like P&S, Wet/Dry riser, Hose reel, and Fire Hydrant.
•  To reduce the defect, work was done during the site visit and inspections with the team.
•  Inspected before Shutdown for Water pipes standby Pipes / Pipe Fittings with approved brands and mentioned in the catalog, follow up with Client/ Consultant direction for the Shutdown and Turn ON.
•  Raise RFI to Main Contractor for the non-confirming of Drawing and Schedule Discrepancies
• on-site
•  Ensure to use the approved brands in the approved Catalogue.
•  Before M&E RI and Archi RI, the site will be checked with the contractor and make sure no lapse
• with works. If any delay in work highlight it to the consultant and Client.
•  Monitor the RI documentation like COC, DOC, Buildability Certificate, Fire hydrant, and Hose reel Dry riser reports.
•  Liaise with PUB for the FORM C via Email and on-site Inspection.
•  Monitor and Submit the TOP Documentation like FORM C, submission.
•  Ensure the OMM submission according to the consultant-approved format.
•  Ensure the defect list is sent by main contractors and complete and witness prior
• handover to the client.
•  Manage and coordinate activities of supervisors/ workers engaged in assembly, installation,
• and repair of pipes, fittings, and fixtures of heating, water supply, and waste disposal
• systems for buildings.’
•  Training new supervisors/ workers.
•  Inspects work in progress and completed work to determine conformance to specifications.
•  Inspecting the site for measuring the existing water pipes, valves & pumps to replace.
•  Freehand Sketching / Auto CAD Drawing and coordinating with the draftsman for proper
• drawing submission.
•  Manage BIM Team and coordinate modeler for BIM Model Submission
•  Interpreting the drawings of water pipes, valves, and pumps.
•  Attending meetings and Liaising with the Project Managers, M & E coordinators, Consultants
• & authorities regarding the Project.
•  Prepare and submit progress claim /vo

We are looking to hire an IT Engineer to manage our company’s computer systems as well as managing POC deployments and demos to clients. As an IT Engineer, you will be responsible for hardware configurations, installing/upgrading software, managing network systems, system integration and training staff on correct operating procedures.

The Responsibilities:

For this role, the IT Engineer will be involved in IT matters for both internal and external stakeholders.

There will be frequent travels from sites to sites. You will be responsible for maintaining, operating, troubleshooting, and integrating systems. You will be responsible for setting up and testing IT-AV systems in various locations. You will be expected to support/work with our AV Engineers / Project Managers to assist in the diagnosis and rectification of faults to ensure that all systems are fully functional, and that equipment and system downtime are kept to a minimum.

The IT Engineer will provide onsite event supporting alongside manufacturers. The IT Engineer will also be expected to provide UC/IT related advice to clients when required.

From time to time, the IT will need to complete questionnaires, audit surveys (ISO, J-Sox) and supporting documents for audits relating to IT, not limited to our IT infrastructure and our processes.

The IT Engineer is also required to manage our IT assets including but not limited to: recommendation, purchasing, deployment and refreshment. You will be involved in the new hire onboarding and offboarding. You also expected to develop or improve on current IT processes from time to time.

The Pre-Requisites:

• Minimum diploma in Computer Science or Information Technology
• Proven work experience as Desktop Support Engineer or Support Technician.
• Knowledge of IP networking and security, Router, Switch, Firewall, and VPN
• Understanding of network fundamentals such as multicasting/unicasting data transmission
• Excellent analytical, interpersonal and communication skills
• Knowledge with Zoom, Teams & O365 administration and operation
• Knowledge of popular operating systems, software applications, and remote connection systems.
• Ability to travel and work after hours when necessary
• Excellent interpersonal skills
• Good written and verbal communication skills
• Ability to effectively handle stressful situations
• Good customer service
• O365 Certifications will be a plus point
• CCNA Certifications will be a plus point
• ITIL Certifications will be a plus point

Job Description

. Provide hands-on site installation, validation,commissioning and maintenance of electrical equipment

(AC UPS,DC UPS , Batteries, Switchgear and BMS)

. Provide on-site training to the customers

. Develop Service technical documentation

. Create and maintain service information in the company database

. Timely and professionally handle field service calls and issues arising from the field service visits

. Timely complete and submit all required paperwork

. Communicate with the customers to ensure satisfaction and implement any necessary corrective actions

Job Requirements

. Minimum ITE/Diploma or Degree in Engineering ( E&E,Electrical Power)

. Proficient in AutoCAD (Electrical Drawing) and programming will be an advantage

. Proficient in Microsoft Office

. Fresh graduates are welcome to apply ( on the job training will be provided)

Your Team, Your Impact

As a member of the product engineering team, you will tackle complex challenges and play a crucial role in the transfer of new products. You’ll be responsible for envisioning, building, deploying, and managing one or more of our products for mass production. In this position, you will establish test programs, set up hardware, and conduct testing on some of the most advanced industrial test systems across our facilities in Asia. When issues arise with devices or testing, you will perform failure analysis and debugging (both software and hardware) and collaborate closely with various engineering and development teams to resolve these challenges. In addition to addressing testing issues, you will also lead initiatives aimed at cost reduction and continuous improvement. Your contributions will be essential to ensuring the success of our products in the market.

What You Can Expect

• Setup & transfer new product & technology to test locations in Asia for mass production.
• Support & resolve device testing or program related issues.
• Maintain and enhance product test yield & quality of devices in final test, system level test as well as wafer & bump sort.
• Perform cost reduction activities e.g., product yield improvement, test insertion elimination, test time reduction, multiple test site enhancement & wafer sort implementation.
• Continuous improvement for product quality, test efficiency, production throughput & test hardware improvement
• Provide customer return verification support

What We're Looking For

• B.S. in Electronics/Electrical Engineering
• Minimum 2 years of experience in the semiconductor industry
• Basic understanding of product test methodology and implementation
• Knowledge of C, C++ programing language
• Excellent analytical, problem solving and failure debugging skills
• High attention to detail while working under pressure
• Strong communication skills and ability to work effectively with all levels of management and other colleagues
• Short notice travelling is required
• Hands-on knowledge on JMP statistical analysis tool and scripting languages such as Perl and Python are a plus

To apply, kindly submit your application via: Marvell Careers

Your Team, Your Impact

The role is part of our Test Operations and plays a critical role in supporting Product and Test Engineers with test development, product qualification, and manufacturing release. Additionally, it involves collaboration with production and planning teams to optimize spare capacity for revenue generation. The position encompasses the management of Marvell’s test equipment, including testers, handlers, probers, and related hardware, with an emphasis on ensuring operational readiness and driving continuous improvement.

What You Can Expect

• Collaborate with product & test engineers and external vendors to install, configure, buyoff and operate testers, handlers, change kits, probers and hardware items to support NPI Test development projects.
• Own and drive equipment installations, buyoff & operational readiness.
• Develop procedures and documentation for tools handling, setup, conversions to achieve high up time & low operational cost.
• Guide technicians on schematic interpretations, board level troubleshooting and bench setups.
• Work with vendors for tool maintenance, upgrade, repair & calibration works as necessary.
• Review and maintain key spares to achieve high levels of equipment & HW uptime.
• Generate periodic management updates on equipment installation & asset utilization metrics.

What We're Looking For

• BS in EE/ME with minimum 7 years of experience in handling ATEs, Auto Handlers, Change kits, Wafer Probers and associated hardwares.
• System knowledge with hands-on experience in UltraFLEX & Advantest 93K testers.
• Solid understanding in correlations, calibration, golden unit test, preventive maintenance & production release processes.
• Experience in driving root cause analysis and CA/PA to achieve high equipment uptime & stability.
• Work in rotating shifts (day or night schedules) to support project teams across the globe.
• Self-starter, fast learner, good communicator, able to work in matrix organization, juggle multiple tasks.
• Knowledge in ESD controls, GRR, 5S, TPM, OEE, 8D, ISO-9K, MS-Office tools.
• Hands on experience in setup, troubleshoot & running of Hon Precision, Epson and Cohu handlers preferred.

Responsibilities:

• Design, develop, and optimize large-scale data pipelines for efficient data collection, processing, and storage.
• Monitor and maintain data pipelines to ensure high availability and consistency.
• Develop algorithms for processing and analyzing large datasets.
• Utilize distributed computing frameworks like Hadoop and Spark for scalable data processing.
• Design and manage large-scale data storage solutions, including HDFS, Cassandra, NoSQL, and BigQuery.
• Implement robust data management practices to ensure data integrity and security.
• Collaborate with data scientists, analysts, and stakeholders to meet data requirements.
• Communicate complex data concepts effectively to non-technical stakeholders.
• Stay updated on the latest trends and advancements in big data technologies.
• Continuously enhance data infrastructure to improve performance and scalability.

Requirements:

• Bachelor's degree or higher in Computer Science, Data Science, or a related field.
• Minimum of 2 years of relevant professional experience preferred.
• Proven experience in designing and maintaining data pipelines and storage solutions.
• Strong proficiency with distributed computing frameworks, particularly Spark.
• Expertise in data management systems like HDFS, Cassandra, NoSQL, or BigQuery.

What the role is

The company is a dynamic and forward-thinking organization dedicated to empowering individuals and shaping the future of Singapore's workforce. As a statutory board under the Ministry of Education, the company leads the charge in driving the SkillsFuture movement, a national initiative that promotes lifelong learning and skills development. With a strong focus on innovation and collaboration, the company works closely with employers, training providers, and individuals to create a vibrant ecosystem of learning and growth. By offering a wide range of initiatives, programs, and funding schemes, the company enables individuals to unlock their full potential, acquire new competencies, and stay ahead in a rapidly changing job market.

Join the Data Strategy & Analytics Division (DSAD) team to grow Company into a data-mature organization where we use data pervasively and securely to deliver on our business missions:

• Develop and drive Company’s data strategy, including LOIs, data competency, and maintaining strong links with CIO Office
• Develop, implement, and maintain a comprehensive data governance and management framework that complies with WOG requirements
• Implement Lines of Inquiries
• Support data management and exploitation
• Develop MLOps and instill best practices

What you will be working on

As an AI Engineer within DSAD, you will play a pivotal role in developing and enhancing our AI-driven platforms. Your expertise in machine learning, AI, and GenAI applications will contribute significantly to our mission of leveraging advanced technologies to drive innovation and operational excellence. We are looking for a candidate who embodies our core values of integrity, collaboration, and continuous improvement, and who is passionate about harnessing the power of AI to achieve our strategic objectives.

AI and Machine Learning Development

• Develop and enhance machine learning models and AI solutions, focusing on generative and discriminative AI applications
• Test, deploy, and maintain scalable and reliable AI systems
• Implement MLOps principles for efficient integration of machine learning models with data pipelines and infrastructure

Collaboration and Integration

• Work closely with data scientists and engineers to integrate AI into broader system architectures
• Facilitate knowledge sharing and technical training sessions to boost organizational AI competency
• Integrate AI models and systems with APIs and external systems for seamless data and functionality flow

Innovation and Continuous Improvement

• Stay abreast of AI trends to suggest improvements to existing systems and workflows
• Participate in the entire AI model lifecycle management, from data analysis and model building to integration and deployment
• Advocate for continuous improvement in AI practices and applications, aligning with our mission of leveraging advanced technologies

Location:

Near Paya Lebar MRT

Salary:

$5100 to $7500

What we are looking for

• Tertiary qualifications in computer science, statistics, applied mathematics, data management, information systems, information science, or a related quantitative field
• A minimum of three years of experience in AI and machine learning disciplines, including model development, deployment, and lifecycle management
• At least two years of experience in cross-functional team collaboration and supporting AI/GenAI initiatives.
• Proficiency in Python; familiarity with R is a plus
• Strong knowledge of AI frameworks such as TensorFlow, PyTorch, and scikit-learn
• Familiarity with AWS SageMaker, feature stores, model registry, and AWS cloud architecture
• Proficiency in SQL and containerization technologies like Docker and Kubernetes
• Excellent problem-solving skills, strong interpersonal skills, and the ability to work in a team environment
• Confident, energetic self-starter with a commitment to ethics, regulatory compliance, customer service, and business integrity
• Highly adaptable and committed to excellence in a dynamic business environment
• Demonstrated ability to work creatively and collaboratively with both business and IT teams
• Passionate about staying updated on AI advancements and advocating for continuous improvement in AI practices and applications

Candidates without the required qualification but possess the relevant work experience are welcome to apply.

Successful candidates will be offered a 2-year contract.

Reg No: 96C4864

EA License No: R22110839

• Assistant the Project Manager in overseeing the project, planning and ensure work is carry out according to master program
• Liaise with the consultant on technical issue and doing coordination on site issues with sub con
• Work with project team and ability to resolve technical issues
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.
• Experience in building projects

Responsibilities:

• Design, develop, and optimize large-scale data pipelines for efficient data collection, processing, and storage.
• Monitor and maintain data pipelines to ensure high availability and consistency.
• Develop algorithms for processing and analyzing large datasets.
• Utilize distributed computing frameworks like Hadoop and Spark for scalable data processing.
• Design and manage large-scale data storage solutions, including HDFS, Cassandra, NoSQL, and BigQuery.
• Implement robust data management practices to ensure data integrity and security.
• Collaborate with data scientists, analysts, and stakeholders to meet data requirements.
• Communicate complex data concepts effectively to non-technical stakeholders.
• Stay updated on the latest trends and advancements in big data technologies.
• Continuously enhance data infrastructure to improve performance and scalability.

Requirements:

• Bachelor's degree or higher in Computer Science, Data Science, or a related field.
• Minimum of 2 years of relevant professional experience preferred.
• Proven experience in designing and maintaining data pipelines and storage solutions.
• Strong proficiency with distributed computing frameworks, particularly Spark.
• Expertise in data management systems like HDFS, Cassandra, NoSQL, or BigQuery.

Essential Functions (Responsibilities):

- Develop and grow key accounts in the Oil & Gas sector, Pharmaceutical and other industrial sectors contribute company growth objectives in Singapore.

- Provide technical sales support and consultation to clients for the sale of electrical products in order to develop business opportunities and penetrate clients.

- Perform all aspects of selling to maintain and develop new or existing customers including: take-offs, project quotations, closing orders, preparation of submittals and resolving customer problems.

- Meet or exceed budgeted sales and gross margin targets with assigned accounts.

- Focus on identifying specific technical requirements of customers while simultaneously collecting commercial and competitive information associated with each account

- Cultivate effective long-term relationships at all levels of the customer organization.

- Attain expert knowledge of products, electrical goods market and competition.

Qualifications/Requirements:

- Formal Electrical Engineering qualification (Diploma/Certification)

- Strong technical and commercial background.

- Minimum 1 to 2 years of proven sales experience to industrial customers

- Electrical product knowledge

- Very strong consultative selling, interpersonal, and negotiation skills

- Resourceful and results-oriented.

-Highly motivated, self-confident, self-starting work ethic with good networking abilities

- Team player who works well in global teams

- Good command of spoken/written English

- Have own car

** Package up to 55K a year **

What the role is

The company is a dynamic and forward-thinking organization dedicated to empowering individuals and shaping the future of Singapore's workforce. As a statutory board under the Ministry of Education, the company leads the charge in driving the SkillsFuture movement, a national initiative that promotes lifelong learning and skills development. With a strong focus on innovation and collaboration, the company works closely with employers, training providers, and individuals to create a vibrant ecosystem of learning and growth. By offering a wide range of initiatives, programs, and funding schemes, the company enables individuals to unlock their full potential, acquire new competencies, and stay ahead in a rapidly changing job market.

Join the Data Strategy & Analytics Division (DSAD) team to grow Company into a data-mature organization where we use data pervasively and securely to deliver on our business missions:

• Develop and drive Company’s data strategy, including LOIs, data competency, and maintaining strong links with CIO Office
• Develop, implement, and maintain a comprehensive data governance and management framework that complies with WOG requirements
• Implement Lines of Inquiries
• Support data management and exploitation
• Develop MLOps and instill best practices

What you will be working on

As a Data Engineer within DSAD, you will play a pivotal role in managing and optimizing data pipelines, ensuring the seamless flow and integrity of data across our organization. Your expertise in data pipeline management, automation, MLOps, data governance, and infrastructure architecture will contribute significantly to our mission of leveraging data to drive innovation and operational excellence. We are looking for a candidate who embodies our core values of integrity, collaboration, and continuous improvement, and who is passionate about harnessing the power of data to achieve our strategic objectives.

• Data Pipeline Management, Automation, and MLOps Proficiency
  Manage and optimize multi-stage data pipelines for various use cases, from data acquisition to consumption
  Automate data preparation and integration tasks using innovative tools and techniques
  Apply MLOps principles to integrate machine learning models efficiently with data pipelines and infrastructure
• Data Governance, Cataloging, and Collaboration
  Work closely with data governance teams to ensure data is accurately cataloged and available for governed reuse
  Collaborate with AI engineers to optimize data solutions for machine learning projects, focusing on data flow and accessibility
• Infrastructure Architecture and Data Modeling
  Design and manage scalable data infrastructure using cloud services like AWS
  Develop efficient data models and pipelines for large-scale data sets, ensuring data quality and availability
• Data Quality Assurance, Documentation, and Continuous Improvement
  Lead initiatives to establish standards for data accuracy and reliability
  Maintain comprehensive documentation on data architectures and management practices
  Stay updated on data engineering advancements, advocating for and implementing improvements
  Facilitate knowledge sharing and technical training sessions to enhance organizational data competency

Location:

Near Paya Lebar MRT

Salary:

$4200 to $6000

What we are looking for

• Tertiary qualifications in computer science, statistics, applied mathematics, data management, information systems, information science, or a related quantitative field
• A minimum of six years of experience in data management disciplines, including data integration, modeling, optimization, and data quality
• At least three years of experience in cross-functional team collaboration and supporting data management/analytics initiatives
• Demonstrated ability to work creatively and collaboratively with both business and IT teams
• Strong interpersonal skills with the ability to engage and earn the respect of stakeholders at all levels
• Confident, energetic self-starter with a commitment to ethics, regulatory compliance, customer service, and business integrity
• Highly adaptable and committed to excellence in a dynamic business environment

Candidates without the required qualification but possess the relevant work experience are welcome to apply.

Successful candidates will be offered a 2-year contract.

Reg No: 96C4864

EA License No: R22110839

Supervision of works at site in accordance with the design

• Preparation and maintenance of daily report / record

• Check and conduct inspections on works performed by subcontractors / gangs

• Check all construction drawings / sketches received on site and to report any discrepancy to the Project Manager

• Handle all problems arising from the project

• Preparation of progress report for the Client / Consultants

• Work in conjunction with the Project Manager and Safety Supervisor to keep the site safe and tidy

• Co-ordinate the handing over of completed works to the Client / Consultants and completion of the necessary rectification works

• Submission of as-built drawings at the end of the project