The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Task:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 7 years of relevant work experience in Diffusion Wet / Wet Etching Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

This role is similar to a (junior) chief of staff to the Co-founder (COO&CFO) of a Pre-A startup. Notwithstanding the job description listed below, your role would be anything and everything that the Co-founder is currently in charge of. DO NOT apply if you want a well defined routine, job scope, and if you prefer to know what will happen in the coming month. Also do not apply if you only want to do sales, strategy, and other "high level" stuff. There will be a mixture of everything that is not too technical (everyone else in the company is highly technical) and I need someone to offload my work. There will be times when you have to work on construction sites like everyone else in the company. It is hot, dirty, dusty, and overall not a pleasant experience. We do anything and everything necessary based on the ever changing situation. Either engineers with a strong business acumen or business school graduates with reasonable engineering interest can apply.

Fabrica AI is creating a future where ideating and developing a robot for any task takes days, not years. We believe that by training end to end controls in simulation with reinforcement learning and above that iterating hardware designs, we can automate the whole development process.

To validate our approaches for our AI system and to collect data, we invented an automatic tile grouting robot that boosts productivity by up to 5x and are piloting it on construction sites in Singapore managed by Woh Hup, BHCC, Gin Chia, Soilbuild, Chan Rong Fen, and Dragages. Tile grouting is the process of filling up the gaps between tiles after the tiles have been laid. We invented a patented robot that is able to automatically grout and clean tile gaps with only a press of a button.

We’ve raised over 3m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, ffVC, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://drive.google.com/file/d/1SEj-CUkHErY332Xbn8t8h_kzUA562gRe/view?usp=sharing

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

1. Assisting with the recruitment process, including posting job openings, reviewing resumes, and conducting initial candidate screenings.
2. Coordinating and scheduling interviews with job applicants and hiring managers.
3. Assisting in onboarding new employees, including paperwork and orientation.
4. Maintaining and updating employee records and databases.
5. Assisting with HR-related communications, such as preparing HR documents and announcements.
6. Supporting HR team with various administrative tasks.
7. Assisting in the development and implementation of HR policies and procedures.
8. Conducting research on HR trends and best practices.
9. Assisting in organizing HR-related training and development programs.
10. Participating in special HR projects and initiatives as assigned.
11. Scheduling and joining meetings with prospective clients, investors, and partners
12. Market research for expansion overseas
13. Accounting and purchasing
14. Scouting for new opportunities, writing proposals for them, and pushing fabrica out there
15. Visiting industry trial sites, giving appropriate feedback to product development team
16. Speaking to industry players, ground workers, understanding the process of tile grouting to help us shape our solution, especially from an operational point of view
17. Connecting manufacturers and our product team to build and iterate on our prototype, creating new avenues for manufacturing at scale, manufacturing for reliability
18. Website and other marketing/public relations management
19. Any other operational duties

A great candidate would possess the following:

• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Growth mindset driven

Senior Data Engineer

Institution: National Healthcare Group
Family Group: Administration

The Senior Data Engineer leads the creation, maintenance, and strategic development of our advanced data analytics infrastructure, which is vital to the hospital's data-driven decision-making processes. This role oversees the acquisition, storage, retrieval, and optimization of data from various sources to support clinical, operational, and research initiatives. The position directly supports the work of the Group Chief Data Officer (GCDO) for Data Analytics and provides leadership to the data engineering team.

Leadership and Management:

• Lead and mentor a team of data engineers, fostering their professional growth and ensuring high-quality deliverables.

• Develop and implement best practices, standards, and architectural decisions for data engineering processes.

• Collaborate with cross-functional leadership to align data engineering strategies with organizational goals.

• Drive innovation in data engineering practices and technologies within the organization.

Strategic Planning and Execution:

• Develop and execute the long-term vision for the data engineering function, aligning with the institution's overall data strategy.

• Identify opportunities for process improvements and automation to enhance team efficiency and data quality.

• Manage resource allocation and capacity planning for data engineering projects.

Data Sourcing and Collection:

• Oversee the identification and evaluation of source systems.

• Guide the team in gathering requirements on frequency, volume, and types of data.

• Ensure robust data privacy and compliance measures are in place, liaising with legal and compliance teams as necessary.

Data Ingestion and Architecture:

• Lead the design and implementation of scalable, efficient data ingestion pipelines using Informatica IDMC, Spark, and Python.

• Establish architectural standards for reliability and fault tolerance of ingestion pipelines.

• Oversee data transformation strategies during ingestion.

• Manage vendor relationships and collaborations for data ingestion projects.

Data Lake Management and Integration:

• Direct the structuring of data in the DataBricks Lakehouse to ensure optimal usability and performance.

• Oversee data partitioning, indexing, and archival strategies.

• Lead integration efforts with DataBricks Lakehouse, ensuring seamless accessibility for data scientists and analysts.

Data Quality, Validation, and Security:

• Establish comprehensive data quality frameworks and validation protocols.

• Implement and oversee security measures, including access controls, data encryption, and regular audits.

• Collaborate with compliance officers to ensure adherence to healthcare data regulations.

Performance Management and Optimization:

• Set and monitor KPIs for data ingestion pipeline performance.

• Lead optimization efforts to meet and exceed SLAs.

• Conduct regular performance reviews and implement improvement strategies.

Strategic Collaboration and Communication:

• Serve as the primary liaison between the data engineering team and other departments, including data science, business analytics, and IT.

• Present data engineering strategies, progress, and challenges to senior management.

• Foster a culture of knowledge sharing and continuous learning within the team.

Qualifications:

• 8+ years of experience in data engineering, with at least 3 years in a leadership role.

• Strong technical expertise in data engineering tools and technologies, including Informatica IDMC, Spark, Python, and DataBricks.

• Excellent communication and interpersonal skills, with the ability to influence and collaborate across all levels of the organization.

Nice to Have:

• Proven track record of successfully leading data engineering projects in a healthcare setting.

• Advanced knowledge of healthcare data standards, privacy regulations, and compliance requirements

Hitachi Asia Ltd., a subsidiary of Hitachi, Ltd., serves as the regional headquarters for seven countries across Southeast Asia (Indonesia, Malaysia, Myanmar, Philippines, Singapore, Thailand, and Vietnam). We are constantly increasing our presence through our forays in information & telecommunication systems, power systems, social infrastructure & industrial systems, electronic systems and equipment, construction machinery, high functional materials and components, automotive systems, and home appliances, among many more.

Position Overview:

We are seeking a highly motivated and skilled IT Infrastructure Engineer to join our team. The successful candidate will play a critical role in system implementation, ongoing maintenance, and support of existing systems, as well as providing proposals for new projects. This role will primarily serve a key customer, a prominent Japanese bank in Singapore.

Job Duties:

• System Implementation: Lead end-to-end system implementation projects, including planning, design, setup, testing, and system release.
• System Maintenance & Support: Provide troubleshooting and issue resolution for existing systems to ensure smooth operations.
• Project Proposal & Requirements Gathering: Collaborate with clients to understand requirements, evaluate solutions, and prepare detailed project proposals.

Key Qualifications:

• Education: Bachelor’s degree in computer science, IT Engineering, or a related field.
• Experience: - 8+ years in IT projects, particularly within banking or financial institutions. - 5+ years of hands-on experience in system infrastructure implementation. - 3+ years of experience working with major banks in Japan is highly preferred.
• Technical Expertise: Strong knowledge of system infrastructure, including Windows OS, Oracle Database, VMware, and other system operation products. Familiarity with JP1 or similar enterprise-level system operation tools. Proficient in programming and scripting languages (e.g., WinBatch, PowerShell).
• Language Proficiency: Advanced skills in listening, reading, writing, and speaking in both English and Japanese language to effectively communicate with clients and teams.
• Customer-Focused: Strong customer service orientation, with the ability to understand and address client needs effectively.
• Additional Skills: Ability to diagnose and resolve software-related issues in collaboration with product support teams. Strong communication and negotiation skills, with experience in working cross-functionally with internal and external IT teams.

· Drive Technical and Maintenance support to all operating facilities in instrumentation and control systems, including ICSS / DCS / PLC

· Ensure the installations are maintained and managed with respect to regulatory requirements

· Actively contribute with technical and advisory support to Operations Managers / Maintenance Managers and offshore facilities in terms of Instrumentation and Control Systems

· Actively contribute to incident investigation and provide technical support to Emergency Response team as and when required

· Participate in planned shutdown as and when required

· Review and provide the engineering solutions for Management of Change Request from Facilities as per procedure

· Review the Shutdown / Breakdown Reports and verify / carry out Root Cause Analysis

· Update Lesson Learned Register based on Management of Change Request, Shutdown / Breakdown Reports review, Survey / Audit Reports etc.

· Provide in-house training for the offshore team as and when required

· Carry out competency evaluation for onboard E&I Supervisors and Instrument technicians as requested

· Provide budget requirements in terms of maintenance, long term plan and surveys

· Provide input for new project bids and variation orders, based on Lessoned Learned from operating facilities

· Act as a mentor and resource for new employees and less experienced colleagues

· Continuously make suggestions for improvements in all spheres of influence

· Additional responsibilities as required

JOB DESCRIPTION:

Role Purpose:-

The Project Engineer is tasked with planning and executing specific job tasks or work scopes on the FPSO project.

The complexity and scale of these scopes can be vary based on the Project Engineer's level of senority.

Key Accountabilities

Project managment:

• Assist the Area Manager in overseeing and managing the EPC scopes of the project. Resposibilies may include managing various work scopes or "mini-projects" within each phase to ensure the overall success and timely delivery of the project.
• Collaborate with multidisciplinary teams to ensure that project activities and deliverables are executed and delivered according to the schedule.

Project planning and monitoring:

• Create comprehensive plans and timelines for the different stages of the project, including contributions to the overall project schedule development.
• Monitoring the overall project schedule and its work scopes is crucial, including expediting: 1. Engineering progress and tracking the issuance of deliverables to support related functions such as procurement and construction. 2. Procurement activities and providing support for procurement processes, purchase orders, and package engineering. 3. The timely review of engineering for package engineering and monitoring the progress of key vendor date. 4. Construction activities and ensuring the on-time delivery of essential fabrication drawings and equipment by the required dates.

Technical knowledge

• Participate in design and technical reviews, as well as workshops, to develop action registers that monitor the implementation and closeout status.

Communication and stakholder management

• Notify other functions of potential delays abd develop plans to mitigate them.
• Regularly report on project status to the project management team and aid in producing progress reports for stakeholders.

JOB REQUIREMENT:

• Bachelor’s degree in Engineering or equaivalent technical discipline.
• At least 2-4 years of experience in Oil and Gas industry and/or in EPC projects or equivalent
• 4-10 years of experience in Oil and Gas industry.
• 4-10 years of experience in EPC projects or equivalent.
• Knowledge of project management principles.
• PMP certificate is desired
• Technical knowledge in FPSOs or other oil ad gas facilities.

Responsibilities:

• Design, develop, and test electronic circuits for embedded systems.
• Develop and debug embedded software using C/C++ or other relevant programming languages.
• Implement software solutions and design interfaces to support robot integrations
• Perform circuit simulations and PCB layout design.
• Optimize power consumption, performance, and reliability of embedded systems.
• Collaborate with cross-functional teams to define system requirements and specifications.
• Conduct design reviews, testing, and validation of hardware and software.
• Provide technical support and troubleshooting for product development and production teams.
• Assist robot field testing, evaluate the performance of our systems, and create performance reports.
• Contribute to overall architecture design and documentation.

Requirements:

Technical qualifications:

• Background in Computer Science/Electrical Engineering/Mechanical Engineering with focus in robotics, mechatronics, or related fields
• Proficient in ROS or C++ or Python and embedded programming
• Strong knowledge of robotic platforms, robotics hardware (sensors, actuators), and networks (Ethernet, Ethercat, CAN, Modbus, RS232, etc)
• Experience in circuit design, PCB layout, and debugging using tools like oscilloscopes, logic analyzers, and multimeters.
• Familiar with Linux platform, its configuration, and command line operations

Responsibilities:

• Design, develop, code, and document larger modules as part of firmware projects and lead a firmware project.
• Rich experience on embedded SoC software development and debug environment setup.
• Work with relevant architects, software and hardware teams to finalize the system level solutions and modularize the firmware development works.
• Utilize low level C coding techniques when developing codebases, follow coding standards and follow standard development best practices.
• Read schematics, utilize oscilloscopes, digital analyzers, and other test equipment in the development and debugging of firmware designs.
• Have fundamental knowledge about the operating system and its common drivers, especially understanding basics of RTOS.
• Have fundamental knowledge about inter-chip communications in heterogenous processor environment, and able to use OpenAMP or RPC such techniques.
• Understand storage devices/controller (i.e. SAS, SATA etc.) driver, protocols and firmware design is a plus.
• Understand power management at system level and OS power management handling is a plus, especially familiar with PMIC firmware.
• Understand the virtualization techniques on server environment is a plus.

Requirements:

• Minimum degree in Bachelors Engineering in Computer Science/Engineering, Electrical Engineering, related field or equivalent experience on embedded system.
• Minimum of 3-5 years of experience
• Experience with implementing embedded operating systems such as Linux, FreeRTOS on target hardware
• Demonstrated experience with C/C++/assembly language programming.
• Demonstrated experience with ability of problem analysis and solving.
• Familiar with RISC-V/ARM ISA is a plus.
• Good team player and be able to prioritize the tasks and delivery the modalized development work.

OTSAW Digital is seeking creative, energetic well-rounded Product Development Engineer to work in the field of autonomous robot technology.

You will be responsible for integrating and testing software solutions in simulation and on the robot. We are looking for engineers who are interested in tackling challenging problems for our robots.

At OTSAW Digital, we want people with passion. We want innovators. We want people who can collaborate and bring us a creative future. So, if you are passionate about working in a startup, want to solve hard problems and make cool robots with us, please apply.

Responsibilities:

• Oversee and in charge of technical matters (both Software and Hardware) for assigned product line.
• Support Commercial Team in technical evaluation of new projects requirement, translating customer needs into product design and development requirements.
• Conceptualize and prototype new product ideas.
• Design and conduct validation test for new product functions, features.
• Fine-tuning product designs until they are ready for production.
• Delivering product specifications and procedures to the manufacturing team for production purposes.
• Delivering product specifications to the commercial team for sales purposes.
• In charge of troubleshooting and correction for technical issues escalated to R&D department.
• Coordinate and manage Development projects for assigned product line.

Requirements:

• 2-3 years working experience in relevant fields.
• Min. education qualification: Bachelor Degree in Robotics Engineer, Mechatronics, Computer Engineer, Electrical Engineer, Mechanical Engineer or other Engineering related course
• Strong foundation in Electrical, Mechanical and Software System are preferred
• Demonstrate deep interest & understanding in relevant domain of interest
• Experience in developing on actual physical robot is a plus
• Experience in any of the following C++, Python, ROS, JS, Git, Autodesk Eagle, Autodesk Inventor is a plus

As an Associate Engineer in Product Support Organization, within the Aftermarket Products & Services (APS) Business Unit, this role is responsible for the technical activities that support the repair and refurbishment of goods. This includes the completion of the quality of goods meeting schedule timelines.

The Associate Engineer ensures smooth repair and refurbishment of goods:

• Repair and refurbishment support: Ensure assemble of goods with accuracy
• On time delivery: completion of work order within the scheduled time frame

Responsibilities

• Create repair and/or refurbishment work orders.
• Expedite support and coordinate the replenishing of materials and work with materials planners to proactively solve raw material issues.
• Ensure materials are issued correctly as per work order.
• Perform Troubleshooting and Diagnostic based on Troubleshooting Guide
• Perform bonding and data collection based on Standard Work Instruction and Test Procedures (~2 - 4 hours standing and using microscope)
• Disassembly, assembly and Testing of Mechatronics Assemblies module to Standard Work Instruction and Test Procedures.
• Update system records in a timely upon completion.
• Support Agility Training to all Product Lines based on Supervisor’s assignment.
• Performs other duties as assigned.

Qualification

• Minimum qualification of Vocational Certificate/NITEC in Electrical or Mechanical Engineering
• Minimum experience of 2 years in the semiconductor/ manufacturing industry
• Basic knowledge of wire bonding and/or die bonding technology is preferred
• Able to work independently to troubleshoot and analyze machines and spares issues when needed
• Possess good written and communication skills
• Proficient in Microsoft Office (Excel, PowerPoint and Words)

Company Overview

Founded in 1951, Kulicke and Soffa Industries, Inc. (NASDAQ: KLIC) specialize in developing cutting-edge semiconductor and electronics assembly solutions enabling a smarter and more sustainable future. Ever-growing range of products and services supports growth and facilitates technology transitions across large-scale markets.

Please refer to the website for more details: www.kns.com.

Equal Opportunity

Kulicke & Soffa recruits on the basis of merit (such as skills, experience or ability to perform the job), regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Summary:

We are seeking a highly skilled and motivated medical device Product Development Engineer to join our dynamic team. The successful candidate will be responsible for the design, development, and maintenance of software products that meet regulatory requirements for medical devices. This role requires a good understanding of both software engineering and medical device regulations, ensuring our products are safe, effective, and compliant.

Key Responsibilities:

• Collaborate with software development team to design, develop, and maintain software applications intended for use as medical devices.
• Collaborate with cross-functional teams, including clinical, regulatory, quality, and marketing to implement product requirements and specifications.
• Ensure software design complies with relevant medical device regulations and standards (e.g., IEC 62304, ISO 13485, HSA guidelines).
• Work closely with regulatory affairs to ensure software products meet all necessary regulatory requirements and obtain required certifications and approvals.
• Prepare and maintain documentation required for regulatory submissions and audits.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software development, preferably in the medical device industry.
• Experience with regulatory compliance for medical devices.
• Familiarity with software validation and verification processes.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Mechanical Engineering
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• The Research Engineer will work closely with the Principal Investigator on several research projects on using machine learning in chemical and optimization problems
• The Research Engineer will help to develop machine learning models for both theory and applications in advanced control systems

Job Requirements

• B.S. or M.S degree in a relevant area, e.g., Chemical Engineering, Control Engineering, Computer Science, Chemistry, etc.
• Experienced in machine learning, optimization and programming languages (e.g., python, Matlab, C++, etc)
• Any experience with 1) advanced control, 2) machine learning theory and applications, and 3) chemical engineering and chemistry is a plus

Working location: Thomson

Job Summary:

This role is responsible for overseeing the testing and commissioning of electrical equipment on-site, ensuring adherence to project specifications and safety standards. The successful candidate will play a key role in verifying the proper installation and functionality of electrical systems, collaborating with clients and contractors to achieve successful project completion.

Key Responsibilities:

• Directly supervise and coordinate on-site testing and commissioning activities for electrical equipment, ensuring compliance with relevant codes, standards, and project requirements.
• Review, prepare, and submit comprehensive site acceptance test reports, documenting test procedures, results, and any identified discrepancies. Maintain accurate records of all testing and commissioning activities.
• Thoroughly review single-line diagrams, electrical schematic drawings, and other technical documentation to ensure proper system understanding and identify potential issues.
• Conduct and/or assist in electrical equipment installation inspections to verify compliance with design Actively participate in site activities and meetings involving clients, contractors, and other stakeholders, providing technical expertise and ensuring effective communication.
• Identify and troubleshoot electrical system issues during testing and commissioning, implementing corrective actions as needed.
• Enforce strict adherence to all safety protocols and procedures during testing and commissioning activities to ensure a safe working environment.
• Undertake tasks and assignments as directed by the Commissioning Lead, prioritizing effectively and meeting deadlines.

Job Requirements:

• Degree in Electrical Engineering
• Minimum of 2 years of local working experience in electrical testing and commissioning within a relevant industry (e.g., construction, infrastructure, power generation).
• Solid understanding of electrical principles, codes, and standards (e.g., IEC, IEEE, BS).
  Proficiency in interpreting single-line diagrams, electrical schematics, and other technical drawings.
  Practical experience in testing and commissioning MV/LV electrical equipment (e.g., switchgear, transformers, protection relays, cables).

*Able to start work within short notice will be highly advantageous.*

Please be notified that only shortlisted candidates will be notified

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: YEO AHN AHN

EA Personnel No: R22109014

EA License No: 21C0845

• Position : Service Technician or Engineer-HVAC/ACMV
• Working hours : Monday to Friday | 8.30am to 5.30pm
• Location: Office in Boon Lay-Islandwide
• Salary (commensurate with experience) : Up to $4200 Basic + $50 Transport allowance + $50 mobile + Minimum 2 months Variable Bonus (max up to 5 MONTHS BONUS) + 16 days Annual Leaves + Medical Benefits + Overtime
• Duration : Permanent
• Industry : Refrigerating, Air-conditioning & Ventilation Machinery - MNC

Main responsibilities :

• Able to carry out corrective and preventive maintenance for chillers and related equipment
• To perform chiller overhaul – dismantle & re-assemble the major components
• Coordination with vendors and contractors, ensure all works carried out in accordance with specified quality and EHS standards
• Liaising with customers to resolve the chillers issues
• May be assigned to lead a team of technicians to fulfill jobs assigned – for engineer
• Assist or involve in schedule planning & prepare works related reports – for engineer
• Any other duties as deemed necessary from times to times

Requirement:

• ITE / Diploma in Mechanical, Electrical, Electronic Engineering or equivalent
• Min 2-5 years of relevant experience in Machinery overhaul
• Willing to performing physical activities, such as climbing, lifting, balancing, walking, stooping, and handling of materials.

Email to [email protected]

Do visit Search Personnel Pte Ltd for more job listings.

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Position : Service Engineer/Manager-Chillers/HVAC/ACMV
• Working hours : Monday to Friday | 8.30am to 5.30pm, Saturday half day 8.30am-12.30pm (on standby when required only)
• Location: Tuas
• Salary (commensurate with experience) : Up to $5000 Basic + Petrol reimbursement up to $400 per month, + Transport allowance/reimbursement + Bonus + Medical Benefits
• Duration : Permanent
• Industry : Heat Exchange Equipment

Main responsibilities :

• Perform servicing and maintenance on chiller
• To perform chiller overhaul – dismantle & re-assemble the major components
• Coordination with vendors and contractors, ensure all works carried out in accordance with specified quality and EHS standards
• Liaising with customers to resolve the chillers issues
• May be assigned to lead a team of technicians to fulfill jobs assigned – for engineer
• Assist or involve in schedule planning & prepare works related reports – for engineer
• Any other duties as deemed necessary from times to times

Requirement:

• ITE / Diploma in Mechanical, Electrical, Electronic Engineering or equivalent
• Min 2-5 years of relevant experience in Machinery overhaul
• Able to Perform servicing and maintenance on chiller
• Able to Repair and troubleshooting on chiller will be an advantage

Email to [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Position : Sales Engineer -Chillers/Heat Exchange
• Working hours : Monday to Friday | 8.30am to 5.30pm
• Location: Tuas
• Salary (commensurate with experience) : Up to $4200 Basic + Petrol reimbursement up to $400 per month, + Transport allowance/reimbursement + Bonus + Medical Benefits
• Duration : Permanent
• Industry : Heat Exchange Equipment

Main responsibilities :

• Submit plan and execute well-defined sales strategies to achieve targets
• Develop and maintain good rapport with existing customers;
• Promptly and professionally attend to customers’ enquiries and requests and provide technical advise on both existing and new products or systems;
• Supports sales opportunities through presentations, calling and visiting customers and prospects, needs identification with active follow-ups;
• Ensuring smooth service operation efficiency for customers with sales and operations team
• Investigating and resolving customers’ issues with relevant departments when necessary
• Acquire new customer accounts;
• Assist in preparation of proposals and quotation administration;
• Contribute creative alternative ideas to help maximize sales opportunities;
• Participate in marketing, advertising, promotional and publicity activities in line with corporate and product strategies;
• Gather information on market demand, competition and latest product developments
• Conduct periodic sales forecasts;
• Prepare weekly sales/contact reports.

Requirements:

• Diploma/Degree in Mechanical/Marine Engineering;
• Experience in Sales preferred but fresh graduates are welcome to apply as full training is provided
• Possess Class 3 driving license (with own transport preferred)
• Resourceful, proactive self-starter, positive attitude, performance oriented, able to work independently but also a team player;
  Must be able to read and write fluently in English
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

The Job

• Develop timing/power/noise characterization flow for advanced node memory compiler.
• Strong focus on design automation for SRAM compiler, big data analysis and design verification.
• Develop memory analysis flow for PPA check.
• Design and develop the layout for integrated circuits according to electronics engineering principles, using software to create design schematics and diagrams.

The Talent

• Bachelor's Degree (with min. 8 years of relevant industry experience) /Masters Degree (with min. 6 years of relevant industry experience)/ PhD in Electrical and Electronic Engineering/Computer Engineering/Computer Science.
• Knowledge of SRAM/ROM memory functionality and high speed, low power memory design architecture.
• Experience in spice simulation and understand CMOS layout view, Verilog coding is preferable.
• Proficient in script programming with Perl or Python3.

Job Title: IT Infrastructure & Support Engineer (ID7029)
Location: Clementi
Working Hours: Mon to Fri 830am-6pm
Salary: $4700
Benefits: AL 15days, performance bonus

As a key member of the IT team, the candidate will be responsible for overseeing and optimizing infrastructure systems across both local and overseas sites.

Key Responsibilities:
• Manage and configure infrastructure systems (Active Directory, data centers, telephony, video conferencing, etc.) and network devices (firewall, VPN, wireless, etc.).
• Ensure automatic system backups, implement disaster recovery plans, monitor resource usage, and apply patches as needed.
• Coordinate with external vendors to ensure Service Level Agreements (SLAs) are met.
• Develop and maintain technical documentation such as admin and user guides.
• Provide technical support to local and international branches, ensuring LAN/WAN security.
• Source products, solutions, and vendors for project needs.
• Offer L1/L2 support and contribute as a team lead or member in various IT projects.

Requirements:
• Singaporean/ PR only.
• Diploma or Degree in IT/Computer Science, or a CCNA certification.
• Proficiency in English and Mandarin is required to liaise with overseas stakeholders.
• At least 1 year of experience in enterprise networking (WAN/LAN, VPN).
• Proficient in managing Microsoft Server, Microsoft 365, and Google Suite.
• Solid knowledge of TCP/IP, DNS, DHCP, Proxy, and Firewall setup.
• Familiarity with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless controllers.
• Strong understanding of CyberRisk, CyberSecurity, and PDPA.
• Experience with Veeam, VMware, UNIX/Linux, API/Web programming, and database management is a plus.

Job Summary:
We are seeking an experienced Software Testing Engineer to join our dynamic team focused on developing cutting-edge medical device software. The successful candidate will be responsible for designing, executing, and maintaining comprehensive testing processes to ensure our software meets the highest standards of quality, safety, and regulatory compliance. This role requires a deep understanding of software testing and compliance.

Key Responsibilities:

• Design, develop, and execute test plans, test cases, and test scripts for software applications intended for use as medical devices.
• Collaborate with software developers and cross-functional teams to identify, document, and resolve software defects.
• Conduct various types of testing, including functional, integration, system, performance, and regression testing, to ensure software quality.
• Prepare and maintain comprehensive testing documentation, including test protocols, validation reports, and traceability matrices, required for regulatory submissions and audits.
• Work closely with quality assurance and regulatory teams to ensure software testing aligns with industry best practices and regulatory requirements.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software testing, preferably in the medical device industry.
• Knowledge of software testing tools and frameworks (e.g., Selenium, JUnit, or similar).
• Strong analytical skills with excellent attention to detail.
• Effective communication and teamwork abilities.
• Experience with regulatory compliance and documentation for medical devices will be an advantage but not mandatory.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.