Responsibilities:

Support strategic equipment control and/or supplier data collaboration activities

• Support world-wide alignment and continuous improvement of practices.
• Evaluate global needs and cultivate global relationships.
• Support and mentor equipment control teams or data collaboration teams worldwide.
• Work with subject matter experts (SMEs) to identify business process gaps and Best Known Methods (BKMs) to address.
• Facilitate communication plan for all SWAT activities to/from stakeholders, participants, and management.
• Refine SWAT charter, and build roadmap going forward for world-wide alignment and continuous improvement of practices.
• Evaluate the quality of data collected, drawing conclusions based on this data and initiating follow-up action items.
• Partner with GQ teams, OCT PEE, OCT MAE, SMAI and IT to ensure all business needs are properly documented, validated, and escalated as needed.
• Determine if project objectives have been met or if more effort is required.
• Provide direction or facilitation of practical application of equipment control or supplier data collaboration systems within the MFG environment.

Demonstrate Individual Competence/Technical Expertise

• Provide technical consulting and hands-on assistance to Fab teams for creation and/or identification of best solutions.
• Evaluate third-party software and/or hardware selection.
• Recognize functional and business process gaps. Formulate proposals for closing them.
• Increase technical expertise by participating in classes conferences and researching existing literature and existing Micron expertise.

Program Management

• Demonstrate ability to move projects effectively through project lifecycle – initiate, plan, execute, and close – while balancing time, cost, quality, scope and risk/opportunity constraints.
• Motivate stakeholders and all project team members to take ownership of project and its success.
• Direct and coordinate the activities of others to accomplish project tasks successfully.
• Define metrics to gauge project success.

Communication

• Provide periodic updates based on project criticality to stakeholders and team members on project status, progress, and roadblocks/opportunities..
• Offer and communicate strategic ideas and thinking to meet corporate objectives. Listen to customer’s and stakeholder’s input/feedback and act to maximize benefit to Micron and meet corporate goals.
• Build and maintain external and internal relationships to broaden influence and increase learning opportunities in the PCS area.
• Provide communication to the World-wide equipment control and/or supplier data collaboration groups on lessons learned, project repositories, summits, new technologies, conference proceedings and Best Known Methods (BKMs).
• Demonstrate cultural sensitivity - Show respect for different cultures and languages.
• Communicate effectively with vendors/suppliers. Understand and use appropriate communication channels (other Central Team members, Purchasing, etc.). Clearly and accurately communicate Micron’s needs and objectives to vendors/suppliers. Adheres to company ethics and confidentiality policies regarding vendors/suppliers.

As a Manufacturing Central Team Quality SEAL Senior Engineer/Manager at Micron Technology, Inc., you will be a member of the worldwide Quality Team managing QDR, reducing variation and deviations for all Micron Fabs. Devising strategies to address specific problems. Specific to your role, your work will encompass the responsibilities of handing resources to enable the timely development of Quality Program for the network. Managing the respective Quality programs that will make FE Quality a success. As a solution provider, you will work with SMEs to identify their needs and to develop and implement reporting dashboard and data structure to meet their requirements for quality improvement. This will also extend to recommending improvements to meet the demands of swiftly changing interface technology. Setting up performing backups procedures for maintaining our data. Providing actionable insights in Frontend Global Quality Program through the analysis of facts and figures acquired from the network.

Additional Job Description:

• A solid and wide-reaching foundation in project and program management across different geological locations.
• Independent and self-motivated to see through the completion of projects
• In addition to possessing technical know-how, being communication savvy and be creative problem solvers
• Demonstrated high level problem solving skills, time management, organization and multitasking abilities
• Excellent verbal and written communication skills

• To see that the prescribed quality control measures are implemented and maintained throughout the life of the project.
• Monitor project progress and escalate if any significant impacts of out-of-scope aspects, and seek relevant guidance from the inline manager.
• To assure that each individual understands his/her own responsibilities of those whom he/she is working
• To utilize skills to run multiple projects as efficiently as possible.
• To liaise with all the material suppliers and sub-contractors and to ensure all supplies and works are completed on time.
• Plans all phases of the construction lifecycle from initiation to completion.
• Obtains all necessary regulations and permits.
• Orders necessary supplies, tools, and equipment.
• Collaborates with architects, engineers, electricians, and other specialists.
• Makes sure projects are aligned with agreed-upon plans.
• Manages site engineers and oversees their work.
• Excellent oral and written communication skills to effectively communicate across teams, customers, and specified project designers/developers
• Should have the ability to work on tight deadlines.
• Good leadership skills and the ability to present a professional image to inspire and guide the new team members.
• Writes and submits testing and inspection logs, quality assurance reports, and punch lists.
• Ensures that all local, state, and national building codes and regulations and safety precautions are followed.
• Act as the point of contact and communicate project status to all participants
• Create and maintain comprehensive project documentation, plans, and report
• Assign tasks to internal teams and assist with schedule management
• Help prepare budgets and analyse risks and opportunities
• Ensure standards and requirements are met through conducting quality assurance tests

Disposition of Fab lots affected by planned or unplanned deviations (including those from Special Work Requests and Fab Conversions, or from Quality Deviations and Excursions). Work closely with Fab partners to identify and contain excursion material. Initiate and lead multi-functional MRB (Material Review Board) to conduct risk assessment and decide upon disposition of excursion material. Review and analyze proposed process conversion changes to ensure that the proposed manufacturing changes conform to current business standards, improve Micron’s competitiveness in terms of wafer yields and costs, and protect Micron’s product quality.

• Knowledge of Electrical and Physical Failure analysis of semiconductors
• Knowledge of semiconductor memory product and reliability testing
• Strong understanding of NAND FLASH operation and structure
• Intermediate understanding of wafer fab manufacturing process steps, functional probe and parametric testing methodologies
• Excellent statistical data analysis, troubleshooting and decision making skills
• Proven track record to work effectively in both an independent role and in team environments
• Excellent multi-tasking and problem solving skills
• Intermediate PC skills including MS Office Word, Excel and PowerPoint
• Ability to clearly communicate data and findings both verbally and in writing

Additional Job Description

Develops, evaluates, revises, and applies technical quality assurance protocols/methods to inspect and test in-process raw materials, production equipment, and finished products. Ensures activities and items are in compliance with both company quality assurance standards and applicable government regulations. Performs analysis and identifies trends in the inspection of finished products, in-process materials and bulk raw materials, and recommends corrective actions when necessary. Ensures that established manufacturing inspection, sampling and statistical process control procedures are followed. May assure compliance to in-house and/or external specifications and standards, such as GMPs and ISO regulations. Evaluates and analyzes the efforts in organizing, documenting, and interpreting inspection support documents and records.

Job Descriptions:

• Lead day-to-day operations of the service team.
• Conduct product delivery training for distributors and customers.
• Provide remote diagnosis and fault analysis guidance via emails and/or calls.
• Perform on-site field services in local and ASEAN countries.
• Generate service reports and recommend spare parts, assisting the Parts team.
• Submit warranty claims and quality reports to drive product quality improvements.
• Demonstrate flexibility, including working beyond office hours if required.
• Undertake any other ad-hoc duties assigned from time to time.

Job Requirements:

• Diploma and/or certificates in Engineering with relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Meticulous and self-motivated; cooperate and comply.

Sitting within Data & Technology Architecture department, ICT Infrastructure Engineer is responsible:

• Implement projects within their emplaced practice to ensure service delivery and support to meet the intended availability, continuity, and capacity requirements.
• Translate business requirements into infrastructure design
• Work with service providers to design, develop, deploy, and configure infrastructure to meet resiliency, availability, and data integrity needs
• Ensure compliance to Authority Technical Architecture and SG-TRM, as well as IM8 and Authority IT Policies
• Manage Infrastructure projects and services to support application systems environments
• Request to provision new VMs for new systems
• Manage system architecture, resource planning, infrastructure performance, and system hosting environment from server hardware till OS layer (Excluding hypervisor and Storage) in support of new applications
• Main infrastructure single-point-of-contact for all new application system initiatives and to support/assist in application architecture design, integration and acceptance, and infrastructure performance testing
• Handover Infrastructure and Systems standard operating procedures and day-to-day performance/availability monitoring to the Operations Engineer upon commissioning and completion of PGP
• Support Operations Engineer on Infrastructure and Systems
• Assist in Infrastructure Architecture review, support, and endorsement Review Hardening standards for OS, database
• Hosting environment infrastructure on-boarding (design, setup, configuration, implementation, testing, and commissioning of infrastructure components)
• Understand systems operations environment is expected
• Familiar with API product and configuration for pub/sub and encryption highly preferred.

What we are looking for:

• Tertiary Education in relevant fields is preferred.
• Hands-on experience in relevant fields such as Windows, Linux RHEL and AIX OS,OS virtualisation technologies, SAN storage, and/or databases.
• Ability to take a broad, strategic perspective as well as drill deep to understand business needs and challenges.
• Ability to analyze and identify comprehensive solutions considering all functional implications while developing a workable solution.
• Results and customer-oriented
• Team player with organization and people-handling skills.
• ·Good communication skills, both oral and written, with the ability to pitch ideas and influence stakeholders.

Industry/ Organization Type: Manufacturing/ Production

Position Title: Lead Process Engineer (Injection Moulding)

Working Location: North - Yishun

Working Hours: 5 days (Mon – Fri, 8.30 am – 5.30 pm)

Salary Package: Up to SGD 8000 + Performance Bonus

Duration: Permanent

Key Responsibilities

• Establish process conditions through scientific moulding for existing/new products

• Troubleshoot moulding processes and material or equipment issues

• Evaluate tooling for areas of concern, areas of improvement for quality and efficiency, and recommend improvements to optimize moulding, set up, and overall manufacturing

• Collect and analyse data on individual processes to identify and improve process capability

• Document and maintain Mold process sheets for accuracy

• Support process technicians through training in scientific moulding practices

• Leadership role in continuous improvement and cost reduction activities

• Use Lean Manufacturing, Six Sigma, and other techniques to analyze process data to determine capabilities as well as improvements

• Manage projects, and ensure all tooling is executed smoothly and efficiently against an agreed plan

• Perform evaluation and development activities to provide solutions for technical problems to sustain and improve production yield, quality, process cycle time and cost reduction

• Lead team in problem-solving – identification of problems and analysis of the root cause

• Conduct proof of concept (POC) evaluation and design of experiments (DOE) during development, establish baseline process and metrics

• Lead design of experiments (DOE) to establish a stable and robust process that can be handed off to production personnel •

Requirement

• Diploma in Engineering or Sciences

• Min. 5 years’ experience in plastic injection moulding environment

• Experience in process capability studies and tooling technical incline is a plus

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

We provide full training:

• from 2D AutoCAD to 3D Sketch Up,
• from serving customers to site coordination,
• from material knowledge to quotation costing,
• we are looking for Gems who are customer service orientated, team player, self driven.
• candidates without experience/ relevant background may apply.

Responsibilities:

• Understand homeowner requirement and propose space planning with layout and material
• Draw in 2D AutoCAD & 3D Sketch Up
• Responsible to supervise work progress and meet the timeline
• Responsible to liaise with suppliers and subcontractors in order to have good quality works
• Work closely with in-house carpentry teams, sales marketing team, project manager and external designers.

Requirements:

• Diploma (Min), Bachelor Degree in Architecture, Construction Management, or related qualification
• Min 1 year's experience in interior design or construction project managment or related experience
• Must fluent in Mandarin (in order to handle queries and concerns from Chinese speaking counterparts in regards with the interior design related matters.)
• Creative, independent, self-discipline, willing to learn and meticulous
• Good social skills, love to talk to customer, good customer relationship management

• R&D engineer position available in design and physical implementation of high performance System-On-Chip ASICs.

1. Key competencies required are: Working experience leading team in physical design implementation of large ASICs (100 to 400 million gates complexity).
2. Demonstrated ability in providing technical support to customers and managing customer working relationship.
3. Demonstrated strong technical hands-on competency in using leading edge physical design EDA tools in projects.
4. In-depth CPU architecture/algorithm working knowledge and related physical design implementation knowledge highly advantageous.

• Utilize commercial and in-house EDA tools for the design and implementation of 100 ~ 400 million gate integrated circuits in 7nm/5nm/3nm process technologies.
• Opportunity to participate in innovation, design flow and methodology development to address challenges of designing into deep submicron processes and state-of-the-art ASIC design for computing and networking products

Qualifications :

• Degree, Masters or PhD in Electrical/Electronics/Computer engineering with 5 years or more experience in a relevant field.
• Familiarity with one or more VLSI design tools for Place&Route, Verilog Simulation, DRC/LVS Physical Verification, Static Timing Analysis and Power Integrity
• Experience in Perl & Tcl Scripting languages 3. Proficiency in UNIX/Linux is advantageous.

Broadcom Central Engineering is looking for a qualified individual who can provide best-in-class development and support for Analog/Mixed Signal tool flows focused on advanced FINFET process nodes. This individual will be hands-on, heavily involved in day-to-day design/layout issues and in addition, interact with EDA vendors, the PDK development and process technology teams to provide timely solutions, and develop, maintain, and support utilities to improve productivity. If hired, the candidate is expected to be physically located in Broadcom's Singapore facility.

Responsibilities:

The candidate's main responsibilities include the following:

• Support (50%), enhance, and maintain PDKs and various Analog/Mixed-Signal design tools
• Develop software for automation in Skill, Perl, Unix Shell scripting
• Create documentation and provide hands-on training for design and layout engineers
• Work with EDA vendors to track and resolve issues
• Work with Technology Foundry teams (external/internal) to facilitate debugging and proper characterization of all tool related issues.

Requirements:

• Master in Electrical Engineering or Computer Science + 5 years of EDA experience.
• Expertise in the following CAD Tools: Virtuoso Studio 23.1, Cadence ADE-L/XL, Maestro, Spectre, Virtuoso Layout, Quantus QRC, Voltus-Fi APS/EMIR, EMX, and Synopsys Hspice, Primesim, StarRC, Quickcap, and Mentor Calibre/PERC
• Solid background in programming skills, circuit design, and device physics knowledge to help solve circuit design, layout, physical verification, and post-layout extraction challenges and problems. Looking for domain expertise/specialists in RCX, EM/IR , Substrate-Noise/Crosstalk and Aging/SHE circuit-simulation.
• Experience in all phases of CAD tools from evaluation, QA, test, release, and user support to documentation
• Expert in Cadence Skill, Perl, Unix Shell and utilities
• Excellent interpersonal, communication, and presentation skills, along with strong multi-tasking skills, attention to detail, and the ability to work well in a team

Job Title

Quantity Surveyor

Occupation

QUANTITY SURVEYOR

Job Description & Requirements

Job Description

Duties & Responsibilities

• Good knowledge of contract and QS procedures and pricing.

• Experienced in procurement, budgeting, estimation, contract administration, measurement of quantities & variation orders

• Compile photos, inspection forms and all relevant documents required for VOs attachment.

• Strong interpersonal, communication & negotiation skills

• Prepare tender documents, contracts, budgets, bills of quantities and other documentation

• Any other ad-hoc tasks assigned by Superior.

Requirement

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil), Quantity Survey or equivalent.

• 05 years of relevant working experience (QS)

• Demonstrate proficiency and competency in a project QS function and can work independently.

Our office seeks an experienced PLC /SCADA Programmer. This position will be responsible for programming automation and controls systems involving PLCs (programmable logic controllers). Must have proven experience in PLC logic and programming with any of the following PLCs: Allen Bradley, Modicon, GE Fanuc, Siemens, AutomationDirect, Mitsubishi, Omron, Aromat, Toshiba, etc. Must be able to create and read logic and flow diagrams for program design, programming, simulation and testing, and start-up. Experience with logic auto-generation from templates is a plus.The ideal candidate will have a proven track record in programming leadership as well as the ability to develop and implement standard engineering practices, as well as provide detailed documentation upon project completion. This person will be the project technical lead and may be responsible for some project management activities. A BS in Electrical, Mechanical or Computer Engineering is desired. A minimum of 5 years experience in a similar position is required. Experience in Automotive, Food Processing, Bio-Tech, Pharmaceutical, Semiconductor, or Water/Wastewater industries is a plus.

1. JOB DESCRIPTION

Job Title

Safety Officer

Occupation

FIRE AND SAFETY OFFICER

Job Description & Requirements

Safety Officer

Job Description & Requirements

Job Description:

• All workplace safety and health matters
• Conduct Inspection and meeting
• Conduct accident/incident investigation
• Plan and organize safety promotion program
• Compile report/minutes/training materials/trend analysis
• Liaison with relevant authorities, client and all others
• Supervision of Workplace Safety and Environment workers
• Administrative and document tasks
• Update of relevant acts and regulations

Job Requirements:

• MOM registered Workplace Safety and Health Officer (WSHO)
• Minimum of 3 years working experience as WSHO in the Construction Industry
• First-Aider Certification an added advantage

Required Skills

· Build, deploy and manage Data security products to secure and implement governance policies on the data assets in the organization.

· Integrate security frameworks on modern high-performance analytics database and computation engines like Spark, Presto, Kafka, Elastic, and technologies in the stack

· Java - SpringBoot

· NoSQL Databases

· Distributed computing

· Data & API Integration

· Networking

· AWS/GCP/Azure

· Identity and Access Management (IAM)

· Docker/Kubernetes/OpenShift

1) Able to take off quantity/quotation for civil engineering work;

2) Submit progressive claim monthly;

3) Able to communicate with internal & external parties & agencies;

4) Local Experiences with be added advantage;

5) Able to read and interpret the construction drawings;

6) Computer knowledge of MS Office + AutoCAD;

7) Must have Civil Engineering Degree Certificate;

8) Order Materials based on approved construction plans;

9) Able to undertake any other instructions and works given by superiors.

Requirements:

• Proven experience as a Kubernetes Platform Engineer or similar role, with a strong background in containerization, orchestration, and cloud-native technologies.
• In-depth understanding of Kubernetes architecture, components, and operational best practices.
• Hands-on experience with containerization technologies like Kubernetes, especially AWS EKS, and Helm.
• Proficiency in scripting and automation using tools like Bash, Python, Go, or similar.
• Solid understanding of networking, security, and storage concepts in Kubernetes.
• Ability to troubleshoot and resolve complex technical issues related to Kubernetes and containerized applications.
• Experience with integrating Kubernetes with AWS cloud technologies, such as Secrets Manager, Load Balancers, etc.
• Strong communication and collaboration skills, with the ability to work effectively in cross-functional teams.
• Experience with CI/CD tools (Jenkins, GitLab CI/CD, ArgoCD) and version control systems (Git).
• Familiarity with other cloud platforms (GCP, Azure), runtime technologies (ECS, Lambda), and infrastructure-as-code (AWS CloudFormation) is advantageous.
• Certifications such as Certified Kubernetes Administrator (CKA) or Certified Kubernetes Application Developer (CKAD) are a plus.
• Experience with observability and monitoring tools (Prometheus, Grafana, ELK Stack) is a plus.
• Experience with automate testing tools such as ginkgo, testkube, is a plus.
• Experience with implementing and maintaining Kubernetes operator using Go is a plus.
• Experience with database technologies such as Postgresql, MySQL is a plus.
• Experience with data storage technologies such as Rook, Ceph is a plus.
• Experience with networking technologies such as Squid, Nginx, AWS TGW, istio service mesh, Kong, is a plus.

Facilities Mechanical Engineer

Yishun, Singapore

Who We Are:

Lumileds is the leading global light engine company serving customers in automotive lighting, general illumination, and consumer market segments. Lumileds operates in over 30 countries and has approximately 6,000 employees, Lumileds is shaping the future of light with the most innovative technology in the illumination and automotive sectors, and helping our customers deliver differentiated solutions to the world. Lumileds is headquartered in San Jose, California, with operations in Singapore, Malaysia, Poland, Germany and the Netherlands and sales offices throughout the world.

Together with its customers, Lumileds is making the world better, safer, more beautiful—with light.

The Lumileds environment is fast-paced, cutting-edge, intelligent and fun! We are looking for exceptional talent to join our team! To learn more, visit Lumileds.com

Position Summary:

This position will be responsible for planning, engineering, executing projects related to Facilities Mechanical & Water Related Systems to meet the current and future requirements, tracking system capacity to ensure efficient operation and providing technical support to Operations & Maintenance when required.

The person will be a decision maker and self-starter who meets the challenges of daily involvement to Facilities system operation and program.

What You Will Do:

· Provide Engineering analysis and System design to ensure it meet business needs, corporate insurer’s requirements and regulatory code compliance.

· Specify and review Mechanical Engineering standards, SOPs and maintain Facilities system documents.

· To participate in the review/forecast of budget and scenario.

· To assist in the collection and compilation of data for EDMA (authority) Energy & Water submission.

· Provide technical support to Operations & Maintenance team in resolving complex Mechanical system issues.

· Provide Engineering support to EHS for their environmental/sustainability program/reporting.

· Provide Engineering support to Projects & Tool Install including preparation of Capex request.

· Assist in equipment/component qualification and selection.

· To plan and work on system improvement projects.

· To participate in Energy/Water Conservation program.

· To review Facilities System (ACMV, CHW, DI, PCW, PV, Clean rooms, CO2 level…) to ensure that they are operating within specification.

· Share engineering knowledge and skills with other team members (Building Services, EHS, Engineering, Hook up, Operation, Project....

· Evaluate work performance of the contractor.

· To track and monitor system capacity and specification.

What You Will Bring (REQUIRED Qualifications):

· Degree in Mechanical or any other engineering discipline with work experience in Facilities Engineering, DI Plant operation, Water/Waste reduction projects in a Semiconductor manufacturing environment.

· Candidates with SCEM (Singapore Certified Energy Manager) or WEM (Water Efficiency Manager) certification will be advantageous but not necessary.

· Ability to lead cross functional projects in a fast-paced work environment.

· Good knowledge in relevant Code of Practice, able to read and understand P&ID and basic Project Management skill.

· Excellent Team player, adaptable, organized, highly motivated and analytical.

· Good in communication, interpersonal skills and able to work with minimum supervision.

· Good computer knowledge and skills in Microsoft Excel, Words, Power point etc

Education (Minimum Level)

· Bachelor's

Field of Study

Mechanical Engineering

Years of Experience (Minimum)

· 3 - 5 years

Licenses / Certifications

· Yes

Lumileds is an Equal Employment Opportunity Employer

Responsibilities

• Prepares Main Drawing List, Electrical Design Basis, Specification, and Data Sheet of Electrical Equipment
• Coordinates with multi-discipline on the interface issues with telecom, instrument, safety disciplines, etc
• Performs load calculation for the whole project and submits load list
• Conducts sizing calculation for transformers, generators, UPS and batteries etc
• Carries out cable sizing calculation to including volt drop calculation, circuit breakers sizing and others
• Executes lighting calculation as per specified lux requirement before proceeding lighting layout
• Performs load flow and short circuit calculation and relays coordination by software (EDSA, ETAP or SKM)
• Handles grounding system as per project requirement
• Supervises the designers on cable schedule, DB schedule etc
• Oversees material take off (MTO) for bulk material
• Meets clients, raises TQ, attends project meeting and attend FAT
• Reviews engineering deliverables from detailed engineering consultant / equipment vendors to ensure they are meeting Client’s specifications
• Reviews harmonics analysis, transient and stability studies, arc flash studies

Requirements

• Diploma in Electrical and/or Electronics Engineering or related engineering disciplines
• Ability to refer P&ID, logic diagrams for effective design
• Able to handle pressure and work under tight schedule
• Possess knowledge in contractual documentations
• Knowledge in 3D modelling for electrical equipment and installations

Our Address and Working Hours:

Seatrium Limited

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Requirements

· 5+ years of experience in software engineering or DevOps automation or data engineering

· Excellent understanding of software engineering principles and design patterns.

· Excellent programming skills in either Python or Java.

· Hands-on experience in containerization/ virtualization platforms, e.g. Docker/Kubernetes.

· Exposure to data science and machine learning technologies and methodologies.

· Good working knowledge of high performance computing, parallel data processing, and big data stack, e.g. Spark and Hadoop/Yarn.

· Experience to one or more commercial / open source data warehouses or data analytics systems, e.g. Teradata, is a big plus.

· Experience to one or more NoSQL databases is a big plus.

· Experience or Cloudera Data Science Workbench, is a big plus.