ECO cum WSH Coordinator

Job Description

i) To work with the PM to comply with environmental, health & safety (EHS) laws laws, advise PM on environmental remediation measures, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards

ii) Work with the PM to draw up, implement and monitor effective environmental management plans, including reviewing them when necessary:

· Prepare & submit to the PM the Site Environmental Control Programme before work commences at the worksite.

· Prepare & submit to the PM the Site Environmental Control Report once every two weeks.

iii) Inspect the construction site to ensure all facilities, equipment and operations do not pose any environmental health hazard;

iv) Inspect the on-site canteen, worker’s quarters, if any, and dining areas to ensure that good hygiene practices are being observed, and the areas are well maintained with good housekeeping.

v) Identify and discuss environmental health irregularities or potential lapses with the PM, and recommend corresponding measures to prevent or rectify such concerns;

vi) Attend to all feedback on any irregularities and inform the PM accordingly;

vii) Assist the authorities to investigate outbreaks of infectious, vector-borne or food-borne diseases at the construction site; and

viii) Organise campaigns, training courses and other activities, where required, to develop and sustain the interest of workers in maintaining good environmental health standards.

ix) Conduct inspection of the ECM at the worksite in accordance to ECM plan

x) Maintain records of all inspections.

xi) Advice the PM & project team members on the implementation of the EHSMS & implement the EHSMS.

xii) Assist the PM identify any unsafe work condition or unsafe work practice which is carried out in the worksite;

xiii) Recommend to the PM to implement such reasonably practicable measures to remedy the unsafe work condition or unsafe work practice;

xiv) Assist the PM implement such reasonably practicable measures referred to in (xiii) or safe work procedures.

xv) Advice the PM & the project team members on the implementation of the EHSMS.

xvi) Implement the EHSMS.

xvii) Stop the work or recommend to the PM / WSHO to stop the work if it is deem not safe for the work to continue.

xviii) Inform the higher level of management (e.g. Project Director) if conflict between EHS issues & operational considerations at the worksite cannot be effectively resolved.

xix) Report to PM

xx) Perform any duties assigned by PM.

Job Requirements

• Registered ECO by NEA
• Diploma in Public Health
• WSQ Advanced Certificate in Workplace Safety and Health
• Min 3 years of experience in the building & construction industry

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

• Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.
• Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.
• Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.
• Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.
• Handle all accident and incident reports.
• Work as a team with project team members and sub-contractors to provide a safe working environment.
• Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Certified NEA, ECO, ECO, ECMO
• At least 3-5 years' on-site experience

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

5. Commissioning (Cx) Engineer – Mechanical, Data Centre MEP

Role: Supports the lead mechanical commissioning engineer by conducting tests and inspections of mechanical systems critical to data center operations.

Key Responsibilities:

Assist in the commissioning and performance testing of mechanical systems, including chillers, cooling towers, air handling units, and CRAC units.

Perform functional tests of HVAC and cooling systems, ensuring compliance with design specifications and environmental requirements for continuous operation.

Document mechanical system test results and prepare reports for the Cx Lead Engineer.

Assist in troubleshooting mechanical issues, ensuring systems are optimized for redundancy and cooling performance.

Ensure that all mechanical systems meet the data center’s performance, efficiency, and reliability standards.

Skills Required: Knowledge of HVAC and cooling systems for data centers, mechanical testing and troubleshooting skills, ability to follow detailed commissioning procedures, and attention to detail in documentation.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Commissioning (Cx) Engineer – Electrical, Data Centre MEP

Role: Supports the lead electrical commissioning engineer in performing testing and validation of electrical systems critical for data center operations.

Key Responsibilities:

Execute electrical system testing, including functional tests of UPS systems, power distribution units (PDUs), switchgear, and emergency power systems.

Document test results and assist in producing comprehensive commissioning reports for electrical systems.

Support troubleshooting efforts during commissioning to resolve any performance issues in critical power systems.

Ensure that electrical components are installed and functioning according to design specifications and operational needs of a mission-critical data center.

Work closely with the lead electrical engineer to ensure all electrical systems meet performance, safety, and redundancy standards.

Skills Required: Knowledge of electrical systems in data centers, experience with testing high-voltage and backup systems, attention to detail, and technical documentation skills.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Supervise and train workers.

Guarantee all safety precautions and quality standards are met.

Resolve problems when they arise.

Proven experience as construction assistant foreman.

In-depth knowledge of construction procedures, equipment and OSH guidelines.

Ability to communicate and report effectively.

Problem-solving abilities.

OVERALL PURPOSE OF THE ROLE:

• Participate in the development of the T&C procedures and adequate method statements based on defined specifications from the system and sub system design to meet the contractual requirements.
• Prepare, manage and lead the on-site execution of the T&C activities until final handover to the authority.
• Coordinate and lead the execution of the Integrated T&C activities (external interfaces tests) with the participating E&M contractors. • Execute the on-site testing based on the approved subsystem procedures and Method Statements.
• Troubleshoot and provide preliminary investigations report on faults identified during the site testing.
• Perform testing and reporting activities consciously with quality,
• Maintain a close coordination with the different internal stakeholders such as Engineering, Installation, V&V and metiers experts to secure the delivery of the Signalling System under commissioning.
• Ensure the application of all EHS Golden rules (AZDP) during T&C activities.

S/he reports functionally to the ATS T&C Leader and hierarchically to the T&C Manager. Maintains a close relationship with the others members of the T&C and V&V teams.

QUALIFICATIONS & SKILLS:

EDUCATION
• Bachelor degree in Engineering or equivalent experience

TECHNICAL COMPETENCIES & EXPERIENCE

• Minimum of 2 years relevant experience in engineering, V&V, T&C or maintenance for railway signaling,
• Knowledge in deployment processes of Driverless Signaling systems (or with similar complexity),
• Good knowledge in Signaling environments and railway operations principles,
• Ability to define the testing principles leading to the preparation of the tests plans and/or procedures and reports, ability to define acceptance criteria,
• Experience in leading the troubleshooting of complex issues involving various internal and external systems. Relevant experience in commissioning of complex systems (ATS, SCADA or similar),
• Knowledgeable in OPC client-server architectures, XML, COM/DCOM, Database (MS-SQL), Windows HMI design, basic network configuration, and operating systems fundamentals,
• Knowledgeable in common programming and scripting languages,
• Experience in software testing and problem troubleshooting.

2. Commissioning (Cx) Lead Engineer – Electrical, Data Centre

Role: Leads the commissioning of all electrical systems within the data center, ensuring compliance with design standards and optimal performance for mission-critical operations.

Key Responsibilities:

Develop and implement detailed commissioning procedures for all electrical systems, including backup power systems.

Oversee testing and validation of high-voltage systems, low-voltage distribution, switchgear, UPS systems, generators, transformers, and battery systems.

Coordinate with the design, construction, and operational teams to ensure electrical systems meet redundancy, efficiency, and uptime requirements specific to data centers.

Prepare commissioning reports, test results, and electrical system performance documentation.

Troubleshoot complex electrical systems and propose solutions to ensure optimal system performance.

Ensure adherence to Tier standards (Uptime Institute) and other applicable codes for data centers.

Job Responsibilities:

• Technical support including full range of enterprise products, network technical solution, highlights proposal and etc.
• To handle clients’ inquiries and technical related issues.
• Collaborate with the team and others to identify, troubleshoot and find resolutions for technical problems.
• Responsible for new product test
• Promote solutions and deliver formal technical proposals / presentations to clients.
• Complete other tasks assigned by leaders and management.

Job Requirements:

• Experienced in networking product like Switch, Wireless Access Point, Router and other networking related product.
• Good knowledge in the fields of Business Network system such as Gateway, Switch, AP and IP CCTV.
• At least 2 years work experiences on Business Network domain or technical domain.
• Ability to speak in Chinese as the incumbent requires to liaise with the China HQ counterparts/personnel for work or project related matters
• Experienced in handling and troubleshoot technical issues.
• Possess CCNA/CCNP and other networking certificate would be an added advantage.

Commissioning (Cx) Lead Engineer – Mechanical, Data Centre

Role: Leads the commissioning of all mechanical systems within the data center, with a focus on achieving optimal cooling and environmental control essential for data center operations.

Key Responsibilities:

Develop and implement mechanical commissioning procedures .

Ensure systems are tested for cooling redundancy and efficiency, meeting stringent uptime and temperature control requirements.

Oversee performance testing of cooling systems, including airflow management and pressure tests to prevent hotspots and optimize cooling efficiency.

Collaborate with design and operations teams to ensure mechanical systems align with energy efficiency, environmental, and operational goals of data centers.

Troubleshoot and optimize complex mechanical systems to ensure high reliability and continuous operations.

Provide technical reports on system performance and recommendations for mechanical systems' long-term operation.

Familiarity with ASHRAE data center cooling guidelines.

Expect more. Connect more. Be more at Diebold Nixdorf.

Our teams automate, digitize, and transform the way more than 75 million people around the globe bank and shop in this hyper-connected, consumer-centric world. Join us in connecting people to commerce in this vital, rewarding role.

Attend field service ticket assigned by helpdesk, working on the ticket with status update, interrupt the ticket whenever necessary, close ticket when done with resolution. Follow up with interrupt tickets. Maintain a good manner for parts handling, for return & disposal.

Installs, debugs and provides technical maintenance for product and component hardware and software, mainly on customer premises. Provides scheduled inspection, cleaning and other services and performs minor product repairs within an assigned territory. Inspects products for correct operation and resolves noted issues and / or escalates according to established procedure. Schedules services, completes all required paperwork and works with customers to ensure satisfaction with service delivery and understanding of product functionality.

RESPONSIBILITIES

· Gains familiarity with Field Service Technician practices and procedures.

· With guidance and / or in conjunction with more experienced technicians performs any or all of the following: Incident Handling: Utilizes diagnostic tools to perform troubleshooting via detailed analysis of hardware and software failures.

· Performs hardware repairs on a component level.

· Cleans and adjusts mechanical components.

· Configures and installs applicable software.

· Preventive Maintenance: Performs routine checks according to documented procedures.

· Refills consumables as directed.

· IMAC/R: Installs, moves, adds, changes and removes hardware and software products.

· Customer Training: Instructs and trains customers on usage and operation of installed hardware and software.

· Participates in regular hardware and software trainings (on the job, classroom and web based).

· Participates in the implementation of measures to achieve agreed KPIs.

· Assists with special projects as assigned.

QUALIFICATIONS

• Minimum of 1-2 years of relevant experience or equivalent combination of education and experience in Field Services.
• Good written and verbal communication skills.
• Basic Mandarin language skill required due to operational needs.
• Exceptional customer service skills are needed.
• Ability to organize and inventory truck stock parts and tools.
• Sense of urgency, organizational skills, professional presence and work in team environment.
• Ability to pass MVR, background and drug test where required.

ABOUT US

Why should you join Diebold Nixdorf?

Brightest minds + technology and innovation + business transformation The people of Diebold Nixdorf are 23,000+ teammates of diverse talents and expertise in more than 130 countries, harnessing future technologies to deliver personalized, secure consumer experiences that connect people to commerce. Our culture is fueled by our values of collaboration, decisiveness, urgency, willingness to change, and accountability.

–Diebold Nixdorf is an equal opportunity employer and we value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, or disability status.

** To all recruitment agencies: Diebold Nixdorf does not accept agency resumes. Please do not forward resumes to our jobs alias, Diebold Nixdorf employees or any other organization location. Diebold Nixdorf is not responsible for any fees related to unsolicited resumes**

We are a global Company operating in multiple Locations and Entities. As we are keen to find the best solution for our candidates several legal entities might be applicable for a Job offer. A List of our operating entities can be found here - https://www.dieboldnixdorf.com/en-us/about-us/global-locations

QUALIFICATIONS
• Degree/Diploma in Civil Engineering/Quantity Surveying
• Applicants with substantial experience will be considered for the role of Senior Quantity Surveyor
• Proactive, good team player with the ability to meet tight deadlines

RESPONSIBILITIES
· Reporting to Tenders & Contracts Manager

· Perform quantity take off, identifying, and measuring the quantities of materials required.

· Prepare and review contract documents, ensuring that they are clear, accurate, and aligned with project requirements.

· Assist in the procurement process, including the preparation of tender documents and contract negotiations.

· Implement and maintain cost control procedures throughout the project lifecycle.

· Communicate effectively with clients, contractors, and other stakeholders.

QUALIFICATIONS:

· Degree/Diploma in Civil Engineering/Quantity Surveying

· Applicants with substantial experience will be considered for the role of Senior Quantity Surveyor

· Proactive, good team player with the ability to meet tight deadlines

RESPONSIBILITIES:

· Reporting to Tenders & Contracts Manager

· Perform quantity take off, identifying, and measuring the quantities of materials required.

· Prepare and review contract documents, ensuring that they are clear, accurate, and aligned with project requirements.

· Assist in the procurement process, including the preparation of tender documents and contract negotiations.

· Implement and maintain cost control procedures throughout the project lifecycle.

· Communicate effectively with clients, contractors, and other stakeholders.

We are looking for a Software Engineer who are inquisitive self starters that are able to thrive well in ambiguity who enjoys being at the forefront of a revolution in technology. You will be challenged with solving complex problems daily. If you are passionate about the future of decentralized finance, with strong desire to leave your mark on the Web 3.0 space, we want you!

Responsibilities:

• Design, architect and implement core features and peripheral contracts
• Design and write thorough unit and integration tests to test the developed smart contracts under various scenarios to ensure the dApp security
• Research and explore other protocols and programming models
• Maintain well-written documentation for internal and external users
• Improve development tooling and productivity in the smart contract team
• Participate in public protocol discussions on Discord or Twitter

Requirements:

• 1+ years of experience in writing smart contracts (in either Solidity, Rust, or equivalent) that have been deployed to a production mainnet.
• 4+ years of experience in software engineering. Able to develop backend and automation scripts in Typescript, Javascript, Shell and/or Python.
• Have good knowledge of data structures and optimisations
• Proficient in verbal and written communication in English
• Remote friendly but must be willing to work around GMT +8 Timezone Primarily

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

1. Plan, design and construction management of Mechanical services for all types of building projects.
2. Mechanical services include Air-conditioning & mechanical ventilation system, fire protection system, sanitary, plumbing, gas and swimming pool filtration systems.
3. Provide support in project management and contract administration for building engineering contracts.

Duty and responsibility

• Plan, organize and ensure the First Article, Incoming QC, In-Process QC; Final-QC activities are performed efficiently and effectively.
• Supervise and lead a team of QC Leaders/Specialist/Inspectors.
• Establish, review quality control plans, standard operating procedures to ensure products and processes conform with customer specifications
• Work with cross functional departments to ensure product quality and system requirements are realized.
• Liaise with suppliers to improve their processes and resolve material/component related quality issues including RTV lots.
• Perform internal audit to warrant processes and procedures are well maintain and comply with ISO 9001, 13485 Standards and Regulatory requirements
• Lead in the investigation of product non-conformity, gather, analyse data to determine root cause and implement corrective/preventive action to prevent recurrence.

Requirement

• 5 years’ experience in QA functions, preferably in the medical device/plastic moulding manufacturing.
• Good knowledgeable in statistical techniques, eg SPC, CPK, Gage R&R and FMEA.
• Well versed in measurement metrology eg, familiar with CMM, Smart-scope and the ability to interpret Engineering drawings and specifications.
• Computer literate with proficiency in Microsoft Office (Word, Excel, and Power Point).

Job Responsibilities:

• Render all M&E Engineering support to the M&E Manager/Project Manager for the successful execution of the project.
• Liaise and coordinate with clients, consultants, consultant representative (RE/RTO), relevant authorities and sub-contractors on M&E issues and challenges.
• Coordinate with all M&E subcontractors, as well as project team structural and architectural colleagues to resolve all drawings, site discrepancy or technical issues.
• Attend all project meetings and progress meetings relating to meeting master program schedule.
• Ensure good M&E drawing management and the control of M&E documentation/filing on site.
• Ensure timely production and submission of M&E shop drawings, materials submission and method statements. All M&E shop drawings, materials and method statement are to be approved before use.
• Ensure all M&E site activities are well-planned, well-coordinated and on time.
• Oversee and guide all M&E staff/Supervisors/sub-contractors, ensuring work is carried out in accordance to the approved shop drawings, materials and method statements.
• Prepare accurate and comprehensive M&E progress report with photographs when required.
• Arrange for all M&E T&C works
• Work with Consultants to come out with proper site inspection schedule to be carried out by the relevant government authorities.
• Work closely with EHS Department to ensure strict compliance of safety regulations.

Requirements:

• Degree in Mechanical/Electrical Engineering or related disciplines
• Minimum 3 years’ experience for Main Contractor in project management and/ or site coordination works for building or civil projects
• Strong in communication skill and speak good English
• A team player

Overview:

We are seeking a highly skilled and experienced DLP resident engineer with profound knowledge in leading DLP solutions such as Trellix, Forcepoint, Digital Guardian, Symantec, Skyhigh or Zscaler as well as database technologies like MSSQL. The successful candidate will be responsible for maintaining and fine-tuning an advanced DLP solution for a large organization, and will work closely with various stakeholders to ensure a successful implementation as well as manage an integrated reporting dashboard.

Primary Responsibilities:

• Collaborate with stakeholders to create, review, and finalize DLP policies and rules
• Develop and maintain technical design documentation, configuration documents, and build guides
• Assess customer environment and validate pre-requisites prior to implementation
• Configure DLP solutions to work with Internet Content Adaptation Protocol (ICAP) for monitoring web traffic.
• Proficient in configuring ICAP and proxy integration for Data Loss Prevention (DLP) setups
• Develop, configure, and test DLP policies and rules to ensure effectiveness and compliance
• Manage the DLP appliance upgrade process, ensuring seamless updates and minimal disruption to operations
• Lead User Acceptance Testing (UAT) and pilot testing phases to address any issues and validate success
• On-site support for issue troubleshooting
• Execution of change requests to remediate issues

Qualifications and Experience:

• To be able to demonstrate an expertise and deep understanding in your area of practice
• 3 years experience in DLP Solutions and cyber security or a similar role
• Implementation or management of cyber security solutions
• Experience with MSSQL administration and crafting/running SQL queries
• Experience with Network DLP technologies a plus
• Experience with windows tools, administration and IIS a plus
• To be able to demonstrate soft skills to interact and engage customers and various stakeholders
• Ability to work independently and with minimal supervision on projects
• Able to work in a team
• Strong problem solving, oral and written communication skills
• A strong desire to step out of your comfort zone and into an opportunity where you drive the work

Preferred Credentials (optional):

• Relevant certifications in leading DLP solutions (e.g., Trellix, Forcepoint, Digital Guardian, Symantec)
• Industry certifications in information security, such as CISSP, or CCSP
• Familiarity with change management procedures a plus

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects