Job description

• Experience in UVM verification methodology
• Experience in developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

Job Description

The job involves the supervision of MRT projects Cross Island Line

Job Requirements

RE shall have minimum 4 years of relevant experience as a civil engineer, of which minimum 2 years in supervision of deep excavation/basement works..

- Registered as RE Cert accredited by the Institute of Engineers Singapore (IES)/Association of Consulting Engineers Singapore (ACES).

- MRT experience will be an advantage.

This role is within Package and Development Engineering (PDE) group of Micron. This is a global department with teams located in USA, Singapore, Malaysia, Taiwan, and India. As a PDPE (Package Device Product Engineer) in PDE, you will be responsible to prepare for new DRAM, NAND or MNAND products and coordinate resources, testing, and analysis over the lifecycle of the product. You will run data analysis and modelling, create, and maintain root cause analysis documentation, analyze parametric, probe level (Front End) and electrical test (Back End) data and respond to failures. In this role, you will work with various Technology Development (TD) & New Product Introduction (NPI) Engineering (Electrical Failure Analysis (EFA), Physical Failure Analysis (PFA), Assembly) and Manufacturing groups to find the root causes of the failed units.

Responsibilities and Tasks

• Enable new test signals in BE which would capture assembly related failures.
• Work with Test Solution Engineering (TSE) & Product Engineering (PE) to ensure standardize test coverages & chars. Define Char limits, and approval of any test related changes.
• Development of new out-of-control-action-plan (OCAP) and its sustenance
• Provide Lot disposition based on parametric data observation in case of out-of-control (OOC) trigger.
• Ensure that Silicon & assembly process meets Product expectations by extracting and analyzing Probe and BE test data.
• Participate in Phase Gate review meetings, presenting the data analysis and deciding on Phase Gate exits related to electrical Test data.
• Analyze test failures, coordinating EFA & PFA to identify the root cause. Implement fixes for fails (Fab process or Design or Assembly Process)
• Finding out the correlation of test failures to assembly process and updating the database with the signatures observed
• Support Global and Local material review board (MRB) in case of excursions and RMA related to package intrinsic design. This includes analyzing electrical test data for root cause analysis (RCA) and assessing the health of the contained material.

Requirements

• Bachelors/ Masters in Electronics, Device Physics, Applied Physics, Electrical
• Sound knowledge of device physics
• Knowledge in Engineering Statistics
• Experience in data (electrical) analysis and modelling (JMP, Spotfire is a plus)
• Experience in programming (Python or Perl)
• Effective communication skills in written and spoken English
• Good multitasking and organizational skills, able to make decisions in complex situations
• Excellent problem solving and analytical skills
• Experience in NAND / DRAM memory or related field
• Knowledge in semiconductor packaging assembly processes
• Experience in fabrication processes, electrical characterization techniques, metrology techniques

You will be at the core team of Delta Research Center leading disruptive technological advancement with strong business value that empower company’s new business in intelligence machines, robotics and automation. As a research engineer, you will collaborate with technical experts to develop state-of-the-art mobile robot products / solution. You will play a key role in continuously improving existing and new products /technology, as well as be part of a dynamic and growing ecosystem in this field. You will manage and execute research programs and projects – particularly in the domain of robotic manipulation that develop and deliver impactful research and business outcomes.

Key Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Integration, testing and validation of R&D outputs into AMR platforms
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including own products
• Providing hands-on on-site support for software development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable software packages
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Troubleshooting of robotic system / subsystem / module using development tools, specialized equipment and standard lab equipment
• Adopting latest standards and/or methodology to work (standards, open source, common platform)

Job Requirements:

• Degree/Masters in Electronics, Computing, Mechatronics Engineering or equivalent
• Candidates with 3-4 years relevant experience in robotics research, integration, and development will be considered for a senior position
• Passionate in robotic navigation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in programming languages such as Python and C++, and/or other languages
• Proficient in robot programming using Robot Operating System (ROS) and Linux environment
• Proficient in software development in a collaborative environment using CI/CD tools
• Experience in one or more of the following domains will be preferred: Localisation, Mapping, Navigation, Machine Vision, Path Planning, Motion Planning, and/or Mission Planning
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player
• Strong in written and verbal communication in English

Key Responsibilities:

• Drive the overall Company’s Quality Assurance and Quality Control functions and programmes.
• Support the Project Management and QAQC teams in the development and implementation of Project Quality Plans (PQP)/CONQUAS/Quality Mark/Quality Management plans to achieve and maintain the highest level of Quality Standards.
• Ensure strict compliance with various Contractual QAQC Requirements conforming to Project requirements.
• Oversee the renewal audits & surveillance certification audits of existing ISO 9001 certifications to the latest versions.
• Act as main liaison party with external certifying body on all ISO certifications related to Quality.
• Oversee the continuous operations of the In house Academy with HR department to upskill and train all employees internally through in-house courses/training
• Conduct site-based Quality-related training to promote quality culture, better knowledge and awareness among project site staff.

Qualifications:

• Possess a recognized Engineering Degree with certification preferably BCA CONQUAS / QM manager certification and if having as Internal ISO 9001 Auditor certification is a plus point.
• At least 3 years' experience as a QA / QC role.
• Experienced in BCA CONQUAS / Quality Mark assessments is preferred
• Possess good communication skills and positive working attitude

a. Conduct feasibility study to develop basic and detailed engineering designs.

b. Manage budget and resources to ensure timely project completion.

c. Manage project to ensure compliance with legal and safety requirements.

d. Motivate team members and develop their skills.

e. Oversee workplace safety to ensure work is performed according to workplace safety procedures.

f. Minimum 2 years experience in Building Construction works.

Responsibilities:

· Pre and post technical support to customer on vision

· Provide technical support to customer

· Provide on-site service

· Evaluate and qualify knew products

Requirements:

· Degree or Diploma in Electrical / Optics Engineer

· 3 to 5 years of experience on machine vision application

· Good understanding on camera / lens / optical

Job Responsibilities:

• Advanced low-power physical design/integration flow development.
• Full-chip floor planning and place & route.
• Power network design and analysis.
• Support signoff timing closure, power integrity, and signal integrity.
• Physical Verification using DRC, LVS.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power physical design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

Company Overview:
Additive Inn is a dynamic and innovative 3D printing company based in Singapore. We specialize in prototyping, manufacturing, and design solutions. We seek a passionate and skilled 3D Printing Production Engineer/Technician to lead and grow our 3D printing production department.

Key Responsibilities:

• Department Development: Establish and manage a 3D printing production department, implementing efficient workflows and systems.
  Evaluate and procure 3D printers, materials, and accessories to enhance production capabilities.
  Collaborate with management to define production goals and KPIs.
  
• 3D Printer Maintenance & Operation: Operate and maintain various types of 3D printers, including FDM, SLA, SLS, and others as required.
  Troubleshoot and repair 3D printers to ensure minimal downtime.
  Perform regular calibration, cleaning, and upgrades on all equipment.
  
• Production Workflow: Prepare and optimize 3D models for printing using slicing software (e.g., Cura, PrusaSlicer, PreForm, etc.).
  Monitor printing processes to ensure accuracy, efficiency, and quality of output.
  Implement post-processing techniques (e.g., sanding, polishing, painting) where needed.
  
• Technical Expertise & Support: Provide technical support to clients and team members, addressing issues with designs, prints, or equipment.
  Identify and resolve challenges in production, including material compatibility and design feasibility.
  Maintain a log of issues, repairs, and solutions for continuous improvement.
  
• Documentation & Reporting: Document production processes, machine settings, and troubleshooting steps.
  Prepare reports on production performance and recommend improvements.
  

Requirements:

• Diploma or degree in Engineering, Manufacturing, or a related field.
• At least 1 year of hands-on experience with 3D printing technologies (FDM, SLA, etc.).
• Proficiency in slicing software such as Cura, PrusaSlicer, PreForm, or equivalent.
• Strong mechanical aptitude for troubleshooting and repairing 3D printers.
• Understanding of 3D modeling software (e.g., Blender, Fusion 360, SolidWorks) is a plus.
• Interest in continuous learning and staying updated with advancements in 3D printing.
• Ability to work independently and manage multiple priorities.

What We Offer:

• Opportunity to build and lead a dedicated 3D printing production department.
• Hands-on experience with cutting-edge 3D printing technologies.
• A collaborative and innovative work environment.
• Competitive salary and growth opportunities.

Join us at Additive Inn and be a pioneer in shaping the future of 3D printing production!

Roles & Responsibilities

• Create precise and well-structured Architectural Revit (BIM) models, ensuring accuracy and adherence to project requirements.
• Generate detailed plan, elevation, section, and detail drawings derived from BIM models, appropriately annotated for tender and construction purposes.
• Establish and uphold BIM standards and procedures, including sheet layouts, layering conventions, modeling processes, and drawing formats.
• Efficiently manage multiple projects simultaneously, ensuring productive collaboration and delivery within deadlines.
• Work both independently and as part of a team to achieve project goals.
• Possess strong expertise in Revit/BIM software, particularly in Architectural, Structural, and MEP disciplines.
• Maintain comprehensive knowledge of Singapore's construction regulations and industry standards.
• Oversee the coordination process, facilitating data exchange and collaboration between project stakeholders using BIM.
• Demonstrate expertise in drawing coordination and BIM management within the Singapore construction sector.
• Ensure As-Built/Record Models are meticulously maintained and updated.
• Support information exchange processes using established file-sharing protocols.

Requirements

• A Degree in Architecture, Engineering, Construction, or a Specialist Diploma in BIM, or equivalent qualifications.
• Minimum of 2 years of experience in BIM modeling, including work with C&S, Reinforcement, Architectural, and MEP-related projects.
• Experience with HDB BTO projects will be a strong advantage.
• Proficiency in interpreting architectural and structural construction documents.
• Ability to deliver models and shop drawings with a high degree of quality and within set timelines.
• Expertise in Autodesk Revit Architecture/Structure/MEP, Navisworks Clash Detection, 4D simulation, and Quantity Take-off.
• Experience in managing project Common Data Environments.
• Familiarity with Autodesk Construction Cloud (ACC Build) is a plus.
• Strong organizational and time management skills to handle complex project schedules efficiently.

Job Responsibilities:

• Schematic capture, optimization and simulation.
• Develop efficient circuit designs and digital STD cell library meeting performance, power and area target.
• Study and invent new digital STD cell circuit architecture.
• Work with a layout designer to implement the layout of circuit.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power analog design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

As a Senior Package Design Engineering (PDE) Central Engineering System and Analytics (CESA) Engineer, you will develop integrated solutions to empower Backend Operations to make data-driven and heuristics-based decisions. You will work across Global Operations and sites to improve Cost, Scale, Quality, and Cycle Time by defining and designing data architecture and collaborating with key partners.

Responsibilities

• Yield Enhancement (YE) lots analysisLead YE lot analysis including reconstructing fuse identififaction (FID) for traceability, statistic comparison for different group
  
• Yield modelling / pareto benchmarkingIdentify actionable opportunities from YE lots
  Develop and improve Yield Models for HBM
  Periodically improve models based on actual performance
  
• Best Known Methods (BKM) DeploymentDevelop BKM’s for YE and drive implementation
  Identify/align BKMs and monitor implementation
  Works with different teams in the identification of critical metrics

Requirements:

• PhD/Masters/Bachelors in Statistics, Mathematics, or a related field; advanced degree preferred.
• Minimum of 3 years of experience in semiconductor manufacturing or related fields
• Preferably with experienced in Package Design Engineering and Yield Enhancement
• Strong understanding and knowledge of semiconductor manufacturing processes and technologies.
• Proficiency in statistical/machine learning and statistical techniques skills will be additional advantageous;
• Experience in MRDA will be a plus
• Proven ability to make decisions, multi-task, and solve problems and address root causes.
• Exhibit critical thinking to see opportunities.
• Effective communication skills in verbal/written.
• Self-motivated. Able to work independently with minimal supervision.
• Able to travel as required to support department and company objectives.

1. Supervised the construction site.
2. Must work on site with supervised
3. Majority workers in my company is foreign employee, must be communicate with them.
4. Must be understand about construction related drawing.

Job Description:

· Able to install and repair electrical wiring, systems & fixtures in buildings.

· Assist the operations teams with electrical troubleshooting and repairs

· To perform corrective / preventative maintenance on equipment

· Having experience installing and repairing plumbing fixtures

· Ensure that the work area is safe and clean

Job Description

· Control and manage incoming and outgoing documents

· Responsible for full inventory of documentation & its easy retrieval

· Review and maintain the accuracy of records, updating where necessary to ensure they are up to date.

· Communication with relevant persons who need to submit documents

· Coordinate with project team to ensure compliance of all documentation

Skills / Qualifications

· Candidate must possess at least a Nitec in Business Studies / Engineering preferred

· At least 1 year of relevant experience in a construction company.

· Detail-oriented and organised

· Highly motivated, well organized, resourceful and proactive

· Possess good interpersonal skills with sound written and oral communication skills

Accounts Executive

Hexacon Construction is seeking an accounts executive immediately.

What’s on offer

This is a permanent role based at Balestier Road.

· SGD 2,600 - $3,700 monthly, depending on experience and qualifications

· 5-day work week

· 14 days annual leave

· 3 months probation

Reporting to the Finance Controller and Senior Accountant, you are responsible for:

· Maintain accounting general ledgers within accounting software and on Excel

· Perform general ledger, bank, supplier statement reconciliation

· Assist in preparing monthly management accounts, quarterly GST Form 5

· Assist with auditor and tax agent queries, providing of relevant information

· Accurate data entry into claims submission, supplier and payment processing

· Other ad-hoc duties

The successful candidate should:

· Degree / diploma in accountancy

· Ideally, 1-3 years of accounting experience. However, fresh degree / diploma graduates are still welcome to apply

· Meticulous, with an eye for detail

· Spoken and written English proficiency

· Candidates with prior experience with IFCA accounting software will have a significant advantage, but not a must

· Live within the Balestier / Toa Payoh / Bishan area

Job description

· Review the safety management system and offer suggestions for enhancement.

· Implement and oversee the ECM Plan as per requirement.

· Collaborate closely to monitor earth control activities at different stages of the project.

· Manage on-site safety audits.

· Investigate incidents/accidents and propose corrective actions to prevent recurrence.

· Ensure staffs adhere to statutory acts, regulations, company safety protocols, and industry codes.

· Demonstrate effective communication abilities to interact with colleagues, clients, and governmental bodies.

· Perform any other ad-hoc duties as assigned.

Requirements

· Diploma in Workplace Safety & Health or equivalent

· Registered WSHO with ECO and ECMO

1. Primary Responsibilities

• Project Maintenance Management: Oversee maintenance teams’ tasks across multiple project sites, ensuring timely, cost-effective, and quality service.
• Scheduling & Planning: Develop, schedule, and rectification procedure and ensure timely repairs.
• Budgeting & Cost Control: Manage maintenance team expenditures and track expenses, and identify cost-saving measures.
• Quality Assurance: Ensure maintenance team meets industry standards, client requirements, and conmpany’s quality guidelines.
• Risk & Compliance: Ensure adherence to safety protocols, compliance with regulatory and company standards, and mitigate risk on project sites.
• Client Liaison: Act as the primary contact for clients and consultants concerning maintenance and defect rectification.
• Vendor & Supplier Coordination: Manage relationships with suppliers, negotiate service contracts, and ensure materials meet project specifications.

2. Leadership and Team Management

• Team Supervision: Lead and manage maintenance staff, including training, scheduling, and performance evaluations.
• Training & Development: Ensure that maintenance personnel are trained in safety procedures, equipment handling, and troubleshooting.
• Performance Monitoring: Regularly assess team performance, address any gaps, and promote staff development and skill enhancement.

3. Technical Skills and Knowledge

• Technical Knowledge: Deep understanding of construction technology and method used in the industry and expertise in their maintenance and preventive requirements.
• Problem Solving: Diagnose and resolve maintenance issues efficiently to minimize inconvenience to client.
• Safety Standards: Strong knowledge of workplace safety and health regulations, particularly in construction site.
• Software Proficiency: Familiarity with relevant software for planning and record-keeping.

4. Reporting & Documentation

• Maintain accurate records of maintenance activities, including work orders, inspection reports, and incident logs.
• Provide regular updates and detailed reports to management and clients on equipment performance, maintenance costs, and any challenges.

5. Qualifications

• Education: Degree in engineering, facilities management, or related field.
• Experience: At least 7-10 years of experience in a maintenance role, with prior leadership experience preferred.
• Skills: Strong communication, negotiation, and project management skills.

6. Key Competencies

• Analytical Thinking: Ability to assess needs and identify areas for improvement.
• Attention to Detail: Precision in inspection, rectification procedures, and adherence to protocols.
• Time Management: Efficiently prioritize tasks and manage resources to meet deadlines.
• Adaptability: Ability to handle unexpected challenges and adjust maintenance plans as needed.

• Reports directly to QA manager
• Develope Quality Manual
• Conduct in-house quality training
• Lead and guide site staff and contractors to achieve qulaity workmanship
• Conduct preiodic site survelliance with QA Supervisors
• Prepare inspection test plans
• Collate and report non conformanaces
• Attend site consultant/ coordination meetings
• Produce progress reports
• Mininum 4 years experience in related field
• Understands the requirement and criteria of CONQUAS 21; preferbaly with exposure to Quality Marks inspection procedure and preparation
• Conduct defect investigation and identification
• Proficient in Microsoft Office; Excel/ Words/ Powerpoint
• Good command of English
• Selt motivated
• indepentent

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

• Project lead experience in actual projects
• Facilitating BIM Coordination meeting
• Planning BIM processes
• BIM Legal and Contractual issues
• Organisation's adoption plan

Job requirement

• BIM quality check
• BIM authoring tool
• BIM design review
• BIM analysis tool
• BIM Coordination tool
• Project workspace
• BCAA specialist diploma

Job description

· Responsible for the planning, management, and coordination of the MEP Subcontractors testing & Commissioning activities.

· Ensure that the required tests and inspections are performed in accordance with the approved plan.

· Follow-up with subcontractors to resolve any deficiencies that are found.

Job requirement

· Minimum of 10 years engineering experiences in construction industry with relevant diploma.

· Minimum of 5 years construction experience for similar size complexity projects & complexity projects.

1. Assist to identify and correct unsafe conditions and work practices;
2. Provide recommendations for improving safety in the workplace;
3. Ensure that all works are performed according to the approved method statement, risk assessment, and SWP;
4. Maintain all equipment and machinery on site and ensure all required certificates are in place;
5. Conduct and keep record of daily WSHE inspection;
6. Carry out daily joint WSHE inspection together with sub-contractor’s WSH Coordinator/ Supervisor and timely rectify any unsafe acts or conditions;
7. Maintain documentation of the company's safety procedures, accidents and related events;

Job Description:

• Manage the recruitment process for construction staff (e.g., engineers, coordinators, managers) and site workers.
• Utilize job portals, recruitment agencies, and social media platforms to identify potential candidates.
• Conduct initial resume screenings and shortlist candidates for interviews with hiring managers.
• Schedule interviews with candidates and assist in the interview process.
• Support in making job offers and negotiating terms with selected candidates.
• Maintain and update recruitment records, including interview outcomes and new joiner documentation.
• Oversee the onboarding process for new joiners, including briefing them on administrative details and benefits.
• Organizing recruitment campaigns, job fairs and other events to attract candidates.
• Handle processes related to work pass applications and statutory requirements for housing, medical etc.

Requirements:

• Diploma/Degree in Human Resources, Business Administration, or a related field.
• 1-2 years of experience in recruitment, preferably within the construction industry.
• Strong understanding of recruitment processes for both construction staff and workers.
• Knowledge of local employment laws, work permits, and foreign worker regulations.
• Excellent organizational, communication, and interpersonal skills.
• Proficiency in Microsoft Office.

• To develop and submit a Project Interface Plan (PIP) which manages the interface management process throughout the project life cycle.
• To be responsible for the project wide internal and external interface management activities.
• To conduct weekly interface meeting with all stakeholders and interface manager of all contractors (including SC, direct contractors / specialists to be appointed)
• To manage and coordinate with interface manager of all systems to incorporate the finalised interface details into the overall combined services plans /BIM
• To work with BIM coordinator and be responsible for the BIM coordination for development of BIM Model.

Job Requirement

Shall possess an Engineering Degree with at least 10 years of relevant working experience in M&E services coordination OR

A diploma with at least 20 years of relevant working experience in M&E services coordination.