RESPONSIBILITIES:-

• Ensure compliance and practice of Company's QEHS Management System for the project
• Advice to the PM reasonably practicable measures to eliminate any foreseeable risk to any person who is at work in that workplace or may be affected by the occupier’s undertaking in the workplace.
• Conduct safety team in the implementation and monitoring of environmental, health and safety plans/ measures
• Review all risk assessments and risk management internally and externally
• Manage incidents' investigations, recommend corrective actions and follow-up on the implementations and effectiveness of actions taken
• Liaise and communicate well with site operations staffs, project managers, contractors and third parties on all safety and health issues
• Ensure that all statutory regulations, code of practice and company’s EHS rules & regulations are implemented and complied with at the project site.
• Conduct regular inspection and audits on the EHS provisions on site
• Establish and maintain a positive EHS environment on the project site.

REQUIREMENTS:-

• Diploma in Environmental, Health & Safety related qualifications
• Registered MOM Workplace Safety and Health Officer
• 4 years WSH experience in HDB projects required

Job Responsibilities:

• Actively involve and contribute in technical discussions, site planning and site meetings.
• Maintain good working relationship with all parties.
• Maintain good communication with all other department.
• Conduct/facilitate meeting with subcontractors, architects, consultants and authorities.
• Conduct joint site inspections with site team and subcontractors to improve work efficiency, quality and WSHE compliances and attest any weak work practices.
• Monitor the project’s progress and deliver project to expected safety and quality standards.
• Monitor and control project’s cost by taking proactive measures to prevent costs overruns.
• Develop and maintain Standard Work Procedures for all critical and major work activities.
• Monitor and plan ahead in relation to the procurement of the company’s assets/equipment/resources.
• Mentor project team by providing proper guidance and training.
• Other duties which may be assigned by the management

Job Requirements:

• Degree in Civil Engineering or equivalent. Diploma holders with relevant experience will also be considered.
• Strong familiarity with authority submissions and regulatory requirements.
• Minimum 5 years of relevant working experience.
• Proven relevant track record in HDB projects.
• Independent, diligent, meticulous and highly motivated with excellent team spirit.
• Proficient in Microsoft Office and knowledge of BIM.
• Excellent leadership, analytical and communication skills.

Job Description:

• Assisting Contract Manager in pricing and taking off measurement works.
• Preparing Tender and contract documents.
• Monitoring related projects.
• Liaising with clients, consultants and contractors.
• Site viewing and understanding.
• All other necessary admin works related to work scope.
• Requirements:
• Min. Diploma of relevant discipline or equivalent
• Min. 5 yrs experience in civil engineering industry
• Knowledge of Contracts Law and SOP
• Experience in contract drafting
• Experience in contract administration

Job Description:

• Report to Head of Planning / Planning Manager / Technical Manager
• Involved in all trades coordination during design development and planning stage (Architectural , Structural & MEP)
• Basic knowledge of authority requirement / regulation to execute planning works
• Ability to adapt to digitalised process in construction industry

Job Requirement:

• Bachelor's Degree in Civil & Structural Engineering or Science (Construction)
• Basic knowledge of Power BI , MS Teams is an added advantage
• Ability to communicate effectively with China Labour Subcontractors
• Able to starts work within short notice period

1. Good Skill with printing work.
2. Supervised the working site.
3. Good communication skill with our foreign workers ( Bangladeshi ).

1.Experience on Floor Tile works.

2. Supervised the working site.

3.Good Communication skill with our foreign workers ( Bangladeshi )

Job Responsibilities:

· Over-all project management, which includes planning and implementation of assigned projects.

· Site feasibility & Solar Systems Design and complete execution.

· Complete system designs for PV projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of BOS location and interconnection details, and labelling.

· Planning and monitoring of progress and timely completion of projects which includes preparation of detailed progress and status reports.

· Coordination with clients & consultants to ensure smooth communication.

· Provide support to technical design, review and approve engineering drawing submissions.

· Ensuring smooth procurement process and timely deliveries, which includes preparation of status reports.

· Provide technical support during installation, testing and commissioning.

· Attending site meetings for smooth coordination

Requirements:

· Minimum Degree in Electrical/Electronic/Microelectronic/Mechatronic/Green Building & Sustainable or related engineering degree.

· Minimum 2 year of experience in engineering field

· Computer knowledge in Auto CAD.

· Ability to plan & monitor project progress to ensure timely completion

· Ability to communicate with clients & consultants · Willingness to learn & improve personal skills through team work

· Knowledge in basic project management e.g. preparing monthly project reports, site planning, monitoring & control processes and project risk analyses.

· Good work ethics and team player

· Knowledge in Solar system design and electrical engineering fields

· Knowledge in PV Solar and software of PVsyst

Managing and monitoring daily operations and activities on site.

· coordinating contractors and vendors

· Ensuring all on-site workers adhere to the health and safety regulations

· Implementing industry best practices and safety protocols

· Regularly checking inventory and placing orders for building materials

· Ensuring all equipment are in working order and good condition

· Leadership and management skills to better handle the tasks on site

· Organisation skill and Time management skill

· To communicate with all stakeholders & team members, to relay messages & instructions effectively

· Independent thinker & confident enough to make & execute decisions to solve daily issues

As a PDE Central Process Integration Principal Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide synergy

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

JOB QUALIFICATIONS

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

As a PDE Central Process Integration (PI) Senior Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide alignment

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

Requirements

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

Keen on the role? Apply now!

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

ECO cum WSH Coordinator

Job Description

i) To work with the PM to comply with environmental, health & safety (EHS) laws laws, advise PM on environmental remediation measures, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards

ii) Work with the PM to draw up, implement and monitor effective environmental management plans, including reviewing them when necessary:

· Prepare & submit to the PM the Site Environmental Control Programme before work commences at the worksite.

· Prepare & submit to the PM the Site Environmental Control Report once every two weeks.

iii) Inspect the construction site to ensure all facilities, equipment and operations do not pose any environmental health hazard;

iv) Inspect the on-site canteen, worker’s quarters, if any, and dining areas to ensure that good hygiene practices are being observed, and the areas are well maintained with good housekeeping.

v) Identify and discuss environmental health irregularities or potential lapses with the PM, and recommend corresponding measures to prevent or rectify such concerns;

vi) Attend to all feedback on any irregularities and inform the PM accordingly;

vii) Assist the authorities to investigate outbreaks of infectious, vector-borne or food-borne diseases at the construction site; and

viii) Organise campaigns, training courses and other activities, where required, to develop and sustain the interest of workers in maintaining good environmental health standards.

ix) Conduct inspection of the ECM at the worksite in accordance to ECM plan

x) Maintain records of all inspections.

xi) Advice the PM & project team members on the implementation of the EHSMS & implement the EHSMS.

xii) Assist the PM identify any unsafe work condition or unsafe work practice which is carried out in the worksite;

xiii) Recommend to the PM to implement such reasonably practicable measures to remedy the unsafe work condition or unsafe work practice;

xiv) Assist the PM implement such reasonably practicable measures referred to in (xiii) or safe work procedures.

xv) Advice the PM & the project team members on the implementation of the EHSMS.

xvi) Implement the EHSMS.

xvii) Stop the work or recommend to the PM / WSHO to stop the work if it is deem not safe for the work to continue.

xviii) Inform the higher level of management (e.g. Project Director) if conflict between EHS issues & operational considerations at the worksite cannot be effectively resolved.

xix) Report to PM

xx) Perform any duties assigned by PM.

Job Requirements

• Registered ECO by NEA
• Diploma in Public Health
• WSQ Advanced Certificate in Workplace Safety and Health
• Min 3 years of experience in the building & construction industry

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

• Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.
• Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.
• Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.
• Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.
• Handle all accident and incident reports.
• Work as a team with project team members and sub-contractors to provide a safe working environment.
• Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Certified NEA, ECO, ECO, ECMO
• At least 3-5 years' on-site experience

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

5. Commissioning (Cx) Engineer – Mechanical, Data Centre MEP

Role: Supports the lead mechanical commissioning engineer by conducting tests and inspections of mechanical systems critical to data center operations.

Key Responsibilities:

Assist in the commissioning and performance testing of mechanical systems, including chillers, cooling towers, air handling units, and CRAC units.

Perform functional tests of HVAC and cooling systems, ensuring compliance with design specifications and environmental requirements for continuous operation.

Document mechanical system test results and prepare reports for the Cx Lead Engineer.

Assist in troubleshooting mechanical issues, ensuring systems are optimized for redundancy and cooling performance.

Ensure that all mechanical systems meet the data center’s performance, efficiency, and reliability standards.

Skills Required: Knowledge of HVAC and cooling systems for data centers, mechanical testing and troubleshooting skills, ability to follow detailed commissioning procedures, and attention to detail in documentation.

Commissioning (Cx) Engineer – Electrical, Data Centre MEP

Role: Supports the lead electrical commissioning engineer in performing testing and validation of electrical systems critical for data center operations.

Key Responsibilities:

Execute electrical system testing, including functional tests of UPS systems, power distribution units (PDUs), switchgear, and emergency power systems.

Document test results and assist in producing comprehensive commissioning reports for electrical systems.

Support troubleshooting efforts during commissioning to resolve any performance issues in critical power systems.

Ensure that electrical components are installed and functioning according to design specifications and operational needs of a mission-critical data center.

Work closely with the lead electrical engineer to ensure all electrical systems meet performance, safety, and redundancy standards.

Skills Required: Knowledge of electrical systems in data centers, experience with testing high-voltage and backup systems, attention to detail, and technical documentation skills.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Supervise and train workers.

Guarantee all safety precautions and quality standards are met.

Resolve problems when they arise.

Proven experience as construction assistant foreman.

In-depth knowledge of construction procedures, equipment and OSH guidelines.

Ability to communicate and report effectively.

Problem-solving abilities.

Job Responsibilities:

• Technical support including full range of enterprise products, network technical solution, highlights proposal and etc.
• To handle clients’ inquiries and technical related issues.
• Collaborate with the team and others to identify, troubleshoot and find resolutions for technical problems.
• Responsible for new product test
• Promote solutions and deliver formal technical proposals / presentations to clients.
• Complete other tasks assigned by leaders and management.

Job Requirements:

• Experienced in networking product like Switch, Wireless Access Point, Router and other networking related product.
• Good knowledge in the fields of Business Network system such as Gateway, Switch, AP and IP CCTV.
• At least 2 years work experiences on Business Network domain or technical domain.
• Ability to speak in Chinese as the incumbent requires to liaise with the China HQ counterparts/personnel for work or project related matters
• Experienced in handling and troubleshoot technical issues.
• Possess CCNA/CCNP and other networking certificate would be an added advantage.

OVERALL PURPOSE OF THE ROLE:

• Participate in the development of the T&C procedures and adequate method statements based on defined specifications from the system and sub system design to meet the contractual requirements.
• Prepare, manage and lead the on-site execution of the T&C activities until final handover to the authority.
• Coordinate and lead the execution of the Integrated T&C activities (external interfaces tests) with the participating E&M contractors. • Execute the on-site testing based on the approved subsystem procedures and Method Statements.
• Troubleshoot and provide preliminary investigations report on faults identified during the site testing.
• Perform testing and reporting activities consciously with quality,
• Maintain a close coordination with the different internal stakeholders such as Engineering, Installation, V&V and metiers experts to secure the delivery of the Signalling System under commissioning.
• Ensure the application of all EHS Golden rules (AZDP) during T&C activities.

S/he reports functionally to the ATS T&C Leader and hierarchically to the T&C Manager. Maintains a close relationship with the others members of the T&C and V&V teams.

QUALIFICATIONS & SKILLS:

EDUCATION
• Bachelor degree in Engineering or equivalent experience

TECHNICAL COMPETENCIES & EXPERIENCE

• Minimum of 2 years relevant experience in engineering, V&V, T&C or maintenance for railway signaling,
• Knowledge in deployment processes of Driverless Signaling systems (or with similar complexity),
• Good knowledge in Signaling environments and railway operations principles,
• Ability to define the testing principles leading to the preparation of the tests plans and/or procedures and reports, ability to define acceptance criteria,
• Experience in leading the troubleshooting of complex issues involving various internal and external systems. Relevant experience in commissioning of complex systems (ATS, SCADA or similar),
• Knowledgeable in OPC client-server architectures, XML, COM/DCOM, Database (MS-SQL), Windows HMI design, basic network configuration, and operating systems fundamentals,
• Knowledgeable in common programming and scripting languages,
• Experience in software testing and problem troubleshooting.

2. Commissioning (Cx) Lead Engineer – Electrical, Data Centre

Role: Leads the commissioning of all electrical systems within the data center, ensuring compliance with design standards and optimal performance for mission-critical operations.

Key Responsibilities:

Develop and implement detailed commissioning procedures for all electrical systems, including backup power systems.

Oversee testing and validation of high-voltage systems, low-voltage distribution, switchgear, UPS systems, generators, transformers, and battery systems.

Coordinate with the design, construction, and operational teams to ensure electrical systems meet redundancy, efficiency, and uptime requirements specific to data centers.

Prepare commissioning reports, test results, and electrical system performance documentation.

Troubleshoot complex electrical systems and propose solutions to ensure optimal system performance.

Ensure adherence to Tier standards (Uptime Institute) and other applicable codes for data centers.

Commissioning (Cx) Lead Engineer – Mechanical, Data Centre

Role: Leads the commissioning of all mechanical systems within the data center, with a focus on achieving optimal cooling and environmental control essential for data center operations.

Key Responsibilities:

Develop and implement mechanical commissioning procedures .

Ensure systems are tested for cooling redundancy and efficiency, meeting stringent uptime and temperature control requirements.

Oversee performance testing of cooling systems, including airflow management and pressure tests to prevent hotspots and optimize cooling efficiency.

Collaborate with design and operations teams to ensure mechanical systems align with energy efficiency, environmental, and operational goals of data centers.

Troubleshoot and optimize complex mechanical systems to ensure high reliability and continuous operations.

Provide technical reports on system performance and recommendations for mechanical systems' long-term operation.

Familiarity with ASHRAE data center cooling guidelines.