Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Responsibilities:

• Well-versed in Construction Method Statements
• Manage Piling, Excavation, ERSS, RC, and Architecture work
• Preparing the site and liaising with other construction professionals before construction work starts
• Developing the program of work and strategy for making the project happen
• Planning ahead to prevent problems on site before they occur, planning the delivery and storage of equipment and materials
• Making safety inspections of the site when work is underway and ensuring regulations relating to health, safety, and the environment are adhered to
• Ensure progress of work is within budget & timelines as well as quality & safety objectives
• Control and monitor work progress and resources
• Lead a team of technical staff in daily operations

Requirements:

• Recognized Degree in Civil Engineering
• Min 10 years of civil engineering experience of which includes 5 - 7 years in managing a construction team for LTA MRT projects
• Well-versed in construction sequence, principles and LTA regulatory requirements
• Good leadership skills
• Good communication and interpersonal skills
• Great team player

To view more roles within the Construction & Engineering | Project Management Sector please visit our LinkedIn page @ Artemis Executive Solutions. We thank you for taking the time to apply but due to the high volume of applicants, we regret to inform you that only shortlisted applicants will be contacted.

EA Lic. No. 22S1050 | R1330228

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

JOBSCOPE OVERVIEW

1. Represent QA/QC department in 2G Management Meetings or other meetings required by Directors.

2. Create and maintain standard operating procedure (SOP’s), protocols, guidelines that ensure consistency and efficiency throughout the QA cycle.

3. Acts as Committee of all ISO audits.

4. Supervise and manage QA/QC team and interns.

5. Conduct physico-chemical and microbiological test for Chemicals and Incoming Paper.

6. Liaise with suppliers and third-party agencies.

7. Provide technical support to the sales and marketing team regarding product specifications, sample requirement & others.

8. Document those methods in standard operating procedures (SOPs) and production records, quality assurance activities with internal reporting and audits.

9. Review and compile documents for Audits (Batch Record: Prod sheet, Quality control test Reports; FG and RM Reports, Mixing records).

10. Ensure that on time calibration program of equipment (mechanical and lab instruments, weighing scales and test weights) are executed.

11. Assist to do in compounding and mixing when Mixer Operator is on leave.

12. Liaise with Overseas factory (China and Indonesia) to ensure that product or service meets specified requirements.

13. Review method validation study reports, ensure proper documentation of findings, and assist in approval or re-validation recommendations. Prepare summary reports of validation activities, results, and recommendations for management review.

14. Investigate validation failures or deviations, identify CAPA, and ensure implementation. Collaborate with cross-functional teams to enhance the efficiency and effectiveness of validation activities.

15. Identify risks in testing methods, implement mitigation strategies, and ensure data integrity during validation to maintain accuracy, reproducibility, and regulatory compliance.

16. Review and approve method validation documentation, ensuring accuracy, completeness, and compliance with quality standards. Maintain up-to-date records of validation activities, deviations, CAPA, and ensure proper version control for all related documents.

17. Provide training on method validation processes and best practices, and support Production, QC and R&D teams in executing protocols and analyzing data accurately.

18. Any other area of responsibilities that the company deems necessary.

A. QUALITY CONTROL

1. Manage product complaints or non-conformances; thoroughly investigate process failure, determine the root cause, and take prompt corrective actions.

2. Conduct physical, physico-chemical test and microbial analysis of finished product.

3. Track the materials (chemicals and fragrance) that are present in the chemical room and know whether additional supplies need to be ordered.

4. Calibrate all equipment for In-house verification Example – pH meter, weighing scale etc. and arrange external calibration with external party.

5. Train new production operators in quality control.

6. Any other area of responsibilities that the company deems necessary.

B. LIAISE WITH SUPPLIERS (Services):

1. DI Water System Maintenance (Requirements: According to Contract): Loop Sterilization, UV-Lamp etc.

2. Complete Water Quality Testing (annual) by External Lab

3. Monitor the consumable supplies from different suppliers for DI Water (Column, filters, gauges).

4. Wet Wipes Monthly External Microbial testing

5. Monitor the annual cleanroom Certification.

6. External Calibration of Equipment

7. Any other area of responsibilities that the company deems necessary.

C. PRODUCT TECHNICAL SUPPORT

1. Support Export Sales and Marketing for preparation of documentation for regulatory use (COA, Ingredient’s list, FG and RM spec etc).

2. Collaborate with development, QC, and regulatory teams to plan, execute, and review method validation protocols, ensuring compliance with applicable guidelines (e.g., ICH, FDA, EMA) and company procedures, while meeting regulatory standards for intended use.

3. Support on the process validation on the manufacturing of the product.

4. Any other area of responsibilities that the company deems necessary.

Job Description:

• The incumbent shall thrive as part of the performing sales team and will be responsible to attain the set team/individual sales budget, with revenue from product based, leasing and/or solutions-based sales.
• Possess strong sales management skills including but not limited to, tracking and attainment of sales revenue / margin based on forecast, negotiation skills to address all parties’ needs to obtain win-win status, account servicing skills with return customers / account receivable mindset.
• Build and maintain new / existing customers bases through strong market knowledge, strong partnership and engagement.
• Liaise closely with Service Operations teams to ensure reliability, availability and serviceability.
• Maintain team-based spirit with continuous market data and customer information exchange among the team to bring strong value to the Organization and Sales Dept.

Experience, Skill and Competency required:

• 1-3 years of pre-sales, technical sales or sales of construction equipment (such as Forklift, Excavator, Drilling Rig, Crawler Cranes) in construction / engineering industry. Interested applicants who do not possess construction equipment sales background but have ability to demonstrate the competency to be successful on this role, are welcome to apply.
• Candidates with Diploma in Engineering related background will have an advantage.
• Entail strong problem-solving mentality to anticipate customers’ enquiries, help them find solutions and create good value to the business partnership.
• Demonstrate persistency, consistency and adaptability to strive for success.
• Exhibit good negotiation and communication skills to manage all parties’ interests.
• Possess self-motivation and confidence to excel in various business scenarios.
• Possess own car and with valid Singapore Class 3 driving license.

Role:

Foreperson (Renovation / Construction)

• Singapore Based (Kaki Bukit)
• 5 Days work per week (8am to 5pm)
• Salary Range: Basic $2000 - $3000 + Performance Bonus
• Minimum 2 years of experiences in interior or commercial renovation.
• Career Progression Opportunities

Responsibilities:
Oversee on site operations, leading the teams to ensure timely completion of work.
Manage and guide workers to ensure all tasks are perform in compliance with SOP.
Report the project progress to the project manager, ensuring the project run smoothly and provide necessary support at the same time.
Responsible for resolving issues at the work site.

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Job Description:

• The incumbent shall thrive as part of the performing sales team and will be responsible to attain the set team/individual sales budget, with revenue from product based, leasing and/or solutions-based sales.
• Possess strong sales management skills including but not limited to, tracking and attainment of sales revenue / margin based on forecast, negotiation skills to address all parties’ needs to obtain win-win status, account servicing skills with return customers / account receivable mindset.
• Build and maintain new / existing customers bases through strong market knowledge, strong partnership and engagement.
• Liaise closely with Service Operations teams to ensure reliability, availability and serviceability.
• Maintain team-based spirit with continuous market data and customer information exchange among the team to bring strong value to the Organization and Sales Dept.

Experience, Skill and Competency required:

• 1-3 years of pre-sales, technical sales or sales of construction equipment (such as Forklift, Excavator, Drilling Rig, Crawler Cranes) in construction / engineering industry. Interested applicants who do not possess construction equipment sales background but have ability to demonstrate the competency to be successful on this role, are welcome to apply.
• Candidates with Diploma in Engineering related background will have an advantage.
• Entail strong problem-solving mentality to anticipate customers’ enquiries, help them find solutions and create good value to the business partnership.
• Demonstrate persistency, consistency and adaptability to strive for success.
• Exhibit good negotiation and communication skills to manage all parties’ interests.
• Possess self-motivation and confidence to excel in various business scenarios.
• Possess own car and with valid Singapore Class 3 driving license.

Requirements

• Candidate must possess at least Professional Certificate in Engineering (Environmental/Health/Safety) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Non-Executive specialized in Engineering - Environmental/Health/Safety or equivalent.

Responsibilities

The role of an Environmental Control Officer (ECO) is basically to look out for conditions/ situations in construction sites which cause environmental health problems or are likely to cause environmental health problems. He should report these conditions/ situations to the contractor together with recommendations on remedial measures to be taken to prevent recurrence.

The main areas where the ECO should pay attention to are as follows:

• Disease-bearing insects and rodents
• Proper disposal of construction waste
• Noise, air and dust pollution
• Earth littering
• Siltation of drains
• Food hygiene in canteens
• Any other environmental health matters

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Nitec in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Job Description:

· Developing and managing operational activities, including the monitoring of Workplace Safety and Health (WSH) strategies, and overseeing manpower, financial and resource plans.

· Day to day repair and maintenance job arrangement and yard operation management.

· Manage cost, quality and schedule, as well as health, safety and environmental activities for the site.

· Maximise productivity within the maintenance environment through sound scheduling and planning.

· Supervision the office team and review the job card and overtime to ensure all jobs are recorded and billed accordingly.

· Review invoices, quotation and efficiency of workers in perform their repair works.

Requirements:

· Minimum 2-3 years experience in heavy machinery industry.

· Technically background of Heavy machineries.

· Strong analytical and problem-solving abilities.

· Excellent communication and interpersonal skills.

• Oversee and keep track of project progress and identify possible delay events with mitigations solution such as re-sequencing of work etc
• Lead the construction team for all site activities
• Plan ahead and lead /coordinate all subcontractors
• Coordinate with Site Safety Team to ensure compliance with workplace safety regulations
• Review and comment subcontractor’s construction plans and programs
• Present to Client and Consultants for weekly report, site progress and planning
• Liaise with Clients, Consultants to resolve site issues

Job Requirements:

• Degree in Architecture/ Civil/ Structural Engineering or equivalent
• At least 15 years of relevant site experience for building projects with structural steel and precast, inclusive of projects with similar scale & complexity
• Familiar with Singapore Codes and Practices
• Candidate who experience in the construction/management of the following is preferred
• 50m lap pool of more than 1.2m depth
• local experience with deep excavation (6m or more)
• long span structural steel (30m or more)
• pedestrian Overhead Bridge
• projects along water courses, including waterways or water bodies
• sport and recreation facilities and/or institution projects
• Location : Punggol (Near MRT)
• Project : Sports Centre

1. Must possess Engineering degree or equivalent.

2. Must be able to co-ordinate with clients, inspectors, suppliers, workers and subcons.

3. Able to do computer aided drawing (AutoCad and sketchup)

4. Able to interpret drawing, able to generate shop drwing and cutting list.

5. Must be able to commit Saturday workdays.

6. Able to fulfill task with minimum supervision.

7. Ableto schedule daily work activities, deployment with workforce and resources.

8. Able to write Method of Statement adn Risk Assessment. Do Bar Schedule.

Key Responsibilities:

• Manage and oversee multiple marine construction projects, from initiation to completion.
• Develop and implement project plans, schedules, and budgets.
• Coordinate with internal teams, contractors, and stakeholders to ensure project requirements and specifications are met.
• Monitor progress, identify potential risks, and propose solutions to ensure project milestones are achieved.
• Conduct site inspections and ensure compliance with safety, environmental, and quality standards.
• Prepare and review project documentation, including reports, drawings, and permits.
• Stay updated on industry trends and advancements to enhance project outcomes.
• Perform other duties as assigned to support project success.

Requirements:

• Prior experience in civil engineering or related projects; experience in marine construction is a plus.
• Strong interest in exploring and building a career in the marine construction industry.
• Excellent problem-solving skills and attention to detail.
• Ability to manage multiple projects and adapt to changing priorities.
• Proficiency in project management tools, Microsoft Office Suite, and CAD software.
• Strong communication and interpersonal skills to liaise effectively with teams and stakeholders.
• Willingness to travel and work on-site as required.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Highlights

• AWS + Variable Bonus
• Birthday allowance
• Mondays to Fridays (830am-6pm)
• Kaki Bukit, Singapore

Responsibilities

• Assist sales team with the preparation of all sales and tender related documents, costings and material submissions.
• Prepare sales quotations and proposals.
• Provide sales and administrative support to the Sales Team.
• Follow up with factories on document requirements and ensuring that all submissions are properly presented and submitted on time.
• Supporting the sales team in responding to customer inquiries and assisting to resolve issues, where appropriate.
• Liaise with internal teams and colleagues from Procurement, Logistics and Finance.
• Sales order processing from Quotation, Sales Order, Purchases Order to Delivery Order.

Requirements

• Minimum 1 or 2 years of experience in project management or sales support function.
• Enjoy working with numbers and good with excel, powerpoint and words.
• Diploma in Business management or Electrical engineering
• Knowledge in Lighting Simulation Software (Relux/Dialux EVO) will be an advantage.

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Position Overview

We are seeking a skilled and detail-oriented Quantity Surveyor to join our team. The ideal candidate will play a critical role in preparing cost estimates, managing contracts, and ensuring the profitability of our facade construction projects. This position is integral to the success of project tenders and overall cost management.

Key Responsibilities

• Tender Preparation & Estimation: Analyze project requirements and prepare accurate cost estimates for facade construction projects.
  Study and evaluate architectural and engineering plans to identify materials, labor, and equipment needs.
  
• Contract Management:Review and draft contracts, ensuring compliance with legal and project requirements.
  Negotiate contract terms with clients, subcontractors, and suppliers to achieve optimal value.
  
• Cost Control & Reporting:Monitor project budgets and expenses to ensure alignment with initial estimates.
  Provide regular cost reports and updates to stakeholders.
  
• Supplier and Subcontractor Coordination:Source and negotiate with suppliers for materials and services.
  Evaluate subcontractor bids to determine the best value options.
  
• Risk Management:Identify and mitigate potential risks in cost and contract management.
  Maintain compliance with industry regulations and standards.
  

Qualifications and Skills

• Bachelor’s degree in Quantity Surveying, Civil Engineering, or a related field.
• Minimum of 3-5 years of experience in quantity surveying or estimating, preferably in facade construction or related industries.
• Proficiency in using cost estimation software and tools.
• Strong analytical and numerical skills with attention to detail.
• Excellent communication and negotiation skills.
• Knowledge of construction contracts, procurement processes, and legal regulations.
• Familiarity with facade systems and materials is a plus

-------------

Send me your resume via WhatsApp ❤

WhatsApp: (https://api.whatsapp.com/send?phone=6592377799)

I regret to share that only shortlisted candidates will be notified. www.dadaconsultants.com

EA Registration Number: R22108564

Data provided is for recruitment purposes only

Business Registration Number: 201735941W.

Licence Number: 18S9037

Our client is a specialist contractor in Singapore, known for delivering expert excavation services.

• Handle all construction contracts.
• Ensure compliance with requirements and provide admin support to project teams.
• Monitor contract performance and resolve any issues.
• Keep comprehensive contract records and documentations.

Requirements:

• ITE and above
• At least 2 years of admin experience in Construction industry.
• Independent, meticulous and has an eye for detail.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Quality Inspector (Jurong East)

working hours: 5 days - 8am - 5.30pm + evening/ weekend OT

base salary + OT pay + 1 month AWS + company shuttle bus (no VB)

Focal point for inspection queries and scheduling of inspection activities. Ensures conformance of materials, purchased parts and manufactured parts in alignment with quality control plans, specifications, processes and standards. Adds value by ensuring products and services are delivered in compliance with customer expectations.

Job Responsibilities:

• Unboxing, unwrapping and preparing of items for inspection.
• Execute in process and/or final inspection of materials, purchased parts and manufactured parts to ensure conformance with quality control plan, procedures, documentation and standards.
• Review and ensure manufacturing work orders and associated documentation is completed and processed correctly in a timely and efficient manner.
• Monitor and ensure callibration of equipment, work areas are kept clean and appropriate PPE and best practice lifting practices are adhered to at all times.
• Prioritise inspection activities in alignment with delivery objectives.
• Effectively communicate non conformance issues to engineering / production expedites solutions as necessary to support delivery objectives.
• Attending production meetings.
• Completing of non scheduled urgent inspection tasks within the completions business.

SKILLS & QUALIFICATIONS:

• Comfortable working at Penjuru, Jurong East area. Company shuttle service provided
• Min NDT/ NDE/ SPM/ secondary education level
• 1-2 years' experience in manufacturing facility/ quality inspection/ industrial/ engineering
• Experience in manufacturing workshop processes and controls.
• Competent is reading and understanding engineering drawings, processes and procedures.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

About the job

Company Description

Explore the future of communication and finance with Vama – a cutting-edge app that integrates instant messaging and secure payments, incorporating the latest Fintech technology.

Role Description

This is a full-time on-site role for a Software Quality Assurance Engineer at Vama in Singapore. The Software Quality Assurance Engineer will be responsible for software quality, quality assurance, software development, manual testing, and ensuring the highest quality of software across mobile (iOS and Android), desktop (React Electron), and cloud platforms (GCP). You will work closely with development teams to create and execute test plans, identify bugs, and ensure a seamless user experience.

Key Responsibilities:

• Designed, developed, and executed detailed manual test plans, test cases, and test scripts for iOS, Android, and React Electron desktop applications.
• Perform functional, regression, and exploratory testing to identify defects and ensure product stability and performance.
• Collaborate with cross-functional teams, including developers, product managers, and designers, to understand product functionality and requirements.
• Participate in test planning, estimation, and coordination of testing activities within an Agile development environment.
• Identify, document, and track bugs using QASE or similar test management tools.
• Verify bug fixes and ensure they meet the required specifications.
• Integrate testing processes with continuous integration pipelines (CircleCI) for improved development workflows.
• Ensure proper documentation of testing results and provide feedback for product improvements.
• Test cloud-based applications hosted on Google Cloud Platform (GCP), ensuring scalability and performance requirements are met.

Requirements:

• Experience in Manual Testing: Proven experience in manual testing across web, mobile (iOS/Android), and desktop (React Electron) applications.
• GCP Expertise: Strong knowledge of Google Cloud Platform (GCP) and testing cloud-based applications.
• Mobile Testing: Experience in testing mobile applications on iOS and Android platforms.
• Desktop Testing: Experience with desktop applications, particularly React Electron.
• Test Management Tools: Proficiency with QASE or similar test management platforms for documenting and managing test cases.
• Continuous Integration Tools: Hands-on experience with CircleCI or other CI/CD tools.
• Strong Analytical Skills: Ability to analyse complex systems, debug issues, and provide detailed reports.
• Attention to Detail: A meticulous approach to testing to ensure all edge cases are covered.
• Collaboration: Strong communication skills and ability to work in a team-oriented environment.

Qualifications

• Software Quality, Quality Assurance, and Software Quality Assurance skills.
• Experience in Manual Testing and Software Development.
• Strong analytical and problem-solving abilities.
• Knowledge of testing methodologies and tools.
• Effective communication and collaboration skills.
• Attention to detail and accuracy.
• Bachelor's degree in Computer Science or related field.
• Certifications in quality assurance are a plus.

Job Description:

· Developing and managing operational activities, including the monitoring of Workplace Safety and Health (WSH) strategies, and overseeing manpower, financial and resource plans.

· Day to day repair and maintenance job arrangement and yard operation management.

· Manage cost, quality and schedule, as well as health, safety and environmental activities for the site.

· Maximise productivity within the maintenance environment through sound scheduling and planning.

· Supervision the office team and review the job card and overtime to ensure all jobs are recorded and billed accordingly.

· Review invoices, quotation and efficiency of workers in perform their repair works.

· Technically strong on the repair and servicing of china brand heavy equipment.

Requirements:

· Minimum 2-3 years experience in heavy machinery industry.

· Technically background of Heavy machineries.

· Strong analytical and problem-solving abilities.

· Excellent communication and interpersonal skills.

Duties and Responsibility:

- Attend conferences and training as required to maintain proficiency

- Ensure safety compliance and Quality Control

- Follow up master line program and closely monitor site progress

- Lead and manage project team

- Plan construction schedule and oversee implementation at site

- Prepare and review of construction drawings, technical proposal and method statements.

- Liaise and coordinate with client, QS, authorities, subcontractors

- Liaise and meet with client for construction project

- Manage changes to the project scope and project schedule

- Provide for site safety and security

- Report and escalate to management as needed

Job requirement:

- At least 5 years experience as a Construction Project Manager

- Meticulous with good communication, interpersonal and leadership skills

- Strong technical knowledge and capability to solve site issues

- WSQ RA Leader Risk Management Cert, SMO, BCSS, Work-At-Heigh (Supervisor), Scissor Lift (Supervisor) and Boomlift Certificate (Supervisor) requirement.