Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

1. Conduct daily checks to ensure that vehicles are in good and safe conditions

2. Responsible for sending sand, soil & etc to construction site

3. Ensure timely collection and delivery of goods

3. Loading and unloading work

4. Responsible for carrying out routine maintenance of company vehicle ensuring that it is in good working condition at all times

5. Comply with LTA Road Safety and traffic regulation and also the sites safety regulation and requirement

6. Carry out any other duties/works instructed or assigned by superior

Scope of works and key responsibilities:

1. Pre-Construction Stage:

• Cost Planning and Estimating:Prepare initial cost estimates based on design drawings and project specifications.
  Provide detailed and accurate quantity take-offs from drawings (e.g., for materials, labor, and overheads).
  Advise on cost-effective alternatives for materials and construction methods.
  Develop cost plans that align with the client’s budget.
  
• Tendering and Procurement:Assist in the preparation of tender documents and the selection of contractors.
  Review and analyze tenders submitted by contractors and subcontractors.
  Prepare cost comparisons for tender evaluation.
  Assist in selecting the most suitable contractor based on cost and capability.
  
• Value Engineering:Conduct value engineering workshops to identify areas for cost savings without compromising quality or performance.
  Provide alternative solutions or materials that can reduce costs.
  

2. Construction Stage:

• Monitor the progress of construction works
  Maintain detailed records of all project costs, including materials, labor, plant, and overheads.
  Provide regular reports to the client and project team.
  
• Prepare interim payment certificates
  Verify claims for progress payments
  
• Assess and manage variations (changes in scope of work, design alterations, unforeseen circumstances).
  Quantify and price variations and ensure they are properly documented.
  

3. Post-Construction Stage:

• Prepare and agree on the final account with contractors once the project is completed.
  
• Provide a detailed post-project cost analysis comparing the final cost with the initial budget and estimates.
  
• Assist in resolving any contractual disputes between the client and contractor if any.
  

Responsible for pre-contract and post-contract quantity surveying duties for MEP Works including preparation of cost estimates, procurement and tendering, tender evaluation, cashflow forecast, contract administration, variation, final account, etc.

Manage the MEP Works taking off from drawings and pricing for cost estimates, tender documents, etc.

Leading and coaching junior staff in delivery of services, including checking on the works done by junior staff

Collaborate and develop good relationship with clients and stakeholders internally and externally

Measuring and taking off quantities, liaising and negotiate with sub-contractors and suppliers

Attend meetings and site inspections when required

Comply with the Company’s QA requirements and best practice

Establish client’s requirements and undertake feasibility studies

Attend onsite and consultants’ meetings and liaise with clients, architects and associate consultants in the administration of projects

Able to Source and Liaise with Site Personnel, Suppliers, Sub-contractors, Consultants and/or Architects for all project-related matters.

Interpret engineering drawings and specifications to calculate project costs

Prepare various contracts and nominated sub-contracts for tender and contract formalization

Measure and take off quantities for architectural and structural work elements

Administer pre and post contract and consultancy work

Assess variation orders, prepare interim valuations, cost plans and budget studies

Valuing completed work and arrange payments

Provide advice on contractual claims

Knowledge/ Skills/ Abilities:

Good verbal and written communication skills.

Good working knowledge of contract/ commercial law.

Good knowledge of construction products and materials.

Ability to interact with various stakeholders, such as suppliers, vendors, contractors, clients, etc.

Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/ projects at one time.

Strong organizational and interpersonal skills.

Ability to understand and analyse construction costing information.

Ability to maintain confidentiality, impartiality and discretion.

Job Requirements:

· Candidate must possess at least a Bachelor’s Degree/ Diploma in Electrical Quantity Surveying or its equivalent.

· 5 years and above experience as QS in Singapore.

· Proven ability in contract negotiation, contract administration & variation orders

· Competent in software skills MS Office and AutoCAD.

· Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines

· Able to start work immediately is an advantage

· Prepares and submit shop drawings / As Built Drawings.

· Attend all coordination meeting regards to technical issues.

· To support Marketing, QS / Project Departments in technical enquiries.

· Able to manage the process from sample submission, production such as cutting list or fabrication drawings etc.

· Able to manage & liaise with sub-contractors, Main-contractors and client’s engineers.

· Project filing or drawings in Soft Copy and Hard Copy is required

· Create any freehand drawings / sketches to initiate preliminary drawings, including of cutting list

· Studies and examines drawings and specification of tender requirement.

· To attend on going site meeting and liaise with contractors, suppliers and clients to meet the requirements of the ongoing tender/project works

· To oversee the design department and give support to junior drafter

· Any other tasks assigned by superior

Job Responsibilities:

• Lead in Site Coordination with all trades.
• Prepare submission of shop drawing / Materials / MOS.
• To ensure work is construct in accordance with contract and drawings.
• Planning of Arch. Works and micro scheduling with other disciplines.
• Liaise with sub-contractors, suppliers and etc.
• Implement and ensure QC plan with Quality and Service Dept.
• Procurement and Monitoring of Arch. related materials.
• To carry out inspection/trade demo/ material testing / mock up
• To ensure tiles/walls lay according to setting out plan.
• To verify VO and prepare back charges.
• Attend sub-con meetings.
• To check and ensure compliance with TOP check list and RI (Arch)
• Attend to archi materials, sample board, trade demo and shop drawings submission and submittal reviews comment from consultants.
• To update Arch. progress with scheduling tools.
• Other adhoc duties as assigned by the Immediate Supervisor/ Management.
• Ensure work activities are carried out in safe working environment.

Job Requirements:

• Diploma/ Degree in Civil or a related discipline recognized by the PE Board.
• Relevant qualification of certificates in structural and architectural discipline (eg: NCCS, BCSS, Safety or Lifting).
• Minimum three (3) years’ of relevant experience.
• Able to lead the sub-contractors to ensure smooth progress of works, high quality standards and minimal defects.
• Preferably completed QM project and registered as Coretrade foremen.
• Good knowledge of archi specs and BCA quality requirements.
• Proficient in Microsoft Office and knowledge of BIM.
• Willing to travel around project site offices within Singapore.

Position: Temporary O&T Financial Control (Invoice Processing Team)
Location: Tampines (Opposite MRT)
Working Hours: 9:00 AM - 6:00 PM, Monday to Friday
Salary: Up to $2,500 per month

Contract Duration:
3 months, until the end of January 2025

Key Responsibilities:

• Perform daily invoice checks in compliance with financial policies and procedures.
• Ensure timely and efficient handling of invoices to maintain smooth financial control.
• Support the Invoice Processing Team with essential operational tasks.

To apply: Email your resume to:

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines.

This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations.

The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Role Purpose

Working with our multi-disciplinary Southeast Asia and regional team, we are seeking a resilience professional who can flexibly work across multiple consulting projects, including crisis management, business continuity, organisational resilience and security risk management to help our clients build secure and resilient organisations. You will understand corporate risk management culture, crisis management / business continuity industry best practices and standards and be comfortable advising and engaging at all levels.

Role tasks and responsibilities

• Conduct physical and technical security reviews and security risk assessments in line with industry good practice and standards (including ISO 31000:2018 and HB 167:2006).
• Help clients enhance organisational resilience through the development and delivery of crisis management and business continuity plans and training workshops.
• Provide technical expertise and logistical support to cross-functional teams engaged in solving complex client problems, including security strategy, governance and resilience projects.
• Engage in client meetings, interviews and facilitate training workshops and be the trusted adviser for security and crisis management related projects.
• Prepare detailed, high-quality reports and presentations and develop concise proposals tailored to meet and exceed client expectations.
• Lead local projects and support the crisis and security consulting team in the delivery of a range of regional and varying projects.

Experience

Essential

• Experience in a corporate/consulting environment working with multinational companies in Southeast Asia / Asia.
• Experience in resilience, crisis management, business continuity and/or security risk management.
• Strong verbal and written presentation and communication skills.
• Ability to build relationships with clients and other consultants globally.
• Experience in a multi-cultural environment and demonstrated cross-cultural awareness.
• In depth knowledge of operational conditions in Southeast Asia / Asia.

Preferred

• Project management skills and certification
• Basic knowledge of information security/cyber security
• Experience working in multi-disciplinary teams

Qualifications and Specialist Skills

Essential

• Significant professional experience in a related field (crisis management, business continuity, security, etc.).
• Completed a university degree in a relevant field, including, but not limited to, strategic and security studies, international relations OR currently undertaking related studies.

Preferred

• Project management experience and/or certification
• Business continuity management and crisis management specialist skills
• Qualifications in standards specific to business continuity management, and or security management (e.g., BCI/CBCP certifications etc.)

• MNC Company
• Basic $2500 - $3200 + Allowance + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8.30am to 5.15pm
• Jurong Island. Company Transport provided
• Training provided for those without/lesser experience

Job Responsibilities:

• To perform routine analysis of polymer testing & wet chemistry analysis
• To ensure that tests assigned are performed in a timely manner in accordance with validated test protocols and procedures
• To perform instruments’ calibrations, maintenance, and troubleshooting
• To perform housekeeping and maintain the cleanliness in the laboratory
• To perform inventory check & improvement idea in the lab
• To assist superiors with non – routine study samples and any other tasks assigned

Requirements:

• Diploma in Chemical Process Technology / Chemical Engineering
• Willing to work overtime when required

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Construction Worker/General Worker
• Working Location: Sembawang/Island Wide
• Working Hours: 5.5 days (Monday to Friday 9 AM – 6 PM, Saturday 9 AM – 1 PM)
• Salary Package: Salary $1,000 per month (hourly basis) + OT
• Duration: Permanent

Key Responsibilities

• Perform a variety of tasks involving physical labor at construction sites.
• Assist in loading and unloading building materials and equipment.
• Operate hand and power tools of all types, including air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment.
• Clean and prepare construction sites by removing debris and possible hazards.
• Dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble and debris.
• Mix, pour, and spread concrete and other materials.
• Follow construction plans and instructions from supervisors or more experienced workers.
• Measure and cut materials to specified dimensions.
• Assist in the installation of structures and fixtures, such as windows, doors, and frames.
• Perform minor repairs on existing structures.

APPLY NOW!!!

• Minimum NITEC or equivalent qualification.
• Previous experience in construction or general labor is a plus.
• Has knowledge in electrical is advantageous.
• Ability to operate a variety of tools and machinery.
• Good physical condition and stamina.
• Ability to follow instructions and work independently and as part of a team.
• Knowledge of basic safety regulations and procedures.
• Willingness to work in various weather conditions and environments.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67193 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

· Quality Control is responsible for the activities at the plant by the inspection, sampling, and disposition of products used in the manufacturing processes throughout the organization.

· As a member of the Quality Control department, a Quality Control Analyst will be expected to successfully execute the responsibilities relating to the sampling, testing, and inspection of all product lots received by the quality control department. These activities include Chemical raw materials, component inspection, and final packaging.

Responsibilities include:

· Demonstrate proficiency in a task by completion of an On the Job Training.

· Maintain proficiency in training per curricula on all governing procedures.

· Perform all aspects of QC responsibilities as it pertains to release activities that will include but is not limited to: sampling, testing, and disposition of raw materials and final packaging/ component lots

· Support additional areas of QC including Rejected, Quality Hold, and Non-conforming materials.

· Perform all activities adhering to strict cGMP guidelines

· Maintain on-time completion of all training requirements

· Perform simple laboratory instrument up keep including the cleaning, calibration, and the preventative maintenance of the instrument as outlined within the departments governing procedures

· Participate in department initiatives to support the continuous improvement of the quality systems of the QC department

· Practice safe work habits and adhere to safety procedures and guidelines

Requirements:

• Min Degree in Science or equivalent with at least 2 years of relevant experience in the pharmaceutical / chemical industry.
• Experience in operating laboratory equipment such as HPLC, GC , KF Titrators.
• Working knowledge of cGMP and regulatory requirements related to Quality is an advantage
• 5 days office hours

If you are interested in the position, do kindly drop your most updated resume to [email protected] (Attn: QC Analyst)

Thank You.

Leon Leong De Cong
R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

1. Involve in Programming, Scheduling, and Progress tracking of projects·

2. Co-ordinate with Site Supervisor and Sub-contractors on progress matters and prepare monthly and weekly reports·

3. To develop, monitor, and review equipment and manpower deployment plans for project sites·

4. To perform monthly/weekly/daily project progress reporting activities·

5. To monitor the progress of projects and Update the management for any schedule variances·

6. Act as a point of contact and communicate project status to all participants·

7. Any other ad-hoc assignment being assigned from Superior·

8. Knowledge of Plumbing/Sanitary Works an added advantage.

• Tracking projects status and follow-up with team for the action items
• In-charge of project team timesheets and keep track of billing status
• Assist Project Manager in coordinating issued sales and purchase related documents (invoice）
• Responsible of general administration function
• Provide administrative support to teh accounting department
• Daily update in Google Spreadsheet
• Stock taking
• Administrative works about general workers
• Submission for project documents to related parties

• Basic knowledge on Accounting (AP,AR)
• Check and verify suppliers' invoices before input into system
• Update of daily collection ledgers
• Maintain proper accounting records
• Assist in issuing sales invoices and official receipt
• Track vouchers and maintain voucher tracking list
• Any other ad-hoc duties as assigned

·Supervising and oversee the direction of the project (or a package), ensuring that the client's specifications and requirements are met, review pogress and liase with quantity surveyors to monitor costs;

·Liaising with the main-contractor, other construction professionals;

·Coordinating and supervising construction workers;

·Selecting tools and materials;

·Making safety inspections and ensuring construction and site safety;

·Assessing and minimising risk;

·Finding ways to prevent problems and to solve any that crop up.

• Experience and skilled carpentry on residential and commercial projects
• Able to read and understand detailed drawings
• Able to independtly fabricate and install carpentry works on and off job sites
• Able to use tools, machines, electric saw
• Able to work on night/weekend/holiday for commercial projects
• Able to follow safety rules and regulations
• Able to keep and maintain clean and hygiene on and off job sites

• Report on teh status of accounts payable and receivable
• Invoice preparation and follow-up, financial statement reconciliation
• Update internal accoounting databases and spreadsheets
• Responsible for management and budgeting of cash flows
• Review effectiveness of internal controls with respect to payment cycle
• Updating of cashbook and timely posting to teh General Ledger
• Assist in the monthly closing of accounts including preparation of accounting journals and quarterly GST filing
• Handle general office adminsitration matters
• Asssit in other ad-hoc projects as required

Job responsibilities:

· • Overall project planning, schedule and executing the delivery of projects within time, budget and Client’s expectations.

· • Monitoring progress and identifying critical activities to expedite smooth progress of works on site to meet targets.

· • Coordinate internal resources and third parties/vendors e.g. Consultants and Sub- Contractors/Suppliers for the flawless execution of all projects.

· • Ensure that all projects are delivered on-time, within scope and within budget.

· • Ensure that work are executed in accordance with approved plans/drawings, contract specifications and regulatory requirements.

· • Ensure resource availability and allocation.

· • Develop detailed project plan to monitor and track progress.

· • Manage changes to projects’ scope, schedule and costs using appropriate verification techniques.

· • Perform risk management to minimize project risks.

· • Measure project performance using appropriate tools and techniques.

· • Create and maintain comprehensive project documentation.

· • Responsible for the overall project management, planning & control, and execution, including project budget evaluation and profitability.

· entify and comply with all applicable statutory/regulatory requirements related to the project.

· Lead a team of professional and technical staff in planning and execution of day-to-day operations to achieve all key project target.

· Respond swiftly to work delays, emergencies, and other problems.

· • Report and escalate to Management as needed.

· • Any other duties that may be assigned.

· Requirements:

· • Proven at least 3 years of working experience in project management in the public and private residential, government and commercial building projects.

· • Solid technical knowledge related to structural, architectural (finishing) or M&E works.

· • Solid organizational skills including attention to detail and multi-tasking skills.

· • Excellent written and verbal communication skills.

· • Excellent team player with ability to meet tight deadlines.

Job description

Supports HR in matters relating to manpower administration, adhering to Ministry of Manpower rules and regulations.

- Process SP/ WP/ EP application, renewal, cancellation and update MOM of any changes of foreign employees’ particulars.

- Update and maintain project employees’ record.

- Preparation of monthly payroll.

- Checking staff attendance including MC and keeping proper records of Staff’s Leave Entitlement

- Assist HR in recruitment exercise to support and maintain the organisation’s manpower needs.

- Arranging training course and upgrading programmes for employees as required.

- Perform any HR-related duties requested by Reporting Supervisor.

Job Requirements:

Entry Level ITE / Poly Candidates may apply

Training will be provided, no prior experience required.

Office Software

Work Location:

At Bugis

To Apply

Please submit your resume in Microsoft Word and indicate the below information:

Current Salary & Expected Salary

Availability to Commence Work

Type of Projects handled.

Roles & Responsibilities

1. Responsible for design work from project planning to completion
2. Assist team for developing design concepts and coordinating project documentation
3. Creating layout plans and detailed design drawings using AutoCad
4. Coordinate with suppliers and subcontractors to facilitate project work progress
5. Perform other related duties as and when required

Requirements

• Minimum 1 year experience in related field
• Able to work independently
• Responsible and self-motivated
• Good communication skills
• Team player

Responsibilities:

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades eg M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural / civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements:

• Diploma or Degree in Civil / Structural Engineering / Building
• Min 3 years structural coordinator experience
• Good knowledge of Structural specifications & requirements

• Attend site survey/visit with contractors
• Prepare project documentation (MOS, RA, SWP, permits…)
• Coordinate deliveries to site
• Coordinate site activities with contractors
• Supervise works by contractors
• Maintain safe working environment onsite
• Ensure good housekeeping onsite
• Manage and track work schedule
• Communicate with internal and external parties to ensure smooth project implementation.

Requirements:

• Minimum 8 years of relevant experience in construction industry
• Able to read and understand technical drawings.
• Good team player and communication skills.

Job Description

• Assist and work closely with internal teams.
• Collaborate with sales, contractors and project managers on projects.
• Perform data-entry, documentation, printing and filling of documents.
• Compile and prepare reports on weekly and monthly basis.
• Update maintenance quotation control file records
• Preparation of variation orders, purchase orders etc

Requirement

• Min GCE ‘O’ Level
• 2 to 3 years admin support experience in Construction industry
• Good Customer Service Skills
• Proficient in MS Excel and Words
• Able to multi-task, meticulous and independent
• Able to start work on short notice