-Must be able to work night shift and split shift

-Must be able to work extra hours if needed

-Serves as the link between direct reports and middle / upper management.

-Plans production operations, establishing priorities and sequences for manufacturing products, utilizing knowledge of production processes and methods, machine and equipment capabilities, and human resource requirements and capabilities.

-Makes decisions on job assignments and work priorities

-Reviews production and operating reports and resolves operational, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays and downtime.

-Responsible for equipment condition and department housekeeping

-Researches, complies and prepares reports, correspondence, and other information required by management, as well as, identifies and resolves report discrepancies or errors.

-Works with employees to maintain a safe work environment. Leads and supports direct reports to work in a safe manner and to seek improvements in work practices.

-Ensures that product quality and production efficiencies meet or exceed established standards.

-Examines procedures and recommends changes to save time, labour, and other costs and to improve quality control and operating efficiency.

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Job Responsibilities :

• Liaise with client and develop design concepts and basis of design to set direction of design.
• Check engineering deliverables and assure technical integrity of design.
• Ensure all engineering works comply with all relevant Statutory standards, Regulations and Codes of Practices.
• Carry out various types of geotechnical design and analysis – deep excavations, shafts, tunnels, slopes, foundations, etc.
• Carry out appropriate design of structural nature where required.
• Performs other duties or projects as assigned.

Job Requirements:

• Minimum eight (8) years of geotechnical engineering experience with Degree in Civil Engineering recognised by the PE Board or qualification acceptable to the Commissioner of Building Control and eligible for application as a Resident Engineer
• Recognised Degree in the relevant field subject to the acceptance of the Engineer
• At least five (5) years of experience in construction supervision of geotechnical work for projects of similar scale, complexity and nature of work.
• Experience with LTA projects would be advantageous.
• Ability to thoroughly analyze and research information.
• Excellence written and verbal communication skills

Job Description:

• Carry out land and engineering surveys required for the construction projects, site boundaries or land titles.
• Survey, establish demarcations and guide for construction to proceed.
• Check and compute the pre-computation prior to any setting out for field surveyors.
• Verify accuracy of survey data, measurement, and calculations.
• Ensure correctness of build-up according to construction plans and drawing.
• To coordinate with engineering team to prepare engineering drawings and sketches.
• Design drawings including layouts, elevations and details.
• To provide drawing modifications and advice on altering design changes to suit site condition under the guidance of Engineers.

Job Requirement:

• Degree/ Diploma in Civil / Structural / Land Surveying or Equivalent.
• At least Diploma of Surveying.
• Minimum 8 year(s) of working experience in the civil and building projects.
• Able to supervise and lead the survey team for handling all survey related issues.
• Able to provide design and shop drawings under the guidance of Engineers.
• Able to provide advices on altering design changes to suit site condition.

- Pick, pack and sorting of FMCG items for delivery

- Attend as delivery assistant when required

- Ensure accuracy when picking and packing of items

- Ensure good housekeeping and warehouse practices

- Willing to learn and improve

- 5.5 days work week

- Tuas

- Able to take company transport

- Basic +incentive + OT allowance

Responsibilities:

• Work hand-in-hand with the project team to create a mutual understanding of the project strategy based on the requirement of the job
• Must need to complete board piling opertation course
• Need to complete crane Erector course
• Conduct in-depth reviews and analysis of all project or contract documents so as to be familiar with every detail and/or requirements
• Work with safety units in a bid to plan and manage safety programs for each project and make sure that all aspects of safety are reached
• Help project managers and engineers in the arrangement and analysis of projects and scheduling of reports on projects
• Oversee projects as they are being carried out to make sure that the work is done according to outlined specifications, and that they also conform with project timetable
• Convey project needs from the project manager to the management of the firm. For example, in a case whereby extra funds are needed for the completion of a project, the project manager communicates the situation to the management of the company usually through the construction operations manager
• Assist in the maintenance, development, and enhancement of the company’s relationship with contractors in a bid to produce strategic partnership
• Train and mentor employees in areas of project management and estimating.

Requirement

Good and effective communication skills,Good analytical and organizational abilities are of great importance

• Possess good leadership ability, as well as ability to work as part of a team or even lead a team when called upon
• Ability to be proactive and also to foresee events and react appropriately towards them
• The ability to multitask and strategize in different situations is also relevant
• Ability to work and carry out projects within a stipulated time frame or deadline
• Masters degree in any management or engineering field will be an added advantage
• At least 5 years on-the-job experience in a similar role or in any other construction capacity.

• Supervise and oversee the sequencial activities of Structural, Piping & Mechanical Equipment (SMP) Installation such as Receiving, Locating in the lay down, Preservation,Foundation and Structure, Receiving from Main Contractor/Suppliers/Vendors,Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement,Touch up Painting and Hand Over.
• Must have working knowledge of all applicable piping and structure standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.
• Managing project scope and change control with commerical or without commercial impact.
• Development of procedures, flowchart or process flow, detailed calculation based on available Engineering information.
• To procure and requisition materials based on interpret construction and technical drawings.
• Communicate with Engineering/technical/quality requirement to team individuals.
• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance Departments & Subcontractors and interfaces with other REL' s Business Units.
• Working closely with main contractor and client to ensure the project meets the required needs.
• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.
• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritize from Pre-Fabrication required (e.g PTREI and Subcontractors)
• Preparation of method of statement, risk assessments for Piping, Mechanical & Steel Structure Scopes.
• Monitoring and installation supervision with Subordinates to deliver the projects in Safety, Quality and Production manners.
• To liaise with clients representative on all project issues and subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.
• Leading the supervisors and foremen in finding and executing solutions to SMP related problems on site
• Communicating with Project Management Team/QAQC Team to validate and document all changes and highlight to PM for changes that shall involve additional works
• Assist with the management of internal and external third party interfaces.

An engineering company is looking for Mechanical Engineer/ Processing Engineer

Job description

• to perform design and project management
• - supervision of site installation
• - co-ordination with customer and contractor

Requirement

• - Diploma / Degree in mechanical or chemical engineering
• - 3 years of working experience in process and equipment design calculation, equipment selection, and layout
• - Good knowledge of piping, pressure vessel, and tank design

The incumbent isresponsible to:

• Assess effectively, set appropriate goals, implement appropriate treatment plans, execute safe therapy, re-assess timely and modify treatment when necessary for patients referred for occupational therapy
• Practice within areas of professional competence and seek clinical support from supervisor and other healthcare professionals when appropriate
• Communicate and work effectively as a team with referring doctor and other members of the medical team regarding patient care
• Ensure all patients' records are updated accurately and promptly at all times
• Undertake continuing professional development of skills and knowledge proactively and regularly through self-study, continuing education presentations, case discussions and research
• Assist with clinical education of students and job training of therapy assistants
• Supervise therapy assistant or other support staff to carry out treatment

Job Requirements :

• Recognised Diploma in Occupational Therapy with 2 years of experience or Entry Level candidates with Degree in Occupational Therapy
• Conditional or Full Registration granted by Allied Health Professional Council (AHPC)

• Ensure rectification works on are carried out if discrepancies were found during the course of the inspection or being highlighted at any point of time.
• Attend complete orientation, introduction of superior, JSJD,clear scope of work for next working day on First day of work on site.
• Ensure the records of inspection details are maintained in a Register
• Attend Daily Toolbox Meetings.
• To conduct inspection within seven (7) days immediately following the last inspection done.
• To perform/execute the job in an acceptable criteria, especially Live plant.
• To be fully committed, Lead the teams and complete the task with quality in a timely manner.
• To perform housekeeping, once the work area is cleared, before move to the next work location.

• To have and maintain good daily attendance and punctuality.
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime.
• Ensure office cleaniness and file labels
• Coordinate between site admin and corporate HRD for direct workers' home leave matters.
• Coordinate between site admin and corporate HRD for employees' training matters.
• Coordinate between site admin and corporate HRD for employees' resignation.
• Assist to coordinate with site for WP renewal.
• Coordinate with Finance for payment matters and staff reimbursement and claims.
• Assist to replenish stationery, pantry items, name cards, MCR/DO/REQ form, letter head, etc.
• Other duties in administration matters and ad hoc as per request by lead / PM.
• Proactive and able to work under less supervision

The incumbent is responsible to :

• Ensures medication management in own area of work is efficient, zero-wastage and inaccordance with best professional practices
• Reviews medication orders (medication chart or prescription) for appropriateness and intervenes with prescriber or follows up where necessary
• Ensures medications received by patients are packed correctly and dispensed within target turnaround time
• Ensures that all medication related costs and revenue in own course of work are accounted for and accurately recovered where applicable
• Assigns, overseas and reviews the work of subordinates in the same area of work. Ensures that all prescription, sales, supply, storage and distribution of medications, as well as their documentation, comply with legal requirements and relevant regulations established by the relevant authorities
• Precepts and trains pre-registration pharmacists, pharmacy technicians and pharmacy/pharmaceutical students according to training plan and guidelines
• Attends and provides lectures and other forms of continuing education to pharmacy staff and other hospital employees
• Provides feedback to inform department's continuing education agenda
• Leads research or quality improvement projects in the department

Job Requirements :

• Degree in Pharmacy accredited by the Singapore Pharmacy Council
• Registered Pharmacist with the Singapore Pharmacy Council
• Minimum 2 years' experience in hospital pharmacy-related work or minimum 1-2 years' experience in hospital pharmacy-related work with a relevant postgraduate degree

Job Description:

• Coordinate and liaise with plant commissioning team on inspection, testing and repair of equipment under the maintenance team as necessary,
• Responsible for managing the maintenance activities by directing and supervising a team of personnel including contractors, supply of materials required to maintain machines and equipment in the prescribed condition.
• Ensuring the implementation of quality and safety procedures & policies, production reliability & efficiency.
• Ensuring best engineering practices by optimum use of manpower, interface & coordination with other departments regarding plant matters.
• Assist on mechanical maintenance work planning and scheduling with the engineer.
• Responsible to make individual job assignments and tracking the progress.
• Ensures quality of work within the set time frame.
• Register, control and maintenance of assets management in CMMS.
• Ensure to maintain adequate inventories of tools, supplies and parts to accurately repair all equipment.
• Ability to work as mechanical fitter on levelling, alignment, grinding, cutting, welding and lifting jobs as necessary if require.
• Ability to work as millwright on service, repair and overhaul of common equipment such as pumps, blower, etc. as necessary if require.
• Coordinate and liaise with contractors in supervision of statutory equipment inspection and testing at site.
• Coordinate and liaise with piping, lifting, scaffolding, insulation, painting and refractory contractors in supervision of piping, lifting, scaffolding, insulation, painting and refractory work at site.
• Perform with maintenance employees along with other technical personnel, contractors to develop proactive and effective team working together to attain set objectives.
• Provide job training and guidance to the workforce including MSRA as necessary.
• Arrange site check, dimension measurement, etc. to assist the engineer on improvement, modification and investment plan works including estimate manpower, tools and equipment.
• Assist manpower to storekeeper on preservation of stock items and inventory check as necessary.
• Conduct routine 5S at maintenance workshop, store and work area at site.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Diploma in Mechanical or equivalent is an advantage.
• High School Diploma or minimum 5 years of Maintenance Supervisory experience.
• Good verbal and written communication skill.
• Good working knowledge in Microsoft applications (such as Word, Excel, PowerPoint, Project).
• Experience in using Auto Cad and CMMS (Computerize Maintenance Management System) is an advantage.
• Experience in refractory repair work is an advantage.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.
• Due to Work Pass Quota limitation, hiring priorities shall be given to incumbents who do not have Work Pass Application needs.

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.

• Experience in working with Manage Warehouse Management System (WMS) to record inventory incoming/outgoing goods.
• Inspect incoming/outgoing shipments of physical cargo against shipping documents - ensure accuracy
• Update daily and timely on all transactions accurately.
• Report immediately to respective operations staff/customers if found any discrepancy.
• Well-versed with shipping documents like AWB/BL/Invoice/packing list and customs permits.
• Timely update to internal departments/customs with order reports.
• Maintain and update the Inventory Management Reports, and generate inventory reports.
• Conduct physical cycle count and stock take - monthly/quarterly/yearly.
• Computer literate and proficient in MS Word, Excel and Outlook.
• Meticulous, proactive, independent and responsible individual.
• Perform any other ad-hoc duties as assigned and physical tasks in a fast-paced environment.
• Proficiency in operating warehouse equipment such as forklift and pallet jacks (relevant certifications may be required).
• Strong attention to details and accuracy in performing tasks.

• Ensure to know project scope of works and meet the clients needs as per project standard and requirements.
• Supervise and oversee the sequencial activities of Structural, Piping & Mechanical Equipment (SMP) Installation such as Receiving, Locating in the lay down, Preservation,Foundation and Structure, Receiving from Main Contractor/Suppliers/Vendors,Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement,Touch up Painting and Hand Over.
• Must have working knowledge of all applicable piping and structure standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.
• Managing project scope and change control with commerical or without commercial impact.
• Development of procedures,flowchart or process flow, detailed calculation based on available Engineering information.
• To procure and requisition materials based on interpret construction and technical drawings.
• Communicate with Engineering/technical/quality requirement to team individuals.
• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance Departments & Subcontractors and interfaces with other REL's Business Units.
• Working closely with main contractor and client to ensure the project meets the required needs.
• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.
• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritize from Pre-Fabrication required (e.g PTREI and Subcontractors)
• Preparation of method of statement, risk assessments for Piping, Mechanical & Steel Structure Scopes.
• Monitoring and installation supervision with Subordinates to deliver the projects in Safety, Quality and Production manners.
• To liaise with clients representative on all project issues and subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.

ROLES AND RESPONSIBILITIES

• Daily Update of Project/Operation Progress to immediate superior.
• To have and maintain good daily attendance and punctuality.
• To update team member at least 2 working days in advance before going for leave , in order to minimize downtime
• Supervise and oversee the work of Electricians and Instrument Techs, responsible for training and testing, responsible for maintenance of and compliance with electrical safety program, including LOTO System.
• Must have working knowledge of all applicable electrical industry standards and recommended practices, e.g. NEC, IEEE, ANSI, ISA, NEMA, CP5 etc.
• Must have the knowledge and experience of instrumentation used to control and monitor processes in the chemical processing/Oil & Gas industry
• Must have hands on knowledge and experience with various types of instrument and electrical systems, equipment and software.
• Experience and ability to manage electrical and instrumentation engineering projects with knowledge of how to establish estimates for VO/Change Order works
• Managing, allocating resources and ensuring completion of E&I work orders
• Leading the electricians and instrument techs in finding and executing solutions to E&I problems on site
• Planning and organization of some non-capital E&I project work, including plant shutdowns/ TAR works
• Able to have understanding the control system architecture and software sufficient to find and modify elements.
• Communicating with Project Engineer/QC engineer to validate and document all changes and highlight to PM for changes that shall involve additional works
• Nominating and training Instrument/Electrical Techs capable of doing works well
• Assist to set out detailed works as per the contract drawings, ensuring checks are carried out on a regular basis
• Ensure that records are accurate and comply with organisational and legal requirements as well as project requirements
• Resolve any unexpected technical difficulties and other problems that may arise at any tim
• Produce procurement schedules for the jobs and liaise with the procurement department to ensure site have adequate resources to complete the tasks
• Produce ITP’s with QC Engineer and Task Briefings
• Produce 2 week look ahead in conjunction with the Site Agent
• Comply with company procedures and legal obligations
• Promote and comply with environmental compliance
• Deliver the works safely and to deadline
• Promote best practice for Safety, Quality and Productivity
• Ensure work is delivered defect/snag free
• Endeavour to spot and highlight value engineering opportunities and innovaive ideas and closely working with CM
• Coordinate with client and other Contractors for the project interface activities.
• Managing project scope and change control with commerical or without commercial impact.
• Monitor and ensure supervisor plan and instruct and monitor in DWI .
• Update and report daily progress status and lookahead minimum 3days plan with Supervisor.
• To Accurate and timely setting out of the works
• Timely handover of works and Quality records without outstanding defects
• Production of accurate records, drawing registers and weekly Reports
• Must have good relationship with Site team & client technical representative .

TRAINING

• To understand on SAP transaction: Invoicing Plan, GR, Budget, Actual Manhours, MRMS, Costing
• Tender Process
• To know and understand REI core business
• Project PI
• To achieve 72 training hours per year

• Location: Penjuru Place, Jurong East
• Company bus pick-up provided at MRT Jurong East, West Gate
• Competitive base salary + OT + 1 month fixed bonus, medical & insurance

Production Supervisor (internal title: Workshop Ops Supervisor) is responsible for planning , coordinating and organising work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with the Corporate policies while ensuring the safety and performance of all employees.

Job Responsibilities:

• Controlling Production and Process control to the applicable standards for overall manufacturing process as per Corporate Standards.
• Capacity and resource planning to meet daily, weekly and monthly production schedule.
• Establish method of manufacturing and determine tooling and fixturing required to produce quality parts efficiently.
• Plan and establish work schedules, assignments, and production sequences and schedules to meet production goals.
• Accomplishes manufacturing results by communicating job expectations coordinating process requirements with different functions.
• Evaluate productivity and review standard for recommended action.
• Implement lean tools and TPM on the shop floor.
• Identify training needs for operators and ensure training of personnels on production line, with respect to job, & safety.
• Interpret specifications, blueprints, job orders, and the company policies and procedures for Operators
• Direct and coordinate the activities of subordinates engaged in the production.
• Read and analyze charts, work orders, production schedules, and other records and reports to determine production requirements and to evaluate current production estimates and outputs.
• Analyzes and resolves work problems, or assists worker in solving work problems.
• Initiate or suggests plans to motivate workers to achieve work goals.
• Confer with other supervisors to coordinate operations and activities within or between departments.
• Maintain a clean and organized work area.
• Suggests changes in working condition and use of equipment to increase efficiency of shop, department or work crew.
• Confer with management or subordinates to resolve worker problems, complaints, or grievances.
• Monitor, assess and take necessary actions to keep performance of team members as per expectated parameters.
• Perform various other duties assigned by supervisor within the physical constraints of the job

Job Requirement:

• Comfortable working at Penjuru Pl, Jurong East area.
• Minimum 5 years of experience in the manufacturing sector.
• Minimum 1 year’s experience in team handling.
• Ability to effectively work with employees and supervisors.
• Good organizational and communication skills
• Should be able to work and interact with all level of personnel.
• Capable to perform basic math operations and trigonometry.
• Strong attention to detail.
• Ability to follow written and oral instructions

PREFERRED

• Prior experience of working with oil & gas industry manufacturing
• Prior experience of working with complex mechanical assembly involving machined components.
• Lean Manufacturing Knowledge

• A full time leader at site and Site Engineer work with in executing and monitoring the job scope.
• To provide leadership and to establish and maintain effective and harmonious working relationships of the on-site staff and to promote a positive project morale.
• To have a thorough and complete knowledge and understanding of the General Contract, each Subcontract, the contract drawings, specifications and addenda, and to assist the Project Management in the development of the on-site procedures.
• To examine the contract drawings, specifications and addenda for design deficiencies, impractical details, and to bring these to the attention of the Project Management.
• To assist the Project Management in the development and refinement of the Project Schedule, and to work with the Project Management to keep the schedules properly updated, and to see that the job meets the various required dates.
• To conduct Safety Tool Box Meeting on site. Ensuring daily topics are available. Assigning every Foreman and Supervisor for a daily topic as a daily routine.
• To plan and review the Construction Program with the Project Management including construction execution procedure such as Method Statement and Risk Assessment, Safe Work Procedure, also quality control procedures, safety and security practices, field office location and layout, temporary utilities, staging areas, equipment and manpower.
• To coordinate, direct, monitor, and with the Project Management/Site Engineer and the technical coordinators, (project specific as required) inspect the activities of the Subcontractors, Suppliers and labor and material.
• To verify that each Subcontractor has completed his contractual requirements as condition precedent to beginning his work at the jobsite.
• To see that all required PTW or licenses have been obtained at work site before the job starts.
• To maintain good relations and communications with all involved in the project including the public.
• To insure that subcontractor enforces their safety programs including the holding of toolbox safety meetings.

ROLES&RESPONSIBILITIES

• To carry out daily checks of the assigned vehicles before operating
• To load, unload and transport goods
• To ensure that loaded items are properly latched
• To carry out the tasks as instructed by the respective supervisor in charge
• To ensure that the receiver receives the goods/materials in good conditions and order
• To ensure that the receiver checks and inspects the goods/materials and returns the signed D.O back to HQ supervisor
• To ensure that the mobile machine is in good condition and is operated according to procedures and in compliance with the safety procedure

REQUIREMENTS

• Minimum Primary education
• Possesses a Class 5 driving licence
• Completion of WSQ Lorry Crane Operator course
• Minimum 2 years of relevant working experience in operating lorry cranes
• Basic knowledge in preventive maintenance of vehicle
• Must have Valid CraneOperation Licence

Description

Reporting to Senior Document Controller and Project Manager. He/She is responsible for ensuring all technical documents are file and maintain under the organisation document control procedures and standards.

Responsibilities

• Organizing and filing of technical documents and correspondence with internal and external customers for all document transmitted
• Control the issuance and submission of documents to Clients and ensure that timelines are duly met
• Effectively keep track and manage the flow of documentations
• Maintain confidentiality around sensitive information
• Maintain list of documents and ensure that the documentation is in good order and as per Project Quality Plan (PQP)
• File, record and maintain documents in both electronic and physical copies
• Contribute to compilation of final project dossiers, as built portfolios and archiving
• Monitoring and Updating EDCL (Engineering Document Control List) to ensure all the drawings/documents status are in latest condition Produce exception reports on late documentation for management review
• Co-ordinating drawings/documents flow between site and main office in Singapore
• Preparing in Mechanical Catalogues for submission to client
• Other general administrative tasks as assigned by Reporting Supervisor or Project Manager

Requirements

• ITE, GCE O Level or Diploma in Engineering preferred but those with relevant working experience in Oil and Gas industry is an added advantage
• At least 1-2 years’ experience in working as Document Controller
• Meticulous and proficient in MS office
• Basic analytical experience
• Proficient typing skills, good verbal and written communication skills
• Data organization and storage knowledge
• Willing to work in Jurong Island

• Daily Update of Project/Operation Progress to immediate superior
• To have and maintain good daily attendance and punctuality
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime
• Attend complete orientation, introduction of superior, JSJD, clear scope of work and necessary drawing or documents on First day of work on site
• Coordinate with client and other Contractors for the project interface activities
• Liaise with site HSE personnel to ensure corporate policies, practices and procedure one met
• Managing project deliverables in line with the project plan
• Managing project scope and change control with commercial or without commercial impact
• Monitor and ensure supervisor plan and instruct and monitor in DWI
• *Monitoring project progress and performance
• Plan monthly works schedule and set productivity to be achieved
• Prepare MSRA
• Prepare Tender Review Checklist Part 1, 2 & 3, ATQ & Notice of Tender Inquiry & Tender submission
• Prepare Vendor/Sub-Contractor Pre-qualification document & check list
• Prepare and update MRMS
• Project Planning, Progress Reports and Claims
• Proposed training for worker on live cable handling
• Providing status reports to the management
• Request and plan min Two days in advance for full PPE (if applicable), schedule of SIC, site location and contact Personal on the first day of work
• Responsible & accountable to ensure compliance with company, regulatory and client's policies and procedures. Ensure local regulations policies and procedures are incorporated into the business unit plan
• Review and monitor construction activity schedule including the analysis of costs, progress and other productivity data
• To fulfill and achieve higher weekly and daily target
• To monitor the progress of projects against planned
• To plan, monitor and ensure manpower, materials, equipment and tools are ready for day to day work activities
• To take on additional appointments from time to time assigned by the company's authorized officer, and carry out the duties of such appointment duly and diligently to enhance the company image and to improve the company's business opportunities
• To verify technical specifications for adequacy
• Update and report daily progress status and look ahead minimum 3days plan
• Working closely with main contractor and client to ensure the project meets the required needs
• Supervising the project at all stages and providing solutions to problems
• Collaborating with site managers, surveyors, engineers, site worker and other professionals

Supervisor Responsibilities:

• Making sure employees that report to you meet performance expectations.
• Giving instructions or orders to subordinate employees.
• Ensuring that the work environment is safe, secure and healthy.
• Meeting deadlines.
• Approving work hours.
• Ensure great customer service at all levels.

Supervisor Requirements:

• Previous leadership experience.
• Excellent communication skills.
• Eye for detail and accuracy.
• Reliable, with high integrity and strong work ethic.
• Ability to work as part of a team.
• Professional appearance and attitude.
• Computer literacy.
• Proactive organizational skills.
• High school diploma.
• Ability to keep a positive attitude in a fast-paced environment.

• Job function - 70% Admin 30% Customer Support
• Able to commence from Jan/Feb 2024
• Office located at Jurong East (3 mins walk from Jurong East MRT)

Administration - 70%

• Day to day administrative duties.
• Data entry, reporting and invoicing
• Manage calender and schedule of bookings
• Update spreadsheets and prepare monthly reports

Customer Support - 30%

• Answering phone calls and taking appointment bookings and etc
• Responding to Email and Whatsapp inquiries
• Attend to customers’ enquiries, and feedback  via phone calls, emails, and Whatsapp

Job Requirements

• Min GCE A' Level or Diploma in any discipline
• Fluent in English (Conversational and Written)
• Previous admin & coordination experience is an advantage.
• Detailed-oriented and resourceful.
• Possess good organizational skills and time management.
• Customer centric with good communication and interpersonal skills
• Competent in Microsoft Office, particularly in Word and Excel

If interested, please kindly send in your resume to [email protected]

Job Description

• Perform dimensional control inspection of module structure, piping, Tie in point coordinates, equipment, Flange face out using total stations and BEST FIT software
• Advise construction team on construction sequence, installation, and appropriate rectifications based on Dimensional tolerance
• Coordinate with Client inspectors for dimensional control inspections as per Inspection and test plan.
• Generate dimensional control reports and get it approved from clients
• Ensure periodic calibration of survey equipment
• Alignment, position and elevation control for the steel structure and pipeline
• Preparing a dimension inspection report for before welding and after welding

Job Requirements

• Min 3 years experience in dimensional control inspections using total stations
• Working knowledge in AutoCAD
• Understanding of Structural & piping ISO drawings
• Familiar with usage of Leica & Sokkia total stations and using dimensional control software such as BEST FIT

A Sales Supervisor plays a critical role in supporting the success of an organization. They are the leader in coordinating the day-to-day activities of the sales representatives and ensuring that they are meeting their goals. The sales supervisor must work closely with the store manager, general manager, and production manager to communicate changing customer needs. As a liaison between the organization and the customers, the production supervisor must anticipate changing customer needs and design products that meet such needs.

Sales Supervisor Job Responsibilities

• Supervise the activities of the sales team including marketing activities like product activations.
• Assist the line manager to recruit, training, enumerating, and retaining a competent sales team.
• Provide reports to top management like sales reports, lead generation reports, customer complaints reports, and new customers’ on-boarded reports.
• Prepare sales presentations and other sales tools.
• Assist the line managers to ensure adequate client communication, maintain contacts with clients and provide feedback.
• Initiate sales activities, strategies, and sales plans required to build brand visibility.
• Serve as a point of reference to employees in terms of showing great work ethic, habits, personal character, and professional character.
• Develop and maintain accurate records of prospects, leads, pricing, sales activities, and active clients.
• Controlling company marketing expenses to ensure the marketing expenditure is kept within budget.
• Attend trade shows and other marketing events and represent the organization.
• Evaluate the performance of the sales team and seek ways to improve the team’s performance.
• Identify the trends in the market, both current, and future that are likely to affect the performance of the organization.
• Ensure the items are displayed correctly in the malls, supermarkets, and other sales points.

Sales Supervisor Skills/Abilities/Knowledge

• Bachelor’s degree in a business-related course with emphasis on marketing.
• Proven work experience in marketing and achieving set targets.
• Excellent communication skills, both written and verbal communication.
• Ability to lead and motivate a sales team, and put in place measures to retain a great team.
• Excellent selling skills, ability to close deals, and deal with post-purchase anxiety.
• Excellent selling skills, people-oriented, and ability to motivate a team.
• Ability to identify potential areas of growth and identify new business partnership opportunities.
• Strong organization skills and multi-tasking skills.
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Supervisor Responsibilities:

• Making sure employees that report to you meet performance expectations.
• Giving instructions or orders to subordinate employees.
• Ensuring that the work environment is safe, secure and healthy.
• Meeting deadlines.
• Approving work hours.
• Ensure great customer service at all levels.

Supervisor Requirements:

• Previous leadership experience.
• Excellent communication skills.
• Eye for detail and accuracy.
• Reliable, with high integrity and strong work ethic.
• Ability to work as part of a team.
• Professional appearance and attitude.
• Computer literacy.
• Proactive organizational skills.
• High school diploma.
• Ability to keep a positive attitude in a fast-paced environment.