NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Research Associate. The selected candidate will innovate Optical and Metasurface Design.

Key Responsibilities:

• Responsible for optical system design and development for metasurface based SLM 3D Holograph Display, Near-Eye Display, Virtual Reality and Augmented Reality etc. applications.
• Good experience on optical lens and system (e.g. Metalens) design
• Research meeting arrangement with project PIs and researchers
• Perform and analyze material/optics characterization
• Prepare monthly reports and presentations for meetings and project deliverables.

Job Requirements:

• A Master degree in the areas of Optical Engineering and/or Photonics devices and System.
• Knowledge and/or experience in using optical simulation tools such as Zemax, CodeV etc.
• Good interpersonal skills with the ability to work independently and also in a team environment.
• Entry level candidates are welcome to apply.

We regret that only shortlisted candidates will be notified.

Skills and responsibilities:

• Utilize commercial and in-house EDA tools (e.g. Synopsys, Cadence, Siemens) for the design and implementation of 100 ~ 400 million gate integrated circuits in 7nm/5nm/3nm/2nm process technologies.
• Proficient with a full Netlist/Gates to GDS flow, inclusive of all construction stages (e.g. RTL synthesis, placement, clock tree synthesis, detailed routing, physical verification, formal verification and timing analysis) for complex digital blocks of up to 12Mgates/3M instances with embedded macros. Ability to handle multiple block assignments in parallel is required.
• Proficiency in UNIX/Linux and scripting languages is advantageous.

Required Qualifications:

• Degree, Masters or PhD in Electrical/Electronics/Computer engineering.
• Minimum of 5 years or more experience in a relevant field.

DUTIES AND RESPONSIBILITIES

• Good knowledge of interior architectural details, working drawings and construction practices
• Proficient in AutoCad, SketchUp, Photoshop, MS Office suite, Revit
• Flair in design; able to sketch fast and produce a good design concept
• Good understanding of materials cost and application
• Work closely with the project manager, design coordinators, and project teams on conceptual designs, presentations, design development, and production
• Responsible for project deliverables, meeting overall project design schedules
• Result-oriented and passionate to deliver projects successfully
• Able to work independently with a high degree of integrity
• Value support and cultivate cooperation among colleagues
• Work closely with the team and Design Lead to develop, coordinate and implement the interior design of projects from concept design to documentation and construction
• Liaison with client, sub-contractor

JOB COMPETENCY (QUALIFICATION, EXPERIENCE & KNOWLEDGE)

• A recognized Degree/ Diploma in Interior Design or Interior Architecture
• 2-5 years of local working experience
• Fresh graduates with a desire to grow professionally are welcome
• Preferable experience in the workplace
• Fluent in spoken and written English
• Strong presentation, communication & interpersonal skills
• Able to work well in a fast-paced environment
• Team player with a positive attitude
• Conversant with local codes and regulations
• Interested applicants may also apply to [email protected] for consideration

Responsibilities:

• Identify, evaluate, and negotiate optimal purchase packages with suppliers or subcontractors, focusing on quality, pricing, terms, delivery schedules, and services.
• Coordinate purchasing activities across departments and suppliers to support assigned project requirements.
• Prepare and process purchase orders and associated documentation following company policies, procedures, and specifications.
• Manage requests to ensure operational needs are met, including goods and services supply, tracking orders for timely delivery, and verifying product quality.
• Maintain up-to-date purchasing records, data, and pricing in the system.
• Monitor and coordinate the delivery of purchased items to ensure timely arrival at stores or project sites.
• Organize and manage all purchasing documentation and files.
• Liaise with the accounts department to verify invoices, pricing, and delivery confirmations.
• Provide relevant departments with quotations for tender purposes.
• Assist with accounting tasks, including matching purchase orders with delivery orders and invoices, preparing payments, and maintaining documentation and filing.

Requirements:

• Experience in purchasing
• At least 1 year of experience
• Experience in office fit-out project at advantage

Kindly email your resume in a comprehensive Word format to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Please be informed that by applying for the advertised position, the candidate is considered to have given their consent for us to collect, utilize, or disclose their personal information for the purposes related to the services we provide.

Jacqueline Goh

EA License Number: 22C1430

Registration Number: R1326664

• 5 days / 5.5 days per week
• Location: Tai Seng & Lavender (East)
• Industry: Interior Design – Furnitures

Job Scope:

• Project Planning and Scheduling: Develop detailed project plans, timelines, and schedules to ensure project milestones are met.
• Resource Management: Coordinate with designers, suppliers, and contractors to secure necessary materials and resources.
• Budget Management: Monitor project budgets, track expenses, and ensure the project stays within financial constraints.
• Client Communication: Serve as the primary point of contact for clients, providing updates, addressing concerns, and ensuring client satisfaction.
• Team Coordination: Facilitate communication and collaboration among team members, ensuring everyone is aligned with project goals.
• Quality Control: Oversee the quality of work and materials to ensure they meet design specifications and standards.
• Problem Solving: Address and resolve any issues or obstacles that arise during the project.
• Documentation: Maintain comprehensive project documentation, including contracts, progress reports, and meeting notes.
• Compliance: Ensure all work complies with relevant regulations, codes, and industry standards.
• Post-Project Evaluation: Conduct post-project evaluations to identify successes and areas for improvement.

Job Requirement:

• Candidate with experience in project operation
• Good to have working experience for the company with business in related to housing decoration/interior design, furniture/construction.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Company Summary

They specialize in comprehensive commercial outfitting, offering a wide range of services tailored to meet the needs of valued clients. Their service offering spans the entire project lifecycle, from initial design consultancy to project management and final interior fit-out. The portfolio includes retail and F&B stores, show galleries, offices, industrial and general contracting.

Location: Potong Pasir

Work Week: 5 days (9am - 6pm)

Key Responsibilities:

• To prepare tender bids for submission
• Documenting any changes in design and updating budgets
• Review and understand all drawings and specifications
• Monitor project costs to ensure objectives of the project are achieved in accordance with company standards and building contract law
• Responsible for coordination with contractors, suppliers, and other parties
• Handle pre or post-tender procurement which includes sourcing and negotiating with suppliers
• Tabulate and evaluate price comparison and prepare cost analysis / cost reduction strategies to enhance overall project value
• Handle project administration and documentation, including preparation of sub-contract, Variation Orders, etc
• Other related duties assigned by the manager

Requirements:

• Min 1 year experience in ID field
• Experience in full interior fit-out projects

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Interior Design Quantity Surveyor

• Work Location : Aljunied
• Salary: $3,500 - $5,000
• Working Hours : 9am - 6pm
• Working Days : 5 Days

Requirements:

• Diploma or Degree in Building / Civil Engineering/ Quantity Surveying or equivalent.
• Minimum 2 years of relevant working experience.
• Familiar with Auto-Cad

Job scope:

• Assist in the preparation of tender documentation and pricing
• Perform measurement/taking off quantities for Bills of Quantity, cost planning, costing and cost control
• Analyze and compare quotations of various trade elements
• Attend site meetings when required
• Generation and submission of quotations to clients based on D&B/ A&A projects, schedule of rates and / or Star Rates.
• Sourcing of quotations from sub-contractors and material suppliers.
• Assessment and preparation of contract variation orders, claims, cost studies, final accounts consolidation.
• Review and liaise closely with the Project Leader/Manager/MD throughout the process of pitching to confirmation and execution.
• Liaison with consultants, sub-contractors, relevant authorities during the entire project phase.
• Any other related ad hoc duties assigned.

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• Carefully study blueprints and sketches
• Execute measuring activities
• Cut, shape and smooth the needed material
• Build stairways, doors and window frames, partitions and rafters
• Carve and assemble furniture, kitchen cabinets, siding and drywall
• Install items where designated
• Conduct repairs and maintenance

Position title : Goldsmith

Location : Little India / Boon Keng

Working Days: 6 days a week (Must be able to work on weekends)

Working hours : 11am to 9pm

Salary : $3,500

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Key Responsibilities:

1. Designing Jewelry and Objects:Create custom designs for jewelry (rings, necklaces, bracelets, etc.) based on customer requests or original ideas.
   Sketch or use computer-aided design (CAD) software to create detailed blueprints of the final product.
   
2. Metalworking:Melt and alloy gold and other metals to achieve the desired color, strength, and consistency for specific pieces.
   Shape and mold the metal using various techniques such as casting, forging, and soldering.
   
3. Casting and Shaping:Pour molten gold into molds to create base shapes for jewelry, and refine or finish pieces through techniques like hammering, rolling, or polishing.
   Use tools such as files, pliers, and hammers to shape metal and add intricate details to the designs.
   
4. Stone Setting:Set precious or semi-precious stones (diamonds, sapphires, etc.) into the metal using various setting techniques such as prong, bezel, or pave settings.
   
5. Finishing and Polishing:Smooth rough edges and surfaces to achieve a high-quality finish.
   Polish pieces using specialized tools to enhance shine and detail.
   
6. Repairing and Restoring Jewelry:Repair damaged jewelry by re-soldering, re-setting stones, or replacing broken parts.
   Restore old or antique pieces to their original form, while maintaining or enhancing their integrity.
   
7. Quality Control:Inspect finished pieces to ensure they meet design specifications, quality standards, and durability.
   Ensure that the weight, size, and quality of metals and gemstones are as required by the customer or company.
   
8. Customer Interaction:Consult with clients to understand their preferences, budget, and desired outcomes.
   Make adjustments to designs based on feedback or specific requests.
   

Responsibilities:

• Provide administrative and back-office support to the project team.
• Prepare meeting minutes, reports, and related documentation.
• Source materials and manage procurement activities.
• Create and manage purchase orders and quotations.
• Coordinate and track project progress.
• Respond to client inquiries and complaints, attend site meetings, and assist with project handovers as needed.
• Manage incoming and outgoing project documents, correspondence, and emails.

Requirements:

• Experience in project planning
• At least 1 year of experience
• Experience in office fit-out project at advantage

Kindly email your resume in a comprehensive Word format to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Please be informed that by applying for the advertised position, the candidate is considered to have given their consent for us to collect, utilize, or disclose their personal information for the purposes related to the services we provide.

Jacqueline Goh

EA License Number: 22C1430

Registration Number: R1326664

Civil Engineer (Steel/Facade/Architectural Finishes Design)

Responsibilities:

• Responsible for the execution of civil and structural design involving the preparation of calculations, drawings and detailing.
• Coordinate with client and consultant for steel structure detailed design, shop drawing, authority submission and installation schedule.
• Support the team to design for steel structure support system.
• Involve in project planning, implementation and close monitoring of projects
• Project coordination including submission to local authorities and liaison during the construction stage.
• Any other task as designated by the management

Requirements:

• Relevant Degree recognized by Professional Engineers Board (PEB)
• Min 4 years of working experience in construction & structural steel industry
• Able to understand and prepare cutting plan, structure design and outfitting.
• Ability to work independently in a fast-paced environment.
• Effective communication and good interpersonal skills.

Interested applicants please submit your resume to [email protected]

The Workplace Design Guidelines and Standards team is looking for an experienced Senior Design Program Manager with strong cross-functional leadership skills to own the creation, implementation, and ongoing refinement of Amazon’s Global Workplace Design Guidelines and Standards for the APAC (Asia & Pacific). The Workplace Guidelines and Standards team’s mission is to deliver best-in-class, fully-integrated, accessible, and easily navigable documentation supporting the consistent design and delivery of corporate workplaces. This team ensures design practices align with Amazon’s high standards for corporate space, focusing on both innovative solutions and practical application across various design disciplines. As a Sr Design PM, you will have direct responsibility for coordinating with a wide variety of cross-functional partners to develop standards and guidelines to support new design solutions. You will act as a Subject Matter Expert, consulting with Concept Designers and Design & Construction delivery teams. You will integrate constraints and requirements from cross-functional stakeholders into efficient, scalable globally-relevant documentation that is accessible, customer-friendly, and secure. With your global and regional teammates, you will evaluate and prioritize projects in response to customer needs and technical team inputs. You bring most or all of the following to the role:

• Intermediate to advanced knowledge of building codes and accessibility standards.
• Strong behaviors in critical thinking, problem solving, issue resolution, risk assessment, and high attention-to-detail.
• Experience in managing and updating design standards and guidelines on a global scale.
• Experience in digital asset management and metadata-driven data architecture.
• Experience working in a matrixed organization.

Key job responsibilities

• Act as a regional Guidelines Subject Matter Expert (SME) by consulting with regional business partners during change requests and participate in the development of narrative justifications.
• Develop, drive adoption of, and maintain tools and procedures to accelerate the organization’s ability to adapt to changing priorities and urgent requests.
• Develop, or work with vendors to develop, standard specifications and guideline documents.
• Collaborate with peers across regions to elevate regional differences to a global perspective.
• Own the roadmap for new and revised guidelines and standards for your region.

A day in the life
The APAC Sr Program Manager for Workplace Guidelines will develop, publish, and maintain Design Guidelines and Standards. You will mainly collaborate with the Global Design Team’s APAC Design Manager, business team stakeholders, and program owners. Your Global Design counterpart will develop and publish Design Intent documents. You will review those Design Intent documents before they are finalized and act on them to translate the design to visuals and narratives that can be published as Guidelines. You may need to author - or engage a consultant to author - new documents that bridge the gap between what you receive from Design and what needs to be published in the Guidelines. A day in the life might be spent navigating and balancing multiple conversations, written requests, and constraints into visual and written instructions that help execution teams deliver outcomes aligned with Amazon’s high standards for corporate space. You work autonomously and creatively in a fast-paced, ambiguous environment. As a senior leader in the organization, you also role model best practices, influencing and operating at all levels - technical and non-technical - to overcome obstacles and deliver results. Your attention to detail and ability to inspect issues and processes brings simplified solutions to complex problems.

About the team
The Global Real Estate and Facilities (GREF) team provides real estate transaction expertise, business partnering, space and occupancy planning, capital investment program management, facility maintenance, and operations in more than 60 countries. GREF is organized into three pillars: Regional Portfolio Management, Global Centers of Enablement, and Global Centers of Expertise. Workplace Design and Construction sits within the Global Centers of Excellence and includes the disciplines of Global Design, Workplace Guidelines, Business Development, Global Integrated Facilities Management, and regional Design and Construction (D&C) delivery.
The Global Design team owns the design of GREF spaces, shaping design concepts that align with GREF’s strategic vision and brand identity, while enhancing employee well-being. Ultimately this team defines spaces that best support the way Amazonians work. The team’s regional Design Managers ensure that GREF design concepts and standards are seamlessly integrated into new, and renovation, projects.
The Workplace Guidelines team owns the creation, implementation, and ongoing refinement of Amazon’s Global Workplace Design Guidelines and Standards, ensuring regional teams have comprehensive documentation to support delivering and refreshing spaces that best support how Amazonians work in the office. This team includes global furniture, fixture and equipment (FF&E) development and implementation, as well as signage and wayfinding guidelines and standards.
The Design & Construction (D&C) delivery team delivers world-class spaces across the broad GREF portfolio, including new and refreshed office spaces, labs, Kuiper production facilities, studios, and spaces that we don’t yet know the businesses need. The team includes regional leaders and Global Construction Operations, as well as GREF Information Technology.
Inclusive Team Culture: Here at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. We have ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences. Amazon’s culture of inclusion is reinforced within our 14 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious, and earn trust.
Work/Life Balance: Our team puts a high value on work-life balance. It isn’t about how many hours you spend at home or at work; it’s about the flow you establish that brings energy to both parts of your life. We believe striking the right balance between your personal and professional life is critical to life-long happiness and fulfillment. We offer flexibility in working hours and encourage you to find your own balance between your work and personal lives.
Mentorship & Career Growth: Our team is dedicated to supporting new members. We have a broad mix of experience levels and tenures, and we’re building an environment that celebrates knowledge sharing and mentorship. We care about your career growth and strive to assign opportunities based on what will help each team member develop into a better-rounded contributor.

Basic qualifications

• 5+ years of design program management experience
• Experience escalating issues, anticipating and making trade-offs, balance the business need versus other constraints and maximize business benefit while building great customer experiences
• 3+ years of experience in design program management for physical building (design/construction) programs, demonstrating progressive responsibility and increased scope.

Position title : Goldsmith

Location: Farrer Park

Working Days: 6 days a week (Must be able to work on weekends)

Working hours : 11am to 9pm

Salary : $3,500

Key Responsibilities:

1. Designing Jewelry and Objects:Create custom designs for jewelry (rings, necklaces, bracelets, etc.) based on customer requests or original ideas.
   Sketch or use computer-aided design (CAD) software to create detailed blueprints of the final product.
   
2. Metalworking:Melt and alloy gold and other metals to achieve the desired color, strength, and consistency for specific pieces.
   Shape and mold the metal using various techniques such as casting, forging, and soldering.
   
3. Casting and Shaping:Pour molten gold into molds to create base shapes for jewelry, and refine or finish pieces through techniques like hammering, rolling, or polishing.
   Use tools such as files, pliers, and hammers to shape metal and add intricate details to the designs.
   
4. Stone Setting:Set precious or semi-precious stones (diamonds, sapphires, etc.) into the metal using various setting techniques such as prong, bezel, or pave settings.
   
5. Finishing and Polishing:Smooth rough edges and surfaces to achieve a high-quality finish.
   Polish pieces using specialized tools to enhance shine and detail.
   
6. Repairing and Restoring Jewelry:Repair damaged jewelry by re-soldering, re-setting stones, or replacing broken parts.
   Restore old or antique pieces to their original form, while maintaining or enhancing their integrity.
   
7. Quality Control:Inspect finished pieces to ensure they meet design specifications, quality standards, and durability.
   Ensure that the weight, size, and quality of metals and gemstones are as required by the customer or company.
   
8. Customer Interaction:Consult with clients to understand their preferences, budget, and desired outcomes.
   Make adjustments to designs based on feedback or specific requests.
   

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Be part of a worldwide R&D team in designing leading edge optocoupler products from Broadcom.

• Design analog and mixed signal ICs for industrial and automotive applications.
• Work with marketing and project team in defining specifications and system architecture to meet customer requirements.
• Perform circuit analysis, simulation and design verification with Cadence tools.
• Test and troubleshoot circuit problems to fix bugs.
• Customer support on IC failure analysis.
• Support reliability and manufacturing tests for product qualification.

Requirements

• Knowledge and experience in analog and mixed signal IC design.
• Familiarity with sigma delta converter, switched capacitor filter, bandgap reference, PLL/DLL, optical transceiver and power management design will be added
• advantages.
• Bachelors and 7+ years of related experience or Masters degree and 5+ years of related experience or PhD and 3+ years of related experience
• Master's or Bachelor's degree in electrical engineering

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• Bachelor/master’s degree in Electrical/Electronic Engineering / Computer Science or equivalent
• With minimum 4 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms
• Strong communication skills, problem solving and analytical skills
• Candidate with more years of experience will be considered for a more Senior role.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Job Description

• Oversee the entire ICA design process, from concept to implementation, ensuring project is delivered on
• time, within specifications and meeting industrial standards.
• Lead and mentor a team of ICA engineers and ensuring the quality in design work.
• Oversee the development of control logic, CMS programming, HMI interfaces, and Sub-Control systems, ensuring seamless communication and synchronisation of control components.
• Oversee the selection of instrumentation, sensors, and transmitters for accurate data acquisition, measurement, and feedback control.
• Oversee the configuration and deployment of the Control Monitoring System for seamless process control and integration of subsystems.
• Ensure ICA designs adhere to relevant safety standards (such as SIL, IEC 61511) and cybersecurity protocols to mitigate operational risks.
• Collaborate with process team to optimise the processes through intelligent control strategies, adaptive algorithms, and data-driven insights.
• Coordinate validation activities, including factory acceptance testing (FAT) and site acceptance testing (SAT), to ensure systems meet performance criteria.
• Develop RFQ and collaborate with suppliers and vendors to source components, equipment, and systems required for ICA and ensuring they meet quality and performance standards.
• Oversee testing and commissioning of the CMS, coordinating with process team to ensure system operate as intended.
• Ensure clear and consistent communication with project client and consultant throughout the project, providing updates, addressing concerns and managing expectations.
• Manage ICA design budgets, including cost estimation, resource allocation, and cost control.

Requirements

• Min. of Bachelor Degree in Electrical, Process Control & Instrumentation, Automation Engineering or related engineering discipline.
• 15 years of relevant ICA engineering experience in the planning, design, SAT/FAT and construction of major waste to energy, water, wastewater, process plant projects or similar major industrial projects. The Design Lead has robust experience in managing a team of suitably experienced Design Engineers and Technicians and interfacing with Client, Suppliers and Subcontractors.
• Familiar with code of practice and standards in Singapore
• Experience with Revit/AutoCAD Plant 3D preferred & in other related design software/applications.
• Familiar with Microsoft Office Suite.
• Excellent communication skills in English, both verbal and written.
• Willingness to take on responsibility and work overtime to meet deadlines.
• Extensive hands-on experience in designing and implementing complex ICA systems in industrial environments.
• Proficiency in programming languages for PLCs (e.g., ladder logic, structured text) and HMI/DCS systems is advantageous.
• In-depth knowledge of control system architectures, such as DCS and PLC-based systems.
• Familiar with industry standards and protocols (e.g., OPC-UA, Modbus, HART, Profibus, Ethernet/IP).
• Strong understanding of process control theory, PID tuning, and adaptive control strategies.
• Experience with functional safety standards (e.g., IEC 61508, IEC 61511) and cybersecurity best practices.
• Excellent problem-solving and troubleshooting skills for resolving complex technical issues.
• Strong leadership and communication skills to guide technical discussions and collaborate with diverse teams.
• Good technical understanding of water, wastewater and WTE related control system.
• Relevant experience in design and site work for water, wastewater treatment and WTE works.
• Highly motivated and ability to work independently with minimal supervision.
• full time work at Tuas project site

Location: Redhill

Basic + Commission + VB

JD:

• Research market trends, competitor offerings, and emerging client needs within sectors like commercial office/Retail design & renovation
• Proactively seek out and generate new business leads through networking, events, industry associations, cold call and referrals.
• Draw up networking proposals customized to individual sector
• Liaison between client, designer and other parties leading up to the securing of project, while ensuring client’s requirements are met and exceeded
• Prepare sales and marketing materials
• Work on project pricing, contracts, and fee negotiations that balance profitability with competitive positioning.
• Achieve and Deliver Sales Target
• Support in all aspect of Sales activities
• Manage and maintain clientele relationship
• Collate and evaluate client feedback and highlighting client feedback from customers for management analysis and follow-up

Requirement

• Diploma in Marketing, Business, Interior Design, or a related field.
• Min 3 years of experience in Business development, preferably in the interior design on commercial office/retail.
• Strong communication and interpersonal skills, with an ability to understand design concepts & to liaise with individuals at all level
• Committed, sales target driven and self-motivated
• Responsible and team player.
• Creative mindset with a passion for interior design.
• Excellent networking & communication and negotiation skills, with the ability to liaise with individuals at all level
• Committed, sales target driven and self-motivated

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Business Function

Group Technology and Operations (T&O) enables and empowers the bank with an efficient, nimble and resilient infrastructure through a strategic focus on productivity, quality & control, technology, people capability and innovation. In Group T&O, we manage the majority of the Bank's operational processes and inspire to delight our business partners through our multiple banking delivery channels.

About CRESA

DBS Corporate Real Estate Strategy & Administration team (CRESA) is the custodian of DBS’ real estate assets while helping to drive the work culture and improve employee experience for the bank. Beyond cost & space optimization, we transform spaces using Digital and Data to foster a culture of collaboration, innovation and teamwork. At CRESA, we manage close to 4 million square feet of space, ranging from offices spaces to more than 270 retail locations both locally and globally. For office spaces, our main goal is to find and build the right spaces to allow employees to collaborate and innovate; from building social hubs to the JoySpace program, we lead in influencing the culture of the bank towards a 32k start-up. For retail locations, we source and select the best sites, negotiate for the best lease terms, and also design and build the sites to achieve the best customer journey and experiences. Above all, our team is also the guardian of the bank's sustainability programme, keeping both the office and retail locations at its best every day and to ensure we maintain and create a Better World.

About the role

As a Project and Design Specialist, you will have a successful track record of managing all phases of projects and will have overall responsibility for client satisfaction, quality control and financial performance. This is a great opportunity to join a highly creative, collaborative team where you will leverage your attention to detail and interpersonal skills to design and deliver exceptional projects on time and within budget. Grow your project management expertise while working on trendsetting design projects across a variety of practice areas and industries.

Responsibilities

• Act as liaison between Internal PMs & vendors on all project matters, including managing project deliverables which includes making presentations, liaison with various internal stakeholders.
• Direct involvement in all procurement matters from start to end, including calling of tenders to contract approvals.
• Develops project plans and coordinates cross-functional teams through meetings and progress measurement activity which bring distinct, specific projects to completion both on time and within budget
• Manage relationships with internal and external stakeholders
• Drives planning, design, estimating and internal project approvals. This will entail frequent collaboration with local and corporate leadership and internal partners such as IT, Security, Finance and Group Procurement
• Creates and manages detailed project budgets. This includes supervising budget re-allocations, change orders, commitments, expenditures, forecasts and analysis on a regular basis
• Leads regularly scheduled project meetings and documents assigned tasks
• Adheres to company space and design standards as well as embraces alternatives to improve efficiencies; update and maintain RE standards and guidelines
• Responsible for oversight and delivery of documents with design intent and top-notch technical quality
• Maintain and oversee the project manual and specifications
• Review detailed drawings and familiar with site construction methods.
• To conduct on-site observations and document site reviews, will be expected to be stationed on site during renovation projects.
• Process submittals/substitution requests during construction and address RFI

Requirements

• Minimum Bachelor’s Degree in Engineering, Building & Estate Management/Construction Management/Architecture and or Design.
• 4-6 years of relevant experience in Project Management
• Proficient in MS office (e.g. Excel and Powerpoint)
• Advanced technical understanding of architectural design, interior and furniture specification.
• Knowledge in sustainable design principles required.
• Capacity to drive sustainability focused discussions with clients and teams.
• Experience in managing project teams including both internal and external stakeholders with proven track record delivering workplace projects in large organisations
• Self-motivated team player with high energy levels and great interpersonal skills; possessing outstanding Communication and conflict resolution skills.
• Exceptional organisational and follow-up skills required plus ability to multi-task and bring issues to timely closure
• Attention to detail and ability to prioritise multiple projects and work with tight deadlines

Apply Now

We offer a competitive salary and benefits package and the professional advantages of a dynamic environment that supports your development and recognises your achievements.

• Position title: Quantity Surveyor
• Location: Anson Road, Anson Centre (Tanjong Pagar)
• Working Days: 5 days, Monday-Friday
• Working hours : 9 to 6 p.m
• Salary : $4,000-$5,000

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Key Responsibilities:

• Responsible for quantity take off and cost estimation.
• Preparation of tender submission with specific deadline.
• Source, planning, negotiate and award of contract to vendors.
• Responsible for material order processing and cost control.
• Evaluate and process vendor claims.
• Prepare monthly progress claims for submission to consultants in timely manner.
• Finalize project accounts with clients and vendors.

Requirements:

• Min. Diploma in related field of studies.
• At least 5 years of Quantity Surveying experiences, preferably in Interior Design.
• Able to work under pressure and work under minimal supervision.
• Hands-on with Interior Design works will be high priority.

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• With minimum 8 years of relevant experience.tronic Engineering / Computer Science or equivalent..
• With minimum 8 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms.
• Strong communication skills, problem solving and analytical skills.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Goldsmith

Location: Farrer Park

Working Days: 6 days a week (Must be able to work on weekends)

Working hours : 11am to 9pm

Salary : $3,500

Key Responsibilities:

1. Designing Jewelry and Objects:Create custom designs for jewelry (rings, necklaces, bracelets, etc.) based on customer requests or original ideas.
   Sketch or use computer-aided design (CAD) software to create detailed blueprints of the final product.
   
2. Metalworking:Melt and alloy gold and other metals to achieve the desired color, strength, and consistency for specific pieces.
   Shape and mold the metal using various techniques such as casting, forging, and soldering.
   
3. Casting and Shaping:Pour molten gold into molds to create base shapes for jewelry, and refine or finish pieces through techniques like hammering, rolling, or polishing.
   Use tools such as files, pliers, and hammers to shape metal and add intricate details to the designs.
   
4. Stone Setting:Set precious or semi-precious stones (diamonds, sapphires, etc.) into the metal using various setting techniques such as prong, bezel, or pave settings.
   
5. Finishing and Polishing:Smooth rough edges and surfaces to achieve a high-quality finish.
   Polish pieces using specialized tools to enhance shine and detail.
   
6. Repairing and Restoring Jewelry:Repair damaged jewelry by re-soldering, re-setting stones, or replacing broken parts.
   Restore old or antique pieces to their original form, while maintaining or enhancing their integrity.
   
7. Quality Control:Inspect finished pieces to ensure they meet design specifications, quality standards, and durability.
   Ensure that the weight, size, and quality of metals and gemstones are as required by the customer or company.
   
8. Customer Interaction:Consult with clients to understand their preferences, budget, and desired outcomes.
   Make adjustments to designs based on feedback or specific requests.
   

Interested personnel kindly contact WhatsApp: https://wa.me/6592994753 (Marcus)

Tan Meng Liang Reg No: R23115923

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday to Friday 8.30am to 6pm.
• Salary range: S$ 3,500 - 4,200

Job Responsibilities:

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/ BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).
• Any other ad-hoc duties as assigned.

Requirements:

• Diploma or Bachelor’s Degree in Electrical Engineering.
• Hands on experience with vessel mechanical and engine systems.
• Experience with engineering design software.
• Familiarity with maritime HM&E systems and naval construction processes.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683