• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• Planning of shop drawings submission schedule to control the sequence and time frame for development of shop drawings.
• Prepare documents/samples submission schedule to control the sequence and timing for samples submission/approval with preferable float time allowed for procurements.
• Co-ordinate all related design matters with Consultants/ Client.
• Ensure main contract and sub-contract designs co-ordinated fulfil all design requirements.
• Co-ordinate with Contract team for any formal and informal changes made by Consultants.
• Co-ordinate with Contract team for proper sequence of sub-contract awards.
• Resolve technical problems for team.

Interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified.Design / Technical Manager

Job Description (Key Responsibilities):

• To ensure an efficient Civil & Structural and Geotechnical & Tunnel design is achieved in accordance with Design Criteria and relevant standards
• To liaise with internal and external parties on all Civil & Structural and Geotechnical & Tunnel design matters and advises the NSC’s PRPM/SPM/PM regularly
• To liaise with internal and external parties on all Civil & Structural and Geotechnical design matters and advises the NSC’s PRPM/SPM/PM regularly
• To co-ordinate the review of Contractor’s Civil & Structural and Geotechnical & Tunnel submissions and assists the NSC’s SPM/PM in conveying a timely response to the Contractor
• To co-ordinate the review of Contractor’s Civil & Structural and Geotechnical submissions and assists the NSC’s SPM/PM in conveying a timely response to the Contractor
• To identify and resolve potential design related issues during construction phase
• To carry out any other duties as required by the Authority’s Project Management Team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical support as required in the evaluations of Contractor’s claims
• To ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Job Requirements & Person Specification (Qualifications, Experience, Skills & Behaviours)

• Degree in Civil & Structural (C&S) Engineering / Construction Management (Preferable from government university in Malaysia for Malaysia candidate)
• Relevant experience in a C&S, geotechnical, tunnel, or viaduct project / construction environment
• Proficiency in relevant software programmes for planning and project work is advantageous
• Experience with C&S, geotechnical, tunnel, or viaduct design would be an advantage
• Strong analytical and communication skills
• Any offer of employment for the role of Project Engineer is also subject to approval from our client for you to commence work on their project

About Asia Infrastructure Solutions:

Asia Infrastructure Solutions is a leader in delivering project & programme management, cost management, sustainable design, engineering, business advisory and consultancy solutions for the infrastructure, buildings, and environmental sectors. The company was established by Global Infrastructure Solutions Inc. (GISI), the largest privately owned construction manager in the commercial building, industrial and healthcare markets, and a leading project / construction manager in the environmental and public infrastructure sectors. GISI and its founding members have over 90 years of project experience in Asia and currently employs 12,500 employees globally, operating in more than 90 countries.

Asia Infrastructure Solutions has a strong and diversified team of project managers, construction managers, programme managers, cost managers, sustainability consultants and various disciplines of engineering professionals with a long track record in the infrastructure, building and environmental sectors delivering the future for the built and natural environment. Our professional and technical expertise and capabilities are inherited from the Arcadis Design & Engineering / Hyder / Freeman Fox in Hong Kong and Arcadis Consulting / EC Harris / Davis Langdon & Seah businesses in Singapore which span many decades in the Asia region.

Notable projects in Singapore include the Jewel at Changi, CapitaSpring, the North-South Corridor, various hotels, data centers and corporate headquarters for the world’s leading MNCs to name a few.

We empower our employees to succeed and we invest in their professional growth through learning & development programmes as well as membership of professional bodies. Our employees also receive a range of benefits that includes opportunities for hybrid/flexible working, a share-ownership scheme, and private healthcare coverage.

Asia Infrastructure Solutions . Delivering the Future . AsiaInfraSolutions.com

Fair recruitment practices:

Asia Infrastructure Solutions adheres to the Tripartite Standards for Recruitment Practices in Singapore and uses fair, merit-based, and inclusive hiring practices.

Employment agencies:

Candidates referred by employment agencies will not be considered unless the agency has been explicitly instructed to provide candidates for the stated role.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Title: Site Supervisor

Location: Singapore

Salary Range: $3000 - $3500 (based on experience)

Job Overview:

By Design is looking for a committed and skilled Site Supervisor to manage renovation projects, ensuring smooth execution, safety, and high-quality standards across all job sites. The successful candidate will act as the key link between the interior design team, contractors, and clients.

Responsibilities:

- Conduct daily site inspections to ensure safe work practices and proper job execution.

- Manage project documentation, schedules, timelines, and budgets.

- Communicate effectively with the design team, contractors (Mandarin-speaking), and clients.

- Handle incident investigations and recommend solutions.

- Assist with ad hoc assignments as needed.

Skills & Requirements:

- Preferred to have own vehicle for site visits.

- Proven experience in interior renovation and site supervision.

- Strong organizational and time management skills.

- Fluent in English and Mandarin to liaise with Mandarin-speaking contractors.

- No specific educational background required; experience is prioritized.

Job Scope:

• Design, develop and propose suitable machine vision system based on
  project requirements
• Initiative and proactively communicate well with customers, project
  managers and cross-department project team
• Perform software programming, UI design, and software performance
  optimization on the vision platform
• Numerous data analysis skills, but not limited to Minitab, Excel and SQL
• Travelled to customer’s site to perform setup, training, and support machine buyoff

Job Requirements

• Min Diploma in Electrical/Mechanical/Mechatronics/Electronics/Automation Control Engineer
• Experience from a company that is doing the customised Machine Design

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches using UVM/SystemVerilog for Pre-Silion IP or SOCs
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with min 1 year of experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience with designing with FPGA using Vivado is a plus

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655
EA Reg No: R1109557 Rose

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches using UVM/SystemVerilog for Pre-Silion IP or SOCs
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with min 1 year of experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience with designing with FPGA using Vivado is a plus

Job Description

• Industry/ Organization Type: Type: Automotive, Heavy Machinery and Aerospace Solutions
• Position Title: Design Engineer (Aero Engine Component Repair Design & Repair Development)
• Working Location: Shenton Way
• Working Hours: Monday – Friday, 9am – 6pm
• Salary Package: Up to $8,500
• Duration: Permanent

Key Responsibilities

• Lead the development of repair processes for Rolls-Royce Trent Engine Components.
• Spearhead and support the creation and development of necessary tooling and inspection requirements, including manufacturing routers and process instructions (e.g., data cards, recording forms, setup plans).
• Demonstrate First Article Inspection for assigned repair schemes according to AS9102, AS 130000, and Rolls-Royce SARRe Guidelines.
• Collaborate closely with Manufacturing Engineers and Customer Team Specialists to meet monthly repair development targets.
• Support Manufacturing Engineers in addressing technical and operational challenges related to Rolls-Royce, ensuring thorough follow-through until approval and shop operation handover.
• Assist in the preparation of Source Approval Validation packages and other necessary documentation for the industrialization and approval of Rolls-Royce-controlled repair schemes.
• Facilitate effective interactions with Engineering, Operations, Quality, Suppliers, and other support teams during repair industrialization, ensuring alignment with Safety, Quality, Delivery, and Productivity goals.
• Communicate effectively with vendors and internal functions to ensure timely and budget-compliant execution of repair development actions.
• Ensure all engineering designs and technical data are accurately documented, providing a strong technical/historical foundation for future reference and meeting customer/end-user needs.

APPLY NOW!!!

• Bachelor’s degree in Mechanical, Aeronautical, Material, or a related Engineering discipline.
• Minimum of 5 years in repair development or repair design
• Thorough understanding of Rolls-Royce repair schemes, engine manuals, special process manuals, and overhaul procedures.
• Proficient in Rolls-Royce component repair processes
• Knowledgeable in manufacturing and inspection tools and processes such as heat treating, thermal spraying, bead and shot peening, arc welding, wide gap brazing, and machining.
• Expertise in GD&T and tool/fixture design applications within repair settings.
• Specialized knowledge in the repair of Nozzle Guide Vanes and Stator Vanes would be advantageous.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70613 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples,
• mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement
• management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without
• deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such
• as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of
• works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and
• implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to
• achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 6 years of local working experience OR
• Diploma in Architecture with minimum 8 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

Job Scope :

- 2D drafting and other documentation.

- Assists Senior Engineer on the following :

• Technical assignments involving basic or applied research or the design and development of hardware products that includes CIP, upgrades, End Of Life (EOL).
• Includes design and evaluation of mechanical and/or electromechanical devices, components or systems.
• Develop, test and document designs for the transport mechanisms, vacuum systems and various process stations, including deposition chambers, substrate heating, cooling, cleaning, etc.

- Participate in the overall detailed product design.

- Participate in design review by providing mechanical design inputs relating to DFM and DFA, etc.

- Prepare and release 3D Solid Models and Engineering drawing while communicating to local vendors to expedite delivery of design parts and assemblies.

- Performs other related duties as assigned..

Requirements:

- Nitec / Diploma in Engineering or equivalent

- 2 – 3 years of relevant experience

- Proficient user of Solidworks

- Knowledge of Orcad

- Experience in Machine Design and familiarity in Design Processes

- Knowledge of ECO release of Engineering quality documentation

- Experience in dynamic electro-mechanical system design and high vacuum design will be an advantage

We are looking for a creative, resourceful Mechanical Design Engineer to join us. The Mechanical Design Engineer is responsible for conceptual / detailed design and will have the opportunity to participate in prototyping, installation, testing and verification of their design. This role requires good technical writing skills to produce documentation for submission to Customers and Clients. The Mechanical Design Engineer will work with a multi-disciplinary team and exposed to interactions with customers, partners, vendors, and sub-contractors.

Job Requirement:

• Master/Bachelor Degree or Diploma in Mechanical/Mechatronic Engineering
• Well-versed with Solidworks and AutoCAD
• Well-versed with Microsoft Word and Excel
• Able to travel overseas when required
• Minimum 2 years of mechanical design or product development experience
• Good technical writing skill
• Basic knowledge of GD&T and manufacturing processes

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples,
• mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement
• management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without
• deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such
• as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of
• works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and
• implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to
• achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 4 years of local working experience OR
• Diploma in Architecture with minimum 5 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

Physical Design Engineer

Experience : 5+ Years

Salary Range :SGD 7000-10000

Skills & Technical Expertise Required:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

Worked on multiple tapeouts on Netlist to GDSII

Hierarchical partitioning and budgeting of block-level subsystems.

Implementation of high performance (HP) cores, low power designs

Node experience upto 3nm,7nm, 10nm, 14nm, 28nm.

Timing Signoff in loop through STA and ECO cycle at block and at interface.

Block level floor planning, power planning and IR drop analysis.

Scan chain reordering / Scan Chain repartitioning

CTS expertise and clock tree constraints creation for meeting specifications

MMMC optimization at Block and Sub-System Level

Timing closure with Crosstalk and AOCV / POCV

TCL scripting to fundamentally understand tool usage.

Mandatory EDA Skills

PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

Job Scope :

- Assume responsibility for technical assignments involving basic or applied research or the design and development of Electrical hardware products. Includes design, fabrication, modification and evaluation of electromechanical devices, components or systems.

- Devise initial concept of assigned device, component or system and participate in the overall detailed Electrical perspective of product design.

- Creates original hardware, circuits, components, software, processes, and models to prove the feasibility of the design approach being investigated. Inclusive of Electronics and PCBA

- Participate in design review by providing inputs relating to DFM and DFA, etc.

- Prepare and release Engineering drawings/schematics while communicating to local vendors to expedite delivery of design parts and assemblies.

- ECO release of engineering documentation.

- Design of AC/DC power distribution systems including selection of circuit breakers, power supplies, contactors and cabling harnesses. Knowledge of PCBA Design, component selection and trouble shooting.

- Develop, test and document designs

- Develops estimates for products and projects. Power consumption, weight, size and schedule.

- Coordinates with manufacturing during pilot run and first production runs to ensure efficient transition from engineering into production.

- Interface effectively with customer to understand technical requirements and propose quality solutions.

- Possesses good electrical troubleshooting skills, and is able to troubleshoot at customer sites.

- Interfaces effectively with other organization such as Purchasing, Marketing, Service, and Quality Assurance as needed to carry out responsibilities

- Assists engineering management in developing schedules and specifications for new and legacy products.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Directs engineering and technical support personnel as required.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Performs other related duties as assigned.

Requirements:

- Degree / Masters in Engineering or requivalent

- 3 – 5 years of relevant experience

- Must possess relevant experience in Semicon Equipment Build

- Good working knowledge of electrical systems including motion, temperature measurement, PID loops, and safety interlock circuits.

- Experience working on dynamic electromechanical system design

- Proficient user of orcad, autocad, pcad, Solidworks or similar 3D CAD Software

- Design knowledge on NFPA, Semi Safety Requirements, and Machine safety.

- Good communication and interpersonal skills.

- Good command of written and verbal English

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Position title : Goldsmith

Location: Farrer Park

Working Days: 6 days a week (Must be able to work on weekends)

Working hours : 11am to 9pm

Salary : $3,500

Key Responsibilities:

1. Designing Jewelry and Objects:Create custom designs for jewelry (rings, necklaces, bracelets, etc.) based on customer requests or original ideas.
   Sketch or use computer-aided design (CAD) software to create detailed blueprints of the final product.
   
2. Metalworking:Melt and alloy gold and other metals to achieve the desired color, strength, and consistency for specific pieces.
   Shape and mold the metal using various techniques such as casting, forging, and soldering.
   
3. Casting and Shaping:Pour molten gold into molds to create base shapes for jewelry, and refine or finish pieces through techniques like hammering, rolling, or polishing.
   Use tools such as files, pliers, and hammers to shape metal and add intricate details to the designs.
   
4. Stone Setting:Set precious or semi-precious stones (diamonds, sapphires, etc.) into the metal using various setting techniques such as prong, bezel, or pave settings.
   
5. Finishing and Polishing:Smooth rough edges and surfaces to achieve a high-quality finish.
   Polish pieces using specialized tools to enhance shine and detail.
   
6. Repairing and Restoring Jewelry:Repair damaged jewelry by re-soldering, re-setting stones, or replacing broken parts.
   Restore old or antique pieces to their original form, while maintaining or enhancing their integrity.
   
7. Quality Control:Inspect finished pieces to ensure they meet design specifications, quality standards, and durability.
   Ensure that the weight, size, and quality of metals and gemstones are as required by the customer or company.
   
8. Customer Interaction:Consult with clients to understand their preferences, budget, and desired outcomes.
   Make adjustments to designs based on feedback or specific requests.