• To lead the process and mechanical design of the assigned project related to Industrial water and wastewater treatment plant design.
• Ensure the timely submissions / approvals of the designs and best quality work for utmost client satisfaction. Also ensure the designs are optimized for the cost and timely completion.
• Ability to work independently and in an interdisciplinary team environment to perform all duties in a professional and timely manner.
• Coordinate with the supporting team (Process/ Mechanical / Piping / E&IC) to ensure all engineering documents and deliverables are prepared accurately and within the desired schedule.
• Work closely with Gradiant Proposal/ NPI (R&D) to understand Gradiant's suite of proprietary technologies and transition to commercial applications.
• Work with NPI to understand project specific Heat & Mass Balance and translate to create system PFD's
• Prepare and review the project documentation including PFD, P&ID, General Arrangement, Equipment - Calculations/ Datasheets / Specifications, BOO, BOM, RFQ packages, GA & Manufacturing drawings, Operation & Maintenance Manuals.
• Size and selection of system components including but not limited to Pressure vessels, Heat Exchangers, Tanks, pumps, blowers, piping, valves and instrumentations.
• Ensure process and equipment designs as per the membrane, resin, and equipment supplier's guidelines to ensure the process guarantee meets the contract commitment.
• Be able to identify and provide necessary solutions for the technical issues related to process design and engineering in the field of water and wastewater treatment plant design.
• Be able to work through problems from a technical and practical prospective, while maintaining cost controls.
• Work with outside vendors and purchasing to select and establish equipment component specifications, material take-offs, requisitions and vendor orders while coordinating cost control, project schedule and manufacturing efforts.
• Have good organizational and communication skills
• Support Gradiant Subsidiaries across the globe as required.
• Support Proposal, NPI, Project & Operation (Site installation/ Commissioning/O&M) as required.

An established Company in Tuas specializing in Pumps & Pumping System seeks

suitable candidate for the following position:

SALES ENGINEER

Position Objective:

Manages Singapore sales market with list of pumps & ancillary products to local customers in the Petrochemical, Chemical, Power Generation, Waste and Water Treatment and General Industries.

Responsibilities:

- Continue building rapport with existing clients

- Develop new customer base for allocated industries and develop new markets

- Develop marketing plan and strategies to achieve sales budget

- Ensures sales strategies existing products or services, aligned with product roadmaps.

- Work closely with the team to provide product strategies and roadmaps to meet customer requirements.

- Monitor and evaluate the activities and products of the competition.

Requirements

- Degree in Engineering / Technical Diploma

- Preferably 2 years of experience in equipment Sales (Fresh Grade are welcome if you have the zeal for sales position)

- Familiar with industries like Oil & Gas, Petrochemicals, Chemicals, Pharmaceuticals will be an advantage.

- Possess own car

- Strong trouble shooting skills

- Strong commercial skills including: selling process, and sales strategies

- Able to work independently and self-motivated

Duties & Responsibilities:

• Carry out structural design and produce professional engineering calculation complying to Eurocodes and prevailing building control regulations
• Attending technical meetings with authorities, developer and contractors
• Prepare technical engineering report and draft for shop draawing
• Check shop drawing complying to design intent
• Assists Senior Engineers in day to day activity on the projects
• Other duties related to steel structure site erection

Requirements:

• Knowledge of Structural design software TSD, Prokon, and etc
• Good internal and external networking
• Bachelor Degree in Engineering (Civil and Structure)
• At least 3 years' local experience, ideally in structural steel design
• Able to do independent structural steel work design
• 5 years experience

Overview:

The site engineer is responsible for overseeing construction projects, ensuring they are completed safely, within budget, and according to specifications. They act as a liaison between different project stakeholders, supervise construction activities, and ensure compliance with regulations and quality standards.

Responsibilities:

1. Project Management: Manage and coordinate construction projects from planning to completion, ensuring adherence to schedules, budgets, and quality standards.
2. Site Supervision: Oversee daily on-site activities, including monitoring progress, resolving issues, and ensuring compliance with safety regulations.
3. Technical Expertise: Interpret architectural and engineering drawings, providing technical guidance to construction teams and subcontractors.
4. Quality Assurance: Implement quality control measures to ensure workmanship and materials meet project specifications and standards.
5. Resource Management: Manage resources efficiently, including labor, materials, and equipment, to optimize project timelines and costs.
6. Client Communication: Maintain regular communication with clients, consultants, and stakeholders to address concerns, provide updates, and ensure project alignment with expectations.
7. Problem Solving: Identify and resolve technical issues, conflicts, and challenges that arise during the construction process.
8. Documentation: Maintain accurate project documentation, including daily reports, progress updates, and change orders.
9. Health and Safety Compliance: Enforce strict adherence to health and safety regulations on-site, ensuring a safe working environment for all workers.

Skills and Qualifications:

• Educational Background: Bachelor’s degree in Civil Engineering or related field. Professional certification (PE license) is advantageous.
• Experience: Proven experience in construction and site management, preferably in a supervisory role.
• Technical Skills: Proficiency in reading engineering drawings, understanding construction methodologies, and using relevant software (AutoCAD, MS Project, etc.).
• Project Management: Strong project management skills with the ability to manage multiple tasks and stakeholders simultaneously.
• Communication: Excellent communication and interpersonal skills to liaise with diverse stakeholders effectively.
• Problem-Solving: Ability to analyze problems, propose effective solutions, and make decisions under pressure.
• Leadership: Strong leadership and team management abilities to motivate and guide construction teams.
• Attention to Detail: Meticulous attention to detail to ensure compliance with specifications and quality standards.
• Adaptability: Flexibility to adapt to changing project requirements and environments.

Responsibilities

• Responsible for providing technical support for production process
• Establish work procedures, corrective action and preventions
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime
• Perform process improvement and defects analysis
• To liaise with customers for product quality discussion
• Other ad-hoc relating duties as assigned from time to time

Requirements

• Degree in Materials Science and Engineering or related Engineering discipline
• Knowledge in sputtering coating technology
• Strong analytical skills with excellent problem-solving skills
• Good working attitude and willing to learn
• Candidates with lesser experience could be considered for an Assistant Engineer role

Shift Type / Work Hours

Normal Shift (5 days work week)

7.50am to 4.55pm

Benefits

1. Company transport provided at designated pick-up points island-wide
2. Medical insurance and dental coverage
3. In-house canteen at subsidized prices

Please visit our corporate website for more information on Seiko Epson Corporation.

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. The position is for one year, renewable subject to satisfactory performance. Successful candidates will be involved in a project that is related to 3D Character Modeling.

Key Responsibilities:

• Responsible for modeling and texturing proprietary IP characters, creating character models with a thorough understanding of human anatomy and material properties
• Design and texture character clothing models independently

Job Requirements:

• Master’s degree or above in relevant disciplines
• Ability to hand-paint textures
• Strong foundation in art and sculpting, with a scientific and systematic grasp of human anatomy
• Demonstrate expertise in UV mapping and texturing
• Skilled in the use of tools such as Maya, ZBrush, Photoshop, and Substance Painter for model creation and texture design

We regret that only shortlisted candidates will be notified.

• Designing, developing and enhancing electro-mechanical systems and mechatronic devices.
• Creating automated systems and the software to control them.
• Conducting research, documenting findings, and presenting reports at meetings.
• Developing design documents for mechanical parts and final products.
• Identifying areas of weakness in the Equipment and making recommendations for improvement.
• Understanding problems or client briefs and developing solutions that satisfy them.
• Selecting the required tools and materials for the process.
• Assisting with recruitment, onboarding, and training of junior Engineers or Apprentices.
• Attending workshops, training sessions, and conferences to network with others and stay on top of field advancements.
• willing to do night shift
• any service requirement from the site must go and attend any time

Meet Ship Superintend at ongoing vessel at Anchorage or PSA, inspect

refrigeration, accommodation air-conditioner systems, package type air-

conditioner, split type air-conditioners.

Repair the equipment as per customer’s requirement or services or retrofit,upgrade the entire system.

Supply brand new refrigeration and air-conditioning compressor or re-

conditioned compressors as per buyer requirement.

Supply, install package type air-conditioners, split type air-conditioners.

Supply refrigeration & accommodation air-conditioner compressor parts,

lubrication oil and refrigerant.

Responsibilities:

• Acts as a project lead by establishing development plans and preparing for design reviews.
• Guides others on engineering tools, test specifications and assesses application of Health, Safety, and Environment techniques during the design process.
• Applies and interprets engineering calculations to obtain design solutions and troubleshoot erroneous results. Defines input requirements and develops functional specifications by utilizing basic statistical methods and reliability techniques.
• Contributes to Halliburton’s Intellectual Property portfolio by delivering innovative and commercially successful solutions. Creates an impactful relationship with Halliburton’s technical community, customers, and vendors by proactively collaborating with key stakeholders.
• Participates in professional societies in area of specialization.

Requirements:

• Skills acquired through the completion of a degree in Mechanical Engineering or similar discipline.
• Minimum educational requirement of a doctoral degree and zero years’ experience or a master’s degree and two or more years’ related experience or a bachelor’s degree and four or more years’ related experience.

Responsibilities:

You will be responsible for understanding project requirements, ensuring smooth execution of project, coordination of site work with contractors and customers to ensure timely completion of project within budgeted cost and timelines. You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

Job Description

• Understanding and implementing the company's HSE policies, project-specific HSE requirements, and procedures.
• Inspecting work areas and practices to identify and correct unsafe conditions and practices.
• Reporting and intervening when observing unsafe working conditions or practices.
• Promptly reporting any reportable incidents to the Project HSSE Manager and related stakeholders.
• Monitoring and improving the condition of subcontractor machinery and equipment.
• Enhancing safety awareness through safety training, drills, and courses.
• Leading incident investigations, root cause analysis, and recommending solutions.
• Ensuring closure of outstanding findings and non-conformance issues.
• Focusing on continuous improvement and innovation.
• Achieving and reporting project Key Performance Indicators (KPIs).
• Promoting safety and health awareness among employees and project personnel.
• Establishing and maintaining emergency response plans.
• Compiling safety and health records and reports for the company sites.
• Organizing HSE campaigns and audit programs.
• Conducting surveillance audits.
• Assessing the relevance of technologies for HSE.
• Handling ad-hoc tasks as assigned by Management.

Job Requirements

• Minimum diploma or higher qualification.
• Workplace Health and Safety Officer (WHSO) certification through the Ministry of Manpower or equivalent.
• Knowledge of ISO 45001, with preference for internal auditor certification.
• Experience in shipyard operations, particularly with major oil and gas clients.
• Strong competencies in results orientation, adaptability, effective intelligence, leadership, and teamwork.

Possess a diploma/ degree in Electrical/ Electronics/ Engineering or equivalent.

Fresh or soon to graduate applicants are also welcomed.

Experience in Microsoft Visual Studio.

Competent in C#, C, C++, Visual Basic.

Knowledge in compiling/gerating EXE file.

Prepare detailed electrical drawings and engineering documentation.

Work closely with customers on their requirements and be part of the software development life cycle (SDLC).

Review and enhance software features and updates.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Mechanical) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): costing, quotations, RFI, Engineering, negotiation, claims, procurement, liaison with clients, liaison with contractors, field engineering
• Preferably Junior Executive specialized in Engineering - Oil/Gas or equivalent. The individual would be required to do site-visit and prepare project costing.
• Regular and timely follow-up with clients to support Request-for-Tenders.
• To smoothly manage a response to 'Request for Tenders' (RFT) or 'Request for Proposals' (RFP) issued by existing or prospective clients.
• This is a key role in the organization. You would require to coordinate with other departments to consolidate the tender submission.
• The parties will include our sub-contractors or joint partners. You are to warrant completeness in submission and put forward the best possible response which will demonstrate value-creation in our tender.
• You will need to assure all deadlines are met as well as manage the graphic design and visual presentation of both hard copy and digital version.
• Close follow-up and strong customer service attitude to handle commercial negotiation

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

The School of Mechanical & Aerospace Engineering (MAE) invites applications for the position of Research Engineer I/Research Engineer II.

The Research Engineer will carry out research project for industrial robot controller and applications with open source environment ROS2

Key Responsibilities:

• Responsible for developing ROS2 controller application & AI software for industrial requirements.
• Responsible for promotion to and coordination with industry partners both locally and internationally
• Assisting the team for robot system integration with ROS2 controller

Job Requirements:

• Bachelor/Master in Robotics from Mechanical Engineering / Electrical Engineering / Computer Engineering
• Familiar with industrial manipulator modeling, control, or AI techniques for robotics
• Good hands-on experience on industrial robot programming
• Familiar with C/C++, ROS, Linux OS, Windows OS, and other similar libraries and software tools
• Good robot system integration experiences

We regret that only shortlisted candidates will be notified

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. The position is for one year, renewable subject to satisfactory performance. Successful candidates will be involved in a project that is related to 3D Environment Modelling.

Key Responsibilities:

• Create immersive 3D environments and VR
• Translate 2D designs into 3D spaces
• Optimize environments for performance and aesthetics
• Design and texture object models independently

Job Requirements:

• Bachelor’s degree or above in relevant disciplines
• Proficient in Unity, Unreal Engine, Blender, and Cinema 4D
• Strong portfolio with diverse environmental models with a robust understanding of complex scene spatial and proportional relationships
• Knowledge of procedural generation and optimization techniques
• Preferably to have experiences as the lighting specialist to achieve cohesive and compelling environments

We regret that only shortlisted candidates will be notified.

Responsibilities

- Perform repair, troubleshooting and commissioning of Caterpillar engines/

machines / equipment.

- Coordinate and communicate with customer.

- Develop strategies to improve quality of technical support, and to improve service.

- Review set up for technical support with principals

Requirements

- Diploma in Marine / Mechanical Engineering / Mechatronics

- 2-3 years working experience in the construction/marine or mechanical handling

equipment industry or 5 years experience with Industrial Technician Certificate

- Ability to organise and lead with plenty of drive and initiative

- Shipyard working experience / sea going experience will be an advantage.

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Responsibilities

· Responsible for providing preventive maintenance service for BMS (Building Management System)

· Carry out troubling shooting, analyzing and rectification of the system on time

· Support client with system operation and recommendation for improvement

· Data analyzing and determination of the system operation status

· Response client’s request and attend the issue in short notice

· Supervise subcontractor to carry out the work safely

· Provide the assistance to colleague and mentoring actively

· Ensure all works carried out in accordance with the specified quality and EHS standards

· Prepare and submit quotations, including material, labor, and scope of works

· Perform replacement/repair, fit out works/A&A for existing BMS site

· Perform weekly standby on rotation schedule

· Perform calibration and verification of BMS sensors annually

· Provide sales support BMS service and site survey

Requirements

· Diploma/ Degree from a recognized technical institute

· Hands on experience in BMS Control System

· Hands on experience in programming languages and logic gates

· Familiar with digital fundamental

· Knowledge on basic networking

· Strong customer management & problem solving skills

· Excellent communication & presentation skills

· Skilled in the use of MS office

· Knowledge on ACMV system

Meet Ship Superintend at ongoing vessel at Anchorage or PSA, inspect

refrigeration, accommodation air-conditioner systems, package type air-

conditioner, split type air-conditioners.

Repair the equipment as per customer’s requirement or services or retrofit,upgrade the entire system.

Supply brand new refrigeration and air-conditioning compressor or re-

conditioned compressors as per buyer requirement.

Supply, install package type air-conditioners, split type air-conditioners.

Supply refrigeration & accommodation air-conditioner compressor parts,

lubrication oil and refrigerant.

Responsibilities:

• Prepare Engineering Document (Technical Specification, Calculation, drawings, etc) inthe development of new designs and products.
• Generate new drawings and drawing changes including parts lists and Change Orders.
• Perform impact analysis on the arrangement and drawings.
• Plan and organise relevant design changes in cooperation with Ship Design Authority.
• Study/analyse/investigate/develop the design. Prepare technical documentation/guidelines for the work to be performed, according to established formats from the technicaldatabase, stipulated budget, time schedule and quality standards.
• Conduct Testing and validate technical interfaces for the work performed, according toestablished test procedures from the technical database.
• Liaise with ship-owners and Ship Design Authority to obtain approval on engineeringdeliverables.
• Manage the design schedule and ensure that design is carried out according to contractand regulations.

Requirements:

• At least a Bachelor’s Degree in Mechanical/Marine Engineering.
• At least 1-2 years experience in engineering design and/or Classifications Societies and/orNaval Engineering Officer.
• Strong knowledge of international design codes, Classification/Statutory Rules andRegulations.
• Keep abreast with Naval Classifications Rules, Military and Industrial Standards relevantto design activities.
• Engineering Design Project Management skills.
• Strong Leadership and Interpersonal skills.
• Software knowledge of AutoCAD
• Only Singapore Citizens will be considered for this position

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Description

Basic Qualifications:

• Bachelors/Degree in Computer Science or other technology field.
• Must have at least 3 years of professional production support experience in HA environment.
• Must be familiar with agile and DevSecOps principles and practices.
• Scripting experience with Windows PowerShell and Unix scripting.

·

Preferred Qualifications:

• 3+ years of experience with Java applications, SQL/NoSQL, Handling Production operations.
• Experience working with any log analysis tools and observability applications like Grafana, Tableau, Splunk.
• Experience with Linux and Windows administration, networking, security, and troubleshooting.
• Excellent communication, collaboration, and problem-solving skills
• Knowledge on Docker/Kubernetes, NginX, CDN, Caching
• Installing and Uninstalling various Windows and Unix/Linux applications and software experience

Mandatory Skills

Key Responsibilities

· Creating complex, enterprise-transforming applications on diverse, high energy teams

· Working with the latest tools and techniques

· Hands-on coding, usually in a pair programming environment

· Working in highly collaborative teams and building quality code

· The candidate must exhibit a good understanding of model implementation, data structures,

data manipulation, distributed processing, application development, and automation.

· The candidate must have a good understanding of consumer financial products,

data systems and data environments, and processes that are necessary for the

implementation of Risk and Finance models

Essential Skills & Prerequisites

· Degree in computer science or a numerate subject (e.g. engineering, sciences, or mathematics)

or Bachelor's/Master degree with 6 years of experience

· Hand-on Development experience with PySpark, Scala Spark and Distributed computing.

· Development and implementation experience of applications for 4-6 years.

· 4 to 6 years' experience designing and developing in Python.

· 4 to 6 years' experience in Hadoop Platform (Hive, HDFS and Spark)

· 3 to 5 years' experience with Unix shell scripting

· 3 to 5 years' experience with SQL

· 2 to 3 years' experience with Spark programming.

· Knowledge of micro-services architecture and cloud will be added advantage.

· Knowledge of Java and Scala will be added advantage

Desired

· A Bachelor’s degree or higher preferably in Computer Science or IT

· Additional experience on developing service-based application

· Excellent analytical skills: Proficient in MS Office and able to produce board-level

documentation

· Fluency in written and spoken English; Good communication and interpersonal skills

· Self-starter who sets and meets challenging personal targets, Detailed person, with a big

picture outlook

· Understanding of current technologies employed by Tier 1 Investment Banking Institutions

· Must be a team player

Mandatory Skills

· Hand-on Development experience with PySpark, ScalaSpark and Distributed computing.

· Development and implementation experience of applications for 4-6 years.

· 4 to 6 years' experience designing and developing in Python.

· 4 to 6 years' experience in Hadoop Platform (Hive, HDFS and Spark)

· 3 to 5 years' experience with Unix shell scripting

· 3 to 5 years' experience with SQL

· 2 to 3 years' experience with Spark programming

Mandatory Skills

Key Responsibilities

· Creating complex, enterprise-transforming applications on diverse, high energy teams

· Working with the latest tools and techniques

· Hands-on coding, usually in a pair programming environment

· Working in highly collaborative teams and building quality code

· The candidate must exhibit a good understanding of model implementation, data structures,

data manipulation, distributed processing, application development, and automation.

· The candidate must have a good understanding of consumer financial products,

data systems and data environments, and processes that are necessary for the

implementation of Risk and Finance models

Essential Skills & Prerequisites

· Degree in computer science or a numerate subject (e.g. engineering, sciences, or mathematics)

or Bachelor's/Master degree with 6 years of experience

· Hand-on Development experience with PySpark, Scala Spark and Distributed computing.

· Development and implementation experience of applications for 4-6 years.

· 4 to 6 years' experience designing and developing in Python.

· 4 to 6 years' experience in Hadoop Platform (Hive, HDFS and Spark)

· 3 to 5 years' experience with Unix shell scripting

· 3 to 5 years' experience with SQL

· 2 to 3 years' experience with Spark programming.

· Knowledge of micro-services architecture and cloud will be added advantage.

· Knowledge of Java and Scala will be added advantage

Desired

· A Bachelor’s degree or higher preferably in Computer Science or IT

· Additional experience on developing service-based application

· Excellent analytical skills: Proficient in MS Office and able to produce board-level

documentation

· Fluency in written and spoken English; Good communication and interpersonal skills

· Self-starter who sets and meets challenging personal targets, Detailed person, with a big

picture outlook

· Understanding of current technologies employed by Tier 1 Investment Banking Institutions

· Must be a team player

Mandatory Skills

· Hand-on Development experience with PySpark, ScalaSpark and Distributed computing.

· Development and implementation experience of applications for 4-6 years.

· 4 to 6 years' experience designing and developing in Python.

· 4 to 6 years' experience in Hadoop Platform (Hive, HDFS and Spark)

· 3 to 5 years' experience with Unix shell scripting

· 3 to 5 years' experience with SQL

· 2 to 3 years' experience with Spark programming

Responsibilities:

· Responsible for day to day project supervision for new construction/conversion/repairs of vessels

· Ensure work assigned is carried out effectively and productively in order to meet customer specifications and requirements

· Deploy effective utilization of manpower and material resources in the department.

· Liaising with other departments on daily production schedule

· Assist in Planning of department manpower projections

· Assess and plan weekly manpower deployment and allocation of repair vessel to Sub-contractor

· Obtain and monitor drawings/ technical information

· Attend assigned project progress meeting/HAT meeting

· Assess staff work performance under his charge as required

· Identify training needs for his men

· Monitor job progress and man hours of the assigned project

· Study and evaluate the work processes and methods of the department and explore new ideas to improve work quality and productivity

· Liaise with owners’ representative and/or class surveyor during witness/inspection

· Highlight areas of need to other trades to clear their work (e.g. temporary lightings, staging, closing of access, etc.)

· Conduct RA assessment/ BBS observation/ hazard reporting

Requirements:

· Degree/Diploma in Electrical Engineering

· 2 -3 years relevant experience in Electrical operations in marine industry

· Knowledge of class requirements will be advantageous

· Knowledge of ship’s electrical system, control system and their classification requirements

· Able to interpret technical/electrical drawings and specification

· Possess man-management experience for workers and subcontractors

· Able to work on weekends and public holidays due to project’s requirements

· Able to work under outdoor conditions, including grease and dust

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm