☑ Basic $ 2800 - $3300 + Transport Allowances $350 - 1000 ( Own Transport ) + OT Pay + Standby Allow + AWS + Min 1.5 mth Variable Bonus

☑ 5 Days, Flexi Hours - Required to standby once a month.

☑ Location: Island-wide (Parking & ERP Fully Claimable)

☑ MNC - Medical Device & Equipment Manufacturer

☑ Good Benefits & Career Prospect

Job Responsibilities:

• Install, maintain and troubleshoot medical angiography systems equipment at customer sites.
• Perform routine inspections and CM/PM maintenance to ensure equipment reliability.
• Collaborate with engineering teams to relay customer feedback and contribute to product improvement.
• Deliver technical training to clients and internal staff.
• Maintain accurate documentation for FSN/FMI/FSCA reporting on assigned products.
• Develop a higher level of troubleshooting and analytical skills.

Job Requirement:

• Higher NITEC Diploma / Degree in Biomedical, EEE or Mechatronic Engineering.
• OR 1 - 3 years of strong hands-on field servicing skills in medical device are highly advantageous

Interested applicants are welcome to apply or email to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

The Optics team builds highly integrated component platforms with high speed Silicon photonics, transmit and receive amplifiers, controller ASIC’s with Marvell The Optics team at Marvell is dedicated to developing cutting-edge, highly integrated component platforms that leverage high-speed Silicon Photonics, advanced transmit and receive amplifiers, and custom controller ASICs featuring Marvell’s DSP technology. These sophisticated components are powered by robust embedded firmware, making them versatile and high-performing. Our team leads the entire lifecycle of these integrated optical systems, from design and rigorous verification to comprehensive validation. We conduct extensive system-level testing across various operating conditions to ensure optimal performance and reliability of the hardware, firmware, and control systems. This commitment to excellence drives Marvell’s leadership in high-speed optical technologies.

Job Responsibilities

• Be a key contributor to development of state-of-the-art silicon photonics light engine at Marvell.
• Responsible for all aspects of engineering design, process development, and productization for Marvell’s next-generation optics products, involved in a full product lifecycle and will carry new products from inception all the way to NPI.
• Implement creative design solutions to accelerate design and tape-out of photonics products.
• Collaborate closely with CAD and foundry process teams working on the development and support of next generation photonics design flow and design automation.
• Collaborate with cross-functional teams consisting of Digital and Analog Circuit designers, Signal/Power Integrity, and substrate layout, and system design team.

Requirements

• PhD in Electrical Engineering, Photonics or related discipline, or equivalently those with an M.S/M. Eng. with industrial experience in photonic integrated circuit design and validation will also be considered.
• A strong understanding of optical component design, fabrication and validation.
• Solid background in semiconductor optical devices such as modulators, detectors and other integrated waveguide devices.
• Use of industry standard optical and electrical modeling and simulation software to design electro-optical devices and generate GDS level mask data for device fabrication.
• Direct experience of optical components and integrated circuits characterization including optical coupling, DC and RF testing. Test automation in R&D environment.
• Familiarity or direct experience in the standard Si/CMOS/MEMS process technologies required for fabrication and integration of electrical and optical devices.
• Demonstrated ability to work collaboratively in a fast-paced, cross-functional team environment.
• Self-starter. Motivated to get things done.
• Willingness and ability to be hands on and work in the lab.
• Strong presentation and communication skills

☑ Basic $ 4500 - $ 6500

☑ MNC - High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm)

☑ East Region – A1 Builder

Job Description

• Develop and manage project schedules from design to commissioning.
• Estimate durations, resources, and prepare progress reports.
• Handle tender submissions, site planning, and progress monitoring.
• Manage EOT claims and oversee RI/TOP schedules and handovers.

Job Requirements:

• Diploma/Degree in Civil Engineering or related
• Min 3 years of experience in construction planning building-related facilities.
• Proficiency in MS Project Planner, Primavera, or Synchro.

Interested applicants are welcome to apply or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

☑ Basic $ 4500 - $ 6000

☑ MNC - High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm / 8.30am – 6pm )

☑ East Region – A1 Builder

Job Description

• Develop and manage project schedules from design to commissioning.
• Estimate durations, resources, and prepare progress reports.
• Handle tender submissions, site planning, and progress monitoring.
• Manage EOT claims and oversee RI/TOP schedules and handovers.

Job Requirements:

• Diploma/Degree in Civil Engineering or related
• Min 3 years of experience in construction planning building-related facilities.
• Proficiency in MS Project Planner, Primavera, or Synchro.

Interested applicants are welcome to apply or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

We are looking for a Staff Analog Layout Engineer to contribute to the development of High-Speed Connectivity, Broadband Analog and Computing/Storage-Memory Data-Transport products (including functional blocks such as high-speed digital, multi-GHz ADC/DAC, PLL/DLL serial and parallel I/O, and clock generation/distribution for custom ICs). The candidate must have a proven record of laying out high-performance analog circuits in state-of-the-art CMOS process technologies, successfully performed top-level integrations, and placed products into volume production multiple times.

Requirements

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and at least 5+ years of related professional experience.
• Master’s degree in Computer Science, Electrical Engineering or related fields with 3+ professional experience.
• Deep understanding of layout methodology from initial chip planning to tape-out.
• Deep understanding parasitic optimizing in layout
• Experiences in advanced process technology and Fin-FET is preferable.
• Have a high level of proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc. reports.
• Have a high-level proficiency/knowledge of Synopsys or CADENCE layout entry tools.
• Programming skills in any of the following are a plus: Skill or Ample or Perl, etc.
• Strong technical and analytical background, problem solving skills, etc.
• Fluent in English

Responsibilities:

• Design, develop, and optimize large-scale data pipelines for efficient data collection, processing, and storage.
• Monitor and maintain data pipelines to ensure high availability and consistency.
• Develop algorithms for processing and analyzing large datasets.
• Utilize distributed computing frameworks like Hadoop and Spark for scalable data processing.
• Design and manage large-scale data storage solutions, including HDFS, Cassandra, NoSQL, and BigQuery.
• Implement robust data management practices to ensure data integrity and security.
• Collaborate with data scientists, analysts, and stakeholders to meet data requirements.
• Communicate complex data concepts effectively to non-technical stakeholders.
• Stay updated on the latest trends and advancements in big data technologies.
• Continuously enhance data infrastructure to improve performance and scalability.

Requirements:

• Bachelor's degree or higher in Computer Science, Data Science, or a related field.
• Minimum of 2 years of relevant professional experience preferred.
• Proven experience in designing and maintaining data pipelines and storage solutions.
• Strong proficiency with distributed computing frameworks, particularly Spark.
• Expertise in data management systems like HDFS, Cassandra, NoSQL, or BigQuery.

Responsibilities:

• Design, develop, and optimize large-scale data pipelines for efficient data collection, processing, and storage.
• Monitor and maintain data pipelines to ensure high availability and consistency.
• Develop algorithms for processing and analyzing large datasets.
• Utilize distributed computing frameworks like Hadoop and Spark for scalable data processing.
• Design and manage large-scale data storage solutions, including HDFS, Cassandra, NoSQL, and BigQuery.
• Implement robust data management practices to ensure data integrity and security.
• Collaborate with data scientists, analysts, and stakeholders to meet data requirements.
• Communicate complex data concepts effectively to non-technical stakeholders.
• Stay updated on the latest trends and advancements in big data technologies.
• Continuously enhance data infrastructure to improve performance and scalability.

Requirements:

• Bachelor's degree or higher in Computer Science, Data Science, or a related field.
• Minimum of 2 years of relevant professional experience preferred.
• Proven experience in designing and maintaining data pipelines and storage solutions.
• Strong proficiency with distributed computing frameworks, particularly Spark.
• Expertise in data management systems like HDFS, Cassandra, NoSQL, or BigQuery.

Job Scope:

· To support customer's application

· The candidates will have to be responsible for the team, ensuring day to day operations run smoothly, critical projects/apps are prioritised, and escalations handled appropriately.

· The lead should also proactively promote service excellence by identifying strategies that can be adapted and scaled to drive operational efficiency across the team.

Requirements:

· Tertiary Education in a technology discipline, AWS Solution Architect Associate level certification.

· 5 year working experience in a similar setting would be preferred.

· Reasonable amount of AWS knowledge/experience is a must.

· Some troubleshooting flair.

· Relevant knowledge/experience on Jenkins/Bitbucket/Python is a bonus.

· These security tickets are triggered from various sources, such as AWSConfig , Cloudwatch and CSPM tools.

EA License No: 96C4864

Reg. No.: R24121728

We are looking for a detail-oriented and proactive Systems Engineer to join our team. In this role, you will be responsible for managing and enhancing our IT infrastructure and applications. You will handle operational tasks ranging from deployment to security management, ensuring that our systems are efficient, secure and reliable.

Responsibilities includes but are not limited to:

· Managing and executing operational tasks relating to IT infrastructure, systems and applications.

· Performing deployment activities, including software installation, configuration changes, and system updates/patches.

· Ensuring the security and stability of IT systems by applying patches, security updates, and conducting vulnerability assessments.

· Monitoring system performance, troubleshoot issues, and provide timely resolution to minimize downtime and maintain optimal system functionality.

· Collaborating with cross-functional teams to identify and implement process improvements and automation strategies.

· Maintaining documentation of system configurations, procedures, and troubleshooting steps.

Requirements:

· Bachelor degree in Computer Science, Information Technology, or a related field (or equivalent work experience).

· Proven experience in IT operations, systems administration, or a similar role.

· Strong knowledge of operating systems (e.g., Windows, Linux), network protocols, and server hardware.

· Understanding of security principles and best practices, including patch management and vulnerability assessment.

· Proficiency in scripting languages (e.g., PowerShell, Python, Bash) to automate tasks and streamline operations.

· Ability to assist with troubleshooting issues and propose resolutions.

· Good communication skills, with the ability to collaborate effectively with technical stakeholders.

· Strong attention to detail.

Responsibilities:

• Design, develop, and optimize large-scale data pipelines for efficient data collection, processing, and storage.
• Monitor and maintain data pipelines to ensure high availability and consistency.
• Develop algorithms for processing and analyzing large datasets.
• Utilize distributed computing frameworks like Hadoop and Spark for scalable data processing.
• Design and manage large-scale data storage solutions, including HDFS, Cassandra, NoSQL, and BigQuery.
• Implement robust data management practices to ensure data integrity and security.
• Collaborate with data scientists, analysts, and stakeholders to meet data requirements.
• Communicate complex data concepts effectively to non-technical stakeholders.
• Stay updated on the latest trends and advancements in big data technologies.
• Continuously enhance data infrastructure to improve performance and scalability.

Requirements:

• Bachelor's degree or higher in Computer Science, Data Science, or a related field.
• Minimum of 2 years of relevant professional experience preferred.
• Proven experience in designing and maintaining data pipelines and storage solutions.
• Strong proficiency with distributed computing frameworks, particularly Spark.
• Expertise in data management systems like HDFS, Cassandra, NoSQL, or BigQuery.

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Responsibilities :

1. Attend site visit
2. Complete system designs for PV projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of BOS location and interconnection details, and labelling
3. Prepare bill of materials
4. Provide ad-hoc solutioning for Business Development team
5. Assist Engineering Manager with method of statement, engineering drawings and solutions
6. Ability to work under pressure

Requirements :

1. Degree in Electrical and Electronic Engineering
2. Experience in designing PV solar system and has some site installation experience
3. Candidate without experience are welcome to apply, however must be willing to learn
4. Proficient in AutoCAD
5. Able to understand and interpret single line diagram

Primary Roles & Responsibilities

•  The patching cabling between network equipment and client’s network
•  The installation of power cables from equipment to power supply in rack/cabinet/closet
•  The installation, troubleshooting and de-installing IT equipment (Servers / Network / Storage / etc) Install/swap out devices (e.g., phone, computers, cables, boards, edge routers, switches and etc.)
•  Complete all hard and complex Move, Add Change (MAC) requests within the defined service levels
•  Act as interface between client’s associates and management
•  Provide hardware break-fix services for network infrastructure
•  Perform onsite call-through, data, voice, website and security testing
•  Perform back-up testing to ensure all systems are connected to the client’s network as directed
•  Support carrier testing of circuits
•  Assist with facilities efforts such as vendor co-ordination and vendor supervision - Power and uninterruptable
• power supply (UPS) restoral - Water problems, - Emergency cooling restoration, - Fire suppression exercises,
• restoration, and post fire events
•  Support inventory management activities - Receiving inventory, - Tagging of assets, - Tracking spares (crash
• kits), - Ordering inventory, - Updating inventory records, - Prepare and return damaged equipment
•  Act as an interface, as needed, between associates at the applicable location and centralized project / operations / MAC management

Requirements:

•  Must be proficient in utilizing technical tools such as BERT testers, cable testers, and fiber testers.
•  Requires experience in working in communications closets
•  Must be able to perform rack and stack activities
•  Must be able to safely lift heavy objects
•  Must understand cable patching processes and procedures in copper and fiber
•  Experience in either or both CommScope and Corning structured cables (copper and fiber)
•  Must have a basic knowledge of data communications networking.
•  Must be able to assist in troubleshooting issues
•  Must understand network terminology
•  Requires good interpersonal communications skills
•  Must be able to explain technical issues in a way the client will understand an issue
•  Must be able to interpret a client’s issue in a way that will allow technician to facilitate a resolution

Education/Experience Requirements :

•  5+ years of experience in Data Centre operations and environment
•  Must have a basic knowledge of local and wide area networking.
•  High school Diploma or equivalent required

☑ Basic $ 4500 - $ 5000 Days (Mon – Fri: 08:30am – 5.30pm)

☑ Office Centrally located, Island wide jobsite attended required

☑ Good Benefits + Career Growth

☑ Experience in Fire Protection Project is advantageous!!

Responsibilities:

• Conduct site inspections, gather data, and coordinate with the design team for drawings.
• Verify drawings before construction, addressing customer requirements.
• Coordinate with design team, customers, and subcontractors during construction.
• Inspect and ensure quality work from subcontractors; assist Project Manager in meeting project timelines and safety standards.
• Oversee testing, commissioning, customer training, and final inspections for as-built drawings.

Requirement

• Diploma / Degree in Mechanical Engineering or any related field.
• 1-3years of Project Management experience.
• Knowledge of ISO 9000 standards, problem-solving, and analytical skills.
• Proficient in English, computer skills, and experience with LTA projects preferred.

Interested applicants are welcome to apply online with updated Resume.

Only shortlisted candidate will be notified

Yvette Kam Soo Leng

Registration: R22107492

Roles and Responsibilities:

· Install, upgrade, support and troubleshooting for printers, computer hardware

· Provide technical support to ensure the smooth operation of PCs/ NB/Servers, Network switch, Router, Firewall, Printer through regular maintenance & housekeeping

· Diagnosing and resolving of hardware and software problems, installing software and new applications as well as providing advice and assistance to users.

· CCTV Installation and support

· Responsible for hardware repair and replacement

· Setup and install Point -of- sales hardware and software

· Any other ad-hoc duties assigned

Requirements:

· Diploma /bachelor’s degree in computer, Electrical & Electronic Engineering

· Minimum 5 years of hands-on embedded systems experience

· Good interpersonal and communication skills

· A team player and technically motivated to solve problems

Staff Benefits:

• Medical Insurance Coverage
• Staff Discounts
• Birthday Vouchers
• Good Career progression

• Design, develop, and maintain scalable ETL/ELT workflows using Spark, SQL, and Python on the Azure Databricks platform.

• Build and optimize data pipelines on the ADA platform to support advanced analytics and business intelligence.

• Import and process metadata and data from multiple sources (e.g., S3 buckets) to support reporting and analytics.

• Implement data quality checks, data validation, and ensure accuracy in processed data.

• Hands-on experience in cloud services (Microsoft Azure) and data warehousing.

• Proven experience in predictive modelling, analytics, and creating dashboards for KPI tracking.

• Programming Languages: Python, Scala

• ETL Tools: Informatica, SAS

• Database Management: Oracle, MySQL, MS SQL Server, MongoDB

• Scripting: SQL, PL/SQL

• Development Tools: Eclipse, IntelliJ, Jupyter Notebook, Notebook

• Version Control and Build Tools: Maven, SBT, Git

• Methodologies: Agile, Scrum

• Operating Systems: Windows, Unix, Linux

• Microsoft Cloud Services: Azure Databricks, Azure Data Factory, Azure SQL Data Warehouse, Azure Data Lake Storage, BLOB Storage

*Compensation package will be commensurate with experiences.

Responsibilities:

• Design and develop robotic automation systems and solutions.
• Program robotic systems using relevant programming languages (e.g., Python, C++, Java).
• Collaborate with cross-functional teams to analyse workflows and identify automation opportunities.
• Create and conduct tests to validate robotic systems and ensure reliability.
• Implement and maintain control systems for robotic applications.
• Troubleshoot and resolve issues with automated systems in real-time.
• Document system designs, processes, and technical specifications.
• Stay updated with the latest advancements in robotics and automation technologies.
• Other ad hoc duties as required.

Requirements:

• Minimum Diploma in Computer Science, Mechanical Engineering (Robotics), or a related field.
• Proficiency in programming languages relevant to automation (e.g., C++, Python, PLC programming).
• Proven experience in robotic automation design and implementation.
• Excellent communication and documentation skills.
• Basic theoretical knowledge on control theory and path planning algorithms.
• Practical hands-on experience with Motion control and path planning for mobile robots.
• Strong understanding of software development principles, including object-oriented design and software architecture.
• Knowledge of real-time and embedded systems programming.
• Experience with version control systems (e.g., Git) and collaborative development.
• Familiarity with cloud-based automation solutions, IoT applications, sensor integration, computer vision, and machine learning.

• As a Platform Engineer, your role is to design, develop, and maintain distributed applications using the Oracle Tuxedo middleware platform and other technologies.

• Designing and developing distributed applications using Oracle Tuxedo middleware platform.

• Writing efficient, scalable, and reliable code in programming languages such as C, C++, Java, or COBOL to implement application logic.

• Configuring and managing the Oracle Tuxedo environment, including setting up application servers, managing resources, and optimizing performance.

• Collaborating with cross-functional teams, including business analysts, system administrators, and database administrators, to gather requirements, design application architecture, and ensure seamless integration.

• Developing and maintaining documentation for applications, including code comments, technical specifications, and system configurations.

• Performing unit testing, debugging, and troubleshooting to ensure the applications meet functional and performance requirements.

• Conducting performance tuning and optimization of Oracle Tuxedo applications.

• Keeping up to date with the latest Oracle Tuxedo platform updates, technologies, and best practices in distributed application development.

• Providing technical support and guidance to other team members and stakeholders.

• Participating in code reviews and ensuring adherence to coding standards and software development best practices

• 8 years of expertise in ETL, Data Warehousing, and Big Data technologies. The candidate should have a strong background in IBM InfoSphere DataStage, Oracle PL/SQL, Unix Scripting, and hands-on experience with Moody’s tools.

• The role requires in-depth knowledge of data extraction, transformation, and loading (ETL) processes, as well as experience with CI/CD and automation tools to support efficient data operations. This is an opportunity to contribute to large-scale data projects and work closely with cross-functional teams in a challenging and dynamic environment.

• Design, develop, and maintain ETL processes using IBM InfoSphere DataStage (versions 8.1, 8.7, and 11.3).

• Build and optimize parallel jobs to clean, transform, and load data into target databases.

• Implement robust solutions for data extraction and transformation from various sources including flat files and RDBMS.

• Configure and manage job scheduling and automation using tools like Control-M and Autosys.

• Develop shell scripts and use Unix commands to enhance ETL performance and streamline data processing.

• Ensure efficient job execution, error tracking, and troubleshoot performance issues.

• Use Moody’s tools (RCO, RAY, RFO) to support liquidity, risk management, and financial reporting projects.

• Troubleshoot and resolve issues related to GL recon breaks, ALM/LIQ stress processes, and LCR processes.

• Support Big Data solutions by working with core Spark (batch processing) and Spark SQL using Scala.

• Use Hadoop technologies like HDFS, Hive, and Sqoop for large-scale data migration and analysis.

Responsibilities

As a System/ Network Engineer, you will be responsible for the following:

System And Network,

Able to configure CISCO, Fortinet, Juniper, Firewall & Antivirus, and other security software.

Experience with CISCO core switches, Access Points (Wireless) such as Aironet / Meraki / HP Aruba is a plus.

Familiarize with CISCO Network LAN & WAN design.

Pre-sales to Point to Point and Client VPN.

Setup and perform troubleshooting with network technical skills, including CISCO Routers, CISCO Switches, wireless devices, Fortinet Firewalls, Load Balancers, and system management tools like Network Analysis.

Install WINDOWS Server O/S, WIN 11, Microsoft 365, Microsoft Platform for Servers, and PCs with hands-on experience in setup and configuration.

Knowledge of setup/configure VMWare, Exchange Server, SQL, and Virtual Server, along with hardware configuration experience (Server, external backup, UPS) in FAS System, HPE Storage, Synology NAL, etc.

Job Description

Rack/stack IT Equipment.

Installation/configuration of various OS (Windows, Linux, Vmware).

Work closely with Team Leader to meet system delivery milestones.

Engage with back-line support and/or with vendor’s support to diagnose and rectify technical problems.

Assist in day-to-day operation of the System Delivery team.

Carry out other technical related duties that may be required.

Design and implement LAN, WAN, VPN, and wireless networks.

Configure and Network security appliances such as firewalls, routers, and switches.

Requirements

Diploma/Degree in Information Technology, Computer Science, Engineering or equivalent

Able to configure/design and provide consultation for Cisco Switches, Router and Fortigate Firewall

3 – 10 years of relevant experience in server implementation / operation / administration for Vmware / Storage / Redhat / Windows.

Good analytical and problem-solving skills

Possess initiative with positive working attitudes

Strong teamwork, communication and interpersonal skills

Ability to work after office hours/weekend for systems preventive maintenance

Responsibilities

As a System/ Network Engineer, you will be responsible for the following:

System And Network,

Able to configure CISCO, Fortinet, Juniper, Firewall & Antivirus, and other security software.

Experience with CISCO core switches, Access Points (Wireless) such as Aironet / Meraki / HP Aruba is a plus.

Familiarize with CISCO Network LAN & WAN design.

Pre-sales to Point to Point and Client VPN.

Setup and perform troubleshooting with network technical skills, including CISCO Routers, CISCO Switches, wireless devices, Fortinet Firewalls, Load Balancers, and system management tools like Network Analysis.

Install WINDOWS Server O/S, WIN 11, Microsoft 365, Microsoft Platform for Servers, and PCs with hands-on experience in setup and configuration.

Knowledge of setup/configure VMWare, Exchange Server, SQL, and Virtual Server, along with hardware configuration experience (Server, external backup, UPS) in FAS System, HPE Storage, Synology NAL, etc.

Job Description

Rack/stack IT Equipment.

Installation/configuration of various OS (Windows, Linux, Vmware).

Work closely with Team Leader to meet system delivery milestones.

Engage with back-line support and/or with vendor’s support to diagnose and rectify technical problems.

Assist in day-to-day operation of the System Delivery team.

Carry out other technical related duties that may be required.

Design and implement LAN, WAN, VPN, and wireless networks.

Configure and Network security appliances such as firewalls, routers, and switches.

Requirements

Diploma/Degree in Information Technology, Computer Science, Engineering or equivalent

Able to configure/design and provide consultation for Cisco Switches, Router and Fortigate Firewall

3 – 10 years of relevant experience in server implementation / operation / administration for Vmware / Storage / Redhat / Windows.

Good analytical and problem-solving skills

Possess initiative with positive working attitudes

Strong teamwork, communication and interpersonal skills

Ability to work after office hours/weekend for systems preventive maintenance

Role:

• Diagnose and troubleshoot problems with marine engines, auxiliary engines, steering systems, and other related components.
• Carry out repairs on inboard and outboard engines, including work on fuel, cooling, and exhaust systems.
• Perform routine maintenance to ensure all shipboard systems are functioning properly.
• Maintain cleanliness of the ship and engine room while onboard.
• Provide detailed reports on work performed and communicate the nature of repairs and services to customers.

Safety and Compliance:

• Follow all safety protocols and regulations to maintain a safe working environment.
• Ensure compliance with environmental regulations related to marine services and repairs.

Documentation and Reporting:

• Keep accurate records of all services performed, including time spent, parts used, and labor involved.
• Use service management software to log and track repairs and maintenance tasks.

Team Collaboration:

• Collaborate with other technicians and service team members to ensure efficient workflow and high levels of customer satisfaction.
• Assist in training and mentoring junior technicians as required.
• Perform any other duties as assigned.

Requirements:

• Diploma or equivalent; technical certification or associate degree in marine mechanics or a related field is preferred.
• Minimum of 2 years’ experience in marine service and repair.
• Strong mechanical skills and ability to solve problems.
• Proficient in using diagnostic tools and marine service equipment.
• Knowledge of marine engines, auxiliary engines, and cargo pumps.
• Ability to read and understand technical manuals and schematics.
• Capable of lifting heavy objects, working in various weather conditions, and performing physically demanding tasks.

Salary Range: 3,000 - 4,500 basic + sales commission

Working Hours: Monday to Friday, 8:30 AM – 5:30 PM
Location: Woodlands

Job Scope:

- Working together with sales team to maintain or excel (but not constrainted to) a
minimum monthly sales target of S$100,000. (As a good guide for fluctuating monthly
sales, the figure may be calculated base on a three month average).
- To help in the servicing of customers in terms of conceptualizing of machine
processes, writing up of proposals and quotations.
- Help OM (Operations Manager) in the planning of capacity to ensure timeline is being
met. This is done with the help of a Master Project Schedule.
- Coordinate with internal and external designers on the customer requirements to
ensure customer needs are met.
- Project monitoring to ensure timely delivery of goods.
- To be involved in the process of new business development in new areas of industries.
- Involved in public relations taking care of overseas partners and customers.

Job Requirement:
- With at least 3 years experience in Manufacturing Automation Machines. Knowledge in
CAD software and common Miscrosoft software is required.
- Educational qualifications: Diploma (or higher) in any discipline. Those with related
experience may apply.
- Good interpersonal communication skills are required, with proficiency in both English and Mandarin, as the role involves working with customers globally.

- Frequent travel may be required for sales activities.

- Class 3 driving license is an added advantage, as travel to meet clients may be necessary.

- Own vehicle is preferred (car allowance provided).

Benefits:
Annual Wage Scheme - (Basic annual + 13th month ++) depends on company performance
Performance Bonus - (Depending on Sales and Nett profit)

Job Overview:

As an AIGC/ Gen AI engineer, you will be responsible for pushing the boundaries of image & video generation technology for online AI applications. You will design and implement advanced image & video generation models capable of generating target images with different styles (e.g., in news, gaming applications). Additionally, you will stay abreast of the latest research developments in the image & video generative-AI technology field to ensure our solutions remain industry-leading.

As an AIGC/ Gen AI engineer in Singapore, you will design and implement image & video generation models to support the content generation tasks in AI application. Key domains of focus include text to image generation, image to image generation, text to video generation, and image to video generation.

Responsibilities:

• Investigate and apply the latest image/video generation models for various AI applications (e.g., gaming and news).
• Design and develop the text to image, image to image, text to video generation methods based on application objectives.
• Fine-tune the image and video generation models based on different targets, e.g., to generate images/video in different styles.
• Develop and train other relevant models (e.g., LoRA, ControlNet) to optimize generative content quality.
• Model inference and speed optimization to achieve online application latency requirements.
• Ability to identify the reasons on generated image/video quality issues, and find out possible solutions.

Requirements:

• Bachelor's degree or above in Computer Science, Artificial Intelligence, Electronic Engineering, Data Science, or related fields.
• A minimum of 2 years of hands-on experience with the latest image or video generation models, such as SDXL, SD 3 medium, stable video diffusion, etc.
• Proficiency in deep learning frameworks (e.g., PyTorch, TensorFlow) with experience in building end-to-end online image/video generation applications (e.g., in chatbots/agents).