Job Description

1. Oversee the works on equipment structures, installations, deployments, facilities, and equipment being deployed at sites.

2. Plan and work out the resource provision requirements, work, schedule, and Standard Operating Procedures (SOP) for works at sites.

3. Review planned work schedule and method statements prior to commencement of site work activities.

4. Ensure that works are carried out accordingly to design, meeting the safety, health, environmental and comfort requirement for stakeholders.

5. Identify defects and damages at the site infrastructures, including equipment and facilities, as well as theft, accidents, and incidents.

6. Carry out safety training to instil safety awareness. Ensure safety rules and regulations at sites are adhered to by all site personnel.

7. Be part of Safety Committee and ensure compliance to safety, health and environmental requirements including Authority Code of Practices (COP) and WSH, MOH & MOM Guidelines.

8. Resolve any unexpected problems or difficulties that may arise at sites.

10. Prepare regular reports to update site progress, resource utilisation, requirements, past and on-going activities, etc.

Requirements

1. Minimum bachelor’s degree with at least Six (6) years’ relevant field safety experience in supervision of installation and maintenance of roadside and Civil and structural coordination with government/utility agencies and other contractors.

2. Experience as a safety auditor/inspector in ensuring Environmental, Safety and Health practices are complied with.

3. Strong analytical and problem-solving skills, resourceful and meticulous.

4. Highly motivated and pro-active with the ability to work both independently as well as in a team.

5. Proficient in Microsoft Office (Outlook, Word, Excel, and PowerPoint for Windows.

6. Good verbal communication and writing skills in English.

7. Be expected to travel regularly between office and sites.

8. Prepared to work on site and perform night work based on project needs.

• A1 Main Contractor
• 5.5 Alternate saturdays (South of Singapore)
• Building Project

Our client is in the Civil & Infrastructure Contractor and has a strong presence globally. They are looking to fill the role of C&S Design Engineer

Responsibilities:

• Prepare technical reports, designs, and detailed drawings.
• Perform calculations for pressures, loads, and stresses.
• Assess the strength of construction materials and select them appropriately.
• Provide expert advice on safe construction and design practices.
• Secure planning permissions and ensure compliance with building regulations.
• Analyze the configuration of essential structural components.
• Oversee and inspect contractor work to guarantee structural integrity.
• Inspect properties to assess conditions and foundational stability.
• Utilize computer-aided design (CAD) software for simulations and modeling.

Requirements:

• Degree in Civil or Structural Engineering.
• Professional registration with the Institute of Structural Engineers.
• Proven experience in project management.
• Advanced knowledge of construction techniques, materials, and legal standards.
• Strong grasp of physics and mathematics.
• Ability to collaborate effectively with other professionals.
• Exceptional attention to detail and excellent organizational skills.
• Ability to work efficiently under pressure and meet deadlines.
• Excellent communication skills and proficiency in IT.

OTHER INFORMATION:

• Location: South
• Working days: 5.5 Days
• Salary: Up to S$7,500 / Negotiable and Bonus (salary will be commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction by providing attractive staff benefits, welfare & training programmes to all staff.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, David , at 6590 9958 or 9271 7510 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

About Our Client

• Logistics Freight Forwarding Solutions @ Kranji
• Normal Working Hours: Mon - Fri @ 8am - 5pm
• Basic + AWS + PB

Job Description

• Design and optimize packaging processes using Solidworks.
• Create technical drawings and packaging layouts compliant with ASTM standards.
• Improve production efficiency and reduce waste through process optimization.
• Collaborate with production, quality, and logistics teams to ensure smooth operations.
• Ensure packaging meets quality standards, including ASTM compliance, through testing and inspections.
• Troubleshoot process issues and provide technical support.

The Successful Applicant

• Min. NITEC/Diploma in Engineering or equivalent.
• With relevant experience or knowledge in packaging/ crating work preferred
• Understanding of ASTM international standards.
• Proficient use of Solidworks software.
• Able to manage multiple projects in a fast-paced environment with strong project management skills.

Reach out

Please submit your updated resume by using the APPLY NOW button

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to Kanry Search Singapore Pte Ltd’s PDPA and e2i’s PDPA.”

Kanry Search Singapore | 24C2261

Sarah Lau | R22110930

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for a minimum of 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

Salary: (Junior, 2-4 yrs related experience: upto 4,000)

Time : Mon - Fri: 8.30am – 5.30pm

Location :Woodlands

JOB SCOPE (Design Engineer)

- Design, test, debug and commission the company’s product, which include jigs and fixtures, customized semi and fully automatic machines.

- Attend meetings with customers to discuss on their requirements in new projects and/or project proposals.

- Research and develop new ideas and concept to enhance company’s performance and competitiveness in the field of industrial automation.

- Procure and/or assist in the procurement of necessary items to enable the performance of above duties.

Requirements

- Minimum ITE, Diploma or Degree in Mechanical Engineering

- Minimum two years’ experience in customized Automation Machine Design.

- Experience in customized semi-con/ connector/ machine design preferred.

- Knowledge in Solidworks preferred, familiar with Pro-E and Inventor added advantage.

- Intuitive in mechanical movement, function and performance, good perception of 2D & 3D objects.

Probation period - (3 to 6 months)

Annual Wage Scheme - (Basic annual + 13th month ++)

Performance Bonus - (Depending on Sales and Nett profit)

Job scope

• Develop mechanical design concepts and create 3D/2D CAD models
• Perform design validation through simulations and testing
• Select materials and optimize designs for cost and manufacturability
• Collaborate with cross-functional teams for integrated solutions
• Ensure compliance with industry standards and quality control
• Support manufacturing during design-to-production transition
• Maintain design documentation and implement continuous improvements
• Communicate with clients to refine requirements and provide technical support

Requirements

• Diploma/Degree in Electrical Engineering with 2-3 years of relevant experience
• Experience in designing and developing customized automation machines
• Proficient in writing PLC application programs (Omron, Allen Bradley, Siemens, etc.)
• Familiar with PC-based programming (Visual Basic, C++, etc.) for machine controls
• Hands-on experience with schematics and electrical layouts, and able to guide technicians
• Occasional travel required

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• ecome the technical Expert for the respective machine specialization.
• ● Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Preferred 3 years of relevant work experience in Etch Equipment
• LAM & Oxide tools preferred
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Roles & Responsibilities:

• Responsible to create concept designs for sales proposal and as well as detail design for confirmed projects;
• Ability in selecting the right components, design of fabrication items as well as working with vendors/sub-con for assigned projects;
• Responsible for planning and executing strategies for completing projects on time and also managing the projects’ budget;
• Exhibit a level of creativity and ingenuity, as well as problem solving skills, to provide reliable, cost-effective solutions to design issues and attend to customers’ enquiries;
• Working with respective project engineer and assembly team on project schedule management, budget management, as well as customer’s review/discussion.

Job Requirements:

• Minimum of 3 years relevant experience in related process manufacturing
• Degree in Mechanical Engineering
• Working knowledge of high-level communication protocols and troubleshooting skill
• Good analytical and planning skills
• Able to work under very tight project timeline
• Independent and good team player
• Willingness to travel overseas, as required

ROLE DESCRIPTION SUMMARY

Join us as a Project Safety Engineer (PSE), where you will be responsible to perform systems safety engineering activities required to develop a safe solution (mainly a software), product or projects. In this role, you will apply your Safety Engineering skills within an interdisciplinary team covering all aspects of a system lifecycle.

KEY ACTIVITIES AND RESPONSIBILITIES

As aProject Safety Engineer, you are accountable for:

As a Project Safety Engineer, you conduct safety engineering activities and produce the required artefacts on time, budget and quality for the allocated project / product.

This includes:

· Conducting a range of activities that identify and address safety hazards and risks by ensuring compliance to legislations, safety policies and the Thales Solution Safety Management System

· Developing and maintaining safety key artefacts: system safety program plans, safety case reports, hazard logs, risk assessments, preliminary system safety assessments and system safety assessments commensurate with the processes, standards and best practices employed by air traffic management domain including fault tree analysis and GSN

· Work closely with the engineering integrated product teams to identify, derive and manage safety requirements, ensure that they are included in the solution design baseline and that their compliance is demonstrated through verification & validation and developing effective mitigations and controls to hazards, procedure and/or training

· Provide timely safety subject matter expertise and engineering support. This includes participating and/or chairing system safety working groups, safety review boards and other safety committees and workshops as required

· Apply Model Based System Engineering tools and modelling methodologies to define system safety functions and requirements as well as managing safety data

· Escalate risks when necessary, provide clear reporting and recommendations

· Work in accordance with Thales processes and practices, and contribute to their improvement

You will also improve the Safety culture within AMS in Singapore by developing, sharing and/or improving safety training material, delivering training as required and pro-active behaviour.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

SKILLS & ABILITIES

· Experience in the Systems Safety Engineering process in a safety critical industry such a Defence, Land Domain, Manufacturing, Vehicles, Railway, Aerospace, Nuclear or Oil & Gas

· Demonstrated experience applying industry best practice system safety analysis and operational risk management techniques and methodologies

· Proven track record of successfully leading the execution of system safety programs

· Familiarity with Eurocontrol Safety Assessment Methodology and its system safety engineering processes including core system safety analysis techniques: FHA, PHA, PSSA, SSA, ETA, FTA, HAZOP, FMECA, RAM, etc.

· Experience and understanding of the V-cycle and how/when the safety engineering activities are interfaced with

· Knowledge of international standards of the safety domain: ARP 4761/4754, DO-278A/178C, ED-153

· Excellent problem solving and decision-making abilities, great and positive attitude, ability to learn

· Adapt easily to change to work in an agile system engineering environment to understand a problem and provide optimal solution options in terms of size, scale and complexity

· Able to travel to Melbourne, Australia (a few weeks a year).

EXPERIENCE

· Minimum 10 years’ experience in a similar or adjacent role

· Familiar with management and engineering tools such as DOORS, Polarion, JIRA and FTA tool

· Experienced in top-down (abstract ideation) and bottom-up (detailed implementation) approaches in engineering solutions and can work with colleagues with these views

· Knows the structure of a software and be able to apply safety techniques

· Team player: harmonising, influencing, negotiating, seeking feedback and mentoring / coaching

· Self-driven and highly motivated, passionate about systems safety engineering and continual process improvement to achieve optimal outcomes for all stakeholders

· Keen to grow product and process knowledge over time, to enhance your capabilities as a System Safety Engineer within the given environment of practice

· Knowledge of ‘design-to-cost’ approach means and can quickly preform a cost-benefit analysis to different methodologies before executing a system engineering task

· Excellent written and oral communication skills in English

QUALIFICATIONS

· Engineering or Computer Science degree

· System Safety degree

DESIRABLE

· Understand and application of RAMS techniques such as RBD, life data analysis, MTTF, MTBF, MTTR, FMECA

· Knowledge of transverse engineering disciplines: human factor and cyber-security and their links with safety engineering

· Experience in the development of software products and projects in a variety of methodologies, with a particular focus on iterative/agile development

· Conduct independent safety assurance activities including auditing

· Experience in the ATM Domain and related standards (ICAO)

· French language knowledge

General / Special Requirements

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Descriptions:

• Position : HVAC Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $6,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Engaged in all mechanical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Participated in design and construction document preparation and submissions.
• Conducted technical review and clarifications with customer and suppliers.
• Coordinated design efforts with other engineering disciplines.
• Participated in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Monitor the progress of the document submission.
• Performed some drafting scope and also guide drafters for drafting.

Requirements:

• Minimum Diploma/Degree in Engineering or related field.
• Relevant job experience in oil and gas/process/marine industry preferred.
• Must have basic mechanical design knowledge.
• Proficient in performing HVAC cooling capacity calculations, pressure drop calculations, and duct sizing.
• Experienced in duct installation and HVAC system installation.
• Skilled in creating piping and instrumentation diagrams (PID), Airflow diagrams, and ducting and instrumentation diagrams (DID).
• Knowledgeable in basic pipe sizing, selection, and pipe installation.
• Familiar with basic fire suppression systems.
• Proficient in using AutoCAD for drawing and design.
• Proficient in MS Office applications.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

ob Responsibilities and Duties :

- Develop a deep understanding of design specifications based on customer requirements, , organizational goals, and business strategies. Conceptualize and develop solutions based on project requirements and Company standards through the use of simulations/modelling to support design concept used.

- Develop design specification sheet with relevant info related to the project and update as and when required and distribute to relevant parties.

- Carry out detailed cycle time study for individual modules to select the appropriate machine or module design. Develop 3D model of the machine and/or modules assigned with optimised design for manufacturing, cost, quality and safety.

- Initiate and carry out internal design reviews to share and explain the completed modules with other departments.

- Initiate and carry out design review with customer base on project schedule

- Revise design and documents based on both internal and external review·

- Create and update flow chart for the module or the entire machine

- Create part drawings and assembly drawings based on approved design and obtain approval from department manager

- Create Bill Of Materials (BOM) for the modules assigned based on design schedule given.

- Create drawing release file and send out drawings for quotation

- Send out standard part list for quotation based on BOM.

- Receive quotation and make price comparison spreadsheet

- Raise PR and get department manager approval and send to Purchase department for negotiation and ordering.

- Promptly support any design issues discovered during fabrication and /or assembly stages

- Make necessary modifications needed, update design, drawings and get approval from department manager.

- Release revised drawings to supplier and internal assembly team.

- Support machine assembly team as and when necessary, with set up and fine tuning of machines.

- Carry out all the activities based on the project schedule given.

- Meet quality standards while maintaining working knowledge of relevant technologies and best practices, and upholding company policies, internal, customer standards for machine building and safety.

- Develop, train, and educate junior engineers, guide technical direction, and act as a technical liaison between customers

The role of the Art & Design Technician is a key role within the Expressive Arts department and the wider community. Working alongside the teaching team, the technician will ensure that all students have the best possible experience in Visual Art and Design Technology, providing robust support for teaching and learning and curriculum delivery.

This role exists to support the smooth running of the Art and Design Technology classrooms, prep rooms and stores to support teaching and learning in the classroom. The technician role offers challenge and requires initiative alongside responsibility. The DCIS Art and Design Technician will be responsible for four specialist teaching spaces in the secondary school. This will involve preparing resources, equipment, and teaching materials for lessons, clearing up after lessons, managing and maintaining good order in the prep rooms, overseeing equipment, and maintaining stock levels of consumable materials. There is also a requirement to support school events relating to the faculty, including exhibitions, and performing arts productions and concerts.

Core Requirements of the Post

In fulfilling the requirements of the post, the art and design technology technician will aspire to the highest standards of professionalism and will, in particular:

▪ Support teaching staff by selecting and managing suitable materials to help promote Art and DT as a practical subject at KS3, IGCSE and IB level and in line with health and safety guidance.

▪ Manage the availability of, prepare and provide resources, equipment and other teaching materials as requested by the faculty teachers. The faculty uses a range of mixed media including wood, plastics, metals, fabric, print and paint. Experience with these materials and machinery related is desirable.

▪ Organise and manage the use of resources and materials, including the preparation of the material for lessons and safely disposing of waste following lessons.

▪ Managing H&S systems within each classroom and work with the Head of Art and Design technology to resolve any concerns, ensuring all safety protocols are followed.

Coordinate the procurement of materials / equipment alongside the Head of Art and Design Technology, and repair / replace / increase stock levels to accommodate changes in cohorts and curriculums.

Areas of Responsibility and Key Tasks

• Advise teaching staff on suitable materials to help promote subjects at KS3, IGCSE and IB level and in line with CLEAPPS guidance.
• Adhere to NAE and IGCSE/IBO/CIS/WASC specifications and requirements.
• Manage the availability and preparation of resources and equipment for lessons including but not limited to making exemplars and demos, prepping woodwork, kiln loading, 3D printing and laser cutting.
• Operate an up to date, online system of monitoring the availability of materials, resources and equipment.
• Manage the annual safety checking of equipment required.
• Support with reprographics and ICT
• To assist with the documentation of students work for submissions and exhibition.
• To understand and explain the use of new equipment and advise how it could be used in schemes of work.

Prepare and manage faculty spaces to aid teaching and learning.

• Keep storage areas clean and well organized, as well as sinks and worktops.
• Dispose of waste, recycle and reuse materials appropriately, heavy lifting sometimes required.
• Report any defects and damage to equipment to line manager and to arrange repair/service by the appropriate body when not in line with H&S guidelines.
• Support with mounting and displaying of students work around the school.

Procurement

• Update records maintaining an up- to- date inventory of equipment, materials, resources and their locations
• Order materials as requested, liaising with procurement department.
• Organize and check order deliveries. Inform the Head of Art and Design Technology if any equipment is faulty or materials are missing and follow up as directed.
• Distribute new stock and resources appropriately as instructed.
• Maintain a supplier database.
• Keep equipment and daily perishables clean, organized and well maintained.
• Review equipment needs within the department and advise on the purchase of new and replacement equipment.

Technical Support in Lessons

▪ Assist teachers, as requested, to facilitate student learning with respect to specific outcomes.

▪ Advise staff and visiting teachers about resources and equipment available.

▪ Advise teachers of activities that may support targeted learning outcomes.

Professional Responsibilities

▪ Support the life of the school beyond the classroom. Carry out additional reasonable duties as request by Line Managers or the Senior Leadership Team.

▪ Lead or support one or more afterschool co-curricular activities.

▪ Participate in day and residential weeks and other trips as required.

▪ Contribute to whole school learning initiatives duringthe term.

▪ Attend professional learning opportunities as directed.

Personal Requirements:

▪ Able to work with students and staff in the secondary school as an effective team-player.

▪ Self-sufficient and self-starter who can manage their time independently.

▪ Up to date with the latest trends, technologies, and techniques in your specific skill base.

▪ Ability to solve problems creatively and efficiently.

▪ Able to assist students as needed both academically and during practical activities.

▪ Able to support enrichment activities such as field trips and after school programmes (Trips and exhibition set up may occasionally go outside of school hours).

Promote and adhere to the Nord Anglia Education vision and values:

▪ Opportunity - for us, opportunities need to be meaningful, about achieving potential and making progress.

▪ Impact - for us, impact is about making a difference. It needs to be immediate, positive and lasting.

▪ Leadership - for us, leadership is about considering the teamʼs needs as well as your own, setting inspiring examples, being supportive and showing real accountability and responsibility.

▪ Respect - for us, respect is about listening, being inclusive, showing tolerance and getting the little things right.

All staff are required to manage effective personal development as part of NAEʼs commitment to invest in staff as the key resource in the organisation.

Each individual must ensure that they meet their statutory responsibilities and adhere to NAE and school policies with regard to Health and Safety, Equal Opportunities and other relevant legislation.

PERSON SPECIFICATION:

Experience

Worked with children within the age ranges of 11–18.

Skills

• Excellent oral and written communication skills.
• Ability to build productive positive relationships with young people to support their well-being and learning.
• Strong organisational skills.
• Personal Attributes
• Passionate about education and young people.
• Evidence of commitment to continuous professional development.
• Good sense of humour and collegial approach to directed tasks.
• Physically fit and healthy with a good stamina.

Other

• Hold a current Enhanced Criminal Records Bureau Disclosure or equivalent for countries lived in outside of the UK.
• Compliance with visa requirements for working in Singapore.
• A commitment to safeguarding and promoting the welfare of all pupils and the willingness to undertake appropriate child protection training when required.

Safeguarding

At Nord Anglia Education we are committed to providing a world class, safe, happy environment in which children and young people are able to thrive and learn. We are committed to safeguarding and promoting the welfare of all our students irrespective of race, ability, religion, gender or culture.

All post holders in regulated activity (having regular unsupervised contact with children) are subject to appropriate national and international vetting procedures including satisfactory criminal record checks from both your country of residence/birth and any country of residence within the last 10 years. The school will support candidates to obtain this.

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

· Responsible for preparing and modifying schematic, detailed, and production drawings for precast concrete components, steel moulds, and reinforced concrete (RC) structures.

• Responsible for creating 2D and 3D presentations and design drawings, while developing solutions to technical and design challenges in compliance with Singapore's established standards.
• Responsible for compiling data and performing basic design computations.
• Participate in client liaison, authority consultations, coordination with consultants and subcontractors, and attend design and construction meetings.

Requirements:

• Diploma or Degree in Civil Engineering
• At least 5 years of related working experience
• Experience in checking Precast Concrete Shop Drawings and working with Precast Concrete Supplier Design Team

If you are interested, please send in your updated resume by clicking “Apply now” or email to [email protected]

Lim Siew Hua

Registration Number: R1984199

Workstone Pte Ltd

EA License Number: 19C9998

(Only shortlisted candidates will be notified.)