Job Responsibilities:

• Advanced low-power physical design/integration flow development.
• Full-chip floor planning and place & route.
• Power network design and analysis.
• Support signoff timing closure, power integrity, and signal integrity.
• Physical Verification using DRC, LVS.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power physical design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

JOB HIGHLIGHTS

• Design Jig, Equipment Design and development.
• Provide Conceptual and detail design of various module of automation system
• Closely follow up with customer from design review to end of the project.
• Create and maintain necessary engineering document require for the project.
• Handle customers’ enquiries and issues.
• Collaborate with other engineers, technicians, and manufacturing personnel to ensure smooth project execution.
• Contribute to the development of engineering standards and best practices.

REQUIREMENTS:

• Familier with Inventor or AutoCAD drafting software.
• Able to work independently and within schedule.
• Bachelor's degree in Mechanical Engineering or a related field.
• Strong understanding of mechanical design principles, materials science, and manufacturing processes.
• Passion for innovation and continuous improvement.

A structural formwork designer in the construction industry plays a critical role in ensuring the safe and efficient design of temporary structures required for concrete placement. This role requires a strong foundation in structural engineering principles, proficiency in design software (e.g., AutoCAD, Revit, Tekla), and practical knowledge of construction methods and materials. Effective communication and problem-solving skills are also essential to succeed as a structural formwork designer.

1. Design formwork systems (aluminium formwork and system formwork) to support concrete structures (slabs, beams, columns, walls, etc.) during construction.
2. Ensure designs adhere to engineering principles, building codes, and safety regulations.
3. Select appropriate materials (e.g., plywood, aluminium, steel) based on project specifications.
4. Perform structural analysis to determine load capacities, deflection limits, and stability of formwork systems.
5. Ensure designs can withstand live loads, dead loads, and environmental factors (wind, vibration, etc.).
6. Work closely with project managers, site engineers, and construction teams to align formwork designs with construction schedules and site conditions.
7. Coordinate with architects and structural engineers to integrate formwork designs with overall project plans.
8. Ensure formwork designs meet safety standards and regulatory compliance.
9. Conduct risk assessments to identify potential hazards associated with formwork installation and removal.
10. Optimize the use of formwork materials to minimize costs and waste.
11. Explore reusable or modular formwork systems to enhance sustainability and efficiency.
12. Prepare detailed formwork drawings, specifications, and assembly instructions.
13. Provide technical support to site teams during formwork assembly, installation, and dismantling.
14. Research and implement new technologies and materials to improve formwork efficiency and durability.

Qualifications

• A diploma or degree in Civil or Structural Engineering, Architecture, or a related field.
• Knowledge of engineering principles related to load-bearing structures and construction methods.
• At least 5 Years of working experience in the related field.
• Required Skill(s): AutoCAD.

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Job responsibilities

1. Responsible for Physical Design for Full chip/Blocks covering Floor planning, Placement, Area Optimization, Clock tree synthesis, Placement optimizations, Routing, Timing Closure, power network design, Voltage drop analysis, RC extraction, etc.

2. Be a highly-valued member of our start-up like team through excellent collaboration and teamwork with other R&D Engineers.

3. Work with Frontend team to understand the RTL design and drive physical aspects early in design cycle for physical design closure.

Job requirements

1. Bachelor's degree or above, major in Microelectronics / Electronic engineering / Communication engineering and other related fields.

2. More than 3 years working experience in layout and wiring of 40 nm and below technology.

3. Able to independently complete the whole chip P&R process and IR_ Drop, STA, low power inspection.

4. Familiar with TCL or Perl and other scripting languages.

5. Familiar with design flows and EDA tool software.

6. Familiar with Sign-off methodology and the use of EDA tool software in STA / power.

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Mechanical Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Mechanical Design Engineer

Responsibilities:

Design and develop series of marking/inspection/ sorting/customised semiconductor equipment to meet the processing and automation needs of customers. Main duties involve

• Design standardization
• Costing and project management
• Machine and module conceptualization design
• Design for manufacturing (DFM), design for assembly (DFA) and Concurrent engineering
• Pneumatic/ hydraulic circuit design
• Detail fabrication drawings, assembly drawings and layout drawings
• Selection and sizing of standard components available off the shelf
• Undertake new product development or be involved in sustaining engineering/CIPs

Requirements:

• Bachelor/ Master of Engineering with minimum 5 years relevant experience
• 3D solid Modeling, preferably Pro-E (others like Solid Edge, Auto Inventor, Mechanical Desktop, Solid Designer are also acceptable).
• Strong project management skills
• Good track record in:

1. Ultra High Precision machine design
2. High Speed Pick and Place mechanism design
3. Structural, kinematics and dynamic analysis and FEA simulation
4. Geometrical tolerance and dimensional analysis (e.g. stack up error)
5. Engineering material selection
6. Design troubleshooting
7. Application of analysis tools like FMEA, DOE

• Knowledge of submicron semiconductor technology
• Familiar with digital ASIC/SOC design flow from RTL to silicon characterization
• Familiar with Synopsys and Cadence EDA tools for Simulation, Synthesis, Timing (STA), Formal and Assertion based verification, etc.
• Familiar with design and programming languages: Verilog, System Verilog, Python, Perl, C, C++, etc.
• Familiar with code base management method including subversion, git, GitHub, etc.
• Ability to apply analytical and problem-solving skills
• Strong written and verbal communication skills, ability to negotiate design features and options
• Knowledge of embedded system design, verification, and product development lifecycle
• Deep knowledge and domain know-hows in one or more areas below is a big plus.

Job Description:

• Overseeing projects at one or multiple stipulated sites.
• Assist project manager is the execution of the projects.
• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.
• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.
• Monitor and ensure progress of works are carried out according to project specification.
• Design schematic drawing, layout drawing, P&ID drawing.
• Review and check drawing before submit to main contractor.
• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.
• Support project manager in the administration of contract, claim, variation and any dispute arise.
• Raise MR and order material & arrange manpower for necessary works.
• Advise site team for work schedule and technical issues.
• Make sure project is carried out according to schedule.
• Responsible for site supervision and implementation.
• Responsible for ensuring implementing safety measures.

Requirements:
- Minimum diploma
- 3 years or above experiences in ACMV, especially in air-conditioning industry
- Able to use AutoCAD or other related software for ACMV Design
- Able to communicate Fluent in English
- Minimum 3 years in ACMV Sector

Job Requirements

• Leading a Team of Tankage Design Engineers to execute the Tankage Design Engineering of the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650, Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII & Cryogenic Double Wall Tanks as per API 620 & API 625.
• Review & Checking of Tankage Design Documents such as Design Calculation for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification, Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME Sec VIII, AP 2000 and all Applicable Codes & Standards.
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies.
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay / approvals / resolution of open issues.
• Review and ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Coordination with PMC and Construction Coordination.
• Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works.
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Preparation of Technical Specification for Works and Technical Bid Evaluation
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Preparation of Foundation Loading Data.
• Generate 2D construction drawings and data sheet.
• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system, aluminium dome roof & etc. Preparing technical bid evaluation for item purchased. Checking vendor’s calculation & construction drawings.
• Checking of construction drawings. Preparation of bill of material for purchasing.
• Preparation of technical queries to client base on design deviation.
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Minimum 15 years of experience

Software Requirements

1) Autocad

2) Good proficiency in MS Excel, MS word

Code Knowledge

1) API 650/ API 620

2) ASME Section VIII D1 & D2

3) ASME Section II Part A & D

4) ASTM

5) NFPA

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Scope:

• Design, develop and propose suitable machine vision system based on
  project requirements
• Initiative and proactively communicate well with customers, project
  managers and cross-department project team
• Perform software programming, UI design, and software performance
  optimization on the vision platform
• Numerous data analysis skills, but not limited to Minitab, Excel and SQL
• Travelled to customer’s site to perform setup, training, and support machine buyoff

Job Requirements

• Min Diploma in Electrical/Mechanical/Mechatronics/Electronics/Automation Control Engineer
• Experience from a company that is doing the customised Machine Design

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

THE ROLE:

As a member of the SoC Physical Integration team, you'll interface with various engineering groups, including architecture, design, CAD, software, and product engineering, across various geographies to work towards the physical/electrical verification and tape out of AMD SoC FPGA/ACAP devices. Common essential duties and responsibilities include, but are not limited to:

• Defining and developing flows and methodologies for chip level integration
• Developing tools for design verification or efficiency
• Designing (RTL and custom), verifying, and integrating FPGA/ACAP sub-blocks
• Coordinating activities between different design groups to ensure smooth integration
• Executing chip level physical verification
• Executing chip level electrical verification

PREFERRED EXPERIENCE:

• Basic understanding of FPGA architecture
• Knowledge of and/or experience with design and verification tools such as Virtuoso and Calibre
• Knowledge of and/or experience with P&R tools
• Fundamental circuit design knowledge including simulation experience with Spice and Verilog
• Strong debug skills
• Scripting experience using Perl, Python, TCL, C-shell, Make and/or other scripting languages
• Knowledge and experience with basic Unix data management and job control
• Excellent written and oral communication skills

ACADEMIC CREDENTIALS:

• BS with 2+ years of exp or MS in Electrical Engineering, Computer Engineering or related equivalent

LOCATION:
Singapore

Job Scope :

- 2D drafting and other documentation.

- Assists Senior Engineer on the following :

• Technical assignments involving basic or applied research or the design and development of hardware products that includes CIP, upgrades, End Of Life (EOL).
• Includes design and evaluation of mechanical and/or electromechanical devices, components or systems.
• Develop, test and document designs for the transport mechanisms, vacuum systems and various process stations, including deposition chambers, substrate heating, cooling, cleaning, etc.

- Participate in the overall detailed product design.

- Participate in design review by providing mechanical design inputs relating to DFM and DFA, etc.

- Prepare and release 3D Solid Models and Engineering drawing while communicating to local vendors to expedite delivery of design parts and assemblies.

- Performs other related duties as assigned..

Requirements:

- Nitec / Diploma in Engineering or equivalent

- 2 – 3 years of relevant experience

- Proficient user of Solidworks

- Knowledge of Orcad

- Experience in Machine Design and familiarity in Design Processes

- Knowledge of ECO release of Engineering quality documentation

- Experience in dynamic electro-mechanical system design and high vacuum design will be an advantage

We are looking for a creative, resourceful Mechanical Design Engineer to join us. The Mechanical Design Engineer is responsible for conceptual / detailed design and will have the opportunity to participate in prototyping, installation, testing and verification of their design. This role requires good technical writing skills to produce documentation for submission to Customers and Clients. The Mechanical Design Engineer will work with a multi-disciplinary team and exposed to interactions with customers, partners, vendors, and sub-contractors.

Job Requirement:

• Master/Bachelor Degree or Diploma in Mechanical/Mechatronic Engineering
• Well-versed with Solidworks and AutoCAD
• Well-versed with Microsoft Word and Excel
• Able to travel overseas when required
• Minimum 2 years of mechanical design or product development experience
• Good technical writing skill
• Basic knowledge of GD&T and manufacturing processes

Physical Design Engineer

Experience : 5+ Years

Salary Range :SGD 7000-10000

Skills & Technical Expertise Required:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

Worked on multiple tapeouts on Netlist to GDSII

Hierarchical partitioning and budgeting of block-level subsystems.

Implementation of high performance (HP) cores, low power designs

Node experience upto 3nm,7nm, 10nm, 14nm, 28nm.

Timing Signoff in loop through STA and ECO cycle at block and at interface.

Block level floor planning, power planning and IR drop analysis.

Scan chain reordering / Scan Chain repartitioning

CTS expertise and clock tree constraints creation for meeting specifications

MMMC optimization at Block and Sub-System Level

Timing closure with Crosstalk and AOCV / POCV

TCL scripting to fundamentally understand tool usage.

Mandatory EDA Skills

PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

1. Design and manufacturing of Mooring Winch, Towing Winch, Anchor Handling Winch, Linear Winch, Anchor Windlass, Marine Crane systems, anchor pipe system, post trenching equipment and other related marine equipment.

2. Carry out calculation work on T.C Marine and Offshore Equipment.

3. Conduct checks on the required marine classification standards for T.C Marine and Offshore Equipment.

4. Carry out the study and understanding of client’s technical specifications.

5. Carry out the project management and supervision of the Engineering process for the manufacturing and design of T.C products.

6. Ensure successful delivery of the completed products to client.

7. Resolve all technical problems arise from client during commissioning.

Job Scope :

- Assume responsibility for technical assignments involving basic or applied research or the design and development of Electrical hardware products. Includes design, fabrication, modification and evaluation of electromechanical devices, components or systems.

- Devise initial concept of assigned device, component or system and participate in the overall detailed Electrical perspective of product design.

- Creates original hardware, circuits, components, software, processes, and models to prove the feasibility of the design approach being investigated. Inclusive of Electronics and PCBA

- Participate in design review by providing inputs relating to DFM and DFA, etc.

- Prepare and release Engineering drawings/schematics while communicating to local vendors to expedite delivery of design parts and assemblies.

- ECO release of engineering documentation.

- Design of AC/DC power distribution systems including selection of circuit breakers, power supplies, contactors and cabling harnesses. Knowledge of PCBA Design, component selection and trouble shooting.

- Develop, test and document designs

- Develops estimates for products and projects. Power consumption, weight, size and schedule.

- Coordinates with manufacturing during pilot run and first production runs to ensure efficient transition from engineering into production.

- Interface effectively with customer to understand technical requirements and propose quality solutions.

- Possesses good electrical troubleshooting skills, and is able to troubleshoot at customer sites.

- Interfaces effectively with other organization such as Purchasing, Marketing, Service, and Quality Assurance as needed to carry out responsibilities

- Assists engineering management in developing schedules and specifications for new and legacy products.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Directs engineering and technical support personnel as required.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Performs other related duties as assigned.

Requirements:

- Degree / Masters in Engineering or requivalent

- 3 – 5 years of relevant experience

- Must possess relevant experience in Semicon Equipment Build

- Good working knowledge of electrical systems including motion, temperature measurement, PID loops, and safety interlock circuits.

- Experience working on dynamic electromechanical system design

- Proficient user of orcad, autocad, pcad, Solidworks or similar 3D CAD Software

- Design knowledge on NFPA, Semi Safety Requirements, and Machine safety.

- Good communication and interpersonal skills.

- Good command of written and verbal English

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, Design Verification

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

About the team:

MediaTek’s Physical design team is responsible to implement top quality digital backend design for our advanced process chips which have billions of transistors. Passionate talent who are eager to join this fast-growing IC design industry and grow together with our passionate team are welcome to apply!

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

Location: One North, Singapore

Important Note: This advertisement is meant to source suitable candidates for future openings for this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, RTL Design

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 5-8 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

RTL Lead Engineer

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 10-12 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Secretlab is endeavoring uncharted waters by exploring exciting new product categories. Our commitment to innovation and excellence has positioned us as a leader in our industry. As we continue to expand our product portfolio, we are seeking a talented and passionate project lead to join our dynamic team.

Position Overview:

The PCB Designer will spearhead the design and development of PCB’s. This pivotal role entails team leadership, ensuring projects align with quality benchmarks and deadlines.

Experience:

• 3+ years of experience in PCB design, with a proven track record of successfully designing and manufacturing complex PCBs.
• Experience with high-speed digital circuits, analog circuits, RF circuits, or power electronics is a plus.
• Strong experience with industry-standard PCB design tools (e.g., Altium Designer, Cadence, Eagle, or similar).
• Familiarity with design for manufacturability (DFM) and assembly (DFA) guidelines.

Skills:

• Proficiency in schematic capture, PCB layout, and routing techniques.
• Understanding of signal integrity, high-speed circuit design, and electromagnetic interference (EMI) mitigation.
• Experience with power distribution design, thermal management, and grounding techniques.
• Knowledge of PCB fabrication and assembly processes, including surface-mount technology (SMT) and through-hole components.
• Familiarity with component libraries, part creation, and footprint design.

Qualifications:

• Bachelors degree in electrical engineering, computer engineering or related field.
• 8+ years of progressive leadership experience in engineering teams with expertise in audio DSP engineering.

Job Description

• Industry/ Organization Type: Marine/ Oil & Gas
• Position Title: Design Engineer
• Working Location: Loyang (Transport provided)
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Up to $4,200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that engineering designs meet project-specific requirements, adhere to Engineering Standard Practices, and align with the company's ISO procedures, as well as national and international engineering norms, codes, and safety standards.
• Create essential documents and drawings, including block diagrams, bills of materials, functional design specifications, design calculations, wiring diagrams, and other necessary documentation. These ensure that equipment can be procured, integrated, tested, installed, and delivered to the customer on schedule.
• Verify that equipment provided for specific projects meets relevant specifications, complies with project technical standards, is correctly configured, and is fully completed.
• Ensure that the specified and designed equipment can be effectively integrated with other systems and equipment with which it interfaces.
• Develop test procedures suitable for project commissioning and provide technical support to the system assembly and integration team.
• Carry out other tasks as assigned by the Projects & Retrofit Manager or Assistant Manager.

APPLY NOW!!!

• At least a Diploma in IT or Engineering with minimum 2 years of related working experience.
• Proficient with AutoCAD and MS Office.
• Proficiency in one or more of the following systems:

1. LAN & IP Telephony: Experience in voice/data network design, implementation, and deployment; familiar with Juniper, Cisco, and HP Procurve switches and routers.
2. Radio Communication: Expertise in HF/VHF/UHF/Microwave/VSAT systems; capable of frequency interference analysis and radio coverage analysis; familiar with analogue/digital radio systems and trunked radio systems.
3. PAGA System: Experience in PAGA system design and sound coverage analysis simulation.
4. Security Systems (CCTV & Access Control): Experience with analogue/IP CCTV and access control systems; familiarity with Pelco, Bosch, Synetic, GE, LENEL, Bosch systems; PLC system experience is a plus.
5. Navigation Systems: Knowledge of Aeronautical VHF Radio, Meteorological Monitoring, Non-Directional Beacons, Marine Radar, GMDSS, Gyrocompass, and Navigation Aids.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68836 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641