Job Description:

To plan, coordinate and execute pre-commissioning and commissioning activities, prepare mechanical completion checklists and coordinate with the related activities for entirety of mechanical completion and realization of commissioning.

• Reviews technical specifications, drawings, procurement and contract specifications and other relevant documents.
• Prepares mechanical completion checklists and assign to QA/QC Inspectors for completion.
• Liaises with Commercial Team and Vendor Coordinator for mechanical completion and commissioning supports from vendors and sub-contractors.
• Monitors progress of mechanical completion for system readiness and assist mechanical completion work when necessary.
• Assist QA/QC Inspectors material verification check and incoming good receive when necessary.
• Liaises with Design Engineers for clarity of commissioning work scope.
• Assignment of System / Sub System Boundaries and check sheets for mechanical completion activities to facilitate site commissioning activities.
• Under study system design and plan for commissioning.
• Develop Instrument Loop folders and submit for owner's approval for site execution.
• Liaises with Design Engineers and vendors to develop commissioning procedures and submit for owner's approval.
• Liaises with owner, certifying authority, production and engineering departments on implementation and execution of commissioning procedures.
• Takes lead in commissioning preparation and work within discipline and support system commissioning of other disciplines.
• Provide commissioning assistance for vendors.
• Attend factory inspection, factory acceptance test and other related testing or compliance activities.
• Consolidates commissioning tests data and result for handover to owner.
• Ensure the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations.
• Ensure that Health, Safety & Environmental operating procedures are followed and counsel employees about compliance as necessary.
• Participate in the preparation of Safe work, Environmental control and Emergency procedures.
• Ensure that all Health, Safety, Environmental & Quality (HSEQ) plans are followed.
• Ensure that all Commissioning Permit To Work Procedure (CPTW) are followed.
• Any other associated tasks and responsibilities assigned from time to time.
• Need to know about specifications, classification standards and computer literate. Able to utilize measuring instruments and understand measuring requirement and practice. Understand precedence and interfaces of vessel system.

Requirements:

• Degree in Electrical/Instrumentation/Process/Electronics Engineering with 5 years' experience in marine industry or Diploma in Electrical/Instrumentation/Process/Electronics Engineering with 8 years' experience.
• At least 5 to 8 years' experience in marine industry and familiar with various classifications codes, Norsok, IEC specification etc and be familiar with Mechanical Completion and Commissioning Procedures.
• Be prepared to work on weekends, night shifts and go for sea trials, factory acceptance test and factory inspection.
• Technical knowledge for working on low and high voltage apparatus, electrical
• Installation/distribution/generation system, electrical system safety/code and regulations such as NMD, Lloyds, IEC etc. Practical experience on marine systems start-up and troubleshooting
• Technical knowledge for FGS / ICSS / DCS / PLC systems, Cause and Effects (C&E) and field instrumentation.
• Practical experience on marine systems start-up and troubleshooting
• Initiative, analytical, responsible, leadership, spontaneous, good communication skills and result oriented.
• Must be physically fit.

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Responsibilities

• Provide hardware/software break-fix support for business-critical systems across various industries, including Hospitality, Healthcare, Government, and Financial sectors.

• Troubleshoot and resolve network issues reported by managed service agents, identifying root causes and implementing timely solutions.

• Lead and deliver Tech-Refresh projects, ensuring timely completion.

• Mentor and provide guidance to junior team members.

• Participate in a 24/7 rotational standby duty for P1/P2 escalations after office hours, including weekends and public holidays.

• Design and implement new network solutions and/or optimize the efficiency of current networks.

• Monitor, troubleshoot, and maximize network performance through ongoing maintenance and optimization.

• Deliver Client Success key account services, including change requests, preventative maintenance, and standby support.

• Perform network maintenance and system upgrades including certificate updates, patches, hot fixes and security configurations.

• Performing Risk Assessment and bug scrub reviews on reported security network vulnerabilities from vendor products.

• Report network status and performance to key stakeholders.

Requirements

• Minimum of 4 years of relevant experience in network support operations for large-scale network infrastructure.

• Strong knowledge of network technologies, including routing, switching, firewalls, FTTH access networks, SASE, and SD-WAN.

• Proficient in configuring firewalls, routing&switching and wireless network to maximize network efficiency and security.

• Proven expertise in core switching and routing (CCIE certification preferred).

• Hands-on experience with Firewall/Security technologies (Palo Alto, Fortinet, Cisco, SASE, SD-WAN).

• Practical experience with Huawei NCE Campus/Fabric solutions.(HCIE or HCIP preferred)

• Good project management, configuration, troubleshooting skills

• Good customer interaction, written and oral communication skills

• Ability to work with all levels, and ability to work and contribute in a team or individually

Licence no: 12C6060

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

About the Company:

The company started with civil engineering contracts and progressively expanded into addition and alteration, demolition, civil engineering, and general building works. The company has vast experience in construction of driving circuit for heavy vehicles, drainage and sewerage works, pipe laying and roadworks, as well as general building for both public and private projects.

Responsibilities:

• Assist the Project Manager in overseeing the complete lifecycle of projects, including planning, coordination, execution, and control.
• Assist in building and guiding project teams, providing direction, and support to achieve project goals.
• Assign tasks and responsibilities to team members, ensuring effective resource allocation.
• Develop and maintain project timelines and regularly monitor progress.
• Assist in generating reports that outline project status, issues, and proposed solutions.
• Address conflicts and resolve issues within the project team.
• Analyze and troubleshoot problem areas, adjusting strategies as required.
• Mentor and motivate team members, fostering a positive and accountable work environment.
• Undertake additional tasks and assignments as they arise.

Requirements:

• Hold a Diploma/Degree in Civil Engineering.
• Possess a minimum of 2 years of experience in the civil engineering industry.
• Candidate without experience is welcomed to apply.
• Exhibit strong communication skills.
• Have relevant on-site experience.
• Capable of writing and understanding engineering reports.
• Possess excellent problem-solving abilities.
• Can work effectively under pressure and take initiative.

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

Proposal Engineer
Working day: Monday - Friday (8am - 5.45pm)
Salary: $3,000 - $6,000
Office Location: Woodlands

Duties & Responsibilities:

Cost Estimation:

• Prepare detailed cost estimates for MEP (Mechanical, Electrical, Plumbing) projects;
• Analyze and evaluate project specifications and drawings to determine the scope of work and associated costs;

Quantity Take-off

• Perform quantity take-offs for materials and labour required for MEP installations;
• Collaborate with project teams to ensure accurate and comprehensive quantity assessments;

Budgeting and Cost-control

• Develop and manage project budgets, ensuring cost control throughout the project lifecycle;
• Monitor and report on cost variations, providing recommendations for cost-saving measures;

Tendering and Procurement

• Assist in the preparation of tender documents and participate in the procurement process;
• Evaluate subcontractor and supplier bids, ensuring competitiveness and adherence to project requirements;

Contract Administration

• Administer and manage contracts related to MEP works, including variations and claims;
• Monitor contractual compliance and resolve any disputes that may arise during the project;

Value Engineering

• Identify opportunities for value engineering to optimize project costs without compromising quality;
• Work closely with design and construction teams to implement value engineering recommendations;

Risk Management

• Identify and assess potential risks related to cost and contract issues;
• Develop strategies to mitigate risks and ensure project success;

Cost Reporting

• Generate regular cost reports to keep stakeholders informed of project financial status;
• Provide analysis and recommendations based on cost reporting data;

Collaboration

• Collaborate with architects, engineers, contractors, and other project stakeholders;
• Participate in project meetings and contribute to the overall success of the project;

Regulatory Compliance

• Ensure compliance with relevant regulations and standards in MEP construction;
• Stay updated on industry trends, codes, and best practices;

Ad-Hoc

• Undertake cost analysis for repair and maintenance project work;
• Other Ad-hoc duties as assigned by the HOD.

Qualifications & Experience:

• Degree / Diploma in Quantity Surveying / Engineering or equivalent from a recognized University.
• Minimum 5 years of related working experiences in industrial, commercial or data-centre projects.
• Good working knowledge in Mechanical and Electrical.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Highlight:

• Japan MNC
• Permanent job opportunity
• 5 days work week, normal office working hour
• Great remuneration & benefits
• Great career progression
• Location: Jurong Island (Company transport pickup @ Jurong East)

Responsibilities

• Responding to and resolving Customer and internal stakeholder technical requests concerning relevant operation and maintenance matters of the GTCC Power Plant, making use of product technical knowledge, mechanical know-how of system components, and analytical skills while adhering to sound engineering principles, standards, practices and procedures.
• Communicating with and supporting the Customer to act on Technical Information notices to improve or upgrade the plant.
• Proactively identifying potential failures, assessing and controlling operational risks on the Power Train with support from the 24/7 remote monitoring hub and expert support
• Proactively advising and assisting the Customer in planning, coordination with MPW for the execution of relevant inspection and maintenance activities.
• Analyzing, tracking and reporting monthly Reliability, Availability, and Maintainability (RAM) data and relevant KPIs for the LTSA, for the purposes of invoicing and for monitoring performance against the contractual guarantees and obligations. If necessary, recommend corrective actions.
• Reviewing and presenting the monthly monitoring diagnostic reports to the Customer.
• Reviewing and presenting the inspection findings and outage reports to the Customer.

Requirements:

• Previous site work experience in Long Term Service Agreements, plant commissioning, field service, and/or maintenance and overhaul of GTCC power plants or industrial plants rotating equipment is preferable.
• Previous customer facing experience where there is regular interaction with plant personnel to provide troubleshooting support and to resolve problems.
• Technical knowledge in GTCC operations and maintenance.

HOW TO APPLY:

Interested applicants, please send your latest resume to [email protected] or click on “Apply Now” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Dick Sern (Dick Sern)

EA Personnel Reg No: R22106832

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a QA Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Job Description & Requirements

Responsibilities:

· Develop and implement test strategies, test plans, test cases, and test scripts for .NET applications.

· Design and execute automated tests using frameworks such as Unit, xUnit.net, or SpecFlow.

· Perform manual testing as necessary, including functional, integration, regression, and performance testing.

· Identify, record, document, and track bugs to resolution using tools like Azure DevOps, JIRA, or similar.

· Participate in code reviews and provide feedback on code quality from a testing perspective.

Requirements:

· Experience with testing frameworks and tools such as NUnit, xUnit.net, SpecFlow, Selenium WebDriver, Apache JMeter or similar.

· Familiarity with API testing tools like Postman, Swagger.

· Knowledge of database testing techniques and ability to write SQL queries for data validation.

· Excellent problem-solving skills and strong communication skills.

Qualifications:

· Bachelor’s degree in Computer Science, Engineering, or a related field.

· Proven experience as automatic test engineer or similar role

Position Title: Jewellery Design

Location: Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,300

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

Formal training in Jewellery Design

• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Singapore Based (Ang Mo Kio)

5 Days work per week (Mon – Fri 8.30am – 6pm)

$6000 to $9500

Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services. + Good knowledge in M&E works, planning capability and authorities / statutory compliance.

Minimum 8-10 years’ experience in Mechanical & Electrical services. + Good knowledge and experienced in Design & Build Tender for M&E services is preferred

Career Progression Opportunities

Job scope

Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.

Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.

Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.

Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.

Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.

Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.

Plan and execute with tender team to achieve KPI.

Suggest Value Engineering solution for MEP works, if required, in the tender.

Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.

Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.

Provide technical expertise and guidance to support the decision-making process during tender evaluations.

Evaluating quotations from sub-cons/suppliers according to tender requirement.

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

Senior Marketing & Communication Executive

Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
Working Hours: 8.15am - 5.45pm
Working Days: 5 Days [Monday - Friday]
Salary: $3,000 to $3,500

Responsibilities

• Attend to customer enquiries through various channels such as email, phone and in person.
• Design and/or edit marketing collaterals (brochure, leaflets etc)
• Oversee library of self-produced and principal supplied brochure, video resources and other Marketing and Sales support materials.
• Conceptualise, plan and execute marketing campaigns; both online and offline
• Handle all activities related to organisation of events (training, product seminars, roadshows, exhibitions – event budget, liaising with vendors, handling, registration, managing exhibition booths etc)
• Maintain website and work with vendor.
• Social media management, review and assist to maximise brand experience and engagement.
• Explore opportunities with different e-commence platforms and partners for collaboration.
• Execution of content creation (videography, photography) and produce product videos.
• Prepare and update price list.
• Any other ad-hoc duties assigned.

Requirements:

• Bachelor’s degree in marketing, Digital Marketing, or related field
• At least 2 years of relevant working experience
• Experience in digital marketing and social media management.
• Knowledge of graphic design software (e.g., Adobe Creative Suite)
• Familiarity with marketing analytics tools (e.g., Google Analytics)

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Job Responsibilities:

• Manage assigned projects to ensure quality and on-time execution to the project’s specifications and client’s expectations.
• Manage sub-contractors and suppliers to ensure quality and on-time delivery within project costs.
• Prepare project schedule/timeline and manage deadlines for the delivery of projects on time.
• Conduct project meetings as and when required, eg. for issues resolution and updates.
• Facilitate change requests to ensure that all parties are informed and manage any impact on schedule and budget.
• Managing client’s expectations during the project transition period.
• Oversee onsite setup work to check on quality delivery, safe work procedures and on-time completion, when required.
• Apply Permit To Work with supporting WSH documentation (Risk Assessment, Methods Statement, Safe Work Procedures) and any project-related admin work when required.
• Source for sub-contractors, suppliers and production material, when required.

Job Requirements:

• With 2 - 4 of working experience in managing interior fit out project in commercial office design & build
• Excellent communication skills
• Dynamic and comfortable working in a fast-paced environment.
• Comfortable in running a few projects in parallel (depending on the size of projects).

Location: Paragon, Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,500

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

Formal training in Jewellery Design

• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

Chin See Min Reg No. : R22107450

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Job Description & Requirements

· Manage and monitor all installed systems and infrastructure

· Install, configure, test and maintain operating systems, application software and system management tools

· Proactively ensure the highest levels of systems and infrastructure availability

· Monitor and test application performance for potential bottlenecks, identify possible solutions, and work with developers to implement those fixes

· Maintain security, backup, and redundancy strategies

· Write and maintain custom scripts to increase system efficiency and lower the human intervention time on any tasks

· Participate in the design of information and operational support systems

· Provide 2nd and 3rd level support

· Liaise with vendors and other IT personnel for problem resolution

Requirements and skills

· BS/MS degree in Computer Science, Engineering or a related subject

· Proven working experience in installing, configuring and troubleshooting UNIX /Linux based environments.

· Solid experience in the administration and performance tuning of application stacks (e.g.,Tomcat, JBoss, Apache, Ruby, NGINX)

· Solid Cloud experience, preferably in AWS

· Experience with virtualization and containerization (e.g., VMware, Virtual Box)

· Experience with monitoring systems

· Experience with automation software (e.g., Puppet, cfengine, Chef)

· Solid scripting skills (e.g., shell scripts, Perl, Ruby, Python)

· Solid networking knowledge (OSI network layers, TCP/IP)

Job Duties & Responsibilities

• Research and analyze the project requirement, design the test case and develop test solution

• Take ownership of leading the quality of an assigned project and its features.

• Coordinate the execution of automated tests with a project’s testing cadence.

• Functional/ Regression testing verification.

• API and backend testing.

• Data analytics testing.

• UI and UX analysis and testing.

• Communicate with stakeholders and teammates of testing status and results.

• Contribute to collaboration with test automation team to continuously expand test coverage.

• Contribute to test case prioritization for manual and automated testing prioritization.

• Contribute to optimizing test case prioritization to increase testing velocity.

• Contribute to organisation’s Global QA improvement and project team’s quality process.

• Should have worked on Automation Tests for desktop based application

Job Requirements:

• Minimum Bachelor or Master Degree in IT/Computer Science or similar study background with 5 or more years of experience as a Software Developer Engineer in Testing (SDET)

• Good Knowledge of programming languages like Java, JavaScript and HTML

• Good to have knowledge on Banking or Finance.

• Expertise in automation testing tools like Selenium, Rest Assured , Cypress and Cucumber

• Expertise in BDD, Data Driven, Hybrid Test Automation Framework

• Hands on knowledge of desktop based app and its automation

• Able to adapt to changing business and project priorities.

• Proactive in bringing solutions to observed gaps in requirements and process.

• Proactive in test planning; able to identify and breakout tasks based on a test plan.

• Able to prioritize and execute QA tasks with minimal supervision.

• Execute tasks from QA lead or above.

• Mentor and guide junior level Associate QA Engineers and QA Engineers.

• Perform root cause analysis.

• Install and/or configure tests for systems.

• Optimize test cases for higher efficiency, especially for specific changes in code or features.

• Test client-server interaction.

• Test user behavior analytics.

• Analyze and test UI and UX requirements.

• JIRA and Confluence

Nice To Have Experience:

• Automation test result analysis and investigation of failures.

• Perform change impact analysis.

• Perform risk-based test analysis.

• Bonus skills and tools knowledge:

· GitHub and Bitbucket

· Docker

· Postman

· Jenkins CI

· JavaScript, Node.js & Selenium WebDriverIO

· Kubernetes

· Xray test case management tools

· AWS Cloud.

Interested applicants please send your resume in MS Word format and attention it to Joanna Tan (R1104661).

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

Business Registration Number: 200611680D. Licence Number: 10C5117

Job Responsibilities:

· Sell company capabilities to Semiconductors (Front-End) & general industries

· Maintain relationships by frequent visits/contacts and seek new opportunities with existing accounts

· Create new customer accounts

· Handle other aspects of sales/marketing functions including quotations, sales reports and forecasts, market feedback and planning.

· Follow up on billings and invoices

· Review quotations and cost estimates and strategizing to ensure bids are comprehensively estimated and submitted as per client’s tender requirements

· Identify, assess and manage risks relating to the contracts which could impact the bottom line

· Able to travel (SEA regions) when required

Requirements:

· Minimum diploma, preferably Mechanical Engineering background

· At least 3 years relevant experience in Semiconductors Industries

· Strong contact base with Semiconductors Industries

· Handles Mandarin speaking customers

· Self-driven, passionate and motivated to excel expectations

· Good written, verbal communication and interpersonal skills

· Must possess own vehicle

IT ENGINEER

(Salary – $3,500 to $4,500)

Location

• Bishan| Bright Hill TE7

Duty and Responsiblity

• Understand business operations and security requirements, and implement IT infrastructure and cloud solutions including IT security with best practices
• Support networking and server operational level including IT virtualization, storage and backup solutions, well as IT security (e.g. cybersecurity), MFA, business continuity, disaster recovery and information risk management.
• Manage IT endpoint security operations to ensure high level of reliability, security, maintainability and resiliency
• Plan, schedule, execute and monitor IT project(s) as assigned
• Assist with the department’s annual audits and budget planning
• Assist in updating and maintaining IT risk assessment, IT policies, IT processes & hardening guides as part of library documentation
• Manage vendor service on the preventive maintenance and service support within the stipulated timeline
• Monitor the existing IT services to ensure timely service or renewal
• Assist with end-user request in areas of IT aspects

Working Hours

• 5 Day Work Week – 8hrs a day
• Able to work on weekends, public holidays and irregular working hours

Job Requirements

• Qualification: Bachelor’s degree in Information technology/Computer science or related and equivalent qualification
• Year(s) of Experience: At least 4 years of experience in IT infrastructure support including cloud computing technologies such as Azure, AWS platform and IT project management. Strong knowledge and hands-on experience in networking protocol, routing, switches including troubleshooting network level issues.
• Language(s): Bilingual in English and Mandarin to liaise with English or Mandarin-speaking associates
• Required Knowledge/Skill(s): IT Security management, IT Infrastructure and Cloud computing services and compliance, Microsoft 365, Active Directory, DNS/DHCP, VMware, Google workplace, Good communication and interpersonal skills
• Team player with proactive working attitude

Interested candidates, please send in your CV to [email protected]

• Devising and implementing methods and procedures for inspecting, testing and evaluating the
  precision and accuracy of products and production equipment.
• Designing and analyzing inspection and testing processes, mechanisms, and equipment.
• Conducting quality assurance tests and performing statistical analysis to assess the level of
  control and manage product quality risks.
• Undertaking root cause analysis of incidents requiring corrective action.
• Ensures that corrective measures and deviation meet acceptable reliability standards and that
  documentation is compliant with requirements An Experienced Professional (P2) applies practical
  knowledge of job area typically obtained through advanced education and work experience.

· Good knowledge of engines especially slow speed engines which is a must; experience with medium, high speed diesel and gas engine would be an advantage.

· Possesses good leadership attributes, able to lead a team of technicians to achieve given task.

· Independently to perform inspection, installation (incl. engine alignment), repair, upgrading, troubleshooting and overhaul of diesel engines and auxiliary equipment.

· Ability to communicate with customer/ship owner reps/Class/sub-contractor including arrangement of work/entry permit through email and phone.

· Be prepared to travel extensively.

· Able to prepare a hand-written work done, with data recorded as per format templates and service report with photos, upon completion of job.

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

Responsiblities :

1) To manage and coordinate site steel structural Work.

2) Oversee operation on a day to day basis.

3) Ensure the works are done in safety, on time and within budget.

4) Mediate on site conflicts.

5) willingness to work a flexible schedules.

Qualifications :

1) Degree in Structural Engineering.

2) 3-5 years experience in a construction environment.

3) Budget Management experience require.

4) Valid class 3 Singapore driving licence.

Job Responsibilities

• Supervise and manage on-site construction activities, ensuring adherence to the design and specifications.
• Liaise with project managers, subcontractors, and consultants to resolve site issues.
• Conduct site inspections to ensure work quality, safety compliance, and project standards.
• Interpret and implement technical drawings and design plans on-site.
• Monitor the use of materials and resources to ensure cost-efficiency.
• Prepare daily progress reports and documentation for the project management team.
• Ensure the implementation of safety protocols and monitor worker safety.
• Provide technical advice and support to construction teams as needed.

Job Requirements:

• Bachelor’s degree in Civil Engineering, Construction Engineering, or a related field.
• 2–4 years of experience in site supervision or engineering roles within the construction industry.
• Previous experience managing construction projects or working on-site is essential.

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage