DUTIES AND RESPONSIBILITIES:

• Experience in Mechanical, Chemical, Gas and etc.
• Reviewing and management of all design documentation for Mechanical system, Chemical & Gas system and Control system.
• Plan and implement Project Management Control
• Able to understand construction shop drawing
• Familiar design calculation with Mechanical (HVAC, Process System and Others)
• Assist Project Manager to plan, and project execution
• Assist Project Manager to determine project budget, project schedule, and scope of work and deploy appropriate staff
• Manages and monitors site progress in project
• Collates analysis drawings, plans, specifications and other documents relating to construction project
• Identifies risks, review and advise in the risk-impact assessments and manages compliance to risk-impact management
• Direct, lead and support other project team in managing and executing multiple tasks and project
• Manages no inn-conformances, corrective and preventive actions process and ensures follow-up within stipulated timelines
• Experience on conducting, inspect and witness of welding & welder qualifications test mechanical test, materials receiving, and NDT testing.
• Able to verify of material requisition and taking-off quantities, site measurement.
• Able to prepare progress payment claim, variation orders and others.
• Develop project reports on a timely basis
• Maintain, manage and document all project reports and statements
• Other related duties, as assigned

Job Info:

• Monday to Friday 830 - 630
• Location: Tai Seng

Responsibilities:

• Assist Quality and Validation Manager Asia to complete the tasks in time with good quality.
• Responsible for successful execution the Validation functions for customer project, as required – Quality, Cost, Time.
• Responsible to drive and support project team for projects where validation is required and ensure execution is compliance to Mikron standards.
• Provides training on qualification activities
• Responsible for maintaining qualification documentation standards and procedures.
• Create and maintain qualification/validation documentation from the design phase of projects for mechanical, software, and hardware parts.
• Lead the qualification/validation activities of projects (risk analysis, protocol drafting, and test execution during FAT/SAT) internally and at our partners' sites (approximately 20% of the time on travel throughout the year).

Requirements:

• Minimum 2 years of work experience in quality or validation of automated systems (mechanical, software, and hardware) or equivalent.
• Work experience in control systems design (design or programming coding) will be an advantage.
• Computer skills including Intermediate to advanced working knowledge of MS Excel/Word/PowerPoint with demonstrated record of spreadsheet creation and maintenance.
• Excellent understanding of shop practices in assembly, test & debug and final acceptance
• Strong Microsoft Excel skills

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

EA License No: 24C2352
EA Personnel No: R24123724
EA Personnel Name: Tiffany Ng Xin Yi

Key Responsibilities:

1. Asset Management: Maintain an accurate and up-to-date inventory of all data center assets, including servers, storage devices, networking equipment, and peripheral devices.
   Track asset lifecycle from acquisition to decommissioning, ensuring all assets are recorded in asset management tools.
   Perform regular audits of assets and ensure alignment with data center operational requirements and security policies.
   
2. Inventory Control:Manage inventory levels to support current and future data center hardware needs, reducing downtime risk due to hardware shortages.
   Conduct periodic physical inventory counts, reconcile inventory discrepancies, and update asset records accordingly.
   Forecast hardware needs based on data center growth projections and ensure appropriate inventory stock levels.
   
3. Vendor and Procurement Management:Coordinate with vendors for asset procurement, delivery schedules, and service agreements.
   Manage vendor relationships, negotiate pricing, and track contract compliance for hardware-related services.
   Monitor warranty periods, maintenance agreements, and RMA (Return Merchandise Authorization) processes, ensuring assets remain under coverage where applicable.
   
4. Asset Optimization & Cost Control:Identify opportunities for optimizing hardware usage and reallocating resources to maximize data center efficiency.
   Implement asset tracking systems to reduce asset loss, improve utilization, and manage inventory costs effectively.
   Analyze and report on cost trends, working with procurement to recommend cost-saving strategies and identify preferred vendors.
   
5. Documentation & Reporting:Ensure comprehensive documentation of asset management processes, including policies, SOPs, and asset movement protocols.
   Generate regular reports detailing asset status, inventory metrics, vendor performance, and budget adherence.
   Develop and present monthly or quarterly reports on asset lifecycle status, replacement schedules, and inventory forecasts.
   
6. Compliance and Security:Maintain asset and inventory management in accordance with data center policies, regulatory standards, and security requirements.
   Oversee access controls related to high-value inventory, ensuring only authorized personnel have access to asset storage areas.
   Support internal and external audits by providing detailed asset records and demonstrating compliance with inventory policies.
   

Qualifications:

• Education: Bachelor’s degree in Supply Chain Management, Information Technology, Business Administration, or related field.
• Experience: 1-2 years of experience in asset management, inventory control, or data center operations.
• Certifications: IT Asset Management (ITAM) or Certified Asset Management Professional (CAMP) certifications (preferred).

Skills:

• Asset & Inventory Management Expertise: Proficient in asset tracking tools, asset lifecycle management, and best practices in inventory control.
• Vendor Relations: Skilled at managing vendor relationships, negotiating contracts, and ensuring adherence to service agreements.
• Data Analysis: Ability to analyze asset utilization, costs, and trends to make data-driven recommendations for inventory control.
• Organizational Skills: Excellent attention to detail and organizational skills to manage large inventories and track multiple assets.
• Documentation and Reporting: Strong reporting skills to maintain accurate records and communicate asset status to management.
• Communication: Effective communicator for collaborating with data center teams, procurement, and vendors.

Job Responsibilities:

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.
• Assist in Coordination and execution relating to the construction project.
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Assistants in monitoring projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors & foremen meet clients’ regulatory work requirements.
• To check and ensure compliance with TOP checklist
• Responsible for all inspection activities being carried out.
• Other ad hoc projects assigned

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 1-2 years relevant experience (open to entry level)
• Proficient in MS Office, AutoCAD, and BIM
• A team player and with a positive working attitude

We’re searching for a Network Engineer to be part of our diverse team of talent here at NCS!

If you believe in going above and beyond, want to exemplify the best, and wish to bring people and technology together like never before, then we would love to have a conversation with you!

What will you do?

• Responsible for the infrastructure network design, implementation, testing, security, managing and maintenance of proposed system
• Work closely with Team Leader to meet system delivery milestone
• Provide technical documentation support to Project & Solutions Teams, as well as hand over as-built system documentation to Maintenance support team
• Engage with back-line support and/or with vendor’s support to diagnose and rectify technical problems.
• Assist in day-to-day operation of the System Delivery team
• Carry out other technical related duties that may be required.

The ideal candidate should possess:

• Minimum 3-5 years of experience in configuring and administering routers and switches (e.g. Cisco routers and switches, etc), firewall products (e.g. CheckPoint, Forcepoint, etc.), F5 Load Balancers, AAA, NTP, IPS
• Good understanding of network system, network architecture, routing, switching, firewall and security
• Good interpersonal and communication skills to interact effectively at all levels
• Proficient in performing network analysis and troubleshooting using network and protocol analyzers
• Bachelor’s degree or higher in Computer Science/Information Technology/Engineering or relevant field with network certification in CCNA/CCNP/CCIE

What you might also need to have:

• Senior/Lead Network engineer will be required to lead a team network engineers
• Able to work on 24 x 7 standby support and/or Shift work schedule when required

Job Description:

• Responsible to configure, setup, design process sequences, troubleshoot, and fine-tune processes on projects using FASA applications or help to develop them.
• Responsible for carry-out machine on-site setup and buy-off process.
• Act as a lead for core efforts such as setup, troubleshooting, and buy-off project using established procedures.
• Contribute to documentation.

Job Requirements:

• Experience in semiconductor process and engineering knowledge with a demonstrated understanding of troubleshooting at a high level.
• Experience as a team or project lead.
• Advance understanding of software configuration, machine system architecture, maintenance, repair and debug.
• Intermediate level of Omron PLC, Mitsubishi PLC, Siemens PLC, Allen-Bradley PLC, and Keyence PLC systems, including installation, setup, systems administration, troubleshooting, and fine-tune.
• Intermediate level with one or more general-purpose programming languages including but not limited to: Ladder Diagrams, Functional Block Diagram, Structured Text, and Statement List.
• Knowing how to communicate between PLCs and with other devices by RS232/TCPIP/Modbus/
• Effective interpersonal and communication skills, with the ability to interact appropriately with users of various technical-skilled levels and to remain professional while working to resolve problems.

• Developing detailed designs.
• Doing feasibility assessments and site inspections.
• Preparing and implementing project plans.
• Researching and providing estimates for projects.
• Reviewing government regulations and ordinances.
• Monitoring and optimizing safety procedures, production processes, and regulatory compliance.
• Making recommendations or presenting alternative solutions to problems.
• Confidently liaising with clients and other professional subcontractors.
• Project management duties (e.g. managing budgets, resources, and deadlines; acquiring and compiling quotes, etc.).

Production Engineer

Our client is a MNC chemical manufacturer company. They are currently seeking for Production Engineer to improve the production technology of the site.

The role of the Production Engineer includes:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint.
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization.
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.

Job Requirement:

·       Bachelor’s degree in science, technology, or engineering.

·       Minimum five (5) years of relevant engineering/production work experience in chemical industry.

·       Experience in designing or optimizing the process control system of chemical plants.

·       Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).

·       Knowledge of mass and heat balance calculations of chemical plants.

·       Demonstrated skill to in leadership, developing others, and working in a teambased environment.

·       Outstanding verbal and written communication, presentation, interpersonal, creative thinking, consulting, and analytical skills.

·       Excellent communication skills.

·       Ability to prioritize work to manage multiple projects to meet deadlines.

·       Excellent problem-solving/decision-making skills.

·       Ability to multi-task.

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly send in your latest job resume without your NRIC numbers and other ID numbers.

For job resume(s) that contain NRIC numbers and/ or ID details, it may not be processed and your job application may be rejected due to improper submission of job application details. Please refer to the advisory guidelines on the PDPA for NRIC numbers and other ID numbers.

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

Electrical Engineer (Satellite, Radio Frequency)/ Geotechnical Engineer

The Electrical Engineer is required to attend to pre-sale electrical matters and provide suggestions on project specification and give calculation on the amount of electricity consumption.

Responsibilities:

• To conduct and lead design reviews for Radio Frequency/ Satellite, Network communication systems.
• Responsible for SATCOM/Micro Wave system and network configurations, acceptance, interface and performance testing and commissioning of SATCOM/Microwave systems.
• Understand contractual and project requirements and specifications, propose and generate (SATCOM/MW) system architecture and designs.

Requirements:

• Good in handling Electrical Engineering skills and provide calculation on electricity consumption.
• Ability to calculate on the amount of Electricity required.
• Expert in electrical engineering.
• Good in handling Single diagram and sizing; SLD
• Responsible in handling Electrical Input and output of the equipment and Sizing of electrical equipment
• Good in handling Modulators and Voltage regulator
• Experience in handling Low noise amplifier and Electrical wiring.
• Good in handling Electricity Calculation, Drawing, Design and management of electrical specification with cost and time line.
• Strong knowledge of Radio Frequency, Microwave, Satellite (Satcom) and Microwave.
• Diploma/Degree in Electronics/Electrical Communication Engineering.
• Experience in handling Radio Frequency/ Satellite and Network.
• Proficient in operating RF and electronics test and measuring equipment such as signal generator and spectrum analyzer
• Experience in Satellite/Microwave Communications and Network is an added advantage.

We respect your privacy and all communication will be treated with confidentiality.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with your updated resume in MS Words format to : [email protected]

*Only shortlisted candidate will be notified.

Lee Kelvin No. R1872625

STAR CAREER CONSULTING PTE. LTD (EA License: 20C0353)

JOB DESCRIPTION

We are looking for a strong candidate with strong AI background and experiences in audio, speech AI training for industrial projects on audio & speech recognitions.

Key Responsibilities: Work on audio processing, data preparation and multiple model training of multi-language code-switch ASR for projects.

JOB REQUIREMENT

• Has a related B.S degree in Computer Science or Software Engineering.
• Experiences in speech signal processing, speech recognition, in both hybrid models, supervised E2E models, LLMs fine-tuned models and deep learning
• Strong in the following programming languages: Python, Pytorch, C/C++, Linux Bash/Shell
• Knowledge in web-based and app developments for demo systems is advantageous

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

We are looking for a strong candidate with strong AI background and experiences in audio, speech AI training for industrial projects on audio & speech recognitions.

Key Responsibilities: Work on audio processing, data preparation and multiple model training of multi-language code-switch ASR for projects.

JOB REQUIREMENT

• Has a related B.S degree in Computer Science or Software Engineering with min 5 years of relevant experience
• Experiences in speech signal processing, speech recognition, in both hybrid models, supervised E2E models, LLMs fine-tuned models and deep learning
• Strong in the following programming languages: Python, Pytorch, C/C++, Linux Bash/Shell
• Knowledge in web-based and app developments for demo systems is advantageous

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interior Designer Assistant

• Working Hours: 5.5 Days [10am - 6pm / 10am - 2pm]
• $3000 - $4500
• Location: Near MacPherson MRT

Requirements

• Minimum 3-4 years of relevant experiences
• Familiar with AutoCAD

Job Description
To assist Design director in:

1. Propose layout plan

2. Select material

3. Prepare quotation

4. Autocad drawings for layout, lighting & ceiling plan, carpentry details etc

5. Meeting client for discussion on design and proposal

6. Prepare moodboard & do presentation to client

7. Site meeting occasionally

8. Purchasing order for materials/items related to project

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

· Planning, coordination, and execution of substation automation projects.

· Design, costing and integration of substation automation systems according to project requirements.

· Installation, testing and troubleshooting of substation automation systems at site.

· Preparation of project documents and drawings.

Requirements:

· Diploma in Electrical Engineering/Computer Engineering

· Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

We are seeking a highly skilled and experienced Assistant Chief Engineer to join our dynamic team in Singapore. In this crucial role, you will work closely with the Chief Engineer to oversee and manage all technical operations related to our facilities, ensuring optimal performance, efficiency, and guest satisfaction.

• Assist in managing the day-to-day operations of the engineering department, including maintenance, repairs, and upgrades of all building systems and equipment
• Develop and implement preventive maintenance programs to ensure the longevity and efficiency of all facilities and equipment
• Collaborate with other departments to address technical issues and improve overall operational efficiency
• Oversee and coordinate the work of engineering staff and external contractors
• Assist in preparing and managing departmental budgets, including forecasting and cost control measures
• Ensure compliance with all relevant safety regulations, building codes, and environmental standards
• Implement energy-saving initiatives and sustainable practices to reduce environmental impact and operational costs
• Participate in emergency response planning and execution, including fire safety and natural disaster preparedness
• Contribute to long-term strategic planning for facility improvements and upgrades
• Provide technical guidance and training to engineering staff to enhance their skills and knowledge
• Assist in the selection and procurement of equipment, tools, and supplies for the engineering department

Key Responsibilities:

• Develop both backend and frontend software using Python, SQL, REST, JavaScript, and TypeScript with the Node.js and React framework.
• Write clean, efficient, and maintainable code, adhering to software engineering best practices.
• Utilize DevSecOps tools for code deployment and version control.
• Deploy solutions in cloud environments with CI/CD integration.
• Deliver enterprise AI projects, products, and platforms, focusing on scalability and reusability.
• Conduct technical pilots and feasibility studies to explore new opportunities, transitioning successful pilots into scalable production implementations.
• Develop integrations with other applications and services.
• Create unit tests for both positive and negative test cases.
• Provide support for application releases and second-level troubleshooting.
• Stay updated with the latest advancements in software engineering and technology.
• Participate in Agile ceremonies to contribute to prioritized projects and features.
• Collaborate closely with cross-functional teams, including product managers, data scientists, and software engineers, to understand requirements and deliver AI-driven solutions.

Requirements:

• 2+ years of hands-on experience in software design and coding, building robust and scalable solutions using Python, SQL, REST, JavaScript, and TypeScript (Node.js + React framework).
• Experience developing data-intensive applications using modern technology stacks, including cloud services (AWS, Azure), data pipelines, and SQL/NoSQL databases (experience with graph databases is a plus).
• Expertise in designing, architecting, and maintaining applications.
• Proficiency in building and consuming web-based APIs.
• Familiarity with CI/CD environments, test-driven development, and version control systems.
• Strong collaboration and communication skills for cross-functional team engagement.
• Experience in unit testing and a variety of testing strategies, including performance testing.
• Good understanding of system integration patterns.

Preferred:

• Experience working within Agile methodologies.
• Knowledge in areas related to artificial intelligence, machine learning, and data science.
• Familiarity with Generative AI solutions and applications.
• Experience working with AWS Cloud.
• Proficiency in building, deploying, and managing Docker images.

Education:

• Candidates are evaluated on a case-by-case basis, with preferred qualifications in quantitative, scientific, or technology disciplines such as Mathematics, Statistics, Computer Science, Data Science, Analytics, Physics.

Interested candidates who wish to apply for the advertised position, please clock on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

• 5 days, Alexandra (South-West), walking distance from MRT
• $4200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Suppor current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time
• studies

Interested applicants, please send your resume to [email protected]

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

Our client is a well-established MNC, market leader in the IT industry. Due to their current expansion plan, they are looking for an Information Security Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Handle post-sales activities of related products and solutions.
• Engage in the implementation of large-scale projects.
• Offer on-site services, including deployment, testing and preparation of documentation.
• Provide technical assistance to maintain high levels of customer satisfaction.
• Troubleshoot customer inquiries by leveraging existing knowledgebase resources and resolving known issues.
• Be available for standby support to manage 24/7 maintenance calls.
• All other adhoc duties as assigned.

Requirements:

• Minimum diploma in IT / Cybersecurity or other related field of studies.
• Minimum 2 years’ IT support experience.
• Certified CCNA or CCSA is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Role & Responsibility

• Prepared detailed plans for Project Execution, Testing and Commissioning.
• Execute Commissioning Procedures as per the project documentation.
• Prepare a checklist for on site inspection to track issue status.
• Provide technical troubleshooting and creative solutions for installation challenges including LED display color calibrations.
• Conduct site acceptance test with end users for Project Final Handover.
• Responsible for writing commissioning reports and contributing to writing procedures, O&M manual, handover documents etc.
• Provide field service support when necessary.
• Understand system integration diagrams including media player, video processor for content display, control system etc.
• Review and revise shop drawing and construction drawing.
• Conduct LED installations and commissioning training.
• Support the installation of products and solutions.
• Plan and manager field service activities.

Requirements

• Minimum of 5 years' experience in the LED installation, testing and commissioning and LED color calibration.
• Ability to conduct field training for LED installations and system operations.
• Proficiency using Microsoft , AutoCAD and equivalent software.
• Ability to maintain effective working relationships with supervisor and other departments.
• Strong Analytical skills

Preferred background

• installation and commissioning experience in LED display industry.
• Work experience in LED display company.
• System application designer and capable of AutoCAD drawings

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

• MNC Company
• Basic $4500 - $5500 Basic + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of daily maintenance, transition maintenance, turnaround maintenance and upgrading and improvement related to maintenance
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.
• Other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC, 5 days, North
• $4000 - $4800, performance bonus
• Career advancement

Job scope:

• Operate and maintain advanced probe card analyzers and QA equipment, ensuring compliance with operational standards and functionality benchmarks.
• Prepare, debug, and validate test files for probe card certification, ensuring alignment with precise technical specifications and quality criteria.
• Conduct in-depth investigations and resolve probe card related issues,employing a methodical approach to diagnose root cause and implement corrective measures.
• Engage proactively with relevant departments to maintain QA readiness for all certification processes, ensuring seamless coordination on quality-related challenges.
• Serve as a liaison with headquarters and customers on new certification processes, offering technicial updates and managing expectations effectively.
• Contribute to the continuous improvement of QA processes, leveraging industry insights to enhance operational efficiency and quality outcomes.
• Take on supplementary duties as required, supporting the team in achieving project goals.

Requirements:

• Minimum a Diploma/Degree in Electronics, Mechanical Engineering or equivalent.
• Knowledge in wafer testing or probe card is an advantage
• Good communication and written skills
• Able to start within short notice will be an advantage

Interested applicants, please send your resume to [email protected]

• 5 days, Alexandra (South-West), walking distance from MRT
• $3200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• No experience can apply

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• 1 year of relevant experience as Process Engineer
• Candidate with no experience can apply as on-the-job training is provided
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

• New Product process design and line setup.
• Understand SAP concept and align process design
• Work closely with local and HQ (Japan) designers on product change requirements, plan with the local group of members.
• Draft the implementation schedule to meet target date, disseminate and finetune the scheduled with production PICs for the implementation to be carried out smoothly.
• Follow up with related members and enforce the usage of systems developed for operation change tracking.
• Understand key functions and product master setting rules of ERP (SAP) system, process-related inline systems, traceability requirements, to align the process design with the systems.

Requirements:

• Diploma/Degree in Engineering Electrical & Electronics.
• Prefer 2 year(s) of working experience in the related field in the PCB manufacturing environment.
• Good statistical and analytical skills.
• Good communication, planning and coordination skills.
• Entry level are welcome as training will be provided.
• Travelling to Batam Factory and staying for project (min. 2weeks to max 2 months stay per visit depending on project requirements.

Electronics Manufacturing Industry

East Area/Bedok Area

5 days work week

Interested candidates, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063