Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

Job Description:

To plan, coordinate and execute pre-commissioning and commissioning activities, prepare mechanical completion checklists and coordinate with the related activities for entirety of mechanical completion and realization of commissioning.

• Reviews technical specifications, drawings, procurement and contract specifications and other relevant documents.
• Prepares mechanical completion checklists and assign to QA/QC Inspectors for completion.
• Liaises with Commercial Team and Vendor Coordinator for mechanical completion and commissioning supports from vendors and sub-contractors
• Monitors progress of mechanical completion for system readiness and assist mechanical completion work when necessary.
• Assist QA/QC Inspectors material verification check and incoming good receive when necessary.
• Liaises with Design Engineers for clarity of commissioning work scope.
• Under study system design and plan for commissioning.
• Assignment of System / Sub System Boundaries and checksheets for mechanical completion activities to facilitate site commissioning activities.
• Liaises with Design Engineers and vendors to develop commissioning procedures and submit for owner's approval.
• Liaises with owner, certifying authority, production and engineering departments on implementation and execution of commissioning procedures.
• Takes lead in commissioning preparation and work within discipline and support system commissioning of other disciplines.
• Provide commissioning assistance for vendors.
• Attend factory inspection, factory acceptance test and other related testing or compliance activities.
• Consolidates commissioning tests data and result for handover to owner.
• Ensure the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations.
• Ensure that Health, Safety & Environmental operating procedures are followed and counsel employees about compliance as necessary.
• Participate in the preparation of Safe work, Environmental control and Emergency procedures.
• Ensure that all Health, Safety, Environmental & Quality (HSEQ) plans are followed.
• Ensure that all Commissioning Permit To Work Procedure (CPTW) are followed.
• Any other associated tasks and responsibilities assigned from time to time.

Requirements:

• Degree in Mechanical, Marine and Naval Architecture Engineering with 5 years' experience in marine industry. Or diploma in Mechanical, Marine and Naval Architecture industry with at least 8 years' experience in marine industry.
• At least 5-8 years' experience in marine industry and familiar with various classification codes, regulations and be familiar with Mechanical Completion and Commissioning Procedures
• Be familiar with codes and standards such as IMO, ANSI/ASME/API, Norsok Class codes. Technical knowledge for working on mechanical/piping installation. Be familiar with marine piping system, mechanical structure and their operating principle. Practical experience on marine systems start-up and troubleshooting.
• Need to know about specifications, classification standards and computer literate. Able to utilize measuring instruments and understand measuring requirement and practice. Understand precedence and interfaces of vessel system.
• Be prepared to work on weekends, night shifts and go for sea trials, factory acceptance test and factory inspection.
• Initiative, analytical, responsible, leadership, spontaneous, good communication skills and result oriented.
• Must be physically fit.

Job scope:

• Oversee the design, installation, and maintenance of electrical systems in facilities
• Ensure compliance with electrical codes, safety standards, and regulations
• Manage projects related to electrical infrastructure upgrades and improvements
• Conduct regular inspections and audits of electrical systems and equipment
• Collaborate with cross-functional teams to optimize facility operations
• Develop and implement preventive maintenance programs for electrical systems
• Analyze and troubleshoot electrical issues, providing timely solutions
• Prepare and manage budgets for electrical projects and maintenance
• Train and mentor junior engineers and technical staff
• Maintain documentation related to electrical systems, including schematics and maintenance records

Requirements:

• Degree in Electrical Engineering or related fields with a minimum of 3 years of experience
• Experience in operation and maintenance of transformers, LV/MV switchboards, UPS, motors, frequency converters, and power distribution
• Experience in project installation of electrical distribution systems
• Ability to study protection circuits, single line drawings, and control circuits
• Knowledge of low voltage systems, including fire protection, CCTV, PA, and network systems
• Compulsory knowledge of HV, LV, transformers, switchboards, and breakers

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Production Engineer / Executive

Location: Tanjong Penjuru
Working hours: Mon to Fri from 7:30am to 5pm
Salary: $3,500 - $4,000

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

We are seeking a Lead Application Support Engineer to to manage and oversee the smooth operation of critical applications, ensuring seamless user experience and system functionality.

• Competitive remuneration package (up to $6,300 + AWS + VB).
• Hybrid working arrangement.
• Leadership Role: Take charge of support operations and lead a dedicated team.

Responsibilities:

• Oversee and manage a 24/7/365 level 1 application support team, ensuring continuous support for both applications and systems.
• Participate in the recruitment and management of staff, including planning and organizing shift rotations.
• Train team members on the application's functionality, interface, and features, ensuring they are equipped to handle support tasks.
• Ensure team members provide adequate support to end-users, while also delegating tasks and responsibilities effectively.
• Take full ownership of all issues raised, ensuring they are resolved, regardless of which development team or vendor is responsible.
• Act as the primary point of contact for both technology teams and end-user clients on a day-to-day basis.
• Maintain and update a knowledge base of known issues, defects, and troubleshooting techniques, and ensure problem tickets are properly managed.
• Handle escalations effectively and manage client expectations to ensure smooth operations.
• Debug and improve application code when necessary to resolve issues or enhance functionality.

Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Minimum of 3 years experience in relevant roles.
• Prior experience in supporting Web-based applications.
• Experience with some programming languages and willingness/ability to learn.
• Familiarity with IT industry practices and methodologies (ITIL foundation certification will be an added advantage).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Highlight:

• Permanent job opportunity
• 5 days work week, normal office working hour
• Great remuneration & benefits
• Great career progression
• Location: East / Central

Responsibilities:

• Install, configure, and manage end-user laptops, desktops, printers, and mobile devices.
• Handle onboarding and offboarding processes, ensuring security and policy compliance.
• Contribute to technical documentation and help improve internal processes.
• Provide day-to-day technical support to end users and ensure the smooth running of computers, network devices and printers.
• Troubleshoot and resolve end user application issues, maintain and update technical support documentation.
• Handle asset management, maintain inventory and liaise with vendors.

Requirements:

• 2 - 5 years of IT Technical, end-user support working experience.
• Experience in creating user's account and mailboxes on AD and Exchange.
• Good knowledge on antivirus management e.g. Windows Defender, Symantec, McAfee
• Good knowledge on repair PCs and notebooks such as O/S and Office Application troubleshooting.
• Good knowledge in diagnostic of hardware issues on PCs and notebooks.
• Knowledge in vendor management such like negotiation of pricing, vendor quotation, etc.
• Able to work independently as well as in a group.
• Good organization, communication and interpersonal skills.

HOW TO APPLY:

Interested applicants, please send your latest resume to [email protected] or click on “Apply Now” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Dick Sern (Dick Sern)

EA Personnel Reg No: R22106832

• Conduct research on competitors' products, evaluate their detailed functions, and develop new products and services.
• Perform Market Research on products of Security System in ASEAN region.
• Undertake a survey on existing and future infrastructure, including electrical power and telecom networks, to ensure compatibility of security products and services.

Requirements:

• Diploma in Electronics or equivalent
• At least 2 years of security system testing experience in alarm systems, CCTV systems, and access control systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Proficient in using electrical and manual equipment and measurement tools
• Translate drawings over to workable and buildable projects
• Cut, shape timber according to measurements/requirements
• Installation of wooden fixtures such as cabinets or shelving unit
• Maintenance of differing wooden fixtures or repairs

Job Description:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer.
• To successfully complete New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects.
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality.
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ).
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes.
• To update the status of on-going programs to the management.
• To consistently pursue for new customers.
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline.

Requirements:

• Degree or diploma in mechanical engineering/precision engineering.
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed.
• Proficient in Microsoft Office suite of programs.
• Good verbal and written communication and presentation skills.
• Strong leadership to lead, guide and inspire the project team to produce quality work and stay committed to all deliverables.
• Business oriented, meticulous, and cost sensitive.
• Ability to analyse, solve problems and decision making.
• Strong organisational skills with a can-do attitude to always improve and initiate new ways of working to achieve results.

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Job Description

• Industry/ Organization Type: Precision Manufacturing
• Position Title: Lead Engineer (Engineering Design department)
• Working Location: Zhuhai, China
• Working Hours: 5 Days, Mon-Fri (8 am-5.30 pm)
• Salary Package: Basic Salary (Up to￥30K) + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Coordinate and align the Engineering teams and resources with the objective of “Design for Manufacturing” to achieve product leadership in the related industry.
• Understand, communicate, and manage the core needs of customers’ design and their requirements.
• Offer cooperation and support on Engineering needs as required by other departments.
• Operate as a team player with the ability to collaborate with other Department Heads in achieving corporate objectives.
• Lead engineering initiatives to ensure product designs are optimized for manufacturing and industry leadership.

APPLY NOW!!!

• Degree in Mechanical Engineering or its equivalent.
• Minimum 10 years of relevant working experience in the related industry.
• Excellent communicator with strong organizing and leadership skills.
• Knowledgeable in material substrates such as elastomer (Silicone rubber), plastics and metal.
• Hands-on experience with Pro-E Creo and Unigraphics (NX)/ AutoCAD software.
• Exposure to managing Product Development of component parts relating to Silicone Rubber, Plastics and Metal (any 2 out of 3 required substrates is acceptable) with client’s 2D/ 3D drawings.
• Possess some secondary process and tooling knowledge.
• Good rapport in interfacing and negotiating with local and global customers on Product and Engineering Development.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to anraduscn.researcher01(at)gmail.com. Please indicate #67118 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

§ Planning, co-ordination and execution of LTA and SMRT projects

§ To attend all interface and co-ordination meetings with different stakeholders and contractors

§ Installation, monitoring, supervision, testing and troubleshooting of RTU at site

§ Preparation of project documents and drawings

Requirements:

§ Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

§ Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job Description

• Industry/ Organization Type: Marine/ Oil & Gas
• Position Title: Design Engineer
• Working Location: Loyang (Transport provided)
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Up to $4,200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that engineering designs meet project-specific requirements, adhere to Engineering Standard Practices, and align with the company's ISO procedures, as well as national and international engineering norms, codes, and safety standards.
• Create essential documents and drawings, including block diagrams, bills of materials, functional design specifications, design calculations, wiring diagrams, and other necessary documentation. These ensure that equipment can be procured, integrated, tested, installed, and delivered to the customer on schedule.
• Verify that equipment provided for specific projects meets relevant specifications, complies with project technical standards, is correctly configured, and is fully completed.
• Ensure that the specified and designed equipment can be effectively integrated with other systems and equipment with which it interfaces.
• Develop test procedures suitable for project commissioning and provide technical support to the system assembly and integration team.
• Carry out other tasks as assigned by the Projects & Retrofit Manager or Assistant Manager.

APPLY NOW!!!

• At least a Diploma in IT or Engineering with minimum 2 years of related working experience.
• Proficient with AutoCAD and MS Office.
• Proficiency in one or more of the following systems:

1. LAN & IP Telephony: Experience in voice/data network design, implementation, and deployment; familiar with Juniper, Cisco, and HP Procurve switches and routers.
2. Radio Communication: Expertise in HF/VHF/UHF/Microwave/VSAT systems; capable of frequency interference analysis and radio coverage analysis; familiar with analogue/digital radio systems and trunked radio systems.
3. PAGA System: Experience in PAGA system design and sound coverage analysis simulation.
4. Security Systems (CCTV & Access Control): Experience with analogue/IP CCTV and access control systems; familiarity with Pelco, Bosch, Synetic, GE, LENEL, Bosch systems; PLC system experience is a plus.
5. Navigation Systems: Knowledge of Aeronautical VHF Radio, Meteorological Monitoring, Non-Directional Beacons, Marine Radar, GMDSS, Gyrocompass, and Navigation Aids.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68836 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Roles & Responsibilities

• Provide space planning, design conceptualization, materials and color scheme specification based on client needs
• Develop 3d renderings & layout plans with detailed specifications (i.e. M&E plans, carpentry detail and sectional drawings)
• Management of projects to meet deadlines
• Involve in site measurement, site marking & selection of material used
• Preparation of mood boards and material boards
• Assist in project management and site supervision
• Ability to prepare quotations are an added advantage

Requirements

• Diploma / Bachelors’ Degree in Interior Design or ID Architecture
• Proficiency with AutoCAD, 3D Max/Vray, Sketchup & Photoshop
• Preferably with relevant experience as an Interior Designer, however entry level with no experience are welcome to apply
• Good knowledge of the design process, including furniture/carpentry systems, specifications and detailing, basic M&E and detail construction drawings, color & materials
• Self-motivated, hardworking, willingness to work independently
• Project management skills and able to think out of the box

To apply

For application, please submit your CV AND portfolio CV should also include the following:

• Current/ last drawn salary
• Expected salary
• Notice period (if any)

Senior Marketing & Communication Executive

Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
Working Hours: 8.15am - 5.45pm
Working Days: 5 Days [Monday - Friday]
Salary: $3,000 to $3,500

Responsibilities

• Attend to customer enquiries through various channels such as email, phone and in person.
• Design and/or edit marketing collaterals (brochure, leaflets etc)
• Oversee library of self-produced and principal supplied brochure, video resources and other Marketing and Sales support materials.
• Conceptualise, plan and execute marketing campaigns; both online and offline
• Handle all activities related to organisation of events (training, product seminars, roadshows, exhibitions – event budget, liaising with vendors, handling, registration, managing exhibition booths etc)
• Maintain website and work with vendor.
• Social media management, review and assist to maximise brand experience and engagement.
• Explore opportunities with different e-commence platforms and partners for collaboration.
• Execution of content creation (videography, photography) and produce product videos.
• Prepare and update price list.
• Any other ad-hoc duties assigned.

Requirements:

• Bachelor’s degree in marketing, Digital Marketing, or related field
• At least 2 years of relevant working experience
• Experience in digital marketing and social media management.
• Knowledge of graphic design software (e.g., Adobe Creative Suite)
• Familiarity with marketing analytics tools (e.g., Google Analytics)

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Roles & Responsibilities

• Coordinate and oversee the design of electrical and mechanical systems for LTA infrastructure projects
• Ensure that E&M designs comply with local regulations, LTA standards, and project specifications.
• Collaborate with engineers, consultants, and contractors to ensure smooth integration of E&M systems with other project elements (civil, structural, and architectural).
• Conduct design reviews, ensuring alignment with project requirements and resolving any discrepancies or technical challenges.
• Liaise with LTA representatives and ensure design submissions are timely and meet LTA’s approval process.
• Manage and track the progress of E&M design deliverables to ensure timely completion.
• Assist in resolving on-site technical issues related to E&M systems and provide design clarification to construction teams.
• Ensure that safety and quality standards are upheld in all E&M design implementations.
• Prepare regular reports on the progress of E&M designs and updates for the project management team.

Job Requirements

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field.
• 5–8 years of experience in E&M design coordination, particularly in infrastructure or transport-related projects.
• Experience working on LTA projects or other government-regulated transport infrastructure projects is highly desirable.
• Proven track record in managing the design and installation of electrical and mechanical systems.

• 5 day work week

• Responsible for assembling and building prototypes

• Medical & Dental insurance & Quarterly Bonus.

 JOB DESCRIPTION

SIGMADESIGN is a fun, fast-paced engineering consulting company currently experiencing explosive growth. We are looking for an Assembly Technician. Curiosity, competency and confidence are a must.

Primary Function :

Responsible for assembling and building prototypes and products utilizing various tools in support of SIGMADESIGN’s engineering production and manufacturing activities. Occasionally provides support in the form of documentation and troubleshooting until units/parts are completed to acceptable test procedures and routing operations.

Essential Job Functions – Responsibilities :

• Performs processes to complete mechanical and electrical assemblies, subassemblies, electrical wiring, and wire harness assembly using common hand tools and electronic lab tooling.
• Tests functional performance of assembly and observes and records results.
• Assembles products according to routings and blueprints; measures parts to specified tolerances.
• Uses hand tools, chemicals and adhesives as needed.
• Maintains and monitors test equipment as necessary to ensure continued accuracy.
• Keeps production supervisors advised of work status, workload, problems and progress as related to work assignments.
• Demonstrate Technical Capacity, Learning Orientation, Time Management, and Thoroughness Skills.
• Maintain a clean and safe work environment including tools and assembly production areas.

Education and Experience: (Knowledge, Skills, & Abilities)

• Minimum NITEC in any Engineering discipline
• Minimum one year of recent direct or related experience required.
• Basic computer literacy skills, basic file structure understanding, and web navigation; working knowledge of Microsoft Office productivity tools including Outlook, Excel, and Word.
• Experience and ability reading and creating simple schematics; able to strictly follow engineering directions or procedures as required.
• Ability to multitask (make progress on multiple unrelated projects) and prioritize workload.
• Detail oriented with a focus on quality, execution and follow through.
• Hands-on skills and mechanical aptitude skills required.
• Excellent written and verbal communications skills.
• Strong basic math skills.
• Experience or familiarity with multimeters, oscilloscopes, and other typical electronic lab equipment a plus.

Work Environment:

Standard lab/production environment. Air-conditioned facility. Occasionally may be required to work in environmental conditions that emulate typical user environments in order to facilitate design testing and validation.

Compensation/Benefits:

• Salary will commensurate according to experience
• Profit Sharing
• Medical & Dental Insurance
• Paid Annual Leave

Click Apply Now for an interview!

Job Description & Requirements

DM Interior Design Singapore is hiring Sales Designers. We are looking for passionate individuals to join our dynamic team!

Here’s a chance for you to transform your career:

✔️ Full time sales designer

✔️ Minimum 3 years sales experience in the interior design sales industry

JOB HIGHLIGHTS:

⭐️ In-house training and close mentorship

⭐️Elevated Income

⭐️Great career advancement opportunities

⭐️Substantial personal elevation & growth

⭐️Tight-knitted team, enjoyable work environment

⭐️Convenient central office location

Email your resumes to [email protected] / or whatsapp to +6598630986

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Electrical) for the next phase of their business. They are located in West.

Duties:

• Lead Electrical discipline for CAPEX projects, supervising consultants, contractors, and vendors.
• Develop and issue Electrical design bases, specifications, and scopes of work.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Approve Electrical deliverables and develop necessary project documents.
• Support regulatory approval processes.
• Collaborate with project management and engineering teams.
• Witness factory acceptance tests (FAT).
• Ensure accuracy of engineering databases (e.g., SmartPlant tools).
• Review and document as-built deliverables.
• Follow Quality Management System and QA plans.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 15 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Highlights:

• Fortune 100 MNC
• Permanent job opportunity
• Great remuneration & benefits
• Great career progression
• Location: Suntec City

Responsibilities:

• Design and build data pipelines: Create the infrastructure to collect, process, and store data from various sources.
• Develop data assets platform: This platform provides a centralized repository for managing and accessing data assets.
• Implement automated SQL generation: Create tools and processes to automatically generate SQL queries based on user-defined criteria or business requirements. This can involve using techniques like query templates, metadata-driven generation, or machine learning algorithms.
• Create new IPs in Singapore in area of expertise
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development
• Overseas process development support for short term assignments

Requirements:

• Masters (w/ min. 2 yrs of relevant working exp./ PhD (w/ min. 1 yr of relevant working exp.

1. Computer Science
2. Data Science
3. Statistics Applied Sciences, or related field

• Programming skills : Proficiency in programming like Python, SQL, Java, or Scala is essential for data manipulation and automation.
• Data Warehousing and ETL: Understanding of data warehousing concepts, ETL (Extract, Transform, Load) processes, and tools like Informatica, Talend, or Airflow.
• Database Management: Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra) is crucial.
• Cloud Platforms: Experience with deploying and managing data infrastructure.
• Data Modelling: Ability to design and implement data models that effectively represent business requirements.
• Data Quality: Understanding of data quality concepts, validation techniques, and tools.
• Automation Tools: Familiarity with tools like Apache Airflow, Kubernetes, or Ansible for automating data pipelines and infrastructure.
• Machine Learning: Basic understanding of machine learning algorithms can be beneficial for certain automation tasks, such as query optimization or anomaly detection.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email to [email protected] with provided your latest resume in MS WORD format with below information.

• Last drawn salary
• Expected salary
• Notice period
• Reason for leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Dick Sern (Dick Sern)

EA Personnel Reg No: R22106832

Our client is a manufacturer of machines that offers automated solutions for the pharmaceutical industry and healthcare facilities.

• Conduct system performance tests, data analysis, and troubleshooting to ensure optimal functionality of mechanical, software, and hardware components.
• Execute validation protocols for automated systems, ensuring compliance with industry standards and regulations.
• Collaborate with cross-functional teams, including design, manufacturing, and quality assurance, to identify validation requirements and methodologies.

Requirements:

• Diploma and above
• At least 2 years of experience in validation engineering, particularly with automated systems.
• Experience with robotics, control systems, or advanced manufacturing technologies.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description & Requirements

Min 2 yrs. of SD agent working experience

Good Laptop/Desktop troubleshooting skillsets

Excellence customer handling skills

Excellence communication skills

Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level

Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.

Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.

Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

Project Engineer

Working Days & Hours: 5.5 / 6 days | Mon-Sat: 8am to 6pm
Working Location: Islandwide
Salary Range: $4000-$5000

Job Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Organize labor, equipment and material for day to day site activities
• Carry out material receiving inspection and maintaining material record. All delivery order are to be return to office for record
• Prepare daily and monthly progress report, perform and maintain inspection record.
• Any other duties assigned

Job Requirement:

• Relevant Experience
• Degree Holder in Civil Engineering / Construction Management or its equivalent

Tan Jia Jun | REG No: R23112681
The Supreme HR Advisory Pte Ltd | EA No: 14C7279