Our client is a global leader in semiconductor inspection solutions.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

The Role:

We would like to get on board a Telecommunication engineer (or similar) to work inside of the railway communication infrastructure area, to develop and deploy communication transport solutions (fixed and radio) for large international railway projects. Main tasks to be performed by the COMMS engineer:

o Analysis of project requirements and propose the solutions accordingly.

o Development of system technical specifications.

o Development of system architectures and integration with 3rd parties' systems.

o Technical interface with customers and other contractors.

o Realization of testing and commissioning works onsite.

o Network troubleshooting for wired and wireless systems both.

o Technical support to systems once into operation after commissioning.

o Onsite testing and commissioning.

The Requirements:

• Tertiary qualification in Electrical and Electronics Engineering

• Minimum 2 years experience working on various communication systems technologies such as fibre-optic transmissions, digital trunked radio, public address and telephony, CCTV surveillance, access management and travel information systems preferred

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

1 OSS System Implementation and Deployment

• Customer requirements analysis (incl. pre-implementation analysis works, requirements clarifications and solution approval)
• Configuration of the system
• Data modelling
• Data migration and data transformation
• System installation
• Auto discovery & Reconciliation – Integration with NMS’s or Network Elements with use of scripts and API’s to retrieve data from the network
• Service design – implementation of the flows with use of SunVizion API to design service
• Service fulfilment – integration with NMS’s or Network Elements with use of scripts and API’s to activate service
• Integration with other business systems
• Reports preparation
• Delivering trainings to the customer
• Project documentation preparation
• Supporting User Acceptance Tests (including technical negotiations with regards to classifying issues observed during tests and agreeing how they should be addressed) as well as any other tests performed during deployment
• Monitoring of customer satisfaction (user experience)

2 OSS System Support & Maintenance

• First and, in the long term, also the second line of support
• Communication with the third (and initially also the second) support line in Poland, in order to meet the agreed KPI parameters.
• Communication with the customer
• Analysing customer issues
• Solving issues if can be solved locally and transferring issues to remote team with required details if product issue
• Verification of the new versions of the SunVizion product before go live
• New version installation with respecting of the support windows

3 Presales and Business Development Support

• Participation in discussions with potential customers in order to understand their needs and prepare appropriate solutions
• Participation in presentations and workshops to potential customers (including live demonstration of the solution)

Essential Duties and Responsibilities:

1. Quality Assurance and Control:

• Develop, implement, and maintain quality assurance plans, procedures, and control measures.
• Monitor and analyse production processes to detect and resolve quality issues.
• Ensure compliance with relevant regulatory requirements, including FDA, ISO 13485, and other applicable standards.
• Support internal and external audits and regulatory inspections.
• Investigate and resolve product-related issues, deviations, and non-conformities, with the authority to recommend corrective and preventive actions.
• Ensure the non-conformance or quality issue is resolved and complete in a timely manner.
• Participate in new product introductions to ensure quality is built into all products early in their life cycle
• Support validation processes including IQ, OQ, PQ, process validation and test method validation.

2. Process Improvement

• Identify opportunities for process improvements to enhance product quality and manufacturing efficiency.
• Lead and drive QA initiatives across the product areas
• Lead or participate in root cause analysis and corrective action planning.
• Support and drive cost improvement project

3. Customer Interaction:

• Address customer complaints and feedback related to product quality.
• Work closely with customers to understand their quality requirements and ensure that products meet their specifications.
• Communicated on any potential change request of the processes to customer.
• Provide technical support and quality-related information to customers.

4. Documentation and Reporting:

• Maintain comprehensive records of quality control activities, inspection results, and non-conformance reports.
• Prepare and support monthly / annual quality reports to management and other stakeholders.
• Ensure proper documentation and traceability throughout the manufacturing process.

5. Training and Development:

• Train manufacturing staff on quality standards, procedures, and best practices.
• Promote a culture of quality and continuous improvement within the organization.

Education/Experience and Qualifications:

• Degree in Engineering or science, with 2 - 5 years of progressive Quality responsibility, preferably in medical device / pharmaceutical manufacturing.
• Diploma holders in Engineering or science with more than 5 years' experience in Quality are welcomed to apply
• Knowledge of regulatory requirements and quality standards, including FDA regulations and ISO 13485 standards.
• Strong analytical and problem-solving skills, with the ability to troubleshoot complex issues.

Scope

• In General, Plan, manage & control overall scope of Electrical works of

projects.

• Understand Project specifications, prepare specifications for electrical

equipment and systems

• Technically evaluate suppliers’ proposals.

• Guide Designers to prepare Sing[le Line Diagrams/Subcontractors in

producing Field Engineering Drawings and verify their accuracy based on

project specifications and applicable local and international codes.

• Manage Supervisors/Subcontractors for the execution of construction works

by regular visits and meetings.

• Interface with other disciplines proactively to ensure there are no

mismatches.

• Liaise with clients’ Engineers/ Supervisors and Professional Engineers for the

smooth execution of projects.

Requirements

• Recognized Degree in Electrical or Electronics or Instrumentation

Engineering with minimum 8 years relevant working experience, preferably in

the chemical engineering industry.

• Experience with 22KV & LV Electrical system is required preferably in

Singapore and understanding of Singapore codes.

• Matured, Proactive, leadership qualities, good communication and

interpersonal skills are essential and willing to work longer hours based on

project needs.

• Familiarity with relevant Local & International Engineering Codes and

Practices.

• Senior positions will be considered for candidates with more experience in

the relevant field

Experience: 1-5 Years

Role: System Engineer

Key Skills: Nice Engage Voice Recording systems admin

Key Responsibilities:

Support Unified Comms Systems

· Maintaining Unified Comms system through preventive maintenance and follow ups on problem resolutions.

· Attending to user requirements and work with vendor to provide solutions.

· Work with other departments for smooth flow of processes and procedures.

Projects rollout

· Plan technical deliverables including system enhancements and upgrades to meet project requirements within allocated budget and schedule.

· Plan resource allocation and utilisation across the various project and quarterly releases.

· Plan and collaborate across different application teams and overseas counterparts to manage technical dependencies of the solution in the project delivery cycle.

· Monitor and manage risks /issues related to technical delivery.

Key Requirements:

1. Skilled in NICE Engage Voice Recording systems administration.

2. Experienced in various roles in Service Delivery, Vendor Management and Incident / Change Management

Key Responsibilities:

• Collaborate with the Facilities Manager to engage with clients regarding all operational tasks and projects.
• Supervise and ensure that maintenance programs and rectification tasks are efficiently managed by a team of technical officers and technicians.
• Oversee and coordinate maintenance activities for various Air Conditioning and Mechanical Ventilation (ACMV) systems, including chiller systems, chilled water systems, direct expansion (DX) systems, mechanical ventilation systems, clean room systems, and building management systems.
• Develop comprehensive plans for the installation, maintenance, and operation of ACMV systems.
• Provide guidance and lead technical investigations for rectification works, ensuring effective resolution of issues.
• Ensure daily air conditioning thermal comfort levels are maintained within acceptable limits according to established codes of practice.
• Monitor and report on maintenance work progress, follow up on action items, and maintain thorough maintenance checklists and schedules.
• Innovate and implement improvements to operational processes aimed at enhancing efficiency and promoting energy conservation.
• Work collaboratively with owners, users, consultants, vendors, and contractors to provide feasible solutions that meet engineering functional requirements and ensure project objectives are achieved.
• Conduct regular inspections of existing air-conditioning systems to verify that all maintenance programs are effectively implemented in strict adherence to guidelines and Provide technical specifications for ACMV system upgrades or renovation projects as needed.
• Stay informed about local codes of practice, including ASHRAE standards, to ensure compliance in all operations.
• Ensure that all work is carried out safely and in accordance with established safety procedures.
• Coordinate with contractors for rectification and ad-hoc works, ensuring that all tasks are executed efficiently.
• Investigate, analyze, and determine root causes of breakdowns and faults, reporting findings effectively.
• Prepare detailed technical reports and proposals regarding breakdowns and maintenance activities.

Education and Experience:

• Bachelor’s degree in Mechanical Engineering or an equivalent engineering discipline (mechanical, electrical, or industrial).
• Minimum of 3 years of hands-on experience in ACMV (Air Conditioning and Mechanical Ventilation) systems, facilities management, or project management.
• Proficient in guiding and troubleshooting ACMV faults, with a solid understanding of construction principles and building processes.
• Thorough understanding of building regulations and health and safety protocols.
• Exceptional communication skills with the ability to collaborate effectively with non-engineering team members.
• Detail-oriented, self-motivated, disciplined, and well-organized, with a strong safety mindset and a commitment to exemplary workplace safety and health (WSH) practices.
• Strong analytical and problem-solving abilities, capable of troubleshooting on-site issues effectively.
• Familiarity with project management principles and practices.

JOB SUMMARY

• A talented and passionate senior individual to join Standard Chartered as a Principal Engineer. In this role, you will drive the engineering strategy of the platform teams under Technology & Architecture. This role will play a critical part in helping shape and guide the future growth and development for Technology Strategy & Architecture and will be responsible for the creation and transformation of the capabilities that will define how we organise to deliver on the strategy. This includes leading the design and delivery of certain platform capabilities crucial to our strategy. In addition, you will be the example for engineering excellence and will set the engineering practices for the organization. This includes defining the proper practices for code reviews, testing, software and pipeline design, and ensuring proper security and reliability practices are enforced.
• Transformation, Technology & Operations (TTO) is a global organisation providing Cloud, Data, End User, Infrastructure, Integration, IT Service Management, Network and Security capabilities to all our clients and colleagues globally with an operating budget of $500mil USD and $200mil USD of change

RESPONSIBILITIES

Strategy

• Have the responsibility to deliver the architectural requirements on functional and non-functional (security and reliability) of technology platform under Software Engineering platform services
• Lead the design and delivery of strategic initiatives for T&A
• A versatile engineer that can be the subject matter expert for certain areas of the platform that’s provided by the T&A software engineering platforms
• Standardised and simplify software engineering platform landscape and architecture
• Deliver on the best practices for engineering to enable business and platform performance
• Ensure adequate engineering practices are implemented to deliver to the highest standard across the department
• Develop and champion solutions through coding and automation
• Ensure platform delivery and services meet highest level of standard of availability and reliability.
• Ensure platform delivery and services meet security and risk requirements and operational SLA.
• Perform extensive periodic code-review and improvements to our code-base
• Perform extensive periodic reliability and security review to our platform
• Anticipate and evaluate business challenges and take action to mitigate
• Develop opportunities for innovation and out of the box thinking
• Enforce (through automation) engineering processes and policies and associated risk controls

Business

• Develop and maintain strong relationships with internal and external stakeholders
• Deliver new solutions and new practices to ensure the organisation capitalises on industry learning and growth
• Contribute to new business initiatives and projects
• Appraise and interpret complex requirements to understand the impact of the organisation's ability to deliver change

Processes

• Realize the end-to-end delivery practice and its associated list of processes
• Responsible for delivery processes
• Be responsible for the risk management of change
• Drive the optimisation of delivery by reviewing and optimising data pertaining to the effectiveness of change

Risk Management

• Own the risks linked to the delivery of code into production
• Own the risks linked to the maintenance of code in production
• Own the end-to-end risks associated with the dev/test environments and the requisite tooling
• Drive for the closure of risks, operational events and audit findings on time, once and done
• Educate the team on risk management and continual mitigating of risk
• Comply with organisation risk management framework
• Find automated solutions to reduce risk and prevent human and manual solutions

Governance

• Awareness and understanding of the regulatory framework, in which the Group operates, and the regulatory requirements and expectations relevant to the role.

Regulatory & Business Conduct

• Display exemplary conduct and live by the Group’s Values and Code of Conduct.
• Take personal responsibility for embedding the highest standards of ethics, including regulatory and business conduct, across Standard Chartered Bank. This includes understanding and ensuring compliance with, in letter and spirit, all applicable laws, regulations, guidelines and the Group Code of Conduct.
• Effectively and collaboratively identify, escalate, mitigate and resolve risk, conduct and compliance mattersTake personal responsibility for embedding the highest standards of ethics, including regulatory and business conduct, across Standard Chartered Bank. This includes understanding and ensuring compliance with, in letter and spirit, all applicable laws, regulations, guidelines and the Group Code of Conduct

Key Stakeholders

• TTO Management Team
• T&A Management Team
• Software Engineering Platform Teams
• Engineers
• Business, Regional & Country CIOs & COOs
• CISRO, CISO
• CDO
• Group and Country Compliance & Regulators
• Group Internal Audit
• Operational Risk

Other Responsibilities

• Stakeholder management and education sessions to clarify complex topics into digestible sound bites
• Be an example of great engineering leadership in terms of ownership, accountability, and practices
• Perform other responsibilities assigned under Group, Country, Business or Functional policies and procedures
• Responsible for building a culture of good conduct

Our Ideal Candidate

• 10+ years of experience in Software Engineering, DevOps, or related fields.
• Bachelor’s degree in computer science or equivalent.
• Demonstrate expertise in developing and designing reliable software for distributed systems.
• Has good fundamentals pertaining to software engineering, containers, databases, networks, and infrastructure.
• Has experience working for heavily regulated financial institutions with a good understanding of security and risk.
• Ability to demonstrate expertise in one or two programming languages preferably Python and Golang

Role Specific Technical Competencies

• Coding
• Software Architecture
• Risk Management
• Cloud Pipelines and Environments
• Containers, Networking, and Infrastructure
• Software engineering and DevOps (coding, testing, performance testing, CI/CD, monitoring)
• Machine Learning (knowledge and experience is a plus)
• Security (encryption, mutual TLS, hashing etc.)

About Standard Chartered

We're an international bank, nimble enough to act, big enough for impact. For more than 170 years, we've worked to make a positive difference for our clients, communities, and each other. We question the status quo, love a challenge and enjoy finding new opportunities to grow and do better than before. If you're looking for a career with purpose and you want to work for a bank making a difference, we want to hear from you. You can count on us to celebrate your unique talents and we can't wait to see the talents you can bring us.

Our purpose, to drive commerce and prosperity through our unique diversity, together with our brand promise, to be here for good are achieved by how we each live our valued behaviours. When you work with us, you'll see how we value difference and advocate inclusion.

Together we:

• Do the right thing and are assertive, challenge one another, and live with integrity, while putting the client at the heart of what we do
• Never settle, continuously striving to improve and innovate, keeping things simple and learning from doing well, and not so well
• Are better together, we can be ourselves, be inclusive, see more good in others, and work collectively to build for the long term

What we offer

In line with our Fair Pay Charter, we offer a competitive salary and benefits to support your mental, physical, financial and social wellbeing.

• Core bank funding for retirement savings, medical and life insurance, with flexible and voluntary benefits available in some locations.
• Time-off including annual leave, parental/maternity (20 weeks), sabbatical (12 months maximum) and volunteering leave (3 days), along with minimum global standards for annual and public holiday, which is combined to 30 days minimum.
• Flexible working options based around home and office locations, with flexible working patterns.
• Proactive wellbeing support through Unmind, a market-leading digital wellbeing platform, development courses for resilience and other human skills, global Employee Assistance Programme, sick leave, mental health first-aiders and all sorts of self-help toolkits
• A continuous learning culture to support your growth, with opportunities to reskill and upskill and access to physical, virtual and digital learning.
• Being part of an inclusive and values driven organisation, one that embraces and celebrates our unique diversity, across our teams, business functions and geographies - everyone feels respected and can realise their full potential.

Recruitment Assessments

Some of our roles use assessments to help us understand how suitable you are for the role you've applied to. If you are invited to take an assessment, this is great news. It means your application has progressed to an important stage of our recruitment process.

Visit our careers website www.sc.com/careers

JOB SUMMARY

• A talented and passionate senior individual to join Standard Chartered as a Principal Engineer. In this role, you will drive the engineering strategy of the platform teams under Technology & Architecture. This role will play a critical part in helping shape and guide the future growth and development for Technology Strategy & Architecture and will be responsible for the creation and transformation of the capabilities that will define how we organise to deliver on the strategy. This includes leading the design and delivery of certain platform capabilities crucial to our strategy. In addition, you will be the example for engineering excellence and will set the engineering practices for the organization. This includes defining the proper practices for code reviews, testing, software and pipeline design, and ensuring proper security and reliability practices are enforced.
• Transformation, Technology & Operations (TTO) is a global organisation providing Cloud, Data, End User, Infrastructure, Integration, IT Service Management, Network and Security capabilities to all our clients and colleagues globally with an operating budget of $500mil USD and $200mil USD of change

RESPONSIBILITIES

Strategy

• Have the responsibility to deliver the architectural requirements on functional and non-functional (security and reliability) of technology platform under Software Engineering platform services
• Lead the design and delivery of strategic initiatives for T&A
• A versatile engineer that can be the subject matter expert for certain areas of the platform that’s provided by the T&A software engineering platforms
• Standardised and simplify software engineering platform landscape and architecture
• Deliver on the best practices for engineering to enable business and platform performance
• Ensure adequate engineering practices are implemented to deliver to the highest standard across the department
• Develop and champion solutions through coding and automation
• Ensure platform delivery and services meet highest level of standard of availability and reliability.
• Ensure platform delivery and services meet security and risk requirements and operational SLA.
• Perform extensive periodic code-review and improvements to our code-base
• Perform extensive periodic reliability and security review to our platform
• Anticipate and evaluate business challenges and take action to mitigate
• Develop opportunities for innovation and out of the box thinking
• Enforce (through automation) engineering processes and policies and associated risk controls

Business

• Develop and maintain strong relationships with internal and external stakeholders
• Deliver new solutions and new practices to ensure the organisation capitalises on industry learning and growth
• Contribute to new business initiatives and projects
• Appraise and interpret complex requirements to understand the impact of the organisation's ability to deliver change

Processes

• Realize the end-to-end delivery practice and its associated list of processes
• Responsible for delivery processes
• Be responsible for the risk management of change
• Drive the optimisation of delivery by reviewing and optimising data pertaining to the effectiveness of change

Risk Management

• Own the risks linked to the delivery of code into production
• Own the risks linked to the maintenance of code in production
• Own the end-to-end risks associated with the dev/test environments and the requisite tooling
• Drive for the closure of risks, operational events and audit findings on time, once and done
• Educate the team on risk management and continual mitigating of risk
• Comply with organisation risk management framework
• Find automated solutions to reduce risk and prevent human and manual solutions

Governance

• Awareness and understanding of the regulatory framework, in which the Group operates, and the regulatory requirements and expectations relevant to the role.

Regulatory & Business Conduct

• Display exemplary conduct and live by the Group’s Values and Code of Conduct.
• Take personal responsibility for embedding the highest standards of ethics, including regulatory and business conduct, across Standard Chartered Bank. This includes understanding and ensuring compliance with, in letter and spirit, all applicable laws, regulations, guidelines and the Group Code of Conduct.
• Effectively and collaboratively identify, escalate, mitigate and resolve risk, conduct and compliance mattersTake personal responsibility for embedding the highest standards of ethics, including regulatory and business conduct, across Standard Chartered Bank. This includes understanding and ensuring compliance with, in letter and spirit, all applicable laws, regulations, guidelines and the Group Code of Conduct

Key Stakeholders

• TTO Management Team
• T&A Management Team
• Software Engineering Platform Teams
• Engineers
• Business, Regional & Country CIOs & COOs
• CISRO, CISO
• CDO
• Group and Country Compliance & Regulators
• Group Internal Audit
• Operational Risk

Other Responsibilities

• Stakeholder management and education sessions to clarify complex topics into digestible sound bites
• Be an example of great engineering leadership in terms of ownership, accountability, and practices
• Perform other responsibilities assigned under Group, Country, Business or Functional policies and procedures
• Responsible for building a culture of good conduct

Our Ideal Candidate

• 10+ years of experience in Software Engineering, DevOps, or related fields.
• Bachelor’s degree in computer science or equivalent.
• Demonstrate expertise in developing and designing reliable software for distributed systems.
• Has good fundamentals pertaining to software engineering, containers, databases, networks, and infrastructure.
• Has experience working for heavily regulated financial institutions with a good understanding of security and risk.
• Ability to demonstrate expertise in one or two programming languages preferably Python and Golang

Role Specific Technical Competencies

• Coding
• Software Architecture
• Risk Management
• Cloud Pipelines and Environments
• Containers, Networking, and Infrastructure
• Software engineering and DevOps (coding, testing, performance testing, CI/CD, monitoring)
• Machine Learning (knowledge and experience is a plus)
• Security (encryption, mutual TLS, hashing etc.)

About Standard Chartered

We're an international bank, nimble enough to act, big enough for impact. For more than 170 years, we've worked to make a positive difference for our clients, communities, and each other. We question the status quo, love a challenge and enjoy finding new opportunities to grow and do better than before. If you're looking for a career with purpose and you want to work for a bank making a difference, we want to hear from you. You can count on us to celebrate your unique talents and we can't wait to see the talents you can bring us.

Our purpose, to drive commerce and prosperity through our unique diversity, together with our brand promise, to be here for good are achieved by how we each live our valued behaviours. When you work with us, you'll see how we value difference and advocate inclusion.

Together we:

• Do the right thing and are assertive, challenge one another, and live with integrity, while putting the client at the heart of what we do
• Never settle, continuously striving to improve and innovate, keeping things simple and learning from doing well, and not so well
• Are better together, we can be ourselves, be inclusive, see more good in others, and work collectively to build for the long term

What we offer

In line with our Fair Pay Charter, we offer a competitive salary and benefits to support your mental, physical, financial and social wellbeing.

• Core bank funding for retirement savings, medical and life insurance, with flexible and voluntary benefits available in some locations.
• Time-off including annual leave, parental/maternity (20 weeks), sabbatical (12 months maximum) and volunteering leave (3 days), along with minimum global standards for annual and public holiday, which is combined to 30 days minimum.
• Flexible working options based around home and office locations, with flexible working patterns.
• Proactive wellbeing support through Unmind, a market-leading digital wellbeing platform, development courses for resilience and other human skills, global Employee Assistance Programme, sick leave, mental health first-aiders and all sorts of self-help toolkits
• A continuous learning culture to support your growth, with opportunities to reskill and upskill and access to physical, virtual and digital learning.
• Being part of an inclusive and values driven organisation, one that embraces and celebrates our unique diversity, across our teams, business functions and geographies - everyone feels respected and can realise their full potential.

Recruitment Assessments

Some of our roles use assessments to help us understand how suitable you are for the role you've applied to. If you are invited to take an assessment, this is great news. It means your application has progressed to an important stage of our recruitment process.

Visit our careers website www.sc.com/careers

* We are looking for a well organised site engineer with strong leadership skills to join our growing team

* Develop engineering plans for construction, renovation, and repairs,demolition works

* Prepare estimates, as well as on-site visit reports and project progress reports

* Review and analyze plans, specifications, and estimates submitted by contractors

* Coordinate and manage project schedules and budgets

*Monitor site operations and determine the work progress

*Track job progress, schedules, budgets, and stafng

Site engineers typically split their time between ofces and jobsites, using standard ofce software equipment in addition to the following:

Computer-aided drafting (CAD) software (AutoCAD, SketchUp)

Job Description:

1. Prepare and deliver technical presentations explaining products or services to customers.
2. Coordinate with customers and engineers / Operation department to assess service job requirements.
3. Coordinate with admin staff for engineer deployment.
4. Secure and renew orders and overseas delivery/logistics.
5. Collaborate with other Sales teams to understand customer requirements and provide sales / technical support.
6. Expand sales for existing & new customers and product portfolio.
7. Follow up and negotiate for orders with customers. Regular customer visits.
8. Identify new opportunities under market conditions and prepare market reports accordingly.
9. Comprehensive communication with the customers of the target market regarding the products.
10. Attend vessels/sites in both local and overseas for engine repair/maintenance.
11. Any other ad-hoc duties as assigned by the department head.

Job Requirements:

1. Degree in Marine/Business/Marketing or equivalent
2. Minimum 3 to 5 years of experience in the Marine Industry.
3. A strong technical knowledge of Marine Engines and Spare parts
4. Knowledge and understanding of the overseas markets, trading skills required.
5. Required to make business trips to developing countries and work in high stress sales environment and multitask.
6. Have the experience to station in developing countries.
7. Good communication and interpersonal skills.
8. The ability to build relationships with clients quickly.
9. Analytical and problem-solving skills.
10. Mature, independent, good working attitude, and a team player.
11. Candidates must be keen to work hands-on and initiative.
12. Positive attitude, willing to travel.

The Senior Network Engineer will be responsible for providing technical support, proposing solutions, and addressing project-related queries for all wired and wireless networks. This role requires strong expertise in network equipment management, troubleshooting, change management, and audit compliance, as well as maintaining network documentation and vendor relations. The position also involves managing firewalls, WAN connectivity, ClearPass systems, AWS Cloud networking, and working with third-party contractors.

Key Responsibilities:

• Provide expert technical support for all wired and wireless networks and propose solutions for project-related queries.
• Analyze, plan, coordinate, and implement change requests for both existing and new network equipment, working with vendors, service providers, and internal teams.
• Assess, plan, remediate, and provide evidence for audit findings from both internal and external audits within required timelines.
• Proactively monitor bandwidth utilization and thresholds across network equipment, identifying and resolving potential issues.
• Administer daily operations of firewalls (Fortigate, Checkpoint, Cisco FTD, Palo Alto), monitor firewall rules, and review IPS logs regularly.
• Maintain and update network documentation, including wired and wireless configurations, vendor lists, escalation matrices, and disaster recovery plans.
• Maintain updated vendor contacts and supervise third-party contractors for on-site network tasks at data centers and remote sites.
• Perform troubleshooting for network cabling and wireless access points and coordinate follow-up work with maintenance contractors.
• Provide on-site technical support for Business Continuity Planning (BCP) and Disaster Recovery (DR) exercises, ensuring proper failover testing.
• Manage all WAN connections (local and overseas) and ensure that Service Level Agreements (SLAs) are met by service providers.
• Manage the ClearPass System and handle daily operations for firewalls, switches, and load balancers, including Fortigate, Checkpoint, Cisco FTD, Palo Alto, Cisco IOS, Nexus switches, and F5 Load balancer.
• Manage network devices deployed in AWS Cloud, requiring strong AWS Cloud knowledge.
• Participate in various ad-hoc projects as needed.

Requirements:

• Minimum of 5 years of experience in network administration, with in-depth hands-on experience in Cisco routers, switches, Nexus, Meraki, Checkpoint, Palo Alto, Cisco ASA, ClearPass, F5 Load Balancer, and Aruba.
• Strong knowledge of networking technologies and protocols (MPLS, IPv6, Multicast, L3VPN, BGP, OSPF, DNS).
• Hands-on experience with firewalls, switches, and load balancers.
• Knowledge of AWS Cloud networking and devices.

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.: 18S9405 / EA Reg. No.: R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

Position: Site Engineer

Specialisation: Engineer-Civil/Construction/Structural

Responsibilities:

· Ensure the construction works to comply with all the relevant regulation and special specification.

· In charge of construction submission, approval and inspection procedures in Singapore.

· Responsible for shop drawing, as-built drawing.

· Site inspection, management and coordinate on site activities.

· Ensure safety & compliance of work on site.

· Control and maintain the safe and smooth progress of the works.

· Any ad hoc duties as and when assigned by management.

Requirements:

· Diploma/Bachelor’s Degree in Engineering or related discipline

· Fresh graduate

· Able to liaise with Mandarin speaking clients.

· Experience in Bored Piling will be an added advantage

· Proficient in Microsoft Office and AutoCAD

· Candidate with bored piling experience will be preferred

· Salary base on the working experience

Company overview.

Our first company establish in china as Beijing Vibroflotation Engineering Co., Ltd. is a national first-class construction enterprise. We have branches in Hongkong (Hong Kong Geotechnical Engineering Co., Ltd). Currently, we have new companies establish in Philippines, Singapore and Israel. We are expanding our company and getting all potential projects.

Why must you join us.

Our company is stable and will get a lot of opportunity to work with projects all over the world.

Locations:

1. Tekong Camp (1 position)
2. SAFTI Camp (West) (1 position)

Salary:

• Tekong Camp: Basic: Up to S$2400
  Allowance: S$100
  Mobile: S$20
  
• SAFTI Camp (West): Basic: Up to S$2600
  

Contract: 2 years (Renewable) - No Bond
Eligibility: Locals only
Security Clearance: G50 clearance (approximately 6 months process)

Scope of Services:

• Perform asset management for infrastructure and computing devices.
• Provide computer support services, including troubleshooting, patching, configuration, testing, and maintenance for supported software and hardware.
• Collaborate with third-party vendors.
• Conduct training, coaching, and orientation for users on how to use computing devices.
• Complete assigned tasks on time and ensure user satisfaction.
• Handle helpdesk duties as needed.
• Assist the Team Leader with Windows Server patching and report extraction duties.

Requirements:

• Recognized Nitec/Diploma in Computer Science/IT or equivalent.
• At least 1 year of experience in an IT-related role.
• Technical skills and experience supporting computing devices (Windows, iOS, and Android platforms).
• Ability to work independently and without supervision.
• Strong communication skills.
• Proactive and initiative-driven.
• Ability to multitask effectively.
• Good problem-solving abilities.
• Customer service-oriented.

For interested applicant, click 'apply'

EA Reg no: R1328476
EA License No: 16C8443
EA Personnel Name: Melody
EA Personnel No: R2095899

Job Description:

• Responsible for production operation activities to ensure smooth and efficient manufacturing process

• Liaise with cross functional department on effective corrective/preventive actions, including carry out improvement activities such as process optimization, benchmarking, etc through various statistical tools and software.

• Handle audit in accordance to IATF & ISO and OHSAS requirements.

Requirements:

• Degree in Mechanical/Manufacturing Engineering or equivalent.

• Good Analytical & Problem solving skills.

• 2 years with relevant experience is an added advantage.

• Self-motivated, resourceful, action-focused and result-oriented team player.

• Knowledge on TS/IATF 16949, OHSAS18001, ISO14001, SPC, FMEA and TPM will be added advantage.

• Willing to work overtime when needed

• Require to put on jumpsuit and protective mask as Personal Protective Equipment whenever it is necessary.

Job Summary

We are looking for a meticulous QA Engineer to join our team and ensure the quality of our applications. The ideal candidate will be responsible for designing and implementing test cases, performing manual and automated testing, and collaborating closely with development teams to identify and resolve issues.

Key Responsibilities

· Develop and execute detailed test plans, test cases, and test scripts.

· Perform functional, regression, and integration testing on various applications.

· Document defects and work closely with developers to track, prioritize, and resolve issues.

· Write automated tests using tools such as Selenium, JUnit, or similar frameworks.

· Monitor and ensure test coverage, consistency, and adherence to quality standards.

Qualifications

· Bachelor’s degree in Computer Science, Software Engineering, or a related field.

· 3+ years of experience in quality assurance or software testing.

· Strong knowledge of testing methodologies, tools, and processes.

· Experience with test automation tools like Selenium, JUnit, or Appium.

· Familiarity with Agile development methodologies.

· Excellent analytical and problem-solving skills.

Preferred Skills

· Experience with performance and load testing tools like JMeter or LoadRunner.

· Familiarity with CI/CD tools and processes.

· Knowledge of programming languages such as Java, Python, or JavaScript.

Job Summary

We are looking for a meticulous QA Engineer to join our team and ensure the quality of our applications. The ideal candidate will be responsible for designing and implementing test cases, performing manual and automated testing, and collaborating closely with development teams to identify and resolve issues.

Key Responsibilities

• Develop and execute detailed test plans, test cases, and test scripts.
• Perform functional, regression, and integration testing on various applications.
• Document defects and work closely with developers to track, prioritize, and resolve issues.
• Write automated tests using tools such as Selenium, JUnit, or similar frameworks.
• Monitor and ensure test coverage, consistency, and adherence to quality standards.

Qualifications

• Bachelor’s degree in Computer Science, Software Engineering, or a related field.
• 3+ years of experience in quality assurance or software testing.
• Strong knowledge of testing methodologies, tools, and processes.
• Experience with test automation tools like Selenium, JUnit, or Appium.
• Familiarity with Agile development methodologies.
• Excellent analytical and problem-solving skills.

Preferred Skills

• Experience with performance and load testing tools like JMeter or LoadRunner.
• Familiarity with CI/CD tools and processes.
• Knowledge of programming languages such as Java, Python, or JavaScript.

The Senior Engineer is responsible for overseeing and executing projects within our EPC company, specializing in controlled environment. This role requires a strong understanding of mechanical and electrical engineering principles, project management methodologies, and the ability to provide technical leadership and support throughout the project lifecycle.

Key Responsibilities:

Project Management

• Develop and execute comprehensive project plans, schedules, and resource allocations.
• Coordinate with clients, contractors, subcontractors, and vendors to ensure timely project delivery.
• Monitor project progress, identify risks, and implement corrective actions.
• Project coordination including submission to local authorities and liaison during the construction stage
• Highlight and advise the project staff on the interfacing of mechanical and electrical services and the building works
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Ability to review the works of the engineers assigned, with the objective of compliance to local authority requirements coupled with sound engineering principals
• Implement quality assurance measures and processes.
• Coordinate testing and commissioning activities to ensure systems are operational and meet performance requirements.
• Prepare operational and maintenance manuals and as-built drawing for project handover.

Technical Leadership

• Prepare and provide technical guidance and support to site execution teams, including Architectural/MEP design, calculations, and system selection.
• Ensure adherence to design specifications, engineering standards, and regulatory requirements.
• Prepare/review/approve engineering drawings, specifications, and calculations.

Client and Stakeholder Management

• Liaise with clients and stakeholders to understand their needs and expectations.
• Develop and maintain strong relationships with clients and project partners.
• Present project updates for individual trades and progress reports to stakeholders.

Quality Assurance

• Conduct site inspections and quality control checks to ensure project compliance.

Team Management

• Lead and mentor engineers, providing guidance and support.
• Develop and maintain a positive and collaborative team culture.

Qualifications and Skill

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of experience in project engineering, preferably in the controlled environment construction industry.
• Strong understanding of MEP systems, design principles, and regulatory requirements.
• Proficiency in MS Office Suite, and CAD software (e.g., AutoCAD, Revit)
• Excellent communication, organizational, and problem-solving skills.
• Ability to work independently and as part of a team.
• Strong leadership and mentorship skills.

The Infra engineer will be required to install, configure, and operate operating system and middleware products in JBoss, Tomcat, WebSphere Application Server, Kafka, IBM-MQ, kubernetes

Responsible for the installation, configuration, administration, monitoring and daily maintenance of enterprise-wide application such as Apache HTTPd, Apache Tomcat, JBoss , Websphere Application Servers, Kubernetes, Kafka, IBM-MQ.

Interact with Software Development and infrastructure teams to define hardware requirements required to implement application solutions and troubleshoot technical issues

Interaction with business units and project managers to solve variety of business - technical issues

Interact with software, network and UNIX infrastructure administrators to seamlessly implement solutions to complex technical issues

Evaluate and select middleware technology based on application design needs proof of concept design studies

Troubleshooting web and middleware environments

Identify potential and real performance bottlenecks within web environments

Using troubleshooting methods to differentiate between an infrastructure or environment problem vs

Administration of Web environments

Advanced Web/Java troubleshooting (analyzing heapdumps, threaddumps)

Constantly update documentation as necessary to reflect system setup and environment.

To handle escalation seamlessly to avoid any gaps that may arise to meet or exceed SLA.

To utilise ITSM process and tool support.

Strong knowledge of Administrative/implementation of Linux platform and JAVA JDK/SDK products. Knowledge of implementing / managing Kubernetes, Dockers, Ansible, etc.

Good knowledge of open source cloud Platform-as-a-Service, Infrastructure-as-a Service (PaaS and IaaS) , solutions like Red Hat OpenShift Container Platform and related technologies like Docker containers and Kubernetes container orchestration

Prior experience providing enterprise-wide support, including OpenShift, private/public cloud and on-premises and systems support

Must be a Singaporean citizen due to G50 security clearance requirements by the client.

Responsibilities

• Collaborate with architects and designers to create functional, safe, and innovative structures
• Develop detailed architectural designs using CAD software
• Analyze and select appropriate construction materials
• Ensure compliance with safety regulations and architectural standards
• Test building systems and components to identify potential design improvements
• Oversee and inspect construction projects to ensure adherence to design specifications
• Prepare cost estimates for materials, equipment, and labor
• Report on project status to stakeholders regularly
• Keep updated with new design methodologies and tools

Qualifications

• Proven work experience as an Architectural Engineer or similar role
• Strong knowledge of CAD software and other architectural design tools
• Good understanding of building physics and architectural design principles
• Knowledge of construction methods and building materials
• Project management skills
• Familiarity with safety standards and building codes
• BSc degree in Architectural Engineering, Civil Engineering or relevant field
• Professional Engineer (PE) license is preferred

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge