• Review project specifications, technical clarifications and construction drawings;
• Monitor and review drawings, solve technical issues, highlight design improvements;
• Liaise with Designer on shop drawing production;
• Prepare shop drawing submission;
• Conduct technical meeting with consultants and project team on drawing issues;
• Review and approve material / finishes for submission;
• Prepare material submission;
• Perform design/installation verification on site;
• Carry out works scheduling, material requisition, cost control, project supervision and documentation;
• Architectural planning, coordination with consultants and document control such as monitoring of sample submission, approval status of drawing;
• Coordinating, organizing, and preparing construction and architectural documents and drawing;
• Supervise architectural works and coordinate with the sub-contractors and clients on architectural matters and ensure the architectural workmanship standards;
• Supervise to achieve quality of works and to comply with safety & environmental regulations;
• Supervise project activities to comply with the Company standard and project requirement
• Attend meetings with sub-contractors and prepare Minutes of Meeting;
• Ensure drawings produced by drafting team and sub-contractors are accurate and timely manner;
• Arrange and attend site inspection as per project requirement;

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

A) Installation and Maintenance of machinery and equipment eg. process piping, valves, metering pump

Conduct lesson on prescriptive and predictive maintenance on process of machinery and equipment eg. process piping, valves, metering pump and etc. Take lead on Work Health Safety training courses, material and equipment.

You should be trained in Mechanical Engineering or Mechatronics with at least 3 years of relevant practical experience in the Mechanical Engineering related sector. Possess relevant certification in Workplace Safety and Health (WSH) will be an advantage. You should also display passion and commitment for an engineering and teaching career.

B) IoT application

Design IoT application with use of sensors (vibration, heat, flowrate and etc) and gateway on engineering equipment to aggregates data for pattern analysis.

You should be trained in Mechanical Engineering or Mechatronics with at least 3 years of related working experience. Experience in IoT applications development and Industry 4.0 deployment will be an advantage. You should also display passion and commitment for an engineering and teaching career.

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

JOB DESCRIBTION:

To be able to co-ordinate and produce drawings with autocad system.

To attend site showrounds, provide tender costings and quotations as and when required.

To supervise, co-ordinate and assist your team of workers / sub-contractors to ensure smooth operations.

To attend project meetings, site safety meetings, co-ordination meetings etc., as and when required by the

project/projects.

To control and monitor all materials, claims and costs of the project/projects.

To work independently in the day to day operation of the projects and tasks assigned.

You are required to swiftly familiarize with all requirements of any task assigned.

To have close liaison and harmonious working relationship with all the colleagues and sub-contractors for the necessary smooth operation of the Company's business.

To assist and co-operate with other staff in office works including updating of datas and records, drawings etc. for ISO compliance.

You are to report to the Project Manager and Management on all the project matters.

To carry out any other related duties which may be later assigned to you by the management.

REQUIREMENTS:

Diploma or ITE in Engineering or minimum 3 years of relevant experience if he does not have the necessary paper qualifications.

Must be a team player with initiatives.

Possess sound knowledge of M&E systems especially for ACMV system.

Able to interpret Architectural, Structural and M&E drawings.

Knowledge and use of Autocad system.

JOB DESCRIPTION:

To be able to co-ordinate and produce shop drawings, details drawings, coordination drawings, as-built drawings with autocad systems and BIM modelling.

To be able to assist in job costings and estimations for quotations and tender submission.

To have close liaison and harmonious working relationship with all the colleagues and sub-contractors for the necessary smooth operation of the Company's business.

To assist and co-operate with other staff in office works including updating of datas and records, drawings etc. for IMS compliance.

You are to report to the Operation Manager (your immediate superior) and the management or any other officers who may assume their duties during their absence in the course of your work in the Company.

To carry out any other related duties which may be later assigned to you by the management.

REQUIREMENTS:

Diploma or degree in engineering with minimum 3 years of relevant drafting experience in ACMV.

Certificate in BIM Modelling (MEP Track).

Ability to work independently and cooperate as a team member.

Requires technical knowledge of the construction work involved.

To work closely with all staff and IMS compliance purposes.

Candidates are mostly preferred working / staying in singapore

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

- At least 3 years relevant experience in Built Environment sector, especially in the Civil & Structural (C&S) or Mechanical & Electrical (M&E) Engineering.

- Experience in adoption of Integrated Digital Delivery (IDD), Design for Manufacturing and Assembly (DfMA), Virtual Design & Construction (VDC), or BIM to Field in modern building projects.

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with career development opportunities to leadership positions in the Colleges or Headquarters.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

The candidate must fit the following requirements:

1) Good site management skill & required to handle various sites

2) Good knowledge in civil/structural engineering

3) Knowledge to prepare safety documents

4) Preferred recognised degree holder but experienced candidates will also be considered

5) Team player

6) Knowledge of MS office & able to prepare tender/quotation will be an advantage

As a Service Coordinator, you'll troubleshoot client issues, schedule project manpower, and track project completion. Your role is pivotal in ensuring efficient project execution, client satisfaction, and timely delivery of services.

Job Description:

1. Client Interaction:

• Engage with clients for remote troubleshooting, providing advice on servicing and maintenance issues.
• Maintain a proactive approach to client communication to enhance satisfaction and address concerns promptly.

2. Manpower Coordination:

• Assist in scheduling service technicians, ensuring proper allocation of resources for timely project completion.
• Coordinate with the Plumber, Main-contractor, or Consultant as required for seamless execution.

3. Document Management:

• Assist in document submissions and control to ensure compliance with project requirements.
• Ensure that all drawings and correspondences are accurately documented for future reference and auditing purposes.

4. Tracking and Follow-up:

• Implement a robust tracking system for service and maintenance cases to monitor progress and ensure timely resolution.
• Conduct regular follow-ups with stakeholders to address any outstanding issues and keep all parties informed.

5. Project Schedule Review:

• Review project schedules to align service activities with overall project timelines.
• Ensure timely submission of required documents to relevant authorities for approvals.

6. Collaboration with Engineers:

• Work closely with engineers during various project phases, providing necessary support and coordination.
• Facilitate effective communication between service teams and engineering departments.

7. Ad-hoc Duties:

• Undertake any other ad-hoc duties as instructed by management, contributing to the overall success of the project and team.

Requirements:

• Proficient in MS Office and AutoCAD
• Possess excellent interpersonal skills to deal with clients
• Lots of initiative and excellent organizational skills
• Must possess integrity and drive
• Good team leading skills
• Ability to make good decisions
• Preferred, At least Diploma/Degree in Engineering discipline with minimum 2 years of relevant work experience.

Working Days: 5.5 Days [Monday - Saturday]
Working Hours: 8.30am - 5.30pm

• Responsible for timely and accurate month-end closing and financial reporting to management
• Report to manager
• Support month-end closing of accounts
• Update accounting databases and spreadsheets
• Work with the sales and customer service teams to resolve billing and credit note issues.
• Ensure compliance with all finance filing requirements, tax filing requirements, audits, procedures and forms both statutory and internaL
• Performs other tasks or ad-hoc duties as assigned

Qualifications & Requirements

• Professional Certificate / NITEC, ITE, Diploma or relevant experience.
• Required skill(s): Misscrosoft office – Ms Word, Excel
• working experience and account knowledge is needed

Roles and Responsibilities:

With an in-house mentor, you will be exposed to a diverse field of knowledge and experience and be well-grounded in areas such as;

· Servicing and maintenance

· Site Acceptance Tests (SAT)

· Factory Acceptance Tests (FAT)

· Licensing of electrical installations

· High voltage switching

· Troubleshooting of electrical faults and abnormal situations

· Design & Project Work – Acting as a Qualified Person (QP), LEW for installation works, also covering areas such

as Lightning Protection, HT and LT distribution network, Earthing etc.

· Manage and lead of a team of engineers, technicians and workmen to ensure works are completed as per plan

and schedule, meeting quality & safety objectives,

· Manage and co-ordinate with clients on schedules, scope of works, on-site issues, etc,

· Attend to call-out and emergency job requests,

· Prepare incident report for completed call-out services,

· Prepare method statement and assist Professional Engineer as required,

· Other ad-hoc duties as assigned by management.

Career Progression Plan:

We invite engineering personnel who intend to embark on a career in the private sector as a hands-on electrical professional. The experience gained in this role will help candidates attain their goals of:

· Attaining of a PE Certificate,

· Attaining an LEW Grade 9 Licence (22 kV), allowing you to practise in the consumer market,

· Attaining a SP PowerGrid Authorised High Voltage Testing Engineer Licence allowing you to carry out Switchgear

Testing Works in SP PowerGrid sub-stations, and/or

· Becoming a professional and business leader - leading and managing the company's operations and business.

Job Requirements

· Minimum 5 years of related experience in electrical industry

· Possess a recognised Bachelor’s Degree in Electrical Engineering as per the Professional Engineers Act (Chapter

253)

· Good communication, interpersonal and time management skills.

· Possess strong leadership quality, team work, good planning and organizing ability.

· Takes initiative for personal and professional development.

· Due to nature of the work responsibilities, able and willing to work on weekends, public holidays, overnight and

odd hours.

· Applicants with PE and/or LEW qualifications are definitely welcome to apply

If you are ready to join us, please email your latest CV to [email protected].

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Preparation of shop drawings and relevant documents for submissions required.
• Coordinate with project team for details based on requirements from client and relevant authorities.
• Ensure all drawings are checked and approved.
• Perform other related work duties as assigned.

Requirements:

• Good interpersonal and communication skill
• Proficient in AutoCAD software (2D&3D)
• Able to work independently with responsibility and minimal oversight to meet tight deadline

*Pls kindly be informed that we are NOT accept email application, so DO NOT send your resume by email.

Take off quantities and prepare costing and budget for projects

Sourcing for sub-contractors and suppliers and negotiate price with them

Control the budget when doing procurement

Submission of progressive claims and variation of orders to client

Coordinator with sub-contractors, suppliers, consultant and other related parties

Evaluate and certify subcontractor's claim

Prepare Profit & Loss for projects

Prepare tender submissions

Proficient in quantity taking off for Builder, Architectural, M&E works.

Knowledge of Archi Finishes, detailing, M&E works system

Able to carry out measurements, tenders, procunement , R Assement

Progresive claims, liase with client, attend site show

Maintain & monitor Tender borards for Potential works

Requirements :-

At least 5 years' experience in M&E works for interior fit out is requried

Diploma in building services / Electrical / Air Conditioning or Plumbing

Ability to communicate with people at all elvel and meticulous with an eye for details

Team player yet able to work independently

Proficient in computer skills and Microsoft office is a must

Have good attitude and preferably with high level of initiative

Possess good negotiation and coordination skills

Email to [email protected]

Job Responsibilities:

• Coordinate and oversee engineering projects, ensuring timely completion and adherence to quality standards.
• Manage day-to-day operations control, optimizing efficiency and minimizing downtime.
• Collaborate with cross-functional teams to develop and implement operational strategies.
• Monitor and analyze key performance indicators to identify areas for improvement.
• Develop and maintain standard operating procedures (SOPs) for engineering and operational processes.
• Provide technical support and guidance to engineering and operations teams.
• Conduct regular audits to assess the effectiveness of operational processes and identify areas for enhancement.
• Collaborate with vendors and suppliers to ensure the availability of necessary resources.
• Evaluate and recommend new technologies or methodologies to improve operations.

Job Requirements:

• Diploma in mechanical engineering or a related field.
• Proven experience in engineering project management and operations control.
• Strong knowledge of relevant industry regulations and safety standards.
• Excellent communication and interpersonal skills for effective team collaboration.
• Analytical mindset with the ability to identify and solve complex problems.
• Proficient in project management tools and software.
• Ability to adapt to changing priorities and work in a fast-paced environment.
• Detail-oriented with a focus on quality and continuous improvement.
• Strong organizational skills to manage multiple projects simultaneously.

Roles & Responsibilities

As an Air Conditioning Repair & Servicing Technician, your main duties is to service, troubleshoot and repair air conditioning systems to ensure optimal performance and indoor air quality. This role involves diagnosing issues, performing repairs, and conducting routine maintenance to enhance system efficiency and customer satisfaction.

*Salary up to $$2,200 with variable bonus and overtime

Job Description:

· Collect the spare parts from the warehouse store based on the daily job indicated on the tablet.

· Troubleshoot and resolve issues on malfunctioned HVAC systems.

· Wash and clean all dismantled parts to improve efficiency and air quality.

· Refill refrigerants by replenishing and fixing leaks as needed.

· Communicate with clients with regards to problems in equipment and post-jobs reports.

· Ensure safe-keeping of hand tools and maintain good housekeeping.

· Must wear personal protective equipment (PPE) when necessary (e.g. googles, earplugs, respirators, safety harnesses, safety shoes, helmets, sunscreen).

· Ensure all works are carried out safely in accordance with safety procedures and practicing of Workplace Safety and Health (WSH) Act.

· Provide technical advice and assistance on all maintenance functions.

· Prepare service reports after every completed job for customer's endorsement.

· Handle any ad-hoc projects and duties assigned by reporting manager and/or management.

Job Requirements:

· Positive attitude, good interpersonal & customer-centric skills.

· No experience is also welcome to join as apprentice.

Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Job Description

In Comfort Delgro Engineering, we are a big family with different and diversed backgrounds. Be proud to share about working in one of the largest vehicle maintenance and repair workshop in Singapore. If you are looking for a lifelong career with various learning opportunities, this is the right place for you to extend your logistics and warehouse management skills and have a hands-on exposure to manage materials inventory. Calling out to detailed and sharp and individuals who would be able to share your experience and train a small team to join us and get recognized for your skills!

The company provides recognition for all our employees and be prepared to ride on a lifelong journey with us!

Come join us to enjoy the following:
-14-21 days annual leave (depending on your years of services)
-Medical insurance
-Long Service Awards
-Staff discounts (upon confirmation)
-Dental claims (upon confirmation)
-AWS

-Explore more when you join us

Job Purpose

Coordinate with the logistics team to perform logistics support and supply chain functions of the Company.

Key Accountabilities

• Ensure all movements of materials are physically accounted for and updated in system
• Accountable for inventory accuracy
• Carry out operations plans as instructed by superior
• Assist in Lean management and other Projects

Job Responsibilities & Duties

• Ensure smooth operation in all aspects of store including storage of materials and coordinating of vendors, internal parties and deliveries.
• Maintain good housekeeping, security and work safety.
• Perform transactions in SAP system.
• Manage reverse logistics (Returns, NCR- non conformity)
• Scrap management within plant (Metal, Lubs, General, Cartons)
• Conduct cycle count, annual stock take
• Reassignment to cover other branches including doing deliveries when required
• Coordinate with all branches for inter-branch store transferring
• Maintain and file all incoming and outgoing documents
• Take on ad-hoc request/projects as and when assigned by immediate supervisor

Job Requirements

• Min. 2 years of relevant work experience in Logistics, Supply Chain or Warehousing
• Education Qualification: Min O Level in any field, Diploma in Logistics and above would be added advantage
• Great sense of urgency in a fast pace environment
• Independent and has initiative
• Microsoft Office and email
• Meticulous
• Familiar with Purchasing and WMS will be an advantage for career growth
• Experience in SAP will be an added advantage
• Class 3 driver license required
• Forklift license a plus
• 5.5 working days, 44 working hours per week, subject to OT if required
• Physically abled to carry up to 9kg of heavy load

Tasks & responsibilities

• Responsibilities: Project management, coordination, implementation, execution, control and completion of specific project.
• Workout and maintain VO schedule and to final account with client / consultant.
• Raise RFI for any discrepancies.
• Attend all site, Architects & Consultants meeting.
• Responsible for site supervision and implementations.
• Monitor project costing, budget and schedule.
• Manage and planning manpower allocation.
• Manage and lead a project team to ensure site progress accordingly to project schedule.
• To solve all technical issue.
• Any other task assigned by the management

Qualifications & experience

• Degree in Mechanical Engineering or equivalent.
• At least 5 years experience in ACMV system.
• Able to handle multiple projects simultaneously. IT skills in Microsoft office, Autocad, BIM.
• Excellent leadership & interpersonal skills

Responsibilities

• Prepare bill of quantity for tendering of subcontract packages including sourcing of subcontractors/suppliers
• Handle contract negotiation with subcontractors/suppliers and prepare Subcontract Agreement
• Handle cost monitoring, adherence to contract specifications and drawings
• Prepare payment certificates of subcontractors
• Evaluate and negotiate revisions, changes and additions to contractual agreement with subcontractors
• Prepare variation orders and recouncile with the client's Quantity Surveyors in accordance to the contract agreement
• Prepare monthly progess claim to client and assist in preparation of cashflow forecast for submission to client
• Coordinate changes in plans with Design Team and review the potential variation claims to client

Requirements

• Diploma / Degree in Building / Quantity Surveying/ Civil / Structural Engineering
• Minimum 6 years of local working experience in Construction Industry
• A good team player with good initiative and positive work attitude
• Able to work independently with minimum supervision

• The Helmsman/Steersman is responsible for ferrying divers and work equipment from work jetty to work area in Singapore.
• Assist in on-site work
• Overall in-charge of boat with general housekeeping, upkeep condition and seaworthiness.
• Port Limit Steersman Certificate (Valid Manning Licence from MPA).
• Minimum five years of steerman experience in harbour crraft.

System/Network Engineer is to support infrastructure projects, ensuring schedules are in progress, requirements and scope meet and the project executes within management-defined guidelines. The role also includes communication and engagement with various stakeholders within the specific domain.

Job description

• Troubleshooting security and network problems.
• Perform vulnerability assessment using automated tools and recommend actionable follow up to remediate the vulnerabilities and/or threats uncovered.
• Provide maintenance support for security systems and tools, including firewalls and other security technologies, as per the maintenance contract requirements.
• Perform system upgrades, patches, and backups to ensure the security systems are up-to-date and running efficiently.
• Provide incident response support, troubleshoot security incidents, and work closely with end users to resolve issues in a timely resolution.
• Proactivity monitoring, support and troubleshoot network bandwidth capacity and network performance to ensure uninterrupted services.
• Manage and maintain Cisco ISE for network access control and policy enforcement.
• Coordinate and manage local and regional ISP on maintenance, changes, and implementation of WAN (SD_WAN).
• Report network operational status by gathering and prioritizing information and managing network projects.

Requirements

• Diploma or Degree in IT or Computer Science
• Min 4 years of relevant experience in IT Infrastructure and Operations Automation Experience
• Knowledge of regulatory requirements and security compliance standards relevant to network infrastructure.
• Professional Certification and at least 4 years’ hands on experience in routing & switching preferred CCNP.
• Professional Certification and at least 4 years’ hands on experience in network security preferred PCNSE (Palo Alto).
• Professional Certifications and at least 2 years hands on experience in Cyber security and optional CEH, SSCP, ISC2, Microsoft Security Fundamentals (would be an advantage)
• Any relevant Microsoft cloud security certifications (AZ-500, MS-101, MS-500)
• Good Understanding of network and security fundamentals (Concepts, Protocols. Troubleshoots).
• Experience with Windows Defender Advanced Threat Protection and latest Microsoft E5 Security Product set
• Experience in testing and evaluating Security products in a Lab environment.
• Ability to manage multiple priorities and work independently.
• Positive and professional working attitude, ability to work as a team or individual under stress with minimum supervision and deliver on tight deadlines in fast-paced environment.
• Hands on experience in one or more of the following technologies as below:
• Routing/Switching – Cisco, Meraki
• Network Security – Cisco ISE
• Firewalls/Proxy – Palo Alto, Cisco, Zscaler
• WAN – VeloCloud
• Cloud - Azure

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

• Assist the Operation Manager / Project Manager in coordinating site investigation project, planning of location, site clearances, scheduling.
• Obtaining land permission, utilities services clearances and meeting with stakeholders.
• Meeting and correspondence with Client on project timeline and requirement.
• Organizing of rigs & manpower resources for the site investigation work.

• Relevant degree/ diploma in Geology; Civil Engineering or the Built Environment.
• Familiar with Utilities Services Clearances procedure of various Agencies; and having RES/REO certificate is an advantage.
• Fresh Graduate are welcome

• Experience in developing end-to-end applications.

• Experience working in both Unix and Windows operating environments are preferred.

• Knowledge of multiple frond-end languages and libraries (e.g. React, NodeJS, Typescript and JavaScript, HTML5, CSS3).

• Knowledge with hands on experience in technologies like .Net core, Net5 above and C#

• Familiarity with databases (e.g., MySQL, Microsoft SQL) with Entity Framework.

• ICT Assessment Certification for software Developer (NUS-ISS) will be an added advantage.

• Web Servers (e.g., Apache) and UI/UX design.

• Experience in CI/CD principles

• Experience in DevSecOps architecture

• Experience of developing cloud native applications.

Tasks & responsibilities

• Responsibilities: Project management, coordination, implementation, execution, control and completion of specific project.
• Workout and maintain VO schedule and to final account with client / consultant.
• Raise RFI for any discrepancies.
• Attend all site, Architects & Consultants meeting.
• Responsible for site supervision and implementations.
• Monitor project costing, budget and schedule.
• Manage and planning manpower allocation.
• Manage and lead a project team to ensure site progress accordingly to project schedule.
• To solve all technical issue.
• Any other task assigned by the management

Qualifications & experience

• Degree in Mechanical Engineering or equivalent.
• At least 5 years experience in ACMV system.
• Able to handle multiple projects simultaneously. IT skills in Microsoft office, Autocad, BIM.
• Excellent leadership & interpersonal skills

Responsibilities:

• Responsible for sourcing new M&E projects for the company, hire necessary people and execute.
• Propose M&E projects/business plan to the board of directors and obtain necessary budget/investment approval.
• Lead all M&E related aspects of works and liaise with clients and M&E teams as necessary to facilitate contract requirements.
• Provide the planning input for the M&E works.
• Initiate and manage schedule for M&E subcontracts and designs.
• Assist in technical coordination meetings with subcontractors and project staff.
• Responsible for the as-built documents and drawings, for the performance tests, the commissioning and hand over, the snagging and snagging reports.
• Attend consultant and site meetings with the Project Team and to carry out inspections on site to ensure that the M&E works carried out by the builder to meet the desired quality/workmanship and are completed on time and within budget.
• Manage external/outsourced resources (consultants and site supervisory staff) to execute the projects.
• Ensure that contractors carry out works in a safe manner with the necessary risk assessments and workplace safety measures in place to manage project risks.
• Undertake any other tasks or responsibilities as required in the course of work.

Requirements:

• Good knowledge of Singapore standards and code of practice
• Good communication and interpersonal skills
• Able to work independently
• Target oriented in a fast-paced environment

Job Responsibilities:

• Support the Workshop Manager in managing the workshop operations and ensure all KPIs are met.
• Ensure operation costs including but not limited to material, manpower, and operating are kept within the operation budget.
• Review and enhance the existing systems without compromising quality or service while optimizing cost.
• Manage and ensure smooth day-to-day operations.
• Process statistics and writing reports, to review performance and recommend procedural enhancement for discussion
• Manage corporate fleet maintenance projects.
• Establish, implement and monitor safe working practices and procedures.
• Perform routine safety inspections on equipment and sites to ensure workshop conforms to all health & safety regulations.

Job Requirements:

• Minimum Diploma holder in Mechanical / Electrical / Electronic Engineering discipline or equivalent qualification
• Minimum two years experience in an operations environment in the Automotive Industry
• Able to build effective relationships with cross-divisional teams
• Proven tactfulness in communicating with others and constructively resolving challenges
• Excellent interpersonal and communication skills

Perform basic care and maintenance, including changing oil, checking fluid levels, and rotating tires. Repair or replace worn parts, such as brake pads, wheel bearings, and sensors. Perform repairs to manufacturer and customer specifications. Explain automotive problems and repairs to clients. Automobile mechanics typically have the following interests: Have realistic interests. They like work activities that include practical, hands-on problems and solutions.

-Experience in mechanical works of the vehicle.

-Perform accurate estimates (cost,time,effort) for repairs job

-Able to conduct routine maintenace work.

-Perform check & ensure the quality of the jobs

-Able works independent with minimal supervision

-High motivated & hard working

-Maintenence the equiment of the workshop.

-Minimum 1 years experinces.

-Prefer to have driving licence

Overview: We are seeking an experienced M&E Project Engineer to join our team. The ideal candidate will have a strong background in Mechanical and Electrical (M&E) services, including expertise in ACMV, Plumbing, Gas, Fire Protection, and Electrical systems.

Responsibilities:

Project Management:

1. Oversee Mechanical and Electrical projects, ensuring adherence to specifications and timelines.
2. Collaborate with internal team and subcontractors for seamless communication and coordination.
3. Oversee design plan execution, ensuring timely project completion.
4. Conduct site visits, address coordination issues promptly.
5. Manage project timelines, keeping all parties informed.
6. Provide technical expertise in ACMV, Plumbing, Gas, Fire Protection, and Electrical systems.

Design and Installation:

1. Collaborate on comprehensive M&E system plans and designs.
2. Supervise on-site installation and commissioning of systems.
3. Conduct testing to ensure functionality and compliance.

Documentation and Compliance:

1. Prepare detailed project documentation and maintain accurate records.
2. Enforce quality control measures and ensure compliance with safety regulations.
3. Conduct regular site inspections to verify work quality.

Client Liaison:

1. Act as the primary contact between the project team and clients.
2. Provide regular updates and address client concerns promptly.
3. Foster positive client relationships through effective communication.

Qualifications and Skills:

• Minimum 3 years of experience in M&E project engineering.
• In-depth knowledge of ACMV, Plumbing, Gas, Fire Protection, and Electrical systems.
• Strong project management skills.
• Excellent communication and interpersonal skills.
• Familiarity with relevant project management and engineering software.