Job Description & Requirements

Honing Machine setter falls under the broader career category of Grinding, Lapping, Polishing, and Buffing Machine Tool Setting, Tenders, Metals. The information on this page will generally apply to all careers in this category but may not specifically apply to this career title.

Must know Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Tenders, Metal and Plastic : Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

• Setup machine as required by drawing specifications.
• Determine product dimensions, tooling, and to plan operational sequence by studying work orders, or machining instructions.
• Make changes to machine operation when necessary.
• Select tooling to be used in machine operation, utilizing knowledge of machine and production requirements.
• Thread and hand feed materials through machine cutters or abraders.
• Inspect or measure product through the use of measuring instruments to ensure conformance.
• Hone parts to prescribed dimensions.
• Follow the company Health and Safety Policy and practice safe working habits, industrial hygiene and good housekeeping around benches and machines.
• All other duties as assigned.

Requirement:

- Min 6 Years experience in Honing Machine setting and CNC Machine setting system.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to work in Night shifts.

- Able to working at Height.

• Ability to training fresher's & operators in work area.
• Select the Tool, cutting speed & feed as per work piece materials.
• Ability of control manpower through allocating of work in a shift.
• Knowledge of Quality & Environment management systems applicable.
• Ability to prepare departmental reports production & rejection.
• All kind of threading and thread repair works .
• All races welcome...

• Senior Marine Supervisor (Piping/Thermal Insulation)

Job Scope: Execute and revise project work plans to cater to changing needs and requirements Supervise works to ensure timely completion and adhere to various standards

Liaise with clients, Managers in preparation for site work and plan schedules Keep Project Manager well informed of status of project and coordinate communications between various departments Liaise with the design specialists on drawings, amendment and re-submission to clients Assist in conducting site measurement and inspections.

Prepare and submit project documents Attend site and office meetings and prepare progress reports to study project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.

To assist in prepare piping / Thermal Insulation fabrication schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.

To prepare piping/Thermal Insulation information list and layout and document list following standard procedure created for the project. To prepare piping general specification inclusive of specification for piping & Thermal Insulation standards/drawings.

1. Supervisor ( Complete with site inspection & Measurements) in Marine field.
2. Know the Fabrication ( as per sample).
3. Knows all types of insulation and cladding fabrication knowledge.
4. Know the fitting & Installation.Coordinating and managing the staff team + specialist sub-contractor.
5. Creating and managing team schedules, issues and dispute.
6. Follow all site safety requirements to ensure the safety and wellbeing management of all stakeholder.
7. Keeping the project resourced with plant and materials.
8. Monitoring productivity and providing feedback
9. Problem-solving
10. Monitoring and controlling all aspects as needs.
11. Providing reports on works completed

Min 5 years of working experience in Shipyard Marine Industries with 3 years in supervisory role

Job Requirements: Keen to learn, possess positive attitude and able to work independently /

Driving License

Working hours: Mon to Sat: 8am to 6pm, Sat: 8am to 1pm Required to work on Shipyards / Shifts

All races welcome

Diagnose & troubeshoot all types of marine issues
Repair known or discovered issues with the highes level of quality
Maintain a clean work environment
Ability to interact with customers to explain problems and/or solutions
Attendence and TImeliness Mandatory
Notify parts for all required parts and necessary timeframes.

• Conduct basic installation of technical solutions following predefined procedures and tasks in everyday activities
• Escalate technical issues to more senior level technical specialist and supports more senior level technical specialists in complex deployments
• Perform troubleshooting, parts replacement, system upgrades and deployments
• Establish and build positive customer relationships and assure complete customer satisfaction at the assigned accounts by adherence to the following: prompt onsite arrival time, technical expertise, knowledge of customer environment, professionalism, and periodic visits as needed
• Perform part replacements as directed by the technical support lab. This includes the timely and accurate submission of all associated documentation, part return within 24 hours of the events.

Working in workshop and Anchorage vessels.

- Good time Management and work Independently.

- Good communication skills with Ship Owners and Superindents.

- Monitor the feed and speed of machines during the machining process.

- Observe and listen to operating machines or equipment in order to diagnose machine malfunctions and to determine need for adjustments or repairs.

- To perform any other duties & Responsibilities assigned by superiors from time to time.

Requirements:

- Min 5 Years experiences

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to work in Night shifts.

- Able to working at Height.

•  Select the Tool, cutting speed & feed as per work piece materials.
•  Knowledge of Quality & Environment management systems applicable.
•  Ability to prepare departmental reports production & rejection.
•  All kind of threading and thread repair works .
• All Races Welcome

Occupation

Marine Supervisor

Job Description & Requirements

• Marine Supervisor (Piping/Thermal Insulation)

Job Scope: Execute and revise project work plans to cater to changing needs and requirements Supervise works to ensure timely completion and adhere to various standards

Liaise with clients, Managers in preparation for site work and plan schedules Keep Project Manager well informed of status of project and coordinate communications between various departments Liaise with the design specialists on drawings, amendment and re-submission to clients Assist in conducting site measurement and inspections.

Prepare and submit project documents Attend site and office meetings and prepare progress reports to study project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.

To assist in prepare piping / Thermal Insulation fabrication schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.

To prepare piping/Thermal Insulation information list and layout and document list following standard procedure created for the project. To prepare piping general specification inclusive of specification for piping & Thermal Insulation standards/drawings.

1. Supervisor ( Complete with site inspection & Measurements) in Marine field.
2. Know the Fabrication ( as per sample).
3. Knows all types of insulation and cladding fabrication knowledge.
4. Know the fitting & Installation.Coordinating and managing the staff team + specialist sub-contractor.
5. Creating and managing team schedules, issues and dispute.
6. Follow all site safety requirements to ensure the safety and wellbeing management of all stakeholder.
7. Keeping the project resourced with plant and materials.
8. Monitoring productivity and providing feedback
9. Problem-solving
10. Monitoring and controlling all aspects as needs.
11. Providing reports on works completed

Min 5 years of working experience in Shipyard Marine Industries with 3 years in supervisory role

Job Requirements: Keen to learn, possess positive attitude and able to work independently /

Driving License

Working hours: Mon to Sat: 8am to 6pm, Sat: 8am to 1pm Required to work on Shipyards / Shifts

• Perform preventive and corrective maintenance on Ground Service Equipment and projects works where required
• Liaise with Stores to resolve any matters pertaining to spares
• Preparing and submitting relevant paperwork

• Nitec or Higher Nitec qualifications in Automotive (Light vehicles) / Automotive (Heavy vehicles) or equivalent
• Preferably 2 years of relevant work experience
• Class 3 driving license required
• Comfortable with working on rotating shifts
• Joining Bonus of $5000
• Terms and conditions apply

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.

As a Hardware Engineering Intern, you will get the opportunity to

• Work in a team on a range of sports product research, design, and development
• Witness products evolve from sketch to mass production
• Get hands-on with iterative prototyping and testing
• Apply technical and software skills
• Evaluate new component EOL based on R&D test plan
• Assist with analyzing and repairing Printed Circuit boards down to component level using a multimeter, oscilloscope, and other laboratory equipment.
• Using Pads Mentor Graphics for PCB Design
• Troubleshoot R&D Design product

• Pursuing Bachelor's Degree in Electrical and Electronic Engineering or relevant field
• A pro-active, organized & meticulous person who is able to work independently under a fast-paced environment
• Ability to work independently with little supervision
• Basic soldering knowledge
• Electronic hobby projects
• Ms Excel

For interested applicants, kindly submit your resume

8 – 11 Years with minimum 5 years of Java on Cloud experience preferably AWS
  Exposure to Investment Banking
 Exposure to Investment Banking. Wealth Management products/ applications
 Exposure of Money Markets, Funds, Debt Securities
 Experience of application developer in Microservices architecture
 Experience of design and build of integration components
 Experience in data structures and algorithms, design patterns and object-oriented design principles.
 Experience building highly scalable distributed systems.
 Strong skills in key J2EE technologies like Core Java, EJB, JSP, JDBC, Java Mail, XML, JAXP, JAAS, JMS, JSTL, JTA, batch
 Experience with various integration design patters (API, MQ etc.)
 Frameworks experience – Spring/Hibernate/Struts/Jasper/Quartz
 Good knowledge of Oracle
 Fully conversant on Interface design, Database design, OOAD
 Experience CI:CD process and tools like Jenkins
 Ability to work in a team/individually and handle deadlines
 Ability to execute the tasks as per the instructions or run books provided by the team lead or architect and basis requirements.
 Support system architecture, design, support cross business area.
 Ability to own end-to-end application delivery for specified projects, identifying and engaging all technical component teams.
 Ensuring project designs are compliant to architectures standards.
 Experience in self-driving the delivery/development process leading and managing a team (applicable for Senior Developers)
 Support Design, develop, implement, and maintain series of programs, subsystem, revision and enhancement of existing apps.
 Support the deployment activity as per the processes defined.
 Ensure all the prerequisites are met prior to initiating any deployment tasks. Execute rollback procedures, if required
 Troubleshoot incidents during deployment.
 Perform operational readiness tasks and ensure production acceptance criteria are met.
 Ensure functional and NFR requirements (Capacity, availability, response times, fault tolerance etc.) are delivered as agreed

Job Description

· Lead, coach and develop the precision engineering team to build a high performing and motivated team.

· Provide technical guidance and support in the design and development of medical device system and precision components.

· Develop initiatives to enhance productivity, quality/yield improvements and cost reduction.

· Continuously evaluate and improve engineering processes and workflows.

· Implement best practices, advanced manufacturing techniques and methodologies. Stay updated with the latest technologies and industry trends.

· Overseas machining projects, process and tool selection.

· Lead in equipment qualification and process validationand engineering change.

· Work closely with NPI, Quality, Supply Chain on RFQ, First Article approval and part qualification. Liaise with customer on new part development activities.

· Implement and maintain good quality processes.

· Ensure compliance with medical device industry standards and regulations.

· Coordinate with other departments to align project goals and requirements.

· Manage resources and prioritizing tasks to meet project deadlines.

· Communicate effectively with stakeholders, including board members, clients, and team members.

· Develop and manage the department's budget.

· Encourage a culture of continuous improvement and innovation

· Perform other tasks as assigned by the supervisor

Requirements:

· Bachelor’s degree in mechanical engineering or equivalent.

· Minimum 10 years’ of relevant Precision Engineering working experience.

· Good knowledge in milling tooling and machining process.

· Experienced in medical device industry is preferred.

· Strong knowledge of precision machining, metrology, and CAD/CAM software

· Familiarity with Geometric Dimensioning and Tolerancing and other precision engineering standard

· Leadership skill.

· Project Management skills.

· Listening and Communication skills.

· Problem-solving and Decision-making skills.

· People Management/Development skills.

Roles & Responsibilities

• Develop automation strategies and solutions tailored to client needs.
• Establishing communication (PROFINET, PROFIBUS, OPC, MODBUS TCP/IP,
• ETHERNET) between hardware controller, SCADA-Stations and field equipment’s.
• Design and program automation systems, including PLCs, SCADA systems, and robotic systems.
• Ensure seamless communication and data exchange between automated systems and other business applications.
• Experience in developing Control logic program, Hardware and Communication
• configuration of Siemens PLC based automation Systems. Have worked on Ladder, SCL,
• Basic STL & C-script.
• Define project scope, timelines, and deliverables in collaboration with stakeholders.
• Identify opportunities for process improvements and implement innovative automation solutions.
• Train client personnel and internal teams on the operation and maintenance of automated systems.
• Carry out Electrical, Instrumentation, Control and Automation (EICA) design for water and wastewater treatment projects.
• Manage the procurement, costing and delivery of electrical software and hardware required
• Make automation programming according to clients’ technical specifications
• Arrange control panel assembly, testing, and installation at construction site
• Modification and Integration of new equipment / system with existing automation system
• Update of SCADA/HMI graphic to reflect new instruments/equipment and mapping these graphics to the corresponding field signals
• Complete automation engineering for entire plant. PLC Control logic, SCADA Software
• Development, Testing and Commissioning, Customer support, Service and Training.
• The Control system is designed to control & monitor the motors, pumps, blowers, fans,
• diverter Valves, Slide Gates, Dampening machines, Weighers and field Instruments.
• 
  

Requirements

• Bachelor's Degree in Engineering (Electronics and Instrumentation Engineering)
• Supports the development of User Requirement Specifications (URS), Functional Specifications (FS), and Design Specifications (DS).
• Configures HMI and SCADA for production process visualization and control.
• Integrates process instrumentation (sensors, transmitters, valves) into automation systems.
• Collaborates with process engineers to optimize production processes through automation.
• Experience with Ladder Logic, Structured Text, Function Block Diagram (FBD), or other programming languages.
• Skilled in the design and configuration of HMI and SCADA systems.
• Familiar with systems such as DeltaV, Siemens PCS 7, and Rockwell Automation.
• Knowledge of sensors, transmitters, and valves, and their integration into automation systems.
• Understanding of validation processes (IQ, OQ, PQ) and GAMP guidelines.
• Ability to translate process requirements into functional specifications and understanding of critical process parameters.
• Excellent written and spoken proficiency in English.
• Minimum 5 years working experience at membrane base water treatment plant, preferably
• Well-versed with SCADA and HMI
• Excellent communication skill

We are looking for a competent and experienced security professional to join our expanding Crisis and Security Consulting practice in Singapore.

The role will involve working on various security-led projects across the South-east Asia region by providing support to Control Risks’ design team with the design deliverables.

Role tasks and responsibilities:

• Attend weekly meetings with the project stakeholders, be very attentive to details and minutes all actions that are related to our discipline.
• Deliver security design consultancy assignments ranging from simple to complex tasks.
• Drafting design stage documents such as technical specification documents, power loads calculation, tender evaluation reports, etc.
• Keep abreast with advances in security technology.
• Complete assigned tasks within the given time frames.
• Attend onsite inspections and testing & commissioning.

• Minimum of five (5) years’ experience as a security professional, or in a related field
• Capable of working with CAD 2D to a level that can deliver design layouts that match our internal standards
• A sound understanding of the design engineering elements
• Proven track record of successful security design consultancy projects, preferably within Asia or similar environment.
• A good understanding of all project design stages referred to as RIBA design stages, such as Conceptual Design, Developed Design, Technical Design, etc.
• Good knowledge and experience in design and implementation of integrated electronic security systems and physical security measures such as:

1. Video surveillance systems.
2. Access control systems.
3. Intruder detection systems.
4. Intercommunications systems.
5. Security fences, gates, barriers, locking systems, secure rooms.

• Working knowledge in the design of local security equipment rooms, main security equipment rooms and control room
• A good understanding on how to build a dedicated secure security network with considerations on network bandwidth and cybersecurity requirements
• Good knowledge and understanding of the well-known security management systems (i.e., Genetec, Gallagher and the likes)

Qualifications & Specialist Skills:

• An Engineering degree in electronics and electrical engineering /communications is preferred
• Strong communication skills – written and oral (informal and presentation to board level)
• Good skills in working with project management tools (i.e. Microsoft project or Primavera).

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Safety engineers develop procedures and system designs that protect people from illness and injury and property from damage. They combine their engineering and health and safety knowledge to ensure that machinery, furniture, and other products do not harm people or damage property. They maintain and apply their knowledge of current health and safety policies, regulations, and industrial processes and review plans and specifications of new machinery and equipment to ensure they meet safety standards.

Safety engineers identify and correct potential hazards by inspecting facilities, machinery, and safety equipment and evaluate various industrial control mechanisms’ effectiveness. They ensure buildings or products comply with health and safety regulations, paying careful attention after conducting an inspection that requires changes. They direct and oversee the installation of safety devices on machinery, and review employee safety programs, recommending necessary improvements as needed. Safety engineers need a bachelor's degree in environmental safety or engineering.

What responsibilities are common for Safety Engineer jobs?

• Perform audits and report the effectiveness of the system safety program.
• Support launch vehicle design and development to ensure that customer and internal goals for safety, mission success, and performance are met.
• Ability to develop schedules, manage budget and complete work according to the developed schedule.
• Briefing safety of the program at technical reviews and as part of the safety approval process.
• This position may include launch campaign support at remote launch sites both domestic and international.
• Exercises latitude in determine technical objectives of assignments, and make decisions and recommendations that are recognized as authoritative.
• Support incident investigations with business units, determine root causes and drive corrective actions.
• Guide successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.
• Select appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
• Work with test and tactical operating and maintenance procedures to assure the proper administrative controls are in place.
• Work across all integrated product teams and lines to properly eliminate hazards or provide effective controls.
• Implement occupational safety programs and serve as EHS interface with business units.
• Interface with software developers and systems engineers in support of verification.

Main Function:

• Project Management & Coordination.

1. Project management and coordination of Company’s products and solutions in compliance with customer specifications and deliverables resulting in direct revenue for the company and sustainable customer satisfaction.

The Role:

• Coordinate major/complex projects from order to delivery at customer site:
• Monitor the scheduling, process and delivery time of the production process.
• Manage an on time and accurate variation order in coordination with the responsible Account/Sales Manager and Field Application Engineer and the MDSC team for final approval.
• Manage completion of the project deliverables, including placing order for all materials, delivery of commissioning and installation services, progressing of PO, completion of documents, shipping requirements and invoicing.
• Continues inform customer about the status of production, make sure that changes in time schedules (delivery times) or prices are communicated and adjusted on time when necessary.

What Do You Need to Have?

• MUST possess ITE/Diploma in Electrical Engineering or Power Engineering discipline.
• Prince II certificate (preferred) will be an added advantage.
• Minimum 2 years of project management experience in engineering environment.
• Basic understanding of commercial/contract law.
• Good basic knowledge of electrical engineering processes.
• Computer literacy.
• Fluent in English.

If you think you fulfilled the job criteria above, please send your updated CV to [email protected]

We would love to hear from you! Please note that only shortlisted candidates will be notified.

Purpose of the role:

• Lead and manage all complex projects from order to delivery on customer site in order to secure price agreements, profitability margins, agreed time schedules and quality meeting customer expectations and in compliance with the business policies and strategy.

The Role:

• Lead and manage major/complex projects from order to delivery at customer site:

1. Establish a project plan in compliance with Prince II principle.
2. Be a single point of contact for the customer and internal team.
3. Manage the project deliverables.

• Monitor the scheduling, process and delivery time of the production process.

1. Confers with managers, customers and others to discuss the project status and to modify contract schedules on time when necessary.
2. Reviews contracts to determine what documentation is required for each phase of the project.

• Manage an on time and accurate variation order in coordination with the responsible Account/Sales Manager and Field Application Engineer and the MDSC team for final approval.

1. Carry out a contract review prior to acceptance of the order.

• Manage completion of the project deliverables, including placing order for all materials, delivery of commissioning and installation services, progressing of PO, completion of documents, shipping requirements and invoicing.

1. Checking drawings and technical specifications, ensure complete order files.
2. Coordinate with Service & Installation for commissioning and services, with purchasing to ensure on time delivery of material, with manufacturing to ensure production in compliance with scheduled timelines, with finance to ensure on time invoicing in accordance with agreed prices and margins.

• Continues inform customer about the status of production, make sure that changes in time schedules (delivery times) or prices are communicated and adjusted on time when necessary.

Key performance Indicators:

• On time project delivery.
• Security of forecasted profit margins.
• Accurate and on time in- and external communication.
• Customer satisfaction.
• Good internal working relationships.

Education, knowledge and working experience:

• Bachelor's Degree of Electrical Engineering or Power Engineering discipline.
• Prince II certificate (preferred) will be an added advantage.
• Minimum 6 years of experience of Project Management experience within Electrical Engineering or Power Engineering environment.
• Basic understanding of commercial/contract law.
• Good understanding of a project P&L and cash flow.
• Good basic knowledge of electrical engineering processes.
• Computer literacy.
• Fluent in English.

Personal characteristics:

• Good interpersonal and communication skills.
• Excellent organizing and planning skills.
• Real team player, ability to create enthusiasm, team spirit and to motivation among colleagues and to create long term relations.
• Proactive and assertive.
• Able to work under high pressure and meeting tied deadlines.

If you think you fulfilled the job criteria above, please send your updated CV to [email protected]

We would love to hear from you! Please note that only shortlisted candidates will be notified.

• Entry Level
• Degree holder majoring in Electrical Power Engineering
• Salary $3,300 + $280 Fixed Allowance + AWS + VB
• Location: Jurong Island (company transport provided)

The Role: As a Maintenance Engineer (Electrical), you will play a critical role in maintaining our state-of-the-art manufacturing plants. Working closely with the Maintenance Manager, you will ensure the continuous, safe, and efficient operation of plant facilities.

Key Responsibilities:

• Oversee maintenance and instrumentation activities for manufacturing plant facilities, ensuring operations run safely and smoothly.
• Coordinate and execute major field maintenance tasks, prioritizing worker safety and facility integrity.
• Collaborate with internal and external stakeholders to ensure maintenance activities are completed on schedule, minimizing disruption to plant operations.
• Conduct instrumentation application studies and modify plant facilities in line with technical specifications and business requirements.
• Organize and conduct training sessions for staff and contractors to enhance skills and competency levels.
• Implement and manage systems in compliance with ISO 9001, ISO 14001, and SS506 standards.

Qualifications:

• Bachelor’s Degree majoring in Electrical Power Engineering with good grades
• Capable in power calculation
• Basic knowledge of programmable logic controllers (PLC) and human-machine interfaces (HMI) is an advantage.

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

Triton AI Pte Ltd

Registration Number: R23118389

EA: 21C0661

Job Description & Requirements

· Develop new business opportunities and actively source for new leads

· Research, understand and identify client's needs

· Able to present and introduce services with in-depth knowledge

· Generate sales to achieve monthly sales targets

· Effectively communicate technical proposals to client

· Be responsible to all accounts under his/her control

· Assist in business development department

· Adhoc activities assigned

· Report to Sales Director

Requirements:

· At least Diploma in Business Management, Marketing, Communications, Engineering, or relevant studies

· Minimum of 1 year of relevant experience in architecture, engineering and construction industry is preferred

· Team Player; able to mingle with different types of people

· Must have strong communication skills

· Sales driven and results oriented.

Job Description & Requirements

• Prepare and amend of schematic, detailed and production drawings
• Develop solutions to solve technical & design issues as per onsite basis.
• Prepare 2D/3D CAD/BIM designs for presentations submission purposes.
• Able to compute basic technical calculations as per project requirements
• Liaising with Clients, Authorities, Consultants, Subcontractors ensure smooth coordination in project
• Attend all all technical, design and consultants meetings to understand the latest onsite requirements and ensure drawings and designs are up to date.
• Lead and mentor junior CAD/BIM colleagues
• Any other ad-hoc duties and tasks assigned by the Management/Direct Supervisor
• 
  

Job Requirements:

• To possess a Diploma or Degree in Engineering or equivalent
• At least 3 years of related working experience
• Must be proficient in AutoCAD, Revit and Navisworks

Job Description:

• Handling of Recrruitemnet an recruitment and HR-related administration duties
• Assist in HR operations
• Conducting face to face/ online interviews with prospective applicants
• Coordination of interviews
• Provide support to the HR executives and other related departments
• Handle any admin duties assigned by supervisor

Job Requirements:

• Minimum Degree in any course
• Candidates with no exp are welcome to apply

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported a revenue of over $10 billion in 2023 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Sustainability Asia Pacific Index.

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With nearly 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Details

• Maintenance and servicing of avionics systems per customer's requirements.
• Carry out component changes.
• Assist engineers in trouble-shooting and rectification
• Assist in installing and servicing avionics communications equipment.
• Inspect and test the electrical and computer systems that allow aircraft to function.
• Oversee airplane's radar system, radio communications equipment and the flight controls.
• Removal, assemble and install electrical components, and keep detailed written records of repair work performed on aircraft. (E.g. Main Battery, Emergency Battery, Starter Generator, ACW Generator, GCU, BPCU, etc.)
• Removal and installation of engine and propeller electronic controls.
• Performs components changes, tests, and adjustments on aircraft electrical avionics systems consistent with the quality standards.

Job Requirements

• Minimum O level and above, with at least 1 year of working experience as an avionics technician in the aviation industry
• Good team member with strong interpersonal skills.
• Mechanically and electrically trained on Avionics systems

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported a revenue of over $10 billion in 2023 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Sustainability Asia Pacific Index.

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With nearly 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Description

• Performs removal, installation, servicing , operational test and troubleshooting of aircraft system in mechanical trade
• Performs and documents all work performed per appropriate manuals and regulations as required

Requirement

• O level and above, with at least 1 year of relevant experience in the aerospace industry
• Ability to read mechanical engineering drawings
• Ability to effectively communicate in both written and verbal form on individual and / or aircraft status

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported a revenue of over $10 billion in 2023 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Sustainability Asia Pacific Index.

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With nearly 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Description:

• Performs aircraft sheet metal layout and template.
• Repair and modifies aircraft structural parts and repairs composite materials.
• Manufacture and repair non-in stock structural parts.
• Performs metal forming operation.
• Be able to interpret basic drawings and blueprint.
• Identify aircraft major and minor defects and prepared type of repair required.
• Fabricates related sheet metal and assemblies.
• Performs and replace plastic aircraft enclosure.

Job Requirements:

• MRO or shipbuilding industry for at least 1 years to perform structure repairs and modifications independently
• Prior working knowledge on Airbus and Boeing aircrafts like B767, B777, A320, A330 etc will be advantageous
• Strong foundation in structure hand skills and special tooling usage
• Ability to interpret engineering drawing

Knowledge to understand SRM, CMM, AMM and other engineering document

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported a revenue of over $10 billion in 2023 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Sustainability Asia Pacific Index.

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With nearly 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Responsibilities

· Perform the task of cleaning aircraft interior and exterior parts during periodic overhauls (home interior maintenance).

· Maintaining the interior cleanliness in the aircraft

· Changes lighting systems and repairing entertainment systems, seat electrical systems.

· Comprehensive knowledge of aircraft cleaning operations and activities as well as facility maintenance

· Perform the task of removing and cleaning curtains, discarding waste from the seats, and adjusting bulkheads

· Ability to perform the given tasks in high noise areas and at great heights

· Maintenance and repairing of aircraft cabins

· Maintain luggage storage area in a neat and organized manner

· Maintain inventory items required for handling the cleaning activities.

· Install cabin interior components into commercial aircraft including seat tracks, overhead bins, galleys, side panels, bulkheads, etc.

· Maintain the quality of the aircraft interiors on the operated fleet.

· Maintain the interior and exterior cleaning standards on the operate fleet.

Job Requirements

• Minimum Diploma in engineering, preferably in Aerospace or relevant certificates.
• At least 2 years of working experience in the aviation industry
• Mechanically and electrically trained (maintenance)

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported a revenue of over $10 billion in 2023 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Sustainability Asia Pacific Index.

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With nearly 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Maintenance Technician

· Performing aircraft servicing, maintenance and repair in accordance with approved maintenance data and customers' requirements.

· Ensuring that tools and equipment under his/her control are properly maintained, calibrated, and correctly used for the jobs.

· Ensuring safety rules and regulations are complied with at all times.

· Ensuring working areas are kept clean and free of all hazardous equipment

· Such other duties, as and when, assigned to him/her by the Lead Mech or Engineer.

· Subject to performance and experience, Mechanic can be appointed to as a Leadman by Dept Manager.

· Experience in Line Maintenance and Light Checks on A320, A330, B767, B777 & B787 (Preferred)

· Certification in Aviation Mechanical/Avionics trade or equivalent

Job Description & Requirements

• Prepare and amend of schematic, detailed and production drawings
• Develop solutions to solve technical & design issues as per onsite basis.
• Prepare 2D/3D CAD/BIM designs for presentations submission purposes.
• Able to compute basic technical calculations as per project requirements
• Liaising with Clients, Authorities, Consultants, Subcontractors ensure smooth coordination in project
• Attend all all technical, design and consultants meetings to understand the latest onsite requirements and ensure drawings and designs are up to date.
• Lead and mentor junior CAD/BIM colleagues
• Any other ad-hoc duties and tasks assigned by the Management/Direct Supervisor
• 
  

Job Requirements:

• To possess a Diploma or Degree in Engineering or equivalent
• At least 3 years of related working experience
• Must be proficient in AutoCAD, Revit and Navisworks