Job Description

You will design and develop electronic circuit boards for our drone systems and be part of a tight-knit team that provides safe, reliable drone systems and quality services to our distinguished customers in Singapore and around the region.

Your responsibilities will include:

• Research for solution: You will research and define efficient and reliable architecture to fulfil electronic circuit board requirements for our drone systems.
• Component sourcing: You will source suitable electronic components to implement the design architecture.
• Schematic design: You will study datasheets of the electronic components and design the schematic of electronic circuit boards that can fulfil the requirements.
• PCB design: You will design the PCB layout of electronic circuit boards and generate Gerber files for PCB fabrication.
• Firmware design: You will be responsible for firmware programming in embedded C/C++ language.
• PCB assembly test: You will test PCB assemblies thoroughly and ensure they operate as expected.
• Generation of documents and drawings: You will generate documents and drawings of design and test.
  

Requirements

The ideal candidate should have the following skills and experience:

• Bachelor's or Master’s degree in Electrical, Electronic, Mechatronics Engineering, or a field related to electronic hardware and firmware design.
• 2-3 years of industry or other relevant experience in electronic hardware and firmware design
• Experience in analog and digital circuit design.
• Experience in designing electronic circuits with microcontrollers, digital signal processors (DSPs), field programmable gate arrays (FPGAs), etc.
• Knowledge in various communication buses and protocols such as UART, I2C, SPI, CAN, etc.
• Proficient in schematic and PCB design tools such as Altium Designer, OrCAD Capture and PCB Designer, Autodesk EAGLE, etc.
• Proficient in using instruments such as multimeters, oscilloscopes, logic analysers, etc. to troubleshoot issues on electronic circuit boards.
• Proficient in C/C++ programming language.
• Strong research and problem-solving skills.
  

Job Description

The job involves the supervision of MRT projects Cross Island Line.

For those with less than the specified 3 years of relevant experience, training will be provided.

Job Requriements

RTO shall have diploma in the civil/structural discipline or National Certificate in Construction Supervision (NCCS) or equivalent and accredited by and registered with IES/ACES with minimum 3 years relevant experience in supervision deep excavation/ basement works.

- MRT experience will be an advantage.

- To assist RE & SRE to monitor all site activities

- Willing to work on night & rotation shifts

• Assist the Project Manager/ Senior Engineer on all activities that are carried out at the construction site;
• Responsible for material quantities take-off, build bill of materials;
• Assist the Commercial Department in materials procurement;
• Coordination, implementation, management of all M&E works;
• Perform quality control at construction sites;
• Check for discrepancies, defects, inconsistency in construction drawings.
• Manage and control Electrical, ACMV, Fire Protection, Plumbing & Sanitary work progress, drawings, material, samples, method statement submission and approval, to ensure quality and timely completion;
• Internal coordination with Structural and Architectural Team;
• Liaise with client’s representatives for all necessary services diversion / removal, technical issues, all necessary certificates, documents, as-built drawings

Requirements: -

• Degree/ Diploma in Mechanical/ HVAC/ Mechatronics/ Electrical/ Chemical Engineering or equivalent;
• At least 3 – 5 years working experience with basic exposure in MEP design and construction site;
• Has the vision to develop career to become registered Professional Engineer;
• Good understanding of Singapore Code of Practice and authority submission process
• Has interest to develop career in construction industry;
• Able to operate AutoCAD software, MS Excel, MS Words and MS PowerPoint, MS Project and Project related software;
• Good interpersonal and communication skills.

Career Development Provided by Company: -

• Technical/ design trainings will be provided by the company Professional Engineer to ensure engineer success at work;
• Project management training by PMI certified Project Manager;
• Company will fully sponsor and assist candidates to develop career to Professional Engineer.

OT required (payable)

Work Location:

Vehicle to be driven: 24FT Lorry/14Ft Lorry

Responsibilities

Perform transportation duties as deployed by the supervisor and carry out the duties diligently as per instructed

Transport workers and construction materials to required destination

Responsible for daily routine checks and maintain the general cleanliness of the vehicle

Run transportation errands as and when required

Any other ad-hoc duties as assigned by supervisor

Requirements

Valid class 4 driving license

Able to commit to 6-day work week and daily OT

Able to work in shifts, including overnight shifts

At least 20 year of driving experience 14FT/24FT / etc.

Familiar with Singapore roads and use of navigation apps

Drive in a safe manner at all times and adhering to traffic rules & regulations stated in the Road Traffic Act

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

14 Calendar Days

Number of Vacancies

3

Job Function

Building and Construction, Customer Service, General Work, Purchasing / Merchandising

Position Level

Executive

Minimum Years of Experience

20

Employment Type

Full Time

We are looking for an experienced and motivated Senior Electrical Engineer to join our team. In this role, you will play a crucial part in the testing, commissioning, servicing, maintenance, troubleshooting, and repair of high-tension switch gears, transformers, and low-voltage switchboards. You will collaborate closely with our team of engineers, technicians, and foremen to ensure that projects are completed on schedule and meet our rigorous quality and safety standards.

Job Description

• Carry out servicing, testing, and maintenance tasks on high-tension switchgear, transformers, low-voltage switchboards, and distribution network cables.
• Documenting all work performed, including repairs, replacements, and maintenance activities.
• Perform site management and safety checks.
• Collaborating with clients and team members to plan and execute project schedules.
• Adhering to safety protocols and ensuring compliance with electrical codes and regulations.

Requirements

• Minimum ITE/Diploma in Electrical Engineering or relevant fields of study.
• Proactive with good interpersonal skills.
• Independent and self-motivated

Core responsibilities:

• Oversee the full spectrum of accounting functions and manage full set of books for a group of companies (including review payment vouchers, sub-con payments, bank reconciliations, journal vouchers etc.)
• Supervise a team of Accounts Executives (“AE”) & Accounts Assistants (“AA”) to ensure timely and accurate month end and year end closing
• Review management reports and audit schedules prepared by AE & AA
• Prepare and submit monthly variance analysis, cash flow statements and update of order book (for assigned company and group level)
• Prepare yearly budget and half-year forecast process, budget/ forecast compilation and budget/ forecast reports for assigned company and group level
• Review /prepare quarterly GST returns (Form 5)
• To prepare year end audit (including corporate and deferred taxation computation) and liaise with external auditors
• To liaise with tax representatives for annual tax returns and estimated chargeable income (ECI), GST Assisted Compliance Assurance Programme (ACAP) submission, and prepare the necessary documents upon enquiry.
• Prepare consolidated group accounts
• Prepare draft financial statements for companies which are subjected to statutory audit and for exempt companies
• Assist in new processes and system implementation, update/ review of Accounting Financial Manual and Accounting Policies when required
• Liaise with internal business units and external parties (e.g. company secretary, auditors, bankers, tax authorities etc.)
• Any other ad hoc duties as assigned

Job Specifications

Minimum qualifications/ Experience required:

• Minimum ACCA or recognised degree in Accountancy – At least 6 years of experience in full set of accounts (audit and/or commercial)
• Intermediate to advanced skills and knowledge of Excel, as well as other Microsoft Office applications
• Experience in preparing consolidated group accounts
• Strong analytical and problem-solving skill
• Excellent interpersonal skills to communicate effectively across the organization
• Able to multi-task and prioritise work scope efficiently
• Positive attitude and resourceful, and a team player
• Highly detail-oriented

Preferred qualifications:

• Experience in construction industry
• Some supervisory experience

Job description

Take a lead role in the development of proposals and presentations for new business materials to create and nurture business opportunities and partnerships

Responsible for contract negotiation and tender presentations

Maintain relationship with clients, Attending conferences, meetings, and industry events

Coordinating and close follow up with the project team to makes sure that the projects gets done timely and contractually

Qualifications

Excellent written, communication and presentation skills

Able to work independently

Minimum 4 years of working experience

Job Responsibilities

• Support duties related to accounts payable and accounts receivable functions
• Process payment transactions accurately and efficiently
• Assist in preparation of monthly accounts schedules
• Perform monthly bank reconciliation
• Maintain monthly fixed assets listing
• Maintain good documentation and proper filing system
• Assist in audit and tax enquiries

Job Requirements

• Minimum 1 year of relevant working experience
• Possess at least Diploma in Accountancy/LCCI or relevant qualification
• Able to work independently with minimum supervision
• Well-organised with strong attention to detail
• Hands-on experience with MYOB
• Proficient in Microsoft Office (Excel, Word, Outlook)

What we offer?

• 1 Year Contract with competitive salary, bonuses and attractive benefits
• Potential conversion to permanent headcount subjected to performance
• Flexible working hours (Monday to Friday)

Job Responsibilities:

• Render all M&E Engineering support to the M&E Manager/Project Manager for the successful execution of the project.
• Liaise and coordinate with clients, consultants, consultant representative (RE/RTO), relevant authorities and sub-contractors on M&E issues and challenges.
• Coordinate with all M&E subcontractors, as well as project team structural and architectural colleagues to resolve all drawings, site discrepancy or technical issues.
• Attend all project meetings and progress meetings relating to meeting master program schedule.
• Ensure good M&E drawing management and the control of M&E documentation/filing on site.
• Ensure timely production and submission of M&E shop drawings, materials submission and method statements. All M&E shop drawings, materials and method statement are to be approved before use.
• Ensure all M&E site activities are well-planned, well-coordinated and on time.
• Oversee and guide all M&E staff/Supervisors/sub-contractors, ensuring work is carried out in accordance to the approved shop drawings, materials and method statements.
• Prepare accurate and comprehensive M&E progress report with photographs when required.
• Arrange for all M&E T&C works
• Work with Consultants to come out with proper site inspection schedule to be carried out by the relevant government authorities.
• Work closely with EHS Department to ensure strict compliance of safety regulations.

Requirements:

• Degree in Mechanical/Electrical Engineering or related disciplines
• Minimum 3 years’ experience for Main Contractor in project management and/ or site coordination works for building or civil projects
• Strong in communication skill and speak good English
• A team player

– determining job requirements and planning/configuring scaffolding

– erection of scaffolding of various types, establishing platforms and safety measures

– dismantling and removing on completion

– undertaking checking/assessing and when directed

– help to identify hazards, defects and the need for adjustment or repair; to ensure compliance with agreed codes, law, working practices and health and safety

– carry out planned tasks in accordance with contract/agreed requirements

– carry out tasks within agreed time limits

– ensure compliance to agreed codes, legislation, and procedures including health and safety

– maintain accurate records/documentation associated with your work

– immediately report problems/failures that may impact on the organisation and/or its clients/customers to Line Manager

– meet your targets and contribute to those of the team as a whole

– contribute towards the smooth running of the team

– adhere to all organisation policies and procedures

Duties of the HR & Admin Assistant include providing support to our managers and employees, assisting in daily office needs and managing our company’s general admin activities. Maintaining employee records (soft and hard copies). Updating HR databases (e.g. new hires, separations, vacation and sick leaves) Assisting in recruitment, payroll and onboarding preparation by providing relevant data, like absences, bonus and leaves.

· Handle end to end recruitment process.

· Provide support in onboarding/offboard, work pass application etc.

· Support monthly payroll processing, tax clearances.

· Handle general administrative duties.

· Participate in other ad hoc projects as and when required.

The BIM Modeler assists in project delivery, development and adoption of digital solutions and competency building.

He/She

- participates in product and model development, planning, research and/or testing of digital solutions and training.

- gathers data and information to understand business needs and user requirements to support adoption and implementation of digital and/or automated building solutions and resolves issues.

He is a team player and possesses strong communication skills to interact with relevant stakeholders and subject matter experts.

He is also resourceful and able to collate information required to develop digital solutions.

He works in a fast-paced environment and may be required to work both on- and off-site.

I. Core Responsibilities & Performance Expectations

1.Facilitate digital project delivery and collaboration

· Develop and maintain up to date Building Information Modelling (BIM) models throughout project construction period.

· Adhere to project information requirements, modelling and exchange protocols for information sharing among project stakeholders

· Follow the drawing management system (DMS) for collect required information, filling, workflow and process.

2.Documentation and Perform Project/Company BIM deliverables

· Perform standard BIM deliverables as per BEP which derived from Organization Information Requirement – OIR / Project Information Requirement – PIR.

· Perform other BIM deliverables which assigned by supervisor.

· Report daily activities and BIM progress.

3.Coordination and Drawing Production

· Follow drawing management system (DMS) for the required information collection, filling / documentation, workflow and process.

· Develop highly detail Architectural and Structural BIM model.

· Perform quality check on structural model to verify it is fit for coordination.

· Perform clash detection and document discrepancies/ clashes to discuss in weekly ICE meeting.

· Coordinate between projects BIM modellers, Project Technical Team.

· Closely work with project technical team/consultant to get resolution.

· Update model with solution provided by project technical/consultants.

· Produce Clash Free Coordinated model.

· Produce construction drawing such as Concrete Body Plan, Wall Setting Out, Tile Setting Out, General arrangement drawings.

· Adhere the committed drawing schedule and produce quality construction drawing production.

· Track and record the drawing status.

II. Job Requirements:

1.Technical Skills & Competencies

1) 3D Modelling Skills:

Use 3D modelling software to create basic three-dimensional models for equipment, components and systems

2) Building Information Modelling Application Skills:

Apply Building Information Modelling (BIM) across the project lifecycle

3) Common Data Environment Management Skills:

Recognise the use and applicability of Common Data Environment (CDE) with established CDE framework

4) Construction Technology Skills:

Acquire information on construction processes and technologies

5) Technical Drawing Skills:

Utilise instruments and digital systems to create precise drawings and specifications for development

Proficient in reading architectural and structural 2D technical drawing.

2.Critical Core Skills

1) Communication & Interpersonal Skills:

Communicate with others to share information, respond to general inquiries and obtain specific information

2) Problem Solving Skills:

Identify problems and implement guidelines and procedures to solve problems and test solutions

Educational Qualification & Working Experience

1.Diploma/ Degree in Engineering (Civil)

2.Moderate Software skill in Revit or ArchiCAD, NavisWorks or BimX, BIM 360 and BIMCloud.

3.Proficient in AutoCAD.

4.Min 2 years working experience

Desired Attributes

1.Able to multitask and work independently

2.Willing to learn attitude with good communication skills

3.Proactive, meticulous and able to meet tight deadlines

Driver :

Starting salary: $3500-$5200

OT required (payable)

Work Location:

Vehicle to be driven: 24FT Lorry/14Ft Lorry

Responsibilities

Perform transportation duties as deployed by the supervisor and carry out the duties diligently as per instructed

Transport workers and construction materials to required destination

Responsible for daily routine checks and maintain the general cleanliness of the vehicle

Run transportation errands as and when required

Any other ad-hoc duties as assigned by supervisor

Requirements

Valid class 4 driving license

Able to commit to 6-day work week and daily OT

Able to work in shifts, including overnight shifts

At least 20 year of driving experience 14FT/24FT / etc.

Familiar with Singapore roads and use of navigation apps

Drive in a safe manner at all times and adhering to traffic rules & regulations stated in the Road Traffic Act

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Core responsibilities:

· Create BIM Design / Tender Models and Documentation

· Support BIM implementation tasks on projects and facilitate project construction team with updated approved BIM information

· Build-up, regularly update and enhance BIM objective, templates and object libraries for the Company.

· Coordinate between BIM modelers, design consultants, clients and sub-contractors

· Review Design Models and Fabrication Models and Drawings

· Use BIM for coordination, sequencing, constructability

· Create construction and as built models

· Develop Virtual Mock up and 4D simulation

· Ensure Modelling Quality Control

· Follow the standards, work flows, settings and best practices that ensure delivery of high-quality consistent model and drawing output across the entire project.

· Liaise with Project Document Controller for accurate data transfer.

· Participate in regular BIM coordination review process throughout the duration of the project.

· Prepares 2D and 3D shop drawings and as-built drawings

Job Requirements:

· Relevant Diploma/Degree in Engineering (Civil), Architecture or related field

· Minimum 2 years of work experience in similar capacity

· Minimum 2 Years experience in BIM Modelling, Execution Plan, BIM Setup, Standards Development, Client Presentation and trouble shooting in related field.

· Familiar and well-versed in Revit Architecture, Revit MEP, Navisworks and BIM360

· Able to work in a team

•Prepare tender submission including Bills of Quantities.

•Preparation of tender quotations including taking-off, materials / subcontractors outsourcing and costing.

•Competent to interpret the specification and contract documents.

•Sourcing of new suppliers and subcontractors.

•Analyzing and negotiating costs in preparation of tender BQ and ensuring cost control.

•Responsible for measurement of quantities and cost estimation.

•Prepare Pre an Post Bid Tender clarfication with Consultants.

•Performs other duties as assigned

Requirements

•Degree/ Diploma in Quantity Surveying/ Mechanical/ Electrical Engineering.

•Min 2 years of relevant experience in similar industry will be an added advantage.

•Proficient in MS office applications.

•Strong analytical, communication and interpersonal skills.

•Good know how of M&E works and costing.

Interested candidates are invited to apply online with a comprehensive resume, via the APPLY NOW button below or send the resume to [email protected]

Job Description

•Assist the PM in taking over project awarded via kick-off meetings,

•Organize resources and work out the allocation of tasks to work teams and sub-contractors,

•Assist the PM with on and off site meetings pertaining to technical issues,

•Ensuring that project management tools are updated daily and documentation properly done,

•Inspect all installations and carry out inspections with Clients and Consultant's representatives,

•Conduct Testing and Commissioning (T&C) and preparing T&C reports,

•Design corrective actions to mitigate scope ad schedule creeps, and

•Assist the PM in demobilizing and handling over of projects to customer.

•Other duties as assigned.

Requirements

•Preferably with Degree in M&E Coordination / Building Services Engineering / Mechanical / Electrical;

• Candidates without the necessary academic qualification will also be considered based on project references;

•Preferably with 5 years' experience in the construction of M&E or ACMV projects.;

• Required skill(s): MS Office, MS Project, Autocad.;

Interested candidates are invited to apply online with a comprehensive resume, via the APPLY NOW button below or send the resume to [email protected]

Next available intake : After 12 Aug 2024

Responsibilities:

• CAD Modeling: Work with detailed 3D models and assemblies using industry-standard CAD software to design robotic components and systems.
• Mechanical Design: Collaborate with senior engineers to develop mechanical designs that meet project requirements, including structural integrity, functionality, and manufacturability.
• Prototyping: Assist in the prototyping and testing of mechanical components and systems to evaluate their performance and make necessary improvements.
• Documentation: Prepare technical documentation, including design specifications, drawings, and reports, to communicate design concepts and results effectively.
• Collaboration: Work closely with cross-functional teams, including colleagues on other engineering teams, project managers, and the production team to ensure seamless integration of mechanical systems within robotic platforms.
• Problem Solving: Identify and troubleshoot mechanical design issues, providing creative and practical solutions to engineering challenges.

Requirements:

• Polytechnic/University undergraduates currently pursuing diploma/degree in Mechatronics, Robotics, Mechanical, Electrical, Electronics, Computer Engineering or a related field.
• Strong interest in robotics and automation technologies.
• Strong analytical and problem-solving skills.
• Strong communication skills in English (both oral and written)
• Proficiency in CAD software, such as SolidWorks or AutoCAD
• Strong understanding of mechanical design principles and fundamentals.
• Eagerness to learn and apply new engineering concepts and technologies.
• Excellent communication and teamwork skills.
• Attention to detail and a commitment to delivering high-quality work.
• Preferred: Knowledge of materials science and manufacturing processes.
• Preferred: Experience with 3D printing and rapid prototyping.

Job Description

Delivery of goods to customers.

Loading / Unloading and moving of goods

Collect payment when necessary.

Ensure timely collection and delivery of goods.

Any other ad hoc duties as assigned.

Requirements

Class 3 driving license.

N-Level

Min 1 year working experience.

Mon - Sat : 8.30am - 5.30pm

Job description:

• Responsible for contract documentation
• Responsible for taking off measurement and preparation of tender submission
• Responsible for handling running project
• Review the subcontractor’s quotation for completeness
• Responsible for filing of respective project documents
• Assist and perform all tasks assigned by respective superior
• Ensure the return of duly signed subcontractor/supplier agreement/works order
• Other ad-hoc duties assigned by superior

Job Requirements:

• Degree / Diploma in Quantity Surveying and Building or equivalent with 2 years relevant experiences in construction or equivalent
• Process good knowledge of the market updates and construction cost trend
• Good communication and negotiable skill

Roles & Responsibilities

Job Description

• You will be working closely with Departments to manage reports and coordinate internal work
• Provide office support and ensure smooth information flow and communication among various internal and external stakeholders
• Generate detailed reports and data
• Outreach to vendors for business procurement related matters
• Forecast business related budgeting and costings
• Conduct relevant audits and reports tracking
• In charge of General Administrative duties and office maintenance matters
• Any other ad-hoc tasks as assigned

Requirements

• Candidates must have a minimum of 3 – 4 years relevant office support / business operations / administrative experience
• IT savvy and good in Microsoft Office
• Able to work independently in a fast-paced environment
• Able to communicate effectively with various departments

Operations Administrator

• Basic Salary : $2300 & above (depends on experience)
• Location: Near Tai Seng MRT (3 bus stops away)
• 5 days work (8am – 5pm)
• Min. Diploma & above
• Knowledge : Outlook, Excel, Word & Pdf
• Proficient in Chinese & English (Writing & Speaking)
• Scheduling technician's daily work
• Answering phone calls & reply emails
• Liaise with government : BCA, MOM & etc.
• Other general administrative duties (filing, update data, etc.)
• Min 1 year experience

Responsibilities

• Write good RTOS code for microprocessors
• Work independently to port algorithms onto RTOS framework for microprocessors
• Propose hardware design to fufill requirements of platform
• Interface hardware periperals and create drivers for relevant framework
• Test and deploy hardware onto company platform

Requirements

• Min 5 years of experience with robotics algorithms and optimization for deployment to resource constrained systems
• Degree in robotics or embedded systems
• C++ competency specific to RTOS on microprocessors
• Knowledge of various hardware serial interfaces and the respective means for interfacing
• Electronics engineering background

1. Understanding of electronics datasheets as well as implementation requirements
2. Designing of schematics based on requirements and datasheets
3. Integration of different circuits and electronic design

Good to have

• Master or PhD degree in robotics or embedded systems
• Prior experience with robotics algorithms and optimization for deployment to resource constrained systems
• Experience with path planning or machine learning
• Experience with biorobotics and integration

Responsibilities

• Support business operations with a secure and robust IT infrastructure.
• Develop and implement policies related to network security, disaster recovery, and IT infrastructure.
• Evaluate and recommend upgrades and improvements.
• Manage and maintain on-site MS Windows based servers.
• Manage and maintain on-site network with support from vendors.
• Direct the activities of IT staff to support end user computing needs.

Job Requirements

• Bachelor’s Degree / Diploma in Computer Engineering or equivalent field.
• Able to work independently and in a team with good interpersonal skills.
• Working experience with all or some of our IT resources (MS 365, MS BC 365, Windows Servers, VM Ware, Fortigate Network) is a plus.

Responsibilities

• Develop sophisticated applications for the Android platform.
• Engage with cross-disciplinary teams to conceptualize, design, and launch new functionalities.
• Partner with data scientists and machine learning experts to integrate deep learning models into mobile apps.
• Optimise deep learning models for peak performance and efficiency on handheld devices.
• Guarantee the robustness, quality, and responsiveness of applications.
• Pinpoint and rectify performance bottlenecks and defects.
• Uphold code integrity, organization, and automation.

Requirements

• Bachelor’s degree in Computer Science, Engineering, or a related discipline.
• 2+ years of experencie in Android development:

1. Demonstrable software and Android development skills.
2. Proficiency with Android SDK.
3. Read and write Java/Kotlin/C++ code

• Experience in handling remote data via REST and JSON.
• Familiarity with third-party libraries and APIs.
• Grasp of the entire mobile development lifecycle.
• Understanding of cloud messaging APIs and push notifications.
• Able to use code versioning tools, such as Git.
• Knowledge of continuous integration.
• Problem-solving abilities and a keeness for embracing new tech and methodologies.

Good to have

• Experience with parallel computing.
• Experience in developing uisng Google’s Flutter SDK:

1. Understanding of reactive programming and state management
2. Previous work on projects that involve hybrid app development.

• Expeirence in iOS development

1. Farmiliarity with Machine Learning frameworks (Tensorflow/PyTorch)

Roles & Responsibilities

• Coordinate and supervision of structural technical aspects of construction Supervise site building works
• Liaise with Consultants, Sub-contractors
• Handle any other ad-hoc duties and tasks assigned
• At least 5 years experience in Construction
• Know rebar and timberform work and can read drawing