· Support Construction Project Manager on subcontractors sourcing, issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.

· Clarification & confirmation of work scope.

· Coordinating and liaising with selected subcontractors to ensure they are in line with company planning and execution. To discuss and clarify the detail of scope of work, execution plan, issue resolution and technical issue resolution.

· Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.

· Handling of issued drawings to ensure latest drawings to be applied.

· Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.

· Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.

· Knowledge in steel and rebar projects.

· Overseeing quality control and health and safety matters on site.

· Identify and resolve all technical issues in Construction process.

· Need to provide technical solutions to the issues and should groom supervisors to next level.

· Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.

· Assist Construction Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.

· Prepare and submit the weekly and monthly progress/construction reports to management.

Job Description:

• Data entry
• Sorting documents and paperwork
• Checking and generation of reports
• Photocopying and scanning duties
• Filing, archiving
• Answering phone calls
• Other general admin duties

Job Requirement:

• Minimum GCE ‘O’ Level and above
• At least 2 year of working experience
• Computer literate
• Good command in written and spoken English

Proficient with all MS Office Applications

Responsibilities:

• Check/develop electrical engineering on single line diagram, equipment selection, commissioning, and handover of project
• Understand SCADA system to monitor M&E equipment migration/replacement and troubleshooting
• Organize and lead the interface review meetings with internal and external parties
• Identify critical areas and potential conflicts relating to interfaces and project budgetary
• Work with internal stakeholders and coordinate the requirements with specialist contractors to produce control logic

Requirements:

• Degree in Electrical Engineering, recognised by PEB Singapore
• At least 3 years’ experience in the operation of mechanical or MEP system
• Familiar with the electrical and mechanical systems used in a data center environment, including feeders, transformers, generators, switchgear, UPS systems, ATS/STS unit, PDU/PMM unit, chillers, air handling unit and CRAC unit
• Able to work independently and under pressure to ensure good site progress
• Good safety knowledge and attitude
• Ability to multi-task in a fast paced and dynamic environment
• Self-motivated with good organizational skills and ability to liaise with the authorities

- Organise mobilisation and demobilisation of equipment

- Organise and deployment of workers

- Monitor the site activities and project progression

- Prepare weekly and monthly progression reports

- Manage material requisition and cost control

- Keep proper documentation of all staff and work-related matters

- Update detailed reports and records of completed activities

- Attend daily meetings

- Understand AUTO CAD or BIM

- Other ad-hoc job that may be required from time to time

• Assist in the preparation of tender documentation and pricing
• To take off quantity for tender and ongoing projects
• Updating and tracking of drawing to ensure timely information
• Submission for progress claim, quotation and VO submission
• Certify and evaluate progress work done, includes contract administration for variations for both main contract and subcontract works
• Assist to finalise project accounts
• Attend site meetings when required
• Responsible for related administrative and ad-hoc duties as assigned by management

- Carry out daily supervision and coordination of all M&E implementations at site

- Understand and familiar with the contract requirement and specifications.

- Superior of M&E foreman and Supervisors and coordinate with multiple parties.

- Responsible for scheduling, planning, project supervision and documentation

- Ensure work progress meets timeline and updating of progress report

- Liase with sub-contractors and consultants on engineering details ahead of site progress

- Any other ad-hoc duties as assigned.

- More job-related scope will be brief during Interview.

• Monthly bank reconciliation: Accounts Payable & Accounts Receivable
• Timely data entry in accounting software and perform partial set of accounts and closing activities.
• Able to communicate all levels with internal colleagues or external clients.
• Assist prepare monthly reports.
• Maintain accurate master data, process invoices and payments.
• Support monthly and yearly accounts closing within the stipulated deadline.
• Any other duties assigned by Manager

- Liaise with manager on a daily basis regarding current tasks, and assist in the planning of future tasks.

- Formulate maintenance procedure and policies and facility emergency plans

Promote good relations with the stakeholders, such as the Authority staff, Landlord(s) etc.

- Liaise and coordinate with sub-contractors and ensure their maintenance works/service deliverables are completed on time and as per contract requirements and agreed KPIs.

- Submit proposal and project management services for Addition & Alteration (A&A) works; Improvements and/or Upgrading works; or Repair and Replacement works to the building, M&E Systems and facilities as and when required by the Authority.

- Manage projects and improvement works

- Coordination and monitoring of progress with manager on sites

Requirements

- Relevant degree / Diploma holder in Architecture or Engineering or Facilities Management or equivalent

- Min 3 years in (Facilities / Building and Infra Works Executives) relevant facilities management experience or equivalent

- Possess good leadership and organizing abilities

Kindly indicate your Current Salary, Expected Salary & Notice Period for further evaluation

Tasks and Duties:

• Conducting vehicle maintenance checks to ensure that trucks are in good operating condition.
• Following traffic laws and safety regulations while driving.
• Communicating with dispatchers and other staff members to coordinate pick-up and delivery schedules.
• Keeping accurate records of trucking activities, including mileage, fuel consumption, and delivery times.
• Interacting with clients, vendors, and other staff members professionally and courteously.
• Planning routes and travel schedules to ensure timely delivery of goods and cargo.
• Completing required paperwork and documentation, such as bills of lading and delivery receipts.
• Handling unexpected situations, such as traffic delays or mechanical problems, calmly and efficiently.
• Maintaining a clean and organised truck cab and cargo area.
• Loading and unloading freight using appropriate tools and equipment.

Requirements:

• Working Hours: 12 hours daily (2 break)
• Working day: 6 days weekly
• Must have valid Class 4 and/ or Class 5 Driving licence with good traffic record
• Familiar with Singapore roads and navigate with maps

Job Scope:

• Perform driving duties to and/or in clients’ place and/or across Singapore
• Plan route effectively to ensure safest route for assigned duties/ tasks
• Maintain, upkeep and cleanliness of the truck daily
• Ensure that the truck is well maintained and meet all safety requirements
• Any ad hoc duties assigned by superior

Responsibilities:

· Coordinate and Supervise project work on various site

· Manage project schedule efficiently

· Review M & E Drawings

· Follow up on drawing discrepancies

· Implement project planning, design, material requisition, cost control and documentation

· Ensure smooth progress of works on site and timely completion

· Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

· ITE/Poly/Diploma/Degree in Electrical in any engineering field

· Prior experience in interior fit out works would be an added advantage

· Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)

· Fluent in English, both written & spoken

· Independent, resourceful, pro-active and team player

· Possess good organization, planning and project management skills

· Ability to work under tight deadlines

Job Highlights

• Attractive Remuneration Package
• Opportunity for enhanced training
• Medical/Dental benefit

Job Description

Responsibilities:

• Provide general administrative support to QS/Engineering Department
• Responsible for administering and managing all income and outgoing project documents
• Support preparing documentation and reports
• Preparation of Q&M manual & Catalogue handling
• Experience in ISO, OHSAS, Compliance, document control/ filling system
• Perform other general administrative duties assigned by Superior

Requirements:

• GCE ‘O’ Level/ Diploma in Business Administration/ Engineering
• Minimum 1 year of working experience
• Computers skills – Microsoft office skill (Excel, Words, Power Point etc.)
• Must be able to communicate in English
• Excellent communication and interpersonal skills
• Analytical, meticulous, resourceful, result-driven, independent, and responsible

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Job Description:

- Involve tender preparation and submission.

- Prepare contracts, including details regarding quantities of required materials.

- To read and understand contract requirements and specifications.

- Check for discrepancy and raise tender query.

- To attend site showround at job sites to assess and project future work requirements.

- Negotiate rates with contractors and sub-contractors.

- Brief Project team after project awarded .

- Maintain proper documentation.

Requirements:

- Diploma in Building/ Quantity Surveying.

- Minimum 2 to 5 years of field experience in tendering and quotation.

- Able to work independently Team player with Positive learning and Positive working attitude.

- Able to work under tight deadline with less supervision.

Job Duties:

· Perform maintenance, testing and/or repair services of lifting equipment / hydraulic.

· Troubleshoot equipment faults and carries out preventive and/or corrective action.

· Ensure all work processes comply with quality, environmental and safety procedures and requirements.

· Planning and undertaking scheduled maintenance.

· Responding to breakdowns

· Diagnosing faults

· Supervising engineering and technical staff

· Managing budgets

· Creating maintenance procedures

· Managing stocks of suppliers and equipment

Other duties as detailed by company when necessary

Engineering Solutions Development Director - APAC

What this job involves

Leading the Engineering Solutions function for APAC

This is a Leadership role responsible for leading functional Solutions Engagement with the Geo and Product Sales Organisation in order to design an optimal, regionally and globally consistent engineering services solution for new bids. The role is the single point of contact from EO, APAC for all major regional and global bids. In order to be effective the Engineering Solutions Director will work closely with APAC EO Regional Lead and Hub leads to coordinate due diligence, scope assessments and design a locally viable and regionally scalable organisation structure and solution for new bids.

Designing best in class engineering services solutions

In this role, you will be required to:

• Provide engineering input for development of the Workplace services solutions for new bids and renewals.
• Leverage broader JLL Engineering Operations, Product and Global Ops expertise to help Solutions Development best in class solution for Workplace services bids and renewals.
• Ban active member of the Regional and Global Engineering community
• Work collaboratively with the Asia Pacific hub EO leads and Country engineers to validate scope, conduct DDs and recommend organisation structures, technology solutions and delivery solution for Engineering to bid and renewal leads in the SD organization
• Where required engage with the Global Engineering Products team in developing a solution that is scalable, consistent while being regionally viable and pragmatic.
• Support Sales and growth of Data Centre sector FM and IT services in APAC while promoting DC lifecycle products
• Develop a Scalable Organisation structure for Sales and Transition support in Engineering Operations for APAC.
• Support data centre business pursuits with divisional and regional businesses working closely with the DC Ops Lead for APAC
• Monitor market trends and changes to ensure that JLL provides industry best practice in the delivery of Engineering Services

Building strong relationships

• Build strong working relationships with Business Technology, Technology Sales, SCMP and Accounts organisation to help design a best in class engineering services solution.
• Work closely with Bid teams in development of standard and customisable Sales collateral and host it on JLL Sharepoint.
• Work closely with Engineering Sales and Transition counterparts in other regions of EMEA, AMR and LATAM for global bids.
• Implement standard business operating mechanisms such as regular team meetings, strategic review forums, training conferences and regular analysis and reporting processes to ensure team engagement and alignment and to provide an effective and efficient Engineering Solutions Development.
• Maintain effective communications with external and internal clients, technical personnel and key management

Risk Management and Compliance Leadership in the domain of CEM

• Leading the South East Asia CEM organization, the role will report into the APAC lead of Engineering Operations for the Sales element of the JD and to the Hub EO lead of South East Asia for the governance of CEM program for SEA.
• Responsible to drive operational excellence within SEA for CEM accounts focusing on operational performance/compliance
• Actively participate in Engineering Operations and CEM Board activities by attending required meetings and developing and implementing programs and procedures on a priority basis so as to support the Engineering platform and strategy.
• Position could require up to 40% travel.

Responsibilities

• Preparation of tender and contract documents including BQ
• Prepare and analyze costing for tenders
• Cost planning, estimation and measurement of quantities
• Assist in preparation of budget for M&E works
• Update M&E drawing
• Design drawing, design calculation
• Sourcing for sub-contractors and suppliers and price negotiation
• Support and tender multiple M&E projects concurrently
• Lead pre-tender meetings and brief team members’ duties during estimate preparation and submission stage
• Ensure tenders are well documented in a timely manner
• Coordinate with client and internal departments
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Mechanical/Electrical Engineering or related field
• Minimum 2 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

As a QA Technician, you’ll be an integral part of our quality assurance process, ensuring our products meet the standards of excellence.

Job Description

• Perform Failure Analysis (FA) inspection.
• Perform in-process, sub-con in-coming, out-going and standard parts inspections according to specifications, and drawings.
• To compile in-process and out-going reports.
• Ensure the quality and timeliness in delivery of testing assignments.

Requirements:

• Minimum Higher Nitec/ Diploma in any Engineering field (Mechanical, Electrical & Electronics).
• Minimum 2 years of experience in semiconductor industry with quality check experience.
• Good knowledge of OGP smart scope programming, mechanical drawing and Geometric Dimensioning and Tolerancing (GD&T).
• Basic knowledge on part surface finishing requirement (EN plating, clear anodizing, hard clear anodizing, EP, etc) and raw material (aluminum, engineering material type, etc).
• Able to use basic measuring instruments like caliper, micrometer and profile projector.
• Basic knowledge of Microsoft Excel.

Others info:

• Walking distance from Ubi MRT Station.
• Must be able to perform rotating shift.
• Salary package up to $3,500 inclusive of overtime and allowances.
• AWS + VB + Incentive.

Interested applicants are invited to apply online with a comprehensive resume, number of experiences in OGP smart scope programming, willingness for rotating shift, current and expected salaries.

Only shortlisted candidates will be notified.

Experienced operator who has handled similar machines and understand the basic materials being used.

Objectives in the role:

*Operation of machine that cuts metal sheets into specified drawings Knowledge in mechanical drawings

*Must be able to work in a team

*Able to draw 2D on AutoCAD

*Resposibilites in the role: Draw out a given sketch with measurements and information on AutoCAD. Process the drawing on laser program before cutting the material (Stainless steel / Metal / Aluminium) Check and be able to do simple troubleshooting on machine and cutting quality Maintainence of machine to not affect its function.

Job Description & Requirements

Draftsman Responsibilities:

• Following specifications and calculations to create various technical drawings.
• Preparing both rough sketches and detailed work with CADD systems.
• Performing calculations for materials and weight limitations.
• Communicating with architects and engineers, and incorporating knowledge gained into drawings.

Draftsman Requirements:

• Bachelor of Science in Engineering or Architecture.
• Degree from a technical college also acceptable.
• Experience in computer-aided design and drafting (CADD).
• Ability to draw manually favorable, but not essential.
• Ability to work well in a team and on your own.
• Ability to respond well to criticism and maintain a positive

Part Time, Freelance, Flexi-work

Work at home / office

Working duration flexible / 1 day per week.

Accounting / Taxation

Candidate must possess at least Diploma in Accountancy.

· Required Skill(s): Good PC skills and familiar with Microsoft Office, Accounting software.

· Preferably Junior Executive specialized in Finance - General/Cost Accounting or equivalent.

Responsibilities:

· Handle full sets of accounts

· Handle corporate tax admin.

· Maintenance of proper records and filing system.

· Able to work independently.

Arrange manpower deployment for service maintenance of elevators and escalators

Work scheduling

Arrange manpower and callback team for site works

Repair and major parts replacement

Testing and commissioning of elevators and escalators for new installation and modernization

Prepare field test reports

Overseeing the service operations to ensure high-quality and efficient delivery of services to our clients.

Lead a team of service technicians, manager service schedules, and maintain strong customer relationships.

Responsibilities:

• Lead and manage a team of service technicians, providing guidance, support and coaching as needed.
• Delegate tasks, set performance objectives, and conduct regular performance reviews to ensure the team meets or exceed service targets.
• Oversees all aspects of service operations, including scheduling, dispacting and monitoring service call to ensure timely and efficient resolution of customer issues.
• Coordinate with other department to optimize resource allocation and meet service demand effectively.
• Maintain accurate records of service activities, including service reports, maintenance schedules, and inventory management.
• Build and maintain strong relationships with clients by providing excellent customer service and addressing their inquiries, concerns, and feedback promptly and professionally.
• Conduct regular follow-ups with clients to ensure satisfaction and identify opportunities for service improvement.
• Utilize technical knowledge of air conditioning systems to assist service technicians in diagnosing complex issues, troubleshooting problems, and implementing effective solutions.
• Stay updated with industry trends, best practices, and technological advancements to enhance service quality and efficiency.
• Ensure that all service activities comply with safety regulations, company policies, and industry standards to minimize risks and ensure the well-being of employees and clients.
• Conduct regular safety training sessions and audits to promote a culture of safety within the service team.
• Manage service budgets effectively, monitor expenses, and identify opportunities for cost optimization without compromising service quality.
• Prepare budget forecasts, analyze financial reports, and make recommendations for resource allocation and expenditure control.

We are looking for a self-motivated and results-driven general manager to direct and manage our organization's business activities and to develop and implement effective business strategies and programs.The successful candidate for this role should possess excellent communication skills, superior knowledge of business functions, exceptional budgeting, and finance skills, and strong leadership qualities. General Manager Responsibilities • Oversee day-to-day operations, assign weekly performance goals and ensure their completion, and accomplish your own goals • Recruit, onboard, and train high-performing employees to achieve objectives for sales, profitability, and market share • Develop strategic plan for optimized productivity • Review and improve organizational effectiveness by developing processes, overseeing employees, establishing a highly motivational work environment, and implementing innovative changes • Adhere to company standards for

Responsibilities:

• Accountable for reviewing tender documents and drawings
• Accountable for quantity taking-off
• Accountable for preparing tender submissions
• Ensure timely receipt of technical information relevant to tender
• Prepare standard measurements/quantity
• Prepare the Bar Bending Schedule
• Source for quotations
• Evaluate, analyse, and input pricings for tender
• Participate in post-tender clarifications
• Participate in a kick-off meeting with Consultants/Clients
• Participate in hand-over process to project team and project briefing to colleagues
• Participate in Project Review Meetings for evaluating project process
• Prepare quotations for various technical works, material, and manpower etc.
• Check sub-contractors’ bills and get approval
• Handle Variation Orders and Claims for certification
• Perform other duties as assigned

Requirements:

• Bachelor Degree or Diploma in Civil Engineering/Quantity Survey
• Min 2 years of relevant experience in the related functions preferably in the marine construction industry

Description

• Responsible for taking over the project from tender / sales team for execution
• Prepare PEPL’s Scope of work and create project schedule based on the scope - document submission list, material submission list, material lead time, installation and testing period
• Create Document submission & Material submission list and prepare submissions
• Design & review the drawings and documents for timely submission to customer
• Monitor submissions & follow up with customer for timely approval of the documents & material submissions
• Prepare Purchase Requisitions for purchase of necessary project materials on time and coordinate with purchase team and our subcontractor / supplier
• Plan the construction site manpower requirement together with Superintendent
• Coordinate with Superintendent / Construction Manager / Site supervisor for site work activities installation, testing & commissioning and progress report
• Maintain & update Project schedule regularly and prepare Weekly / Monthly Progress report for internal & customer
• Participate in regular customer meetings & proactively manage customer expectations by preparing necessary submissions / agenda / minutes of meeting etc.
• Manage the project cost within allocated budget
• Maintain Change Order Log and proactively manage change in scope. Prepare RFI / VOR and get VO from customer before executing the scope change.
• Prepare Progress Claims timely and follow up for approval and maintain Progress Claim Summary report
• Escalate challenges / issues to the Project Manager & management to resolve it on time
• Collaborate with Customer, Consultant, Owner, Third Parties, Suppliers & internal team members for successful project execution
• Organize & coordinate for Factory Acceptance Testing (FAT) of necessary equipment
• Perform pre-punch list walk thru with PM and Superintendent
• Clearing of punch list defects in collaboration with site team
• Prepare & provide training to customer for necessary equipment (as applicable)
• Responsible to collect all Handover & completion documents
• Manage & Comply with Workplace Safety & Health for project execution
• Organize necessary safety training for the project & site team members
• Comply with the PQP document for project execution

Requirement

• Diploma/Degree in Mechanical Engineering
• More than 3 years of project management experience in related field
• Experienced in handling multiple projects
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Responsibilities:

• Accountable for reviewing tender documents and drawings
• Accountable for quantity taking-off
• Accountable for preparing tender submissions
• Ensure timely receipt of technical information relevant to tender
• Prepare standard measurements/quantity
• Prepare the Bar Bending Schedule
• Source for quotations
• Evaluate, analyse, and input pricings for tender
• Participate in post-tender clarifications
• Participate in a kick-off meeting with Consultants/Clients
• Participate in hand-over process to project team and project briefing to colleagues
• Participate in Project Review Meetings for evaluating project process
• Prepare quotations for various technical works, material, and manpower etc.
• Check sub-contractors’ bills and get approval
• Handle Variation Orders and Claims for certification
• Perform other duties as assigned

Requirements:

• Bachelor Degree or Diploma in Civil Engineering/Quantity Survey
• Min 3 years of relevant experience in the related functions preferably in the marine construction industry

Others:·

Working hours: Mon – Fri, Alternate Sat