Responsibilities:

• Report and compilation of daily maintenance and other activities of assigned station, as well as write troubleshooting reporting pertaining to a machine down time.
• Provide improvements ideas and work within the group to further improve the equipment performance.
• Report and compilation of daily maintenance and other activities of assigned station, as well as write troubleshooting reporting pertaining to a machine down time.
• Ensure minimum downtime, quick response to trouble -shoot, rectify return to production.

Requirements:

• Min Diploma in any Engineering field
• Relevant working experiences in wafer fab / semiconductor industry
• Good technical skills including problem-solving, statistical data analysis
• Able to work in a team.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Responsibilities:

1) Conceptualize all aspects of mechanical design and engineering, basis of design, scope of work, development of construction documents and execute the project with the detailed designs.

2) Assist and support the Project Manager in handling and monitoring the progress of projects to ensure that work on site is on schedule.

3) Liaise and coordinate project site works with consultants, vendors, suppliers and sub-contractors.

4) Ensure that all works carried out exceeds industry standards and are in compliance with local legislations, QHSE requirements and other regulations.

5) Arrange timely and consistent communication sessions with internal and external stakeholders.

6) Manage the detailed mechanical design of municipal scale wastewater treatment systems (if needed).

7) Assist in proposal preparation; contract preparation and negotiation; coordination with regulatory agencies; project planning, budgeting, and scheduling.

Job Requirements:

1) Degree in Mechanical Engineering or any equivalent qualification recognized by PEB.

2) Minimum 5 years of relevant working experiences.

3) Preferable possess Environmental, Water or Waste Water Engineering experiences.

4) Able to communicate clearly with people at all levels about goals, responsibility, performance, expectations, and feedbacks.

5) Manage various sub-contractors for Building services

Duties and responsibilities:

• Provide updates on Occupational Safety and Health (OHS) regulations pertaining to the Workplace Safety and Health (WSH) Act
• Implement, execute and monitor the WSH management system
• Implement Risk Management
• Investigate, analyze and determine cause of any incident, accident or dangerous occurrence during work process and recommend means of preventing recurrence
• Submit accident/incident report to Company timely
• Ensure proper upkeep of documents relevant to WSH
• Monitor OHS control measures by conducting regular audits and on-site inspections
• Liaise with consultants and enforcement agencies on WSH issues
• Perform duties of WSH Officer when required
• Other duties and responsibilities as assigned

​Requirements:

• At least a Professional Certificate/NITEC in Engineering (Environmental/Health/Safety) or equivalent
• Advanced Certificate in WSH by accredited training centre
• Knowledgeable in law and regulations of WSH Act and Environment
• Minimum 1 year of relevant work experience
• Good team player with good communication and multi-tasking skills
• MS Office skills
• Working hours: Mon - Sat

Job Description:

• Overall management and co-ordination of the project
• Serve as a single point of contact in co-ordination with and consultation with the Customer’s Representative
• Deemed as the Contractor’s agent in all dealings with the Customer, including difficult customer.
• Be accountable to the Customer as the Contractor’s agent, for all aspects of the design, development, delivery, installation, integration, migration, testing, implementation, operations and maintenance services of the system
• Co-ordinate project activities with the Customer, existing vendors and other parties as indicated by the customer
• Highlight and resolve outstanding issues and problems
• Arrange for, co-ordinate and document project progress meetings and system change management meetings
• Prepare and submit progress reports
• Prepare and submit detailed development plans and schedules
• Manage changes within project constraints, e.g. scope, resource and schedule
• Plan and allocate resources proactively to ensure timely delivery of the System in accordance with the project schedule
• Set up procedures with the Customer to manage the deployment of tools and delivery of System and Services
• Take stock and track documentation, hardware and software supplied for the delivery of systems and services
• Involve in contract administration, monitoring of progress, technical personnel training, logistic support, documentation
• Lead and manage the Contractor’s Project Team, including the overseeing of all day-to-day project activities
• Manage project risks

Job Requirement:

• Degree in Computer Science, Computer Engineering or Information Technology
• Project Management certification (PMP), if any
• Minimum 4 years of software development experience and have gone through at least 2 cycles of SDLC
• Demonstrate leadership skills and have a strong team spirit with can-do attitude
• Possess strong leadership ability, good communication skills and excellent problem-solving skills in inter-organizational environment
• Familiar with the user requirements phase for IT projects
• Experience in projects with IBM MAXIMO or sharepoint will be advantageous.

Assist engineer to maintain the existing PLC and SCADA system, and build the new system, and trouble shooting for the control system and control panel, and prepare the electrical single line drawing using AutoCAD, and coordinate with customer to understand customer's requirement. We will provide on site training, and hope the candidate willing to learn.

Duties and responsibilities:

• Provide updates on Occupational Safety and Health (OHS) regulations pertaining to the Workplace Safety and Health (WSH) Act
• Implement, execute and monitor the WSH management system
• Implement Risk Management
• Investigate, analyze and determine cause of any incident, accident or dangerous occurrence during work process and recommend means of preventing recurrence
• Submit accident/incident report to Company timely
• Ensure proper upkeep of documents relevant to WSH
• Monitor OHS control measures by conducting regular audits and on-site inspections
• Liaise with consultants and enforcement agencies on WSH issues
• Perform duties of WSH Officer when required
• Other duties and responsibilities as assigned

​Requirements:

• At least a Professional Certificate/NITEC in Engineering (Environmental/Health/Safety) or equivalent
• Advanced Certificate in WSH by accredited training centre
• Knowledgeable in law and regulations of WSH Act and Environment
• Minimum 1 year of relevant work experience
• Good team player with good communication and multi-tasking skills
• MS Office skills
• Working hours: Mon - Sat

Our client is a multinational company in the Contract Manufacuting industry. Due to their current expansion plan, they are looking for an Engineering Manager to join their Engineer team, in hopes of developing the current high performing team. They are located in the North – easily accessible.

The Engineering Manager's responsibles are:

• Supervise a team of Project Managers / Engineers when new projects are introduced into the company
• Liaise with automation projects to improve production efficiency and reduce manual labour
• Corporate with Management and relevant department to evaluate project specification
• Analyse projects in terms of feasibility, risk and challenges
• Handle and supervise automation projects to improve productivity
• Handle and plan for Project expenses to ensure costs are within set budget
• Develop and execute Programs to build and develop Engineering strength
• Liaise with training to engineering department and production staffs in relevant topics that can enhance their capabilities and knowledge

Requirement

• At least 8 years of relevant experience in Molding industry
• Minimum diploma in any discipline
• Familiar with technology for plant development
• Knowledge in Automation design and concept will be a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682
EA Personnel No: R2198636
EA Personnel Name: Oh Puey Xin

• Dismantle and disposal of existing faulty aircon equipments if require.
• Aircon equipment installation.
• Refrigerant pipe installation / brazing works.
• Wiring and termination for air-conditioned equipment.
• Equipment testing and commissioning.
• Proper disposal of refrigerants and faulty equipment.
• Relocation of aircon equipment.
• System monitoring and inspection such as operating temperature and gas pressure of aircon system.
• Aircon equipments checking and cleaning.
• Thermostat checking / control panel programming.
• Motorised valve / flow switch checking.
• Aircon equipments washing, cleaning and filter replacement.
• Condensate water pump checking and servicing.
• Vacuum drainage pipe.
• Clear secondary drain tray.

Job Description:

• To assist in tendering.
• To assist project team in all contract administrative works.
• To liaise with architects, consultants, subcontractors and suppliers in all tender and project matters.
• Any adhoc duties as assigned.

Job Requirements:

• Min. Diploma/Degree in Quantity Surveying or its equivalent.
• At least 3 years of relevant working experience in construction field especially in landed residential and condominium projects.
• Knowledge of pre and post-tenders.
• All other quantity surveying duties and responsiblities.

Job Scope:

• Ability to operate all sizes of static/ telescopic crawler cranes
• Work in compliance with safety regulations and procedures

Requirements (Qualification & Experience):

• Minimum 'N' level education
• Experienced in HDB projects would be preferred
• At least 5 years' of relevant working experience
• Must possess a valid Singapore Crane Operator License (MOM)

• Working days: Mon-Fri (8-5pm)
• Location: Gul Circle
• Benefits: AWS + VB

Job Duties

• Review the technical aspect of OCTG tenders and RFQs, and complete tender review forms.
• Review the technical aspect of contract and orders and participate in the contract review meetings.
• Conduct product testing and prepare test reports.
• Create 3D models and drawing using SolidWorks.
• Perform FE analysis using SolidWorks and Abaqus.
• Respond to technical queries.
• Lead or participate in Continuous Improvement projects.
• Other duties as assigned.

Requirements

• Bachelor’s degree in Mechancial Engineering
• 1 – 3 years of work experience (preferred)
• Experience in Oil and Gas industry (upstream)
• Intermediate skills with CAD software, eg. SolidWorks or AutoDesk Inventor.
• Trained in technical writing
• Effective communicator
• Knowledge and experience in Oil and Gas industry and API standards is preferred.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to ref29"at"trustrecruit.com.sg or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lai Jun Leong (Cedric)

EA Personnel Reg No: R21102891

Our client is a leading organisation specialised in developing Semiconductor machines. One of their divisions currently has opening for MECHANICAL DESIGN MANAGER

Responsibilities:

• Lead a team of design engineers in the design and development of semiconductor equipment from module to machine conceptualization
• Carries out CIP programs to extend product life cycle, enhance product competitiveness, improve gross margins
• Reliability and feasibility tests
• Support Technical Sales in specs review, costing and product evaluation
• Resolve all technical field issues within the Product family
• Responsible for product performance on site.

Requirements:

• Degree/Masters in Mechanical Engineering or relevant discipline
• 8-10 years of working experience in automation machine design.
• Strong technical background in semiconductor related equipment development involving ultra-high precision, high speed mechanisms
• Experienced as a Technical leader with good project management skills
• Possess good technical drawing skills using either ProE/SolidWorks
• Good knowledge in semiconductor packaging and assembly processes
• Excellent systematic problem-solving ability using DFMEA or other tools

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

[email protected]

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

Reg No: R1103523

www.rightrecruit.com.sg

• Salary: $3,500 - $4,000+
• Location: Jurong
• Monday to Friday 9am – 6pm (Friday off at 5:30pm)

Job Scopes

• Involved in daily purchasing activities
• preparation and issuance of purchase orders to suppliers
• Negotiation on pricing, credit terms and delivery schedule
• Review quotations
• Other duties assigned

Job Requirements

• Accounting / Engineering background
• Proficient and hand-on on IFS or similar software will be advantage.

Loh Suet Yan Reg No: R22108031

The Supreme HR Advisory Pte. Ltd. EA No: 14C7279

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for Project Engineer-Process to join us on a permanent basis to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Manage external vendors from the planning, design, and construction of pharmaceutical projects.
• Act as the primary point of contact for all process packages
• Collaborate closely with internal stakeholders, including process engineers to ensure facility designs meet operational requirements.
• Ensure that all pharmaceutical projects comply with relevant industry standards, including FDA regulations.
• Implement and maintain quality control measures to guarantee the accuracy and reliability of design documentation.
• Manage project budgets, resources, and timelines to ensure successful and on-time project delivery.
• Identify cost-effective solutions and optimizations while maintaining the highest quality standards.
• Build strong relationships with internal clients and external partners to facilitate successful project execution
• Must have Pharmaceutical NPI/Tech Transfer/GreenField project experience.

If you'd like to find out about this opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Benefits:

• Competitive salary, transport allowance.
• Continuous internal training.
• Career development and growth opportunities.
• Medical and insurance coverage.

Job Scope:

• Prepare project models and construction documents using BIM software.
• Establish project workflows throughout all project phases.
• BIM project set-up and continued project administration.
• Site co-ordination works.
• Prepares and update Revit Model (Co-ordination drawings).
• Prepares 2D and 3D shopdrawings and as-built drawings.
• Liaise with Project Document Controller for accurate data transfer.
• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Work with various project stakeholders to create 4D models
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Requirements:

• Must possess at least Degree/ Diploma in Electrical/ Mechanical/ Civil/ Architectural Engineering with relevant working experience in Construction industry or BIM certificate
• Minimum 5 years working experience in BIM.
• Must be proficient in BIM, Revit MEP, Bentley,AutoCad and MS Office.
• Able to read and interpret drawings.
• Good communication and interpersonal skills.
• Positive working attitude and a good team player
• Experience in adoption of BIM processes in large construction projects from tender to completion of project will be an advantage.
• Must be able to work under pressure in fast-paced community with minimum supervision, meeting project deadlines
• Able to communicate with our Chinese counterparts