Job Responsibilities:

• Reporting to Senior Tunnel Manager
• Support the tunnelling operation from geological viewpoint.
• Provide geological supervision to the tunnelling operation.
• Provide planning of additional Soil Investigation related to tunnelling works.
• Conduct face mapping to understand the ground condition for tunnelling.
• Ensure the work is done in compliant with the protocol established for the project.

Job Requirements:

• Bachelor’s Degree/ Diploma in Civil Engineering or related field.
• Experience in tunneling is mandatory.
• Experience in Rail & LTA projects is mandatory.

Requirements:

• Diploma / Degree in Mechanical Engineering or equivalent
• Must possess valid CSWIP or AWS CWI Certification
• Well versed in Microsoft Excel, Word, Powerpoint & Outlook
• Min. 3 years of relevant experience in Marine & Offshore Sector
• Well versed with FPSO / LNG / FLNG Vessels
• Subject to Client’s (Keppel Shipyard Ltd) Interview and acceptance
• Able to work at Client’s / sub-contractors’ premises
• Able to work as per Client’s instructions and satisfaction
• Project based contract

Responsibilities:

Material Inward Inspection:

• Inward inspection of Raw materials (Plate, sheet, Pipe, flange & forgings, etc) with reference to Material Test certificates as per ASME Sec II Part A & Part B
• Inward inspection of consumables (Electrodes and Shielding Gas) with reference to Batch certificates as per ASME Sec II Part C
• Check Static / Rotating equipment arrive at site shall have each equipment tag number and name plate
• Visual inspection for any damage cause during transportation

Piping:

• Fully conversant with isometrics, P&ID’s and general arrangement drawings, as built preparation & modification as per site requirements
• Fit-up & visual inspection (Dimensional Check, Alignment, Weld Visual) of pipe spools (Carbon steel, Duplex SS, Super Duplex SS, Cu-Ni, GRE) and Pipe support as per piping Isometric drawing (Weld Map) at fabrication and installation
• Involved in Line check, Hydro test, air blowing, flushing, chemical cleaning, reinstatement, bolt tightening, N2 leak test, Gross air leak test, N2 Blanketing and punch clearance
• Preparation and review of Test Packs with material and weld traceability

Structural:

• Carried out Material Inspection, Fit up, Visual Inspection
• Daily surveillance and walk about with contractor and monitor the fabrication
• Activities to comply with require quality
• Conducting Technical Tools box meeting with contactors
• Prepare the Weld Sequence prior to important structure weld
• Prepare the Punch list prior to Blasting and Painting
• Inspect and review of all QAQC relevant documents
• Witnessed all Load Tests and Documented
• Area clearance walk about and generate the Punch List
• Ensure Mechanical Devices (Like Trolley beam, Maintenance Pad eyes & Monorail) functional issues and ensure the correct tag installation
• Ensure the Safety devices were installed in correct location
• Ensure the Walk Way Path having right color and band width

Welding Engineering & Inspection:

• Preparing and maintaining Welding Procedure Specification (WPS) & Procedure Qualification Record (PQR), Welder Performance Qualification Record (WPQ) and assign unique ID to the welder as per Codes and Customer Specification
• Maintaining Welder Continuity Record
• Witness Welder qualification test (WQT) & procedure qualification test (PQR)
• Witness Mechanical test (Tensile test, Bend test, Impact test, Hardness test, Ferrite test, G48 Corrosion test, Macro & Micro structure etc,.) conducted for PQR & WQT, Ferrite Test, Positive material identification test conducted on fabricated parts. Final weld visual inspection of all fabricated product
• Pre-judgments of PWHT Joints, Witness PWHT and review PWHT charts
• Monitoring Welding parameters during WQT, PQR and Production weld
• Preparing List of Welders and Welding operators every month, Welder Evaluation Sheet, Welding Surveillance report daily and monitoring the Performance of the welder daily
• Preparing Weld Metal Consumption Calculations for special welding consumables. Raising Purchase indent with Technical Delivery Condition for special welding consumables. Monitoring stores and shop floor for proper usage of filler metals. Preparing and Monitoring of baking, holding temperature and time of filler metals as per manufacturer recommendation
• Review of WPS, PQR & WPQR submitted by vendors
• Monitoring calibration status of welding machine, inspection testing tools and pressure gauges

NDT:

• Witness NDT conducted (PT, MT, UT, PAUT)
• Radiography film Interpretation of WQT, PQR coupons and production joints
• Analysis RT repair percentage every moth and take necessary action to minimize that
• Monitoring NDE equipments calibration and periodic verification log

Insulation:

• Inspection of pipe insulation for Heat conservation, electrical tracing, cold insulation and personal protection (Material Handled: Armaflex, cellulorglass, SS)

Job Responsibilities

• Tracking project timelines, tasks, and milestones through the company's designated software system. Ensure all aspects of the project are updated, organized, and aligned with project goals, allowing stakeholders to easily access current progress reports.
• Act as the primary liaison between clients, vendors, and internal teams to clearly understand and establish the project scope, objectives, timelines, and deliverables.
• Communicate with team members to discuss project status, potential risks, and issues. Proactively address problems by finding practical and efficient solutions, ensuring the project continues to progress without delays or disruptions.
• Source for materials, services, or resources required for the project. Analyze the quotations provided by different suppliers to ensure cost-effectiveness while maintaining quality standards, helping the company to stay within budget.
• Gather data on the status of the project each week and month, summarizing key developments, completed tasks, upcoming milestones, and any potential risks. Submit these reports to relevant stakeholders to keep everyone informed and ensure transparency throughout the project's lifecycle.
• Assign specific roles, duties, and tasks to team members based on their expertise and availability. Ensure that responsibilities are clear and manageable, while also maintaining flexibility to adjust workloads if necessary.
• Manage the work of project team members, providing regular feedback on their performance. Recognize strengths, identify areas for improvement, and provide guidance and support to help the team improve and meet project goals.
• Ensure the project adheres to industry-recognized best practices and quality standards throughout its execution.
• Ensure all deliverables meet or exceed the agreed-upon quality expectations. This involves quality checks, client sign-offs, and ensuring that all project criteria are fulfilled before submission.

Requirements

• Minimum of a diploma in Civil Engineering or equivalent qualification.
• Possession of a Class 3 Driving License.
• Able to work a 5.5-day work week.
• Proficient in English, both spoken and written.
• Technical knowledge in the milling and patching works.

Job Responsibilities:

• Reporting to Senior Tunnel Manager
• Support the tunnelling operation from geological viewpoint.
• Provide geological supervision to the tunnelling operation.
• Provide planning of additional Soil Investigation related to tunnelling works.
• Conduct face mapping to understand the ground condition for tunnelling.
• Ensure the work is done in compliant with the protocol established for the project.

Job Requirements:

• Bachelor’s Degree/ Diploma in Civil Engineering or related field.
• Experience in tunneling is mandatory.
• Experience in Rail & LTA projects is mandatory.

Other Information:

To apply please click on the APPLY button to submit your resume with the following details

• Reason for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date

General foreman

Responsible for the general management and operational control of a construction site. They ensure projects are delivered on time, within budget, and safely

Supervisor

Assists the project manager in managing the day-to-day operations of a construction site. They supervise construction workers and solve disputes

Some other duties and responsibilities of a foreman include:

• Ensuring adequate manpower and resources
• Conducting quality and safety inspections
• Maintaining quality control checks
• Coordinating teams
• Solving problems
• Reporting accidents and incidents to a manager
• Assigning work to employees
• Ensuring proper care of assigned equipment
• Implementing regulations such as hazard communications
• Communicating clearly and concisely
• Recording daily work on site

Role and responsibilities:

• To prepare a smooth surface by cleaning and leveling for tiles installation.
• Will known of carefully handling of tiles cutter machine and tools.
• Tiler must be expert with practical experience.
• Good handling skils of marble tiles
• To do tiles polishing.
• To do haking and demolition work
• To do painting after completion of tile work
• To know using of tiles spacer
• Cut tiles to fit spaces and apply adhesives to secure them in place.
• Lay tiles in a uniform pattern, ensuring correct alignment and spacing.
• Fill gaps between tiles with grout and clean excess grout from the surface.
• Ensure all tiles are properly secured and finished to meet quality standards.

Requirements:

• Previous experience as a tiler or in a similar role is preferred.
• Ability to use tiling tools and equipment, such as tile cutters and grout floats.
• Good understanding of measurements and precise installation techniques.
• Must have strong attention to detail and ability to work independently.
• Ability to lift heavy materials and work in various positions (kneeling, bending).
• Good communication skills and a professional attitude.
• Must understand basic drawing.

Job Responsibilities:

• Planning and scheduling of projects.
• Manage and lead a team of supervisors, technicians and operation of assigned projects.
• Manage projects and to monitor the projects are carried out with respect to the target schedule.
• To handle design for projects and to ensure clients' requirements are met.
• To attend project meeting and to coordinate with clients, consultants, main contractors and sub contractors.
• Preparation of Progress Claim, Materials Submission, Risk Assessment, Progress Report, Shop Drawings & As Built Drawings for projects.
• To forecast and anticipate possible issue for projects and to eliminate potential risks.
• Site supervision and to liaise with supervisors and workers to ensure smooth work flow.
• Planning of manpower and work arrangement with site person in charge.
• To liaise with suppliers on procurement and delivery of materials and equipment.
• Assist in settlement of project final account including variation orders.

Roles and Responsibilities

• To construct model and prepare shop drawings for submission to the authorities and for construction.
• Update model according to latest information provided and ensure accuracy of shop drawings.
• To develop design drawings using AutoCAD.
• Monitor and conduct clash-detection and conflict resolution for Project Design Team.
• Achieve the drawing submission schedule.
• To coordinate, communicate with clients and execute project on site independently.
• Good level of communication and teamwork with different individuals representing multiple disciplines to achieve optimum building information modelling (BIM) performances.

Qualification Requirements

• Candidate possesses at least a GCE ‘O’ Level certificate.
• Proficient in AutoCAD.
• Minimum 5 years of relevant experience.

Preferred Skills

• Proficient in Revit Archi, Mechanical, Electrical, Plumbing (MEP), Microsoft Office and building information modelling (BIM).
• Able to adapt to construction site environment.

Description

• Responsible for taking over the project from tender / sales team for execution
• Prepare PEPL’s Scope of work and create project schedule based on the scope - document submission list, material submission list, material lead time, installation and testing period
• Create Document submission & Material submission list and prepare submissions
• Design & review the drawings and documents for timely submission to customer
• Monitor submissions & follow up with customer for timely approval of the documents & material submissions
• Prepare Purchase Requisitions for purchase of necessary project materials on time and coordinate with purchase team and our subcontractor / supplier
• Plan the construction site manpower requirement together with Superintendent
• Coordinate with Superintendent / Construction Manager / Site supervisor for site work activities installation, testing & commissioning and progress report
• Maintain & update Project schedule regularly and prepare Weekly / Monthly Progress report for internal & customer
• Participate in regular customer meetings & proactively manage customer expectations by preparing necessary submissions / agenda / minutes of meeting etc.
• Manage the project cost within allocated budget
• Maintain Change Order Log and proactively manage change in scope. Prepare RFI / VOR and get VO from customer before executing the scope change.
• Prepare Progress Claims timely and follow up for approval and maintain Progress Claim Summary report
• Escalate challenges / issues to the Project Manager & management to resolve it on time
• Collaborate with Customer, Consultant, Owner, Third Parties, Suppliers & internal team members for successful project execution
• Organize & coordinate for Factory Acceptance Testing (FAT) of necessary equipment
• Perform pre-punch list walk thru with PM and Superintendent
• Clearing of punch list defects in collaboration with site team
• Prepare & provide training to customer for necessary equipment (as applicable)
• Responsible to collect all Handover & completion documents
• Manage & Comply with Workplace Safety & Health for project execution
• Organize necessary safety training for the project & site team members
• Comply with the PQP document for project execution

Requirement

• Diploma/Degree in Electrical Engineering or related studies
• More than 3 years of project management experience in related field
• Experienced in handling multiple projects
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Job Description

•Assist the Project Manager in the daily execution of work

•Ensure that the works are carried out in accordance with the Project Quality & Safety Plan, contract requirements, including drawings and specifications

•Monitor, control and coordinate site works with the operations team as well as instrumentation contractors and consultants

•Establish and implement controls to ensure that works are carried out safely according to the works programme and produce short term works plans

•Prepare bored piling drawings and soil investigation reports for bored piling work

•Check geotechnical parameters for bored pile installation

•Ensure that all corrective action and preventive action are implemented effectively and quality records are properly maintained

•Monitor and control progress to ensure that turnover and cost is in line with master construction programme

•Ensure material submission & approval, order and delivery are according to agreed schedules

•Prepare AutoCAD, shop, and as built drawings

Requirements

•Degree in Civil Engineering/Geology, recognized by Professional Engineers Board (PEB) Singapore

•At least 3 years’ experience with extensive experience in bored piling projects

•Have experience in rock fissure and base grouting processes

•Familiar with local codes and regulations, as well as submission procedures

•Well versed in structural and geotechnical design software packages and technology

•Proficient in Microsoft Office, design software and analytical tools e.g. MicroStation, Praxis, STAAD.Pro, Prokon, etc

•Excellent team player, good interpersonal skills and a “can-do” attitude

•Strong negotiation, planning and analytical skills

•Ability to multi-task in a fast paced and dynamic environment

About ST Engineering

ST Engineeringis a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Unmanned & Integrated Systems

Our Unmanned & Integrated Systems business offers holistic solutions in system engineering and integration. We pioneer maritime robotics and autonomy solutions, provide system integration for complex naval and island air defence System-of-Systems (SoS), and take care of the operation and maintenance of Command, Control, Communications, Computers Intelligence (C4I) systems. We cater to the needs of Defence, Public Safety & Security, and Commercial clients worldwide, providing seamless and innovative services that redefine possibilities.

Together, We Can Make A Significant Impact

You will work closely with other engineers, Service Delivery Managers (SDM) and Project Managers to deliver quality network maintenance services to our customers.

Be Part of Our Success

• Carry out maintenance works (servicing, repair, overhaul) on customers' operational systems.
• Perform troubleshooting and corrective maintenance work safely.
• Supervise sub-contractors to ensure high quality of work and compliance with safety work procedures.
• 24/7 standby for maintenance support when rostered.
• Other duties as assigned by Department Manager and SDM.

Qualities We Value

• Individuals with deep experience in generator, cooling and hydraulic systems maintenance may apply.
• Basic knowledge in computer networking or IT systems an advantage.
• Team player.
• Able to work independently.
• Able to work under pressure with good time management skills.
• Good written and verbal communication.
• Good interpersonal skills (interaction with customers at site will be required).
• Knowledge of SAP system an advantage.
• Singaporean only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working Location: Sembawang (may be deployed to other camp sites)

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Unmanned & Integrated Systems

Our Unmanned & Integrated Systems business offers holistic solutions in system engineering and integration. We pioneer maritime robotics and autonomy solutions, provide system integration for complex naval and island air defence System-of-Systems (SoS), and take care of the operation and maintenance of Command, Control, Communications, Computers Intelligence (C4I) systems. We cater to the needs of Defence, Public Safety & Security, and Commercial clients worldwide, providing seamless and innovative services that redefine possibilities.

Together, We Can Make A Significant Impact

You will be responsible for the maintenance of electronics systems onboard surface vessels and shore facilities. You will work closely with other engineers, Service Delivery Managers and Project Managers to deliver quality maintenance services to our customers. You will have opportunities to be short-listed for participation in short-term overseas attachment and training courses. You will have opportunities to manage maintenance operations at team, or workshop level.

Be Part of Our Success

• Work with the Superintendent to upkeep the systems onboard the naval platforms at the highest state of availability and readiness.
• Perform maintenance tasks onboard vessels, workshop and shipyards
• Perform defect troubleshooting on systems
• Perform installation/removal work for equipment/systems
• Perform refurbishment of electronics unit/assemblies

Qualities We Value

• Knowledge in Engineering or equivalent
• Naval related maintenance training certifications would be advantageous
• Good working knowledge and experience working on-board commercial and military vessels on underwater, mechanical / electronics / electrical systems
• Good working knowledge and experience on computer software (words, excel).
• Understanding maintenance regime and basic experience in troubleshooting system till card level
• Able to work well in a team and independently as when required.
• Able to work with challenging customers.
• Able to work outdoors and onboard naval platforms.
• Able to sail for up to a week if required.
• Singaporean only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Location: Changi (Site)

*shuttle bus service available at selected MRT station

• Possess a Diploma / Nitec in Engineering
• No Exp Are Welcome To Apply - Training Will Be Provided
• Able to work on 2 rotating shift including weekends & PHs

Job Scope:

• To monitor the performance of the equipment using the Monitoring Control Console (MCC) workstations
• Perform remote troubleshooting when required to
• Compile data and generate fault related reports
• Assist in systemwide software deployment activities
• Monitor performance of the systems post software deployment for potential faults/issues
• Generate backend reports for investigation purposes
• Create Work Orders in the Maintenance Management System (MMS) to record details of fault troubleshooting
• Support in all systems and MCC workstation related tasks
• Perform any other duties as assigned

Requirements:

• Possess a Diploma / Nitec in Engineering
• Possess some technician experience is advantageous
• No experience are welcome to apply- Training will be provided
• Proficient in MS Office (especially in Excel)
• Able to work on 2 rotating shift, on Weekends & PHs

Other Information:

• Working Hour: 5 Days Rotating Shifts including Weekend & PH (7am to 4.30pm / 1pm to 10pm)
• Salary: Up to $2800 + AWS + VB
• Location: Macpherson

To apply please click on the APPLY NOW button or email your resume to [email protected] with the following details inside your resume for faster processing:

• Reason for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Yoong Poh Feng

EA License | 14C7092

EA Registration Number | R1105076

HR Assistant

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday to Friday 8.30am to 6pm.
• Salary Range: S$ 2,500 - 2,800

Job Description:

• Lead end-to-end recruitment: sourcing, interviews, reference checks and employment offers.
• Establish partnerships with internal/external sourcing channels for timely/cost-effective hiring.
• Review/adjust recruitment strategies regularly.
• Manage graduate hire programs, internships, job fairs.
• Update internal databases with new hire information.
• Prepare HR documentation for employee files.
• Prepare HR metrics reports (hires by department).
• Ensure compliance with company policies/procedures and legal requirements.
• Administer employee benefits (enrolments, changes, terminations).
• Coordinate employee events/training sessions/team building/recognition programs.
• Perform ad-hoc duties as assigned.

Requirements:

• Diploma or Degree in HR or related field preferred
• 2 years of experience in HR and administrative support roles
• Proficiency in MS Office applications, including Excel, Word, and PowerPoint
• Knowledge of HRIS and payroll software is preferred

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Job Scope:

• Oversee the design, procurement, and installation of M&E systems
• Lead and supervise M&E engineers, contractors, and subcontractors
• Liaise with clients, consultants, contractors, and suppliers to ensure project requirements are met
• Ensure M&E work meets industry standards, codes, and safety regulations
• Monitor project budgets, manage expenses, and control costs
• Identify potential risks related to M&E systems and implement mitigation strategies
• Maintain accurate records of contracts, designs, and project progress
• Address and resolve technical or logistical issues during the project lifecycle
• Ensure compliance with local regulations, building codes, and environmental standards
• Provide regular progress reports and status updates to stakeholders
• Ensure projects are delivered on time, within budget, and to the required quality standards
• Conduct regular site inspections to monitor work progress and quality assurance

Requirements:

• Degree/Diploma in Mechanical or Electrical Engineering
• Minimum 5 years of experience in the construction industry
• Must have M&E industry experience
• Strong analytical skills and ability to work independently
• Excellent project control and people management skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

We are looking for a Mechanical Engineering Technician to support the installation, testing, and maintenance of lifts and escalators, as well as interior system integration. The role involves assisting in mechanical installations, performing quality checks, troubleshooting issues, and ensuring compliance with safety and operational standards.

Job Responsibilities:

• Plan, schedule and achieve workshop maintenance production for GSE and/or vehicles
• Manage in-house workforce, and/or outsourced contractor production/shift supervisors, and shift planning

Requirements:

• Minimum Diploma in Engineering
• Able to read, write and communicate in English
• Comfortable with shift work

Qualified or interested candidate, kindly click apply below or email us a copy of your resume in MS Word format to: [email protected]

Kindly indicate the following details in your resume:

1. Current and Expected salary
2. Reason for leaving for current and previous employment
3. Earlier availability date
4. Position that you are applying for

We regret that only shortlisted candidates will be notified.

However, rest assured that all applications will be updated to our resume bank for future opportunities/references.

EA License No: 08C2822

Bizhub Asia Pte Ltd

Our client is a well-established MNC, market leader in the Engineering industry. They are looking for a Senior HR Executive to assist their team for the next phase of their business. They are located in the West area – easily accessible.

Responsibilities:

• HR functions and general admin support
• Process monthly payroll
• Recruitment and Selection
• Follow strict compliance with data protection regulations.
• Adhere to all Personal Data Protection Act (PDPA) guidelines, ensuring compliance company requirements.
• Manage employment benefits in a sustainable manner by utilizing government support programs where appropriate, balancing employee expectations with organizational needs.
• Collaboration with Managers address manpower requirements
• Support HR policies and provide training initiatives to enhance skills and workforce development.
• Promote a culture of continuous improvement by sustaining the 5S methodology in daily operations.
• All other ad hoc duties as assigned

Requirements:

• Minimum Diploma in HR or other relevant field of studies
• Minimum 4 years of relevant experiences

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R23115674 (Chong Jia Jia)

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a CQV Planner/Scheduler to join us on a short term contract to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Project planner to oversee and manage the entire Planning/Scheduling for Brownfield Project.
• Knowledgeable in resource planning.
• Well-versed with Microsoft Excel/Primavera P6 and is able to ensure that all project delays are accounted for and reported accordingly
• Must be well versed in planning commissioning, qualification and validation.

We are only considering candidates currently in Singapore.

Candidates who are available on short notice will be preferred.

If you'd like to find out about this opportunity, please forward your CV to Sruthi ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

1. lifting and moving materials around a construction site as safely and efficiently as possible.
2. Conducting machine safety checks each day.
3. Work in compliance with safety regulations and procedures.
4. Prepare and update daily log of material transportation which includes the position of materials and type of materials.
5. Present the day to day report to the Site Supervisor and Project Engineer.
6. Employ levers, pedals, and buttons efficiently.
7. Ensure all loads are in accordance with crane limits.
8. Assemble and set up crane towers at the Construction sites.
9. Maintain heavy lifting cables on a uniform basis.
10. Stay updated about your knowledge of crane functions and its operations.
11. Operate Tower crane as per the deployment schedule assigned by the Managers/Supervisors ;
12. To carry out daily checks of the assigned vehicle to ensure safe lifting operations at all time ;
13. Maintain assigned crane in clean and tidy working condition ;
14. Perform risk assessment of surroundings and goods to be lifted so as to ensure that the lifting operations can be carried out safely.

REQUIREMENT:

1. Certified WSHO and ECO from MOM and NEA requirement

2. At least 2 to 4 years relevant working experience in New Build environment

3. Attended Risk Management Training

4. Registered WSHO

5. Well-versed in WSH Act and requirements.

6. Possess good & positive working attitude

7. Strong interpersonal and communication skills

8. Ability to multitask and work under pressure to meet tight deadline

9. Preferably possess own transport

JOB DUTIES:

1. Assist Project Manager to identify and assess any foreseeable risk arising from the workplace

2. Conduct site safety inspection and enforce compliance of prevailing MOM Safety Acts and Regulations

3. Conduct Monthly Safety Committee meetings and put up safety reports, including safety issues

4. Regular inspection on the construction site to ensure all facilities and equipment relevant to the maintenance of environment health are in proper working condition and do not pose any environmental health hazard.

5. Supervise all workers in providing safety measures and procedures in accordance with MoM Regulations.

6. Attend to all feedback on such irregularities and inform the occupier of the construction site accordingly.

7. Proactive with excellent interpersonal skills and analytical ability.

8. Any other ad hoc duties assigned by superior.

ROLE & RESPONSIBILITIES

NX Global Engineering PTE. LTD. provides our customers with a full scale of construction, maintenance, and transportation services worldwide. We specialize in project management, quality control, and, most importantly, safety management.

We are seeking a highly skilled Deputy General Manager with expertise in the heavy haulage, construction, and maintenance sectors. The ideal candidate will manage company operations and general affairs, and collaborate closely with the Managing Director to drive the company’s strategic direction from our Japan headquarters. This role requires engineering expertise and a commitment to delivering safer, high-quality services.

Key Responsibilities:

• Oversee project schedules planning considering priority, importance, deadlines, and required man-hours, and execute multiple projects simultaneously with colleagues from the Nippon Express group.
• Supervise daily operations to ensure efficiency and effectiveness across all business activities.
• Oversee administrative functions, ensuring adherence to company policies and regulatory compliance.
• Drive the company’s direction from Japan HQ, ensuring alignment with global objectives.
• Manage and maintain relationships with clients, including Japanese clients, ensuring their needs are met with the highest standards.
• Ensure the delivery of high-quality services to customers, with a strong emphasis on safety and reliability.
• Manage project initiatives, including decision-making, quality control, and safety management.
• Promote growth and innovation within the company, fostering a culture of continuous improvement.

MINIMUM REQUIREMENTS

Education

• Bachelor's Degree

Technical Skills and Prior Experience

• At least 15 years of supervisory experience in heavy haulage, construction, and maintenance in process plants.
• Strong knowledge and experience in heavy lifting, transportation, and mechanical work.
• Proficiency in Japanese (JLPT N2 Level) in speaking, listening, and writing is essential, as the role often requires interaction with Japanese counterparts.
• IT proficient and must have strong experience with Microsoft Excel and Word.
• Proficient in project management with relevant experience and skills.
• Able to thrive in a fast-paced setting.

The ideal candidate must:

• Strong verbal and written communication skills.
• Strong interpersonal, supervisory, team player skills required.
• Possess attributes of respectfulness, honesty, integrity and flexibility
• Have the ability to cope with frequent interruptions.
• Ability to multi-task, work under pressure and meet deadlines required.
• Having experience for working in Japanese companies and understand the Japanese company culture and way of business are preferred.

Job Responsibilities:

· Responsible for work pass administration such as work pass applications, renewal, cancellation and issuance.

· On Boarding/off-boarding of workers, including arrange medical check-up, CSOC, levy bond and etc

· Calculations of workers’ overtime,payroll

· Update and keep record of workers’ leave , medical leave ,home leave

· Worker’s training – include Core Trade Renewal / New Courses and others safety related courses

· Manage Worker’s Dormitory, arrange accommodation for foreign workers.

· Update Dormitory record and the movement of foreign workers list for various project sites

· Coordinate with all departments on hiring plans, resignations, confirmation and all HR related matters.

· Assist in training related matters including coordination or enrolment of internal & external courses, update & maintain training record etc.

· Provide advice and handle all employee inquiries on HR-related matters

· Assist with day-to-day operations in the department.

· Ad HOC

Job Requirements:

·Possess min O level. A Level or a Diploma or in Human Resources or Administrative / Business Studies

·Knowledge of Employment Act, MOM regulations and HR practices is a must

·Minimum 1 Years of relevant experience.

·Working experience on worker management will be an added advantage

·Proficient in Microsoft Office Applications.

·Ability to multi-task, work independently.

·Ability to work 5.5 days with alternate saturday off

·Able to start immediately or within a short notice.

Location : Defu South

Email : [email protected]

Whatsapp : +6596989391

· Responsible for assisting Project coordinator, manager to plan, manage and ensure smooth implementation and monitor of projects assigned from inception to completion on time and of desired quality

· Responsible for assisting to manage and monitor site operation, workers and contractors

· Responsible for effective site administration which include site safety and control of materials and machinery on site

· Support the Project supervisor and manager as needed

· Ensure smooth job operations

· Able to rectify and supervise works done on site

· Other duties as assigned

Requirements:

· Having relevant working experience in construction industry / project site work is beneficial

· Able to read and write in simple English is a plus

· Good interpersonal and communication skills

· Working knowledge of construction tools, machinery and equipment

· Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems

· Organizational and Troubleshooting Skills

· Can work well in a team

· Handling complaints, settling disputes, and resolving grievances and conflicts, or otherwise negotiating with others

· Can multitask, must help to do general work if required

· Ability to focus and keep calm under pressure

· Ability to keep track of multiple projects

· Possess good work attitude

Job Responsilities:

- 5 years of experience in legal or compliance industry and overall experience of diverse industries such as ITES, Banking, Real Estate and Education.

- Specialization in Compliance and due diligence relating to the Singapore banking systems including Anti-Money Laundering screening procedures and KYC relating to Anti-Corruption Laws.

- Managing training & development lifecycle, change management, execution & delivery, gap analysis, vendor assessment & management and stakeholder communication.

- Proficient in audit workpapers, documenting audit tests and findings.

- Proficient in establishing internal control systems for audit programs.

- Ability to adapt, resourceful & dynamic with strong interpersonal, communication & problem-solving skills.

- Superior written and verbal communication skills with attention to detail.

- Able to manage and update knowledge management systems in line with the quality standards, procedures and process changes.

- Organise quality audits, identify training needs and analyse results to support the wider operation.

- Regular testing, monitoring, reporting and sharing data driven insights with the relevant stakeholders.

- Cross-departmental collaboration.