Job Responsibilities:

• To drive the Company’s truck for the collection and transportation of waste.
• To assist in the collection of waste from clients’ premises.
• To ensure that the containers/bins are properly secured/lashed to the truck, before driving off.
• To assist in the unloading, segregation, and storage of the waste.
• To comply with all Traffic rules, and to practice safe driving habits while driving the Company’s trucks.
• To comply with all anti-littering laws and to this end, ensure that proper containers/bins are used to hold the waste, for safe transportation.
• To perform daily maintenance of the Company’s trucks.
• In discharging the above duties, adhere to all Warehouse Safety Rules, and observe safe work practices.

Requirements:

• Possessing a Class 4 or 5 driving license
• With hook-lift trucks with roll-on container experience preferred.

Repair and maintenence of heavy vehicle and ground support equipments (i.e. prime mover, trailer, fork lift, boom lift, bus, tractor, bulldozer, excavator, etc.)

- Perform preventive and corrective maintenance.

- Diagnose and trouble shoot vehicle faults.

- Carry out overhaul job (i.e. engine, brake, transmission, etc.)

- Replace worn out parts and installation of components.

- Prepare vehicle for statutory inspection and PE certification.

- Carry our corrosion repair and refurbishment.

- Other task that may be assigned from time-to-time.

Job Description

1. Execution of projects and liaison with the client, consultants, contractor and authorities
2. Plan and ensure that programme of works is updated to meet the contract deadline based on progress of work
3. prepare method of statement
4. Support Quantity Surveyors in conducting site measurement and inspections
5. To ensure works are in compliance to quality procedures and within standard workmanship requirements

Requirements

• possess degree in Civil Engineering from recognized by professional Engineering Board
• 3 to 5 years’ working experience /fresh graduates are welcome
• Proficient in MS Office, MS Project, AutoCad/BIM
• preferably with driving licence

Interested applicant, please send updated resume and state expected salary. Kindly note that only shortlisted candidates will be notified.

Job Description

• Industry/ Organization Type: Manufacturing (Electronics)
• Position Title: Engineering Assistant / Assistant QA Engineer
• Working Location: Pioneer (Nearby MRT station)
• Working Hours: 5 days (Monday to Friday, 7.45 AM – 4.45 PM)
• Salary Package: Basic Salary up to $3,000 + Transport Allowance + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain all lab equipment.
• Perform daily analysis of plating chemicals.
• Calculate the required top-up amounts for plating chemicals.
• Update control charts and ensure all analysis results are accurately recorded.
• Calibrate lab and wastewater treatment plant’s ORP meters in-house.
• Review and update work instructions for the lab and wastewater treatment plant as needed.
• Ensure smooth operation of auto-analyzers for treated effluents.
• Monitor and maintain inventory for "Quick Test Kits" used for daily effluent checks.
• Keep the plating laboratory clean and organized following 5S housekeeping principles.
• Complete other tasks assigned by the supervisor.
• Manage product/process Control Plan, FMEA, and Process Flow.
• Assist with internal and external audits when required.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum Diploma in Engineering or relevant
• Has minimum of 3 years' relevant working experience in a manufacturing environment
• Proficient in Microsoft Office software applications.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67166 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Engineering Manager to join their Engineering team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities of Engineering Manager:

• Design and implement effective warehouse layouts and storage solutions.
• Lead and oversee warehouse projects from planning to execution.
• Select and manage the appropriate equipment for operational efficiency.
• Collaborate to optimize space utilization, streamline processes, and reduce costs.
• Analyze data to develop logistics strategies and improve productivity.
• Identify and validate storage solutions to boost capacity.
• Provide coaching and support to operational teams.
• Present and demonstrate process improvements to stakeholders.

Requirements:

• Min Degree in Engineering
• Min 2 years of warehouse automation experience in managerial level
• Strong communication and interpersonal skills required.
• Proficient in Microsoft Office and AutoCad

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Specialist (QA)

• Salary Range: $2600 - $3000 ; Office hour (8am - 5pm)
• ITE/Diploma in Mechanical Engineering / Mechatronics Engineering
• Entry level are welcome to apply; able to speak to chinese suppliers when necessary
• Perform, document internal audits and other quality assurance activities

Specialist (Production)

• Salary Range: $2600 - $3000 ; Office hour (8am - 5pm)
• ITE/Diploma in Mechanical Engineering / Mechatronics Engineering
• Entry level are welcome to apply; able to speak to chinese suppliers when necessary
• Comfortable working in Cleanroom environment
• Planning & Co-coordinating the workflow on production lines to achieve production targets

Specialist (Maintenance)

• Salary Range: $3000 - $3500 ; Office hour (8am - 5pm)/able to commit shift when required
• ITE/Diploma in Electrical /Mechatronic Engineering
• At least 2 - 3 years related working experience
• Able to do PLC, HMI, programming with Mitsubishi and Omron brand.
• Experience in handling Mitsubishi and Omron product servo motor products.
• Understanding and being able to design automation electrical circuits.

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

• Assist in design confirmation and installation for chilled water units On-site assistant between installer and in house services Back end support for OMM preparation and drawing updates
• Monitoring of work scheduling and update accordingly
• To assist Mechanical engineer in basic trouble shooting of Fire Alarms, Pumps and Door system etc.
• Assist Mechanical engineer on daily operations such as breakdown maintenance, preventive maintenance, and any ad-hoc work request.
• Collation of monthly breakdown fault reports for submission to Client.
• Any other related works to be assigned

Requirement:

• Pursuing or completed a Bachelor's degree in a relevant field
• Strong communication skills: Ability to express ideas clearly, both verbally and in writing, and actively engage in team discussions.
• Detail-oriented: Strong attention to detail and accuracy when working with data, documents, or any other tasks.
• Problem-solving mindset: Ability to think critically, analyze information, and propose practical solutions to challenges.

Client: Engineering Industry

Location: Islandwide, 8.30am - 6pm

Salary: $2500 - $4000 (Based on experience and capability)

• Diploma / Degree in Mechanical/Electrical Engineering or ACMV related discipline.
• Experience in checking and diagnosing fault in the Chilled water Fan Coil (CHWFCU) and Air Handling Units (AHU) installed in various sites.
• Examination of critical components, inspection of electrical connections and analysis of operation parameters, such as, temperatures, pressures, noises and vibrations.
• Able to communicate effectively with customers to resolve complaints.
• Coordinate with factory and contractors to ensure efficient job execution.
• Assist in schedule planning and prepare reports for management review.

TO APPLY:

Please send in a detailed resume to [email protected] / Whatsapp 89101675.

Subject: ACMV Engineer / Eng Asst > IMMED

• State your last drawn salary and Expected salary (With current & previous employers)
• The notice required and availability date
• Reason for leaving each employment

NOTE: ** Our Consultants will contact you if shortlisted.

Take Care, Stay Safe & God Bless.

MOM Certified: R 1103510

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Engineering Manager to join their Engineering team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities of Engineering Manager:

• Design and implement effective warehouse layouts and storage solutions.
• Lead and oversee warehouse projects from planning to execution.
• Select and manage the appropriate equipment for operational efficiency.
• Collaborate to optimize space utilization, streamline processes, and reduce costs.
• Analyze data to develop logistics strategies and improve productivity.
• Identify and validate storage solutions to boost capacity.
• Provide coaching and support to operational teams.
• Present and demonstrate process improvements to stakeholders.

Requirements:

• Min Degree in Engineering
• Min 2 years of warehouse automation experience in managerial level
• Strong communication and interpersonal skills required.
• Proficient in Microsoft Office and AutoCad

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Salary: up to $3200

Duration: 1 year contract

Working Days & Hours: Mon-Fri Office Hours

Location: Jurong East

Job Scope:

• Set up and operate EUT (equipment under test).
• Perform electrical and mechanical testing of products in accordance with standards.
• Compile test results, raw data, and product description information into report templates and shells. Submit report to reviewer for final approval.
• Update test status and test results to engineers/managers.
• Following sample handling procedures, ensure that sample is logged into and out of the system. Move equipment as needed through the facility. Properly package sample for shipment.
• Perform other work as required.

Job Requirements:

• Min NITEC/Diploma in Electrical / Electronic Engineering
• Min. 1-2 years relevant experience
• Knowledge of ISO Quality Management System (i.e. ISO/IEC 17025 and ISO 9001) will be an added advantage.

For interested applicants, please send your updated resume to: [email protected]

All candidates’ information will be treated with the strictest confidence

Melissa Zhang Zhiqi (Mezzo)

R2197564

Recruit Express Pte Ltd

99C4599

• We are looking for an Elevator Mechanic with decent years of experience in elevator installation/maintenance to join us. You should be able to examine and resolve any mechanical and system malfunctions. Besides, you will be responsible for performing timely maintenance checks.
• You should have complete knowledge of safety procedures and installation steps. Moreover, your technical background will be helpful in interpreting blueprints. In addition to this, you should be able to assist people stuck in elevators or those facing machine operational issues.
• Should be able to lead a team of installers and complete the project
• must have good knowledge of Safe work dismantling for Modernization jobs
• must know installation of peele doors
• KONE experience of minimum 4 years preffered

• We are looking for an Elevator Mechanic with decent years of experience in elevator installation/maintenance to join us. You should be able to examine and resolve any mechanical and system malfunctions. Besides, you will be responsible for performing timely maintenance checks.
• You should have complete knowledge of safety procedures and installation steps. Moreover, your technical background will be helpful in interpreting blueprints. In addition to this, you should be able to assist people stuck in elevators or those facing machine operational issues.
• Should be able to lead a team of installers and complete the project
• must have good knowledge of Safe work dismantling for Modernization jobs
• must know installation of peele doors
• KONE experience of minimum 4 years preffered

Salary: up to $3200

Duration: 1 year contract

Working Days & Hours: Mon-Fri Office Hours

Location: Jurong East

Job Description:

· Set up and operate EUT (equipment under test).

· Perform electrical and mechanical testing of products in accordance with standards.

· Compile test results, raw data, and product description information into report templates and shells. Submit report to reviewer for final approval.

· Update test status and test results to engineers/managers.

· Following sample handling procedures, ensure that sample is logged into and out of the system. Move equipment as needed through the facility. Properly package sample for shipment.

· Perform other work as required.

Job Requirements: Min NITEC/Diploma in Electrical / Electronic Engineering with preferably 3 years of relevant experience w Knowledge of ISO Quality Management System (i.e. ISO/IEC 17025 and ISO 9001) will be an added advantage.

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Roles & Responsibilities

1. To carry out preventive maintenance and servicing of industrial and commercial ACMV Equipments (FCU, AHU, Chillers, Pumps and Cooling Tower).

2. To diagnose problems, troubleshoot equipment fault and carry out repair and chemical overhaul works.

3. To provide recommendations and appropriate solutions to ensure continuous system operations including propose and upsell aircon services to customers.

4. To conduct testing and commissioning of newly installed aircon system.

5. To ensure all works carried out are in accordance with safety procedures.

6. To ensure proper documentation of service report (write in English) for customer endorsement.

7. To attend any other ad hoc duties assigned by reporting manager or management.

Requirements

1. Diploma / Degree in Mechanical or Electrical / Electronic Engineering.

2. 8 Years of working experience in servicing single / multi split unit and VRV System.

3. Must be able to handle physical work due to job nature.

4. Self-motivated and hardworking.

5. Able to write and communicate in English.

6. Possess a Singapore Class 3 Driver's License is a must (vehicle provided by company).

7. 6 Days workweek (8.30 AM to 5.30 PM).

8. Wiling to work on Sunday to attend emergency repairs and customer complaints.

9. Preferably with a certification BCA License (Aircon License) - Installation of structural supports for Aircon Units or equivalent.

10. Knowledge in SCDF Safety Requirements for handling of R32 Gas.

11. This position is open to Singaporeans and Singapore PR only.

12. SGD $2,000 - $ 3,180

About the Company:

Our client is registered with the Building and Construction Authority (BCA) in the category General Building (CW-01) as Grade A1. It is also accredited to ISO 9001, 14001 and 45001 as well as various accolades such as;

• Built Environment Leadership Award (GOLD)
• Green & Gracious Builder Award (STAR)
• Workplace Safety and Health Award
• bizSAFE Partner Certificate

About the Role:

Are you a visionary engineering leader with a passion for driving innovative construction projects? We’re seeking an Engineering Manager to lead and elevate the company's engineering and design efforts, from conceptualization to execution. In this role, you will be at the forefront of developing cutting-edge designs, managing project risks, guiding your team through every stage of development, and ensuring seamless project execution.

Key Responsibilities:

• Project Vision: Define and support the project scope and requirements, from initial feasibility studies to detailed design development.
• Design Excellence: Drive the creation of conceptual and detailed engineering designs, ensuring technical feasibility and alignment with project goals. Develop engineering analysis models to preempt design conflicts and support sustainability practices.
• Risk Management: Conduct thorough risk assessments to identify potential challenges and develop effective mitigation strategies.
• Tendering & Compliance: Assist in preparing project estimates, schedules, and tender documents. Ensure all legislative and regulatory requirements are met throughout the project lifecycle.
• Execution Oversight: Liaise with contractors and subcontractors to ensure accurate execution of designs. Oversee site coordination, safety compliance, and testing processes to ensure successful project handovers.
• Leadership: Provide guidance and support to engineering teams, fostering a collaborative environment to drive performance and innovation.

Qualifications and Skills:

• Education: Recognized Degree in Civil and/or Structural Engineering or a related field.
• Experience: 7-10 years of experience in the Singapore Construction Industry, with expertise in high-rise commercial, mixed-use developments, semiconductor factories, or healthcare building projects.
• Certifications: Certificate in Construction Safety Course for Project Managers.
• Skills: Strong leadership, time management, analytical, and interpersonal skills. Proficient in implementing construction project management practices and skilled in guiding diverse, multi-functional teams.
• Attributes: Detail-oriented, analytical, and proactive with a positive work attitude. Adept at problem-solving and effective stakeholder management.

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button

*We regret to inform that only shortlisted candidates will be informed.*

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

Job Description

• Understand project requirements and concepts
• To liaise with consultants, supervisors, QS and the general workforce involved in the project,
• Oversee drawing management and control of technical document
• Coordinate of document submission to client and appropriate agencies.
• Collaborate with project teams on drawings and documentation for distribution and filling.
• Assist with engineering-related documentation and administration, as well as any other responsibilities that may be assigned from time to time.
• Provide daily work plan to site team and coordinate on progress.
• Participate in Key Site surveys, Installation works as per works requirement .
• Work closely with Project Manager to ensure timely completion of project.
• Any other duties assigned by the top management from time to time.

Job Requirements

• Minimum 3-5 years local experience in construction industry required.
• Able to work independently and working in construction working environment.
• Recognized Diploma/Degree in Civil Engineering or its relevant
• AutoCAD
• Microsoft Office
• Initiative and Self Motivated

Responsibility:

1. Report to work as instructed by the Supervisor (Reporting time may vary depend on the job request received by the Supervisor)

2. Receive the Job sheet and Test Request Form from the Supervisor

3. Verify the Test Request Form and call client to confirm the test quantity / description etc

4. Collect the equipment from Supervisor and verify the working condition of the equipment / Calibration validity and all other data’s are correct prior to mobilize to site

5. Take appropriate test chemicals and PPE for the test assigned on that day

6. Make sure the test procedure / standards / acceptance criteria available with him prior to mobilization

7. Follow the transport mode instructed by the Supervisor and should reach to site on time as requested by the Client / Client’s representative

8. Ensure all the items required test are in order and asses the environment is suitable to conduct the requested test without Safety issues

9. Use appropriate PPE and conduct the test as per code / standard

10. Ensure the Quality and Quantity are in order and no complaints / comments (negative) from the Client / Client’s representative

11. Collect all the relevant information’s / technical data’s for reporting from the Client / Client’s representative and take photographs if allowed / necessary

12. Follow the transport mode instructed by the Supervisor and back to Setsco directly from site.

13. Prepare Preliminary test report and submit to the Supervisor with relevant details / drawings / photographs etc

14. Verify the test reports after typing and sign the reports accordingly

15. Other ad-hoc duties as assigned by supervisor

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Engineering Manager to join their Engineering team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities of Engineering Manager:

• Design and implement effective warehouse layouts and storage solutions.
• Lead and oversee warehouse projects from planning to execution.
• Select and manage the appropriate equipment for operational efficiency.
• Collaborate to optimize space utilization, streamline processes, and reduce costs.
• Analyze data to develop logistics strategies and improve productivity.
• Identify and validate storage solutions to boost capacity.
• Provide coaching and support to operational teams.
• Present and demonstrate process improvements to stakeholders.

Requirements:

• Min Degree in Engineering
• Min 2 years of warehouse automation experience in managerial level
• Strong communication and interpersonal skills required.
• Proficient in Microsoft Office and AutoCad

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Accesstech is a rapidly expanding group of companies with interest in Engineering Construction, Telecommunications and Investments.

Founded in 1998 in Singapore with our principal business in high-tech factory engineering, we have since extended our expertise into commercial projects with luxury hotels and commercial properties.

The Project Office team is currently looking for a suitable candidate to join us as a BIM Modeller (3 vacancies) to drive the ongoing and new projects in the company.

Responsibilities

• Produce 2D and BIM drawing for Electrical System. Include Single line, layout and system schematic.
• Create Combined Services Drawings (CSD) and resolve CSD issues.
• Prepare and present 3D models during BIM meetings.
• Prepare drawings submission format, including title block, notes and legends, drawing to scale, etc.
• To attend site walk as and when required by the Engineers and Managers.
• Monitor and ensure drawing submission schedule is achieved
• Manage process of exchange and coordination of BIM model with consultants, client and stakeholders.

Qualifications & Experience:

• Certificate in AutoCAD Autodesk advanced module.
• Certificate in Revit MEP Autodesk advanced module.
• Higher NITEC / Diploma in Mechanical engineering or equivalent.
• Minimum 3-5 years of experience in M&E drafting using AutoCAD, Revit and BIM preferably from Construction industry.
• Outgoing personality with strong interpersonal and communication skills.
• Ability to work independently and target oriented in a stressful environment.
• Ability to work well in a team and demonstrate initiative and commitment.
• To be able to converse in English and work effectively with Internal staff including Site Foreman, Supervisors, Engineers, Managers and Client’s BIM representatives.

Only Shortlisted Candidates will be notified.

3 Vacancies.

Duties & Responsibilities:

• Look into the company’s BIM Project Deployment Plan and develop BIM Project Execution Plans, BIM collaboration, documentation, enforcement, monitoring and workflow to meet the project.
• Work closely with project teams to provide solutions for BIM related technical issues. Assist project teams and design teams with BIM implementation
• Set up processes & workflows for efficient delivery of the project BIM deliverables.
• Set guidelines for internal and external model exchanges between project stakeholders and monitor its progress
• Attend client meetings & lead the decision-making process affecting the BIM deliverables
• Liaise and coordinate and other trades for cross-team support on BIM software
• Regularly meet with key project staff to update on progress. Document meeting minutes highlighting key action point. Ensure the issues highlighted are resolved, concluded and monitored for resolution provided by the design team.
• To oversee the BIM Coordination and daily management of BIM project data sets/workflows and project set up
• Collaborate with team and other relevant departments to ensure all drawings are in order as per design requirements.
• Any other duties deemed necessary and as assigned by the Senior Management.

Qualifications & Experience:

• Certificate in AutoCAD Autodesk advanced module.
• Certificate in Revit MEP Autodesk advanced module.
• Higher NITEC / Diploma in Mechanical engineering or equivalent.
• Minimum 3 years of experience in M&E drafting using AutoCAD, Revit and BIM preferably from Construction industry.
• Outgoing personality with strong interpersonal and communication skills.
• Ability to work independently and target oriented in a stressful environment.
• Ability to work well in a team and demonstrate initiative and commitment.
• To be able to converse in English and work effectively with Internal staff including Site Foreman, Supervisors, Engineers, Managers and Client’s BIM representatives.

1. Responsible for I&C engineering related matters.
2. Communicate and coordinate with team and all related stakeholders for planning and scheduling to facilitate smooth commissioning at site.
3. Ensure instrument and control elements installation and wire termination are done correctly and within acceptable standard of workmanship.
4. Enforce PSE and MEP to rectify any substandard works to ensure good quality of works for reliable operation.
5. Lead on-site testing and commissioning of chilled water control system, conduct thorough testing, and validation of control system to ensure proper functionality.
6. Documentation and records of T&C.
7. Handover control system to operation team in timely manner.
8. Respond to operational needs, ensure reliable control and monitoring of control system.
9. Configuration and zeroing of instrument, ensure accurate reading received at control system.

Accesstech is a rapidly expanding group of companies with interest in Engineering, Construction, Telecommunications and Investments.

Founded in 1998 with our principal business in high-tech factory engineering, we have since extended our expertise into commercial projects with luxury hotels and commercial properties.

The Project team is currently looking for a suitable candidate to join us as a Project Engineer (Electrical) to drive the ongoing and new projects in the company.

Role and Responsibilities:

• Plan and manage multiple engineering projects from conceptual development to handover, within budget, deliver on time, safety alertness and the required quality.
• Able to prioritize tasks and assign manpower to ensure that the overall resources are used effectively and within project deadlines.
• Assist to prepare bid tender for new projects and ensure project compliance with company policy and guideline.
• Evaluate and authorize changes that significantly impact the scope budget or timeline of a project.
• Lead the most complex or critical engineering projects, monitor progress and performance against the project plan.
• Identify and resolve operational problems and minimize delays.
• Select, guide and develop a team of project member with operational responsibilities to ensure that the organization achieves it business objectives and complies with all relevant regulations and laws.
• Ensure that organization and government standards on safety are met and ensure customer safety & quality specifications are consistently met.
• Allocate capital and human resources to maximize productivity and supervise and implement project expense, other assets and resource within budget.
• Analyze and approve project investments that best meet the organization needs.

Qualifications & Experience:

• Professional Qualifications in Related Field of studies.
• Possess 2 to 5 years relevant experience in the Construction Engineering industry.
• Outgoing with strong interpersonal and communication skills.
• Ability to work independently and target oriented in a fast-paced environment.
• Ability to interact effectively with project members and managers at all levels.

Candidates with relevant experience may be offered Senior Project Engineer role.

Work Location: Eastern part of Singapore

Only shortlisted candidates will be contacted.

Duties & Responsibilities:

Cost Estimation:
•Prepare detailed cost estimates for MEP (Mechanical, Electrical, Plumbing) projects;
•Analyze and evaluate project specifications and drawings to determine the scope of work and associated costs;

Quantity Take-off
•Perform quantity take-offs for materials and labour required for MEP installations;
•Collaborate with project teams to ensure accurate and comprehensive quantity assessments;

Budgeting and Cost-control
•Develop and manage project budgets, ensuring cost control throughout the project lifecycle;
•Monitor and report on cost variations, providing recommendations for cost-saving measures;

Tendering and Procurement
•Assist in the preparation of tender documents and participate in the procurement process;
•Evaluate subcontractor and supplier bids, ensuring competitiveness and adherence to project requirements;

Contract Administration
•Administer and manage contracts related to MEP works, including variations and claims;
•Monitor contractual compliance and resolve any disputes that may arise during the project;

Value Engineering
•Identify opportunities for value engineering to optimize project costs without compromising quality;
•Work closely with design and construction teams to implement value engineering recommendations;

Risk Management
•Identify and assess potential risks related to cost and contract issues;
•Develop strategies to mitigate risks and ensure project success;

Cost Reporting
•Generate regular cost reports to keep stakeholders informed of project financial status;
•Provide analysis and recommendations based on cost reporting data;

Collaboration
•Collaborate with architects, engineers, contractors, and other project stakeholders;
•Participate in project meetings and contribute to the overall success of the project;

Regulatory Compliance
•Ensure compliance with relevant regulations and standards in MEP construction;
•Stay updated on industry trends, codes, and best practices;

Ad-Hoc
•Undertake cost analysis for repair and maintenance project work;
•Other Ad-hoc duties as assigned by the HOD.

Qualifications & Experience:
• Degree / Diploma in Quantity Surveying / Engineering or equivalent from a recognized University.

• Minimum 5 years of related working experiences in industrial, commercial or data-centre projects.

• Good working knowledge in Mechanical and Electrical.

• Organizational skill with attention to detail, adaptable and flexible.

• Good communication and facilitation skills.

• Ability to work well in a team, independently and demonstrate initiative and commitment.

Job Description:

· Preparing tenders for clients and commercial bids to help bring in new business

· Developing and presenting project proposals

· Meeting with clients to find out their requirements

· Producing plans and estimating budgets and timescales

· Discussing, drafting, reviewing and negotiating the terms of business contracts

· Agreeing budgets and timescales with the clients

· Managing construction schedules and budgets

· Dealing with any unexpected costs

· Attending site meetings to monitor progress

· Acting as the main point of contact for clients, site and project managers

· Working with third parties to ensure that everyone understands their roles and responsibilities

· Making sure construction projects meet agreed technical standards

· Liaising with technical and financial staff, sub-contractors, legal teams and the client’s own representatives

· Working on-site and in an office.

· Work with Director & Project Team to resolve any contractual disputes arising in the projects. Investigate and resolve or refer as appropriate disputes/complaints in accordance with contractual requirements in a timely manner

· Oversee overall planning and execution to ensure optimization of resources and manpower and invoicing at the end of a project

· Provide advice on contractual claims and procurement strategy.

· Analyze outcomes and write detailed progress reports.

· Value completed work and make progress claims.

· Track of any variations for ongoing projects that may affect costs.

· Undertake cost analysis for repair and maintenance project work.

· Prepare and submit catalogues and sample boards.

Other ad-hoc duties as assigned by the HOD’s.

Job Requirement

Qualifications & Experience:

· Degree / Diploma in Quantity Surveying / Building or equivalent from a recognized University.

· Minimum 5 years of related working experience in residential and industrial projects.

· Good working knowledge in Mechanical and Electrical.

· Good knowledge of Singapore health and safety rules and regulations.

· Ability to use software tools for costing and budgeting.

· Organizational skill with attention to detail, adaptable and flexible

· Good communication and facilitation skills.

· Ability to work well in a team as well as independently and demonstrate initiative and commitment.

· An understanding of the construction industry

· An understanding of legal documentation

· Maths and IT knowledge

· Strong leadership skills

· Business management skills

· The ability to use your initiative

· Good verbal communication skills

Duties & Responsibilities:

• Lead EHS department.
• Develop, review, revise, maintain and implement EHS Management System.
• Ensure legal compliance as per statutory requirements.
• Conduct regular EHS inspections and audits.
• Manage contractor from the EHS perspective.
• To investigate all incidents on the work site and implement correction actions.
• Review and revise all risk assessments to ensure compliance.
• Able to drive EHS culture in the company
• Conduct routine checks on general safety practices and propose corrective actions and measures to be taken.
• Ensure adequacy, effectiveness and readiness of fire protection system and Emergency Response Team management system for Office and Factory.
• Ensure inspection and review of all project sites activities and operation (includes Main office and 15 Changi Factory) and alert relevant Section Head of any machinery, equipment, appliance, activity or process used in each department that exposes any person to the risk of bodily injury, and to recommend appropriate corrective measures.
• Promote safe and healthy working conditions through education, awareness campaigns, training courses, drills, competitions, contests and other activities.
• Liaise with statutory bodies on EHSS-related licenses and permits and keep updated on the latest change in regulations and Acts and be conversant with all waste management regulations, procedures and licensing requirements.
• Conduct fire and safety training to employees.
• Constant update to management of EHSS performance and the continual improvement plan.
• Liaise with 3rd party security service provider and ensure the appropriateness and effectiveness of services rendered to organisation.
• Constant plan-do-check-act on the related EHSS matter of plant's Environmental, Health and Safety Management System and ensure continual improvement/upgrading of the system.

Qualifications & Experience:

• Diploma in Workplace, Safety and Health with 8 years relevant working experience in Construction Engineering Industry.
• Degree in Workplace, Safety and Health with 5 years relevant working experience in Construction Engineering Industry.
• Strong technical competency, good interpersonal and communication skills.
• Ability to work independently and target oriented in a stressful environment.
• Ability to interact effectively with colleagues in other business units.